Newer
Older
/**
* This DF represents a position in a two- or three-dimensional cartesian coordinate system.
*
* It includes the following components:
*
* @field xCoordinate: the X coordinate value.
*
* @field yCoordinate: the Y coordinate value.
*
* @field zCoordinate: the optional Z coordinate value.
*
* @category: GeoReference information
* @revision: Created in V2.1.1
*/
CartesianPosition3d::=SEQUENCE{
xCoordinate CartesianCoordinate,
yCoordinate CartesianCoordinate,
zCoordinate CartesianCoordinate OPTIONAL
}
4023
4024
4025
4026
4027
4028
4029
4030
4031
4032
4033
4034
4035
4036
4037
4038
4039
4040
4041
4042
4043
4044
/**
* This DF is a representation of the cause code value of a traffic event.
*
* It includes the following components:
*
* @field causeCode: the main cause of a detected event.
*
* @field subCauseCode: the subordinate cause of a detected event.
*
* The semantics of the entire DF are completely defined by the component causeCode. The interpretation of the subCauseCode may
* provide additional information that is not strictly necessary to understand the causeCode itself, and is therefore optional.
*
* @note: this DF is kept for backwards compatibility reasons only. It is reccomended to use the @ref CauseCodeV2 instead.
*
* @category: Traffic information
* @revision: Editorial update in V2.1.1
*/
CauseCode ::= SEQUENCE {
causeCode CauseCodeType,
subCauseCode SubCauseCodeType,
...
}
4046
4047
4048
4049
4050
4051
4052
4053
4054
4055
4056
4057
4058
4059
4060
4061
4062
4063
4064
4065
4066
4067
4068
4069
4070
4071
4072
4073
4074
4075
4076
4077
4078
4079
4080
4081
4082
4083
4084
4085
4086
4087
4088
4089
4090
4091
4092
4093
4094
4095
4096
4097
4098
4099
4100
4101
4102
4103
4104
4105
4106
4107
4108
4109
4110
4111
4112
4113
4114
4115
4116
4117
4118
4119
4120
4121
4122
4123
4124
4125
4126
4127
4128
4129
4130
4131
4132
4133
4134
4135
4136
4137
4138
4139
4140
4141
4142
4143
4144
4145
4146
4147
4148
4149
4150
4151
4152
4153
4154
4155
4156
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169
4170
4171
4172
4173
4174
4175
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186
4187
4188
4189
4190
4191
4192
4193
4194
4195
4196
4197
4198
4199
4200
4201
4202
4203
/**
* This DF is a representation of the cause code value and associated sub cause code value of a traffic event.
*
*
* @note: this DF is defined for use as part of CauseCodeV2. It is recommended to use CauseCodeV2.
* @category: Traffic information
* @revision: Editorial update in V2.1.1
*/
CauseCodeChoice::= CHOICE {
reserved SubCauseCodeType,
trafficCondition TrafficConditionSubCauseCode,
accident AccidentSubCauseCode,
roadworks RoadworksSubCauseCode,
reserved4 SubCauseCodeType,
impassability SubCauseCodeType,
adverseWeatherCondition-Adhesion AdverseWeatherCondition-AdhesionSubCauseCode,
aquaplannning SubCauseCodeType,
reserved8 SubCauseCodeType,
hazardousLocation-SurfaceCondition HazardousLocation-SurfaceConditionSubCauseCode,
hazardousLocation-ObstacleOnTheRoad HazardousLocation-ObstacleOnTheRoadSubCauseCode,
hazardousLocation-AnimalOnTheRoad HazardousLocation-AnimalOnTheRoadSubCauseCode,
humanPresenceOnTheRoad HumanPresenceOnTheRoadSubCauseCode,
reserved13 SubCauseCodeType,
wrongWayDriving WrongWayDrivingSubCauseCode,
rescueAndRecoveryWorkInProgress RescueAndRecoveryWorkInProgressSubCauseCode,
reserved16 SubCauseCodeType,
adverseWeatherCondition-ExtremeWeatherCondition AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode,
adverseWeatherCondition-Visibility AdverseWeatherCondition-VisibilitySubCauseCode,
adverseWeatherCondition-Precipitation AdverseWeatherCondition-PrecipitationSubCauseCode,
violence SubCauseCodeType,
reserved21 SubCauseCodeType,
reserved22 SubCauseCodeType,
reserved23 SubCauseCodeType,
reserved24 SubCauseCodeType,
reserved25 SubCauseCodeType,
slowVehicle SlowVehicleSubCauseCode,
dangerousEndOfQueue DangerousEndOfQueueSubCauseCode,
reserved28 SubCauseCodeType,
reserved29 SubCauseCodeType,
reserved30 SubCauseCodeType,
reserved31 SubCauseCodeType,
reserved32 SubCauseCodeType,
reserved33 SubCauseCodeType,
reserved34 SubCauseCodeType,
reserved35 SubCauseCodeType,
reserved36 SubCauseCodeType,
reserved37 SubCauseCodeType,
reserved38 SubCauseCodeType,
reserved39 SubCauseCodeType,
reserved40 SubCauseCodeType,
reserved41 SubCauseCodeType,
reserved42 SubCauseCodeType,
reserved43 SubCauseCodeType,
reserved44 SubCauseCodeType,
reserved45 SubCauseCodeType,
reserved46 SubCauseCodeType,
reserved47 SubCauseCodeType,
reserved48 SubCauseCodeType,
reserved49 SubCauseCodeType,
reserved50 SubCauseCodeType,
reserved51 SubCauseCodeType,
reserved52 SubCauseCodeType,
reserved53 SubCauseCodeType,
reserved54 SubCauseCodeType,
reserved55 SubCauseCodeType,
reserved56 SubCauseCodeType,
reserved57 SubCauseCodeType,
reserved58 SubCauseCodeType,
reserved59 SubCauseCodeType,
reserved60 SubCauseCodeType,
reserved61 SubCauseCodeType,
reserved62 SubCauseCodeType,
reserved63 SubCauseCodeType,
reserved64 SubCauseCodeType,
reserved65 SubCauseCodeType,
reserved66 SubCauseCodeType,
reserved67 SubCauseCodeType,
reserved68 SubCauseCodeType,
reserved69 SubCauseCodeType,
reserved70 SubCauseCodeType,
reserved71 SubCauseCodeType,
reserved72 SubCauseCodeType,
reserved73 SubCauseCodeType,
reserved74 SubCauseCodeType,
reserved75 SubCauseCodeType,
reserved76 SubCauseCodeType,
reserved77 SubCauseCodeType,
reserved78 SubCauseCodeType,
reserved79 SubCauseCodeType,
reserved80 SubCauseCodeType,
reserved81 SubCauseCodeType,
reserved82 SubCauseCodeType,
reserved83 SubCauseCodeType,
reserved84 SubCauseCodeType,
reserved85 SubCauseCodeType,
reserved86 SubCauseCodeType,
reserved87 SubCauseCodeType,
reserved88 SubCauseCodeType,
reserved89 SubCauseCodeType,
reserved90 SubCauseCodeType,
vehicleBreakdown VehicleBreakdownSubCauseCode,
postCrash PostCrashSubCauseCode,
humanProblem HumanProblemSubCauseCode,
stationaryVehicle StationaryVehicleSubCauseCode,
emergencyVehicleApproaching EmergencyVehicleApproachingSubCauseCode,
hazardousLocation-DangerousCurve HazardousLocation-DangerousCurveSubCauseCode,
collisionRisk CollisionRiskSubCauseCode,
signalViolation SignalViolationSubCauseCode,
dangerousSituation DangerousSituationSubCauseCode,
railwayLevelCrossing RailwayLevelCrossingSubCauseCode,
reserved101 SubCauseCodeType,
reserved102 SubCauseCodeType,
reserved103 SubCauseCodeType,
reserved104 SubCauseCodeType,
reserved105 SubCauseCodeType,
reserved106 SubCauseCodeType,
reserved107 SubCauseCodeType,
reserved108 SubCauseCodeType,
reserved109 SubCauseCodeType,
reserved110 SubCauseCodeType,
reserved111 SubCauseCodeType,
reserved112 SubCauseCodeType,
reserved113 SubCauseCodeType,
reserved114 SubCauseCodeType,
reserved115 SubCauseCodeType,
reserved116 SubCauseCodeType,
reserved117 SubCauseCodeType,
reserved118 SubCauseCodeType,
reserved119 SubCauseCodeType,
reserved120 SubCauseCodeType,
reserved121 SubCauseCodeType,
reserved122 SubCauseCodeType,
reserved123 SubCauseCodeType,
reserved124 SubCauseCodeType,
reserved125 SubCauseCodeType,
reserved126 SubCauseCodeType,
reserved127 SubCauseCodeType,
reserved128 SubCauseCodeType
}
/**
* This DF is an alternative representation of the cause code value of a traffic event.
*
* It includes the following components:
*
* @field ccAndScc: the main cause of a detected event. Each choice is of a different type and represents the sub cause code.
*
* The semantics of the entire DF are completely defined by the component causeCode. The interpretation of the subCauseCode may
* provide additional information that is not strictly necessary to understand the causeCode itself, and is therefore optional.
*
* @category: Traffic information
* @revision: Created in V2.1.1
*/
CauseCodeV2 ::= SEQUENCE {
ccAndScc CauseCodeChoice,
...
/**
* The DF describes the position of a CEN DSRC road side equipment.
*
* It includes the following components:
*
* @field protectedZoneLatitude: the latitude of the CEN DSRC road side equipment.
*
* @field protectedZoneLongitude: the latitude of the CEN DSRC road side equipment.
*
* @field cenDsrcTollingZoneID: the optional ID of the CEN DSRC road side equipment.
*
* @category: Infrastructure information, Communication information
* @revision: V1.3.1
*/
CenDsrcTollingZone ::= SEQUENCE {
protectedZoneLatitude Latitude,
protectedZoneLongitude Longitude,
cenDsrcTollingZoneID CenDsrcTollingZoneID OPTIONAL,
...
}
4227
4228
4229
4230
4231
4232
4233
4234
4235
4236
4237
4238
4239
4240
4241
4242
4243
4244
4245
4246
4247
4248
/**
*
* This DF represents the shape of a circular area or a right cylinder that is centred on a reference position defined outside of the context of this DF.
*
* It includes the following components:
*
* @field nodeCenterPoint: optional offset point which the rectangle is centred on with respect to the reference position.
*
* @field radius: the radius of the circular area.
*
* @field height: the optional height, present if the shape is a right cylinder extending in the positive z-axis.
*
*
* @category: GeoReference information
* @revision: Created in V2.1.1
*/
CircularShape ::= SEQUENCE {
nodeCenterPoint CartesianPosition3d OPTIONAL,
radius StandardLength12b,
height StandardLength12b OPTIONAL,
...
}
4250
4251
4252
4253
4254
4255
4256
4257
4258
4259
4260
4261
4262
4263
4264
4265
4266
4267
4268
4269
4270
4271
4272
4273
/**
* This DF indicates the opening/closure status of a lane or a set of lanes.
*
* It includes the following components:
*
* @field innerhardShoulderStatus: this information is optional and shall be included if the information is known.
* It indicates the open/closing status of inner hard shoulder lanes.
*
* @field outerhardShoulderStatus: this information is optional and shall be included if the information is known.
* It indicates the open/closing status of outer hard shoulder lanes.
*
* @field drivingLaneStatus: this information is optional and shall be included if the information is known.
* It indicates the open/closing status of driving lanes.
* For roads with more than 13 driving lanes, the drivingLaneStatus DE shall not be set.
*
* @category: GeoReference information, Road topology information
* @revision: V1.3.1
*/
ClosedLanes ::= SEQUENCE {
innerhardShoulderStatus HardShoulderStatus OPTIONAL,
outerhardShoulderStatus HardShoulderStatus OPTIONAL,
drivingLaneStatus DrivingLaneStatus OPTIONAL,
...
}
/**
* This DF provides information about the breakup of a cluster.
*
* It includes the following components:
*
* @field clusterBreakupReason: indicates the reason for breakup.
*
* @field breakupTime: indicates the time of breakup.
*
* @category: Cluster Information
* @revision: Created in V2.1.1
*/
ClusterBreakupInfo ::= SEQUENCE {
clusterBreakupReason ClusterBreakupReason,
breakupTime DeltaTimeQuarterSecond,
...
}
/**
* This DF provides information about the joining of a cluster.
*
* It includes the following components:
*
* @field clusterId: indicates the identifier of the cluster.
*
* @field joinTime: indicates the time of joining.
*
* @category: Cluster Information
* @revision: Created in V2.1.1
*/
ClusterJoinInfo ::= SEQUENCE {
clusterId ClusterId,
joinTime DeltaTimeQuarterSecond,
...
}
/**
* The DF provides information about the leaving of a cluster.
*
* It includes the following components:
*
* @field clusterId: indicates the cluster.
*
* @field clusterLeaveReason: indicates the reason for leaving.
*
* @category: Cluster Information
* @revision: Created in V2.1.1
*/
ClusterLeaveInfo ::= SEQUENCE {
clusterId ClusterId,
clusterLeaveReason ClusterLeaveReason,
4329
4330
4331
4332
4333
4334
4335
4336
4337
4338
4339
4340
4341
4342
4343
4344
4345
4346
4347
4348
4349
4350
4351
4352
4353
4354
4355
4356
/**
* This DF represents the column of the lower triangular positive semi-definite matrix and consists of a list of correlation row values.
* Given a matrix "A" of size n x n, the number of columns to be included in the lower triangular matrix is k=n-1.
* Each column "i" of the lower triangular then contains k-(i-1) values, where "i" refers to the column number count
* starting at 1 from the left.
*
* @category: Sensing Information
* @revision: Created in V2.1.1
*/
CorrelationColumn ::= SEQUENCE SIZE (1..21) OF CorrelationRowValue
/**
* This DF represents the curvature of the vehicle trajectory and the accuracy.
* The curvature detected by a vehicle represents the curvature of actual vehicle trajectory.
*
* It includes the following components:
*
* @field curvatureValue: Detected curvature of the vehicle trajectory.
*
* @field curvatureConfidence: Accuracy of the reported curvature value with a predefined confidence level.
*
* @category: Vehicle information
* @revision: V1.3.1
*/
Curvature ::= SEQUENCE {
curvatureValue CurvatureValue,
curvatureConfidence CurvatureConfidence
}
4358
4359
4360
4361
4362
4363
4364
4365
4366
4367
4368
4369
4370
4371
4372
4373
4374
4375
4376
4377
4378
4379
4380
4381
4382
4383
4384
4385
4386
4387
4388
4389
4390
4391
4392
4393
4394
4395
4396
4397
4398
4399
/**
* This DF provides a description of dangerous goods being carried by a heavy vehicle.
*
* It includes the following components:
*
* @field dangerousGoodsType: Type of dangerous goods.
*
* @field unNumber: a 4-digit number that identifies the substance of the dangerous goods as specified in
* United Nations Recommendations on the Transport of Dangerous Goods - Model Regulations [i.5],
*
* @field elevatedTemperature: whether the carried dangerous goods are transported at high temperature.
* If yes, the value shall be set to TRUE,
*
* @field tunnelsRestricted: whether the heavy vehicle carrying dangerous goods is restricted to enter tunnels.
* If yes, the value shall be set to TRUE,
*
* @field limitedQuantity: whether the carried dangerous goods are packed with limited quantity.
* If yes, the value shall be set to TRUE,
*
* @field emergencyActionCode: physical signage placard at the vehicle that carries information on how an emergency
* service should deal with an incident. This component is optional; it shall be present if the information is available,
*
* @field phoneNumber: contact phone number of assistance service in case of incident or accident.
* This component is optional, it shall be present if the information is available.
*
* @field companyName: name of company that manages the transportation of the dangerous goods.
* This component is optional; it shall be present if the information is available.
*
* @category Vehicle information
* @revision: V1.3.1
*/
DangerousGoodsExtended ::= SEQUENCE {
dangerousGoodsType DangerousGoodsBasic,
unNumber INTEGER (0..9999),
elevatedTemperature BOOLEAN,
tunnelsRestricted BOOLEAN,
limitedQuantity BOOLEAN,
emergencyActionCode IA5String (SIZE (1..24)) OPTIONAL,
phoneNumber PhoneNumber OPTIONAL,
companyName UTF8String (SIZE (1..24)) OPTIONAL,
...
}
/**
* This DF defines a geographical point position as a 3 dimensional offset position to a reference geographical point.
*
* It includes the following components:
*
* @field deltaLatitude: A delta latitude offset with regards to the latitude value of the reference position.
*
* @field deltaLongitude: A delta longitude offset with regards to the longitude value of the reference position.
*
* @field deltaAltitude: A delta altitude offset with regards to the altitude value of the reference position.
*
* @category: GeoReference information
* @revision: V1.3.1
*/
DeltaReferencePosition ::= SEQUENCE {
deltaLatitude DeltaLatitude,
deltaLongitude DeltaLongitude,
deltaAltitude DeltaAltitude
}
4421
4422
4423
4424
4425
4426
4427
4428
4429
4430
4431
4432
4433
4434
4435
4436
4437
4438
4439
4440
4441
4442
4443
4444
4445
4446
4447
4448
4449
4450
4451
4452
4453
4454
4455
/**
* This DF represents a portion of digital map, described using a list of waypoints @ref ReferencePosition.
*
* @category: GeoReference information
* @revision: V1.3.1
*/
DigitalMap ::= SEQUENCE (SIZE(1..256)) OF ReferencePosition
/**
*
* This DF represents the shape of an elliptical area or right elliptical cylinder that is centred on a reference position which is defined outside of the context of this DF.
*
* It includes the following components:
*
* @field centerPoint: optional offset point which the ellipse is centred on with respect to the reference position.
*
* @field semiMajorAxisLength: half length of the major axis of the ellipse.
*
* @field semiMinorAxisLength: half length of the minor axis of the ellipse.
*
* @field orientation: the optional orientation of the major axis of the ellipse in the WGS84 coordinate system.
*
* @field height: the optional height, present if the shape is a right elliptical cylinder extending in the positive z-axis.
*
* @category: GeoReference information
* @revision: Created in V2.1.1
*/
EllipticalShape ::= SEQUENCE {
centerPoint CartesianPosition3d OPTIONAL,
semiMajorAxisLength StandardLength12b,
semiMinorAxisLength StandardLength12b,
orientation Wgs84AngleValue OPTIONAL,
height StandardLength12b OPTIONAL,
...
4458
4459
4460
4461
4462
4463
4464
4465
4466
4467
4468
4469
4470
4471
4472
4473
4474
4475
4476
4477
4478
4479
4480
4481
4482
4483
4484
4485
4486
4487
4488
4489
4490
4491
4492
4493
4494
4495
4496
4497
4498
4499
4500
4501
4502
4503
4504
4505
4506
4507
4508
4509
4510
4511
/**
*
* This DF represents a vehicle category according to the UNECE/TRANS/WP.29/78/Rev.4 [i.18].
* The following options are available:
*
* @field euVehicleCategoryL: indicates a vehicle in the L category.
*
* @field euVehicleCategoryM: indicates a vehicle in the M category.
*
* @field euVehicleCategoryN: indicates a vehicle in the N category.
*
* @field euVehicleCategoryO: indicates a vehicle in the O category.
*
* @field euVehicleCategoryT: indicates a vehicle in the T category.
*
* @field euVehicleCategoryG: indicates a vehicle in the G category.
*
* @category: Vehicle information
* @revision: Created in V2.1.1
*/
EuVehicleCategoryCode ::= CHOICE {
euVehicleCategoryL EuVehicleCategoryL,
euVehicleCategoryM EuVehicleCategoryM,
euVehicleCategoryN EuVehicleCategoryN,
euVehicleCategoryO EuVehicleCategoryO,
euVehicleCategoryT NULL,
euVehicleCategoryG NULL
}
/**
* The DF consists of a list of @ref EventPoint, where all @ref EventPoint either contain the COMPONENT eventDeltaTime
* or do not contain the COMPONENT eventDeltaTime.
*
* The eventPosition of each @ref EventPoint is defined with respect to the previous @ref EventPoint in the list.
* Except for the first @ref EventPoint which is defined with respect to a position outside of the context of this DF.
*
* @category: GeoReference information, Traffic information
* @revision: created in V2.1.1 based on EventHistory
*/
EventZone::= EventHistory
((WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime PRESENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime ABSENT})))
/**
* The DF consists of a list of @ref EventPoint.
*
* The eventPosition of each @ref EventPoint is defined with respect to the previous @ref EventPoint in the list.
* Except for the first @ref EventPoint which is defined with respect to a position outside of the context of this DF.
*
* @category: GeoReference information, Traffic information
* @note: this DF is kept for backwards compatibility reasons only. It is reccomended to use the @ref EventZone instead.
* @revision: Generalized the semantics in V2.1.1
*/
EventHistory::= SEQUENCE (SIZE(1..23)) OF EventPoint
/**
* This DF provides information related to an event at a defined position.
*
* It includes the following components:
*
* @field eventPosition: offset position of a detected event point to a defined position.
*
* @field eventDeltaTime: optional time travelled by the detecting ITS-S since the previous detected event point.
*
* @field informationQuality: Information quality of the detection for this event point.
*
* @category: GeoReference information, Traffic information
* @revision: generalized the semantics in V2.1.1
*/
EventPoint ::= SEQUENCE {
eventPosition DeltaReferencePosition,
eventDeltaTime PathDeltaTime OPTIONAL,
informationQuality InformationQuality
}
/**
* This DF represents the status of the exterior light switches of a traffic participant.
*
* It includes the following components:
*
* @field vehicular: represents the status of the exterior light switches of a road vehicle.
*
* @field vruSpecific: represents the status of the exterior light switches of a VRU.
*
* @category: VRU information
* @revision: created in V2.1.1
*/
ExteriorLightsExtended ::= SEQUENCE {
vehicular ExteriorLights,
vruSpecific VruSpecificExteriorLights,
...
}
4553
4554
4555
4556
4557
4558
4559
4560
4561
4562
4563
4564
4565
4566
4567
4568
4569
4570
4571
4572
4573
4574
4575
4576
4577
4578
4579
4580
4581
4582
4583
4584
4585
4586
4587
4588
4589
4590
4591
4592
4593
4594
/**
* This DF indicates a transversal position in relation to the different lanes of the road.
* It is an extension of DE_LanePosition to cover locations (sidewalks, bicycle paths), where V-ITS-S would normally not be present.
*
* The following options are available:
*
* @field trafficLanePosition: a position on a traffic lane.
*
* @field nonTrafficLanePosition: a position on a lane which is not a traffic lane.
*
* @field trafficIslandPosition: a position on a traffic island
*
* @field mapPosition: a position on a lane identified in a MAPEM.
*
* @category: Road Topology information
* @revision: created in V2.1.1
*/
GeneralizedLanePosition::= CHOICE {
trafficLanePosition LanePosition,
nonTrafficLanePosition LanePositionAndType,
trafficIslandPosition TrafficIslandPosition,
mapPosition MapPosition,
...
}
/**
* This DF represents the Heading in a WGS84 co-ordinates system.
*
* It includes the following components:
*
* @field headingValue: the heading value.
*
* @field headingConfidence: the accuracy of the reported heading value with a predefined confidence level.
*
* @note: this DF is kept for backwards compatibility reasons only. It is reccomended to use the @ref Wgs84Angle instead.
* @category: Kinematics Information
* @revision: V1.3.1
*/
Heading ::= SEQUENCE {
headingValue HeadingValue,
headingConfidence HeadingConfidence
}
/**
* This DF provides information associated to heading change indicators such as a change of direction.
*
* It includes the following components:
*
* @field direction: the direction of heading change value.
*
* @field actionDeltaTime: the period over which a direction change action is performed.
*
* @category: Kinematics Information
* @revision: created in V2.1.1
*/
HeadingChangeIndication ::= SEQUENCE {
direction TurningDirection,
actionDeltaTime DeltaTimeTenthOfSecond,
...
4615
4616
4617
4618
4619
4620
4621
4622
4623
4624
4625
4626
4627
4628
4629
4630
4631
4632
4633
4634
4635
4636
/**
* This DF represents a frequency channel
*
* It includes the following components:
*
* @field centreFrequency: the centre frequency of the channel
* @unit: 10exp+2 Hz (where exp is exponent)
*
* @field channelWidth: width of the channel
* @unit: 10exp Hz (where exp is exponent)
*
* @field exponent of the power of 10
* @unit: N/A
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementChannel ::= SEQUENCE {
centreFrequency INTEGER (1 .. 99999),
channelWidth INTEGER (0 .. 9999),
exponent INTEGER (0 .. 15)
}
/**
*
* This DF represents a zone inside which the ITS communication should be restricted in order to manage interference.
*
* It includes the following components:
*
* @field zoneDefinition: contains the geographical definition of the zone.
*
* @field managementInfo: contains interference management information applicable in the zone defined in the component zoneDefinition.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementZone ::= SEQUENCE {
zoneDefinition InterferenceManagementZoneDefinition,
managementInfo InterferenceManagementInfo
}
4656
4657
4658
4659
4660
4661
4662
4663
4664
4665
4666
4667
4668
4669
4670
4671
4672
4673
4674
4675
4676
4677
4678
4679
4680
4681
/**
* This DF represents the geographical definition of the zone where band sharing occurs.
*
* It includes the following components:
*
* @field interferenceManagementZoneLatitude: Latitude of the centre point of the interference management zone.
*
* @field interferenceManagementZoneLongitude: Longitude of the centre point of the interference management zone.
*
* @field interferenceManagementZoneRadius: optional radius of the interference management zone in metres.
*
* @field interferenceManagementZoneID: optional identification of the interference management zone.
*
* @field interferenceManagementZoneShape: shape of the interference management zone.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementZoneDefinition::= SEQUENCE{
interferenceManagementZoneLatitude Latitude,
interferenceManagementZoneLongitude Longitude,
interferenceManagementZoneRadius ProtectedZoneRadius OPTIONAL,
interferenceManagementZoneID ProtectedZoneID OPTIONAL,
interferenceManagementZoneShape Shape (WITH COMPONENTS{..., radial ABSENT, radialShapes ABSENT}) OPTIONAL,
...
}
4683
4684
4685
4686
4687
4688
4689
4690
4691
4692
4693
4694
4695
4696
4697
4698
4699
4700
4701
4702
4703
4704
4705
4706
4707
4708
4709
4710
4711
4712
4713
4714
4715
/**
* This DF consists of a list of up to 16 definitions containing interference management information, per affected frequency channels.
*
* @category: Communication information.
* @revision: created in V2.1.1
*/
InterferenceManagementInfo::= SEQUENCE (SIZE(1..16,...)) OF InterferenceManagementInfoPerChannel
/**
* This DF contains interference management information for one affected frequency channel.
*
* It includes the following components:
*
* @field interferenceManagementChannel: frequency channel for which the zone should be applied interference management
*
* @field interferenceManagementZoneType: type of the interference management zone.
*
* @field interferenceManagementMitigationType: optional type of the mitigation to be used in the interference management zone.
*
* @field expiryTime: optional time at which the validity of the interference management communication zone will expire.
* This component is present when the interference management is temporarily valid
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementInfoPerChannel ::= SEQUENCE {
interferenceManagementChannel InterferenceManagementChannel,
interferenceManagementZoneType InterferenceManagementZoneType,
interferenceManagementMitigationType InterferenceManagementMitigationType OPTIONAL,
expiryTime TimestampIts OPTIONAL,
...
}
/**
* This DF provides information and commands defining the required mitigation type in the defined interference management zone.
*
* It includes the following options:
*
* @field unavailable: this is the default choice to be used when information is not available
*
* @field mitigationForTechnologies: it indicates the type of mitigation and the parameters to be used to protect the
* potential victim in the interference management zone per channel access technology class.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementMitigationType ::= CHOICE {
unavailable NULL,
mitigationForTechnologies MitigationForTechnologies
4735
4736
4737
4738
4739
4740
4741
4742
4743
4744
4745
4746
4747
4748
4749
4750
4751
4752
4753
4754
4755
4756
4757
4758
4759
4760
4761
4762
/**
* This DF consist of a list of up to 16 interference management zones.
*
* **EXAMPLE**: An interference management communication zone may be defined around a CEN DSRC road side equipment or an urban rail operational area.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementZones ::= SEQUENCE (SIZE(1..16), ...) OF InterferenceManagementZone
/**
* This DF represents a unique id for an intersection, in accordance with ETSI TS 103 301 [i.17].
*
* It includes the following components:
*
* @field region: the optional identifier of the entity that is responsible for the region in which the intersection is placed.
* It is the duty of that entity to guarantee that the @ref Id is unique within the region.
*
* @field id: the identifier of the intersection
*
* @note: when the RoadRegulatorID is present, the IntersectionReferenceID is guaranteed to be globally unique.
* @category: Road topology information
* @revision: created in V2.1.1
*/
IntersectionReferenceId ::= SEQUENCE {
region Identifier2B OPTIONAL,
id Identifier2B
}
4764
4765
4766
4767
4768
4769
4770
4771
4772
4773
4774
4775
4776
4777
4778
4779
4780
4781
4782
4783
4784
4785
4786
4787
4788
4789
4790
/**
* This DF consists of a list of waypoints @ref ReferencePosition.
*
* @category: GeoReference information
* @revision: Editorial update in V2.1.1
*/
ItineraryPath ::= SEQUENCE SIZE(1..40) OF ReferencePosition
/**
* This DF represents a common message header for application and facilities layer messages.
* It is included at the beginning of an ITS message as the message header.
*
* It includes the following components:
*
* @field protocolVersion: version of the ITS message.
*
* @field messageId: type of the ITS message.
*
* @field stationId: the identifier of the ITS-S that generates the ITS message in question.
*
* @category: Communication information
* @revision: update in V2.1.1: messageID and stationID changed to messageId and stationId; messageId is of type MessageId.
*/
ItsPduHeader ::= SEQUENCE {
protocolVersion INTEGER (0..255),
messageId MessageId,
stationId StationID
/**
* This DF indicates a transversal position in resolution of lanes and the associated lane type.
*
* It includes the following components:
*
* @field transversalPosition: the transversal position.
*
* @field laneType: the type of the lane identified in the component transversalPosition.
*
* @category GeoReference information
* @revision: Created in V2.1.1
*/
LanePositionAndType::= SEQUENCE {
transversalPosition LanePosition,
laneType LaneType,
...
}
/**
* This DF indicates the vehicle acceleration at lateral direction and the accuracy of the lateral acceleration.
*
* It includes the following components:
*
* @field lateralAccelerationValue: lateral acceleration value at a point in time.
*
* @field lateralAccelerationConfidence: accuracy of the reported lateral acceleration value.
*
* @note: this DF is kept forbackwards compatibility reasons only. It is recommended to use @ref Acceleration1d instead.
* @category Vehicle information
* @revision: V1.3.1
*/
LateralAcceleration ::= SEQUENCE {
lateralAccelerationValue LateralAccelerationValue,
lateralAccelerationConfidence AccelerationConfidence
}
/**
* This DF indicates the vehicle acceleration at longitudinal direction and the accuracy of the longitudinal acceleration.
*
* It includes the following components:
*
* @field longitudinalAccelerationValue: longitudinal acceleration value at a point in time.
* @field longitudinalAccelerationConfidence: accuracy of the reported longitudinal acceleration value with a predefined
*
* @note: this DF is kept forbackwards compatibility reasons only. It is recommended to use @ref Acceleration1d instead.
* @category: Vehicle information
* @revision: V1.3.1
*/
LongitudinalAcceleration ::= SEQUENCE {
longitudinalAccelerationValue LongitudinalAccelerationValue,
longitudinalAccelerationConfidence AccelerationConfidence
}
/**
* This DF represents the estimated position along the longitudinal length of a particular lane.
*
* It includes the following components:
*
* @field longitudinalLanePositionValue: the mean value of the longitudinal position within a particular length.
*
* @field longitudinalLanePositionConfidence: The confidence associated to the provided value.
*
* @category: Road topology information
* @revision: created in V2.1.1
*/
LongitudinalLanePosition ::= SEQUENCE {
longitudinalLanePositionValue LongitudinalLanePositionValue,
longitudinalLanePositionConfidence LongitudinalLanePositionConfidence
}
4864
4865
4866
4867
4868
4869
4870
4871
4872
4873
4874
4875
4876
4877
4878
4879
4880
4881
4882
4883
4884
4885
4886
4887
4888
4889
4890
4891
4892
4893
/**
* This DF represents the elements of a lower triangular positive semi-definite matrix, not including the main diagonal elements of the matrix.
* Given a matrix "A" of size n x n, the number of columns @ref CorrelationColumn to be included in the lower triangular matrix is k=n-1.
*
* @category: Vehicle information
* @revision: V1.3.1
*/
LowerTriangularPositiveSemidefiniteMatrix ::= SEQUENCE SIZE (1..21) OF CorrelationColumn
/**
* This DF indicates a position on a topology description transmitted in a MAPEM according to ETSI TS 103 301 [i.17].
*
* It includes the following components:
*
* @field mapReference: optionally identifies the MAPEM carrying the topology.
* It is absent if the MAPEM topology is known from the context.
*
* @field laneId: identifies the lane in the topology.
*
* @field longitudinalLanePosition: optionally indicates the longitudinal offset of the map-matched position of the object along the lane.
*
* @category: Road topology information
* @revision: Created in V2.1.1
*/
MapPosition ::= SEQUENCE {
mapReference MapReference OPTIONAL,
laneId Identifier1B,
longitudinalLanePosition LongitudinalLanePosition OPTIONAL,
...
}
4895
4896
4897
4898
4899
4900
4901
4902
4903
4904
4905
4906
4907
4908
4909
4910
4911
4912
4913
4914
4915
4916
4917
4918
4919
4920
4921
4922
4923
4924
4925
4926
4927
4928
4929
4930
4931
4932
4933
4934
4935
4936
4937
4938
4939
4940
4941
4942
4943
4944
4945
4946
4947
4948
4949
4950
4951
4952
4953
4954
4955
4956
4957
4958
4959
4960
4961
4962
4963
4964
4965
4966
4967
/**
* This DF provides the reference to the information contained in a MAPEM according to ETSI TS 103 301 [i.17].
*
* The following options are provided:
*
* @field roadsegment: option that identifies the description of a road segment contained in a MAPEM.
*
* @field intersection: option that identifies the description of an intersection contained in a MAPEM.
*
* @category: Road topology information
* @revision: Created in V2.1.1
*/
MapReference::= CHOICE {
roadsegment RoadSegmentReferenceId,
intersection IntersectionReferenceId
}
/**
* This DF provides information about a message with respect to the segmentation process at the sender.
*
* It includes the following components:
*
* @field totalMsgSegments: indicates the total number of messages that has been used on the transmitter side to encode the information.
*
* @field thisSegmentNum: indicates the position of the message within of the total set of messages .
*/
MessageSegmentInfo ::= SEQUENCE {
totalMsgSegments CardinalNumber1B,
thisSegmentNum OrdinalNumber1B
}
/**
*
* This DF represents a list of @ref MitigationPerTechnologyClass.
* @category: Communication information
* @revision: Created in V2.1.1
*/
MitigationForTechnologies ::= SEQUENCE (SIZE(1..8)) OF MitigationPerTechnologyClass
/**
* This DF represents a set of mitigation parameters for a specific technology, as specified in ETSI TS 103 724 [i.24], clause 7.
*
* It includes the following components:
*
* @field accessTechnologyClass: channel access technology to which this mitigation is applied.
*
* @field lowDutyCycle: duty cycle limit.
* @unit: 0.01% steps
*
* @field powerReduction: the delta value of power to be reduced.
* @unit: dB
*
* @field dmcToffLimit: idle time limit as defined in ETSI TS 103 175 [i.25].
* @unit: ms
*
* @field dmcTonLimit: Transmission duration limit, as defined in ETSI EN 302 571 [i.26].
* @unit: ms
*
* @note: All parameters are optional, as they may not apply to some of the technologies or
* interference management zone types. Specification details are in ETSI TS 103 724 [i.24], clause 7.
*
* @category: Communication information
* @revision: Created in V2.1.1
*/
MitigationPerTechnologyClass ::= SEQUENCE {
accessTechnologyClass AccessTechnologyClass,
lowDutyCycle INTEGER (0 .. 10000) OPTIONAL,
powerReduction INTEGER (0 .. 30) OPTIONAL,
dmcToffLimit INTEGER (0 .. 1200) OPTIONAL,
dmcTonLimit INTEGER (0 .. 20) OPTIONAL,
...
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
4988
4989
4990
4991
4992
/**
* This DF indicates both the class and associated subclass that best describes an object.
*
* The following options are available:
*
* @field vehicleSubClass: the object is a road vehicle.
*
* @field vruSubClass: the object is a VRU.
*
* @field groupSubClass: the object is a VRU group or cluster.
*
* @field otherSubClass: the object is of a different types as the above.
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
ObjectClass ::= CHOICE {
vehicleSubClass VehicleSubClass,
vruSubClass VruProfileAndSubprofile,
groupSubClass VruClusterInformation (WITH COMPONENTS{..., clusterBoundingBoxShape ABSENT}),
otherSubClass OtherSubClass,
...
}