Newer
Older
**Categories:** Vehicle information
**Revision:** _Editorial update in V2.1.1_
```asn1
PerformanceClass ::= INTEGER {
unavailable (0),
performanceClassA (1),
performanceClassB (2)
} (0..7)
```
### <a name="PhoneNumber"></a>PhoneNumber
**Categories:** Basic information
```asn1
PhoneNumber ::= NumericString (SIZE(1..16))
```
### <a name="PosCentMass"></a>PosCentMass
This DE indicates the perpendicular distance from the centre of mass of an empty load vehicle to the front line of
the vehicle bounding box of the empty load vehicle.
The value shall be set to:
- `n` (`n > 0` and `n < 62`) for any aplicable value n between 0,1 metre and 6,2 metres,
- `62` for values equal to or higher than 6.1 metres,
- `63` if the information is unavailable.
* **tenCentimetres** (1)<br>
* **outOfRange** (62)<br>
* **unavailable** (63)<br>
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 62 has changed slightly)_
NOTE: The empty load vehicle is defined in ISO 1176 [[8]](#references), clause 4.6.
outOfRange (62),
unavailable (63)
} (1..63)
```
### <a name="PositioningSolutionType"></a>PositioningSolutionType
This DE indicates the positioning technology being used to estimate a geographical position.
- 0 `noPositioningSolution` - no positioning solution used,
- 1 `sGNSS` - Global Navigation Satellite System used,
- 2 `dGNSS` - Differential GNSS used,
- 3 `sGNSSplusDR` - GNSS and dead reckoning used,
- 4 `dGNSSplusDR` - Differential GNSS and dead reckoning used,
- 5 `dR` - dead reckoning used.
* **noPositioningSolution** (0)<br>
* **sGNSS** (1)<br>
* **dGNSS** (2)<br>
* **sGNSSplusDR** (3)<br>
* **dGNSSplusDR** (4)<br>
* **dR** (5)<br>
**Categories:** GeoReference information
```asn1
PositioningSolutionType ::= ENUMERATED {
noPositioningSolution (0),
sGNSS (1),
dGNSS (2),
sGNSSplusDR (3),
dGNSSplusDR (4),
dR (5),
...
}
```
### <a name="PositionOfOccupants"></a>PositionOfOccupants
This DE indicates whether a passenger seat is occupied or whether the occupation status is detectable or not.
The number of row in vehicle seats layout is counted in rows from the driver row backwards from front to the rear
of the vehicle.
The left side seat of a row refers to the left hand side seen from vehicle rear to front.
Additionally, a bit is reserved for each seat row, to indicate if the seat occupation of a row is detectable or not,
i.e. `row1NotDetectable (3)`, `row2NotDetectable(8)`, `row3NotDetectable(13)` and `row4NotDetectable(18)`.
Finally, a bit is reserved for each row seat to indicate if the seat row is present or not in the vehicle,
i.e. `row1NotPresent (4)`, `row2NotPresent (9)`, `row3NotPresent(14)`, `row4NotPresent(19)`.
When a seat is detected to be occupied, the corresponding seat occupation bit shall be set to `1`.
For example, when the row 1 left seat is occupied, `row1LeftOccupied(0)` bit shall be set to `1`.
When a seat is detected to be not occupied, the corresponding seat occupation bit shall be set to `0`.
Otherwise, the value of seat occupation bit shall be set according to the following conditions:
- If the seat occupation of a seat row is not detectable, the corresponding bit shall be set to `1`.
When any seat row not detectable bit is set to `1`, all corresponding seat occupation bits of the same row
shall be set to `1`.
- If the seat row is not present, the corresponding not present bit of the same row shall be set to `1`.
When any of the seat row not present bit is set to `1`, the corresponding not detectable bit for that row
shall be set to `1`, and all the corresponding seat occupation bits in that row shall be set to `0`.
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
* **row1LeftOccupied** (0)<br>
* **row1RightOccupied** (1)<br>
* **row1MidOccupied** (2)<br>
* **row1NotDetectable** (3)<br>
* **row1NotPresent** (4)<br>
* **row2LeftOccupied** (5)<br>
* **row2RightOccupied** (6)<br>
* **row2MidOccupied** (7)<br>
* **row2NotDetectable** (8)<br>
* **row2NotPresent** (9)<br>
* **row3LeftOccupied** (10)<br>
* **row3RightOccupied** (11)<br>
* **row3MidOccupied** (12)<br>
* **row3NotDetectable** (13)<br>
* **row3NotPresent** (14)<br>
* **row4LeftOccupied** (15)<br>
* **row4RightOccupied** (16)<br>
* **row4MidOccupied** (17)<br>
* **row4NotDetectable** (18)<br>
* **row4NotPresent** (19)<br>
**Categories:** Vehicle information
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
```asn1
PositionOfOccupants ::= BIT STRING {
row1LeftOccupied (0),
row1RightOccupied (1),
row1MidOccupied (2),
row1NotDetectable (3),
row1NotPresent (4),
row2LeftOccupied (5),
row2RightOccupied (6),
row2MidOccupied (7),
row2NotDetectable (8),
row2NotPresent (9),
row3LeftOccupied (10),
row3RightOccupied (11),
row3MidOccupied (12),
row3NotDetectable (13),
row3NotPresent (14),
row4LeftOccupied (15),
row4RightOccupied (16),
row4MidOccupied (17),
row4NotDetectable (18),
row4NotPresent (19)
} (SIZE(20))
```
### <a name="PosFrontAx"></a>PosFrontAx
This DE indicates the perpendicular distance between the vehicle front line of the bounding box and the front wheel axle in 0,1 metre.
- `n` (`n > 0` and `n < 19`) for any aplicable value between 0,1 metre and 1,9 metres,
- `19` for values equal to or higher than 1.8 metres,
- `20` if the information is unavailable.
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 19 has changed slightly)_
```asn1
PosFrontAx ::= INTEGER {
outOfRange (19),
unavailable(20)
} (1..20)
```
### <a name="PosLonCarr"></a>PosLonCarr
This DE represents the distance from the centre of vehicle front bumper to the right or left longitudinal carrier of vehicle.
The left/right carrier refers to the left/right as seen from a passenger sitting in the vehicle.
The value shall be set to:
- `n` (`n > 0` and `n < 126`) for any aplicable value between 0,01 metre and 1,26 metres,
- `126` for values equal to or higher than 1.25 metres,
- `127` if the information is unavailable.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 126 has changed slightly)_
```asn1
PosLonCarr ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="PosPillar"></a>PosPillar
This DE represents the perpendicular inter-distance of neighbouring pillar axis of vehicle starting from the
middle point of the front line of the vehicle bounding box.
The value shall be set to:
- `n` (`n > 0` and `n < 29`) for any aplicable value between 0,1 metre and 2,9 metres,
- `29` for values equal to or greater than 2.8 metres,
- `30` if the information is unavailable.
* **outOfRange** (29)<br>
* **unavailable** (30)<br>
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 29 has changed slightly)_
```asn1
PosPillar ::= INTEGER {
outOfRange (29),
unavailable (30)
} (1..30)
```
### <a name="PostCrashSubCauseCode"></a>PostCrashSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `postCrash` .
- 0 `unavailable` - in case further detailed information on post crash event is unavailable,
- 1 `accidentWithoutECallTriggered` - in case no eCall has been triggered for an accident,
- 2 `accidentWithECallManuallyTriggered` - in case eCall has been manually triggered and transmitted to eCall back end,
- 3 `accidentWithECallAutomaticallyTriggered` - in case eCall has been automatically triggered and transmitted to eCall back end,
- 4 `accidentWithECallTriggeredWithoutAccessToCellularNetwork` - in case eCall has been triggered but cellular network is not accessible from triggering vehicle.
* **unavailable** (0)<br>
* **accidentWithoutECallTriggered** (1)<br>
* **accidentWithECallManuallyTriggered** (2)<br>
* **accidentWithECallAutomaticallyTriggered** (3)<br>
* **accidentWithECallTriggeredWithoutAccessToCellularNetwork** (4)<br>
**Categories:** Traffic information
```asn1
PostCrashSubCauseCode ::= INTEGER {
unavailable (0),
accidentWithoutECallTriggered (1),
accidentWithECallManuallyTriggered (2),
accidentWithECallAutomaticallyTriggered (3),
accidentWithECallTriggeredWithoutAccessToCellularNetwork (4)
} (0..255)
```
### <a name="PrecipitationIntensity"></a>PrecipitationIntensity
This DE represent the total amount of rain falling during one hour. It is measured in mm per hour at an area of 1 square metre.
- `n` (`n > 0` and `n < 2000`) if the amount of rain falling is equal to or less than n x 0,1 mm/h and greater than (n-1) x 0,1 mm/h,
- `2000` if the amount of rain falling is greater than 199.9 mm/h,
- `2001` if the information is not available.
* **outOfRange** (2000)<br>
* **unavailable** (2001)<br>
**Categories:** Basic Information
**Revision:** _created in V2.1.1_
```asn1
PrecipitationIntensity ::= INTEGER {
outOfRange (2000),
unavailable (2001)
} (1..2001)
```
This DE represents the indentifier of a protected communication zone.
**Categories:** Infrastructure information Communication information
**Revision:** _Revision in V2.1.1 (changed name from ProtectedZoneID to ProtectedZoneId)_
```
### <a name="ProtectedZoneRadius"></a>ProtectedZoneRadius
This DE represents the radius of a protected communication zone.
**Categories:** Infrastructure information Communication information
```asn1
ProtectedZoneRadius ::= INTEGER (1..255,...)
```
### <a name="ProtectedZoneType"></a>ProtectedZoneType
This DE indicates the type of a protected communication zone, so that an ITS-S is aware of the actions to do
while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station).
The protected zone type is defined in ETSI TS 102 792 [[14]](#references).
* **permanentCenDsrcTolling** (0)<br>
* **temporaryCenDsrcTolling** (1)<br>
...,
**Categories:** Communication information
```asn1
ProtectedZoneType::= ENUMERATED {
permanentCenDsrcTolling (0),
...,
temporaryCenDsrcTolling (1)
}
```
### <a name="PtActivationData"></a>PtActivationData
This DE is used for various tasks in the public transportation environment, especially for controlling traffic
signal systems to prioritize and speed up public transportation in urban area (e.g. intersection "_bottlenecks_").
The traffic lights may be controlled by an approaching bus or tram automatically. This permits "_In Time_" activation
of the green phase, will enable the individual traffic to clear a potential traffic jam in advance. Thereby the
approaching bus or tram may pass an intersection with activated green light without slowing down the speed due to
traffic congestion. Other usage of the DE is the provision of information like the public transport line number
or the schedule delay of a public transport vehicle.
**Categories:** Vehicle information
```asn1
PtActivationData ::= OCTET STRING (SIZE(1..20))
```
### <a name="PtActivationType"></a>PtActivationType
This DE indicates a certain coding type of the PtActivationData data.
- 0 `undefinedCodingType` : undefined coding type,
- 1 `r09-16CodingType` : coding of PtActivationData conform to VDV recommendation 420 [[7]](#references),
- 2 `vdv-50149CodingType` : coding of PtActivationData based on VDV recommendation 420 [[7]](#references).
- 3 - 255 : reserved for alternative and future use.
* **undefinedCodingType** (0)<br>
* **r09-16CodingType** (1)<br>
* **vdv-50149CodingType** (2)<br>
**Categories:** Vehicle information
```asn1
PtActivationType ::= INTEGER {
undefinedCodingType (0),
r09-16CodingType (1),
vdv-50149CodingType (2)
} (0..255)
```
### <a name="RailwayLevelCrossingSubCauseCode"></a>RailwayLevelCrossingSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `railwayLevelCrossing` .
- 0 `unavailable` - in case no further detailed information on the railway level crossing status is available,
- 1 `doNotCrossAbnormalSituation` - in case when something wrong is detected by equation or sensors of the railway level crossing,
including level crossing is closed for too long (e.g. more than 10 minutes long ; default value),
- 2 `closed` - in case the crossing is closed (barriers down),
- 3 `unguarded` - in case the level crossing is unguarded (i.e a Saint Andrew cross level crossing without detection of train),
- 4 `nominal` - in case the barriers are up and lights are off.
* **unavailable** (0)<br>
* **doNotCrossAbnormalSituation** (1)<br>
* **closed** (2)<br>
* **unguarded** (3)<br>
* **nominal** (4)<br>
**Categories:** Traffic information
```asn1
RailwayLevelCrossingSubCauseCode ::= INTEGER {
unavailable (0),
doNotCrossAbnormalSituation (1),
closed (2),
unguarded (3),
nominal (4)
} (0..255)
```
### <a name="RelevanceDistance"></a>RelevanceDistance
This DE describes a distance of relevance for information indicated in a message.
- 0 `lessThan50m` - for distances below 50 m,
- 1 `lessThan100m` - for distances below 100 m,
- 2 `lessThan200m` - for distances below 200 m,
- 3 `lessThan500m` - for distances below 300 m,
- 4 `lessThan1000m` - for distances below 1 000 m,
- 5 `lessThan5km` - for distances below 5 000 m,
- 6 `lessThan10km` - for distances below 10 000 m,
- 7 `over10km` - for distances over 10 000 m.
**Categories:** GeoReference information
**Revision:** _Editorial update in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**StandardLength3b**](#StandardLength3b) instead.
>>>
```asn1
RelevanceDistance ::= ENUMERATED {
lessThan50m(0),
lessThan100m(1),
lessThan200m(2),
lessThan500m(3),
lessThan1000m(4),
lessThan5km(5),
lessThan10km(6),
over10km(7)
}
```
### <a name="RelevanceTrafficDirection"></a>RelevanceTrafficDirection
This DE indicates a traffic direction that is relevant to information indicated in a message.
- 0 `allTrafficDirections` - for all traffic directions,
- 1 `upstreamTraffic` - for upstream traffic,
- 2 `downstreamTraffic` - for downstream traffic,
- 3 `oppositeTraffic` - for traffic in the opposite direction.
The terms `upstream`, `downstream` and `oppositeTraffic` are relative to the event position.
**Categories:** GeoReference information
**Revision:** _Editorial update in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrafficDirection**](#TrafficDirection) instead.
>>>
```asn1
RelevanceTrafficDirection ::= ENUMERATED {
allTrafficDirections(0),
upstreamTraffic(1),
downstreamTraffic(2),
oppositeTraffic(3)
}
```
### <a name="RequestResponseIndication"></a>RequestResponseIndication
This DE indicates whether an ITS message is transmitted as request from ITS-S or a response transmitted from
ITS-S after receiving request from other ITS-Ss.
The value shall be set to:
- 0 `request` - for a request message,
- 1 `response` - for a response message.
* **request** (0)<br>
* **response** (1)<br>
**Categories:** Communication information
**Revision:** _Editorial update in V2.1.1_
```asn1
RequestResponseIndication ::= ENUMERATED {
request (0),
response (1)
}
```
### <a name="RescueAndRecoveryWorkInProgressSubCauseCode"></a>RescueAndRecoveryWorkInProgressSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `rescueAndRecoveryWorkInProgress`
- 0 `unavailable` - in case further detailed information on rescue and recovery work is unavailable,
- 1 `emergencyVehicles` - in case rescue work is ongoing by emergency vehicles,
- 2 `rescueHelicopterLanding` - in case rescue helicopter is landing,
- 3 `policeActivityOngoing` - in case police activity is ongoing,
- 4 `medicalEmergencyOngoing` - in case medical emergency recovery is ongoing,
- 5 `childAbductionInProgress`- in case a child kidnapping alarm is activated and rescue work is ongoing,
* **unavailable** (0)<br>
* **emergencyVehicles** (1)<br>
* **rescueHelicopterLanding** (2)<br>
* **policeActivityOngoing** (3)<br>
* **medicalEmergencyOngoing** (4)<br>
* **childAbductionInProgress** (5)<br>
**Categories:** Traffic information
```asn1
RescueAndRecoveryWorkInProgressSubCauseCode ::= INTEGER {
unavailable (0),
emergencyVehicles (1),
rescueHelicopterLanding (2),
policeActivityOngoing (3),
medicalEmergencyOngoing (4),
childAbductionInProgress (5)
} (0..255)
```
### <a name="RoadType"></a>RoadType
- 0 `urban-NoStructuralSeparationToOppositeLanes` - for an urban road with no structural separation between lanes carrying traffic in opposite directions,
- 1 `urban-WithStructuralSeparationToOppositeLanes` - for an urban road with structural separation between lanes carrying traffic in opposite directions,
- 2 `nonUrban-NoStructuralSeparationToOppositeLanes` - for an non urban road with no structural separation between lanes carrying traffic in opposite directions,
- 3 `nonUrban-WithStructuralSeparationToOppositeLanes` - for an non urban road with structural separation between lanes carrying traffic in opposite directions.
* **urban-NoStructuralSeparationToOppositeLanes** (0)<br>
* **urban-WithStructuralSeparationToOppositeLanes** (1)<br>
* **nonUrban-NoStructuralSeparationToOppositeLanes** (2)<br>
* **nonUrban-WithStructuralSeparationToOppositeLanes** (3)<br>
**Categories:** Road Topology Information
**Revision:** _Editorial update in V2.1.1_
```asn1
RoadType ::= ENUMERATED {
urban-NoStructuralSeparationToOppositeLanes (0),
urban-WithStructuralSeparationToOppositeLanes (1),
nonUrban-NoStructuralSeparationToOppositeLanes (2),
nonUrban-WithStructuralSeparationToOppositeLanes (3)
}
```
### <a name="RoadworksSubCauseCode"></a>RoadworksSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `roadworks`.
- 0 `unavailable` - in case further detailed information on roadworks is unavailable,
- 1 `majorRoadworks` - in case a major roadworks is ongoing,
- 2 `roadMarkingWork` - in case a road marking work is ongoing,
- 3 `slowMovingRoadMaintenance` - in case slow moving road maintenance work is ongoing,
- 4 `shortTermStationaryRoadworks`- in case a short term stationary roadwork is ongoing,
- 5 `streetCleaning` - in case a vehicle street cleaning work is ongoing,
- 6 `winterService` - in case winter service work is ongoing.
* **unavailable** (0)<br>
* **majorRoadworks** (1)<br>
* **roadMarkingWork** (2)<br>
* **slowMovingRoadMaintenance** (3)<br>
* **shortTermStationaryRoadworks** (4)<br>
* **streetCleaning** (5)<br>
* **winterService** (6)<br>
**Categories:** Traffic information
```asn1
RoadworksSubCauseCode ::= INTEGER {
unavailable (0),
majorRoadworks (1),
roadMarkingWork (2),
slowMovingRoadMaintenance (3),
shortTermStationaryRoadworks (4),
streetCleaning (5),
winterService (6)
} (0..255)
```
### <a name="SafeDistanceIndicator"></a>SafeDistanceIndicator
- `FALSE` if the triple {LaD, LoD, VD} < {MSLaD, MSLoD, MSVD} is simultaneously satisfied with confidence level of 90 % or more,
- `TRUE` otherwise.
**Categories:** Traffic information Kinematic information
**Revision:** _created in V2.1.1_
NOTE: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD)
and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD).
```asn1
SafeDistanceIndicator::= BOOLEAN
```
### <a name="SemiAxisLength"></a>SemiAxisLength
This DE indicates the horizontal position confidence value which represents the estimated absolute position accuracy, in one of the axis direction as defined in a shape of ellipse with a
confidence level of 95 %.
The value shall be set to:
- `n` (`n > 0` and `n < 4 094`) if the accuracy is equal to or less than n * 0,01 metre,
- `4 094` if the accuracy is out of range, i.e. greater than 4,093 m,
- `4 095` if the accuracy information is unavailable.
* **doNotUse** (0)<br>
* **outOfRange** (4094)<br>
* **unavailable** (4095)<br>
**Categories:** GeoReference Information
**Revision:** _Description revised in V2.1.1_
NOTE: The fact that a position coordinate value is received with confidence value set to `unavailable(4095)`.
can be caused by several reasons, such as:
- the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
- the sensor cannot calculate the accuracy due to lack of variables, or
- there has been a vehicle bus (e.g. CAN bus) error.
In all 3 cases above, the position coordinate value may be valid and used by the application.
If a position coordinate value is received and its confidence value is set to `outOfRange(4094)`, it means that
the position coordinate value is not valid and therefore cannot be trusted. Such value is not useful
for the application.
>>>
```asn1
SemiAxisLength ::= INTEGER{
outOfRange (4094),
unavailable (4095)
} (0..4095)
```
### <a name="SensorType"></a>SensorType
- 0 `undefined` - in case the sensor type is undefined.
- 1 `radar` - in case the sensor is a radar,
- 2 `lidar` - in case the sensor is a lidar,
- 3 `monovideo` - in case the sensor is mono video,
- 4 `stereovision` - in case the sensor is stereo vision,
- 5 `nightvision` - in case the sensor is night vision,
- 6 `ultrasonic` - in case the sensor is ultrasonic,
- 7 `pmd` - in case the sensor is photonic mixing device,
- 8 `inductionLoop` - in case the sensor is an induction loop,
- 9 `sphericalCamera` - in case the sensor is a spherical camera,
- 10 `uwb` - in case the sensor is ultra wide band,
- 11 `acoustic` - in case the sensor is acoustic,
- 12 `localAggregation` - in case the information is provided by a system that aggregates information from different local sensors. Aggregation may include fusion,
- 13 `itsAggregation` - in case the information is provided by a system that aggregates information from other received ITS messages.
* **undefined** (0)<br>
* **radar** (1)<br>
* **lidar** (2)<br>
* **monovideo** (3)<br>
* **stereovision** (4)<br>
* **nightvision** (5)<br>
* **ultrasonic** (6)<br>
* **pmd** (7)<br>
* **inductionLoop** (8)<br>
* **sphericalCamera** (9)<br>
* **uwb** (10)<br>
* **acoustic** (11)<br>
* **localAggregation** (12)<br>
* **itsAggregation** (13)<br>
**Categories:** Sensing Information
**Revision:** _created in V2.1.1_
undefined (0),
radar (1),
lidar (2),
monovideo (3),
stereovision (4),
nightvision (5),
ultrasonic (6),
pmd (7),
inductionLoop (8),
sphericalCamera (9),
uwb (10),
acoustic (11),
localAggregation (12),
itsAggregation (13)
```
### <a name="SequenceNumber"></a>SequenceNumber
**Categories:** Basic information
```asn1
SequenceNumber ::= INTEGER (0..65535)
```
### <a name="SignalViolationSubCauseCode"></a>SignalViolationSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `signalViolation`.
- 0 `unavailable` - in case further detailed information on signal violation event is unavailable,
- 1 `stopSignViolation` - in case a stop sign violation is detected,
- 2 `trafficLightViolation` - in case a traffic light violation is detected,
- 3 `turningRegulationViolation`- in case a turning regulation violation is detected.
* **unavailable** (0)<br>
* **stopSignViolation** (1)<br>
* **trafficLightViolation** (2)<br>
* **turningRegulationViolation** (3)<br>
**Categories:** Traffic information
```asn1
SignalViolationSubCauseCode ::= INTEGER {
unavailable (0),
stopSignViolation (1),
trafficLightViolation (2),
turningRegulationViolation (3)
} (0..255)
```
### <a name="SlowVehicleSubCauseCode"></a>SlowVehicleSubCauseCode
This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) "slowVehicle".
- 0 `unavailable` - in case further detailed information on slow vehicle driving event is
- 1 `maintenanceVehicle` - in case of a slow driving maintenance vehicle on the road,
- 2 `vehiclesSlowingToLookAtAccident`- in case vehicle is temporally slowing down to look at accident, spot, etc.,
- 3 `abnormalLoad` - in case an abnormal loaded vehicle is driving slowly on the road,
- 4 `abnormalWideLoad` - in case an abnormal wide load vehicle is driving slowly on the road,
- 5 `convoy` - in case of slow driving convoy on the road,
- 6 `snowplough` - in case of slow driving snow plough on the road,
- 7 `deicing` - in case of slow driving de-icing vehicle on the road,
- 8 `saltingVehicles` - in case of slow driving salting vehicle on the road.
* **unavailable** (0)<br>
* **maintenanceVehicle** (1)<br>
* **vehiclesSlowingToLookAtAccident** (2)<br>
* **abnormalLoad** (3)<br>
* **abnormalWideLoad** (4)<br>
* **convoy** (5)<br>
* **snowplough** (6)<br>
* **deicing** (7)<br>
* **saltingVehicles** (8)<br>
**Categories:** Traffic information
```asn1
SlowVehicleSubCauseCode ::= INTEGER {
unavailable (0),
maintenanceVehicle (1),
vehiclesSlowingToLookAtAccident (2),
abnormalLoad (3),
abnormalWideLoad (4),
convoy (5),
snowplough (6),
deicing (7),
saltingVehicles (8)
} (0..255)
```
### <a name="SpecialTransportType"></a>SpecialTransportType
The DE indicates if a vehicle is carrying goods in the special transport conditions.
The corresponding bit shall be set to 1 under the following conditions:
- 0 `heavyLoad` - the vehicle is carrying goods with heavy load,
- 1 `excessWidth` - the vehicle is carrying goods in excess of width,
- 2 `excessLength` - the vehicle is carrying goods in excess of length,
- 3 `excessHeight` - the vehicle is carrying goods in excess of height.
Otherwise, the corresponding bit shall be set to 0.
* **heavyLoad** (0)<br>
* **excessWidth** (1)<br>
* **excessLength** (2)<br>
* **excessHeight** (3)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
```asn1
SpecialTransportType ::= BIT STRING {
heavyLoad (0),
excessWidth (1),
excessLength (2),
excessHeight (3)
} (SIZE(4))
```
### <a name="SpeedConfidence"></a>SpeedConfidence
This DE indicates the speed confidence value which represents the estimated absolute accuracy of a speed value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 126`) if the confidence value is equal to or less than n * 0,01 m/s.
- `126` if the confidence value is out of range, i.e. greater than 1,25 m/s,
- `127` if the confidence value information is not available.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: If a speed value is received and its confidence value is set to `outOfRange(126)`, it means that the speed value is not valid
and therefore cannot be trusted. Such is not useful for the application.
>>>
```asn1
SpeedConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="SpeedLimit"></a>SpeedLimit
This DE represents a speed limitation applied to a geographical position, a road section or a geographical region.
**Categories:** Infrastructure information Traffic information
```asn1
SpeedLimit ::= INTEGER (1..255)
```
### <a name="SpeedValue"></a>SpeedValue
This DE represents a speed value, i.e. the magnitude of the velocity-vector.
- `0` in a standstill situation.
- `n` (`n > 0` and `n < 16 382`) if the applicable value is equal to or less than n x 0,01 m/s, and greater than (n-1) x 0,01 m/s,
- `16 382` for speed values greater than 163,81 m/s,
- `16 383` if the speed accuracy information is not available.
* **standstill** (0)<br>
* **outOfRange** (16382)<br>
* **unavailable** (16383)<br>
**Categories:** Kinematic information
**Revision:** _Description revised in V2.1.1 (the meaning of 16382 has changed slightly)_
NOTE: the definition of standstill is out of scope of the present document.
```asn1
SpeedValue ::= INTEGER {
standstill (0),
outOfRange (16382),
unavailable (16383)
} (0..16383)
```
### <a name="VelocityComponentValue"></a>VelocityComponentValue
This DE represents the value of a velocity component in a defined coordinate system.
- `-16 383` if the velocity is equal to or smaller than -163,83 m/s,
- `n` (`n > -16 383` and `n < 16 382`) if the applicable value is equal to or less than n x 0,01 m/s, and greater than (n-1) x 0,01 m/s,
- `16 382` for velocity values equal to or greater than 163,81 m/s,
- `16 383` if the velocity information is not available.
* **negativeOutOfRange** (-16383)<br>
* **positiveOutOfRange** (16382)<br>
* **unavailable** (16383)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
unavailable (16383)
} (-16383..16383)
```
### <a name="StabilityLossProbability"></a>StabilityLossProbability
This DE indicates the estimated probability of a stability level and conversely also the probability of a stability loss.
- `0` to indicate an estimated probability of a loss of stability of 0 %, i.e. "stable",
- `n` (`n > 0` and `n < 50`) to indicate the actual stability level,
- `50` to indicate a estimated probability of a loss of stability of 100 %, i.e. "total loss of stability",
- the values between 51 and 62 are reserved for future use,
- `63`: this value indicates that the information is unavailable.
* **stable** (0)<br>
* **totalLossOfStability** (50)<br>
* **unavailable** (63)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
StabilityLossProbability ::= INTEGER {
stable (0),
totalLossOfStability (50),
unavailable (63)
} (0..63)
```
### <a name="StandardLength12b"></a>StandardLength12b
The DE represents length as a measure of distance between points or as a dimension of an object or shape.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength12b::= INTEGER (0..4095)
```
### <a name="StandardLength3b"></a>StandardLength3b
The DE represents length as a measure of distance between points.
- 0 `lessThan50m` - for distances below 50 m,
- 1 `lessThan100m` - for distances below 100 m,
- 2 `lessThan200m` - for distances below 200 m,
- 3 `lessThan500m` - for distances below 300 m,
- 4 `lessThan1000m` - for distances below 1 000 m,
- 5 `lessThan5km` - for distances below 5 000 m,
- 6 `lessThan10km` - for distances below 10 000 m,
- 7 `over10km` - for distances over 10 000 m.
* **lessThan50m** (0)<br>
* **lessThan100m** (1)<br>
* **lessThan200m** (2)<br>
* **lessThan500m** (3)<br>
* **lessThan1000m** (4)<br>
* **lessThan5km** (5)<br>
* **lessThan10km** (6)<br>
* **over10km** (7)<br>
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1 from RelevanceDistance_
```asn1
StandardLength3b ::= ENUMERATED {
lessThan50m (0),
lessThan100m (1),
lessThan200m (2),
lessThan500m (3),
lessThan1000m (4),
lessThan5km (5),
lessThan10km (6),
over10km (7)
}
```
### <a name="StandardLength9b"></a>StandardLength9b
The DE represents length as a measure of distance between points or as a dimension of an object.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength9b::= INTEGER (0..511)
```
### <a name="StandardLength1B"></a>StandardLength1B
The DE represents length as a measure of distance between points or as a dimension of an object.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength1B::= INTEGER (0..255)
```
### <a name="StandardLength2B"></a>StandardLength2B
The DE represents length as a measure of distance between points or as a dimension of an object.
**Categories:** Basic information