Newer
Older
**Revision:** _Created in V2.1.1, description revised in V2.2.1_
totalMsgNo CardinalNumber3b,
thisMsgNo OrdinalNumber3b
### <a name="MetaInformation"></a>MetaInformation
This DF provides information about the source of and confidence in information.
It shall include the following components:
* _usedDetectionInformation_ of type [**SensorTypes**](#SensorTypes) <br>
the type of sensor(s) that is used to provide the detection information.
* _usedStoredInformation_ of type [**StoredInformationType**](#StoredInformationType) <br>
* _confidenceValue_ of type [**ConfidenceLevel**](#ConfidenceLevel) OPTIONAL<br>
an optional confidence value associated to the information.
**Categories:** Basic information
**Revision:** _Created in V2.2.1_
```asn1
MetaInformation::=SEQUENCE{
usedDetectionInformation SensorTypes,
usedStoredInformation StoredInformationType,
confidenceValue ConfidenceLevel OPTIONAL,
...
}
```
### <a name="MitigationForTechnologies"></a>MitigationForTechnologies
This DF shall contain a list of [**MitigationPerTechnologyClass**](#MitigationPerTechnologyClass).
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
```asn1
MitigationForTechnologies ::= SEQUENCE (SIZE(1..8)) OF MitigationPerTechnologyClass
```
### <a name="MitigationPerTechnologyClass"></a>MitigationPerTechnologyClass
This DF represents a set of mitigation parameters for a specific technology, as specified in ETSI TS 103 724 [[24]](#references), clause 7.
* _accessTechnologyClass_ of type [**AccessTechnologyClass**](#AccessTechnologyClass) <br>
channel access technology to which this mitigation is intended to be applied.
* _lowDutyCycle_ of type **INTEGER** (0 .. 10000) OPTIONAL<br>
* _powerReduction_ of type **INTEGER** (0 .. 30) OPTIONAL<br>
* _dmcToffLimit_ of type **INTEGER** (0 .. 1200) OPTIONAL<br>
idle time limit as defined in ETSI TS 103 175 [[19]](#references).
* _dmcTonLimit_ of type **INTEGER** (0 .. 20) OPTIONAL<br>
Transmission duration limit, as defined in ETSI EN 302 571 [[20]](#references).
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
NOTE: All parameters are optional, as they may not apply to some of the technologies or
interference management zone types. Specification details are in ETSI TS 103 724 [[24]](#references), clause 7.
```asn1
MitigationPerTechnologyClass ::= SEQUENCE {
accessTechnologyClass AccessTechnologyClass,
lowDutyCycle INTEGER (0 .. 10000) OPTIONAL,
powerReduction INTEGER (0 .. 30) OPTIONAL,
dmcToffLimit INTEGER (0 .. 1200) OPTIONAL,
dmcTonLimit INTEGER (0 .. 20) OPTIONAL,
...
}
```
### <a name="ObjectClass"></a>ObjectClass
This DF indicates both the class and associated subclass that best describes an object.
* _vehicleSubClass_ of type [**TrafficParticipantType**](#TrafficParticipantType) (unknown|passengerCar..tram|agricultural)<br>
the object is a road vehicle and the specific subclass is specified.
* _vruSubClass_ of type [**VruProfileAndSubprofile**](#VruProfileAndSubprofile) <br>
the object is a VRU and the specific subclass is specified.
* _groupSubClass_ of type [**VruClusterInformation**](#VruClusterInformation) <br>
the object is a VRU group or cluster and the cluster information is specified.
* _otherSubClass_ of type [**OtherSubClass**](#OtherSubClass) <br>
the object is of a different type than the above and the specific subclass is specified.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
vehicleSubClass TrafficParticipantType (unknown|passengerCar..tram|agricultural),
vruSubClass VruProfileAndSubprofile,
groupSubClass VruClusterInformation
(WITH COMPONENTS{..., clusterBoundingBoxShape ABSENT}),
...
}
```
### <a name="ObjectClassDescription"></a>ObjectClassDescription
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
ObjectClassDescription ::= SEQUENCE (SIZE(1..8)) OF ObjectClassWithConfidence
```
### <a name="ObjectClassWithConfidence"></a>ObjectClassWithConfidence
This DF represents the classification of a detected object together with a confidence level.
* _objectClass_ of type [**ObjectClass**](#ObjectClass) <br>
* _confidence_ of type [**ConfidenceLevel**](#ConfidenceLevel) <br>
* Confidence<br>
the associated confidence level.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
ObjectClassWithConfidence ::= SEQUENCE {
objectClass ObjectClass,
confidence ConfidenceLevel
}
```
### <a name="ObjectDimension"></a>ObjectDimension
This DF represents a dimension of an object together with a confidence value.
* _value_ of type [**ObjectDimensionValue**](#ObjectDimensionValue) <br>
the object dimension value which can be estimated as the mean of the current distribution.
* _confidence_ of type [**ObjectDimensionConfidence**](#ObjectDimensionConfidence) <br>
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
ObjectDimension ::= SEQUENCE {
value ObjectDimensionValue,
### <a name="OccupiedLanesWithConfidence"></a>OccupiedLanesWithConfidence
This DF represents a set of lanes which are partially or fully occupied by an object or event at an externally defined reference position.
8179
8180
8181
8182
8183
8184
8185
8186
8187
8188
8189
8190
8191
8192
8193
8194
8195
8196
8197
8198
8199
8200
8201
8202
8203
8204
8205
8206
8207
8208
8209
8210
8211
8212
8213
8214
8215
8216
8217
8218
It shall include the following components:
* _lanePositionBased_ of type **SEQUENCE** (SIZE(1..4)) OF LanePositionOptions<br>
a set of up to `4` lanes that are partially or fully occupied by an object or event, ordered by increasing value of [**LanePosition**](#LanePosition).
Lanes that are partially occupied can be described using the component lanePositionWithLateralDetails of [**Options**](#Options), with the following constraints:
The distance to lane borders which are covered by the object / event shall be set to 0. Only the distances to the leftmost and/or rightmost border which are not covered by
the object / event shall be provided with values > 0. Those values shall be added to the respective instances of [**LanePositionOptions**](#LanePositionOptions), i.e. the first entry shall contain the component distanceToLeftBorder > 0 ,
and/or the last entry shall contain the component distanceToRightBorder > 0; the respective other components of these entries shall be set to 0.
* _mapBased_ of type **SEQUENCE** (SIZE(1..4)) OF MapPosition OPTIONAL<br>
optional lane information described in the context of a MAPEM as specified in ETSI TS 103 301 [[15]](#references).
If present, it shall describe the same lane(s) as listed in the component lanePositionBased, but using the lane identification of the MAPEM. This component can be used only if a
MAPEM is available for the reference position (e.g. on an intersection): In this case it is used as a synonym to the mandatory component lanePositionBased.
* _confidence_ of type [**MetaInformation**](#MetaInformation) <br>
mandatory confidence information for expressing the probability that all the provided lanes are occupied. It also provides information on how the lane
information were generated. If none of the sensors were used, the lane information is assumed to be derived directly from the absolute reference position and the related dimension.
**Categories:** Road Topology information
**Revision:** _Created in V2.2.1_
>>>
NOTE: In contrast to [**GeneralizedLanePosition**](#GeneralizedLanePosition), the dimension of the object or event area (width and length) is taken into account to determine the occupancy,
i.e. this DF describes the lanes which are blocked by an object or event and not the position of the object / event itself. A confidence is used to describe the
probability that exactly all the provided lanes are occupied.
>>>
```asn1
OccupiedLanesWithConfidence::= SEQUENCE {
lanePositionBased SEQUENCE (SIZE(1..4)) OF LanePositionOptions,
mapBased SEQUENCE (SIZE(1..4)) OF MapPosition OPTIONAL,
confidence MetaInformation,
...
}
```
This DF represents a path with a set of path points.
It shall contain up to `40` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories:** GeoReference information Vehicle information
**Revision:** _created in V2.1.1 based on PathHistory_
```asn1
Path::= SEQUENCE (SIZE(0..40)) OF PathPoint
```
### <a name="PathDeltaTimeChoice"></a>PathDeltaTimeChoice
This DF represents estimated/predicted travel time between a position and a predefined reference position.
the following options are available:
* _deltaTimeHighPrecision_ of type [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) <br>
delta time with precision of 0,1 s.
* _deltaTimeBigRange_ of type [**DeltaTimeTenSeconds**](#DeltaTimeTenSeconds) <br>
delta time with precision of 10 s.
**Categories:** Basic information
**Revision:** _Created in V2.2.1_
```asn1
PathDeltaTimeChoice::= CHOICE {
deltaTimeHighPrecision DeltaTimeTenthOfSecond,
8253
8254
8255
8256
8257
8258
8259
8260
8261
8262
8263
8264
8265
8266
8267
8268
8269
8270
8271
8272
8273
8274
8275
8276
8277
8278
}
```
### <a name="PathExtended"></a>PathExtended
This DF represents a path towards a specific point specified in the [**EventZone**](#EventZone).
It shall include the following components:
* _pointOfEventZone_ of type **INTEGER** (1..23)<br>
the ordinal number of the point within the DF EventZone, i.e. within the list of EventPoints.
* _path_ of type [**Path**](#Path) <br>
the associated path towards the point specified in pointOfEventZone.
The first PathPoint presents an offset delta position with regards to the position of that pointOfEventZone.
**Categories:** GeoReference information
**Revision:** _Created in V2.2.1_
```asn1
PathExtended::= SEQUENCE {
pointOfEventZone INTEGER(1..23),
path Path
}
```
This DF represents a path history with a set of path points.
It shall contain up to `40` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories:** GeoReference information Vehicle information
**Revision:** _semantics updated in V2.1.1, size corrected to 0..40 in V2.2.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Path**](#Path) instead.
PathHistory::= SEQUENCE (SIZE(0..40)) OF PathPoint
This DF represents a predicted path or trajectory with a set of predicted points and optional information to generate a shape which is estimated to contain the real path.
It shall contain up to `16` [**PathPointPredicted**](#PathPointPredicted).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1 , size constraint changed to SIZE(1..16, ...) in V2.2.1_
```asn1
PathPredicted::= SEQUENCE (SIZE(1..16,...)) OF PathPointPredicted
```
### <a name="PathPredicted2"></a>PathPredicted2
This DF represents a predicted path, predicted trajectory or predicted path zone together with usage information and a prediction confidence.
It shall include the following components:
* _pathPredicted_ of type [**PathPredicted**](#PathPredicted) <br>
the predicted path (pathDeltaTime ABSENT) or trajectory (pathDeltaTime PRESENT) and/or the path zone (symmetricAreaOffset PRESENT).
* _usageIndication_ of type [**UsageIndication**](#UsageIndication) <br>
an indication of how the predicted path will be used.
* _confidenceLevel_ of type [**ConfidenceLevel**](#ConfidenceLevel) <br>
the confidence that the path/trajectory in pathPredicted will occur as predicted.
**Categories:** GeoReference information
**Revision:** _created in V2.2.1_
pathPredicted PathPredicted
((WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime ABSENT, symmetricAreaOffset ABSENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime PRESENT, symmetricAreaOffset ABSENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime ABSENT, symmetricAreaOffset PRESENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime PRESENT, symmetricAreaOffset PRESENT}))),
usageIndication UsageIndication,
confidenceLevel ConfidenceLevel,
...
}
```
### <a name="PathPredictedList"></a>PathPredictedList
This DF represents one or more predicted paths, or trajectories or path zones (zones that include all possible paths/trajectories within its boundaries) using [**PathPredicted2**](#PathPredicted2).
It shall contain up to `16` [**PathPredicted2**](#PathPredicted2).
**Categories:** GeoReference information
**Revision:** _V2.2.1_
```asn1
PathPredictedList ::= SEQUENCE SIZE(1..16,...) OF PathPredicted2
This DF defines an offset waypoint position within a path.
* _pathPosition_ of type [**DeltaReferencePosition**](#DeltaReferencePosition) <br>
The waypoint position defined as an offset position with regards to a pre-defined reference position.
* _pathDeltaTime_ of type [**PathDeltaTime**](#PathDeltaTime) OPTIONAL<br>
The optional travel time separated from a waypoint to the predefined reference position.
**Categories:** GeoReference information
**Revision:** _semantics updated in V2.1.1_
```asn1
PathPoint ::= SEQUENCE {
pathPosition DeltaReferencePosition,
pathDeltaTime PathDeltaTime OPTIONAL
}
```
### <a name="PathPointPredicted"></a>PathPointPredicted
This DF defines a predicted offset position that can be used within a predicted path or trajectory, together with optional data to describe a path zone shape.
* _deltaLatitude_ of type [**DeltaLatitude**](#DeltaLatitude) <br>
the offset latitude with regards to a pre-defined reference position.
* _deltaLongitude_ of type [**DeltaLongitude**](#DeltaLongitude) <br>
the offset longitude with regards to a pre-defined reference position.
* _horizontalPositionConfidence_ of type [**PosConfidenceEllipse**](#PosConfidenceEllipse) OPTIONAL<br>
the optional confidence value associated to the horizontal geographical position.
* _deltaAltitude_ of type [**DeltaAltitude**](#DeltaAltitude) DEFAULT unavailable<br>
the optional offset altitude with regards to a pre-defined reference position, with default value unavailable.
* _altitudeConfidence_ of type [**AltitudeConfidence**](#AltitudeConfidence) DEFAULT unavailable<br>
the optional confidence value associated to the altitude value of the geographical position, with default value unavailable.
* _pathDeltaTime_ of type [**PathDeltaTimeChoice**](#PathDeltaTimeChoice) OPTIONAL<br>
the optional travel time to the waypoint from the predefined reference position.
* _symmetricAreaOffset_ of type [**StandardLength9b**](#StandardLength9b) OPTIONAL<br>
the optional symmetric offset to generate a shape, see Annex D for details.
* _asymmetricAreaOffset_ of type [**StandardLength9b**](#StandardLength9b) OPTIONAL<br>
the optional asymmetric offset to generate a shape, see Annex D for details.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1, type of pathDeltaTime changed and optionality added, fields symmetricAreaOffset and asymmetricAreaOffset added in V2.2.1_
PathPointPredicted::= SEQUENCE {
deltaLatitude DeltaLatitude,
deltaLongitude DeltaLongitude,
horizontalPositionConfidence PosConfidenceEllipse OPTIONAL,
deltaAltitude DeltaAltitude DEFAULT unavailable,
altitudeConfidence AltitudeConfidence DEFAULT unavailable,
symmetricAreaOffset StandardLength9b OPTIONAL,
asymmetricAreaOffset StandardLength9b OPTIONAL,
((WITH COMPONENTS {..., symmetricAreaOffset ABSENT, asymmetricAreaOffset ABSENT}) |
(WITH COMPONENTS {..., symmetricAreaOffset PRESENT, asymmetricAreaOffset ABSENT}) |
(WITH COMPONENTS {..., symmetricAreaOffset PRESENT, asymmetricAreaOffset PRESENT}))
```
### <a name="PathReferences"></a>PathReferences
This DF represents a list of references to the components of a [**Traces**](#Traces) or [**TracesExtended**](#TracesExtended) DF using the [**PathId**](#PathId).
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
PathReferences ::= SEQUENCE (SIZE(1..14)) OF PathId
```
### <a name="PerceivedObject"></a>PerceivedObject
This DF contains information about a perceived object including its kinematic state and attitude vector in a pre-defined coordinate system and with respect to a reference time.
* _objectId_ of type [**Identifier2B**](#Identifier2B) OPTIONAL<br>
optional identifier assigned to a detected object.
* _measurementDeltaTime_ of type [**DeltaTimeMilliSecondSigned**](#DeltaTimeMilliSecondSigned) <br>
the time difference from a reference time to the time of the measurement of the object.
Negative values indicate that the provided object state refers to a point in time before the reference time.
* _position_ of type [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) <br>
the position of the geometric centre of the object's bounding box within the pre-defined coordinate system.
* _velocity_ of type [**Velocity3dWithConfidence**](#Velocity3dWithConfidence) OPTIONAL<br>
the velocity vector of the object within the pre-defined coordinate system.
* _acceleration_ of type [**Acceleration3dWithConfidence**](#Acceleration3dWithConfidence) OPTIONAL<br>
the acceleration vector of the object within the pre-defined coordinate system.
* _angles_ of type [**EulerAnglesWithConfidence**](#EulerAnglesWithConfidence) OPTIONAL<br>
optional Euler angles of the object bounding box at the time of measurement.
* _zAngularVelocity_ of type [**CartesianAngularVelocityComponent**](#CartesianAngularVelocityComponent) OPTIONAL<br>
optional angular velocity of the object around the z-axis at the time of measurement.
The angular velocity is measured with positive values considering the object orientation turning around the z-axis using the right-hand rule.
* _lowerTriangularCorrelationMatrices_ of type [**LowerTriangularPositiveSemidefiniteMatrices**](#LowerTriangularPositiveSemidefiniteMatrices) OPTIONAL<br>
optional set of lower triangular correlation matrices for selected components of the provided kinematic state and attitude vector.
* _objectDimensionZ_ of type [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional z-dimension of object bounding box.
This dimension shall be measured along the direction of the z-axis after all the rotations have been applied.
* _objectDimensionY_ of type [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional y-dimension of the object bounding box.
This dimension shall be measured along the direction of the y-axis after all the rotations have been applied.
* _objectDimensionX_ of type [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional x-dimension of object bounding box.
This dimension shall be measured along the direction of the x-axis after all the rotations have been applied.
* _objectAge_ of type [**DeltaTimeMilliSecondSigned**](#DeltaTimeMilliSecondSigned) (0..2047) OPTIONAL<br>
optional age of the detected and described object, i.e. the difference in time between the moment
it has been first detected and the reference time of the message. Value `1500` indicates that the object has been observed for more than 1.5s.
* _objectPerceptionQuality_ of type [**ObjectPerceptionQuality**](#ObjectPerceptionQuality) OPTIONAL<br>
* _sensorIdList_ of type [**SequenceOfIdentifier1B**](#SequenceOfIdentifier1B) OPTIONAL<br>
optional list of sensor-IDs which provided the measurement data.
* _classification_ of type [**ObjectClassDescription**](#ObjectClassDescription) OPTIONAL<br>
optional classification of the described object
* _mapPosition_ of type [**MapPosition**](#MapPosition) OPTIONAL<br>
* matchedPosition<br>
optional map-matched position of an object.
**Categories:** Sensing information
**Revision:** _created in V2.1.1_
position CartesianPosition3dWithConfidence,
velocity Velocity3dWithConfidence OPTIONAL,
acceleration Acceleration3dWithConfidence OPTIONAL,
angles EulerAnglesWithConfidence OPTIONAL,
zAngularVelocity CartesianAngularVelocityComponent OPTIONAL,
lowerTriangularCorrelationMatrices LowerTriangularPositiveSemidefiniteMatrices OPTIONAL,
objectDimensionZ ObjectDimension OPTIONAL,
objectDimensionY ObjectDimension OPTIONAL,
objectDimensionX ObjectDimension OPTIONAL,
objectAge DeltaTimeMilliSecondSigned (0..2047) OPTIONAL,
objectPerceptionQuality ObjectPerceptionQuality OPTIONAL,
sensorIdList SequenceOfIdentifier1B OPTIONAL,
classification ObjectClassDescription OPTIONAL,
mapPosition MapPosition OPTIONAL,
...
}
```
### <a name="PolygonalShape"></a>PolygonalShape
This DF represents the shape of a polygonal area or of a right prism.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
the optional reference point used for the definition of the shape, relative to an externally specified reference position.
If this component is absent, the externally specified reference position represents the shape's reference point.
* _polygon_ of type [**SequenceOfCartesianPosition3d**](#SequenceOfCartesianPosition3d) (SIZE(3..16,...))<br>
the polygonal area represented by a list of minimum `3` to maximum `16` [**CartesianPosition3d**](#CartesianPosition3d).
All nodes of the polygon shall be considered relative to the shape's reference point.
* _height_ of type [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
the optional height, present if the shape is a right prism extending in the positive z-axis.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1_
shapeReferencePoint CartesianPosition3d OPTIONAL,
polygon SequenceOfCartesianPosition3d (SIZE(3..16,...)),
height StandardLength12b OPTIONAL
}
```
### <a name="PosConfidenceEllipse"></a>PosConfidenceEllipse
This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a
confidence level of 95 %. The centre of the ellipse shape corresponds to the reference
position point for which the position accuracy is evaluated.
* _semiMajorConfidence_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the major axis, i.e. distance between the centre point
and major axis point of the position accuracy ellipse.
* _semiMinorConfidence_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the minor axis, i.e. distance between the centre point
and minor axis point of the position accuracy ellipse.
* _semiMajorOrientation_ of type [**HeadingValue**](#HeadingValue) <br>
orientation direction of the ellipse major axis of the position accuracy
ellipse with regards to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
**Categories:** GeoReference information
```asn1
PosConfidenceEllipse ::= SEQUENCE {
semiMajorConfidence SemiAxisLength,
semiMinorConfidence SemiAxisLength,
semiMajorOrientation HeadingValue
}
```
### <a name="PositionConfidenceEllipse"></a>PositionConfidenceEllipse
This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a
confidence level of 95 %. The centre of the ellipse shape corresponds to the reference
position point for which the position accuracy is evaluated.
It shall include the following components:
* _semiMajorAxisLength_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the major axis, i.e. distance between the centre point
and major axis point of the position accuracy ellipse.
* _semiMinorAxisLength_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the minor axis, i.e. distance between the centre point
and minor axis point of the position accuracy ellipse.
* _semiMajorAxisOrientation_ of type [**Wgs84AngleValue**](#Wgs84AngleValue) <br>
orientation direction of the ellipse major axis of the position accuracy
ellipse with regards to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1 based on [**PosConfidenceEllipse**](#PosConfidenceEllipse)_
```asn1
PositionConfidenceEllipse ::= SEQUENCE {
semiMajorAxisLength SemiAxisLength,
semiMinorAxisLength SemiAxisLength,
semiMajorAxisOrientation Wgs84AngleValue
}
```
### <a name="PositionOfPillars"></a>PositionOfPillars
This DF shall contain a list of distances [**PosPillar**](#PosPillar) that refer to the perpendicular distance between centre of vehicle front bumper
and vehicle pillar A, between neighbour pillars until the last pillar of the vehicle.
Vehicle pillars refer to the vertical or near vertical support of vehicle,
designated respectively as the A, B, C or D and other pillars moving in side profile view from the front to rear.
The first value of the DF refers to the perpendicular distance from the centre of vehicle front bumper to
vehicle A pillar. The second value refers to the perpendicular distance from the centre position of A pillar
to the B pillar of vehicle and so on until the last pillar.
**Categories:** Vehicle information
```asn1
PositionOfPillars ::= SEQUENCE (SIZE(1..3, ...)) OF PosPillar
```
### <a name="ProtectedCommunicationZone"></a>ProtectedCommunicationZone
This DF describes a zone of protection inside which the ITS communication should be restricted.
* _protectedZoneType_ of type [**ProtectedZoneType**](#ProtectedZoneType) <br>
* _expiryTime_ of type [**TimestampIts**](#TimestampIts) OPTIONAL<br>
optional time at which the validity of the protected communication zone will expire.
* _protectedZoneLatitude_ of type [**Latitude**](#Latitude) <br>
latitude of the centre point of the protected communication zone.
* _protectedZoneLongitude_ of type [**Longitude**](#Longitude) <br>
longitude of the centre point of the protected communication zone.
* _protectedZoneRadius_ of type [**ProtectedZoneRadius**](#ProtectedZoneRadius) OPTIONAL<br>
optional radius of the protected communication zone in metres.
* _protectedZoneId_ of type [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL<br>
the optional ID of the protected communication zone.
**Categories:** Infrastructure information Communication information
**Revision:** _revised in V2.1.1 (changed protectedZoneID to protectedZoneId)_
NOTE: A protected communication zone may be defined around a CEN DSRC road side equipment.
```asn1
ProtectedCommunicationZone ::= SEQUENCE {
protectedZoneType ProtectedZoneType,
expiryTime TimestampIts OPTIONAL,
protectedZoneLatitude Latitude,
protectedZoneLongitude Longitude,
protectedZoneRadius ProtectedZoneRadius OPTIONAL,
...
}
```
### <a name="ProtectedCommunicationZonesRSU"></a>ProtectedCommunicationZonesRSU
This DF shall contain a list of [**ProtectedCommunicationZone**](#ProtectedCommunicationZone) provided by a road side ITS-S (Road Side Unit RSU).
It may provide up to 16 protected communication zones information.
**Categories:** Infrastructure information Communication information
```asn1
ProtectedCommunicationZonesRSU ::= SEQUENCE (SIZE(1..16)) OF ProtectedCommunicationZone
```
8688
8689
8690
8691
8692
8693
8694
8695
8696
8697
8698
8699
8700
8701
8702
8703
8704
8705
8706
8707
8708
8709
8710
8711
8712
8713
8714
### <a name="Provider"></a>Provider
This DF identifies an organization.
It shall include the following components:
* _countryCode_ of type [**CountryCode**](#CountryCode) <br>
represents the country code that identifies the country of the national registration administrator for issuers according to ISO 14816.
* _providerIdentifier_ of type [**IssuerIdentifier**](#IssuerIdentifier) <br>
identifies the organization according to the national ISO 14816 register for issuers.
**Categories:** Communication information
**Revision:** _Created in V2.2.1 based on ISO 17573-3 [[24]](#references)_
>>>
NOTE: See https://www.itsstandards.eu/registries/register-of-nra-i-cs1/ for a list of national registration administrators and their respective registers
>>>
```asn1
Provider ::= SEQUENCE {
countryCode CountryCode,
providerIdentifier IssuerIdentifier
}
```
This DF represents activation data for real-time systems designed for operations control, traffic light priorities, track switches, barriers, etc.
using a range of activation devices equipped in public transport vehicles.
The activation of the corresponding equipment is triggered by the approach or passage of a public transport
vehicle at a certain point (e.g. a beacon).
* _ptActivationType_ of type [**PtActivationType**](#PtActivationType) <br>
* _ptActivationData_ of type [**PtActivationData**](#PtActivationData) <br>
* ptActicationData<br>
data of activation.
Today there are different payload variants defined for public transport activation-data. The R09.x is one of
the industry standard used by public transport vehicles (e.g. buses, trams) in Europe (e.g. Germany Austria)
for controlling traffic lights, barriers, bollards, etc. This DF shall include information like route, course,
The R09.x content is defined in VDV recommendation 420 [[7]](#references). It includes following information:
- Priority Request Information (pre-request, request, ready to start)
- End of Prioritization procedure
- Priority request direction
- Public Transport line number
- Priority of public transport
- Route line identifier of the public transport
- Route number identification
- Destination of public transport vehicle
Other countries may use different message sets defined by the local administration.
**Categories:** Vehicle information
```asn1
PtActivation ::= SEQUENCE {
ptActivationType PtActivationType,
ptActivationData PtActivationData
}
```
### <a name="RadialShape"></a>RadialShape
This DF describes a radial shape. The circular or spherical sector is constructed by sweeping
the provided range about the reference position specified outside of the context of this DF or
about the optional shapeReferencePoint. The range is swept between a horizontal start and a
horizontal end angle in the X-Y plane of a cartesian coordinate system specified outside of the
context of this DF, in a right-hand positive angular direction w.r.t. the x-axis.
A vertical opening angle in the X-Z plane may optionally be provided in a right-hand positive
angular direction w.r.t. the x-axis.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
the optional reference point used for the definition of the shape,
relative to an externally specified reference position. If this component is absent, the
externally specified reference position represents the shape's reference point.
* _range_ of type [**StandardLength12b**](#StandardLength12b) <br>
the radial range of the shape from the shape's reference point.
* _horizontalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
the start of the shape's horizontal opening angle.
* _horizontalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
the end of the shape's horizontal opening angle.
* _verticalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional start of the shape's vertical opening angle.
* _verticalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional end of the shape's vertical opening angle.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1, names and types of the horizontal opening angles changed, constraint added and description revised in V2.2.1_
horizontalOpeningAngleStart CartesianAngleValue,
horizontalOpeningAngleEnd CartesianAngleValue,
verticalOpeningAngleStart CartesianAngleValue OPTIONAL,
verticalOpeningAngleEnd CartesianAngleValue OPTIONAL
((WITH COMPONENTS {..., verticalOpeningAngleStart ABSENT, verticalOpeningAngleEnd ABSENT }) |
(WITH COMPONENTS {..., verticalOpeningAngleStart PRESENT, verticalOpeningAngleEnd PRESENT }))
```
### <a name="RadialShapes"></a>RadialShapes
This DF describes a list of radial shapes positioned w.r.t. to an offset position defined
relative to a reference position specified outside of the context of this DF and oriented w.r.t.
a cartesian coordinate system specified outside of the context of this DF.
* _refPointId_ of type [**Identifier1B**](#Identifier1B) <br>
the identification of the reference point in case of a sensor mounted to trailer. Defaults to ITS ReferencePoint (0).
* _xCoordinate_ of type [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) <br>
* _yCoordinate_ of type [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) <br>
* _zCoordinate_ of type [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) OPTIONAL<br>
* _radialShapesList_ of type [**RadialShapesList**](#RadialShapesList) <br>
**Categories:** Georeference information
**Revision:** _created in V2.1.1, description revised in V2.2.1_
```asn1
RadialShapes ::= SEQUENCE {
refPointId Identifier1B,
xCoordinate CartesianCoordinateSmall,
yCoordinate CartesianCoordinateSmall,
zCoordinate CartesianCoordinateSmall OPTIONAL,
}
```
### <a name="RadialShapesList"></a>RadialShapesList
The DF contains a list of [**RadialShapeDetails**](#RadialShapeDetails).
**Categories:** Georeference information
**Revision:** _created in V2.1.1_
```asn1
RadialShapesList ::= SEQUENCE SIZE(1..16,...) OF RadialShapeDetails
```
### <a name="RadialShapeDetails"></a>RadialShapeDetails
This DF describes radial shape details. The circular sector or cone is
constructed by sweeping the provided range about the position specified outside of the
context of this DF. The range is swept between a horizontal start and a horizontal end angle in
the X-Y plane of a right-hand cartesian coordinate system specified outside of the context of
this DF, in positive angular direction w.r.t. the x-axis. A vertical opening angle in the X-Z
plane may optionally be provided in positive angular direction w.r.t. the x-axis.
* _range_ of type [**StandardLength12b**](#StandardLength12b) <br>
the radial range of the sensor from the reference point or sensor point offset.
* _horizontalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
the start of the shape's horizontal opening angle.
* _horizontalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
* _verticalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional start of the shape's vertical opening angle.
* _verticalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional end of the shape's vertical opening angle.
**Categories:** Georeference information
**Revision:** _created in V2.1.1, description revised and constraint added in V2.2.1_
```asn1
RadialShapeDetails ::= SEQUENCE {
range StandardLength12b,
horizontalOpeningAngleStart CartesianAngleValue,
horizontalOpeningAngleEnd CartesianAngleValue,
verticalOpeningAngleStart CartesianAngleValue OPTIONAL,
verticalOpeningAngleEnd CartesianAngleValue OPTIONAL
((WITH COMPONENTS {..., verticalOpeningAngleStart ABSENT, verticalOpeningAngleEnd ABSENT }) |
(WITH COMPONENTS {..., verticalOpeningAngleStart PRESENT, verticalOpeningAngleEnd PRESENT }))
```
### <a name="RectangularShape"></a>RectangularShape
This DF represents the shape of a rectangular area or a right rectangular prism that is centred
on a reference position defined outside of the context of this DF and oriented w.r.t. a cartesian
coordinate system defined outside of the context of this DF.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
represents an optional offset point which the rectangle is centred on with
respect to the reference position. If this component is absent, the externally specified
reference position represents the shape's reference point.
* _semiLength_ of type [**StandardLength12b**](#StandardLength12b) <br>
represents half the length of the rectangle located in the X-Y Plane.
* _semiBreadth_ of type [**StandardLength12b**](#StandardLength12b) <br>
represents half the breadth of the rectangle located in the X-Y Plane.
* _orientation_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
represents the optional orientation of the length of the rectangle,
measured with positive values turning around the Z-axis using the right-hand rule, starting from
the X-axis.
* _height_ of type [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
represents the optional height, present if the shape is a right rectangular prism
with height extending in the positive Z-axis.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1, centerPoint renamed to shapeReferencePoint, the type of the field orientation changed and description revised in V2.2.1_
shapeReferencePoint CartesianPosition3d OPTIONAL,
semiLength StandardLength12b,
semiBreadth StandardLength12b,
orientation CartesianAngleValue OPTIONAL,
height StandardLength12b OPTIONAL
}
```
### <a name="ReferencePosition"></a>ReferencePosition
A position within a geographic coordinate system together with a confidence ellipse.
* _latitude_ of type [**Latitude**](#Latitude) <br>
* _longitude_ of type [**Longitude**](#Longitude) <br>
* _positionConfidenceEllipse_ of type [**PosConfidenceEllipse**](#PosConfidenceEllipse) <br>
the confidence ellipse associated to the geographical position.
* _altitude_ of type [**Altitude**](#Altitude) <br>
the altitude and an altitude accuracy of the geographical point.
**Categories:** GeoReference information
**Revision:** _description updated in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**ReferencePositionWithConfidence**](#ReferencePositionWithConfidence) instead.
```asn1
ReferencePosition ::= SEQUENCE {
latitude Latitude,
longitude Longitude,
positionConfidenceEllipse PosConfidenceEllipse,
altitude Altitude
}
```
### <a name="ReferencePositionWithConfidence"></a>ReferencePositionWithConfidence
A position within a geographic coordinate system together with a confidence ellipse.
It shall include the following components:
* _latitude_ of type [**Latitude**](#Latitude) <br>
* _longitude_ of type [**Longitude**](#Longitude) <br>
* _positionConfidenceEllipse_ of type [**PositionConfidenceEllipse**](#PositionConfidenceEllipse) <br>
the confidence ellipse associated to the geographical position.
* _altitude_ of type [**Altitude**](#Altitude) <br>
the altitude and an altitude accuracy of the geographical point.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1 based on [**ReferencePosition**](#ReferencePosition) but using [**PositionConfidenceEllipse**](#PositionConfidenceEllipse)._
```asn1
ReferencePositionWithConfidence ::= SEQUENCE {
latitude Latitude,
longitude Longitude,
positionConfidenceEllipse PositionConfidenceEllipse,
altitude Altitude
}
```
This DF shall contain a list of [**StationType**](#StationType). to which a certain traffic restriction, e.g. the speed limit, applies.
**Categories:** Infrastructure information Traffic information