Newer
Older
# <a name="ETSI-ITS-CDD"></a>ASN.1 module ETSI-ITS-CDD
OID: _{itu-t (0) identified-organization (4) etsi (0) itsDomain (5) wg1 (1) 102894 cdd (2) major-version-4 (4) minor-version-1 (1)}_
draft 008 of the CCD module for TS 102 894-2 V2.2.1 integrating:
- ITSWG1(23)062003 Update VAM parameters definitions in ITS Common Data Dictionary
- ITSWG1(23)063016 CPM ASN.1 format (CDD+CPS)
- ITSWG1(23)063017 Generalize the opening angles of the radial shape options
- ITSWG1(23)063018 Generalize the orientation of the DF Shape
- ITSWG1(23)063012 CDD extension to enable Road Configuration Container in DENMs
- ITSWG1(23)000078 CDD extension to enable Road Configuration Container in DENMs with JTI changes
- ITSWG1(23)063001r2 Extend LaneInformation to cover more scenarios
- ITSWG1(23)063005r1 Add DEs and DFs to allow referring to IVIMs and MAPEMs
- ITSWG1(23)063005r1 Add DE and DFs to support traces leading to any eventZone point.
- ITSWG1(23)000088 Add SubCauseCodes to CauseCode 5 (Impassability)
- ITSWG1(23)000118 CDD extension to enable Proposal for encoding areas in location container in DENMs through predicted paths
- ITSWG1(23)063005r1 Define CauseCode 28 for public transport vehicle approaching
- ITSWG1(23)063005r1 Add subCauseCodes to causeCode 15 RescueAndRecoveryWorkInProgress
- ITSWG1(23)063005r1 Extend the DE PositioningSolution
- ITSWG1(23)063009 Adding one option in CDD at the level of DE PositioningSolutionType
- ITSWG1(23)063005r1 Align definition of CauseCode 95 with the existing subCauseCodes
- ITSWG1(23)063005r1 Extend the DE TrafficRule
- ITSWG1(23)000132 Clarify and Add SubCauseCodes to CauseCode 1 TrafficCondition
- ITSWG1(23)000132 Add subCauseCodes to causeCode 11 HazardousLocation-AnimalOnTheRoad
- ITSWG1(23)000132 Add subCauseCodes to causeCode 12 humanPresenceOnTheRoad
- ITSWG1(23)000134 Relative event position using road configuration container in DENM
- ITSWG1(23)064026 CDD extension to enable Proposal for encoding areas in location container in DENMs through predicted paths
- ITSWG1(23)000192r1 Bosch comments for DENM Release 2
- ITSWG1(23)000195 BMF comments to CDD Release 2
- ITSWG1(23)000193 TS 102 894-2 CR adding sub-cause codes to impassability cause code
## Data Elements:
### <a name="AccelerationChange"></a>AccelerationChange
- 0 - `accelerate` - if the magnitude of the horizontal velocity vector increases.
- 1 - `decelerate` - if the magnitude of the horizontal velocity vector decreases.
* **accelerate** (0)<br>
* **decelerate** (1)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AccelerationChange::= ENUMERATED {
accelerate (0),
decelerate (1)
}
```
### <a name="AccelerationConfidence"></a>AccelerationConfidence
This DE indicates the acceleration confidence value which represents the estimated absolute accuracy of an acceleration value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 101`) if the confidence value is equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `101` if the confidence value is out of range i.e. greater than 10 m/s<sup>2</sup>,
- `102` if the confidence value is unavailable.
* **outOfRange** (101)<br>
* **unavailable** (102)<br>
**Unit:** _0,1 m/s<sup>2</sup>_
**Categories:** Kinematic information
**Revision:** _Description revised in V2.1.1_
NOTE: If an acceleration value is received and its confidence value is set to `outOfRange(101)`, it means that the value is not valid and therefore cannot be trusted. Such value is not useful for the application.
```asn1
AccelerationConfidence ::= INTEGER {
outOfRange (101),
unavailable (102)
} (0..102)
```
### <a name="AccelerationControl"></a>AccelerationControl
This DE indicates the current controlling mechanism for longitudinal movement of the vehicle.
The data may be provided via the in-vehicle network. It indicates whether a specific in-vehicle
acceleration control system is engaged or not. Currently, this DE includes the information of the
vehicle brake pedal, gas pedal, emergency brake system, collision warning system, adaptive cruise
control system, cruise control system and speed limiter system.
The corresponding bit shall be set to 1 under the following conditions:
- 0 - `brakePedalEngaged` - Driver is stepping on the brake pedal,
- 1 - `gasPedalEngaged` - Driver is stepping on the gas pedal,
- 2 - `emergencyBrakeEngaged` - emergency brake system is engaged,
- 3 - `collisionWarningEngaged`- collision warning system is engaged,
- 4 - `accEngaged` - ACC is engaged,
- 5 - `cruiseControlEngaged` - cruise control is engaged,
- 6 - `speedLimiterEngaged` - speed limiter is engaged.
Otherwise (for example when the corresponding system is not available due to non equipped system
or information is unavailable), the corresponding bit shall be set to 0.
* **brakePedalEngaged** (0)<br>
* **gasPedalEngaged** (1)<br>
* **emergencyBrakeEngaged** (2)<br>
* **collisionWarningEngaged** (3)<br>
* **accEngaged** (4)<br>
* **cruiseControlEngaged** (5)<br>
* **speedLimiterEngaged** (6)<br>
**Categories:** Vehicle information
NOTE: The system engagement condition is OEM specific and therefore out of scope of the present document.
```asn1
AccelerationControl ::= BIT STRING {
brakePedalEngaged (0),
gasPedalEngaged (1),
emergencyBrakeEngaged (2),
collisionWarningEngaged (3),
accEngaged (4),
cruiseControlEngaged (5),
speedLimiterEngaged (6)
} (SIZE(7))
```
### <a name="AccelerationMagnitudeValue"></a>AccelerationMagnitudeValue
This DE represents the magnitude of the acceleration vector in a defined coordinate system.
- `0` to indicate no acceleration,
- `n` (`n > 0` and `n < 160`) to indicate acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `160` for acceleration values greater than 15,9 m/s<sup>2</sup>,
- `161` when the data is unavailable.
* **positiveOutOfRange** (160)<br>
* **unavailable** (161)<br>
**Unit:** _0,1 m/s<sup>2</sup>_
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AccelerationMagnitudeValue ::= INTEGER {
positiveOutOfRange (160),
unavailable (161)
} (0.. 161)
```
### <a name="AccelerationValue"></a>AccelerationValue
This DE represents the value of an acceleration component in a defined coordinate system.
- `-160` for acceleration values equal to or less than -16 m/s<sup>2</sup>,
- `n` (`n > -160` and `n ≤ 0`) to indicate negative acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `n` (`n > 0` and `n < 160`) to indicate positive acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `160` for acceleration values greater than 15,9 m/s<sup>2</sup>,
- `161` when the data is unavailable.
* **negativeOutOfRange** (-160)<br>
* **positiveOutOfRange** (160)<br>
* **unavailable** (161)<br>
**Unit:** _0,1 m/s<sup>2</sup>_
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
NOTE: the formula for values > -160 and <160 results in rounding up to the next value. Zero acceleration is indicated using n=0.
```asn1
AccelerationValue ::= INTEGER {
negativeOutOfRange (-160),
positiveOutOfRange (160),
unavailable (161)
} (-160 .. 161)
```
### <a name="AccessTechnologyClass"></a>AccessTechnologyClass
- `0`: in case of any access technology class,
- `1`: in case of ITS-G5 access technology class,
- `2`: in case of LTE-V2X access technology class,
- `3`: in case of NR-V2X access technology class.
* **any** (0)<br>
* **itsg5Class** (1)<br>
* **ltev2xClass** (2)<br>
* **nrv2xClass** (3)<br>
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
```asn1
AccessTechnologyClass ::= ENUMERATED {
any (0),
itsg5Class (1),
ltev2xClass (2),
nrv2xClass (3),
...
}
```
### <a name="AccidentSubCauseCode"></a>AccidentSubCauseCode
This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `accident`.
- 0 - `unavailable` - in case the information on the sub cause of the accident is unavailable,
- 1 - `multiVehicleAccident` - in case more than two vehicles are involved in accident,
- 2 - `heavyAccident` - in case the airbag of the vehicle involved in the accident is triggered,
the accident requires important rescue and/or recovery work,
- 3 - `accidentInvolvingLorry` - in case the accident involves a lorry,
- 4 - `accidentInvolvingBus` - in case the accident involves a bus,
- 5 - `accidentInvolvingHazardousMaterials`- in case the accident involves hazardous material,
- 6 - `accidentOnOppositeLane` - in case the accident happens on opposite lanes,
- 7 - `unsecuredAccident` - in case the accident is not secured,
- 8 - `assistanceRequested` - in case rescue and assistance are requested,
* **unavailable** (0)<br>
* **multiVehicleAccident** (1)<br>
* **heavyAccident** (2)<br>
* **accidentInvolvingLorry** (3)<br>
* **accidentInvolvingBus** (4)<br>
* **accidentInvolvingHazardousMaterials** (5)<br>
* **accidentOnOppositeLane** (6)<br>
* **unsecuredAccident** (7)<br>
* **assistanceRequested** (8)<br>
**Categories:** Traffic information
```asn1
AccidentSubCauseCode ::= INTEGER {
unavailable (0),
multiVehicleAccident (1),
heavyAccident (2),
accidentInvolvingLorry (3),
accidentInvolvingBus (4),
accidentInvolvingHazardousMaterials (5),
accidentOnOppositeLane (6),
unsecuredAccident (7),
assistanceRequested (8)
} (0..255)
```
### <a name="AdverseWeatherCondition-AdhesionSubCauseCode"></a>AdverseWeatherCondition-AdhesionSubCauseCode
This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-Adhesion`.
- 0 - `unavailable` - in case information on the cause of the low road adhesion is unavailable,
- 1 - `heavyFrostOnRoad`- in case the low road adhesion is due to heavy frost on the road,
- 2 - `fuelOnRoad` - in case the low road adhesion is due to fuel on the road,
- 3 - `mudOnRoad` - in case the low road adhesion is due to mud on the road,
- 4 - `snowOnRoad` - in case the low road adhesion is due to snow on the road,
- 5 - `iceOnRoad` - in case the low road adhesion is due to ice on the road,
- 6 - `blackIceOnRoad` - in case the low road adhesion is due to black ice on the road,
- 7 - `oilOnRoad` - in case the low road adhesion is due to oil on the road,
- 8 - `looseChippings` - in case the low road adhesion is due to loose gravel or stone fragments detached from a road surface or from a hazard,
- 9 - `instantBlackIce` - in case the low road adhesion is due to instant black ice on the road surface,
- 10 - `roadsSalted` - when the low road adhesion is due to salted road,
* **unavailable** (0)<br>
* **heavyFrostOnRoad** (1)<br>
* **fuelOnRoad** (2)<br>
* **mudOnRoad** (3)<br>
* **snowOnRoad** (4)<br>
* **iceOnRoad** (5)<br>
* **blackIceOnRoad** (6)<br>
* **oilOnRoad** (7)<br>
* **looseChippings** (8)<br>
* **instantBlackIce** (9)<br>
* **roadsSalted** (10)<br>
**Categories:** Traffic information
```asn1
AdverseWeatherCondition-AdhesionSubCauseCode ::= INTEGER {
unavailable (0),
heavyFrostOnRoad (1),
fuelOnRoad (2),
mudOnRoad (3),
snowOnRoad (4),
iceOnRoad (5),
blackIceOnRoad (6),
oilOnRoad (7),
looseChippings (8),
instantBlackIce (9),
roadsSalted (10)
} (0..255)
```
### <a name="AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode"></a>AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-ExtremeWeatherCondition`.
- 0 - `unavailable` - in case information on the type of extreme weather condition is unavailable,
- 1 - `strongWinds` - in case the type of extreme weather condition is strong wind,
- 2 - `damagingHail`- in case the type of extreme weather condition is damaging hail,
- 3 - `hurricane` - in case the type of extreme weather condition is hurricane,
- 4 - `thunderstorm`- in case the type of extreme weather condition is thunderstorm,
- 5 - `tornado` - in case the type of extreme weather condition is tornado,
- 6 - `blizzard` - in case the type of extreme weather condition is blizzard.
* **unavailable** (0)<br>
* **strongWinds** (1)<br>
* **damagingHail** (2)<br>
* **hurricane** (3)<br>
* **thunderstorm** (4)<br>
* **tornado** (5)<br>
* **blizzard** (6)<br>
**Categories:** Traffic information
```asn1
AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode ::= INTEGER {
unavailable (0),
strongWinds (1),
damagingHail (2),
hurricane (3),
thunderstorm (4),
tornado (5),
blizzard (6)
} (0..255)
```
### <a name="AdverseWeatherCondition-PrecipitationSubCauseCode"></a>AdverseWeatherCondition-PrecipitationSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-Precipitation`.
- 0 - `unavailable` - in case information on the type of precipitation is unavailable,
- 1 - `heavyRain` - in case the type of precipitation is heavy rain,
- 2 - `heavySnowfall` - in case the type of precipitation is heavy snow fall,
- 3 - `softHail` - in case the type of precipitation is soft hail.
* **unavailable** (0)<br>
* **heavyRain** (1)<br>
* **heavySnowfall** (2)<br>
* **softHail** (3)<br>
**Categories:** Traffic information
```asn1
AdverseWeatherCondition-PrecipitationSubCauseCode ::= INTEGER {
unavailable (0),
heavyRain (1),
heavySnowfall (2),
softHail (3)
} (0..255)
```
### <a name="AdverseWeatherCondition-VisibilitySubCauseCode"></a>AdverseWeatherCondition-VisibilitySubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-Visibility`.
- 0 - `unavailable` - in case information on the cause of low visibility is unavailable,
- 1 - `fog` - in case the cause of low visibility is fog,
- 2 - `smoke` - in case the cause of low visibility is smoke,
- 3 - `heavySnowfall` - in case the cause of low visibility is heavy snow fall,
- 4 - `heavyRain` - in case the cause of low visibility is heavy rain,
- 5 - `heavyHail` - in case the cause of low visibility is heavy hail,
- 6 - `lowSunGlare` - in case the cause of low visibility is sun glare,
- 7 - `sandstorms` - in case the cause of low visibility is sand storm,
- 8 - `swarmsOfInsects`- in case the cause of low visibility is swarm of insects.
* **unavailable** (0)<br>
* **fog** (1)<br>
* **smoke** (2)<br>
* **heavySnowfall** (3)<br>
* **heavyRain** (4)<br>
* **heavyHail** (5)<br>
* **lowSunGlare** (6)<br>
* **sandstorms** (7)<br>
* **swarmsOfInsects** (8)<br>
**Categories:** Traffic information
```asn1
AdverseWeatherCondition-VisibilitySubCauseCode ::= INTEGER {
unavailable (0),
fog (1),
smoke (2),
heavySnowfall (3),
heavyRain (4),
heavyHail (5),
lowSunGlare (6),
sandstorms (7),
swarmsOfInsects (8)
} (0..255)
```
### <a name="AirHumidity"></a>AirHumidity
This DE represents the air humidity in tenths of percent.
- `n` (`n > 0` and `n < 1001`) indicates that the applicable value is equal to or less than n x 0,1 percent and greater than (n-1) x 0,1 percent.
- `1001` indicates that the air humidity is unavailable.
* **oneHundredPercent** (1000)<br>
* **unavailable** (1001)<br>
**Categories:** Basic information
**Revision:** _created in V2.1.1_
} (1..1001)
```
### <a name="AltitudeConfidence"></a>AltitudeConfidence
This DE indicates the altitude confidence value which represents the estimated absolute accuracy of an altitude value of a geographical point with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- 0 - `alt-000-01` - if the confidence value is equal to or less than 0,01 metre,
- 1 - `alt-000-02` - if the confidence value is equal to or less than 0,02 metre and greater than 0,01 metre,
- 2 - `alt-000-05` - if the confidence value is equal to or less than 0,05 metre and greater than 0,02 metre,
- 3 - `alt-000-10` - if the confidence value is equal to or less than 0,1 metre and greater than 0,05 metre,
- 4 - `alt-000-20` - if the confidence value is equal to or less than 0,2 metre and greater than 0,1 metre,
- 5 - `alt-000-50` - if the confidence value is equal to or less than 0,5 metre and greater than 0,2 metre,
- 6 - `alt-001-00` - if the confidence value is equal to or less than 1 metre and greater than 0,5 metre,
- 7 - `alt-002-00` - if the confidence value is equal to or less than 2 metres and greater than 1 metre,
- 8 - `alt-005-00` - if the confidence value is equal to or less than 5 metres and greater than 2 metres,
- 9 - `alt-010-00` - if the confidence value is equal to or less than 10 metres and greater than 5 metres,
- 10 - `alt-020-00` - if the confidence value is equal to or less than 20 metres and greater than 10 metres,
- 11 - `alt-050-00` - if the confidence value is equal to or less than 50 metres and greater than 20 metres,
- 12 - `alt-100-00` - if the confidence value is equal to or less than 100 metres and greater than 50 metres,
- 13 - `alt-200-00` - if the confidence value is equal to or less than 200 metres and greater than 100 metres,
- 14 - `outOfRange` - if the confidence value is out of range, i.e. greater than 200 metres,
- 15 - `unavailable` - if the confidence value is unavailable.
* **alt-000-01** (0)<br>
* **alt-000-02** (1)<br>
* **alt-000-05** (2)<br>
* **alt-000-10** (3)<br>
* **alt-000-20** (4)<br>
* **alt-000-50** (5)<br>
* **alt-001-00** (6)<br>
* **alt-002-00** (7)<br>
* **alt-005-00** (8)<br>
* **alt-010-00** (9)<br>
* **alt-020-00** (10)<br>
* **alt-050-00** (11)<br>
* **alt-100-00** (12)<br>
* **alt-200-00** (13)<br>
* **outOfRange** (14)<br>
* **unavailable** (15)<br>
**Categories:** GeoReference information
**Revision:** _Description revised in V2.1.1_
NOTE: If an altitude value is received and its confidence value is set to `outOfRange(14)`, it means that the
altitude value is not valid and therefore cannot be trusted. Such value is not useful for the application.
>>>
```asn1
AltitudeConfidence ::= ENUMERATED {
alt-000-01 (0),
alt-000-02 (1),
alt-000-05 (2),
alt-000-10 (3),
alt-000-20 (4),
alt-000-50 (5),
alt-001-00 (6),
alt-002-00 (7),
alt-005-00 (8),
alt-010-00 (9),
alt-020-00 (10),
alt-050-00 (11),
alt-100-00 (12),
alt-200-00 (13),
outOfRange (14),
unavailable (15)
}
```
### <a name="AltitudeValue"></a>AltitudeValue
This DE represents the altitude value in a WGS84 coordinate system.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
- `-100 000` if the altitude is equal to or less than -1 000 m,
- `n` (`n > -100 000` and `n < 800 000`) if the altitude is equal to or less than n x 0,01 metre and greater than (n-1) x 0,01 metre,
- `800 000` if the altitude greater than 7 999,99 m,
- `800 001` if the information is not available.
* **negativeOutOfRange** (-100000)<br>
* **postiveOutOfRange** (800000)<br>
* **unavailable** (800001)<br>
**Categories:** GeoReference information
**Revision:** _Description revised in V2.1.1 (definition of 800 000 has slightly changed)_
NOTE: the range of this DE does not use the full binary encoding range, but all reasonable values are covered. In order to cover all possible altitude ranges a larger encoding would be necessary.
postiveOutOfRange (800000),
unavailable (800001)
} (-100000..800001)
```
### <a name="AngleConfidence"></a>AngleConfidence
This DE indicates the angle confidence value which represents the estimated absolute accuracy of an angle value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 126`) if the accuracy is equal to or less than n * 0,1 degrees and greater than (n-1) x * 0,1 degrees,
- `126` if the accuracy is out of range, i.e. greater than 12,5 degrees,
- `127` if the accuracy information is not available.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
AngleConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="AngularSpeedConfidence"></a>AngularSpeedConfidence
This DE indicates the angular speed confidence value which represents the estimated absolute accuracy of an angular speed value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
For correlation computation, maximum interval levels can be assumed.
The value shall be set to:
- 0 - `degSec-01` - if the accuracy is equal to or less than 1 degree/second,
- 1 - `degSec-02` - if the accuracy is equal to or less than 2 degrees/second and greater than 1 degree/second,
- 2 - `degSec-05` - if the accuracy is equal to or less than 5 degrees/second and greater than 2 degrees/second,
- 3 - `degSec-10` - if the accuracy is equal to or less than 10 degrees/second and greater than 5 degrees/second,
- 4 - `degSec-20` - if the accuracy is equal to or less than 20 degrees/second and greater than 10 degrees/second,
- 5 - `degSec-50` - if the accuracy is equal to or less than 50 degrees/second and greater than 20 degrees/second,
- 6 - `outOfRange` - if the accuracy is out of range, i.e. greater than 50 degrees/second,
- 7 - `unavailable` - if the accuracy information is unavailable.
* **degSec-01** (0)<br>
* **degSec-02** (1)<br>
* **degSec-05** (2)<br>
* **degSec-10** (3)<br>
* **degSec-20** (4)<br>
* **degSec-50** (5)<br>
* **outOfRange** (6)<br>
* **unavailable** (7)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AngularSpeedConfidence ::= ENUMERATED {
degSec-01 (0),
degSec-02 (1),
degSec-05 (2),
degSec-10 (3),
degSec-20 (4),
degSec-50 (5),
}
```
### <a name="AngularAccelerationConfidence"></a>AngularAccelerationConfidence
This DE indicates the angular acceleration confidence value which represents the estimated accuracy of an angular acceleration value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
For correlation computation, maximum interval levels shall be assumed.
The value shall be set to:
- 0 - `degSecSquared-01` - if the accuracy is equal to or less than 1 degree/second<sup>2</sup>,
- 1 - `degSecSquared-02` - if the accuracy is equal to or less than 2 degrees/second<sup>2</sup> and greater than 1 degree/second<sup>2</sup>,
- 2 - `degSecSquared-05` - if the accuracy is equal to or less than 5 degrees/second<sup>2</sup> and greater than 1 degree/second<sup>2</sup>,
- 3 - `degSecSquared-10` - if the accuracy is equal to or less than 10 degrees/second<sup>2</sup> and greater than 5 degrees/second<sup>2</sup>,
- 4 - `degSecSquared-20` - if the accuracy is equal to or less than 20 degrees/second<sup>2</sup> and greater than 10 degrees/second<sup>2</sup>,
- 5 - `degSecSquared-50` - if the accuracy is equal to or less than 50 degrees/second<sup>2</sup> and greater than 20 degrees/second<sup>2</sup>,
- 6 - `outOfRange` - if the accuracy is out of range, i.e. greater than 50 degrees/second<sup>2</sup>,
- 7 - `unavailable` - if the accuracy information is unavailable.
* **degSecSquared-01** (0)<br>
* **degSecSquared-02** (1)<br>
* **degSecSquared-05** (2)<br>
* **degSecSquared-10** (3)<br>
* **degSecSquared-20** (4)<br>
* **degSecSquared-50** (5)<br>
* **outOfRange** (6)<br>
* **unavailable** (7)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AngularAccelerationConfidence ::= ENUMERATED {
degSecSquared-01 (0),
degSecSquared-02 (1),
degSecSquared-05 (2),
degSecSquared-10 (3),
degSecSquared-20 (4),
degSecSquared-50 (5),
outOfRange (6),
unavailable (7)
}
```
### <a name="AxlesCount"></a>AxlesCount
This DE indicates the number of axles of a passing train.
- `n` (`n > 2` and `n < 1001`) indicates that the train has n x axles,
- `1001`indicates that the number of axles is out of range,
- `1002` the information is unavailable.
* **outOfRange** (1001)<br>
* **unavailable** (1002)<br>
**Unit:** _Number of axles_
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
} (2..1002)
```
### <a name="BarometricPressure"></a>BarometricPressure
This DE represents the measured uncompensated atmospheric pressure.
- `2999` indicates that the applicable value is less than 29990 Pa,
- `n` (`n > 2999` and `n ≤ 12000`) indicates that the applicable value is equal to or less than n x 10 Pa and greater than (n-1) x 10 Pa,
- `12001` indicates that the values is greater than 120000 Pa,
- `12002` indicates that the information is not available.
* **outOfRangelower** (2999)<br>
* **outOfRangeUpper** (12001)<br>
* **unavailable** (12002)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
BarometricPressure ::= INTEGER{
outOfRangelower (2999),
outOfRangeUpper (12001),
unavailable (12002)
} (2999..12002)
```
### <a name="BogiesCount"></a>BogiesCount
This DE indicates the cardinal number of bogies of a train.
- `n` (`n > 1` and `n < 100`) indicates that the train has n x bogies,
- `100`indicates that the number of bogies is out of range,
- `101` the information is unavailable.
* **outOfRange** (100)<br>
* **unavailable** (101)<br>
**Unit:** _Number of bogies_
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
```asn1
BogiesCount ::= INTEGER{
outOfRange (100),
unavailable (101)
} (2..101)
```
### <a name="CardinalNumber1B"></a>CardinalNumber1B
The DE represents a cardinal number that counts the size of a set.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
### <a name="CardinalNumber3b"></a>CardinalNumber3b
The DE represents a cardinal number that counts the size of a set.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
### <a name="CartesianAngleValue"></a>CartesianAngleValue
This DE represents an angle value described in a local Cartesian coordinate system, per default counted positive in
a right-hand local coordinate system from the abscissa.
The value shall be set to:
- `n` (`n ≥ 0` and `n < 3600`) if the angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees,
* **valueNotUsed** (3600)<br>
* **unavailable** (3601)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1, description and value for 3601 corrected in V2.2.1_
```asn1
CartesianAngleValue ::= INTEGER {
valueNotUsed (3600),
unavailable (3601)
} (0..3601)
```
### <a name="CartesianAngularAccelerationComponentValue"></a>CartesianAngularAccelerationComponentValue
This DE represents an angular acceleration value described in a local Cartesian coordinate system, per default counted positive in
a right-hand local coordinate system from the abscissa.
The value shall be set to:
- `-255` if the acceleration is equal to or less than -255 degrees/s<sup>2</sup>,
- `n` (`n > -255` and `n < 255`) if the acceleration is equal to or less than n x 1 degree/s<sup>2</sup>,
and greater than `(n-1)` x 0,01 degree/s<sup>2</sup>,
- `255` if the acceleration is greater than 254 degrees/s<sup>2</sup>,
- `256` if the information is unavailable.
* **negativeOutOfRange** (-255)<br>
* **positiveOutOfRange** (255)<br>
* **unavailable** (256)<br>
**Unit:** _degree/s<sup>2</sup> (degrees per second squared)_
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
CartesianAngularAccelerationComponentValue ::= INTEGER {
positiveOutOfRange (255),
unavailable (256)
} (-255..256)
### <a name="CartesianAngularVelocityComponentValue"></a>CartesianAngularVelocityComponentValue
This DE represents an angular velocity component described in a local Cartesian coordinate system, per default counted positive in
a right-hand local coordinate system from the abscissa.
The value shall be set to:
- `-255` if the velocity is equal to or less than -255 degrees/s,
- `n` (`n > -255` and `n < 255`) if the velocity is equal to or less than n x 1 degree/s, and greater than (n-1) x 1 degree/s,
- `255` if the velocity is greater than 254 degrees/s,
- `256` if the information is unavailable.
* **negativeOutofRange** (-255)<br>
* **positiveOutOfRange** (255)<br>
* **unavailable** (256)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
CartesianAngularVelocityComponentValue ::= INTEGER {
negativeOutofRange (-255),
positiveOutOfRange (255),
unavailable (256)
} (-255..256)
```
### <a name="CauseCodeType"></a>CauseCodeType
The DE represents the value of the cause code of an event.
The value shall be set to:
- 1 - `trafficCondition` - in case the type of event is an abnormal traffic condition,
- 2 - `accident` - in case the type of event is a road accident,
- 3 - `roadworks` - in case the type of event is roadwork,
- 5 - `impassability` - in case the type of event is unmanaged road blocking, referring to any
blocking of a road, partial or total, which has not been adequately
secured and signposted,
- 6 - `adverseWeatherCondition-Adhesion` - in case the type of event is low adhesion,
- 7 - `aquaplaning` - danger of aquaplaning on the road,
- 9 - `hazardousLocation-SurfaceCondition` - in case the type of event is abnormal road surface condition,
- 10 - `hazardousLocation-ObstacleOnTheRoad` - in case the type of event is obstacle on the road,
- 11 - `hazardousLocation-AnimalOnTheRoad` - in case the type of event is animal on the road,
- 12 - `humanPresenceOnTheRoad` - in case the type of event is presence of human vulnerable road user on the road,
- 14 - `wrongWayDriving` - in case the type of the event is vehicle driving in wrong way,
- 15 - `rescueAndRecoveryWorkInProgress` - in case the type of event is rescue and recovery work for accident or for a road hazard in progress,
- 17 - `adverseWeatherCondition-ExtremeWeatherCondition`- in case the type of event is extreme weather condition,
- 18 - `adverseWeatherCondition-Visibility` - in case the type of event is low visibility,
- 19 - `adverseWeatherCondition-Precipitation` - in case the type of event is precipitation,
- 20 - `violence` - in case the the type of event is human violence on or near the road,
- 26 - `slowVehicle` - in case the type of event is slow vehicle driving on the road,
- 27 - `dangerousEndOfQueue` - in case the type of event is dangerous end of vehicle queue,
- 28 - `publicTransportVehicleApproaching - in case the type of event is a public transport vehicle approaching, with a priority defined by applicable traffic regulations,
- 29-90 - are reserved for future usage,
- 91 - `vehicleBreakdown` - in case the type of event is break down vehicle on the road,
- 92 - `postCrash` - in case the type of event is a detected crash,
- 93 - `humanProblem` - in case the type of event is human health problem in vehicles involved in traffic,
- 94 - `stationaryVehicle` - in case the type of event is stationary vehicle,
- 95 - `emergencyVehicleApproaching` - in case the type of event is an approaching vehicle operating on a mission for which the applicable
traffic regulations provide it with defined priority rights in traffic.
- 96 - `hazardousLocation-DangerousCurve` - in case the type of event is dangerous curve,
- 97 - `collisionRisk` - in case the type of event is a collision risk,
- 98 - `signalViolation` - in case the type of event is signal violation,
- 99 - `dangerousSituation` - in case the type of event is dangerous situation in which autonomous safety system in vehicle
- 100 - `railwayLevelCrossing` - in case the type of event is a railway level crossing.
* **trafficCondition** (1)<br>
* **accident** (2)<br>
* **roadworks** (3)<br>
* **impassability** (5)<br>
* **adverseWeatherCondition-Adhesion** (6)<br>
* **aquaplaning** (7)<br>
* **hazardousLocation-SurfaceCondition** (9)<br>
* **hazardousLocation-ObstacleOnTheRoad** (10)<br>
* **hazardousLocation-AnimalOnTheRoad** (11)<br>
* **humanPresenceOnTheRoad** (12)<br>
* **wrongWayDriving** (14)<br>
* **rescueAndRecoveryWorkInProgress** (15)<br>
* **adverseWeatherCondition-ExtremeWeatherCondition** (17)<br>
* **adverseWeatherCondition-Visibility** (18)<br>
* **adverseWeatherCondition-Precipitation** (19)<br>
* **violence** (20)<br>
* **slowVehicle** (26)<br>
* **dangerousEndOfQueue** (27)<br>
* **vehicleBreakdown** (91)<br>
* **postCrash** (92)<br>
* **humanProblem** (93)<br>
* **stationaryVehicle** (94)<br>
* **emergencyVehicleApproaching** (95)<br>
* **hazardousLocation-DangerousCurve** (96)<br>
* **collisionRisk** (97)<br>
* **signalViolation** (98)<br>
* **dangerousSituation** (99)<br>
* **railwayLevelCrossing** (100)<br>
**Categories:** Traffic information
**Revision:** _V1.3.1, value 28 added in V2.2.1, definition of values 12 and 95 changed in V2.2.1_
```asn1
CauseCodeType ::= INTEGER {
trafficCondition (1),
accident (2),
roadworks (3),
impassability (5),
adverseWeatherCondition-Adhesion (6),
aquaplaning (7),
hazardousLocation-SurfaceCondition (9),
hazardousLocation-ObstacleOnTheRoad (10),
hazardousLocation-AnimalOnTheRoad (11),
humanPresenceOnTheRoad (12),
wrongWayDriving (14),
rescueAndRecoveryWorkInProgress (15),
adverseWeatherCondition-ExtremeWeatherCondition (17),
adverseWeatherCondition-Visibility (18),
adverseWeatherCondition-Precipitation (19),
violence (20),
slowVehicle (26),
dangerousEndOfQueue (27),
vehicleBreakdown (91),
postCrash (92),
humanProblem (93),
stationaryVehicle (94),
emergencyVehicleApproaching (95),
hazardousLocation-DangerousCurve (96),
collisionRisk (97),
signalViolation (98),
dangerousSituation (99),
railwayLevelCrossing (100)
} (0..255)
```
### <a name="CartesianCoordinateSmall"></a>CartesianCoordinateSmall
This DF represents the value of a cartesian coordinate with a range of -30,94 metres to +10,00 metres.
- `3094` if the longitudinal offset is out of range, i.e. less than or equal to -30,94 metres,
- `n` (`n > -3 094` and `n < 1 001`) if the longitudinal offset information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,
- `1001` if the longitudinal offset is out of range, i.e. greater than 10 metres.
* **negativeOutOfRange** (-3094)<br>
* **positiveOutOfRange** (1001)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
CartesianCoordinateSmall::= INTEGER {
negativeOutOfRange (-3094),
positiveOutOfRange (1001)
```
### <a name="CartesianCoordinate"></a>CartesianCoordinate
This DF represents the value of a cartesian coordinate with a range of -327,68 metres to +327,66 metres.
- `-32 768` if the longitudinal offset is out of range, i.e. less than or equal to -327,68 metres,
- `n` (`n > -32 768` and `n < 32 767`) if the longitudinal offset information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,
- `32 767` if the longitudinal offset is out of range, i.e. greater than + 327,66 metres.
* **negativeOutOfRange** (-32768)<br>
* **positiveOutOfRange** (32767)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
CartesianCoordinate::= INTEGER{
negativeOutOfRange (-32768),
positiveOutOfRange (32767)
} (-32768..32767)
```
### <a name="CartesianCoordinateLarge"></a>CartesianCoordinateLarge
This DF represents the value of a cartesian coordinate with a range of -1 310,72 metres to +1 310,70 metres.
- `-131072` if the longitudinal offset is out of range, i.e. less than or equal to -1 310,72 metres,
- `n` (`n > 131 072` and `n < 131 071`) if the longitudinal offset information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,
- `131 071` if the longitudinal offset is out of range, i.e. greater than + 1 310,70 metres.
* **negativeOutOfRange** (-131072)<br>
* **positiveOutOfRange** (131071)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
CartesianCoordinateLarge::= INTEGER{
negativeOutOfRange (-131072),
positiveOutOfRange (131071)
} (-131072..131071)
```
### <a name="CenDsrcTollingZoneID"></a>CenDsrcTollingZoneID
This DE represents the ID of a CEN DSRC tolling zone.
**Categories:** Communication information
NOTE: this DE is deprecated and shall not be used anymore.
```
### <a name="ClusterBreakupReason"></a>ClusterBreakupReason
This DE indicates the reason why a cluster leader intends to break up the cluster.
- 0 - `notProvided` - if the information is not provided,
- 1 - `clusteringPurposeCompleted` - if the cluster purpose has been completed,
- 2 - `leaderMovedOutOfClusterBoundingBox` - if the leader moved out of the cluster's bounding box,
- 3 - `joiningAnotherCluster` - if the cluster leader is about to join another cluster,
- 4 - `enteringLowRiskAreaBasedOnMaps` - if the cluster is entering an area idenrified as low risk based on the use of maps,
- 5 - `receptionOfCpmContainingCluster` - if the leader received a Collective Perception Message containing information about the same cluster.
* **notProvided** (0)<br>
* **clusteringPurposeCompleted** (1)<br>
* **leaderMovedOutOfClusterBoundingBox** (2)<br>
* **joiningAnotherCluster** (3)<br>
* **enteringLowRiskAreaBasedOnMaps** (4)<br>
* **receptionOfCpmContainingCluster** (5)<br>
**Categories:** Cluster information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1_
notProvided (0),
clusteringPurposeCompleted (1),
leaderMovedOutOfClusterBoundingBox (2),
joiningAnotherCluster (3),
enteringLowRiskAreaBasedOnMaps (4),
```
### <a name="ClusterLeaveReason"></a>ClusterLeaveReason
This DE indicates the reason why a cluster participant is leaving the cluster.
- 0 - `notProvided ` - if the information is not provided,
- 1 - `clusterLeaderLost` - if the cluster leader cannot be found anymore,
- 2 - `clusterDisbandedByLeader` - if the cluster has been disbanded by the leader,
- 3 - `outOfClusterBoundingBox` - if the participants moved out of the cluster's bounding box,
- 4 - `outOfClusterSpeedRange` - if the cluster speed moved out of a defined range,
- 5 - `joiningAnotherCluster` - if the participant is joining another cluster,
- 6 - `cancelledJoin` - if the participant is cancelling a joining procedure,
- 7 - `failedJoin` - if the participant failed to join the cluster,
- 8 - `safetyCondition` - if a safety condition applies.
* **notProvided** (0)<br>
* **clusterLeaderLost** (1)<br>
* **clusterDisbandedByLeader** (2)<br>
* **outOfClusterBoundingBox** (3)<br>
* **outOfClusterSpeedRange** (4)<br>
* **joiningAnotherCluster** (5)<br>
* **cancelledJoin** (6)<br>
* **failedJoin** (7)<br>
* **safetyCondition** (8)<br>
**Categories:** Cluster information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1_
notProvided (0),
clusterLeaderLost (1),
clusterDisbandedByLeader (2),
outOfClusterBoundingBox (3),
outOfClusterSpeedRange (4),
joiningAnotherCluster (5),
cancelledJoin (6),
failedJoin (7),
```
### <a name="CollisionRiskSubCauseCode"></a>CollisionRiskSubCauseCode
This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) `collisionRisk`.
- 0 - `unavailable` - in case information on the type of collision risk is unavailable,
- 1 - `longitudinalCollisionRisk` - in case the type of detected collision risk is longitudinal collision risk,
e.g. forward collision or face to face collision,
- 2 - `crossingCollisionRisk` - in case the type of detected collision risk is crossing collision risk,
- 3 - `lateralCollisionRisk` - in case the type of detected collision risk is lateral collision risk,
- 4 - `vulnerableRoadUser` - in case the type of detected collision risk involves vulnerable road users
e.g. pedestrians or bicycles.
- 5 - `collisionRiskWithPedestrian` - in case the type of detected collision risk involves at least one pedestrian,
- 6 - `collisionRiskWithCyclist` - in case the type of detected collision risk involves at least one cyclist (and no pedestrians),
- 7 - `collisionRiskWithMotorVehicle` - in case the type of detected collision risk involves at least one motor vehicle (and no pedestrians or cyclists),
- 8-255 - are reserved for future usage.
* **unavailable** (0)<br>
* **longitudinalCollisionRisk** (1)<br>
* **crossingCollisionRisk** (2)<br>
* **lateralCollisionRisk** (3)<br>
* **vulnerableRoadUser** (4)<br>
* **collisionRiskWithPedestrian** (5)<br>
* **collisionRiskWithCyclist** (6)<br>
* **collisionRiskWithMotorVehicle** (7)<br>
**Categories:** Traffic information
**Revision:** _V1.3.1, values 5-7 assigned in V2.2.1_
```asn1
CollisionRiskSubCauseCode ::= INTEGER {
unavailable (0),
longitudinalCollisionRisk (1),
crossingCollisionRisk (2),
lateralCollisionRisk (3),
vulnerableRoadUser (4),
collisionRiskWithPedestrian (5),
collisionRiskWithCyclist (6),
collisionRiskWithMotorVehicle (7)
}(0..255)
```
### <a name="ConfidenceLevel"></a>ConfidenceLevel
This DE represents a confidence level in percentage.
- `n` (`n > 0` and `n < 101`) : for the confidence level in %,
- `101` : in case the confidence level is not available.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
ConfidenceLevel ::= INTEGER {
unavailable (101)
```
### <a name="CoordinateConfidence"></a>CoordinateConfidence
This DE indicates the coordinate confidence value which represents the estimated absolute accuracy of a position coordinate with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 4095`) if the confidence value is is equal to or less than n x 0,01 metre, and greater than (n-1) x 0,01 metre,
- `4095` if the confidence value is greater than 40,94 metres,
- `4096` if the confidence value is not available.
* **outOfRange** (4095)<br>
* **unavailable** (4096)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
outOfRange (4095),
unavailable (4096)
} (1..4096)
### <a name="CorrelationCellValue"></a>CorrelationCellValue
This DE represents the Bravais-Pearson correlation value for each cell of a lower triangular correlation matrix.
- `-100` in case of full negative correlation,
- `n` (`n > -100` and `n < 0`) if the correlation is negative and equal to n x 100,
- `0` in case of no correlation,
- `n` (`n > 0` and `n < 100`) if the correlation is positive and equal to n x 100,
- `100` in case of full positive correlation,
- `101` in case the correlation information is unavailable.
* **full-negative-correlation** (-100)<br>
* **no-correlation** (0)<br>
* **full-positive-correlation** (100)<br>
* **unavailable** (101)<br>
**Unit:** _the value is scaled by 100_
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
full-negative-correlation (-100),
no-correlation (0),
full-positive-correlation (100),
unavailable (101)
} (-100..101)
This DE represents an ISO 3166-1 [[25]](#references) country code encoded using ITA-2 encoding.
**Categories:** Basic information
**Revision:** _Created in V2.2.1 based on ISO 14816 [[23]](#references)_
```asn1
CountryCode ::= BIT STRING(SIZE(10))
```
### <a name="CurvatureCalculationMode"></a>CurvatureCalculationMode
The DE describes whether the yaw rate is used to calculate the curvature for a curvature value.
- 0 - `yawRateUsed` - if the yaw rate is used,
- 1 - `yawRateNotUsed` - if the yaw rate is not used,
- 2 - `unavailable` - if the information of curvature calculation mode is unknown.
* **yawRateUsed** (0)<br>
* **yawRateNotUsed** (1)<br>
* **unavailable** (2)<br>
**Categories:** Vehicle information
```asn1
CurvatureCalculationMode ::= ENUMERATED {
yawRateUsed (0),
yawRateNotUsed (1),
unavailable (2),
...
}
```
### <a name="CurvatureConfidence"></a>CurvatureConfidence
This DE indicates the acceleration confidence value which represents the estimated absolute accuracy range of a curvature value with a confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- 0 - `onePerMeter-0-00002` - if the confidence value is less than or equal to 0,00002 m-1,
- 1 - `onePerMeter-0-0001` - if the confidence value is less than or equal to 0,0001 m-1 and greater than 0,00002 m-1,
- 2 - `onePerMeter-0-0005` - if the confidence value is less than or equal to 0,0005 m-1 and greater than 0,0001 m-1,
- 3 - `onePerMeter-0-002` - if the confidence value is less than or equal to 0,002 m-1 and greater than 0,0005 m-1,
- 4 - `nePerMeter-0-01` - if the confidence value is less than or equal to 0,01 m-1 and greater than 0,002 m-1,
- 5 - `nePerMeter-0-1` - if the confidence value is less than or equal to 0,1 m-1 and greater than 0,01 m-1,
- 6 - `outOfRange` - if the confidence value is out of range, i.e. greater than 0,1 m-1,
- 7 - `unavailable` - if the confidence value is not available.
* **onePerMeter-0-00002** (0)<br>
* **onePerMeter-0-0001** (1)<br>
* **onePerMeter-0-0005** (2)<br>
* **onePerMeter-0-002** (3)<br>
* **onePerMeter-0-01** (4)<br>
* **onePerMeter-0-1** (5)<br>
* **outOfRange** (6)<br>
* **unavailable** (7)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: If a curvature value is received and its confidence value is set to `outOfRange(6)`, it means that the curvature value is not valid
and therefore cannot be trusted. Such value is not useful for the application.
>>>
```asn1
CurvatureConfidence ::= ENUMERATED {
onePerMeter-0-00002 (0),
onePerMeter-0-0001 (1),
onePerMeter-0-0005 (2),
onePerMeter-0-002 (3),
onePerMeter-0-01 (4),
onePerMeter-0-1 (5),
outOfRange (6),
unavailable (7)
}
```
### <a name="CurvatureValue"></a>CurvatureValue
This DE describes vehicle turning curve with the following information:
wherein radius is the vehicle turning curve radius in metres.
Positive values indicate a turning curve to the left hand side of the driver.
It corresponds to the vehicle coordinate system as defined in ISO 8855 [[21]](#references).
- `-1023` for values smaller than -1023,
- `n` (`n > -1023` and `n < 0`) for negative values equal to or less than `n`, and greater than `(n-1)`,
- `0` when the vehicle is moving straight,
- `n` (`n > 0` and `n < 1022`) for positive values equal to or less than `n`, and greater than `(n-1)`,
- `1022`, for values greater than 1021,
- `1023`, if the information is not available.
* **outOfRangeNegative** (-1023)<br>
* **straight** (0)<br>
* **outOfRangePositive** (1022)<br>
* **unavailable** (1023)<br>
**Unit:** _1 over 10 000 metres_
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the definition of value 1022 has changed slightly)_
NOTE: The present DE is limited to vehicle types as defined in ISO 8855 [[21]](#references).
```asn1
CurvatureValue ::= INTEGER {
outOfRangeNegative (-1023),
straight (0),
outOfRangePositive (1022),
unavailable (1023)
} (-1023..1023)
```
### <a name="DangerousEndOfQueueSubCauseCode"></a>DangerousEndOfQueueSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `dangerousEndOfQueue`.
- 0 - `unavailable` - in case information on the type of dangerous queue is unavailable,
- 1 - `suddenEndOfQueue`- in case a sudden end of queue is detected, e.g. due to accident or obstacle,
- 2 - `queueOverHill` - in case the dangerous end of queue is detected on the road hill,
- 3 - `queueAroundBend` - in case the dangerous end of queue is detected around the road bend,
- 4 - `queueInTunnel` - in case queue is detected in tunnel,
* **unavailable** (0)<br>
* **suddenEndOfQueue** (1)<br>
* **queueOverHill** (2)<br>
* **queueAroundBend** (3)<br>
* **queueInTunnel** (4)<br>
**Categories:** Traffic information
```asn1
DangerousEndOfQueueSubCauseCode ::= INTEGER {
unavailable (0),
suddenEndOfQueue (1),
queueOverHill (2),
queueAroundBend (3),
queueInTunnel (4)
} (0..255)
```
### <a name="DangerousGoodsBasic"></a>DangerousGoodsBasic
This DE indicates the type of the dangerous goods being carried by a heavy vehicle.
The value is assigned according to `class` and `division` definitions of dangerous goods as specified in part II,
chapter 2.1.1.1 of European Agreement concerning the International Carriage of Dangerous Goods by Road [[3]](#references).
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
* **explosives1** (0)<br>
* **explosives2** (1)<br>
* **explosives3** (2)<br>
* **explosives4** (3)<br>
* **explosives5** (4)<br>
* **explosives6** (5)<br>
* **flammableGases** (6)<br>
* **nonFlammableGases** (7)<br>
* **toxicGases** (8)<br>
* **flammableLiquids** (9)<br>
* **flammableSolids** (10)<br>
* **substancesLiableToSpontaneousCombustion** (11)<br>
* **substancesEmittingFlammableGasesUponContactWithWater** (12)<br>
* **oxidizingSubstances** (13)<br>
* **organicPeroxides** (14)<br>
* **toxicSubstances** (15)<br>
* **infectiousSubstances** (16)<br>
* **radioactiveMaterial** (17)<br>
* **corrosiveSubstances** (18)<br>
* **miscellaneousDangerousSubstances** (19)<br>
**Categories:** Vehicle information
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
```asn1
DangerousGoodsBasic::= ENUMERATED {
explosives1 (0),
explosives2 (1),
explosives3 (2),
explosives4 (3),
explosives5 (4),
explosives6 (5),
flammableGases (6),
nonFlammableGases (7),
toxicGases (8),
flammableLiquids (9),
flammableSolids (10),
substancesLiableToSpontaneousCombustion (11),
substancesEmittingFlammableGasesUponContactWithWater (12),
oxidizingSubstances (13),
organicPeroxides (14),
toxicSubstances (15),
infectiousSubstances (16),
radioactiveMaterial (17),
corrosiveSubstances (18),
miscellaneousDangerousSubstances (19)
}
```
### <a name="DangerousSituationSubCauseCode"></a>DangerousSituationSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `dangerousSituation`
- 0 - `unavailable` - in case information on the type of dangerous situation is unavailable,
- 1 - `emergencyElectronicBrakeEngaged` - in case emergency electronic brake is engaged,
- 2 - `preCrashSystemEngaged` - in case pre-crash system is engaged,
- 3 - `espEngaged` - in case Electronic Stability Program (ESP) system is engaged,
- 4 - `absEngaged` - in case Anti-lock Braking System (ABS) is engaged,
- 5 - `aebEngaged` - in case Autonomous Emergency Braking (AEB) system is engaged,
- 6 - `brakeWarningEngaged` - in case brake warning is engaged,
- 7 - `collisionRiskWarningEngaged` - in case collision risk warning is engaged,
* **unavailable** (0)<br>
* **emergencyElectronicBrakeEngaged** (1)<br>
* **preCrashSystemEngaged** (2)<br>
* **espEngaged** (3)<br>
* **absEngaged** (4)<br>
* **ebEngaged** (5)<br>
* **brakeWarningEngaged** (6)<br>
* **collisionRiskWarningEngaged** (7)<br>
**Categories:** Traffic information
```asn1
DangerousSituationSubCauseCode ::= INTEGER {
unavailable (0),
emergencyElectronicBrakeEngaged (1),
preCrashSystemEngaged (2),
espEngaged (3),
absEngaged (4),
ebEngaged (5),
brakeWarningEngaged (6),
collisionRiskWarningEngaged (7)
} (0..255)
```
### <a name="DeltaAltitude"></a>DeltaAltitude
This DE represents an offset altitude with regards to a defined altitude value.
It may be used to describe a geographical point with regards to a specific reference geographical position.
The value shall be set to:
- `-12 700` for values equal to or lower than -127 metres,
- `n` (`n > -12 700` and `n ≤ 0`) for altitude offset n x 0,01 metre below the reference position,
- `0` for no altitudinal offset,
- `n` (`n > 0` and `n < 12799`) for altitude offset n x 0,01 metre above the reference position,
- `12 799` for values equal to or greater than 127,99 metres,
- `12 800` when the information is unavailable.
* **negativeOutOfRange** (-12700)<br>
* **positiveOutOfRange** (12799)<br>
* **unavailable** (12800)<br>
**Categories:** GeoReference information
**Revision:** _editorial update in V2.1.1_
```asn1
DeltaAltitude ::= INTEGER {
negativeOutOfRange (-12700),
positiveOutOfRange (12799),
unavailable (12800)
} (-12700..12800)
```
### <a name="DeltaLatitude"></a>DeltaLatitude
This DE represents an offset latitude with regards to a defined latitude value.
It may be used to describe a geographical point with regards to a specific reference geographical position.
The value shall be set to:
- `n` (`n ≥ -131 071` and `n < 0`) for offset n x 10<sup>-7</sup> degree towards the south from the reference position,
- `0` for no latitudinal offset,
- `n` (`n > 0` and `n < 131 072`) for offset n x 10<sup>-7</sup> degree towards the north from the reference position,
- `131 072` when the information is unavailable.
**Unit:** _10<sup>-7</sup> degree_
**Categories:** GeoReference information
**Revision:** _editorial update in V2.1.1_
```asn1
DeltaLatitude ::= INTEGER {
unavailable (131072)
} (-131071..131072)
```
### <a name="DeltaLongitude"></a>DeltaLongitude
This DE represents an offset longitude with regards to a defined longitude value.
It may be used to describe a geographical point with regards to a specific reference geographical position.
The value shall be set to:
- `n` (`n ≥ -131 071` and `n < 0`) for offset n x 10<sup>-7</sup> degree towards the west from the reference position,
- `0` for no longitudinal offset,
- `n` (`n > 0` and `n < 131 072`) for offset n x 10<sup>-7</sup> degree towards the east from the reference position,
- `131 072` when the information is unavailable.
**Unit:** _10<sup>-7</sup> degree_
**Categories:** GeoReference information
**Revision:** _editorial update in V2.1.1_
```asn1
DeltaLongitude ::= INTEGER {
unavailable (131072)
} (-131071..131072)
```
### <a name="DeltaTimeMilliSecondPositive"></a>DeltaTimeMilliSecondPositive
This DE represents a difference in time with respect to a reference time.
The value shall be set to:
- `n` (`n > 0` and `n < 10001`) to indicate a time value equal to or less than n x 0,001 s, and greater than (n-1) x 0,001 s,
Example: a time interval between two consecutive message transmissions.
**Categories:** Basic information
**Revision:** _Created in V2.1.1 from the DE TransmissionInterval in [[2]](#references)_
DeltaTimeMilliSecondPositive ::= INTEGER (1..10000)
### <a name="DeltaTimeMilliSecondSigned"></a>DeltaTimeMilliSecondSigned
This DE represents a signed difference in time with respect to a reference time.
The value shall be set to:
- `-2048` for time values equal to or less than -2,048 s,
- `n` (`n > -2048` and `n < 2047`) to indicate a time value equal to or less than n x 0,001 s, and greater than (n-1) x 0,001 s,
- `2047` for time values greater than 2,046 s
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
DeltaTimeMilliSecondSigned ::= INTEGER (-2048..2047)
```
### <a name="DeltaTimeQuarterSecond"></a>DeltaTimeQuarterSecond
This DE represents a difference in time with respect to a reference time.
It can be interpreted as the first 8 bits of a GenerationDeltaTime. To convert it to a [**GenerationDeltaTime**](#GenerationDeltaTime),
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
DeltaTimeQuarterSecond::= INTEGER {
unavailable (255)
} (1..255)
```
### <a name="DeltaTimeTenthOfSecond"></a>DeltaTimeTenthOfSecond
This DE represents a difference in time with respect to a reference time.
The value shall be set to:
- `0` for a difference in time of 0 seconds.
- `n` (`n > 0` and `n < 128`) to indicate a time value equal to or less than n x 0,1 s, and greater than (n-1) x 0,1 s,
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
DeltaTimeTenthOfSecond::= INTEGER {
unavailable (127)
} (0..127)
```
### <a name="DeltaTimeSecond"></a>DeltaTimeSecond
This DE represents a difference in time with respect to a reference time.
The value shall be set to:
- `-0` for a difference in time of 0 seconds.
- `n` (`n > 0` and `n ≤ 86400`) to indicate a time value equal to or less than n x 1 s, and greater than (n-1) x 1 s,
**Categories:** Basic information
**Revision:** _Created in V2.1.1 from ValidityDuration_
```asn1
DeltaTimeSecond ::= INTEGER (0..86400)
```
### <a name="DeltaTimeTenSeconds"></a>DeltaTimeTenSeconds
This DE represents a difference in time with respect to a reference time.
The value shall be set to:
- `-0` for a difference in time of 0 seconds.
- `n` (`n > 0` and `n < 128`) to indicate a time value equal to or less than n x 10 s, and greater than (n-1) x 10 s,
**Unit:** _10 s_
**Categories:** Basic information
**Revision:** _Created in V2.2.1_
```asn1
DeltaTimeTenSeconds ::= INTEGER (0..127)
```
This DE indicates a direction with respect to a defined reference direction.
Example: a reference direction may be implicitly defined by the definition of a geographical zone.
The value shall be set to:
- 0 - `sameDirection` - to indicate the same direction as the reference direction,
- 1 - `oppositeDirection` - to indicate opposite direction as the reference direction,
- 2 - `bothDirections` - to indicate both directions, i.e. the same and the opposite direction,
- 3 - `unavailable` - to indicate that the information is unavailable.
* **sameDirection** (0)<br>
* **oppositeDirection** (1)<br>
* **bothDirections** (2)<br>
* **unavailable** (3)<br>
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
```asn1
Direction::= INTEGER{
sameDirection (0),
oppositeDirection (1),
bothDirections (2),
unavailable (3)
} (0..3)
```
### <a name="DriveDirection"></a>DriveDirection
This DE indicates in which direction something is moving.
- 0 - `forward` - to indicate it is moving forward,
- 1 - `backwards` - to indicate it is moving backwards,
- 2 - `unavailable` - to indicate that the information is unavailable.
* **forward** (0)<br>
* **backward** (1)<br>
* **unavailable** (2)<br>
**Categories:** Kinematic information
**Revision:** _editorial update in V2.1.1_
```asn1
DriveDirection ::= ENUMERATED {
forward (0),
backward (1),
unavailable (2)
}
```
### <a name="DrivingLaneStatus"></a>DrivingLaneStatus
This DE indicates whether a driving lane is open to traffic.
A lane is counted from inside border of the road excluding the hard shoulder. The size of the bit string shall
correspond to the total number of the driving lanes in the carriageway.
The numbering is matched to [**LanePosition**](#LanePosition).
The bit `0` is used to indicate the innermost lane, bit `1` is used to indicate the second lane from inside border.
If a lane is closed to traffic, the corresponding bit shall be set to `1`. Otherwise, it shall be set to `0`.
**Categories:** Traffic information
NOTE: hard shoulder status is not provided by this DE but in [**HardShoulderStatus**](#HardShoulderStatus).
```asn1
DrivingLaneStatus ::= BIT STRING (SIZE (1..13))
```
### <a name="EmbarkationStatus"></a>EmbarkationStatus
This DE indicates whether a vehicle (e.g. public transport vehicle, truck) is under the embarkation process.
If that is the case, the value is *TRUE*, otherwise *FALSE*.
**Categories:** Vehicle information
**Revision:** _editorial update in V2.1.1_
```asn1
EmbarkationStatus ::= BOOLEAN
```
### <a name="EmergencyPriority"></a>EmergencyPriority
This DE indicates the right of priority requested or assumed by an operating emergency vehicle.
The right-of-priority bit shall be set to `1` if the corresponding right is requested.
The corresponding bit shall be set to 1 under the following conditions:
- 0 - `requestForRightOfWay` - when the vehicle is requesting/assuming the right of way,
- 1 - `requestForFreeCrossingAtATrafficLight` - when the vehicle is requesting/assuming the right to pass at a (red) traffic light.
* **requestForRightOfWay** (0)<br>
* **requestForFreeCrossingAtATrafficLight** (1)<br>
**Categories:** Traffic information
**Revision:** _description revised in V2.1.1_
```asn1
EmergencyPriority ::= BIT STRING {
requestForRightOfWay (0),
requestForFreeCrossingAtATrafficLight (1)
} (SIZE(2))
```
### <a name="EmergencyVehicleApproachingSubCauseCode"></a>EmergencyVehicleApproachingSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) "emergencyVehicleApproaching".
- 0 - `unavailable` - in case further detailed information on the emergency vehicle approaching event
- 1 - `emergencyVehicleApproaching` - in case an operating emergency vehicle is approaching,
- 2 - `prioritizedVehicleApproaching` - in case a prioritized vehicle is approaching,
* **unavailable** (0)<br>
* **emergencyVehicleApproaching** (1)<br>
* **prioritizedVehicleApproaching** (2)<br>
**Categories:** Traffic information
```asn1
EmergencyVehicleApproachingSubCauseCode ::= INTEGER {
unavailable (0),
emergencyVehicleApproaching (1),
prioritizedVehicleApproaching (2)
} (0..255)
```
### <a name="EnergyStorageType"></a>EnergyStorageType
This DE indicated the type of energy being used and stored in vehicle.
The corresponding bit shall be set to 1 under the following conditions:
- 0 - `hydrogenStorage` - when hydrogen is being used and stored in vehicle,
- 1 - `electricEnergyStorage` - when electric energy is being used and stored in vehicle,
- 2 - `liquidPropaneGas` - when liquid Propane Gas (LPG) is being used and stored in vehicle,
- 3 - `compressedNaturalGas ` - when compressedNaturalGas (CNG) is being used and stored in vehicle,
- 4 - `diesel` - when diesel is being used and stored in vehicle,
- 5 - `gasoline` - when gasoline is being used and stored in vehicle,
- 6 - `ammonia` - when ammonia is being used and stored in vehicle.
- Otherwise, the corresponding bit shall be set to `0`.
* **hydrogenStorage** (0)<br>
* **electricEnergyStorage** (1)<br>
* **liquidPropaneGas** (2)<br>
* **compressedNaturalGas** (3)<br>
* **diesel** (4)<br>
* **gasoline** (5)<br>
* **ammonia** (6)<br>
**Categories:** Vehicle information
**Revision:** _editorial revision in V2.1.1_
```asn1
EnergyStorageType ::= BIT STRING {
hydrogenStorage (0),
electricEnergyStorage (1),
liquidPropaneGas (2),
compressedNaturalGas (3),
diesel (4),
gasoline (5),
ammonia (6)
}(SIZE(7))
```
### <a name="EuVehicleCategoryL"></a>EuVehicleCategoryL
This DE represents one of the specific categories in the L category: L1, L2, L3, L4, L5, L6, or L7 according to UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references).
**Categories:** Vehicle information
```asn1
EuVehicleCategoryL ::= ENUMERATED { l1, l2, l3, l4, l5, l6, l7 }
```
### <a name="EuVehicleCategoryM"></a>EuVehicleCategoryM
This DE represents one of the specific categories in the M category: M1, M2, or M3 according to UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references).
**Categories:** Vehicle information
```asn1
EuVehicleCategoryM ::= ENUMERATED {m1, m2, m3}
```
### <a name="EuVehicleCategoryN"></a>EuVehicleCategoryN
This DE represents one of the specific categories in the N category: N1, N2, or N3 according to UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references).
**Categories:** Vehicle information
```asn1
EuVehicleCategoryN ::= ENUMERATED {n1, n2, n3}
```
### <a name="EuVehicleCategoryO"></a>EuVehicleCategoryO
This DE represents one of the specific categories in the O category: O1, O2, O3 or O4 according to UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references).
**Categories:** Vehicle information
```asn1
EuVehicleCategoryO ::= ENUMERATED {o1, o2, o3, o4}
```
### <a name="ExteriorLights"></a>ExteriorLights
This DE describes the status of the exterior light switches of a vehicle incl. VRU vehicles.
The corresponding bit shall be set to 1 under the following conditions:
- 0 - `lowBeamHeadlightsOn` - when the low beam head light switch is on,
- 1 - `highBeamHeadlightsOn` - when the high beam head light switch is on,
- 2 - `leftTurnSignalOn` - when the left turnSignal switch is on,
- 3 - `rightTurnSignalOn` - when the right turn signal switch is on,
- 4 - `daytimeRunningLightsOn` - when the daytime running light switch is on,
- 5 - `reverseLightOn` - when the reverse light switch is on,
- 6 - `fogLightOn` - when the tail fog light switch is on,
- 7 - `parkingLightsOn` - when the parking light switch is on.
If a vehicle is not equipped with a certain light or if the light switch status information is not available,
As the bit value indicates only the state of the switch, the turn signal and hazard signal bit values shall not
alternate with the blinking interval.
For hazard indicator, the `leftTurnSignalOn (2)` and `rightTurnSignalOn (3)` shall be both set to `1`.
* **lowBeamHeadlightsOn** (0)<br>
* **highBeamHeadlightsOn** (1)<br>
* **leftTurnSignalOn** (2)<br>
* **rightTurnSignalOn** (3)<br>
* **daytimeRunningLightsOn** (4)<br>
* **reverseLightOn** (5)<br>
* **fogLightOn** (6)<br>
* **parkingLightsOn** (7)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: The value of each bit indicates the state of the switch, which commands the corresponding light.
The bit corresponding to a specific light is set to `1`, when the corresponding switch is turned on,
either manually by the driver or automatically by a vehicle system. The bit value does not indicate
if the corresponding lamps are alight or not.
>>>
```asn1
ExteriorLights ::= BIT STRING {
lowBeamHeadlightsOn (0),
highBeamHeadlightsOn (1),
leftTurnSignalOn (2),
rightTurnSignalOn (3),
daytimeRunningLightsOn (4),
reverseLightOn (5),
fogLightOn (6),
parkingLightsOn (7)
} (SIZE(8))
```
### <a name="GenerationDeltaTime"></a>GenerationDeltaTime
This DE represents a timestamp based on TimestampIts modulo 65 536.
This means that generationDeltaTime = TimestampIts mod 65 536.
**Categories:** Basic information
**Revision:** _Created in V2.1.1 based on ETSI TS 103 900 [[1]](#references)_
```asn1
GenerationDeltaTime ::= INTEGER { oneMilliSec(1) } (0..65535)
```
### <a name="HardShoulderStatus"></a>HardShoulderStatus
This DE indicates the current status of a hard shoulder: whether it is available for special usage
(e.g. for stopping or for driving) or closed for all vehicles.
The value shall be set to:
- 0 - `availableForStopping` - if the hard shoulder is available for stopping in e.g. emergency situations,
- 1 - `closed` - if the hard shoulder is closed and cannot be occupied in any case,
- 2 - `availableForDriving` - if the hard shoulder is available for regular driving.
* **availableForStopping** (0)<br>
* **closed** (1)<br>
* **availableForDriving** (2)<br>
**Categories:** Traffic information
**Revision:** _Description revised in V2.1.1_
```asn1
HardShoulderStatus ::= ENUMERATED {
availableForStopping (0),
closed (1),
```
### <a name="HazardousLocation-AnimalOnTheRoadSubCauseCode"></a>HazardousLocation-AnimalOnTheRoadSubCauseCode
This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-AnimalOnTheRoad`.
- 0 - `unavailable` - in case further detailed information on the animal(s) on the road is unavailable,
- 1 - `wildAnimals` - in case wild animals of unknown size are present on the road,
- 2 - `herdOfAnimals` - in case a herd of animals is present on the road,
- 3 - `smallAnimals` - in case small size animals of unknown type are present on the road,
- 4 - `largeAnimals` - in case large size animals of unknown type are present on the road,
- 5 - `wildAnimalsSmall` - in case small size wild animal(s) are present on the road,
- 6 - `wildAnimalsLarge` - in case large size wild animal(s) are present on the road,
- 7 - `domesticAnimals` - in case domestic animal(s) of unknown size are detected on the road,
- 8 - `domesticAnimalsSmall` - in case small size domestic animal(s) are present on the road,
- 9 - `domesticAnimalsLarge` - in case large size domestic animal(s) are present on the road.
- 10-255 - are reserved for future usage.
* **unavailable** (0)<br>
* **wildAnimals** (1)<br>
* **herdOfAnimals** (2)<br>
* **smallAnimals** (3)<br>
* **largeAnimals** (4)<br>
* **wildAnimalsSmall** (5)<br>
* **wildAnimalsLarge** (6)<br>
* **domesticAnimals** (7)<br>
* **domesticAnimalsSmall** (8)<br>
* **domesticAnimalsLarge** (9)<br>
**Categories:** Traffic information
**Revision:** _V1.3.1, named values 5 to 9 added in V2.2.1_
```asn1
HazardousLocation-AnimalOnTheRoadSubCauseCode ::= INTEGER {
unavailable (0),
wildAnimals (1),
herdOfAnimals (2),
smallAnimals (3),
largeAnimals (4),
wildAnimalsSmall (5),
wildAnimalsLarge (6),
domesticAnimals (7),
domesticAnimalsSmall (8),
domesticAnimalsLarge (9)
} (0..255)
```
### <a name="HazardousLocation-DangerousCurveSubCauseCode"></a>HazardousLocation-DangerousCurveSubCauseCode
This DE represents the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-DangerousCurve`.
- 0 - `unavailable` - in case further detailed information on the dangerous curve is unavailable,
- 1 - `dangerousLeftTurnCurve` - in case the dangerous curve is a left turn curve,
- 2 - `dangerousRightTurnCurve` - in case the dangerous curve is a right turn curve,
- 3 - `multipleCurvesStartingWithUnknownTurningDirection` - in case of multiple curves for which the starting curve turning direction is not known,
- 4 - `multipleCurvesStartingWithLeftTurn` - in case of multiple curves starting with a left turn curve,
- 5 - `multipleCurvesStartingWithRightTurn` - in case of multiple curves starting with a right turn curve.
- 6-255 - are reserved for future usage.
The definition of whether a curve is dangerous may vary according to region and according to vehicle types/mass
and vehicle speed driving on the curve. This definition is out of scope of the present document.
* **unavailable** (0)<br>
* **dangerousLeftTurnCurve** (1)<br>
* **dangerousRightTurnCurve** (2)<br>
* **multipleCurvesStartingWithUnknownTurningDirection** (3)<br>
* **multipleCurvesStartingWithLeftTurn** (4)<br>
* **multipleCurvesStartingWithRightTurn** (5)<br>
**Categories:** Traffic information
```asn1
HazardousLocation-DangerousCurveSubCauseCode ::= INTEGER {
unavailable (0),
dangerousLeftTurnCurve (1),
dangerousRightTurnCurve (2),
multipleCurvesStartingWithUnknownTurningDirection (3),
multipleCurvesStartingWithLeftTurn (4),
multipleCurvesStartingWithRightTurn (5)
} (0..255)
```
### <a name="HazardousLocation-ObstacleOnTheRoadSubCauseCode"></a>HazardousLocation-ObstacleOnTheRoadSubCauseCode
This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-ObstacleOnTheRoad`.
- 0 - `unavailable` - in case further detailed information on the detected obstacle is unavailable,
- 1 - `shedLoad` - in case detected obstacle is large amount of obstacles (shedload),
- 2 - `partsOfVehicles`- in case detected obstacles are parts of vehicles,
- 3 - `partsOfTyres` - in case the detected obstacles are parts of tyres,
- 4 - `bigObjects` - in case the detected obstacles are big objects,
- 5 - `fallenTrees` - in case the detected obstacles are fallen trees,
- 6 - `hubCaps` - in case the detected obstacles are hub caps,
- 7 - `waitingVehicles`- in case the detected obstacles are waiting vehicles.
* **unavailable** (0)<br>
* **shedLoad** (1)<br>
* **partsOfVehicles** (2)<br>
* **partsOfTyres** (3)<br>
* **bigObjects** (4)<br>
* **fallenTrees** (5)<br>
* **hubCaps** (6)<br>
* **waitingVehicles** (7)<br>
**Categories:** Traffic information
```asn1
HazardousLocation-ObstacleOnTheRoadSubCauseCode ::= INTEGER {
unavailable (0),
shedLoad (1),
partsOfVehicles (2),
partsOfTyres (3),
bigObjects (4),
fallenTrees (5),
hubCaps (6),
waitingVehicles (7)
} (0..255)
```
### <a name="HazardousLocation-SurfaceConditionSubCauseCode"></a>HazardousLocation-SurfaceConditionSubCauseCode
This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-SurfaceCondition`.
- 0 - `unavailable` - in case further detailed information on the road surface condition is unavailable,
- 1 - `rockfalls` - in case rock falls are detected on the road surface,
- 2 - `earthquakeDamage`- in case the road surface is damaged by earthquake,
- 3 - `sewerCollapse` - in case of sewer collapse on the road surface,
- 4 - `subsidence` - in case road surface is damaged by subsidence,
- 5 - `snowDrifts` - in case road surface is damaged due to snow drift,
- 6 - `stormDamage` - in case road surface is damaged by strong storm,
- 7 - `burstPipe` - in case road surface is damaged due to pipe burst,
- 8 - `volcanoEruption` - in case road surface is damaged due to volcano eruption,
- 9 - `fallingIce` - in case road surface damage is due to falling ice,
- 10 - `fire` - in case there is fire on or near to the road surface.
* **unavailable** (0)<br>
* **rockfalls** (1)<br>
* **earthquakeDamage** (2)<br>
* **sewerCollapse** (3)<br>
* **subsidence** (4)<br>
* **snowDrifts** (5)<br>
* **stormDamage** (6)<br>
* **burstPipe** (7)<br>
* **volcanoEruption** (8)<br>
* **fallingIce** (9)<br>
* **fire** (10)<br>
**Categories:** Traffic information
```asn1
HazardousLocation-SurfaceConditionSubCauseCode ::= INTEGER {
unavailable (0),
rockfalls (1),
earthquakeDamage (2),
sewerCollapse (3),
subsidence (4),
snowDrifts (5),
stormDamage (6),
burstPipe (7),
volcanoEruption (8),
fallingIce (9),
fire (10)
} (0..255)
```
### <a name="HeadingConfidence"></a>HeadingConfidence
This DE indicates the heading confidence value which represents the estimated absolute accuracy of a heading value with a confidence level of 95 %.
- `n` (`n > 0` and `n < 126`) if the confidence value is equal to or less than n x 0,1 degree and more than (n-1) x 0,1 degree,
- `126` if the confidence value is out of range, i.e. greater than 12,5 degrees,
- `127` if the confidence value information is not available.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** GeoReference information
**Revision:** _Description revised in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**Wgs84AngleConfidence**](#Wgs84AngleConfidence) instead.
HeadingConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="HeadingValue"></a>HeadingValue
This DE represents the orientation of the horizontal velocity vector with regards to the WGS84 north.
When the information is not available, the DE shall be set to 3 601. The value 3600 shall not be used.
Unit: 0,1 degree
Categories: GeoReference information
* **wgs84North** (0)<br>
* **wgs84East** (900)<br>
* **wgs84South** (1800)<br>
* **wgs84West** (2700)<br>
* **doNotUse** (3600)<br>
* **unavailable** (3601)<br>
**Revision:** _Description revised in V2.1.1 (usage of value 3600 specified)_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**Wgs84AngleValue**](#Wgs84AngleValue) instead.
HeadingValue ::= INTEGER {
wgs84North (0),
wgs84East (900),
wgs84South (1800),
wgs84West (2700),
doNotUse (3600),
unavailable (3601)
} (0..3601)
```
### <a name="HeightLonCarr"></a>HeightLonCarr
This DE represents the height of the left or right longitude carrier of vehicle from base to top (left or right carrier seen from vehicle
rear to front).
The value shall be set to:
- `n` (`n ≥ 1` and `n < 99`) if the height information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,
- `99` if the height is out of range, i.e. equal to or greater than 0,98 m,
- `100` if the height information is not available.
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1 (the definition of 99 has changed slightly)_
unavailable(100)
} (1..100)
```
### <a name="HumanPresenceOnTheRoadSubCauseCode"></a>HumanPresenceOnTheRoadSubCauseCode
This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `humanPresenceOnTheRoad`.
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
- 0 - `unavailable` - in case further detailed information abou the human presence on the road is unavailable,
- 1 - `childrenOnRoadway` - in case children are present on the road,
- 2 - `cyclistOnRoadway` - in case cyclist(s) are present on the road,
- 3 - `motorcyclistOnRoadway` - in case motorcyclist(s) are present on the road,
- 4 - `pedestrian` - in case pedestrian(s) of any type are present on the road,
- 5 - `ordinary-pedestrian` - in case pedestrian(s) to which no more-specific profile applies are present on the road,
- 6 - `road-worker` - in case pedestrian(s) with the role of a road worker applies are present on the road,
- 7 - `first-responder` - in case pedestrian(s) with the role of a first responder applies are present on the road,
- 8 - `lightVruVehicle - in case light vru vehicle(s) of any type are present on the road,
- 9 - `bicyclist ` - in case cycle(s) and their bicyclist(s) are present on the road,
- 10 - `wheelchair-user` - in case wheelchair(s) and their user(s) are present on the road,
- 11 - `horse-and-rider` - in case horse(s) and rider(s) are present on the road,
- 12 - `rollerskater` - in case rolleskater(s) and skater(s) are present on the road,
- 13 - `e-scooter` - in case e-scooter(s) and rider(s) are present on the road,
- 14 - `personal-transporter` - in case personal-transporter(s) and rider(s) are present on the road,
- 15 - `pedelec` - in case pedelec(s) and rider(s) are present on the road,
- 16 - `speed-pedelec` - in case speed-pedelec(s) and rider(s) are present on the road,
- 17 - `ptw` - in case powered-two-wheeler(s) of any type are present on the road,
- 18 - `moped` - in case moped(s) and rider(s) are present on the road,
- 19 - `motorcycle` - in case motorcycle(s) and rider(s) are present on the road,
- 20 - `motorcycle-and-sidecar-right` - in case motorcycle(s) with sidecar(s) on the right and rider are present on the road,
- 21 - `motorcycle-and-sidecar-left` - in case motorcycle(s) with sidecar(s) on the left and rider are present on the road.
- 22-255 - are reserved for future usage.
* **unavailable** (0)<br>
* **childrenOnRoadway** (1)<br>
* **cyclistOnRoadway** (2)<br>
* **motorcyclistOnRoadway** (3)<br>
* **pedestrian** (4)<br>
* **ordinary-pedestrian** (5)<br>
* **road-worker** (6)<br>
* **first-responder** (7)<br>
* **lightVruVehicle** (8)<br>
* **bicyclist** (9)<br>
* **wheelchair-user** (10)<br>
* **horse-and-rider** (11)<br>
* **rollerskater** (12)<br>
* **e-scooter** (13)<br>
* **personal-transporter** (14)<br>
* **pedelec** (15)<br>
* **speed-pedelec** (16)<br>
* **ptw** (17)<br>
* **moped** (18)<br>
* **motorcycle** (19)<br>
* **motorcycle-and-sidecar-right** (20)<br>
* **motorcycle-and-sidecar-left** (21)<br>
**Categories:** Traffic information
**Revision:** _editorial revision in V2.1.1, named values 4-21 added in V2.2.1_
```asn1
HumanPresenceOnTheRoadSubCauseCode ::= INTEGER {
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
unavailable (0),
childrenOnRoadway (1),
cyclistOnRoadway (2),
motorcyclistOnRoadway (3),
pedestrian (4),
ordinary-pedestrian (5),
road-worker (6),
first-responder (7),
lightVruVehicle (8),
bicyclist (9),
wheelchair-user (10),
horse-and-rider (11),
rollerskater (12),
e-scooter (13),
personal-transporter (14),
pedelec (15),
speed-pedelec (16),
ptw (17),
moped (18),
motorcycle (19),
motorcycle-and-sidecar-right (20),
motorcycle-and-sidecar-left (21)
} (0..255)
```
### <a name="HumanProblemSubCauseCode"></a>HumanProblemSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) "humanProblem".
- 0 - `unavailable` - in case further detailed information on human health problem is unavailable,
- 1 - `glycemiaProblem`- in case human problem is due to glycaemia problem,
- 2 - `heartProblem` - in case human problem is due to heart problem.
* **unavailable** (0)<br>
* **glycemiaProblem** (1)<br>
* **heartProblem** (2)<br>
**Categories:** Traffic information
```asn1
HumanProblemSubCauseCode ::= INTEGER {
unavailable (0),
glycemiaProblem (1),
heartProblem (2)
} (0..255)
```
### <a name="Identifier1B"></a>Identifier1B
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
Identifier1B ::= INTEGER (0..255)
```
### <a name="Identifier2B"></a>Identifier2B
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
Identifier2B ::= INTEGER (0..65535)
```
### <a name="ImpassabilitySubCauseCode"></a>ImpassabilitySubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `impassability`
The value shall be set to:
- 0 `unavailable` - in case further detailed information about the unmanaged road blockage is unavailable,
- 1 `flooding ` - in case the road is affected by flooding,
- 2 `dangerOfAvalanches` - in case the road is at risk of being affected or blocked by avalanches,
- 3 `blastingOfAvalanches` - in case there is an active blasting of avalanches on or near the road,
- 4 `landslips` - in case the road is affected by landslips,
- 5 `chemicalSpillage` - in case the road is affected by chemical spillage,
- 6 `winterClosure` - in case the road is impassable due to a winter closure.
- 7 `sinkhole` - in case the road is impassable due to large holes in the road surface.
- 8 `earthquakeDamage` - in case the road is obstructed or partially obstructed because of damage caused by an earthquake.
- 9 `fallenTrees` - in case the road is obstructed or partially obstructed by one or more fallen trees.
- 10 `rockfalls` - in case the road is obstructed or partially obstructed due to fallen rocks.
- 11 `sewerOverflow` - in case the road is obstructed or partially obstructed by overflows from one or more sewers.
- 12 `stormDamage` - in case the road is obstructed or partially obstructed by debris caused by strong winds.
- 13 `subsidence` - in case the road surface has sunken or collapsed in places.
- 14 `burstPipe` - in case the road surface has sunken or collapsed in places due to burst pipes.
- 15 `burstWaterMain` - in case the road is obstructed due to local flooding and/or subsidence.
- 16 `fallenPowerCables` - in case the road is obstructed or partly obstructed by one or more fallen power cables.
- 17 `snowDrifts` - in case the road is obstructed or partially obstructed by snow drifting in progress or patches of deep snow due to earlier drifting.
- 15-255 - are reserved for future usage.
Values:
* **unavailable** (0)<br>
* **flooding** (1)<br>
* **dangerOfAvalanches** (2)<br>
* **blastingOfAvalanches** (3)<br>
* **landslips** (4)<br>
* **chemicalSpillage** (5)<br>
* **winterClosure** (6)<br>
* **sinkhole** (7)<br>
* **earthquakeDamage** (8)<br>
* **fallenTrees** (9)<br>
* **rockfalls** (10)<br>
* **sewerOverflow** (11)<br>
* **stormDamage** (12)<br>
* **subsidence** (13)<br>
* **burstPipe** (14)<br>
* **burstWaterMain** (15)<br>
* **fallenPowerCables** (16)<br>
* **snowDrifts** (17)<br>
**Categories:** Traffic information
**Revision:** _Created in V2.2.1_
```asn1
ImpassabilitySubCauseCode ::= INTEGER {
unavailable (0),
flooding (1),
dangerOfAvalanches (2),
blastingOfAvalanches (3),
landslips (4),
chemicalSpillage (5),
winterClosure (6),
sinkhole (7),
earthquakeDamage (8),
fallenTrees (9),
rockfalls (10),
sewerOverflow (11),
stormDamage (12),
subsidence (13),
burstPipe (14),
burstWaterMain (15),
fallenPowerCables (16),
snowDrifts (17)
### <a name="InformationQuality"></a>InformationQuality
This DE represents the quality level of provided information.
- `0` if the information is unavailable,
- `1` if the quality level is lowest,
- `n` (`n > 1` and `n < 7`) if the quality level is n,
- `7` if the quality level is highest.
**Categories:** Basic information
**Revision:** _Editorial update in V2.1.1_
NOTE: Definition of quality level is out of scope of the present document.
```asn1
InformationQuality ::= INTEGER (0..7)
```
### <a name="InterferenceManagementZoneType"></a>InterferenceManagementZoneType
This DE defines the type of an interference management zone, so that an ITS-S can
assert the actions to do while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station).
It is an extension of the type [**ProtectedZoneType**](#ProtectedZoneType).
The value shall be set to:
- 0 - `permanentCenDsrcTolling` - as specified in ETSI TS 102 792 [[14]](#references),
- 1 - `temporaryCenDsrcTolling` - as specified in ETSI TS 102 792 [[14]](#references),
- 2 - `unavailable` - default value. Set to 2 for backwards compatibility with DSRC tolling,
- 3 - `urbanRail` - as specified in ETSI TS 103 724 [[13]](#references), clause 7,
- 4 - `satelliteStation` - as specified in ETSI TS 103 724 [[13]](#references), clause 7,
- 5 - `fixedLinks` - as specified in ETSI TS 103 724 [[13]](#references), clause 7.
* **permanentCenDsrcTolling** (0)<br>
* **temporaryCenDsrcTolling** (1)<br>
* **unavailable** (2)<br>
* **urbanRail** (3)<br>
* **satelliteStation** (4)<br>
* **fixedLinks** (5)<br>
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
```asn1
InterferenceManagementZoneType ::= ENUMERATED {
permanentCenDsrcTolling (0),
temporaryCenDsrcTolling (1),
unavailable (2),
urbanRail (3),
satelliteStation (4),
fixedLinks (5),
...
}
```
### <a name="Iso3833VehicleType"></a>Iso3833VehicleType
This DE represents the vehicle type according to ISO 3833 [[22]](#references).
A "term No" refers to the number of the corresponding term and its definition in ISO 3833.
The value shall be set to:
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
- 0 - `passengerCar` - term No 3.1.1
- 1 - `saloon` - term No 3.1.1.1 (sedan)
- 2 - `convertibleSaloon` - term No 3.1.1.2
- 3 - `pullmanSaloon` - term No 3.1.1.3
- 4 - `stationWagon` - term No 3.1.1.4
- 5 - `truckStationWagon` - term No 3.1.1.4.1
- 6 - `coupe` - term No 3.1.1.5 (coupe)
- 7 - `convertible` - term No 3.1.1.6 (open tourer, roadstar, spider)
- 8 - `multipurposePassengerCar` - term No 3.1.1.7
- 9 - `forwardControlPassengerCar`- term No 3.1.1.8
- 10 - `specialPassengerCar` - term No 3.1.1.9
- 11 - `bus` - term No 3.1.2
- 12 - `minibus` - term No 3.1.2.1
- 13 - `urbanBus` - term No 3.1.2.2
- 14 - `interurbanCoach` - term No 3.1.2.3
- 15 - `longDistanceCoach` - term No 3.1.2.4
- 16 - `articulatedBus` - term No 3.1.2.5
- 17 - `trolleyBus ` - term No 3.1.2.6
- 18 - `specialBus` - term No 3.1.2.7
- 19 - `commercialVehicle` - term No 3.1.3
- 20 - `specialCommercialVehicle` - term No 3.1.3.1
- 21 - `specialVehicle` - term No 3.1.4
- 22 - `trailingTowingVehicle` - term No 3.1.5 (draw-bar tractor)
- 23 - `semiTrailerTowingVehicle` - term No 3.1.6 (fifth wheel tractor)
- 24 - `trailer` - term No 3.2.1
- 25 - `busTrailer` - term No 3.2.1.1
- 26 - `generalPurposeTrailer` - term No 3.2.1.2
- 27 - `caravan` - term No 3.2.1.3
- 28 - `specialTrailer` - term No 3.2.1.4
- 29 - `semiTrailer` - term No 3.2.2
- 30 - `busSemiTrailer` - term No 3.2.2.1
- 31 - `generalPurposeSemiTrailer` - term No 3.2.2.2
- 32 - `specialSemiTrailer` - term No 3.2.2.3
- 33 - `roadTrain` - term No 3.3.1
- 34 - `passengerRoadTrain` - term No 3.3.2
- 35 - `articulatedRoadTrain` - term No 3.3.3
- 36 - `doubleRoadTrain` - term No 3.3.4
- 37 - `compositeRoadTrain` - term No 3.3.5
- 38 - `specialRoadTrain` - term No 3.3.6
- 39 - `moped` - term No 3.4
- 40 - `motorCycle` - term No 3.5
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
* **passengerCar** (0)<br>
* **saloon** (1)<br>
* **convertibleSaloon** (2)<br>
* **pullmanSaloon** (3)<br>
* **stationWagon** (4)<br>
* **truckStationWagon** (5)<br>
* **coupe** (6)<br>
* **convertible** (7)<br>
* **multipurposePassengerCar** (8)<br>
* **forwardControlPassengerCar** (9)<br>
* **specialPassengerCar** (10)<br>
* **bus** (11)<br>
* **minibus** (12)<br>
* **urbanBus** (13)<br>
* **interurbanCoach** (14)<br>
* **longDistanceCoach** (15)<br>
* **articulatedBus** (16)<br>
* **trolleyBus** (17)<br>
* **specialBus** (18)<br>
* **commercialVehicle** (19)<br>
* **specialCommercialVehicle** (20)<br>
* **specialVehicle** (21)<br>
* **trailingTowingVehicle** (22)<br>
* **semiTrailerTowingVehicle** (23)<br>
* **trailer** (24)<br>
* **busTrailer** (25)<br>
* **generalPurposeTrailer** (26)<br>
* **caravan** (27)<br>
* **specialTrailer** (28)<br>
* **semiTrailer** (29)<br>
* **busSemiTrailer** (30)<br>
* **generalPurposeSemiTrailer** (31)<br>
* **specialSemiTrailer** (32)<br>
* **roadTrain** (33)<br>
* **passengerRoadTrain** (34)<br>
* **articulatedRoadTrain** (35)<br>
* **doubleRoadTrain** (36)<br>
* **compositeRoadTrain** (37)<br>
* **specialRoadTrain** (38)<br>
* **moped** (39)<br>
* **motorCycle** (40)<br>
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
passengerCar (0),
saloon (1),
convertibleSaloon (2),
pullmanSaloon (3),
stationWagon (4),
truckStationWagon (5),
coupe (6),
convertible (7),
multipurposePassengerCar (8),
forwardControlPassengerCar (9),
specialPassengerCar (10),
bus (11),
minibus (12),
urbanBus (13),
interurbanCoach (14),
longDistanceCoach (15),
articulatedBus (16),
trolleyBus (17),
specialBus (18),
commercialVehicle (19),
specialCommercialVehicle (20),
specialVehicle (21),
trailingTowingVehicle (22),
semiTrailerTowingVehicle (23),
trailer (24),
busTrailer (25),
generalPurposeTrailer (26),
caravan (27),
specialTrailer (28),
semiTrailer (29),
busSemiTrailer (30),
generalPurposeSemiTrailer (31),
specialSemiTrailer (32),
roadTrain (33),
passengerRoadTrain (34),
articulatedRoadTrain (35),
doubleRoadTrain (36),
compositeRoadTrain (37),
specialRoadTrain (38),
moped (39),
motorCycle (40)
### <a name="IssuerIdentifier"></a>IssuerIdentifier
This DE represent the identifier of an organization according to the applicable registry.
**Categories:** Basic information
**Revision:** _Created in V2.2.1 based on ISO 14816 [[23]](#references)_
```asn1
IssuerIdentifier ::= INTEGER(0 .. 16383)
```
### <a name="IviIdentificationNumber"></a>IviIdentificationNumber
This DE represents the identifier of the IVIM.
**Categories:** Basic information
**Revision:** _Created in V2.2.1 based on ETSI TS 103 301 [[15]](#references)_
```asn1
IviIdentificationNumber::= INTEGER(1..32767,..., 8388607)
```
This DE indicates a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway.
For right-hand traffic roads, the value shall be set to:
- `-1` if the position is off, i.e. besides the road,
- `0` if the position is on the inner hard shoulder, i.e. the hard should adjacent to the leftmost lane,
- `n` (`n > 0` and `n < 14`), if the position is on the n-th driving lane counted from the leftmost lane to the rightmost lane of a specific traffic direction,
- `14` if the position is on the outer hard shoulder, i.e. the hard should adjacent to rightmost lane (if present).
For left-hand traffic roads, the value shall be set to:
- `-1` if the position is off, i.e. besides the road,
- `0` if the position is on the inner hard shoulder, i.e. the hard should adjacent to the rightmost lane,
- `n` (`n > 0` and `n < 14`), if the position is on the n-th driving lane counted from the rightmost lane to the leftmost lane of a specific traffic direction,
- `14` if the position is on the outer hard shoulder, i.e. the hard should adjacent to leftmost lane (if present).
If the carriageway allows only traffic in one direction (e.g. in case of dual or multiple carriageway roads), the position is counted from the physical border of the carriageway.
If the carriageway allows traffic in both directions and there is no physical delimitation between traffic directions (e.g. on a single carrriageway road),
the position is counted from the legal (i.e. optical) separation between traffic directions (horizontal marking).
If not indicated otherwise (by lane markings or traffic signs), the legal separation on carriageways allowing traffic on both directions is identified as follows:
- If the total number of lanes N is even, the lanes are divided evenly between the traffic directions starting from the outside of the carriageway on both sides and the
imaginary separation between traffic directions is on the border between the even number of lanes N/2.
- If the total number of lanes N is odd, the lanes are divided evenly between traffic direction starting from the outside of the carriageway on both sides.
The remaining middle lane is assigned to both traffic directions as innermost lane.
* **offTheRoad** (-1)<br>
* **innerHardShoulder** (0)<br>
* **outerHardShoulder** (14)<br>
**Categories:** Road topology information
**Revision:** _Description of the legal separation of carriageways added in V2.2.1_
NOTE: in practice this means that the position is counted from "inside" to "outside" no matter which traffic practice is used.
```asn1
LanePosition ::= INTEGER {
offTheRoad (-1),
innerHardShoulder (0),
outerHardShoulder (14)
} (-1..14)
```
### <a name="LaneType"></a>LaneType
- 0 - `traffic` - Lane dedicated to the movement of vehicles,
- 1 - `through` - Lane dedicated to the movement of vehicles travelling ahead and not turning,
- 2 - `reversible` - Lane where the direction of traffic can be changed to match the peak flow,
- 3 - `acceleration` - Lane that allows vehicles entering a road to accelerate to the speed of through traffic before merging with it,
- 4 - `deceleration` - Lane that allows vehicles exiting a road to decelerate before leaving it,
- 5 - `leftHandTurning` - Lane reserved for slowing down and making a left turn, so as not to disrupt traffic,
- 6 - `rightHandTurning` - Lane reserved for slowing down and making a right turn so as not to disrupt traffic,
- 7 - `dedicatedVehicle` - Lane dedicated to movement of motor vehicles with specific characteristics, such as heavy goods vehicles, etc.,
- 8 - `bus` - Lane dedicated to movement of buses providing public transport,
- 9 - `taxi` - Lane dedicated to movement of taxis,
- 10 - `hov` - Carpooling lane or high occupancy vehicle lane,
- 11 - `hot` - High occupancy vehicle lanes that is allowed to be used without meeting the occupancy criteria by paying a toll,
- 12 - `pedestrian` - Lanes dedicated to pedestrians such as pedestrian sidewalk paths,
- 13 - `cycleLane` - Lane dedicated to exclusive or preferred use by bicycles,
- 14 - `median` - Lane not dedicated to movement of vehicles but representing a median / central reservation such as the central median,
separating the two directional carriageways of the highway,
- 15 - `striping` - Lane not dedicated to movement of vehicles but covered with roadway markings,
- 16 - `trackedVehicle` - Lane dedicated to movement of trains, trams and trolleys,
- 17 - `parking` - Lanes dedicated to vehicles parking, stopping and loading lanes,
- 18 - `emergency` - Lane dedicated to vehicles in breakdown or to emergency vehicles also called hard shoulder,
- 19 - `verge` - Lane representing the verge, i.e. a narrow strip of grass or plants and sometimes also trees located between
- 20 `minimumRiskManoeuvre` - Lane dedicated to automated vehicles making a minimum risk manoeuvre,
- 21 `separatedCycleLane` - Lane dedicated to exclusive or preferred use by bicycles that is phyisically separated from the vehicle-traffic lanes, e.g. by a verge.
- values 22 to 30 reserved for future use.
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
* **traffic** (0)<br>
* **through** (1)<br>
* **reversible** (2)<br>
* **acceleration** (3)<br>
* **deceleration** (4)<br>
* **leftHandTurning** (5)<br>
* **rightHandTurning** (6)<br>
* **dedicatedVehicle** (7)<br>
* **bus** (8)<br>
* **taxi** (9)<br>
* **hov** (10)<br>
* **hot** (11)<br>
* **pedestrian** (12)<br>
* **cycleLane** (13)<br>
* **median** (14)<br>
* **striping** (15)<br>
* **trackedVehicle** (16)<br>
* **parking** (17)<br>
* **emergency** (18)<br>
* **verge** (19)<br>
* **minimumRiskManoeuvre** (20)<br>
**Categories:** Road topology information
**Revision:** _Created in V2.1.1, named value 21 added in V2.2.1_
```asn1
LaneType::= INTEGER{
traffic (0),
through (1),
reversible (2),
acceleration (3),
deceleration (4),
leftHandTurning (5),
rightHandTurning (6),
dedicatedVehicle (7),
bus (8),
taxi (9),
hov (10),
pedestrian (12),
cycleLane (13),
median (14),
striping (15),
trackedVehicle (16),
parking (17),
emergency (18),
verge (19),
minimumRiskManoeuvre (20),
unknown (31)
}(0..31)
```
### <a name="LaneWidth"></a>LaneWidth
This DE represents the width of a lane measured at a defined position.
- `n` (`n > 0` and `n < 1022`) if the lane width information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,
- `1022` if the lane width is out of range, i.e. greater than 10,21 m,
- `1023` if the lane width information is not available.
**Categories:** Road topology information
**Revision:** _Created in V2.1.1_
```asn1
LaneWidth::= INTEGER (0..1023)
```
### <a name="Latitude"></a>Latitude
This DE represents the absolute geographical latitude in a WGS84 coordinate system, providing a range of 90 degrees in north or
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
- `n` (`n ≥ -900 000 000` and `n < 0`) x 10<sup>-7</sup> degree, i.e. negative values for latitudes south of the Equator,
- `0` is used for the latitude of the equator,
- `n` (`n > 0` and `n < 900 000 001`) x 10<sup>-7</sup> degree, i.e. positive values for latitudes north of the Equator,
- `900 000 001` when the information is unavailable.
**Unit:** _10<sup>-7</sup> degree_
**Categories:** GeoReference information
**Revision:** _Editorial update in V2.1.1_
```asn1
Latitude ::= INTEGER {
unavailable(900000001)
} (-900000000..900000001)
```
### <a name="LateralAccelerationValue"></a>LateralAccelerationValue
This DE represents the vehicle acceleration at lateral direction in the centre of the mass of the empty vehicle.
It corresponds to the vehicle coordinate system as specified in ISO 8855 [[21]](#references).
- `-160` for acceleration values equal to or less than -16 m/s<sup>2</sup>,
- `n` (`n > -160` and `n ≤ 0`) to indicate that the vehicle is accelerating towards the right side with regards to the vehicle orientation
with acceleration equal to or less than n x 0,1 m/s<sup>2</sup> and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `n` (`n > 0` and `n < 160`) to indicate that the vehicle is accelerating towards the left hand side with regards to the vehicle orientation
with acceleration equal to or less than n x 0,1 m/s<sup>2</sup> and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `160` for acceleration values greater than 15,9 m/s<sup>2</sup>,
- `161` when the data is unavailable.
* **negativeOutOfRange** (-160)<br>
* **positiveOutOfRange** (160)<br>
* **unavailable** (161)<br>
**Unit:** _0,1 m/s<sup>2</sup>_
**Categories:** Vehicle information
**Revision:** _Description updated in V2.1.1 (the meaning of 160 has changed slightly)._
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**AccelerationValue**](#AccelerationValue) instead.
LateralAccelerationValue ::= INTEGER {
negativeOutOfRange (-160),
positiveOutOfRange (160),
unavailable (161)
} (-160 .. 161)
```
### <a name="LightBarSirenInUse"></a>LightBarSirenInUse
This DE indicates the status of light bar and any sort of audible alarm system besides the horn.
This includes various common sirens as well as backup up beepers and other slow speed manoeuvring alerts.
The corresponding bit shall be set to 1 under the following conditions:
- 0 - `lightBarActivated` - when the light bar is activated,
- 1 - `sirenActivated` - when the siren is activated.
* **lightBarActivated** (0)<br>
* **sirenActivated** (1)<br>
**Categories:** Vehicle information
**Revision:** _Editorial update in V2.1.1_
```asn1
LightBarSirenInUse ::= BIT STRING {
lightBarActivated (0),
sirenActivated (1)
} (SIZE(2))
```
### <a name="Longitude"></a>Longitude
This DE represents the absolute geographical longitude in a WGS84 coordinate system, providing a range of 180 degrees
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
- `n` (`n > -1 800 000 000` and `n < 0`) x 10<sup>-7</sup> degree, i.e. negative values for longitudes to the west,
- `0` to indicate the prime meridian,
- `n` (`n > 0` and `n < 1 800 000 001`) x 10<sup>-7</sup> degree, i.e. positive values for longitudes to the east,
- `1 800 000 001` when the information is unavailable.
* **valueNotUsed** (-1800000000)<br>
* **unavailable** (1800000001)<br>
**Unit:** _10<sup>-7</sup> degree_
**Categories:** GeoReference information
**Revision:** _Description revised in V2.1.1_
```asn1
Longitude ::= INTEGER {
valueNotUsed (-1800000000),
unavailable (1800000001)
} (-1800000000..1800000001)
```
### <a name="LongitudinalAccelerationValue"></a>LongitudinalAccelerationValue
This DE represents the vehicle acceleration at longitudinal direction in the centre of the mass of the empty vehicle.
The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [[21]](#references), clause 2.11.
- `-160` for acceleration values equal to or less than -16 m/s<sup>2</sup>,
- `n` (`n > -160` and `n ≤ 0`) to indicate that the vehicle is braking with acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>
- `n` (`n > 0` and `n < 160`) to indicate that the vehicle is accelerating with acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `160` for acceleration values greater than 15,9 m/s<sup>2</sup>,
- `161` when the data is unavailable.
This acceleration is along the tangent plane of the road surface and does not include gravity components.
* **negativeOutOfRange** (-160)<br>
* **positiveOutOfRange** (160)<br>
* **unavailable** (161)<br>
**Unit:** _0,1 m/s<sup>2</sup>_
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 160 has changed slightly). T_
NOTE: The empty load vehicle is defined in ISO 1176 [[8]](#references), clause 4.6.
LongitudinalAccelerationValue::= INTEGER {
negativeOutOfRange (-160),
positiveOutOfRange (160),
unavailable (161)
} (-160 .. 161)
```
### <a name="LongitudinalLanePositionValue"></a>LongitudinalLanePositionValue
This DE represents the longitudinal offset of a map-matched position along a matched lane, beginning from the lane's starting point.
- `n` (`n ≥ 0` and `n < 32766`) if the longitudinal offset information is equal to or less than n x 0,1 metre and more than (n-1) x 0,1 metre,
- `32 766` if the longitudinal offset is out of range, i.e. greater than 3276,5 m,
- `32 767` if the longitudinal offset information is not available.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
LongitudinalLanePositionValue ::= INTEGER {
outOfRange(32766),
unavailable(32767)
}(0..32767)
```
### <a name="LongitudinalLanePositionConfidence"></a>LongitudinalLanePositionConfidence
This DE indicates the longitudinal lane position confidence value which represents the estimated accuracy of longitudinal lane position measurement with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 1 022`) if the confidence value is equal to or less than n x 0,1 m, and more than (n-1) x 0,1 m,
- `1 022` if the confidence value is out of range i.e. greater than 102,1 m,
- `1 023` if the confidence value is unavailable.
* **outOfRange** (1022)<br>
* **unavailable** (1023)<br>
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
```asn1
LongitudinalLanePositionConfidence ::= INTEGER {
outOfRange (1022),
unavailable (1023)
} (0..1023)
### <a name="MatrixIncludedComponents"></a>MatrixIncludedComponents
This DE indicates the components of an [**PerceivedObject**](#PerceivedObject) that are included in the [**LowerTriangularPositiveSemidefiniteMatrix**](#LowerTriangularPositiveSemidefiniteMatrix).
The corresponding bit shall be set to 1 if the component is included:
- 0 - `xCoordinate` - when the component xCoordinate of the component [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) is included,
- 1 - `yCoordinate` - when the component yCoordinate of the component [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) is included,
- 2 - `zCoordinate` - when the component zCoordinate of the component [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) is included,
- 3 - `xVelocityOrVelocityMagnitude` - when the component xVelocity of the component [**VelocityCartesian**](#VelocityCartesian) or the component VelocityMagnitude of the component [**VelocityPolarWithZ**](#VelocityPolarWithZ) is included,
- 4 - `yVelocityOrVelocityDirection` - when the component yVelocity of the component [**VelocityCartesian**](#VelocityCartesian) or the component VelocityDirection of the component [**VelocityPolarWithZ**](#VelocityPolarWithZ) is included,
- 5 - `zVelocity` - when the component zVelocity of the component [**VelocityCartesian**](#VelocityCartesian) or of the component [**VelocityPolarWithZ**](#VelocityPolarWithZ) is included,
- 6 - `xAccelOrAccelMagnitude` - when the component xAcceleration of the component [**AccelerationCartesian**](#AccelerationCartesian) or the component AccelerationMagnitude of the component [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) is included,
- 7 - `yAccelOrAccelDirection` - when the component yAcceleration of the component [**AccelerationCartesian**](#AccelerationCartesian) or the component AccelerationDirection of the component [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) is included,
- 8 - `zAcceleration` - when the component zAcceleration of the component [**AccelerationCartesian**](#AccelerationCartesian) or of the component [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) is included,
- 9 - `zAngle` - when the component zAngle is included,
- 10 - `yAngle` - when the component yAngle is included,
- 11 - `xAngle` - when the component xAngle is included,
- 12 - `zAngularVelocity` - when the component zAngularVelocity is included.
* **xPosition** (0)<br>
* **yPosition** (1)<br>
* **zPosition** (2)<br>
* **xVelocityOrVelocityMagnitude** (3)<br>
* **yVelocityOrVelocityDirection** (4)<br>
* **zSpeed** (5)<br>
* **xAccelOrAccelMagnitude** (6)<br>
* **yAccelOrAccelDirection** (7)<br>
* **zAcceleration** (8)<br>
* **zAngle** (9)<br>
* **yAngle** (10)<br>
* **xAngle** (11)<br>
* **zAngularVelocity** (12)<br>
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
MatrixIncludedComponents::= BIT STRING{
xPosition (0),
yPosition (1),
zPosition (2),
xVelocityOrVelocityMagnitude (3),
yVelocityOrVelocityDirection (4),
zSpeed (5),
xAccelOrAccelMagnitude (6),
yAccelOrAccelDirection (7),
zAcceleration (8),
zAngle (9),
yAngle (10),
xAngle (11),
This DE represents the type of facility layer message.
- 1 - `denm` - for Decentralized Environmental Notification Message (DENM) as specified in ETSI EN 302 637-3 [[2]](#references),
- 2 - `cam` - for Cooperative Awareness Message (CAM) as specified in ETSI EN 302 637-2 [[1]](#references),
- 3 - `poim` - for Point of Interest message as specified in ETSI TS 103 916 [[9]](#references),
- 4 - `spatem` - for Signal Phase And Timing Extended Message (SPATEM) as specified in ETSI TS 103 301 [[15]](#references),
- 5 - `mapem` - for MAP Extended Message (MAPEM) as specified in ETSI TS 103 301 [[15]](#references),
- 6 - `ivim` - for in Vehicle Information Message (IVIM) as specified in ETSI TS 103 301 [[15]](#references),
- 7 - `rfu1` - reserved for future usage,
- 8 - `rfu2` - reserved for future usage,
- 9 - `srem` - for Signal Request Extended Message as specified in ETSI TS 103 301 [[15]](#references),
- 10 - `ssem` - for Signal request Status Extended Message as specified in ETSI TS 103 301 [[15]](#references),
- 11 - `evcsn` - for Electrical Vehicle Charging Spot Notification message as specified in ETSI TS 101 556-1 [[9]](#references),
- 12 - `saem` - for Services Announcement Extended Message as specified in ETSI EN 302 890-1 [[17]](#references),
- 13 - `rtcmem` - for Radio Technical Commission for Maritime Services Extended Message (RTCMEM) as specified in ETSI TS 103 301 [[15]](#references),
- 14 - `cpm` - reserved for Collective Perception Message (CPM),
- 15 - `imzm` - for Interference Management Zone Message (IMZM) as specified in ETSI TS 103 724 [[13]](#references),
- 16 - `vam` - for Vulnerable Road User Awareness Message as specified in ETSI TS 130 300-3 [[12]](#references),
- 17 - `dsm` - reserved for Diagnosis, logging and Status Message,
- 18 - `pcim` - reserved for Parking Control Infrastructure Message,
- 19 - `pcvm` - reserved for Parking Control Vehicle Message,
- 20 - `mcm` - reserved for Manoeuvre Coordination Message,
- 21 - `pam` - reserved for Parking Availability Message,
* **spatem** (4)<br>
* **mapem** (5)<br>
* **ivim** (6)<br>
* **srem** (9)<br>
* **ssem** (10)<br>
* **evcsn** (11)<br>
* **saem** (12)<br>
* **rtcmem** (13)<br>
* **cpm** (14)<br>
* **imzm** (15)<br>
* **vam** (16)<br>
* **dsm** (17)<br>
* **pcim** (18)<br>
* **pcvm** (19)<br>
* **mcm** (20)<br>
* **pam** (21)<br>
**Categories:** Communication information
**Revision:** _Created in V2.1.1 from [**ItsPduHeader**](#ItsPduHeader). Value 3 re-assigned to poim and value 7 and 8 reserved in V2.2.1_
```asn1
MessageId::= INTEGER {
denm (1),
cam (2),
srem (9),
ssem (10),
evcsn (11),
saem (12),
rtcmem (13),
cpm (14),
imzm (15),
vam (16),
dsm (17),
pcim (18),
pcvm (19),
mcm (20),
pam (21)
} (0..255)
```
### <a name="NumberOfOccupants"></a>NumberOfOccupants
This DE represents the number of occupants in a vehicle.
- `n` (`n ≥ 0` and `n < 126`) for the number n of occupants,
- `126` for values equal to or higher than 125,
- `127` if information is not available.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _Editorial update in V2.1.1_
```asn1
NumberOfOccupants ::= INTEGER {
outOfRange (126),
unavailable (127)
} (0 .. 127)
```
### <a name="ObjectPerceptionQuality"></a>ObjectPerceptionQuality
This DE represents a single-value indication about the overall information quality of a perceived object.
- `0` : if there is no confidence in detected object, e.g. for "ghost"-objects or if confidence could not be computed,
- `n` (`n > 0` and `n < 15`) : for the applicable confidence value,
- `15` : if there is full confidence in the detected Object.
* **noConfidence** (0)<br>
* **fullConfidence** (15)<br>
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
noConfidence (0),
fullConfidence (15)
} (0..15)
```
### <a name="ObjectDimensionValue"></a>ObjectDimensionValue
This DE represents a single dimension of an object.
- `n` (`n > 0` and `n < 255`) if the accuracy is equal to or less than n x 0,1 m, and more than (n-1) x 0,1 m,
- `255` if the accuracy is out of range i.e. greater than 25,4 m,
- `256` if the data is unavailable.
* **outOfRange** (255)<br>
* **unavailable** (256)<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
ObjectDimensionValue ::= INTEGER {
outOfRange (255),
unavailable (256)
}(1..256)
```
### <a name="ObjectDimensionConfidence"></a>ObjectDimensionConfidence
This DE indicates the object dimension confidence value which represents the estimated absolute accuracy of an object dimension value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 31`) if the confidence value is equal to or less than n x 0,1 metre, and more than (n-1) x 0,1 metre,
- `31` if the confidence value is out of range i.e. greater than 3,0 m,
- `32` if the confidence value is unavailable.
* **outOfRange** (31)<br>
* **unavailable** (32)<br>
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
ObjectDimensionConfidence ::= INTEGER {
outOfRange (31),
unavailable (32)
} (1..32)
```
### <a name="ObjectFace"></a>ObjectFace
This DE indicates the face or part of a face of a solid object.
The object is modelled as a rectangular prism that has a length that is greater than its width, with the faces of the object being defined as:
- front: the face defined by the prism's width and height, and which is the first face in direction of longitudinal movement of the object,
- back: the face defined by the prism's width and height, and which is the last face in direction of longitudinal movement of the object,
- side: the faces defined by the prism's length and height with "left" and "right" defined by looking at the front face and "front" and "back" defined w.r.t to the front and back faces.
Note: It is permissible to derive the required object dimensions and orientation from models to provide a best guess.
* **front** (0)<br>
* **sideLeftFront** (1)<br>
* **sideLeftBack** (2)<br>
* **sideRightFront** (3)<br>
* **sideRightBack** (4)<br>
* **back** (5)<br>
**Categories:** Basic information
```asn1
ObjectFace ::= ENUMERATED {
front (0),
sideLeftFront (1),
sideLeftBack (2),
sideRightFront (3),
sideRightBack (4),
back (5)
}
```
### <a name="OpeningDaysHours"></a>OpeningDaysHours
This DE represents a time period to describe the opening days and hours of a Point of Interest.
**Categories:** Basic information
```asn1
OpeningDaysHours ::= UTF8String
```
### <a name="OrdinalNumber1B"></a>OrdinalNumber1B
The DE represents an ordinal number that indicates the position of an element in a set.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
The DE represents an ordinal number that indicates the position of an element in a set.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```
### <a name="OtherSubClass"></a>OtherSubClass
This DE indicates the subclass of a detected object for [**ObjectClass**](#ObjectClass) "otherSubclass".
- `0` - unknown - if the subclass is unknown.
- `1` - singleObject - if the object is a single object.
- `2` - multipleObjects - if the object is a group of multiple objects.
- `3` - bulkMaterial - if the object is a bulk material.
* **unknown** (0)<br>
* **singleObject** (1)<br>
* **multipleObjects** (2)<br>
* **bulkMaterial** (3)<br>
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
singleObject (1),
multipleObjects (2),
bulkMaterial (3)
} (0..255)
```
### <a name="PathDeltaTime"></a>PathDeltaTime
This DE represents the recorded or estimated travel time between a position and a predefined reference position.
**Categories:** Basic information
This DE indicates an ordinal number that represents the position of a component in the list of [**Traces**](#Traces) or [**TracesExtended**](#TracesExtended).
The value shall be set to:
- `0` - noPath - if no path is identified
- `1..7` - for instances 1..7 of [**Traces**](#Traces)
- `8..14` - for instances 1..7 of [**TracesExtended**](#TracesExtended).
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
Values:
* **noPath** (0)<br>
* **path1** (1)<br>
* **path2** (2)<br>
* **path3** (3)<br>
* **path4** (4)<br>
* **path5** (5)<br>
* **path6** (6)<br>
* **path7** (7)<br>
* **pathExtended1** (8)<br>
* **pathExtended2** (9)<br>
* **pathExtended3** (10)<br>
* **pathExtended4** (11)<br>
* **pathExtended5** (12)<br>
* **pathExtended6** (13)<br>
* **pathExtended7** (14)<br>
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
PathId ::= INTEGER {
noPath (0),
path1 (1),
path2 (2),
path3 (3),
path4 (4),
path5 (5),
path6 (6),
path7 (7),
pathExtended1 (8),
pathExtended2 (9),
pathExtended3 (10),
pathExtended4 (11),
pathExtended5 (12),
pathExtended6 (13),
pathExtended7 (14)
} (0..14)
```
### <a name="PerformanceClass"></a>PerformanceClass
This DE denotes the ability of an ITS-S to provide up-to-date information.
A performance class value is used to describe age of data. The exact values are out of scope of the present document.
The value shall be set to:
- `0` if the performance class is unknown,
- `1` for performance class A as defined in ETSI TS 101 539-1 [[5]](#references),
- `2` for performance class B as defined in ETSI TS 101 539-1 [[5]](#references),
- 3-7 reserved for future use.
* **unavailable** (0)<br>
* **performanceClassA** (1)<br>
* **performanceClassB** (2)<br>
**Categories:** Vehicle information
**Revision:** _Editorial update in V2.1.1_
```asn1
PerformanceClass ::= INTEGER {
unavailable (0),
performanceClassA (1),
performanceClassB (2)
} (0..7)
```
### <a name="PhoneNumber"></a>PhoneNumber
**Categories:** Basic information
```asn1
PhoneNumber ::= NumericString (SIZE(1..16))
```
### <a name="PosCentMass"></a>PosCentMass
This DE indicates the perpendicular distance from the centre of mass of an empty load vehicle to the front line of
the vehicle bounding box of the empty load vehicle.
The value shall be set to:
- `n` (`n > 0` and `n < 62`) for any aplicable value n between 0,1 metre and 6,2 metres,
- `62` for values equal to or higher than 6.1 metres,
- `63` if the information is unavailable.
* **tenCentimetres** (1)<br>
* **outOfRange** (62)<br>
* **unavailable** (63)<br>
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 62 has changed slightly)_
NOTE: The empty load vehicle is defined in ISO 1176 [[8]](#references), clause 4.6.
outOfRange (62),
unavailable (63)
} (1..63)
```
### <a name="PositioningSolutionType"></a>PositioningSolutionType
This DE indicates the positioning technology being used to estimate a geographical position.
- 0 `noPositioningSolution` - no positioning solution used,
- 1 `sGNSS` - Global Navigation Satellite System used,
- 2 `dGNSS` - Differential GNSS used,
- 3 `sGNSSplusDR` - GNSS and dead reckoning used,
- 4 `dGNSSplusDR` - Differential GNSS and dead reckoning used,
- 5 `dR` - dead reckoning used,
- 6 `manuallyByOperator` - position set manually by a human operator.
* **noPositioningSolution** (0)<br>
* **sGNSS** (1)<br>
* **dGNSS** (2)<br>
* **sGNSSplusDR** (3)<br>
* **dGNSSplusDR** (4)<br>
* **dR** (5)<br>
**Categories:** GeoReference information
**Revision:** _V1.3.1, extension with value 6 added in V2.2.1_
```asn1
PositioningSolutionType ::= ENUMERATED {
noPositioningSolution (0),
sGNSS (1),
dGNSS (2),
sGNSSplusDR (3),
dGNSSplusDR (4),
dR (5),
}
```
### <a name="PositionOfOccupants"></a>PositionOfOccupants
This DE indicates whether a passenger seat is occupied or whether the occupation status is detectable or not.
The number of row in vehicle seats layout is counted in rows from the driver row backwards from front to the rear
of the vehicle.
The left side seat of a row refers to the left hand side seen from vehicle rear to front.
Additionally, a bit is reserved for each seat row, to indicate if the seat occupation of a row is detectable or not,
i.e. `row1NotDetectable (3)`, `row2NotDetectable(8)`, `row3NotDetectable(13)` and `row4NotDetectable(18)`.
Finally, a bit is reserved for each row seat to indicate if the seat row is present or not in the vehicle,
i.e. `row1NotPresent (4)`, `row2NotPresent (9)`, `row3NotPresent(14)`, `row4NotPresent(19)`.
When a seat is detected to be occupied, the corresponding seat occupation bit shall be set to `1`.
For example, when the row 1 left seat is occupied, `row1LeftOccupied(0)` bit shall be set to `1`.
When a seat is detected to be not occupied, the corresponding seat occupation bit shall be set to `0`.
Otherwise, the value of seat occupation bit shall be set according to the following conditions:
- If the seat occupation of a seat row is not detectable, the corresponding bit shall be set to `1`.
When any seat row not detectable bit is set to `1`, all corresponding seat occupation bits of the same row
shall be set to `1`.
- If the seat row is not present, the corresponding not present bit of the same row shall be set to `1`.
When any of the seat row not present bit is set to `1`, the corresponding not detectable bit for that row
shall be set to `1`, and all the corresponding seat occupation bits in that row shall be set to `0`.
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
* **row1LeftOccupied** (0)<br>
* **row1RightOccupied** (1)<br>
* **row1MidOccupied** (2)<br>
* **row1NotDetectable** (3)<br>
* **row1NotPresent** (4)<br>
* **row2LeftOccupied** (5)<br>
* **row2RightOccupied** (6)<br>
* **row2MidOccupied** (7)<br>
* **row2NotDetectable** (8)<br>
* **row2NotPresent** (9)<br>
* **row3LeftOccupied** (10)<br>
* **row3RightOccupied** (11)<br>
* **row3MidOccupied** (12)<br>
* **row3NotDetectable** (13)<br>
* **row3NotPresent** (14)<br>
* **row4LeftOccupied** (15)<br>
* **row4RightOccupied** (16)<br>
* **row4MidOccupied** (17)<br>
* **row4NotDetectable** (18)<br>
* **row4NotPresent** (19)<br>
**Categories:** Vehicle information
3514
3515
3516
3517
3518
3519
3520
3521
3522
3523
3524
3525
3526
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537
3538
3539
```asn1
PositionOfOccupants ::= BIT STRING {
row1LeftOccupied (0),
row1RightOccupied (1),
row1MidOccupied (2),
row1NotDetectable (3),
row1NotPresent (4),
row2LeftOccupied (5),
row2RightOccupied (6),
row2MidOccupied (7),
row2NotDetectable (8),
row2NotPresent (9),
row3LeftOccupied (10),
row3RightOccupied (11),
row3MidOccupied (12),
row3NotDetectable (13),
row3NotPresent (14),
row4LeftOccupied (15),
row4RightOccupied (16),
row4MidOccupied (17),
row4NotDetectable (18),
row4NotPresent (19)
} (SIZE(20))
```
### <a name="PosFrontAx"></a>PosFrontAx
This DE indicates the perpendicular distance between the vehicle front line of the bounding box and the front wheel axle in 0,1 metre.
- `n` (`n > 0` and `n < 19`) for any aplicable value between 0,1 metre and 1,9 metres,
- `19` for values equal to or higher than 1.8 metres,
- `20` if the information is unavailable.
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 19 has changed slightly)_
```asn1
PosFrontAx ::= INTEGER {
outOfRange (19),
unavailable(20)
} (1..20)
```
3562
3563
3564
3565
3566
3567
3568
3569
3570
3571
3572
3573
3574
3575
3576
3577
3578
3579
3580
3581
3582
3583
3584
### <a name="Position1d"></a>Position1d
This DE represents a position along a single dimension such as the middle of a road or lane, measured as an offset from an externally defined starting point,
in direction of an externally defined reference direction.
The value shall be set to:
- `n` (`n ≥ -8190` and `n < 0`) if the position is equal to or less than n x 1 metre and more than (n-1) x 1 metre, in opposite direction of the reference direction,
- `0` if the position is at the starting point,
- `n` (`n > 0` and `n < 8190`) if the position is equal to or less than n x 1 metre and more than (n-1) x 1 metre, in the same direction as the reference direction,
- `8 190` if the position is out of range, i.e. equal to or greater than 8 189 m,
- `8 191` if the position information is not available.
**Unit:** _1 metre_
**Categories:** GeoReference information
**Revision:** _Created in V2.2.1_
```asn1
Position1d ::= INTEGER {
outOfRange(8190),
unavailable(8191)
}(-8190..8191)
```
This DE represents the distance from the centre of vehicle front bumper to the right or left longitudinal carrier of vehicle.
The left/right carrier refers to the left/right as seen from a passenger sitting in the vehicle.
The value shall be set to:
- `n` (`n > 0` and `n < 126`) for any aplicable value between 0,01 metre and 1,26 metres,
- `126` for values equal to or higher than 1.25 metres,
- `127` if the information is unavailable.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 126 has changed slightly)_
```asn1
PosLonCarr ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="PosPillar"></a>PosPillar
This DE represents the perpendicular inter-distance of neighbouring pillar axis of vehicle starting from the
middle point of the front line of the vehicle bounding box.
The value shall be set to:
- `n` (`n > 0` and `n < 29`) for any aplicable value between 0,1 metre and 2,9 metres,
- `29` for values equal to or greater than 2.8 metres,
- `30` if the information is unavailable.
* **outOfRange** (29)<br>
* **unavailable** (30)<br>
**Categories:** Vehicle information
**Revision:** _description revised in V2.1.1 (the meaning of 29 has changed slightly)_
```asn1
PosPillar ::= INTEGER {
outOfRange (29),
unavailable (30)
} (1..30)
```
### <a name="PostCrashSubCauseCode"></a>PostCrashSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `postCrash` .
- 0 `unavailable` - in case further detailed information on post crash event is unavailable,
- 1 `accidentWithoutECallTriggered` - in case no eCall has been triggered for an accident,
- 2 `accidentWithECallManuallyTriggered` - in case eCall has been manually triggered and transmitted to eCall back end,
- 3 `accidentWithECallAutomaticallyTriggered` - in case eCall has been automatically triggered and transmitted to eCall back end,
- 4 `accidentWithECallTriggeredWithoutAccessToCellularNetwork` - in case eCall has been triggered but cellular network is not accessible from triggering vehicle.
* **unavailable** (0)<br>
* **accidentWithoutECallTriggered** (1)<br>
* **accidentWithECallManuallyTriggered** (2)<br>
* **accidentWithECallAutomaticallyTriggered** (3)<br>
* **accidentWithECallTriggeredWithoutAccessToCellularNetwork** (4)<br>
**Categories:** Traffic information
```asn1
PostCrashSubCauseCode ::= INTEGER {
unavailable (0),
accidentWithoutECallTriggered (1),
accidentWithECallManuallyTriggered (2),
accidentWithECallAutomaticallyTriggered (3),
accidentWithECallTriggeredWithoutAccessToCellularNetwork (4)
} (0..255)
```
### <a name="PrecipitationIntensity"></a>PrecipitationIntensity
This DE represent the total amount of rain falling during one hour. It is measured in mm per hour at an area of 1 square metre.
- `n` (`n > 0` and `n < 2000`) if the amount of rain falling is equal to or less than n x 0,1 mm/h and greater than (n-1) x 0,1 mm/h,
- `2000` if the amount of rain falling is greater than 199.9 mm/h,
- `2001` if the information is not available.
* **outOfRange** (2000)<br>
* **unavailable** (2001)<br>
**Categories:** Basic Information
**Revision:** _created in V2.1.1_
```asn1
PrecipitationIntensity ::= INTEGER {
outOfRange (2000),
unavailable (2001)
} (1..2001)
```
This DE represents the indentifier of a protected communication zone.
**Categories:** Infrastructure information Communication information
**Revision:** _Revision in V2.1.1 (changed name from ProtectedZoneID to ProtectedZoneId)_
```
### <a name="ProtectedZoneRadius"></a>ProtectedZoneRadius
This DE represents the radius of a protected communication zone.
**Categories:** Infrastructure information Communication information
```asn1
ProtectedZoneRadius ::= INTEGER (1..255,...)
```
### <a name="ProtectedZoneType"></a>ProtectedZoneType
This DE indicates the type of a protected communication zone, so that an ITS-S is aware of the actions to do
while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station).
The protected zone type is defined in ETSI TS 102 792 [[14]](#references).
* **permanentCenDsrcTolling** (0)<br>
* **temporaryCenDsrcTolling** (1)<br>
**Categories:** Communication information
```asn1
ProtectedZoneType::= ENUMERATED {
permanentCenDsrcTolling (0),
...,
temporaryCenDsrcTolling (1)
}
```
### <a name="PtActivationData"></a>PtActivationData
This DE is used for various tasks in the public transportation environment, especially for controlling traffic
signal systems to prioritize and speed up public transportation in urban area (e.g. intersection "_bottlenecks_").
The traffic lights may be controlled by an approaching bus or tram automatically. This permits "_In Time_" activation
of the green phase, will enable the individual traffic to clear a potential traffic jam in advance. Thereby the
approaching bus or tram may pass an intersection with activated green light without slowing down the speed due to
traffic congestion. Other usage of the DE is the provision of information like the public transport line number
or the schedule delay of a public transport vehicle.
**Categories:** Vehicle information
```asn1
PtActivationData ::= OCTET STRING (SIZE(1..20))
```
### <a name="PtActivationType"></a>PtActivationType
This DE indicates a certain coding type of the PtActivationData data.
- 0 `undefinedCodingType` : undefined coding type,
- 1 `r09-16CodingType` : coding of PtActivationData conform to VDV recommendation 420 [[7]](#references),
- 2 `vdv-50149CodingType` : coding of PtActivationData based on VDV recommendation 420 [[7]](#references).
- 3 - 255 : reserved for alternative and future use.
* **undefinedCodingType** (0)<br>
* **r09-16CodingType** (1)<br>
* **vdv-50149CodingType** (2)<br>
**Categories:** Vehicle information
```asn1
PtActivationType ::= INTEGER {
undefinedCodingType (0),
r09-16CodingType (1),
vdv-50149CodingType (2)
} (0..255)
```
### <a name="RailwayLevelCrossingSubCauseCode"></a>RailwayLevelCrossingSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `railwayLevelCrossing` .
- 0 `unavailable` - in case no further detailed information on the railway level crossing status is available,
- 1 `doNotCrossAbnormalSituation` - in case when something wrong is detected by equation or sensors of the railway level crossing,
including level crossing is closed for too long (e.g. more than 10 minutes long ; default value),
- 2 `closed` - in case the crossing is closed (barriers down),
- 3 `unguarded` - in case the level crossing is unguarded (i.e a Saint Andrew cross level crossing without detection of train),
- 4 `nominal` - in case the barriers are up and lights are off.
* **unavailable** (0)<br>
* **doNotCrossAbnormalSituation** (1)<br>
* **closed** (2)<br>
* **unguarded** (3)<br>
* **nominal** (4)<br>
**Categories:** Traffic information
```asn1
RailwayLevelCrossingSubCauseCode ::= INTEGER {
unavailable (0),
doNotCrossAbnormalSituation (1),
closed (2),
unguarded (3),
nominal (4)
} (0..255)
```
### <a name="RelevanceDistance"></a>RelevanceDistance
This DE describes a distance of relevance for information indicated in a message.
- 0 `lessThan50m` - for distances below 50 m,
- 1 `lessThan100m` - for distances below 100 m,
- 2 `lessThan200m` - for distances below 200 m,
- 3 `lessThan500m` - for distances below 300 m,
- 4 `lessThan1000m` - for distances below 1 000 m,
- 5 `lessThan5km` - for distances below 5 000 m,
- 6 `lessThan10km` - for distances below 10 000 m,
- 7 `over10km` - for distances over 10 000 m.
**Categories:** GeoReference information
**Revision:** _Editorial update in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**StandardLength3b**](#StandardLength3b) instead.
```asn1
RelevanceDistance ::= ENUMERATED {
lessThan50m(0),
lessThan100m(1),
lessThan200m(2),
lessThan500m(3),
lessThan1000m(4),
lessThan5km(5),
lessThan10km(6),
over10km(7)
}
```
### <a name="RelevanceTrafficDirection"></a>RelevanceTrafficDirection
This DE indicates a traffic direction that is relevant to information indicated in a message.
- 0 `allTrafficDirections` - for all traffic directions,
- 1 `upstreamTraffic` - for upstream traffic,
- 2 `downstreamTraffic` - for downstream traffic,
- 3 `oppositeTraffic` - for traffic in the opposite direction.
The terms `upstream`, `downstream` and `oppositeTraffic` are relative to the event position.
**Categories:** GeoReference information
**Revision:** _Editorial update in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrafficDirection**](#TrafficDirection) instead.
```asn1
RelevanceTrafficDirection ::= ENUMERATED {
allTrafficDirections(0),
upstreamTraffic(1),
downstreamTraffic(2),
oppositeTraffic(3)
}
```
### <a name="RequestResponseIndication"></a>RequestResponseIndication
This DE indicates whether an ITS message is transmitted as request from ITS-S or a response transmitted from
ITS-S after receiving request from other ITS-Ss.
The value shall be set to:
- 0 `request` - for a request message,
- 1 `response` - for a response message.
* **request** (0)<br>
* **response** (1)<br>
**Categories:** Communication information
**Revision:** _Editorial update in V2.1.1_
```asn1
RequestResponseIndication ::= ENUMERATED {
request (0),
response (1)
}
```
### <a name="RescueAndRecoveryWorkInProgressSubCauseCode"></a>RescueAndRecoveryWorkInProgressSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `rescueAndRecoveryWorkInProgress`
- 0 `unavailable` - in case further detailed information on rescue and recovery work is unavailable,
- 1 `emergencyVehicles` - in case rescue and/or safeguarding work is ongoing by emergency vehicles, i.e. by vehicles that have the absolute right of way,
- 2 `rescueHelicopterLanding` - in case rescue helicopter is landing,
- 3 `policeActivityOngoing` - in case police activity is ongoing (only to be used if a more specific sub cause than (1) is needed),
- 4 `medicalEmergencyOngoing` - in case medical emergency recovery is ongoing (only to be used if a more specific sub cause than (1) is needed),
- 5 `childAbductionInProgress` - in case a child kidnapping alarm is activated and rescue work is ongoing (only to be used if a more specific sub cause than (1) is needed),
- 6 `prioritizedVehicle` - in case rescue and/or safeguarding work is ongoing by prioritized vehicles, i.e. by vehicles that have priority but not the absolute right of way,
- 7 `rescueAndRecoveryVehicle` - in case technical rescue work is ongoing by rescue and recovery vehicles.
- 8-255: reserved for future usage.
* **unavailable** (0)<br>
* **emergencyVehicles** (1)<br>
* **rescueHelicopterLanding** (2)<br>
* **policeActivityOngoing** (3)<br>
* **medicalEmergencyOngoing** (4)<br>
* **childAbductionInProgress** (5)<br>
* **prioritizedVehicle** (6)<br>
* **rescueAndRecoveryVehicle** (7)<br>
**Categories:** Traffic information
**Revision:** _V1.3.1, named values 6 and 7 added in V2.2.1_
```asn1
RescueAndRecoveryWorkInProgressSubCauseCode ::= INTEGER {
unavailable (0),
emergencyVehicles (1),
rescueHelicopterLanding (2),
policeActivityOngoing (3),
medicalEmergencyOngoing (4),
childAbductionInProgress (5),
prioritizedVehicle (6),
rescueAndRecoveryVehicle (7)
### <a name="RoadSectionId"></a>RoadSectionId
This DE indicates an ordinal number that represents the position of a component in the list [**RoadConfigurationSectionList**](#RoadConfigurationSectionList).
The value shall be set to:
- `0` - if no road section is identified
- `1..8` - for instances 1..8 of [**RoadConfigurationSectionList**](#RoadConfigurationSectionList)
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
RoadSectionId::= INTEGER (0..8, ...)
```
- 0 `urban-NoStructuralSeparationToOppositeLanes` - for an urban road with no structural separation between lanes carrying traffic in opposite directions,
- 1 `urban-WithStructuralSeparationToOppositeLanes` - for an urban road with structural separation between lanes carrying traffic in opposite directions,
- 2 `nonUrban-NoStructuralSeparationToOppositeLanes` - for an non urban road with no structural separation between lanes carrying traffic in opposite directions,
- 3 `nonUrban-WithStructuralSeparationToOppositeLanes` - for an non urban road with structural separation between lanes carrying traffic in opposite directions.
* **urban-NoStructuralSeparationToOppositeLanes** (0)<br>
* **urban-WithStructuralSeparationToOppositeLanes** (1)<br>
* **nonUrban-NoStructuralSeparationToOppositeLanes** (2)<br>
* **nonUrban-WithStructuralSeparationToOppositeLanes** (3)<br>
**Categories:** Road Topology Information
**Revision:** _Editorial update in V2.1.1_
```asn1
RoadType ::= ENUMERATED {
urban-NoStructuralSeparationToOppositeLanes (0),
urban-WithStructuralSeparationToOppositeLanes (1),
nonUrban-NoStructuralSeparationToOppositeLanes (2),
nonUrban-WithStructuralSeparationToOppositeLanes (3)
}
```
### <a name="RoadworksSubCauseCode"></a>RoadworksSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `roadworks`.
- 0 `unavailable` - in case further detailed information on roadworks is unavailable,
- 1 `majorRoadworks` - in case a major roadworks is ongoing,
- 2 `roadMarkingWork` - in case a road marking work is ongoing,
- 3 `slowMovingRoadMaintenance` - in case slow moving road maintenance work is ongoing,
- 4 `shortTermStationaryRoadworks`- in case a short term stationary roadwork is ongoing,
- 5 `streetCleaning` - in case a vehicle street cleaning work is ongoing,
- 6 `winterService` - in case winter service work is ongoing.
* **unavailable** (0)<br>
* **majorRoadworks** (1)<br>
* **roadMarkingWork** (2)<br>
* **slowMovingRoadMaintenance** (3)<br>
* **shortTermStationaryRoadworks** (4)<br>
* **streetCleaning** (5)<br>
* **winterService** (6)<br>
**Categories:** Traffic information
```asn1
RoadworksSubCauseCode ::= INTEGER {
unavailable (0),
majorRoadworks (1),
roadMarkingWork (2),
slowMovingRoadMaintenance (3),
shortTermStationaryRoadworks (4),
streetCleaning (5),
winterService (6)
} (0..255)
```
### <a name="SafeDistanceIndicator"></a>SafeDistanceIndicator
- `FALSE` if the triple {LaD, LoD, VD} < {MSLaD, MSLoD, MSVD} is simultaneously satisfied with confidence level of 90 % or more,
- `TRUE` otherwise.
**Categories:** Traffic information Kinematic information
**Revision:** _created in V2.1.1_
NOTE: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD)
and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD).
```asn1
SafeDistanceIndicator::= BOOLEAN
```
### <a name="SemiAxisLength"></a>SemiAxisLength
This DE indicates the horizontal position confidence value which represents the estimated absolute position accuracy, in one of the axis direction as defined in a shape of ellipse with a
confidence level of 95 %.
The value shall be set to:
- `n` (`n > 0` and `n < 4 094`) if the accuracy is equal to or less than n * 0,01 metre,
- `4 094` if the accuracy is out of range, i.e. greater than 4,093 m,
- `4 095` if the accuracy information is unavailable.
* **doNotUse** (0)<br>
* **outOfRange** (4094)<br>
* **unavailable** (4095)<br>
**Categories:** GeoReference Information
**Revision:** _Description revised in V2.1.1_
NOTE: The fact that a position coordinate value is received with confidence value set to `unavailable(4095)`.
can be caused by several reasons, such as:
- the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
- the sensor cannot calculate the accuracy due to lack of variables, or
- there has been a vehicle bus (e.g. CAN bus) error.
In all 3 cases above, the position coordinate value may be valid and used by the application.
If a position coordinate value is received and its confidence value is set to `outOfRange(4094)`, it means that
the position coordinate value is not valid and therefore cannot be trusted. Such value is not useful
outOfRange (4094),
unavailable (4095)
} (0..4095)
```
### <a name="SensorType"></a>SensorType
- 0 `undefined` - in case the sensor type is undefined.
- 1 `radar` - in case the sensor is a radar,
- 2 `lidar` - in case the sensor is a lidar,
- 3 `monovideo` - in case the sensor is mono video,
- 4 `stereovision` - in case the sensor is stereo vision,
- 5 `nightvision` - in case the sensor is night vision,
- 6 `ultrasonic` - in case the sensor is ultrasonic,
- 7 `pmd` - in case the sensor is photonic mixing device,
- 8 `inductionLoop` - in case the sensor is an induction loop,
- 9 `sphericalCamera` - in case the sensor is a spherical camera,
- 10 `uwb` - in case the sensor is ultra wide band,
- 11 `acoustic` - in case the sensor is acoustic,
- 12 `localAggregation` - in case the information is provided by a system that aggregates information from different local sensors. Aggregation may include fusion,
- 13 `itsAggregation` - in case the information is provided by a system that aggregates information from other received ITS messages.
* **undefined** (0)<br>
* **radar** (1)<br>
* **lidar** (2)<br>
* **monovideo** (3)<br>
* **stereovision** (4)<br>
* **nightvision** (5)<br>
* **ultrasonic** (6)<br>
* **pmd** (7)<br>
* **inductionLoop** (8)<br>
* **sphericalCamera** (9)<br>
* **uwb** (10)<br>
* **acoustic** (11)<br>
* **localAggregation** (12)<br>
* **itsAggregation** (13)<br>
**Categories:** Sensing Information
**Revision:** _created in V2.1.1_
undefined (0),
radar (1),
lidar (2),
monovideo (3),
stereovision (4),
nightvision (5),
ultrasonic (6),
pmd (7),
inductionLoop (8),
sphericalCamera (9),
uwb (10),
acoustic (11),
localAggregation (12),
itsAggregation (13)
4128
4129
4130
4131
4132
4133
4134
4135
4136
4137
4138
4139
4140
4141
4142
4143
4144
4145
4146
4147
4148
4149
4150
4151
4152
4153
4154
4155
4156
### <a name="SensorTypes"></a>SensorTypes
This DE indicates the type of sensor(s).
The corresponding bit shall be set to 1 under the following conditions:
- 0 `undefined` - in case the sensor type is undefined.
- 1 `radar` - in case the sensor is a radar,
- 2 `lidar` - in case the sensor is a lidar,
- 3 `monovideo` - in case the sensor is mono video,
- 4 `stereovision` - in case the sensor is stereo vision,
- 5 `nightvision` - in case the sensor is night vision,
- 6 `ultrasonic` - in case the sensor is ultrasonic,
- 7 `pmd` - in case the sensor is photonic mixing device,
- 8 `inductionLoop` - in case the sensor is an induction loop,
- 9 `sphericalCamera` - in case the sensor is a spherical camera,
- 10 `uwb` - in case the sensor is ultra wide band,
- 11 `acoustic` - in case the sensor is acoustic,
- 12 `localAggregation` - in case the information is provided by a system that aggregates information from different local sensors. Aggregation may include fusion,
- 13 `itsAggregation` - in case the information is provided by a system that aggregates information from other received ITS messages.
- 14-15 - are reserved for future usage.
Values:
* **undefined** (0)<br>
* **radar** (1)<br>
* **lidar** (2)<br>
* **monovideo** (3)<br>
* **stereovision** (4)<br>
* **nightvision** (5)<br>
* **ultrasonic** (6)<br>
* **pmd** (7)<br>
* **inductionLoop** (8)<br>
* **sphericalCamera** (9)<br>
* **uwb** (10)<br>
* **acoustic** (11)<br>
* **localAggregation** (12)<br>
* **itsAggregation** (13)<br>
**Categories:** Sensing Information
**Revision:** _created in V2.2.1_
>>>
NOTE: If all bits are set to 0, then no sensor type is used
>>>
```asn1
SensorTypes ::= BIT STRING {
undefined (0),
radar (1),
lidar (2),
monovideo (3),
stereovision (4),
nightvision (5),
ultrasonic (6),
pmd (7),
inductionLoop (8),
sphericalCamera (9),
uwb (10),
acoustic (11),
localAggregation (12),
itsAggregation (13)
**Categories:** Basic information
```asn1
SequenceNumber ::= INTEGER (0..65535)
```
### <a name="SignalViolationSubCauseCode"></a>SignalViolationSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `signalViolation`.
- 0 `unavailable` - in case further detailed information on signal violation event is unavailable,
- 1 `stopSignViolation` - in case a stop sign violation is detected,
- 2 `trafficLightViolation` - in case a traffic light violation is detected,
- 3 `turningRegulationViolation`- in case a turning regulation violation is detected.
* **unavailable** (0)<br>
* **stopSignViolation** (1)<br>
* **trafficLightViolation** (2)<br>
* **turningRegulationViolation** (3)<br>
**Categories:** Traffic information
```asn1
SignalViolationSubCauseCode ::= INTEGER {
unavailable (0),
stopSignViolation (1),
trafficLightViolation (2),
turningRegulationViolation (3)
} (0..255)
```
### <a name="SlowVehicleSubCauseCode"></a>SlowVehicleSubCauseCode
This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) "slowVehicle".
- 0 `unavailable` - in case further detailed information on slow vehicle driving event is
- 1 `maintenanceVehicle` - in case of a slow driving maintenance vehicle on the road,
- 2 `vehiclesSlowingToLookAtAccident`- in case vehicle is temporally slowing down to look at accident, spot, etc.,
- 3 `abnormalLoad` - in case an abnormal loaded vehicle is driving slowly on the road,
- 4 `abnormalWideLoad` - in case an abnormal wide load vehicle is driving slowly on the road,
- 5 `convoy` - in case of slow driving convoy on the road,
- 6 `snowplough` - in case of slow driving snow plough on the road,
- 7 `deicing` - in case of slow driving de-icing vehicle on the road,
- 8 `saltingVehicles` - in case of slow driving salting vehicle on the road.
* **unavailable** (0)<br>
* **maintenanceVehicle** (1)<br>
* **vehiclesSlowingToLookAtAccident** (2)<br>
* **abnormalLoad** (3)<br>
* **abnormalWideLoad** (4)<br>
* **convoy** (5)<br>
* **snowplough** (6)<br>
* **deicing** (7)<br>
* **saltingVehicles** (8)<br>
**Categories:** Traffic information
```asn1
SlowVehicleSubCauseCode ::= INTEGER {
unavailable (0),
maintenanceVehicle (1),
vehiclesSlowingToLookAtAccident (2),
abnormalLoad (3),
abnormalWideLoad (4),
convoy (5),
snowplough (6),
deicing (7),
saltingVehicles (8)
} (0..255)
```
### <a name="SpecialTransportType"></a>SpecialTransportType
The DE indicates if a vehicle is carrying goods in the special transport conditions.
The corresponding bit shall be set to 1 under the following conditions:
- 0 `heavyLoad` - the vehicle is carrying goods with heavy load,
- 1 `excessWidth` - the vehicle is carrying goods in excess of width,
- 2 `excessLength` - the vehicle is carrying goods in excess of length,
- 3 `excessHeight` - the vehicle is carrying goods in excess of height.
Otherwise, the corresponding bit shall be set to 0.
* **heavyLoad** (0)<br>
* **excessWidth** (1)<br>
* **excessLength** (2)<br>
* **excessHeight** (3)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
```asn1
SpecialTransportType ::= BIT STRING {
heavyLoad (0),
excessWidth (1),
excessLength (2),
excessHeight (3)
} (SIZE(4))
```
### <a name="SpeedConfidence"></a>SpeedConfidence
This DE indicates the speed confidence value which represents the estimated absolute accuracy of a speed value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n > 0` and `n < 126`) if the confidence value is equal to or less than n * 0,01 m/s.
- `126` if the confidence value is out of range, i.e. greater than 1,25 m/s,
- `127` if the confidence value information is not available.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: If a speed value is received and its confidence value is set to `outOfRange(126)`, it means that the speed value is not valid
and therefore cannot be trusted. Such is not useful for the application.
>>>
```asn1
SpeedConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="SpeedLimit"></a>SpeedLimit
This DE represents a speed limitation applied to a geographical position, a road section or a geographical region.
**Categories:** Infrastructure information Traffic information
```asn1
SpeedLimit ::= INTEGER (1..255)
```
### <a name="SpeedValue"></a>SpeedValue
This DE represents a speed value, i.e. the magnitude of the velocity-vector.
- `0` in a standstill situation.
- `n` (`n > 0` and `n < 16 382`) if the applicable value is equal to or less than n x 0,01 m/s, and greater than (n-1) x 0,01 m/s,
- `16 382` for speed values greater than 163,81 m/s,
- `16 383` if the speed accuracy information is not available.
* **standstill** (0)<br>
* **outOfRange** (16382)<br>
* **unavailable** (16383)<br>
**Categories:** Kinematic information
**Revision:** _Description revised in V2.1.1 (the meaning of 16382 has changed slightly)_
NOTE: the definition of standstill is out of scope of the present document.
```asn1
SpeedValue ::= INTEGER {
standstill (0),
outOfRange (16382),
unavailable (16383)
} (0..16383)
```
### <a name="StoredInformationType"></a>StoredInformationType
This DE indicates the type of stored information.
The corresponding bit shall be set to 1 under the following conditions:
- `0` undefined - in case the stored information type is undefined.
- `1` staticDb - in case the stored information type is a static database.
- `2` dynamicDb - in case the stored information type is a dynamic database
- `3` realTimeDb - in case the stored information type is a real time updated database.
- `4` map - in case the stored information type is a road topology map.
4388
4389
4390
4391
4392
4393
4394
4395
4396
4397
4398
4399
4400
4401
4402
4403
4404
4405
4406
4407
4408
4409
4410
Values:
* **undefined** (0)<br>
* **staticDb** (1)<br>
* **dynamicDb** (2)<br>
* **realTimeDb** (3)<br>
* **map** (4)<br>
**Categories:** Basic Information
**Revision:** _created in V2.2.1_
>>>
NOTE: If all bits are set to 0, then no stored information type is used
>>>
```asn1
StoredInformationType::= BIT STRING {
undefined (0),
staticDb (1),
dynamicDb (2),
realTimeDb (3),
map (4)
### <a name="VelocityComponentValue"></a>VelocityComponentValue
This DE represents the value of a velocity component in a defined coordinate system.
- `-16 383` if the velocity is equal to or smaller than -163,83 m/s,
- `n` (`n > -16 383` and `n < 16 382`) if the applicable value is equal to or less than n x 0,01 m/s, and greater than (n-1) x 0,01 m/s,
- `16 382` for velocity values equal to or greater than 163,81 m/s,
- `16 383` if the velocity information is not available.
* **negativeOutOfRange** (-16383)<br>
* **positiveOutOfRange** (16382)<br>
* **unavailable** (16383)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
unavailable (16383)
} (-16383..16383)
```
### <a name="StabilityLossProbability"></a>StabilityLossProbability
This DE indicates the estimated probability of a stability level and conversely also the probability of a stability loss.
- `0` to indicate an estimated probability of a loss of stability of 0 %, i.e. "stable",
- `n` (`n > 0` and `n < 50`) to indicate the actual stability level,
- `50` to indicate a estimated probability of a loss of stability of 100 %, i.e. "total loss of stability",
- the values between 51 and 62 are reserved for future use,
- `63`: this value indicates that the information is unavailable.
* **stable** (0)<br>
* **totalLossOfStability** (50)<br>
* **unavailable** (63)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
StabilityLossProbability ::= INTEGER {
stable (0),
totalLossOfStability (50),
unavailable (63)
} (0..63)
```
### <a name="StandardLength12b"></a>StandardLength12b
The DE represents length as a measure of distance between points or as a dimension of an object or shape.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength12b::= INTEGER (0..4095)
```
### <a name="StandardLength3b"></a>StandardLength3b
The DE represents length as a measure of distance between points.
- 0 `lessThan50m` - for distances below 50 m,
- 1 `lessThan100m` - for distances below 100 m,
- 2 `lessThan200m` - for distances below 200 m,
- 3 `lessThan500m` - for distances below 300 m,
- 4 `lessThan1000m` - for distances below 1 000 m,
- 5 `lessThan5km` - for distances below 5 000 m,
- 6 `lessThan10km` - for distances below 10 000 m,
- 7 `over10km` - for distances over 10 000 m.
* **lessThan50m** (0)<br>
* **lessThan100m** (1)<br>
* **lessThan200m** (2)<br>
* **lessThan500m** (3)<br>
* **lessThan1000m** (4)<br>
* **lessThan5km** (5)<br>
* **lessThan10km** (6)<br>
* **over10km** (7)<br>
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1 from RelevanceDistance_
```asn1
StandardLength3b ::= ENUMERATED {
lessThan50m (0),
lessThan100m (1),
lessThan200m (2),
lessThan500m (3),
lessThan1000m (4),
lessThan5km (5),
lessThan10km (6),
over10km (7)
}
```
### <a name="StandardLength9b"></a>StandardLength9b
The DE represents length as a measure of distance between points or as a dimension of an object.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength9b::= INTEGER (0..511)
```
### <a name="StandardLength1B"></a>StandardLength1B
The DE represents length as a measure of distance between points or as a dimension of an object.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength1B::= INTEGER (0..255)
```
### <a name="StandardLength2B"></a>StandardLength2B
The DE represents length as a measure of distance between points or as a dimension of an object.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
StandardLength2B::= INTEGER (0..65535)
```
### <a name="StationarySince"></a>StationarySince
This DE indicates the duration in minutes since which something is stationary.
- 0 `lessThan1Minute` - for being stationary since less than 1 minute,
- 1 `lessThan2Minutes` - for being stationary since less than 2 minute and for equal to or more than 1 minute,
- 2 `lessThan15Minutes` - for being stationary since less than 15 minutes and for equal to or more than 1 minute,
- 3 `equalOrGreater15Minutes` - for being stationary since equal to or more than 15 minutes.
* **lessThan1Minute** (0)<br>
* **lessThan2Minutes** (1)<br>
* **lessThan15Minutes** (2)<br>
* **equalOrGreater15Minutes** (3)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
StationarySince ::= ENUMERATED {
lessThan1Minute (0),
lessThan2Minutes (1),
lessThan15Minutes (2),
equalOrGreater15Minutes (3)
}
```
### <a name="StationaryVehicleSubCauseCode"></a>StationaryVehicleSubCauseCode
This DE provides the value of the sub cause codes of the [**CauseCode**](#CauseCode) "stationaryVehicle".
- 0 `unavailable` - in case further detailed information on stationary vehicle is unavailable,
- 1 `humanProblem` - in case stationary vehicle is due to health problem of driver or passenger,
- 2 `vehicleBreakdown` - in case stationary vehicle is due to vehicle break down,
- 3 `postCrash` - in case stationary vehicle is caused by collision,
- 4 `publicTransportStop` - in case public transport vehicle is stationary at bus stop,
- 5 `carryingDangerousGoods`- in case the stationary vehicle is carrying dangerous goods,
- 6 `vehicleOnFire` - in case of vehicle on fire.
* **unavailable** (0)<br>
* **humanProblem** (1)<br>
* **vehicleBreakdown** (2)<br>
* **postCrash** (3)<br>
* **publicTransportStop** (4)<br>
* **carryingDangerousGoods** (5)<br>
* **vehicleOnFire** (6)<br>
**Categories:** Traffic information
```asn1
StationaryVehicleSubCauseCode ::= INTEGER {
unavailable (0),
humanProblem (1),
vehicleBreakdown (2),
postCrash (3),
publicTransportStop (4),
carryingDangerousGoods (5),
vehicleOnFire (6)
} (0..255)
```
The ITS-S ID may be a pseudonym. It may change over space and/or over time.
**Categories:** Basic information
**Revision:** _Created in V2.1.1 based on [**StationID**](#StationID)_
The ITS-S ID may be a pseudonym. It may change over space and/or over time.
**Categories:** Basic information
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**StationId**](#StationId) instead.
```asn1
StationID ::= INTEGER(0..4294967295)
```
This DE represents the type of technical context the ITS-S is integrated in.
The station type depends on the integration environment of ITS-S into vehicle, mobile devices or at infrastructure.
The value shall be set to:
- 0 `unknown` - information about the ITS-S context is not provided,
- 1 `pedestrian` - ITS-S carried by human being not using a mechanical device for their trip (VRU profile 1),
- 2 `cyclist` - ITS-S mounted on non-motorized unicycles, bicycles , tricycles, quadracycles (VRU profile 2),
- 3 `moped` - ITS-S mounted on light motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references)
- 4 `motorcycles` - ITS-S mounted on motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references)
- 5 `passengerCar` - ITS-S mounted on small passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class M1,
- 6 `bus` - ITS-S mounted on large passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class M2, M3,
- 7 `lightTruck` - ITS-S mounted on light Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class N1,
- 8 `heavyTruck` - ITS-S mounted on Heavy Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class N2 and N3,
- 9 `trailer` - ITS-S mounted on an unpowered vehicle that is intended to be towed by a powered vehicle as defined in
UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class O,
- 10 `specialVehicles` - ITS-S mounted on vehicles which have special purposes other than the above (e.g. moving road works vehicle),
- 11 `tram` - ITS-S mounted on a vehicle which runs on tracks along public streets,
- 12 `lightVruVehicle` - ITS-S carried by a human being traveling on light vehicle , incl. possible use of roller skates or skateboards (VRU profile 2),
- 13 `animal` - ITS-S carried by an animal presenting a safety risk to other road users e.g. domesticated dog in a city or horse (VRU Profile 4),
- 15 `roadSideUnit` - ITS-S mounted on an infrastructure typically positioned outside of the drivable roadway (e.g. on a gantry, on a pole,
on a stationary road works trailer); the infrastructure is static during the entire operation period of the ITS-S (e.g. no stop and go activity),
* **unknown** (0)<br>
* **pedestrian** (1)<br>
* **cyclist** (2)<br>
* **moped** (3)<br>
* **motorcycle** (4)<br>
* **passengerCar** (5)<br>
* **bus** (6)<br>
* **lightTruck** (7)<br>
* **heavyTruck** (8)<br>
* **trailer** (9)<br>
* **specialVehicle** (10)<br>
* **tram** (11)<br>
* **lightVruVehicle** (12)<br>
* **animal** (13)<br>
* **roadSideUnit** (15)<br>
**Categories:** Communication information.
**Revision:** _revised in V2.1.1 (named values 12 and 13 added and note to value 9 deleted)_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrafficParticipantType**](#TrafficParticipantType) instead.
```asn1
StationType ::= INTEGER {
unknown (0),
pedestrian (1),
cyclist (2),
moped (3),
motorcycle (4),
passengerCar (5),
bus (6),
lightTruck (7),
heavyTruck (8),
trailer (9),
tram (11),
lightVruVehicle (12),
animal (13),
roadSideUnit (15)
} (0..255)
```
### <a name="SteeringWheelAngleConfidence"></a>SteeringWheelAngleConfidence
This DE indicates the steering wheel angle confidence value which represents the estimated absolute accuracy for a steering wheel angle value with a confidence level of 95 %.
- `n` (`n > 0` and `n < 126`) if the confidence value is equal to or less than n x 1,5 degrees,
- `126` if the confidence value is out of range, i.e. greater than 187,5 degrees,
- `127` if the confidence value is not available.
If a steering wheel angle value is received and its confidence value is set to `outOfRange(126)`,
it means that the steering wheel angle value is not valid and therefore cannot be trusted.
Such value is not useful for the application.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle Information
**Revision:** _Description revised in V2.1.1_
NOTE: The fact that a steering wheel angle value is received with confidence value set to `unavailable(127)`
can be caused by several reasons, such as:
- the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
- the sensor cannot calculate the accuracy due to lack of variables, or
- there has been a vehicle bus (e.g. CAN bus) error.
In all 3 cases above, the steering wheel angle value may be valid and used by the application.
```asn1
SteeringWheelAngleConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="SteeringWheelAngleValue"></a>SteeringWheelAngleValue
This DE represents the steering wheel angle of the vehicle at certain point in time.
The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [[21]](#references), clause 2.11.
- `-511` if the steering wheel angle is equal to or greater than 511 x 1,5 degrees = 766,5 degrees to the right,
- `n` (`n > -511` and `n ≤ 0`) if the steering wheel angle is equal to or less than n x 1,5 degrees, and greater than (n-1) x 1,5 degrees,
- `n` (`n ≥ 1` and `n < 511`) if the steering wheel angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees,
- `511` if the steering wheel angle is greater than 510 x 1,5 degrees = 765 degrees to the left,
- `512` if information is not available.
* **negativeOutOfRange** (-511)<br>
* **positiveOutOfRange** (511)<br>
* **unavailable** (512)<br>
**Revision:** _Description revised in V2.1.1 (meaning of value 511 has changed slightly)._
```asn1
SteeringWheelAngleValue ::= INTEGER {
negativeOutOfRange (-511),
positiveOutOfRange (511),
unavailable (512)
} (-511..512)
```
### <a name="SubCauseCodeType"></a>SubCauseCodeType
This DE indicates the generic sub cause of a detected event.
**Categories:** Traffic information
**Revision:** _Description revised in V2.1.1 (this is the generic sub cause type)_
NOTE: The sub cause code value assignment varies based on value of [**CauseCode**](#CauseCode).
```asn1
SubCauseCodeType ::= INTEGER (0..255)
```
### <a name="Temperature"></a>Temperature
- `-60` for temperature equal to or less than -60 degrees C,
- `n` (`n > -60` and `n < 67`) for the actual temperature n in degrees C,
- `67` for temperature equal to or greater than 67 degrees C.
**Unit:** _degrees Celsius_
**Categories:** Basic information
**Revision:** _Editorial update in V2.1.1_
```asn1
Temperature ::= INTEGER {
equalOrSmallerThanMinus60Deg (-60),
equalOrGreaterThan67Deg(67)} (-60..67)
```
### <a name="TimestampIts"></a>TimestampIts
This DE represents the number of elapsed (TAI) milliseconds since the ITS Epoch.
The ITS epoch is `00:00:00.000 UTC, 1 January 2004`.
"Elapsed" means that the true number of milliseconds is continuously counted without interruption,
i.e. it is not altered by leap seconds, which occur in UTC.
EXAMPLE: The value for TimestampIts for 1 January 2007 00:00:00.000 UTC is `94 694 401 000` milliseconds,
which includes one leap second insertion since the ITS epoch.
**Categories:** Basic information
**Revision:** _Description revised in in V2.1.1_
NOTE: International Atomic Time (TAI) is the time reference coordinate on the basis of the readings of atomic clocks,
operated in accordance with the definition of the second, the unit of time of the International System of Units.
TAI is a continuous time scale. UTC has discontinuities, as it is occasionally adjusted by leap seconds.
As of 1 January, 2022, TimestampIts is 5 seconds ahead of UTC, because since the ITS epoch on 1 January 2004 00:00:00.000 UTC,
further 5 leap seconds have been inserted in UTC.
>>>
```asn1
TimestampIts ::= INTEGER (0..4398046511103)
```
### <a name="TrafficConditionSubCauseCode"></a>TrafficConditionSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `trafficCondition`.
- 0 `unavailable` - in case further detailed information on the traffic condition is unavailable,
- 1 `increasedVolumeOfTraffic` - in case the type of traffic condition is increased traffic volume,
- 2 `trafficJamSlowlyIncreasing` - in case the type of traffic condition is a traffic jam which volume is increasing slowly,
- 3 `trafficJamIncreasing` - in case the type of traffic condition is a traffic jam which volume is increasing,
- 4 `trafficJamStronglyIncreasing` - in case the type of traffic condition is a traffic jam which volume is strongly increasing,
- 5 `trafficJam` ` - in case the type of traffic condition is a traffic jam and no further detailed information about its volume is available,
- 6 `trafficJamSlightlyDecreasing` - in case the type of traffic condition is a traffic jam which volume is decreasing slowly,
- 7 `trafficJamDecreasing` - in case the type of traffic condition is a traffic jam which volume is decreasing,
- 8 `trafficJamStronglyDecreasing` - in case the type of traffic condition is a traffic jam which volume is decreasing rapidly,
- 9 `trafficJamStable` - in case the traffic condition is a traffic jam with stable volume,
- 10-255: reserved for future usage.
* **unavailable** (0)<br>
* **increasedVolumeOfTraffic** (1)<br>
* **trafficJamSlowlyIncreasing** (2)<br>
* **trafficJamIncreasing** (3)<br>
* **trafficJamStronglyIncreasing** (4)<br>
* **trafficJamSlightlyDecreasing** (6)<br>
* **trafficJamDecreasing** (7)<br>
* **trafficJamStronglyDecreasing** (8)<br>
**Categories:** Traffic information
**Revision:** _V1.3.1, definition of value 0 and 1 changed in V2.2.1, name and definition of value 5 changed in V2.2.1, value 9 added in V2.2.1_
```asn1
TrafficConditionSubCauseCode ::= INTEGER {
unavailable (0),
increasedVolumeOfTraffic (1),
trafficJamSlowlyIncreasing (2),
trafficJamIncreasing (3),
trafficJamStronglyIncreasing (4),
trafficJamSlightlyDecreasing (6),
trafficJamDecreasing (7),
trafficJamStronglyDecreasing (8),
trafficJamStable (9)
} (0..255)
```
### <a name="TrafficDirection"></a>TrafficDirection
This DE indicates a direction of traffic with respect to a reference direction, and a portion of that traffic with respect to a reference position.
- 0 `allTrafficDirections` - for all directions of traffic,
- 1 `sameAsReferenceDirection-upstreamOfReferencePosition` - for the direction of traffic according to the reference direction, and the portion of traffic upstream of the reference position,
- 2 `sameAsReferenceDirection-downstreamOfReferencePosition` - for the direction of traffic according to the reference direction, and the portion of traffic downstream of the reference position,
- 3 `oppositeToReferenceDirection` - for the direction of traffic opposite to the reference direction.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1 from RelevanceTrafficDirection, description and naming of values changed in V2.2.1_
NOTE: Upstream traffic corresponds to the incoming traffic towards the event position, and downstream traffic to the departing traffic away from the event position.
allTrafficDirections(0),
sameAsReferenceDirection-upstreamOfReferencePosition(1),
sameAsReferenceDirection-downstreamOfReferencePosition(2),
oppositeToReferenceDirection(3)
### <a name="TrafficParticipantType"></a>TrafficParticipantType
This DE represents the type of a traffic participant.
- 0 `unknown` - information about traffic participant is not provided,
- 1 `pedestrian` - human being not using a mechanical device for their trip (VRU profile 1),
- 2 `cyclist` - non-motorized unicycles, bicycles , tricycles, quadracycles (VRU profile 2),
- 3 `moped` - light motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class L1, L2 (VRU Profile 3),
- 4 `motorcycles` - motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class L3, L4, L5, L6, L7 (VRU Profile 3),
- 5 `passengerCar` - small passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class M1,
- 6 `bus` - large passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class M2, M3,
- 7 `lightTruck` - light Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class N1,
- 8 `heavyTruck` - Heavy Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class N2 and N3,
- 9 `trailer` - unpowered vehicle that is intended to be towed by a powered vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class O,
- 10 `specialVehicles` - vehicles which have special purposes other than the above (e.g. moving road works vehicle),
- 11 `tram` - vehicle which runs on tracks along public streets,
- 12 `lightVruVehicle` - human being traveling on light vehicle, incl. possible use of roller skates or skateboards (VRU profile 2),
- 13 `animal` - animal presenting a safety risk to other road users e.g. domesticated dog in a city or horse (VRU Profile 4),
- 14 `agricultural` - agricultural and forestry vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references) class T,
- 15 `roadSideUnit` - infrastructure typically positioned outside of the drivable roadway (e.g. on a gantry, on a pole,
on a stationary road works trailer); the infrastructure is static during the entire operation period of the ITS-S (e.g. no stop and go activity),
* **unknown** (0)<br>
* **pedestrian** (1)<br>
* **cyclist** (2)<br>
* **moped** (3)<br>
* **motorcycle** (4)<br>
* **passengerCar** (5)<br>
* **bus** (6)<br>
* **lightTruck** (7)<br>
* **heavyTruck** (8)<br>
* **trailer** (9)<br>
* **specialVehicle** (10)<br>
* **tram** (11)<br>
* **lightVruVehicle** (12)<br>
* **animal** (13)<br>
* **agricultural** (14)<br>
* **roadSideUnit** (15)<br>
**Categories:** Communication information.
**Revision:** _Created in V2.1.1 based on StationType_
4967
4968
4969
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
```asn1
TrafficParticipantType ::= INTEGER {
unknown (0),
pedestrian (1),
cyclist (2),
moped (3),
motorcycle (4),
passengerCar (5),
bus (6),
lightTruck (7),
heavyTruck (8),
trailer (9),
specialVehicle (10),
tram (11),
lightVruVehicle (12),
animal (13),
agricultural (14),
roadSideUnit (15)
} (0..255)
```
This DE indicates traffic rules that apply to vehicles at a certain position.
- `0` - if overtaking is prohibited for all vehicles,
- `1` - if overtaking is prohibited for trucks,
- `2` - if vehicles should pass to the right lane,
- `3` - if vehicles should pass to the left lane.
- `4` - if vehicles should pass to the left or right lane.
* **noPassing** (0)<br>
* **noPassingForTrucks** (1)<br>
* **passToRight** (2)<br>
* **passToLeft** (3)<br>
**Categories:** Infrastructure information Traffic information
**Revision:** _Editorial update in V2.1.1_
```asn1
TrafficRule ::= ENUMERATED {
noPassing (0),
noPassingForTrucks (1),
passToRight (2),
passToLeft (3),
### <a name="TrailerPresenceInformation"></a>TrailerPresenceInformation
This DE provides information about the presence of a trailer.
- 0 `noTrailerPresent` - to indicate that no trailer is present, i.e. either the vehicle is physically not enabled to tow a trailer or it has been detected that no trailer is present.
- 1 `trailerPresentWithKnownLength` - to indicate that a trailer has been detected as present and the length is included in the vehicle length value.
- 2 `trailerPresentWithUnknownLength` - to indicate that a trailer has been detected as present and the length is not included in the vehicle length value.
- 3 `trailerPresenceIsUnknown` - to indicate that information about the trailer presence is unknown, i.e. the vehicle is physically enabled to tow a trailer but the detection of trailer presence/absence is not possible.
- 4 `unavailable` - to indicate that the information about the presence of a trailer is not available, i.e. it is neither known whether the vehicle is able to tow a trailer
nor the detection of trailer presence/absence is possible.
* **noTrailerPresent** (0)<br>
* **trailerPresentWithKnownLength** (1)<br>
* **trailerPresentWithUnknownLength** (2)<br>
* **trailerPresenceIsUnknown** (3)<br>
* **unavailable** (4)<br>
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1 based on VehicleLengthConfidenceIndication_
```asn1
TrailerPresenceInformation ::= ENUMERATED {
noTrailerPresent (0),
trailerPresentWithKnownLength (1),
trailerPresentWithUnknownLength (2),
trailerPresenceIsUnknown (3),
unavailable (4)
}
```
### <a name="TrajectoryInterceptionProbability"></a>TrajectoryInterceptionProbability
This DE defines the probability that the ego trajectory intercepts with any other object's trajectory on the road.
- `n` (`n ≥ 0` and `n ≤ 50`) to indicate the actual probability,
- `63`: to indicate that the information is unavailable.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
TrajectoryInterceptionProbability ::= INTEGER {
unavailable (63)
} (0..63)
```
### <a name="TrajectoryInterceptionConfidence"></a>TrajectoryInterceptionConfidence
This DE defines the confidence level of the trajectoryInterceptionProbability.
- `0` - to indicate confidence level less than 50 %,
- `1` - to indicate confidence level greater than or equal to 50 % and less than 70 %,
- `2` - to indicate confidence level greater than or equal to 70 % and less than 90 %,
- `3` - to indicate confidence level greater than or equal to 90%.
* **lessthan50percent** (0)<br>
* **between50and70Percent** (1)<br>
* **between70and90Percent** (2)<br>
* **above90Percent** (3)<br>
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
TrajectoryInterceptionConfidence ::= INTEGER {
lessthan50percent (0),
between50and70Percent (1),
between70and90Percent (2),
above90Percent (3)
} (0..3)
```
### <a name="TransmissionInterval"></a>TransmissionInterval
This DE represents the time interval between two consecutive message transmissions.
**Categories:** Basic information
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**DeltaTimeMilliSecondPos**](#DeltaTimeMilliSecondPos) instead.
```asn1
TransmissionInterval::= INTEGER (1..10000)
```
### <a name="TurningDirection"></a>TurningDirection
- `left` for turning to te left.
- `right` for turing to the right.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
TurningDirection::= ENUMERATED {
left,
right
}
```
### <a name="TurningRadius"></a>TurningRadius
This DE represents the smallest circular turn (i.e. U-turn) that the vehicle is capable of making.
- `n` (`n > 0` and `n < 254`) to indicate the applicable value is equal to or less than n x 0,4 metre, and greater than (n-1) x 0,4 metre,
- `254` to indicate that the turning radius is greater than 253 x 0,4 metre = 101.2 metres,
- `255` to indicate that the information is unavailable.
For vehicle with tracker, the turning radius applies to the vehicle only.
* **outOfRange** (254)<br>
* **unavailable** (255)<br>
**Categories:** Vehicle information
**Revision:** _Description revised V2.1.1 (the meaning of 254 has changed slightly)_
```asn1
TurningRadius ::= INTEGER {
outOfRange (254),
unavailable (255)
} (1..255)
```
5159
5160
5161
5162
5163
5164
5165
5166
5167
5168
5169
5170
5171
5172
5173
5174
5175
5176
5177
5178
5179
5180
5181
5182
### <a name="UsageIndication"></a>UsageIndication
This DE represents indication of how a certain path or area will be used.
The value shall be set to:
- 0 - ` noIndication ` - in case it will remain free to be used,
- 1 - ` specialUse ` - in case it will be physically blocked by special use,
- 2 - ` rescueOperation` - in case it is intended to be used for rescue operations,
Values:
* **specialUse** (1)<br>
* **rescueOperation** (2)<br>
**Categories:** Basic information
**Revision:** _Created in V2.2.1_
```asn1
UsageIndication ::= ENUMERATED {
noIndication(0),
specialUse (1),
rescueOperation (2),
...
}
```
### <a name="ValidityDuration"></a>ValidityDuration
This DE represents the duration of a traffic event validity.
**Categories:** Basic information
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**DeltaTimeSecond**](#DeltaTimeSecond) instead.
ValidityDuration::= INTEGER {
timeOfDetection(0),
oneSecondAfterDetection(1)
} (0..86400)
This DE represents the Vehicle Descriptor Section (VDS). The values are assigned according to ISO 3779 [[6]](#references).
**Categories:** Vehicle information
```asn1
VDS ::= IA5String (SIZE(6))
```
### <a name="VehicleBreakdownSubCauseCode"></a>VehicleBreakdownSubCauseCode
This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `vehicleBreakdown`.
- 0 `unavailable` - in case further detailed information on cause of vehicle break down is unavailable,
- 1 `lackOfFuel` - in case vehicle break down is due to lack of fuel,
- 2 `lackOfBatteryPower` - in case vehicle break down is caused by lack of battery power,
- 3 `engineProblem` - in case vehicle break down is caused by an engine problem,
- 4 `transmissionProblem` - in case vehicle break down is caused by transmission problem,
- 5 `engineCoolingProblem`- in case vehicle break down is caused by an engine cooling problem,
- 6 `brakingSystemProblem`- in case vehicle break down is caused by a braking system problem,
- 7 `steeringProblem` - in case vehicle break down is caused by a steering problem,
- 8 `tyrePuncture` - in case vehicle break down is caused by tyre puncture,
- 9 `tyrePressureProblem` - in case low tyre pressure in detected,
- 10 `vehicleOnFire` - in case the vehicle is on fire.
* **unavailable** (0)<br>
* **lackOfFuel** (1)<br>
* **lackOfBatteryPower** (2)<br>
* **engineProblem** (3)<br>
* **transmissionProblem** (4)<br>
* **engineCoolingProblem** (5)<br>
* **brakingSystemProblem** (6)<br>
* **steeringProblem** (7)<br>
* **tyrePuncture** (8)<br>
* **tyrePressureProblem** (9)<br>
* **vehicleOnFire** (10)<br>
**Categories:** Traffic information
```asn1
VehicleBreakdownSubCauseCode ::= INTEGER {
unavailable (0),
lackOfFuel (1),
lackOfBatteryPower (2),
engineProblem (3),
transmissionProblem (4),
engineCoolingProblem (5),
brakingSystemProblem (6),
steeringProblem (7),
tyrePuncture (8),
tyrePressureProblem (9),
vehicleOnFire (10)
} (0..255)
```
### <a name="VehicleHeight"></a>VehicleHeight
This DE represents the height of the vehicle, measured from the ground to the highest point, excluding any antennas.
In case vehicles are equipped with adjustable ride heights, camper shells, and any other
equipment which may result in varying height, the largest possible height shall be used.
- `n` (`n >0` and `n < 127`) indicates the applicable value is equal to or less than n x 0,05 metre, and greater than (n-1) x 0,05 metre,
- `127` indicates that the vehicle width is greater than 6,3 metres,
- `128` indicates that the information in unavailable.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _created in V2.1.1_
VehicleHeight ::= INTEGER {
outOfRange (126),
unavailable (127)
}(1..128)
```
### <a name="VehicleLengthConfidenceIndication"></a>VehicleLengthConfidenceIndication
This DE provides information about the presence of a trailer.
- 0 `noTrailerPresent` - to indicate that no trailer is present, i.e. either the vehicle is physically not enabled to tow a trailer or it has been detected that no trailer is present,
- 1 `trailerPresentWithKnownLength` - to indicate that a trailer has been detected as present and the length is included in the vehicle length value,
- 2 `trailerPresentWithUnknownLength` - to indicate that a trailer has been detected as present and the length is not included in the vehicle length value,
- 3 `trailerPresenceIsUnknown` - to indicate that information about the trailer presence is unknown, i.e. the vehicle is physically enabled to tow a trailer but the detection of trailer presence/absence is not possible,
- 4 `unavailable` - to indicate that the information about the presence of a trailer is not available, i.e. it is neither known whether the vehicle is able to tow a trailer,
nor the detection of trailer presence/absence is possible.
* **noTrailerPresent** (0)<br>
* **trailerPresentWithKnownLength** (1)<br>
* **trailerPresentWithUnknownLength** (2)<br>
* **trailerPresenceIsUnknown** (3)<br>
* **unavailable** (4)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrailerPresenceInformation**](#TrailerPresenceInformation) instead.
```asn1
VehicleLengthConfidenceIndication ::= ENUMERATED {
noTrailerPresent (0),
trailerPresentWithKnownLength (1),
trailerPresentWithUnknownLength (2),
trailerPresenceIsUnknown (3),
unavailable (4)
}
```
### <a name="VehicleLengthValue"></a>VehicleLengthValue
- `n` (`n > 0` and `n < 1022`) to indicate the applicable value n is equal to or less than n x 0,1 metre, and greater than (n-1) x 0,1 metre,
- `1 022` to indicate that the vehicle length is greater than 102.1 metres,
- `1 023` to indicate that the information in unavailable.
**Categories:** Vehicle information
**Revision:** _Description updated in V2.1.1 (the meaning of 1 022 has changed slightly)._
```asn1
VehicleLengthValue ::= INTEGER {
outOfRange(1022),
unavailable(1023)
} (1..1023)
```
### <a name="VehicleMass"></a>VehicleMass
This DE represents the mass of an empty loaded vehicle.
- `n` (`n > 0` and `n < 1023`) to indicate that the applicable value is equal to or less than n x 10<sup>5</sup> gramm, and greater than (n-1) x 10<sup>5</sup> gramm,
- `1 023` indicates that the vehicle mass is greater than 102 200 000 g,
- `1 024` indicates the vehicle mass information is unavailable.
**Unit:** _10<sup>5</sup> gramm_
**Categories:** Vehicle information
**Revision:** _Description updated in V2.1.1 (the meaning of 1 023 has changed slightly)._
NOTE: The empty load vehicle is defined in ISO 1176 [[8]](#references), clause 4.6.
```asn1
VehicleMass ::= INTEGER {
outOfRange (1023),
unavailable(1024)
} (1..1024)
```
### <a name="VehicleRole"></a>VehicleRole
This DE indicates the role played by a vehicle at a point in time.
- 0 `default` - to indicate the default vehicle role as indicated by the vehicle type,
- 1 `publicTransport` - to indicate that the vehicle is used to operate public transport service,
- 2 `specialTransport` - to indicate that the vehicle is used for special transport purpose, e.g. oversized trucks,
- 3 `dangerousGoods` - to indicate that the vehicle is used for dangerous goods transportation,
- 4 `roadWork` - to indicate that the vehicle is used to realize roadwork or road maintenance mission,
- 5 `rescue` - to indicate that the vehicle is used for rescue purpose in case of an accident, e.g. as a towing service,
- 6 `emergency` - to indicate that the vehicle is used for emergency mission, e.g. ambulance, fire brigade,
- 7 `safetyCar` - to indicate that the vehicle is used for public safety, e.g. patrol,
- 8 `agriculture` - to indicate that the vehicle is used for agriculture, e.g. farm tractor,
- 9 `commercial` - to indicate that the vehicle is used for transportation of commercial goods,
- 10 `military` - to indicate that the vehicle is used for military purpose,
- 11 `roadOperator` - to indicate that the vehicle is used in road operator missions,
- 12 `taxi` - to indicate that the vehicle is used to provide an authorized taxi service,
- 13 `uvar` - to indicate that the vehicle is authorized to enter a zone according to the applicable Urban Vehicle Access Restrictions.
- 14 `rfu1` - is reserved for future usage.
- 15 `rfu2` - is reserved for future usage.
* **default** (0)<br>
* **publicTransport** (1)<br>
* **dangerousGoods** (3)<br>
* **roadWork** (4)<br>
* **rescue** (5)<br>
* **emergency** (6)<br>
* **safetyCar** (7)<br>
* **agriculture** (8)<br>
* **commercial** (9)<br>
* **military** (10)<br>
* **roadOperator** (11)<br>
* **taxi** (12)<br>
* **uvar** (13)<br>
* **rfu1** (14)<br>
* **rfu2** (15)<br>
**Categories:** Vehicle Information
**Revision:** _Description updated in V2.1.1 (removed reference to CEN/TS 16157-3), value 13 assigned in V2.2.1_
```asn1
VehicleRole ::= ENUMERATED {
default (0),
publicTransport (1),
specialTransport(2),
dangerousGoods (3),
roadWork (4),
rescue (5),
emergency (6),
safetyCar (7),
agriculture (8),
commercial (9),
military (10),
roadOperator (11),
taxi (12),
}
```
### <a name="VehicleWidth"></a>VehicleWidth
This DE represents the width of a vehicle, excluding side mirrors and possible similar extensions.
- `n` (`n > 0` and `n < 61`) indicates the applicable value is equal to or less than n x 0,1 metre, and greater than (n-1) x 0,1 metre,
- `61` indicates that the vehicle width is greater than 6,0 metres,
- `62` indicates that the information in unavailable.
* **outOfRange** (61)<br>
* **unavailable** (62)<br>
**Categories:** Vehicle information
**Revision:** _Description updated in V2.1.1 (the meaning of 61 has changed slightly)._
```asn1
VehicleWidth ::= INTEGER {
outOfRange (61),
unavailable (62)
} (1..62)
```
### <a name="VerticalAccelerationValue"></a>VerticalAccelerationValue
This DE represents the vehicle acceleration at vertical direction in the centre of the mass of the empty vehicle.
The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [[21]](#references), clause 2.11.
- `-160` for acceleration values equal to or less than -16 m/s<sup>2</sup>,
- `n` (`n > -160` and `n ≤ 0`) to indicate downwards acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `n` (`n > 0` and `n < 160`) to indicate upwards acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>,
- `160` for acceleration values greater than 15,9 m/s<sup>2</sup>,
- `161` when the data is unavailable.
* **negativeOutOfRange** (-160)<br>
* **positiveOutOfRange** (160)<br>
* **unavailable** (161)<br>
**Unit:** _0,1 m/s<sup>2</sup>_
**Categories:** Vehicle information
**Revision:** _Desciption updated in V2.1.1 (the meaning of 160 has changed slightly)._
NOTE: The empty load vehicle is defined in ISO 1176 [[8]](#references), clause 4.6.
VerticalAccelerationValue ::= INTEGER {
negativeOutOfRange (-160),
positiveOutOfRange (160),
unavailable (161)
} (-160 .. 161)
```
### <a name="VruClusterProfiles"></a>VruClusterProfiles
This DE Identifies all the VRU profile types within a cluster.
It consist of a Bitmap encoding VRU profiles, to allow multiple profiles to be indicated in a single cluster (heterogeneous cluster if more than one profile).
The corresponding bit shall be set to 1 under the following conditions:
- 0 `pedestrian` - indicates that the VRU cluster contains at least one pedestrian VRU,
- 1 `bicycle` - indicates that the VRU cluster contains at least one bicycle VRU member,
- 2 `motorcyclist`- indicates that the VRU cluster contains at least one motorcycle VRU member,
- 3 `animal` - indicates that the VRU cluster contains at least one animal VRU member.
Otherwise, the corresponding bit shall be set to 0.
* **pedestrian** (0)<br>
* **bicyclist** (1)<br>
* **motorcyclist** (2)<br>
* **animal** (3)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1_
```asn1
VruClusterProfiles ::= BIT STRING {
pedestrian (0),
bicyclist (1),
motorcyclist (2),
animal (3)
} (SIZE(4))
```
### <a name="VruDeviceUsage"></a>VruDeviceUsage
This DE represents the possible usage conditions of the VRU device.
- 0 `unavailable` - to indicate that the usage conditions are unavailable,
- 1 `other` - to indicate that the VRU device is in a state not defined below,
- 2 `idle` - to indicate that the human is currently not interacting with the device,
- 3 `listeningToAudio` - to indicate that any audio source other than calling is in use,
- 4 `typing` - to indicate that the human is texting or performaing any other manual input activity,
- 5 `calling` - to indicate that the VRU device is currently receiving a call,
- 6 `playingGames` - to indicate that the human is playing games,
- 7 `reading` - to indicate that the human is reading on the VRU device,
- 8 `viewing` - to indicate that the human is watching dynamic content, including following navigation prompts, viewing videos or other visual contents that are not static.
* **unavailable** (0)<br>
* **other** (1)<br>
* **idle** (2)<br>
* **listeningToAudio** (3)<br>
* **typing** (4)<br>
* **calling** (5)<br>
* **playingGames** (6)<br>
* **reading** (7)<br>
* **viewing** (8)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1 and range changed from 0..255 to 0..15_
unavailable (0),
other (1),
idle (2),
listeningToAudio (3),
typing (4),
calling (5),
playingGames (6),
reading (7),
```
### <a name="VruEnvironment"></a>VruEnvironment
This DE represents the possible VRU environment conditions.
- 0 `unavailable` - to indicate that the information on the type of environment is unavailable,
- 1 `intersectionCrossing` - to indicate that the VRU is on an intersection or crossing,
- 2 `zebraCrossing` - to indicate that the VRU is on a zebra crossing (crosswalk),
- 3 `sidewalk` - to indicate that the VRU is on a sidewalk,
- 4 `onVehicleRoad` - to indicate that the VRU is on a traffic lane,
- 5 `protectedGeographicArea`- to indicate that the VRU is in a protected area.
* **unavailable** (0)<br>
* **intersectionCrossing** (1)<br>
* **zebraCrossing** (2)<br>
* **sidewalk** (3)<br>
* **onVehicleRoad** (4)<br>
* **protectedGeographicArea** (5)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1 and range changed from 0..255 to 0..15_
unavailable (0),
intersectionCrossing (1),
zebraCrossing (2),
sidewalk (3),
onVehicleRoad (4),
```
### <a name="VruMovementControl"></a>VruMovementControl
This DE indicates the status of the possible human control over a VRU vehicle.
- 0 `unavailable` - to indicate that the information is unavailable,
- 1 `braking` - to indicate that the VRU is braking,
- 2 `hardBraking` - to indicate that the VRU is braking hard,
- 3 `stopPedaling` - to indicate that the VRU stopped pedaling,
- 4 `brakingAndStopPedaling` - to indicate that the VRU stopped pedaling an is braking,
- 5 `hardBrakingAndStopPedaling` - to indicate that the VRU stopped pedaling an is braking hard,
- 6 `noReaction` - to indicate that the VRU is not changing its behavior.
* **unavailable** (0)<br>
* **braking** (1)<br>
* **hardBraking** (2)<br>
* **stopPedaling** (3)<br>
* **brakingAndStopPedaling** (4)<br>
* **hardBrakingAndStopPedaling** (5)<br>
* **noReaction** (6)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1 and range changed from 0..255 to 0..15_
unavailable (0),
braking (1),
hardBraking (2),
stopPedaling (3),
brakingAndStopPedaling (4),
hardBrakingAndStopPedaling (5),
```
### <a name="VruSubProfilePedestrian"></a>VruSubProfilePedestrian
- 0 `unavailable` - to indicate that the information on is unavailable,
- 1 `ordinary-pedestrian` - to indicate a pedestrian to which no more-specific profile applies,
- 2 `road-worker` - to indicate a pedestrian with the role of a road worker,
- 3 `first-responder` - to indicate a pedestrian with the role of a first responder.
* **unavailable** (0)<br>
* **ordinary-pedestrian** (1)<br>
* **road-worker** (2)<br>
* **first-responder** (3)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1_
unavailable (0),
ordinary-pedestrian (1),
road-worker (2),
```
### <a name="VruSubProfileBicyclist"></a>VruSubProfileBicyclist
This DE indicates the profile of a VRU and its light VRU vehicle / mounted animal.
- 0 `unavailable` - to indicate that the information is unavailable,
- 1 `bicyclist ` - to indicate a cycle and bicyclist to which no more-specific profile applies,
- 2 `wheelchair-user` - to indicate a wheelchair and its user,
- 3 `horse-and-rider` - to indicate a horse and rider,
- 4 `rollerskater` - to indicate a roller-skater and skater,
- 5 `e-scooter` - to indicate an e-scooter and rider,
- 6 `personal-transporter` - to indicate a personal-transporter and rider,
- 7 `pedelec` - to indicate a pedelec and rider to which no more-specific profile applies,
- 8 `speed-pedelec` - to indicate a speed-pedelec and rider.
- 9 `roadbike` - to indicate a road bicycle (or road pedelec) and rider,
- 10 `childrensbike` - to indicate a childrens bicycle (or childrens pedelec) and rider,
- 11 to 15 - are reserved for future usage.
* **unavailable** (0)<br>
* **bicyclist** (1)<br>
* **wheelchair-user** (2)<br>
* **horse-and-rider** (3)<br>
* **rollerskater** (4)<br>
* **e-scooter** (5)<br>
* **personal-transporter** (6)<br>
* **pedelec** (7)<br>
* **speed-pedelec** (8)<br>
* **roadbike** (9)<br>
* **childrensbike** (10)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, values 9 and 10 assigned in V2.2.1_
unavailable (0),
bicyclist (1),
wheelchair-user (2),
horse-and-rider (3),
rollerskater (4),
e-scooter (5),
personal-transporter (6),
pedelec (7),
speed-pedelec (8),
roadbike (9),
childrensbike (10)
```
### <a name="VruSubProfileMotorcyclist"></a>VruSubProfileMotorcyclist
This DE indicates the profile of a motorcyclist and corresponding vehicle.
- 0 `unavailable ` - to indicate that the information is unavailable,
- 1 `moped` - to indicate a moped and rider,
- 2 `motorcycle` - to indicate a motorcycle and rider,
- 3 `motorcycle-and-sidecar-right` - to indicate a motorcycle with sidecar on the right and rider,
- 4 `motorcycle-and-sidecar-left` - to indicate a motorcycle with sidecar on the left and rider.
* **unavailable** (0)<br>
* **moped** (1)<br>
* **motorcycle** (2)<br>
* **motorcycle-and-sidecar-right** (3)<br>
* **motorcycle-and-sidecar-left** (4)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1_
unavailable (0),
moped (1),
motorcycle (2),
motorcycle-and-sidecar-right (3),
```
### <a name="VruSubProfileAnimal"></a>VruSubProfileAnimal
- 0 `unavailable` - to indicate that the information is unavailable,
- 1 `wild-animal` - to indicate a animal living in the wildness,
- 2 `farm-animal` - to indicate an animal beloning to a farm,
- 3 `service-animal` - to indicate an animal that supports a human being.
* **unavailable** (0)<br>
* **wild-animal** (1)<br>
* **farm-animal** (2)<br>
* **service-animal** (3)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1_
unavailable (0),
wild-animal (1),
farm-animal (2),
```
### <a name="VruSizeClass"></a>VruSizeClass
This DE indicates the approximate size of a VRU including the VRU vehicle used.
- 0 `unavailable` - to indicate that there is no matched size class or due to privacy reasons in profile 1,
- 1 `low` - to indicate that the VRU size class is low depending on the VRU profile,
- 2 `medium` - to indicate that the VRU size class is medium depending on the VRU profile,
- 3 `high` - to indicate that the VRU size class is high depending on the VRU profile.
* **unavailable** (0)<br>
* **low** (1)<br>
* **medium** (2)<br>
* **high** (3)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1, type changed from ENUMERATED to INTEGER in V2.2.1_
```
### <a name="VruSpecificExteriorLights"></a>VruSpecificExteriorLights
This DE describes the status of the exterior light switches of a VRU.
The value of each bit indicates the state of the switch, which commands the corresponding light.
The bit corresponding to a specific light shall be set to 1, when the corresponding switch is turned on, either manually by the driver or VRU
- 0 `unavailable` - indicates no information available,
- 1 `backFlashLight ` - indicates the status of the back flash light,
- 2 `helmetLight` - indicates the status of the helmet light,
- 3 `armLight` - indicates the status of the arm light,
- 4 `legLight` - indicates the status of the leg light,
- 5 `wheelLight` - indicates the status of the wheel light.
The bit values do not indicate if the corresponding lamps are alight or not.
If VRU is not equipped with a certain light or if the light switch status information is not available, the corresponding bit shall be set to 0.
* **unavailable** (0)<br>
* **backFlashLight** (1)<br>
* **helmetLight** (2)<br>
* **armLight** (3)<br>
* **legLight** (4)<br>
* **wheelLight** (5)<br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1_
```asn1
VruSpecificExteriorLights ::= BIT STRING {
unavailable (0),
backFlashLight (1),
helmetLight (2),
armLight (3),
legLight (4),
wheelLight (5)
} (SIZE(8))
```
### <a name="WheelBaseVehicle"></a>WheelBaseVehicle
This DE indicates the perpendicular distance between front and rear axle of the wheel base of vehicle.
- `n` (`n ≥ 1` and `n < 126`) if the value is equal to or less than n x 0,1 metre and more than (n-1) x 0,1 metre,
- `126` indicates that the wheel base distance is equal to or greater than 12,5 metres,
- `127` indicates that the information is unavailable.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
```asn1
WheelBaseVehicle ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="Wgs84AngleConfidence"></a>Wgs84AngleConfidence
This DE indicates the angle confidence value which represents the estimated accuracy of an angle value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `n` (`n ≥ 1` and `n < 126`) if the confidence value is equal to or less than n x 0,1 degrees and more than (n-1) x 0,1 degrees,
- `126` if the confidence value is out of range, i.e. greater than 12,5 degrees,
- `127` if the confidence value is not available.
* **outOfRange** (126)<br>
* **unavailable** (127)<br>
**Categories:** GeoReference Information
**Revision:** _Created in V2.1.1_
```asn1
Wgs84AngleConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
```
### <a name="Wgs84AngleValue"></a>Wgs84AngleValue
This DE represents an angle value in degrees described in the WGS84 reference system with respect to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
When the information is not available, the DE shall be set to 3 601. The value 3600 shall not be used.
* **wgs84North** (0)<br>
* **wgs84East** (900)<br>
* **wgs84South** (1800)<br>
* **wgs84West** (2700)<br>
* **doNotUse** (3600)<br>
* **unavailable** (3601)<br>
**Categories:** GeoReference Information
**Revision:** _Created in V2.1.1_
```asn1
Wgs84AngleValue ::= INTEGER {
wgs84North (0),
wgs84East (900),
wgs84South (1800),
wgs84West (2700),
doNotUse (3600),
unavailable (3601)
} (0..3601)
```
### <a name="WMInumber"></a>WMInumber
This DE represents the World Manufacturer Identifier (WMI). The values are assigned according to ISO 3779 [[6]](#references).
**Categories:** Vehicle information
```asn1
WMInumber ::= IA5String (SIZE(1..3))
```
### <a name="WrongWayDrivingSubCauseCode"></a>WrongWayDrivingSubCauseCode
This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) `wrongWayDriving` .
- 0 `unavailable` - in case further detailed information on wrong way driving event is unavailable,
- 1 `wrongLane` - in case vehicle is driving on a lane for which it has no authorization to use,
- 2 `wrongDirection` - in case vehicle is driving in a direction that it is not allowed,
* **unavailable** (0)<br>
* **wrongLane** (1)<br>
* **wrongDirection** (2)<br>
**Categories:** Traffic information
```asn1
WrongWayDrivingSubCauseCode ::= INTEGER {
unavailable (0),
wrongLane (1),
wrongDirection (2)
} (0..255)
```
### <a name="YawRateConfidence"></a>YawRateConfidence
This DE indicates the yaw rate confidence value which represents the estimated accuracy for a yaw rate value with a default confidence level of 95 %.
If required, the confidence level can be defined by the corresponding standards applying this DE.
- `0` if the confidence value is equal to or less than 0,01 degree/second,
- `1` if the confidence value is equal to or less than 0,05 degrees/second or greater than 0,01 degree/second,
- `2` if the confidence value is equal to or less than 0,1 degree/second or greater than 0,05 degree/second,
- `3` if the confidence value is equal to or less than 1 degree/second or greater than 0,1 degree/second,
- `4` if the confidence value is equal to or less than 5 degrees/second or greater than 1 degrees/second,
- `5` if the confidence value is equal to or less than 10 degrees/second or greater than 5 degrees/second,
- `6` if the confidence value is equal to or less than 100 degrees/second or greater than 10 degrees/second,
- `7` if the confidence value is out of range, i.e. greater than 100 degrees/second,
- `8` if the confidence value is unavailable.
NOTE: The fact that a yaw rate value is received with confidence value set to `unavailable(8)` can be caused by
several reasons, such as:
- the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
- the sensor cannot calculate the accuracy due to lack of variables, or
- there has been a vehicle bus (e.g. CAN bus) error.
In all 3 cases above, the yaw rate value may be valid and used by the application.
If a yaw rate value is received and its confidence value is set to `outOfRange(7)`, it means that the
yaw rate value is not valid and therefore cannot be trusted. Such value is not useful the application.
* **degSec-000-01** (0)<br>
* **degSec-000-05** (1)<br>
* **degSec-000-10** (2)<br>
* **degSec-001-00** (3)<br>
* **degSec-005-00** (4)<br>
* **degSec-010-00** (5)<br>
* **degSec-100-00** (6)<br>
* **outOfRange** (7)<br>
* **unavailable** (8)<br>
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
```asn1
YawRateConfidence ::= ENUMERATED {
degSec-000-01 (0),
degSec-000-05 (1),
degSec-000-10 (2),
degSec-005-00 (4),
degSec-010-00 (5),
degSec-100-00 (6),
outOfRange (7),
unavailable (8)
}
```
### <a name="YawRateValue"></a>YawRateValue
This DE represents the vehicle rotation around z-axis of the coordinate system centred on the centre of mass of the empty-loaded
vehicle. The leading sign denotes the direction of rotation.
The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [[21]](#references), clause 2.11.
- `-32 766` to indicate that the yaw rate is equal to or greater than 327,66 degrees/second to the right,
- `n` (`n > -32 766` and `n ≤ 0`) to indicate that the rotation is clockwise (i.e. to the right) and is equal to or less than n x 0,01 degrees/s,
- `n` (`n > 0` and `n < 32 766`) to indicate that the rotation is anti-clockwise (i.e. to the left) and is equal to or less than n x 0,01 degrees/s,
- `32 766` to indicate that the yaw rate is greater than 327.65 degrees/second to the left,
- `32 767` to indicate that the information is not available.
The yaw rate value shall be a raw data value, i.e. not filtered, smoothed or otherwise modified.
The reading instant should be the same as for the vehicle acceleration.
* **negativeOutOfRange** (-32766)<br>
* **positiveOutOfRange** (32766)<br>
* **unavailable** (32767)<br>
**Unit:** _0,01 degree per second._
**Categories:** Vehicle Information
**Revision:** _Desription revised in V2.1.1 (the meaning of 32766 has changed slightly)._
NOTE: The empty load vehicle is defined in ISO 1176 [[8]](#references), clause 4.6.
```asn1
YawRateValue ::= INTEGER {
negativeOutOfRange (-32766),
positiveOutOfRange (32766),
unavailable (32767)
} (-32766..32767)
```
### <a name="Acceleration3dWithConfidence"></a>Acceleration3dWithConfidence
This DF represents an acceleration vector with associated confidence value.
It shall include the following components:
* _polarAcceleration_ of type [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) <br>
the representation of the acceleration vector in a polar or cylindrical coordinate system.
* _cartesianAcceleration_ of type [**AccelerationCartesian**](#AccelerationCartesian) <br>
the representation of the acceleration vector in a cartesian coordinate system.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
Acceleration3dWithConfidence::= CHOICE {
polarAcceleration AccelerationPolarWithZ,
cartesianAcceleration AccelerationCartesian
}
```
### <a name="AccelerationPolarWithZ"></a>AccelerationPolarWithZ
This DF represents an acceleration vector in a polar or cylindrical coordinate system.
* _accelerationMagnitude_ of type [**AccelerationMagnitude**](#AccelerationMagnitude) <br>
magnitude of the acceleration vector projected onto the reference plane, with the associated confidence value.
* _accelerationDirection_ of type [**CartesianAngle**](#CartesianAngle) <br>
polar angle of the acceleration vector projected onto the reference plane, with the associated confidence value.
* _zAcceleration_ of type [**AccelerationComponent**](#AccelerationComponent) OPTIONAL<br>
the optional z component of the acceleration vector along the reference axis of the cylindrical coordinate system, with the associated confidence value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AccelerationPolarWithZ::= SEQUENCE{
accelerationMagnitude AccelerationMagnitude,
accelerationDirection CartesianAngle,
zAcceleration AccelerationComponent OPTIONAL
}
```
### <a name="AccelerationCartesian"></a>AccelerationCartesian
This DF represents a acceleration vector in a cartesian coordinate system.
* _xAcceleration_ of type [**AccelerationComponent**](#AccelerationComponent) <br>
the x component of the acceleration vector with the associated confidence value.
* _yAcceleration_ of type [**AccelerationComponent**](#AccelerationComponent) <br>
the y component of the acceleration vector with the associated confidence value.
* _zAcceleration_ of type [**AccelerationComponent**](#AccelerationComponent) OPTIONAL<br>
the optional z component of the acceleration vector with the associated confidence value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AccelerationCartesian::= SEQUENCE{
xAcceleration AccelerationComponent,
yAcceleration AccelerationComponent,
zAcceleration AccelerationComponent OPTIONAL
}
```
### <a name="AccelerationComponent"></a>AccelerationComponent
This DF represents an acceleration component along with a confidence value.
* _value_ of type [**AccelerationValue**](#AccelerationValue) <br>
the value of the acceleration component which can be estimated as the mean of the current distribution.
* _confidence_ of type [**AccelerationConfidence**](#AccelerationConfidence) <br>
the confidence value associated to the provided value.
**Categories:** Kinematic Information
**Revision:** _Created in V2.1.1_
confidence AccelerationConfidence
}
```
### <a name="AccelerationChangeIndication"></a>AccelerationChangeIndication
This DF represents information associated to changes in acceleration.
* _accelOrDecel_ of type [**AccelerationChange**](#AccelerationChange) <br>
* _actionDeltaTime_ of type [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) <br>
the period over which the acceleration change action is performed.
**Categories:** Kinematic Information
**Revision:** _Created in V2.1.1_
```asn1
AccelerationChangeIndication ::= SEQUENCE {
accelOrDecel AccelerationChange,
actionDeltaTime DeltaTimeTenthOfSecond,
...
}
```
### <a name="AccelerationMagnitude"></a>AccelerationMagnitude
This DF represents the magnitude of the acceleration vector and associated confidence value.
It shall include the following components:
* _accelerationMagnitudeValue_ of type [**AccelerationMagnitudeValue**](#AccelerationMagnitudeValue) <br>
* _accelerationConfidence_ of type [**AccelerationConfidence**](#AccelerationConfidence) <br>
the confidence value of the magnitude value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
AccelerationMagnitude::= SEQUENCE {
accelerationMagnitudeValue AccelerationMagnitudeValue,
accelerationConfidence AccelerationConfidence
}
```
This DF represents an identifier used to describe a protocol action taken by an ITS-S.
* _originatingStationId_ of type [**StationId**](#StationId) <br>
* _sequenceNumber_ of type [**SequenceNumber**](#SequenceNumber) <br>
**Categories:** Communication information
**Revision:** _Created in V2.1.1 based on [**ActionID**](#ActionID)._
ActionId ::= SEQUENCE {
originatingStationId StationId,
sequenceNumber SequenceNumber
}
```
This DF represents an identifier used to describe a protocol action taken by an ITS-S.
It shall include the following components:
* _originatingStationId_ of type [**StationID**](#StationID) <br>
* _sequenceNumber_ of type [**SequenceNumber**](#SequenceNumber) <br>
**Categories:** Communication information
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**ActionId**](#ActionId) instead.
```asn1
ActionID ::= SEQUENCE {
originatingStationId StationID,
sequenceNumber SequenceNumber
}
```
This DF shall contain a list of [**ActionId**](#ActionId).
**Categories:** Communication Information
**Revision:** _Created in V2.1.1 based on ReferenceDenms from DENM Release 1_
ActionIdList::= SEQUENCE (SIZE(1..8, ...)) OF ActionId
This DF provides the altitude and confidence level of an altitude information in a WGS84 coordinate system.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
* _altitudeValue_ of type [**AltitudeValue**](#AltitudeValue) <br>
* _altitudeConfidence_ of type [**AltitudeConfidence**](#AltitudeConfidence) <br>
**Categories:** GeoReference information
**Revision:** _Description revised in V2.1.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**AltitudeWithConfidence**](#AltitudeWithConfidence) instead.
```asn1
Altitude ::= SEQUENCE {
altitudeValue AltitudeValue,
altitudeConfidence AltitudeConfidence
}
```
### <a name="BasicContainer"></a>BasicContainer
This DE represents a general container for usage in various types of messages.
* _stationType_ of type [**TrafficParticipantType**](#TrafficParticipantType) <br>
the type of technical context in which the ITS-S that has generated the message is integrated in.
* _referencePosition_ of type [**ReferencePositionWithConfidence**](#ReferencePositionWithConfidence) <br>
the reference position of the station that has generated the message that contains the basic container.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
stationType TrafficParticipantType,
referencePosition ReferencePositionWithConfidence,
### <a name="BasicLaneConfiguration"></a>BasicLaneConfiguration
This DF provides information about the configuration of a road section in terms of lanes using a list of [**LanePositionAndType**](#LanePositionAndType) .
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
6297
6298
6299
6300
6301
6302
6303
6304
6305
6306
6307
6308
6309
6310
6311
6312
6313
6314
6315
6316
6317
6318
6319
6320
6321
6322
6323
6324
6325
6326
6327
6328
6329
6330
6331
6332
6333
6334
6335
BasicLaneConfiguration::= SEQUENCE(SIZE(1..16,...)) OF BasicLaneInformation
```
### <a name="BasicLaneInformation"></a>BasicLaneInformation
This DF provides basic information about a single lane of a road segment.
It includes the following components:
* _laneNumber_ of type [**LanePosition**](#LanePosition) <br>
the number associated to the lane that provides a transversal identification.
* _direction_ of type [**Direction**](#Direction) <br>
the direction of traffic flow allowed on the lane.
* _laneWidth_ of type [**LaneWidth**](#LaneWidth) OPTIONAL<br>
the optional width of the lane.
* _connectingLane_ of type [**LanePosition**](#LanePosition) OPTIONAL<br>
the number of the connecting lane in the next road section, i.e. the number of the lane which the vehicle will use when travelling from one section to the next,
if it does not actively change lanes. If this component is absent, the lane name number remains the same in the next section.
* _connectingRoadSection_ of type [**RoadSectionId**](#RoadSectionId) OPTIONAL<br>
the identifier of the next road section in direction of traffic, that is connecting to the current road section.
If this component is absent, the connecting road section is the one following the instance where this DF is placed in the [**RoadConfigurationSectionList**](#RoadConfigurationSectionList).
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
BasicLaneInformation::= SEQUENCE{
laneNumber LanePosition,
direction Direction,
laneWidth LaneWidth OPTIONAL,
connectingLane LanePosition OPTIONAL,
connectingRoadSection RoadSectionId OPTIONAL,
...
}
((WITH COMPONENTS {..., connectingLane PRESENT}) |
(WITH COMPONENTS {..., connectingLane ABSENT, connectingRoadSection ABSENT}))
This DF represents a general Data Frame to describe an angle component along with a confidence value in a cartesian coordinate system.
* _value_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
The angle value which can be estimated as the mean of the current distribution.
* _confidence_ of type [**AngleConfidence**](#AngleConfidence) <br>
The confidence value associated to the provided value.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
CartesianAngle ::= SEQUENCE {
value CartesianAngleValue,
confidence AngleConfidence
}
```
### <a name="CartesianAngularVelocityComponent"></a>CartesianAngularVelocityComponent
This DF represents an angular velocity component along with a confidence value in a cartesian coordinate system.
* _value_ of type [**CartesianAngularVelocityComponentValue**](#CartesianAngularVelocityComponentValue) <br>
* _confidence_ of type [**AngularSpeedConfidence**](#AngularSpeedConfidence) <br>
The confidence value associated to the provided value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
CartesianAngularVelocityComponent ::= SEQUENCE {
value CartesianAngularVelocityComponentValue,
confidence AngularSpeedConfidence
}
```
### <a name="CartesianAngularAccelerationComponent"></a>CartesianAngularAccelerationComponent
This DF represents a general Data Frame to describe an angular acceleration component along with a confidence value in a cartesian coordinate system.
* _value_ of type [**CartesianAngularAccelerationComponentValue**](#CartesianAngularAccelerationComponentValue) <br>
* _confidence_ of type [**AngularAccelerationConfidence**](#AngularAccelerationConfidence) <br>
The confidence value associated to the provided value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
CartesianAngularAccelerationComponent ::= SEQUENCE {
value CartesianAngularAccelerationComponentValue,
confidence AngularAccelerationConfidence
}
```
### <a name="CartesianCoordinateWithConfidence"></a>CartesianCoordinateWithConfidence
This DF represents a coordinate along with a confidence value in a cartesian reference system.
* _value_ of type [**CartesianCoordinateLarge**](#CartesianCoordinateLarge) <br>
the coordinate value, which can be estimated as the mean of the current distribution.
* _confidence_ of type [**CoordinateConfidence**](#CoordinateConfidence) <br>
the coordinate confidence value associated to the provided value.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
```asn1
CartesianCoordinateWithConfidence ::= SEQUENCE {
confidence CoordinateConfidence
}
```
### <a name="CartesianPosition3d"></a>CartesianPosition3d
This DF represents a position in a two- or three-dimensional cartesian coordinate system.
* _xCoordinate_ of type [**CartesianCoordinate**](#CartesianCoordinate) <br>
* _yCoordinate_ of type [**CartesianCoordinate**](#CartesianCoordinate) <br>
* _zCoordinate_ of type [**CartesianCoordinate**](#CartesianCoordinate) OPTIONAL<br>
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
```asn1
CartesianPosition3d::=SEQUENCE{
xCoordinate CartesianCoordinate,
yCoordinate CartesianCoordinate,
zCoordinate CartesianCoordinate OPTIONAL
}
```
### <a name="CartesianPosition3dWithConfidence"></a>CartesianPosition3dWithConfidence
This DF represents a position in a two- or three-dimensional cartesian coordinate system with an associated confidence level for each coordinate.
It shall include the following components:
* _xCoordinate_ of type [**CartesianCoordinateWithConfidence**](#CartesianCoordinateWithConfidence) <br>
the X coordinate value with the associated confidence level.
* _yCoordinate_ of type [**CartesianCoordinateWithConfidence**](#CartesianCoordinateWithConfidence) <br>
the Y coordinate value with the associated confidence level.
* _zCoordinate_ of type [**CartesianCoordinateWithConfidence**](#CartesianCoordinateWithConfidence) OPTIONAL<br>
the optional Z coordinate value with the associated confidence level.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
```asn1
CartesianPosition3dWithConfidence::= SEQUENCE{
xCoordinate CartesianCoordinateWithConfidence,
yCoordinate CartesianCoordinateWithConfidence,
zCoordinate CartesianCoordinateWithConfidence OPTIONAL
}
```
This DF is a representation of the cause code value of a traffic event.
* _causeCode_ of type [**CauseCodeType**](#CauseCodeType) <br>
* _subCauseCode_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
The semantics of the entire DF are completely defined by the component causeCode. The interpretation of the subCauseCode may
provide additional information that is not strictly necessary to understand the causeCode itself, and is therefore optional.
**Categories:** Traffic information
**Revision:** _Editorial update in V2.1.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**CauseCodeV2**](#CauseCodeV2) instead.
```asn1
CauseCode ::= SEQUENCE {
causeCode CauseCodeType,
subCauseCode SubCauseCodeType,
...
}
```
### <a name="CauseCodeChoice"></a>CauseCodeChoice
This DF is a representation of the cause code value and associated sub cause code value of a traffic event.
The following options are available:
- 0 - reserved for future use,
- 1 - `trafficCondition1` - in case the type of event is an abnormal traffic condition,
- 2 - `accident2` - in case the type of event is a road accident,
- 3 - `roadworks3` - in case the type of event is roadwork,
- 4 - reserved for future usage,
- 5 - `impassability5` - in case the type of event is unmanaged road blocking, referring to any
blocking of a road, partial or total, which has not been adequately secured and signposted,
- 6 - `adverseWeatherCondition-Adhesion6` - in case the type of event is low adhesion,
- 7 - `aquaplaning7` - danger of aquaplaning on the road,
- 8 - reserved for future usage,
- 9 - `hazardousLocation-SurfaceCondition9` - in case the type of event is abnormal road surface condition,
- 10 - `hazardousLocation-ObstacleOnTheRoad10` - in case the type of event is obstacle on the road,
- 11 - `hazardousLocation-AnimalOnTheRoad11` - in case the type of event is animal on the road,
- 12 - `humanPresenceOnTheRoad` - in case the type of event is presence of human vulnerable road user on the road,
- 13 - reserved for future usage,
- 14 - `wrongWayDriving14` - in case the type of the event is vehicle driving in wrong way,
- 15 - `rescueAndRecoveryWorkInProgress15` - in case the type of event is rescue and recovery work for accident or for a road hazard in progress,
- 16 - reserved for future usage,
- 17 - `adverseWeatherCondition-ExtremeWeatherCondition17` - in case the type of event is extreme weather condition,
- 18 - `adverseWeatherCondition-Visibility18` - in case the type of event is low visibility,
- 19 - `adverseWeatherCondition-Precipitation19` - in case the type of event is precipitation,
- 20 - `violence20` - in case the the type of event is human violence on or near the road,
- 21-25 - reserved for future usage,
- 26 - `slowVehicle26` - in case the type of event is slow vehicle driving on the road,
- 27 - `dangerousEndOfQueue27` - in case the type of event is dangerous end of vehicle queue,
- 28 - `publicTransportVehicleApproaching - in case the type of event is a public transport vehicle approaching, with a priority defined by applicable traffic regulations,
- 29-90 - are reserved for future usage,
- 91 - `vehicleBreakdown91` - in case the type of event is break down vehicle on the road,
- 92 - `postCrash92` - in case the type of event is a detected crash,
- 93 - `humanProblem93` - in case the type of event is human health problem in vehicles involved in traffic,
- 94 - `stationaryVehicle94` - in case the type of event is stationary vehicle,
- 95 - `emergencyVehicleApproaching95` - in case the type of event is an approaching vehicle operating on a mission for which the
applicable traffic regulations provide it with defined priority rights in traffic.
- 96 - `hazardousLocation-DangerousCurve96` - in case the type of event is dangerous curve,
- 97 - `collisionRisk97` - in case the type of event is a collision risk,
- 98 - `signalViolation98` - in case the type of event is signal violation,
- 99 - `dangerousSituation99` - in case the type of event is dangerous situation in which autonomous safety system in vehicle
is activated,
- 100 - `railwayLevelCrossing100` - in case the type of event is a railway level crossing.
- 101-255 - are reserved for future usage.
* _reserved0_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _trafficCondition1_ of type [**TrafficConditionSubCauseCode**](#TrafficConditionSubCauseCode) <br>
* _accident2_ of type [**AccidentSubCauseCode**](#AccidentSubCauseCode) <br>
* _roadworks3_ of type [**RoadworksSubCauseCode**](#RoadworksSubCauseCode) <br>
* _reserved4_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _impassability5_ of type [**ImpassabilitySubCauseCode**](#ImpassabilitySubCauseCode) <br>
6559
6560
6561
6562
6563
6564
6565
6566
6567
6568
6569
6570
6571
6572
6573
6574
6575
6576
6577
6578
6579
6580
* _adverseWeatherCondition-Adhesion6_ of type [**AdverseWeatherCondition-AdhesionSubCauseCode**](#AdverseWeatherCondition-AdhesionSubCauseCode) <br>
* _aquaplaning7_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved8_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _hazardousLocation-SurfaceCondition9_ of type [**HazardousLocation-SurfaceConditionSubCauseCode**](#HazardousLocation-SurfaceConditionSubCauseCode) <br>
* _hazardousLocation-ObstacleOnTheRoad10_ of type [**HazardousLocation-ObstacleOnTheRoadSubCauseCode**](#HazardousLocation-ObstacleOnTheRoadSubCauseCode) <br>
* _hazardousLocation-AnimalOnTheRoad11_ of type [**HazardousLocation-AnimalOnTheRoadSubCauseCode**](#HazardousLocation-AnimalOnTheRoadSubCauseCode) <br>
* _humanPresenceOnTheRoad12_ of type [**HumanPresenceOnTheRoadSubCauseCode**](#HumanPresenceOnTheRoadSubCauseCode) <br>
* _reserved13_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _wrongWayDriving14_ of type [**WrongWayDrivingSubCauseCode**](#WrongWayDrivingSubCauseCode) <br>
* _rescueAndRecoveryWorkInProgress15_ of type [**RescueAndRecoveryWorkInProgressSubCauseCode**](#RescueAndRecoveryWorkInProgressSubCauseCode) <br>
* _reserved16_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _adverseWeatherCondition-ExtremeWeatherCondition17_ of type [**AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode**](#AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode) <br>
* _adverseWeatherCondition-Visibility18_ of type [**AdverseWeatherCondition-VisibilitySubCauseCode**](#AdverseWeatherCondition-VisibilitySubCauseCode) <br>
* _adverseWeatherCondition-Precipitation19_ of type [**AdverseWeatherCondition-PrecipitationSubCauseCode**](#AdverseWeatherCondition-PrecipitationSubCauseCode) <br>
* _violence20_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved21_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved22_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved23_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved24_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved25_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _slowVehicle26_ of type [**SlowVehicleSubCauseCode**](#SlowVehicleSubCauseCode) <br>
* _dangerousEndOfQueue27_ of type [**DangerousEndOfQueueSubCauseCode**](#DangerousEndOfQueueSubCauseCode) <br>
* _publicTransportVehicleApproaching28_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
6582
6583
6584
6585
6586
6587
6588
6589
6590
6591
6592
6593
6594
6595
6596
6597
6598
6599
6600
6601
6602
6603
6604
6605
6606
6607
6608
6609
6610
6611
6612
6613
6614
6615
6616
6617
6618
6619
6620
6621
6622
6623
6624
6625
6626
6627
6628
6629
6630
6631
6632
6633
6634
6635
6636
6637
6638
6639
6640
6641
6642
6643
6644
6645
6646
6647
6648
6649
6650
6651
6652
6653
6654
6655
6656
6657
6658
6659
6660
6661
6662
6663
6664
6665
6666
6667
6668
6669
6670
6671
6672
6673
6674
6675
6676
6677
6678
6679
6680
6681
* _reserved29_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved30_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved31_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved32_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved33_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved34_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved35_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved36_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved37_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved38_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved39_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved40_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved41_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved42_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved43_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved44_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved45_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved46_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved47_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved48_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved49_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved50_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved51_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved52_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved53_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved54_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved55_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved56_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved57_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved58_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved59_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved60_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved61_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved62_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved63_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved64_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved65_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved66_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved67_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved68_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved69_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved70_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved71_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved72_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved73_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved74_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved75_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved76_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved77_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved78_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved79_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved80_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved81_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved82_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved83_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved84_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved85_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved86_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved87_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved88_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved89_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved90_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _vehicleBreakdown91_ of type [**VehicleBreakdownSubCauseCode**](#VehicleBreakdownSubCauseCode) <br>
* _postCrash92_ of type [**PostCrashSubCauseCode**](#PostCrashSubCauseCode) <br>
* _humanProblem93_ of type [**HumanProblemSubCauseCode**](#HumanProblemSubCauseCode) <br>
* _stationaryVehicle94_ of type [**StationaryVehicleSubCauseCode**](#StationaryVehicleSubCauseCode) <br>
* _emergencyVehicleApproaching95_ of type [**EmergencyVehicleApproachingSubCauseCode**](#EmergencyVehicleApproachingSubCauseCode) <br>
* _hazardousLocation-DangerousCurve96_ of type [**HazardousLocation-DangerousCurveSubCauseCode**](#HazardousLocation-DangerousCurveSubCauseCode) <br>
* _collisionRisk97_ of type [**CollisionRiskSubCauseCode**](#CollisionRiskSubCauseCode) <br>
* _signalViolation98_ of type [**SignalViolationSubCauseCode**](#SignalViolationSubCauseCode) <br>
* _dangerousSituation99_ of type [**DangerousSituationSubCauseCode**](#DangerousSituationSubCauseCode) <br>
* _railwayLevelCrossing100_ of type [**RailwayLevelCrossingSubCauseCode**](#RailwayLevelCrossingSubCauseCode) <br>
* _reserved101_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved102_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved103_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved104_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved105_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved106_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved107_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved108_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved109_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved110_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved111_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved112_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved113_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved114_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved115_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved116_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved117_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved118_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved119_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved120_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved121_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved122_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved123_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved124_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved125_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved126_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved127_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
* _reserved128_ of type [**SubCauseCodeType**](#SubCauseCodeType) <br>
**Categories:** Traffic information
**Revision:** _Created in V2.1.1, the type of impassability5 changed to ImpassabilitySubCauseCode in V2.2.1, value 28 added in V2.2.1, definition of value 12 and 95 changed in V2.2.1_
NOTE: this DF is defined for use as part of CauseCodeV2. It is recommended to use CauseCodeV2.
reserved0 SubCauseCodeType,
trafficCondition1 TrafficConditionSubCauseCode,
accident2 AccidentSubCauseCode,
roadworks3 RoadworksSubCauseCode,
reserved4 SubCauseCodeType,
6699
6700
6701
6702
6703
6704
6705
6706
6707
6708
6709
6710
6711
6712
6713
6714
6715
6716
6717
6718
6719
6720
adverseWeatherCondition-Adhesion6 AdverseWeatherCondition-AdhesionSubCauseCode,
aquaplaning7 SubCauseCodeType,
reserved8 SubCauseCodeType,
hazardousLocation-SurfaceCondition9 HazardousLocation-SurfaceConditionSubCauseCode,
hazardousLocation-ObstacleOnTheRoad10 HazardousLocation-ObstacleOnTheRoadSubCauseCode,
hazardousLocation-AnimalOnTheRoad11 HazardousLocation-AnimalOnTheRoadSubCauseCode,
humanPresenceOnTheRoad12 HumanPresenceOnTheRoadSubCauseCode,
reserved13 SubCauseCodeType,
wrongWayDriving14 WrongWayDrivingSubCauseCode,
rescueAndRecoveryWorkInProgress15 RescueAndRecoveryWorkInProgressSubCauseCode,
reserved16 SubCauseCodeType,
adverseWeatherCondition-ExtremeWeatherCondition17 AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode,
adverseWeatherCondition-Visibility18 AdverseWeatherCondition-VisibilitySubCauseCode,
adverseWeatherCondition-Precipitation19 AdverseWeatherCondition-PrecipitationSubCauseCode,
violence20 SubCauseCodeType,
reserved21 SubCauseCodeType,
reserved22 SubCauseCodeType,
reserved23 SubCauseCodeType,
reserved24 SubCauseCodeType,
reserved25 SubCauseCodeType,
slowVehicle26 SlowVehicleSubCauseCode,
dangerousEndOfQueue27 DangerousEndOfQueueSubCauseCode,
publicTransportVehicleApproaching28 SubCauseCodeType,
6722
6723
6724
6725
6726
6727
6728
6729
6730
6731
6732
6733
6734
6735
6736
6737
6738
6739
6740
6741
6742
6743
6744
6745
6746
6747
6748
6749
6750
6751
6752
6753
6754
6755
6756
6757
6758
6759
6760
6761
6762
6763
6764
6765
6766
6767
6768
6769
6770
6771
6772
6773
6774
6775
6776
6777
6778
6779
6780
6781
6782
6783
6784
6785
6786
6787
6788
6789
6790
6791
6792
6793
6794
6795
6796
6797
6798
6799
6800
6801
6802
6803
6804
6805
6806
6807
6808
6809
6810
6811
6812
6813
6814
6815
6816
6817
6818
6819
6820
6821
reserved29 SubCauseCodeType,
reserved30 SubCauseCodeType,
reserved31 SubCauseCodeType,
reserved32 SubCauseCodeType,
reserved33 SubCauseCodeType,
reserved34 SubCauseCodeType,
reserved35 SubCauseCodeType,
reserved36 SubCauseCodeType,
reserved37 SubCauseCodeType,
reserved38 SubCauseCodeType,
reserved39 SubCauseCodeType,
reserved40 SubCauseCodeType,
reserved41 SubCauseCodeType,
reserved42 SubCauseCodeType,
reserved43 SubCauseCodeType,
reserved44 SubCauseCodeType,
reserved45 SubCauseCodeType,
reserved46 SubCauseCodeType,
reserved47 SubCauseCodeType,
reserved48 SubCauseCodeType,
reserved49 SubCauseCodeType,
reserved50 SubCauseCodeType,
reserved51 SubCauseCodeType,
reserved52 SubCauseCodeType,
reserved53 SubCauseCodeType,
reserved54 SubCauseCodeType,
reserved55 SubCauseCodeType,
reserved56 SubCauseCodeType,
reserved57 SubCauseCodeType,
reserved58 SubCauseCodeType,
reserved59 SubCauseCodeType,
reserved60 SubCauseCodeType,
reserved61 SubCauseCodeType,
reserved62 SubCauseCodeType,
reserved63 SubCauseCodeType,
reserved64 SubCauseCodeType,
reserved65 SubCauseCodeType,
reserved66 SubCauseCodeType,
reserved67 SubCauseCodeType,
reserved68 SubCauseCodeType,
reserved69 SubCauseCodeType,
reserved70 SubCauseCodeType,
reserved71 SubCauseCodeType,
reserved72 SubCauseCodeType,
reserved73 SubCauseCodeType,
reserved74 SubCauseCodeType,
reserved75 SubCauseCodeType,
reserved76 SubCauseCodeType,
reserved77 SubCauseCodeType,
reserved78 SubCauseCodeType,
reserved79 SubCauseCodeType,
reserved80 SubCauseCodeType,
reserved81 SubCauseCodeType,
reserved82 SubCauseCodeType,
reserved83 SubCauseCodeType,
reserved84 SubCauseCodeType,
reserved85 SubCauseCodeType,
reserved86 SubCauseCodeType,
reserved87 SubCauseCodeType,
reserved88 SubCauseCodeType,
reserved89 SubCauseCodeType,
reserved90 SubCauseCodeType,
vehicleBreakdown91 VehicleBreakdownSubCauseCode,
postCrash92 PostCrashSubCauseCode,
humanProblem93 HumanProblemSubCauseCode,
stationaryVehicle94 StationaryVehicleSubCauseCode,
emergencyVehicleApproaching95 EmergencyVehicleApproachingSubCauseCode,
hazardousLocation-DangerousCurve96 HazardousLocation-DangerousCurveSubCauseCode,
collisionRisk97 CollisionRiskSubCauseCode,
signalViolation98 SignalViolationSubCauseCode,
dangerousSituation99 DangerousSituationSubCauseCode,
railwayLevelCrossing100 RailwayLevelCrossingSubCauseCode,
reserved101 SubCauseCodeType,
reserved102 SubCauseCodeType,
reserved103 SubCauseCodeType,
reserved104 SubCauseCodeType,
reserved105 SubCauseCodeType,
reserved106 SubCauseCodeType,
reserved107 SubCauseCodeType,
reserved108 SubCauseCodeType,
reserved109 SubCauseCodeType,
reserved110 SubCauseCodeType,
reserved111 SubCauseCodeType,
reserved112 SubCauseCodeType,
reserved113 SubCauseCodeType,
reserved114 SubCauseCodeType,
reserved115 SubCauseCodeType,
reserved116 SubCauseCodeType,
reserved117 SubCauseCodeType,
reserved118 SubCauseCodeType,
reserved119 SubCauseCodeType,
reserved120 SubCauseCodeType,
reserved121 SubCauseCodeType,
reserved122 SubCauseCodeType,
reserved123 SubCauseCodeType,
reserved124 SubCauseCodeType,
reserved125 SubCauseCodeType,
reserved126 SubCauseCodeType,
reserved127 SubCauseCodeType,
reserved128 SubCauseCodeType
}
```
### <a name="CauseCodeV2"></a>CauseCodeV2
This DF is an alternative representation of the cause code value of a traffic event.
* _ccAndScc_ of type [**CauseCodeChoice**](#CauseCodeChoice) <br>
the main cause of a detected event. Each entry is of a different type and represents the sub cause code.
The semantics of the entire DF are completely defined by the choice value which represents the cause code value.
The interpretation of the sub cause code value may provide additional information that is not strictly necessary to understand
the cause code itself, and is therefore optional.
**Categories:** Traffic information
**Revision:** _Created in V2.1.1, description amended in V2.2.1_
```asn1
CauseCodeV2 ::= SEQUENCE {
ccAndScc CauseCodeChoice,
}
```
### <a name="CenDsrcTollingZone"></a>CenDsrcTollingZone
The DF describes the position of a CEN DSRC road side equipment.
* _protectedZoneLatitude_ of type [**Latitude**](#Latitude) <br>
the latitude of the CEN DSRC road side equipment.
* _protectedZoneLongitude_ of type [**Longitude**](#Longitude) <br>
the latitude of the CEN DSRC road side equipment.
* _cenDsrcTollingZoneId_ of type [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL<br>
* cenDsrcTollingZoneID<br>
the optional ID of the CEN DSRC road side equipment.
**Categories:** Infrastructure information Communication information
**Revision:** _revised in V2.1.1 (cenDsrcTollingZoneId is directly of type ProtectedZoneId)_
```asn1
CenDsrcTollingZone ::= SEQUENCE {
protectedZoneLatitude Latitude,
protectedZoneLongitude Longitude,
cenDsrcTollingZoneId ProtectedZoneId OPTIONAL,
...
}
```
### <a name="CircularShape"></a>CircularShape
This DF represents the shape of a circular area or a right cylinder that is centred on the shape's reference point.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
optional reference point that represents the centre of the circle, relative to an externally specified reference position.
If this component is absent, the externally specified reference position represents the shape's reference point.
* _radius_ of type [**StandardLength12b**](#StandardLength12b) <br>
* _height_ of type [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
the optional height, present if the shape is a right cylinder extending in the positive z-axis.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
shapeReferencePoint CartesianPosition3d OPTIONAL,
radius StandardLength12b,
height StandardLength12b OPTIONAL
}
```
### <a name="ClosedLanes"></a>ClosedLanes
This DF indicates the opening/closure status of the lanes of a carriageway.
* _innerhardShoulderStatus_ of type [**HardShoulderStatus**](#HardShoulderStatus) OPTIONAL<br>
this information is optional and shall be included if an inner hard shoulder is present and the information is known.
It indicates the open/closing status of inner hard shoulder lanes.
* _outerhardShoulderStatus_ of type [**HardShoulderStatus**](#HardShoulderStatus) OPTIONAL<br>
this information is optional and shall be included if an outer hard shoulder is present and the information is known.
It indicates the open/closing status of outer hard shoulder lanes.
* _drivingLaneStatus_ of type [**DrivingLaneStatus**](#DrivingLaneStatus) OPTIONAL<br>
this information is optional and shall be included if the information is known.
It indicates the open/closing status of driving lanes.
For carriageways with more than 13 driving lanes, the drivingLaneStatus component shall not be present.
**Categories:** Infrastructure information Road topology information
**Revision:** _Description revised in V2.1.1_
```asn1
ClosedLanes ::= SEQUENCE {
innerhardShoulderStatus HardShoulderStatus OPTIONAL,
outerhardShoulderStatus HardShoulderStatus OPTIONAL,
drivingLaneStatus DrivingLaneStatus OPTIONAL,
...
}
```
### <a name="ClusterBreakupInfo"></a>ClusterBreakupInfo
This DF provides information about the breakup of a cluster.
* _clusterBreakupReason_ of type [**ClusterBreakupReason**](#ClusterBreakupReason) <br>
* _breakupTime_ of type [**DeltaTimeQuarterSecond**](#DeltaTimeQuarterSecond) <br>
**Categories:** Cluster Information
**Revision:** _Created in V2.1.1_
```asn1
ClusterBreakupInfo ::= SEQUENCE {
clusterBreakupReason ClusterBreakupReason,
breakupTime DeltaTimeQuarterSecond,
...
}
```
### <a name="ClusterJoinInfo"></a>ClusterJoinInfo
This DF provides information about the joining of a cluster.
* _clusterId_ of type [**Identifier1B**](#Identifier1B) <br>
* _joinTime_ of type [**DeltaTimeQuarterSecond**](#DeltaTimeQuarterSecond) <br>
**Categories:** Cluster Information
**Revision:** _Created in V2.1.1_
joinTime DeltaTimeQuarterSecond,
...
}
```
### <a name="ClusterLeaveInfo"></a>ClusterLeaveInfo
The DF provides information about the leaving of a cluster.
* _clusterId_ of type [**Identifier1B**](#Identifier1B) <br>
* _clusterLeaveReason_ of type [**ClusterLeaveReason**](#ClusterLeaveReason) <br>
**Categories:** Cluster Information
**Revision:** _Created in V2.1.1_
clusterLeaveReason ClusterLeaveReason,
...
}
```
### <a name="CorrelationColumn"></a>CorrelationColumn
This DF represents a column of a lower triangular positive semi-definite matrix and consists of a list of correlation cell values ordered by rows.
Given a matrix "A" of size n x n, the number of columns to be included in the lower triangular matrix is k=n-1.
Each column "i" of the lower triangular matrix then contains k-(i-1) values (ordered by rows from 1 to n-1), where "i" refers to the column number count
**Categories:** Sensing Information
**Revision:** _Created in V2.1.1_
CorrelationColumn ::= SEQUENCE SIZE (1..13,...) OF CorrelationCellValue
```
### <a name="Curvature"></a>Curvature
This DF represents the curvature of the vehicle trajectory and the associated confidence value.
The curvature detected by a vehicle represents the curvature of actual vehicle trajectory.
* _curvatureValue_ of type [**CurvatureValue**](#CurvatureValue) <br>
Detected curvature of the vehicle trajectory.
* _curvatureConfidence_ of type [**CurvatureConfidence**](#CurvatureConfidence) <br>
along with a confidence value of the curvature value with a predefined confidence level.
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
```asn1
Curvature ::= SEQUENCE {
curvatureValue CurvatureValue,
curvatureConfidence CurvatureConfidence
}
```
### <a name="DangerousGoodsExtended"></a>DangerousGoodsExtended
This DF provides a description of dangerous goods being carried by a heavy vehicle.
* _dangerousGoodsType_ of type [**DangerousGoodsBasic**](#DangerousGoodsBasic) <br>
a 4-digit number that identifies the substance of the dangerous goods as specified in
United Nations Recommendations on the Transport of Dangerous Goods - Model Regulations [[4]](#references),
whether the carried dangerous goods are transported at high temperature.
If yes, the value shall be set to TRUE,
whether the heavy vehicle carrying dangerous goods is restricted to enter tunnels.
If yes, the value shall be set to TRUE,
whether the carried dangerous goods are packed with limited quantity.
If yes, the value shall be set to TRUE,
* _emergencyActionCode_ of type [**IA5String**](#IA5String) (SIZE (1..24)) OPTIONAL<br>
physical signage placard at the vehicle that carries information on how an emergency
service should deal with an incident. This component is optional; it shall be present if the information is available.
* _phoneNumber_ of type [**PhoneNumber**](#PhoneNumber) OPTIONAL<br>
contact phone number of assistance service in case of incident or accident.
This component is optional, it shall be present if the information is available.
* _companyName_ of type [**UTF8String**](#UTF8String) (SIZE (1..24)) OPTIONAL<br>
name of company that manages the transportation of the dangerous goods.
This component is optional; it shall be present if the information is available.
**Categories:** Vehicle information
```asn1
DangerousGoodsExtended ::= SEQUENCE {
dangerousGoodsType DangerousGoodsBasic,
unNumber INTEGER (0..9999),
elevatedTemperature BOOLEAN,
tunnelsRestricted BOOLEAN,
limitedQuantity BOOLEAN,
emergencyActionCode IA5String (SIZE (1..24)) OPTIONAL,
phoneNumber PhoneNumber OPTIONAL,
companyName UTF8String (SIZE (1..24)) OPTIONAL,
}
```
### <a name="DeltaReferencePosition"></a>DeltaReferencePosition
This DF defines a geographical point position as a 3 dimensional offset position to a geographical reference point.
* _deltaLatitude_ of type [**DeltaLatitude**](#DeltaLatitude) <br>
A delta latitude offset with regards to the latitude value of the reference position.
* _deltaLongitude_ of type [**DeltaLongitude**](#DeltaLongitude) <br>
A delta longitude offset with regards to the longitude value of the reference position.
* _deltaAltitude_ of type [**DeltaAltitude**](#DeltaAltitude) <br>
A delta altitude offset with regards to the altitude value of the reference position.
**Categories:** GeoReference information
```asn1
DeltaReferencePosition ::= SEQUENCE {
deltaLatitude DeltaLatitude,
deltaLongitude DeltaLongitude,
deltaAltitude DeltaAltitude
}
```
### <a name="DigitalMap"></a>DigitalMap
This DF represents a portion of digital map. It shall contain a list of waypoints [**ReferencePosition**](#ReferencePosition).
**Categories:** GeoReference information
```asn1
DigitalMap ::= SEQUENCE (SIZE(1..256)) OF ReferencePosition
```
### <a name="EllipticalShape"></a>EllipticalShape
This DF represents the shape of an elliptical area or right elliptical cylinder that is centred
on the shape's reference point defined outside of the context of this DF and oriented w.r.t. a
cartesian coordinate system defined outside of the context of this DF.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
optional reference point which represents the centre of the ellipse,
relative to an externally specified reference position. If this component is absent, the
externally specified reference position represents the shape's reference point.
* _semiMajorAxisLength_ of type [**StandardLength12b**](#StandardLength12b) <br>
half length of the major axis of the ellipse located in the X-Y Plane.
* _semiMinorAxisLength_ of type [**StandardLength12b**](#StandardLength12b) <br>
half length of the minor axis of the ellipse located in the X-Y Plane.
* _orientation_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
the optional orientation of the major axis of the ellipse, measured with
positive values turning around the z-axis using the right-hand rule, starting from the X-axis.
* _height_ of type [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
the optional height, present if the shape is a right elliptical cylinder extending
in the positive Z-axis.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1, the type of the field orientation changed and the description revised in V2.2.1_
semiMajorAxisLength StandardLength12b,
semiMinorAxisLength StandardLength12b,
### <a name="EulerAnglesWithConfidence"></a>EulerAnglesWithConfidence
This DF represents the Euler angles which describe the orientation of an object bounding box in a Cartesian coordinate system with an associated confidence level for each angle.
It shall include the following components:
* _zAngle_ of type [**CartesianAngle**](#CartesianAngle) <br>
z-angle of object bounding box at the time of measurement, with the associated confidence.
The angle is measured with positive values considering the object orientation turning around the z-axis using the right-hand rule, starting from the x-axis.
This extrinsic rotation shall be applied around the centre point of the object bounding box before all other rotations.
* _yAngle_ of type [**CartesianAngle**](#CartesianAngle) OPTIONAL<br>
optional y-angle of object bounding box at the time of measurement, with the associated confidence.
The angle is measured with positive values considering the object orientation turning around the y-axis using the right-hand rule, starting from the z-axis.
This extrinsic rotation shall be applied around the centre point of the object bounding box after the rotation by zAngle and before the rotation by xAngle.
* _xAngle_ of type [**CartesianAngle**](#CartesianAngle) OPTIONAL<br>
optional x-angle of object bounding box at the time of measurement, with the associated confidence.
The angle is measured with positive values considering the object orientation turning around the x-axis using the right-hand rule, starting from the z-axis.
This extrinsic rotation shall be applied around the centre point of the object bounding box after all other rotations.
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
EulerAnglesWithConfidence ::= SEQUENCE {
zAngle CartesianAngle,
yAngle CartesianAngle OPTIONAL,
xAngle CartesianAngle OPTIONAL
}
```
### <a name="EuVehicleCategoryCode"></a>EuVehicleCategoryCode
This DF represents a vehicle category according to the UNECE/TRANS/WP.29/78/Rev.4 [[16]](#references).
* _euVehicleCategoryL_ of type [**EuVehicleCategoryL**](#EuVehicleCategoryL) <br>
* _euVehicleCategoryM_ of type [**EuVehicleCategoryM**](#EuVehicleCategoryM) <br>
* _euVehicleCategoryN_ of type [**EuVehicleCategoryN**](#EuVehicleCategoryN) <br>
* _euVehicleCategoryO_ of type [**EuVehicleCategoryO**](#EuVehicleCategoryO) <br>
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
```asn1
EuVehicleCategoryCode ::= CHOICE {
euVehicleCategoryL EuVehicleCategoryL,
euVehicleCategoryM EuVehicleCategoryM,
euVehicleCategoryN EuVehicleCategoryN,
euVehicleCategoryO EuVehicleCategoryO,
euVehicleCategoryT NULL,
euVehicleCategoryG NULL
```
### <a name="EventHistory"></a>EventHistory
The DF shall contain a list of [**EventPoint**](#EventPoint).
The eventPosition of each [**EventPoint**](#EventPoint) is defined with respect to the previous [**EventPoint**](#EventPoint) in the list.
Except for the first [**EventPoint**](#EventPoint) which is defined with respect to a position outside of the context of this DF.
**Categories:** GeoReference information Traffic information
**Revision:** _Generalized the semantics in V2.1.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**EventZone**](#EventZone) instead.
```asn1
EventHistory::= SEQUENCE (SIZE(1..23)) OF EventPoint
```
### <a name="EventPoint"></a>EventPoint
This DF provides information related to an event at a defined position.
* _eventPosition_ of type [**DeltaReferencePosition**](#DeltaReferencePosition) <br>
offset position of a detected event point to a defined position.
* _eventDeltaTime_ of type [**PathDeltaTime**](#PathDeltaTime) OPTIONAL<br>
optional time travelled by the detecting ITS-S since the previous detected event point.
* _informationQuality_ of type [**InformationQuality**](#InformationQuality) <br>
Information quality of the detection for this event point.
**Categories:** GeoReference information Traffic information
**Revision:** _generalized the semantics in V2.1.1_
```asn1
EventPoint ::= SEQUENCE {
eventPosition DeltaReferencePosition,
eventDeltaTime PathDeltaTime OPTIONAL,
informationQuality InformationQuality
}
```
The DF shall contain a list of [**EventPoint**](#EventPoint), where all [**EventPoint**](#EventPoint) either contain the COMPONENT eventDeltaTime
The eventPosition of each [**EventPoint**](#EventPoint) is defined with respect to the previous [**EventPoint**](#EventPoint) in the list.
Except for the first [**EventPoint**](#EventPoint) which is defined with respect to a position outside of the context of this DF.
**Categories:** GeoReference information Traffic information
**Revision:** _created in V2.1.1 based on EventHistory_
EventZone::= EventHistory
((WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime PRESENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime ABSENT})))
7297
7298
7299
7300
7301
7302
7303
7304
7305
7306
7307
7308
7309
7310
7311
7312
7313
7314
7315
7316
7317
7318
### <a name="GeoPosition"></a>GeoPosition
This DF indicates a geographical position.
It shall include the following components:
* _latitude_ of type [**Latitude**](#Latitude) <br>
the latitude of the geographical position.
* _longitude_ of type [**Longitude**](#Longitude) <br>
the longitude of the geographical position.
* _altitude_ of type [**AltitudeValue**](#AltitudeValue) DEFAULT unavailable<br>
the altitude of the geographical position with default value unavailable.
```asn1
GeoPosition::= SEQUENCE{
latitude Latitude,
longitude Longitude,
altitude AltitudeValue DEFAULT unavailable
}
```
### <a name="GeneralizedLanePosition"></a>GeneralizedLanePosition
This DF represents the top-level DF to represent a lane position. A lane position is a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway.
* _lanePositionBased_ of type [**LanePositionOptions**](#LanePositionOptions) <br>
lane position information for a defined reference position.
* _mapBased_ of type [**MapPosition**](#MapPosition) OPTIONAL<br>
optional lane position information described in the context of a MAPEM as specified in ETSI TS 103 301 [[15]](#references).
If present, it shall describe the same reference position using the lane identification in the MAPEM. This component can be used only if a MAPEM is available for the reference position
(e.g. on an intersection): In this case it is used as a synonym to the mandatory component lanePositionBased.
* _confidence_ of type [**MetaInformation**](#MetaInformation) <br>
confidence information for expressing the probability that the object is located at the indicated lane.
If the value of the component lanePositionBased is generated directly from the absolute reference position and reference topology information,
no sensor shall be indicated in the component usedDetectionInformation of the [**MetaInformation**](#MetaInformation).
**Categories:** Road Topology information
**Revision:** _newly created in V2.2.1. The previous DF GeneralizedLanePosition is now renamed to [**LanePositionOptions**](#LanePositionOptions)._
>>>
NOTE: This DF is the most general way to represent a lane position: it provides a complete set of information regarding a transversal (dimensionless) position on the carriageway at a specific
reference position, i.e. it provides different options and synonyms to represent the lane at which the reference position (the point) is located. A confidence is used to describe the probability
that the object is located in the provided lane. The dimension of the object or extension of an area are not considered: See [**OccupiedLanesWithConfidence**](#OccupiedLanesWithConfidence) for describing the occupation of lanes,
where the dimensions of an object or the extension of an area is considered.
>>>
GeneralizedLanePosition ::= SEQUENCE {
lanePositionBased LanePositionOptions,
mapBased MapPosition OPTIONAL,
confidence MetaInformation,
...
### <a name="GeneralizedLanePositions"></a>GeneralizedLanePositions
This DF represents transversal position information with respect to the road, at an externally defined reference position. It shall contain a set of up to `4` [**GeneralizedLanePosition**](#GeneralizedLanePosition).
Multiple entries can be used to describe several lane positions with the associated confidence, in cases where the reference position cannot be mapped to a single lane.
**Categories:** Road Topology information
**Revision:** _Created in V2.2.1_
```asn1
GeneralizedLanePositions ::= SEQUENCE (SIZE(1..4)) OF GeneralizedLanePosition
```
This DF represents the Heading in a WGS84 co-ordinates system.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
* _headingValue_ of type [**HeadingValue**](#HeadingValue) <br>
* _headingConfidence_ of type [**HeadingConfidence**](#HeadingConfidence) <br>
the confidence value of the heading value with a predefined confidence level.
**Categories:** Kinematic Information
**Revision:** _Description revised in V2.1.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**Wgs84Angle**](#Wgs84Angle) instead.
```asn1
Heading ::= SEQUENCE {
headingValue HeadingValue,
headingConfidence HeadingConfidence
}
```
### <a name="HeadingChangeIndication"></a>HeadingChangeIndication
This DF provides information associated to heading change indicators such as a change of direction.
* _direction_ of type [**TurningDirection**](#TurningDirection) <br>
* _actionDeltaTime_ of type [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) <br>
the period over which a direction change action is performed.
**Categories:** Kinematic Information
**Revision:** _created in V2.1.1_
```asn1
HeadingChangeIndication ::= SEQUENCE {
direction TurningDirection,
actionDeltaTime DeltaTimeTenthOfSecond,
...
}
```
### <a name="InterferenceManagementChannel"></a>InterferenceManagementChannel
* _centreFrequency_ of type **INTEGER** (1 .. 99999)<br>
the centre frequency of the channel in 10<sup>(exp+2)</sup> Hz (where exp is exponent)
* _channelWidth_ of type **INTEGER** (0 .. 9999)<br>
width of the channel in 10<sup>exp</sup> Hz (where exp is exponent)
exponent of the power of 10 used in the calculation of the components above.
**Categories:** Communication information
**Revision:** _created in V2.1.1_
```asn1
InterferenceManagementChannel ::= SEQUENCE {
centreFrequency INTEGER (1 .. 99999),
channelWidth INTEGER (0 .. 9999),
exponent INTEGER (0 .. 15)
}
```
### <a name="InterferenceManagementZone"></a>InterferenceManagementZone
This DF represents a zone inside which the ITS communication should be restricted in order to manage interference.
* _zoneDefinition_ of type [**InterferenceManagementZoneDefinition**](#InterferenceManagementZoneDefinition) <br>
contains the geographical definition of the zone.
* _managementInfo_ of type [**InterferenceManagementInfo**](#InterferenceManagementInfo) <br>
contains interference management information applicable in the zone defined in the component zoneDefinition.
**Categories:** Communication information
**Revision:** _created in V2.1.1_
```asn1
InterferenceManagementZone ::= SEQUENCE {
zoneDefinition InterferenceManagementZoneDefinition,
managementInfo InterferenceManagementInfo
}
```
### <a name="InterferenceManagementZoneDefinition"></a>InterferenceManagementZoneDefinition
This DF represents the geographical definition of the zone where band sharing occurs.
* _interferenceManagementZoneLatitude_ of type [**Latitude**](#Latitude) <br>
Latitude of the centre point of the interference management zone.
* _interferenceManagementZoneLongitude_ of type [**Longitude**](#Longitude) <br>
Longitude of the centre point of the interference management zone.
* _interferenceManagementZoneId_ of type [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL<br>
optional identification of the interference management zone.
* _interferenceManagementZoneShape_ of type [**Shape**](#Shape) <br>
shape of the interference management zone placed at the centre point.
**Categories:** Communication information
**Revision:** _created in V2.1.1_
```asn1
InterferenceManagementZoneDefinition::= SEQUENCE{
interferenceManagementZoneLatitude Latitude,
interferenceManagementZoneLongitude Longitude,
interferenceManagementZoneId ProtectedZoneId OPTIONAL,
interferenceManagementZoneShape Shape
(WITH COMPONENTS{..., radial ABSENT, radialShapes ABSENT}) OPTIONAL,
...
}
```
### <a name="InterferenceManagementInfo"></a>InterferenceManagementInfo
This DF shall contain a list of up to 16 definitions containing interference management information, per affected frequency channels.
**Categories:** Communication information.
**Revision:** _created in V2.1.1_
```asn1
InterferenceManagementInfo::= SEQUENCE (SIZE(1..16,...)) OF InterferenceManagementInfoPerChannel
```
### <a name="InterferenceManagementInfoPerChannel"></a>InterferenceManagementInfoPerChannel
This DF contains interference management information for one affected frequency channel.
* _interferenceManagementChannel_ of type [**InterferenceManagementChannel**](#InterferenceManagementChannel) <br>
frequency channel for which the zone should be applied interference management
* _interferenceManagementZoneType_ of type [**InterferenceManagementZoneType**](#InterferenceManagementZoneType) <br>
* _interferenceManagementMitigationType_ of type [**MitigationForTechnologies**](#MitigationForTechnologies) OPTIONAL<br>
optional type of the mitigation to be used in the interference management zone.
In the case where no mitigation should be applied by the ITS-S, this is indicated by the field interferenceManagementMitigationType being absent.
* _expiryTime_ of type [**TimestampIts**](#TimestampIts) OPTIONAL<br>
optional time at which the validity of the interference management communication zone will expire.
This component is present when the interference management is temporarily valid
**Categories:** Communication information
**Revision:** _created in V2.1.1_
```asn1
InterferenceManagementInfoPerChannel ::= SEQUENCE {
interferenceManagementChannel InterferenceManagementChannel,
interferenceManagementZoneType InterferenceManagementZoneType,
interferenceManagementMitigationType MitigationForTechnologies OPTIONAL,
expiryTime TimestampIts OPTIONAL,
...
}
```
### <a name="InterferenceManagementZones"></a>InterferenceManagementZones
This DF shall contain a list of up to 16 interference management zones.
**EXAMPLE**: An interference management communication zone may be defined around a CEN DSRC road side equipment or an urban rail operational area.
**Categories:** Communication information
**Revision:** _created in V2.1.1_
```asn1
InterferenceManagementZones ::= SEQUENCE (SIZE(1..16), ...) OF InterferenceManagementZone
```
### <a name="IntersectionReferenceId"></a>IntersectionReferenceId
This DF represents a unique id for an intersection, in accordance with ETSI TS 103 301 [[15]](#references).
* _region_ of type [**Identifier2B**](#Identifier2B) OPTIONAL<br>
the optional identifier of the entity that is responsible for the region in which the intersection is placed.
It is the duty of that entity to guarantee that the [**Id**](#Id) is unique within the region.
* _id_ of type [**Identifier2B**](#Identifier2B) <br>
**Categories:** Road topology information
**Revision:** _created in V2.1.1_
NOTE: when the component region is present, the IntersectionReferenceId is guaranteed to be globally unique.
```asn1
IntersectionReferenceId ::= SEQUENCE {
region Identifier2B OPTIONAL,
id Identifier2B
}
```
### <a name="ItineraryPath"></a>ItineraryPath
This DF shall contain a list of waypoints [**ReferencePosition**](#ReferencePosition).
**Categories:** GeoReference information
**Revision:** _Editorial update in V2.1.1_
```asn1
ItineraryPath ::= SEQUENCE SIZE(1..40) OF ReferencePosition
```
### <a name="ItsPduHeader"></a>ItsPduHeader
This DF represents a common message header for application and facilities layer messages.
It is included at the beginning of an ITS message as the message header.
* _protocolVersion_ of type [**OrdinalNumber1B**](#OrdinalNumber1B) <br>
* _messageId_ of type [**MessageId**](#MessageId) <br>
* _stationId_ of type [**StationId**](#StationId) <br>
the identifier of the ITS-S that generated the ITS message.
**Categories:** Communication information
**Revision:** _update in V2.1.1: messageID and stationID changed to messageId and stationId; messageId is of type MessageId._
7621
7622
7623
7624
7625
7626
7627
7628
7629
7630
7631
7632
7633
7634
7635
7636
7637
7638
7639
7640
7641
7642
7643
7644
7645
7646
7647
7648
7649
7650
7651
7652
### <a name="IvimReference"></a>IvimReference
This DF provides the reference to the information contained in a IVIM according to ETSI TS 103 301 [[15]](#references).
It shall include the following components:
* _serviceProviderId_ of type [**Provider**](#Provider) <br>
identifier of the organization that provided the IVIM.
* _iviIdentificationNumber_ of type [**IviIdentificationNumber**](#IviIdentificationNumber) <br>
identifier of the IVIM, as assigned by the organization identified in serviceProviderId.
**Categories:** Communication information
**Revision:** _Created in V2.2.1_
```asn1
IvimReference::= SEQUENCE {
serviceProviderId Provider,
iviIdentificationNumber IviIdentificationNumber
}
```
### <a name="IvimReferences"></a>IvimReferences
This DF shall contain a list of [**IvimReference**](#IvimReference).
**Categories:** Communication information
**Revision:** _Created in V2.2.1_
```asn1
IvimReferences::= SEQUENCE (SIZE(1..8,...)) OF IvimReference
```
### <a name="LanePositionAndType"></a>LanePositionAndType
This DF indicates a transversal position in resolution of lanes and other associated details.
* _transversalPosition_ of type [**LanePosition**](#LanePosition) <br>
* _laneType_ of type [**LaneType**](#LaneType) DEFAULT traffic<br>
the type of the lane identified in the component transversalPosition. By default set to `traffic`.
* _direction_ of type [**Direction**](#Direction) DEFAULT sameDirection<br>
the traffic direction for the lane position relative to a defined reference direction. By default set to `sameDirection`, i.e. following the reference direction.
**Categories:** Road topology information
**Revision:** _direction added in V2.2.1_
```asn1
LanePositionAndType::= SEQUENCE {
transversalPosition LanePosition,
7674
7675
7676
7677
7678
7679
7680
7681
7682
7683
7684
7685
7686
7687
7688
7689
7690
7691
7692
7693
7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713
7714
7715
7716
7717
7718
7719
7720
7721
7722
7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734
7735
7736
7737
laneType LaneType DEFAULT traffic,
direction Direction DEFAULT sameDirection,
...
}
```
### <a name="LanePositionOptions"></a>LanePositionOptions
This DF represents a set of options to describe a lane position and is the second level DF to represent a lane position. The top-level DFs are [**GeneralizedLanePosition**](#GeneralizedLanePosition) or [**OccupiedLanesWithConfidence**](#OccupiedLanesWithConfidence).
A lane position is a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway.
The following options are available:
* _simplelanePosition_ of type [**LanePosition**](#LanePosition) <br>
a single lane position without any additional context information.
* _simpleLaneType_ of type [**LaneType**](#LaneType) <br>
a lane type, to be used when the lane position is unknown but the type of lane is known. This can be used in scenarios where a certain confidence about the used lane type is given
but no or limited knowledge about the absolute lane number is available. For example, a cyclist on a cycle-lane or vehicles on a specific lane that is unique for the part of the road (e.g. a bus lane).
* _detailedlanePosition_ of type [**LanePositionAndType**](#LanePositionAndType) <br>
a single lane position with additional lane details.
* _lanePositionWithLateralDetails_ of type [**LanePositionWithLateralDetails**](#LanePositionWithLateralDetails) <br>
a single lane position with additional details and the lateral position within the lane.
* _trafficIslandPosition_ of type [**TrafficIslandPosition**](#TrafficIslandPosition) <br>
a position on a traffic island, i.e. between two lanes.
**Categories:** Road Topology information
**Revision:** _Created in V2.2.1 from the DF GeneralizedLanePosition of V2.1.1._
```asn1
LanePositionOptions ::= CHOICE {
simplelanePosition LanePosition,
simpleLaneType LaneType,
detailedlanePosition LanePositionAndType,
lanePositionWithLateralDetails LanePositionWithLateralDetails,
trafficIslandPosition TrafficIslandPosition,
...
}
```
### <a name="LanePositionWithLateralDetails"></a>LanePositionWithLateralDetails
This DF is a third-level DF that represents a lane position and is an extended version of [**LanePositionAndType**](#LanePositionAndType) that adds the distances to the left and right lane border.
It shall additionally include the following components:
* _COMPONENTS_ of type [**OF**](#OF) LanePositionAndType<br>
* _distanceToLeftBorder_ of type [**StandardLength9b**](#StandardLength9b) <br>
the distance of the transversal position to the left lane border. The real value shall be rounded to the next lower encoding-value.
* _distanceToRightBorder_ of type [**StandardLength9b**](#StandardLength9b) <br>
the distance of the transversal position to the right lane border. The real value shall be rounded to the next lower encoding-value.
**Categories:** Road Topology information
**Revision:** _Created in V2.2.1_
```asn1
LanePositionWithLateralDetails ::= SEQUENCE {
COMPONENTS OF LanePositionAndType,
distanceToLeftBorder StandardLength9b,
distanceToRightBorder StandardLength9b,
...
}
```
### <a name="LateralAcceleration"></a>LateralAcceleration
This DF indicates the vehicle acceleration at lateral direction and the confidence value of the lateral acceleration.
* _lateralAccelerationValue_ of type [**LateralAccelerationValue**](#LateralAccelerationValue) <br>
lateral acceleration value at a point in time.
* _lateralAccelerationConfidence_ of type [**AccelerationConfidence**](#AccelerationConfidence) <br>
confidence value of the lateral acceleration value.
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**AccelerationComponent**](#AccelerationComponent) instead.
```asn1
LateralAcceleration ::= SEQUENCE {
lateralAccelerationValue LateralAccelerationValue,
lateralAccelerationConfidence AccelerationConfidence
}
```
### <a name="LongitudinalAcceleration"></a>LongitudinalAcceleration
This DF indicates the vehicle acceleration at longitudinal direction and the confidence value of the longitudinal acceleration.
* _longitudinalAccelerationValue_ of type [**LongitudinalAccelerationValue**](#LongitudinalAccelerationValue) <br>
longitudinal acceleration value at a point in time.
* _longitudinalAccelerationConfidence_ of type [**AccelerationConfidence**](#AccelerationConfidence) <br>
confidence value of the longitudinal acceleration value.
**Categories:** Vehicle information
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**AccelerationComponent**](#AccelerationComponent) instead.
```asn1
LongitudinalAcceleration ::= SEQUENCE {
longitudinalAccelerationValue LongitudinalAccelerationValue,
longitudinalAccelerationConfidence AccelerationConfidence
}
```
### <a name="LongitudinalLanePosition"></a>LongitudinalLanePosition
This DF represents the estimated position along the longitudinal extension of a carriageway or lane.
* _longitudinalLanePositionValue_ of type [**LongitudinalLanePositionValue**](#LongitudinalLanePositionValue) <br>
the mean value of the longitudinal position along the carriageway or lane w.r.t. an externally defined start position.
* _longitudinalLanePositionConfidence_ of type [**LongitudinalLanePositionConfidence**](#LongitudinalLanePositionConfidence) <br>
**Categories:** Road topology information
**Revision:** _created in V2.1.1, description revised in V2.2.1_
```asn1
LongitudinalLanePosition ::= SEQUENCE {
longitudinalLanePositionValue LongitudinalLanePositionValue,
longitudinalLanePositionConfidence LongitudinalLanePositionConfidence
}
```
### <a name="LowerTriangularPositiveSemidefiniteMatrices"></a>LowerTriangularPositiveSemidefiniteMatrices
This DF shall contain a list of a lower triangular positive semi-definite matrices.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
LowerTriangularPositiveSemidefiniteMatrices::= SEQUENCE SIZE (1..4) OF LowerTriangularPositiveSemidefiniteMatrix
### <a name="LowerTriangularPositiveSemidefiniteMatrix"></a>LowerTriangularPositiveSemidefiniteMatrix
This DF represents a lower triangular positive semi-definite matrix.
* _componentsIncludedIntheMatrix_ of type [**MatrixIncludedComponents**](#MatrixIncludedComponents) <br>
the indication of which components of a [**PerceivedObject**](#PerceivedObject) are included in the matrix.
This component also implicitly indicates the number n of included components which defines the size (n x n) of the full correlation matrix "A".
* _matrix_ of type [**LowerTriangularPositiveSemidefiniteMatrixColumns**](#LowerTriangularPositiveSemidefiniteMatrixColumns) <br>
the list of cells of the lower triangular positive semi-definite matrix ordered by columns and by rows.
The number of columns to be included "k" is equal to the number of included components "n" indicated by componentsIncludedIntheMatrix minus 1: k = n-1.
These components shall be included in the order or their appearance in componentsIncludedIntheMatrix.
Each column "i" of the lowerTriangularCorrelationMatrixColumns contains k-(i-1) values.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
LowerTriangularPositiveSemidefiniteMatrix ::= SEQUENCE{
componentsIncludedIntheMatrix MatrixIncludedComponents,
matrix LowerTriangularPositiveSemidefiniteMatrixColumns
}
```
### <a name="LowerTriangularPositiveSemidefiniteMatrixColumns"></a>LowerTriangularPositiveSemidefiniteMatrixColumns
This DF represents the columns of a lower triangular positive semi-definite matrix, each column not including the main diagonal cell of the matrix.
Given a matrix "A" of size n x n, the number of [**CorrelationColumn**](#CorrelationColumn) to be included in the lower triangular matrix is k=n-1.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1, extension indicator added in V2.2.1_
LowerTriangularPositiveSemidefiniteMatrixColumns ::= SEQUENCE SIZE (1..13,...) OF CorrelationColumn
7865
7866
7867
7868
7869
7870
7871
7872
7873
7874
7875
7876
7877
7878
7879
7880
7881
7882
7883
7884
7885
7886
7887
7888
7889
7890
7891
7892
7893
7894
7895
7896
7897
7898
7899
7900
7901
7902
7903
7904
7905
7906
7907
7908
7909
7910
7911
7912
7913
7914
7915
7916
7917
7918
7919
### <a name="MapemConfiguration"></a>MapemConfiguration
This DF provides information about the configuration of a road section in terms of MAPEM lanes or connections using a list of [**MapemExtractedElementReference**](#MapemExtractedElementReference).
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
MapemConfiguration::= SEQUENCE(SIZE(1..16,...)) OF MapemElementReference
```
### <a name="MapemElementReference"></a>MapemElementReference
This DF provides references to an element described in a MAPEM according to ETSI TS 103 301 [[i.15]](#references), such as a lane or connection at a specific intersection or road segment.
It shall include the following components:
* _mapReference_ of type [**MapReference**](#MapReference) OPTIONAL<br>
the optional reference to a MAPEM that describes the intersection or road segment. It is absent if the MAPEM topology is known from the context.
* _laneIds_ of type [**MapemLaneList**](#MapemLaneList) OPTIONAL<br>
the optional list of the identifiers of the lanes to be referenced.
* _connectionIds_ of type [**MapemConnectionList**](#MapemConnectionList) OPTIONAL<br>
the optional list of the identifiers of the connections to be referenced.
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
MapemElementReference::= SEQUENCE {
mapReference MapReference OPTIONAL,
laneIds MapemLaneList OPTIONAL,
connectionIds MapemConnectionList OPTIONAL,
...
}
((WITH COMPONENTS {..., laneIds PRESENT}) |
(WITH COMPONENTS {..., connectionIds PRESENT }))
```
### <a name="MapemLaneList"></a>MapemLaneList
This DF provides references to MAPEM lanes using a list of [**Identifier1B**](#Identifier1B).
**Categories:** Road topology information
**Revision:** _Created in 2.2.1_
```asn1
MapemLaneList ::= SEQUENCE (SIZE(1..8,...)) OF Identifier1B
```
### <a name="MapemConnectionList"></a>MapemConnectionList
This DF provides references to MAPEM connections using a list of [**Identifier1B**](#Identifier1B).
Note: connections are allowed maneuvers (e.g. an ingress / egress relation) on an intersection.
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
MapemConnectionList ::= SEQUENCE (SIZE(1..8,...)) OF Identifier1B
```
This DF indicates a position on a topology description transmitted in a MAPEM according to ETSI TS 103 301 [[15]](#references).
It shall include the following components:
* _mapReference_ of type [**MapReference**](#MapReference) OPTIONAL<br>
optionally identifies the MAPEM containing the topology information.
It is absent if the MAPEM topology is known from the context.
* _laneId_ of type [**Identifier1B**](#Identifier1B) OPTIONAL<br>
optionally identifies the lane in the road segment or intersection topology on which the position is located.
* _connectionId_ of type [**Identifier1B**](#Identifier1B) OPTIONAL<br>
optionally identifies the connection inside the conflict area of an intersection, i.e. it identifies a trajectory for travelling through the
conflict area of an intersection which connects e.g an ingress with an egress lane.
* _longitudinalLanePosition_ of type [**LongitudinalLanePosition**](#LongitudinalLanePosition) OPTIONAL<br>
optionally indicates the longitudinal offset of the map-matched position of the object along the lane or connection measured from the start of the lane/connection, along the lane.
**Categories:** Road topology information
**Revision:** _Created in V2.1.1, definition of longitudinalLanePosition amended in V2.2.1_
```asn1
MapPosition ::= SEQUENCE {
mapReference MapReference OPTIONAL,
laneId Identifier1B OPTIONAL,
connectionId Identifier1B OPTIONAL,
longitudinalLanePosition LongitudinalLanePosition OPTIONAL,
...
}
((WITH COMPONENTS {..., laneId PRESENT, connectionId ABSENT }) |
(WITH COMPONENTS {..., laneId ABSENT, connectionId PRESENT }))
```
### <a name="MapReference"></a>MapReference
This DF provides the reference to the information contained in a MAPEM according to ETSI TS 103 301 [[15]](#references).
* _roadsegment_ of type [**RoadSegmentReferenceId**](#RoadSegmentReferenceId) <br>
option that identifies the description of a road segment contained in a MAPEM.
* _intersection_ of type [**IntersectionReferenceId**](#IntersectionReferenceId) <br>
option that identifies the description of an intersection contained in a MAPEM.
**Categories:** Road topology information
**Revision:** _Created in V2.1.1_
```asn1
MapReference::= CHOICE {
roadsegment RoadSegmentReferenceId,
intersection IntersectionReferenceId
}
```
### <a name="MapReferences"></a>MapReferences
This DF shall contain a list of [**MapReference**](#MapReference).
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
MapReferences::= SEQUENCE (SIZE(1..8,...)) OF MapReference
The specified message rate is: mantissa*(10<sup>exponent</sup>)
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
```asn1
MessageRateHz::= SEQUENCE {
mantissa INTEGER (1..100),
exponent INTEGER (-5..2)
### <a name="MessageSegmentationInfo"></a>MessageSegmentationInfo
This DF provides information about a message with respect to the segmentation process on facility layer at the sender.
* _totalMsgNo_ of type [**CardinalNumber3b**](#CardinalNumber3b) <br>
indicates the total number of messages that have been assembled on the transmitter side to encode the information
during the same messsage generation process.
* _thisMsgNo_ of type [**OrdinalNumber3b**](#OrdinalNumber3b) <br>
indicates the position of the message within of the total set of messages generated during the same message generation process.
**Categories:** Communication information
**Revision:** _Created in V2.1.1, description revised in V2.2.1_
totalMsgNo CardinalNumber3b,
thisMsgNo OrdinalNumber3b
### <a name="MetaInformation"></a>MetaInformation
This DF provides information about the source of and confidence in information.
It shall include the following components:
* _usedDetectionInformation_ of type [**SensorTypes**](#SensorTypes) <br>
the type of sensor(s) that is used to provide the detection information.
* _usedStoredInformation_ of type [**StoredInformationType**](#StoredInformationType) <br>
* _confidenceValue_ of type [**ConfidenceLevel**](#ConfidenceLevel) OPTIONAL<br>
an optional confidence value associated to the information.
**Categories:** Basic information
**Revision:** _Created in V2.2.1_
```asn1
MetaInformation::=SEQUENCE{
usedDetectionInformation SensorTypes,
usedStoredInformation StoredInformationType,
confidenceValue ConfidenceLevel OPTIONAL,
...
}
```
### <a name="MitigationForTechnologies"></a>MitigationForTechnologies
This DF shall contain a list of [**MitigationPerTechnologyClass**](#MitigationPerTechnologyClass).
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
```asn1
MitigationForTechnologies ::= SEQUENCE (SIZE(1..8)) OF MitigationPerTechnologyClass
```
### <a name="MitigationPerTechnologyClass"></a>MitigationPerTechnologyClass
This DF represents a set of mitigation parameters for a specific technology, as specified in ETSI TS 103 724 [[24]](#references), clause 7.
* _accessTechnologyClass_ of type [**AccessTechnologyClass**](#AccessTechnologyClass) <br>
channel access technology to which this mitigation is intended to be applied.
* _lowDutyCycle_ of type **INTEGER** (0 .. 10000) OPTIONAL<br>
* _powerReduction_ of type **INTEGER** (0 .. 30) OPTIONAL<br>
* _dmcToffLimit_ of type **INTEGER** (0 .. 1200) OPTIONAL<br>
idle time limit as defined in ETSI TS 103 175 [[19]](#references).
* _dmcTonLimit_ of type **INTEGER** (0 .. 20) OPTIONAL<br>
Transmission duration limit, as defined in ETSI EN 302 571 [[20]](#references).
**Categories:** Communication information
**Revision:** _Created in V2.1.1_
NOTE: All parameters are optional, as they may not apply to some of the technologies or
interference management zone types. Specification details are in ETSI TS 103 724 [[24]](#references), clause 7.
```asn1
MitigationPerTechnologyClass ::= SEQUENCE {
accessTechnologyClass AccessTechnologyClass,
lowDutyCycle INTEGER (0 .. 10000) OPTIONAL,
powerReduction INTEGER (0 .. 30) OPTIONAL,
dmcToffLimit INTEGER (0 .. 1200) OPTIONAL,
dmcTonLimit INTEGER (0 .. 20) OPTIONAL,
...
}
```
### <a name="ObjectClass"></a>ObjectClass
This DF indicates both the class and associated subclass that best describes an object.
* _vehicleSubClass_ of type [**TrafficParticipantType**](#TrafficParticipantType) (unknown|passengerCar..tram|agricultural)<br>
the object is a road vehicle and the specific subclass is specified.
* _vruSubClass_ of type [**VruProfileAndSubprofile**](#VruProfileAndSubprofile) <br>
the object is a VRU and the specific subclass is specified.
* _groupSubClass_ of type [**VruClusterInformation**](#VruClusterInformation) <br>
the object is a VRU group or cluster and the cluster information is specified.
* _otherSubClass_ of type [**OtherSubClass**](#OtherSubClass) <br>
the object is of a different type than the above and the specific subclass is specified.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
vehicleSubClass TrafficParticipantType (unknown|passengerCar..tram|agricultural),
vruSubClass VruProfileAndSubprofile,
groupSubClass VruClusterInformation
(WITH COMPONENTS{..., clusterBoundingBoxShape ABSENT}),
...
}
```
### <a name="ObjectClassDescription"></a>ObjectClassDescription
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
ObjectClassDescription ::= SEQUENCE (SIZE(1..8)) OF ObjectClassWithConfidence
```
### <a name="ObjectClassWithConfidence"></a>ObjectClassWithConfidence
This DF represents the classification of a detected object together with a confidence level.
* _objectClass_ of type [**ObjectClass**](#ObjectClass) <br>
* _confidence_ of type [**ConfidenceLevel**](#ConfidenceLevel) <br>
* Confidence<br>
the associated confidence level.
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
```asn1
ObjectClassWithConfidence ::= SEQUENCE {
objectClass ObjectClass,
confidence ConfidenceLevel
}
```
### <a name="ObjectDimension"></a>ObjectDimension
This DF represents a dimension of an object together with a confidence value.
* _value_ of type [**ObjectDimensionValue**](#ObjectDimensionValue) <br>
the object dimension value which can be estimated as the mean of the current distribution.
* _confidence_ of type [**ObjectDimensionConfidence**](#ObjectDimensionConfidence) <br>
**Categories:** Sensing information
**Revision:** _Created in V2.1.1_
ObjectDimension ::= SEQUENCE {
value ObjectDimensionValue,
### <a name="OccupiedLanesWithConfidence"></a>OccupiedLanesWithConfidence
This DF represents a set of lanes which are partially or fully occupied by an object or event at an externally defined reference position.
8207
8208
8209
8210
8211
8212
8213
8214
8215
8216
8217
8218
8219
8220
8221
8222
8223
8224
8225
8226
8227
8228
8229
8230
8231
8232
8233
8234
8235
8236
8237
8238
8239
8240
8241
8242
8243
8244
8245
8246
It shall include the following components:
* _lanePositionBased_ of type **SEQUENCE** (SIZE(1..4)) OF LanePositionOptions<br>
a set of up to `4` lanes that are partially or fully occupied by an object or event, ordered by increasing value of [**LanePosition**](#LanePosition).
Lanes that are partially occupied can be described using the component lanePositionWithLateralDetails of [**Options**](#Options), with the following constraints:
The distance to lane borders which are covered by the object / event shall be set to 0. Only the distances to the leftmost and/or rightmost border which are not covered by
the object / event shall be provided with values > 0. Those values shall be added to the respective instances of [**LanePositionOptions**](#LanePositionOptions), i.e. the first entry shall contain the component distanceToLeftBorder > 0 ,
and/or the last entry shall contain the component distanceToRightBorder > 0; the respective other components of these entries shall be set to 0.
* _mapBased_ of type **SEQUENCE** (SIZE(1..4)) OF MapPosition OPTIONAL<br>
optional lane information described in the context of a MAPEM as specified in ETSI TS 103 301 [[15]](#references).
If present, it shall describe the same lane(s) as listed in the component lanePositionBased, but using the lane identification of the MAPEM. This component can be used only if a
MAPEM is available for the reference position (e.g. on an intersection): In this case it is used as a synonym to the mandatory component lanePositionBased.
* _confidence_ of type [**MetaInformation**](#MetaInformation) <br>
mandatory confidence information for expressing the probability that all the provided lanes are occupied. It also provides information on how the lane
information were generated. If none of the sensors were used, the lane information is assumed to be derived directly from the absolute reference position and the related dimension.
**Categories:** Road Topology information
**Revision:** _Created in V2.2.1_
>>>
NOTE: In contrast to [**GeneralizedLanePosition**](#GeneralizedLanePosition), the dimension of the object or event area (width and length) is taken into account to determine the occupancy,
i.e. this DF describes the lanes which are blocked by an object or event and not the position of the object / event itself. A confidence is used to describe the
probability that exactly all the provided lanes are occupied.
>>>
```asn1
OccupiedLanesWithConfidence::= SEQUENCE {
lanePositionBased SEQUENCE (SIZE(1..4)) OF LanePositionOptions,
mapBased SEQUENCE (SIZE(1..4)) OF MapPosition OPTIONAL,
confidence MetaInformation,
...
}
```
This DF represents a path with a set of path points.
It shall contain up to `40` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories:** GeoReference information Vehicle information
**Revision:** _created in V2.1.1 based on PathHistory_
```asn1
Path::= SEQUENCE (SIZE(0..40)) OF PathPoint
```
### <a name="PathDeltaTimeChoice"></a>PathDeltaTimeChoice
This DF represents estimated/predicted travel time between a position and a predefined reference position.
the following options are available:
* _deltaTimeHighPrecision_ of type [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) <br>
delta time with precision of 0,1 s.
* _deltaTimeBigRange_ of type [**DeltaTimeTenSeconds**](#DeltaTimeTenSeconds) <br>
delta time with precision of 10 s.
**Categories:** Basic information
**Revision:** _Created in V2.2.1_
```asn1
PathDeltaTimeChoice::= CHOICE {
deltaTimeHighPrecision DeltaTimeTenthOfSecond,
8281
8282
8283
8284
8285
8286
8287
8288
8289
8290
8291
8292
8293
8294
8295
8296
8297
8298
8299
8300
8301
8302
8303
8304
8305
8306
}
```
### <a name="PathExtended"></a>PathExtended
This DF represents a path towards a specific point specified in the [**EventZone**](#EventZone).
It shall include the following components:
* _pointOfEventZone_ of type **INTEGER** (1..23)<br>
the ordinal number of the point within the DF EventZone, i.e. within the list of EventPoints.
* _path_ of type [**Path**](#Path) <br>
the associated path towards the point specified in pointOfEventZone.
The first PathPoint presents an offset delta position with regards to the position of that pointOfEventZone.
**Categories:** GeoReference information
**Revision:** _Created in V2.2.1_
```asn1
PathExtended::= SEQUENCE {
pointOfEventZone INTEGER(1..23),
path Path
}
```
This DF represents a path history with a set of path points.
It shall contain up to `40` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories:** GeoReference information Vehicle information
**Revision:** _semantics updated in V2.1.1, size corrected to 0..40 in V2.2.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Path**](#Path) instead.
PathHistory::= SEQUENCE (SIZE(0..40)) OF PathPoint
This DF represents a predicted path or trajectory with a set of predicted points and optional information to generate a shape which is estimated to contain the real path.
It shall contain up to `16` [**PathPointPredicted**](#PathPointPredicted).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1 , size constraint changed to SIZE(1..16, ...) in V2.2.1_
```asn1
PathPredicted::= SEQUENCE (SIZE(1..16,...)) OF PathPointPredicted
```
### <a name="PathPredicted2"></a>PathPredicted2
This DF represents a predicted path, predicted trajectory or predicted path zone together with usage information and a prediction confidence.
It shall include the following components:
* _pathPredicted_ of type [**PathPredicted**](#PathPredicted) <br>
the predicted path (pathDeltaTime ABSENT) or trajectory (pathDeltaTime PRESENT) and/or the path zone (symmetricAreaOffset PRESENT).
* _usageIndication_ of type [**UsageIndication**](#UsageIndication) <br>
an indication of how the predicted path will be used.
* _confidenceLevel_ of type [**ConfidenceLevel**](#ConfidenceLevel) <br>
the confidence that the path/trajectory in pathPredicted will occur as predicted.
**Categories:** GeoReference information
**Revision:** _created in V2.2.1_
pathPredicted PathPredicted
((WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime ABSENT, symmetricAreaOffset ABSENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime PRESENT, symmetricAreaOffset ABSENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime ABSENT, symmetricAreaOffset PRESENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., pathDeltaTime PRESENT, symmetricAreaOffset PRESENT}))),
usageIndication UsageIndication,
confidenceLevel ConfidenceLevel,
...
}
```
### <a name="PathPredictedList"></a>PathPredictedList
This DF represents one or more predicted paths, or trajectories or path zones (zones that include all possible paths/trajectories within its boundaries) using [**PathPredicted2**](#PathPredicted2).
It shall contain up to `16` [**PathPredicted2**](#PathPredicted2).
**Categories:** GeoReference information
**Revision:** _V2.2.1_
```asn1
PathPredictedList ::= SEQUENCE SIZE(1..16,...) OF PathPredicted2
This DF defines an offset waypoint position within a path.
* _pathPosition_ of type [**DeltaReferencePosition**](#DeltaReferencePosition) <br>
The waypoint position defined as an offset position with regards to a pre-defined reference position.
* _pathDeltaTime_ of type [**PathDeltaTime**](#PathDeltaTime) OPTIONAL<br>
The optional travel time separated from a waypoint to the predefined reference position.
**Categories:** GeoReference information
**Revision:** _semantics updated in V2.1.1_
```asn1
PathPoint ::= SEQUENCE {
pathPosition DeltaReferencePosition,
pathDeltaTime PathDeltaTime OPTIONAL
}
```
### <a name="PathPointPredicted"></a>PathPointPredicted
This DF defines a predicted offset position that can be used within a predicted path or trajectory, together with optional data to describe a path zone shape.
* _deltaLatitude_ of type [**DeltaLatitude**](#DeltaLatitude) <br>
the offset latitude with regards to a pre-defined reference position.
* _deltaLongitude_ of type [**DeltaLongitude**](#DeltaLongitude) <br>
the offset longitude with regards to a pre-defined reference position.
* _horizontalPositionConfidence_ of type [**PosConfidenceEllipse**](#PosConfidenceEllipse) OPTIONAL<br>
the optional confidence value associated to the horizontal geographical position.
* _deltaAltitude_ of type [**DeltaAltitude**](#DeltaAltitude) DEFAULT unavailable<br>
the optional offset altitude with regards to a pre-defined reference position, with default value unavailable.
* _altitudeConfidence_ of type [**AltitudeConfidence**](#AltitudeConfidence) DEFAULT unavailable<br>
the optional confidence value associated to the altitude value of the geographical position, with default value unavailable.
* _pathDeltaTime_ of type [**PathDeltaTimeChoice**](#PathDeltaTimeChoice) OPTIONAL<br>
the optional travel time to the waypoint from the predefined reference position.
* _symmetricAreaOffset_ of type [**StandardLength9b**](#StandardLength9b) OPTIONAL<br>
the optional symmetric offset to generate a shape, see Annex D for details.
* _asymmetricAreaOffset_ of type [**StandardLength9b**](#StandardLength9b) OPTIONAL<br>
the optional asymmetric offset to generate a shape, see Annex D for details.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1, type of pathDeltaTime changed and optionality added, fields symmetricAreaOffset and asymmetricAreaOffset added in V2.2.1_
PathPointPredicted::= SEQUENCE {
deltaLatitude DeltaLatitude,
deltaLongitude DeltaLongitude,
horizontalPositionConfidence PosConfidenceEllipse OPTIONAL,
deltaAltitude DeltaAltitude DEFAULT unavailable,
altitudeConfidence AltitudeConfidence DEFAULT unavailable,
symmetricAreaOffset StandardLength9b OPTIONAL,
asymmetricAreaOffset StandardLength9b OPTIONAL,
((WITH COMPONENTS {..., symmetricAreaOffset ABSENT, asymmetricAreaOffset ABSENT}) |
(WITH COMPONENTS {..., symmetricAreaOffset PRESENT, asymmetricAreaOffset ABSENT}) |
(WITH COMPONENTS {..., symmetricAreaOffset PRESENT, asymmetricAreaOffset PRESENT}))
```
### <a name="PathReferences"></a>PathReferences
This DF represents a list of references to the components of a [**Traces**](#Traces) or [**TracesExtended**](#TracesExtended) DF using the [**PathId**](#PathId).
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
PathReferences ::= SEQUENCE (SIZE(1..14)) OF PathId
```
### <a name="PerceivedObject"></a>PerceivedObject
This DF contains information about a perceived object including its kinematic state and attitude vector in a pre-defined coordinate system and with respect to a reference time.
* _objectId_ of type [**Identifier2B**](#Identifier2B) OPTIONAL<br>
optional identifier assigned to a detected object.
* _measurementDeltaTime_ of type [**DeltaTimeMilliSecondSigned**](#DeltaTimeMilliSecondSigned) <br>
the time difference from a reference time to the time of the measurement of the object.
Negative values indicate that the provided object state refers to a point in time before the reference time.
* _position_ of type [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) <br>
the position of the geometric centre of the object's bounding box within the pre-defined coordinate system.
* _velocity_ of type [**Velocity3dWithConfidence**](#Velocity3dWithConfidence) OPTIONAL<br>
the velocity vector of the object within the pre-defined coordinate system.
* _acceleration_ of type [**Acceleration3dWithConfidence**](#Acceleration3dWithConfidence) OPTIONAL<br>
the acceleration vector of the object within the pre-defined coordinate system.
* _angles_ of type [**EulerAnglesWithConfidence**](#EulerAnglesWithConfidence) OPTIONAL<br>
optional Euler angles of the object bounding box at the time of measurement.
* _zAngularVelocity_ of type [**CartesianAngularVelocityComponent**](#CartesianAngularVelocityComponent) OPTIONAL<br>
optional angular velocity of the object around the z-axis at the time of measurement.
The angular velocity is measured with positive values considering the object orientation turning around the z-axis using the right-hand rule.
* _lowerTriangularCorrelationMatrices_ of type [**LowerTriangularPositiveSemidefiniteMatrices**](#LowerTriangularPositiveSemidefiniteMatrices) OPTIONAL<br>
optional set of lower triangular correlation matrices for selected components of the provided kinematic state and attitude vector.
* _objectDimensionZ_ of type [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional z-dimension of object bounding box.
This dimension shall be measured along the direction of the z-axis after all the rotations have been applied.
* _objectDimensionY_ of type [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional y-dimension of the object bounding box.
This dimension shall be measured along the direction of the y-axis after all the rotations have been applied.
* _objectDimensionX_ of type [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional x-dimension of object bounding box.
This dimension shall be measured along the direction of the x-axis after all the rotations have been applied.
* _objectAge_ of type [**DeltaTimeMilliSecondSigned**](#DeltaTimeMilliSecondSigned) (0..2047) OPTIONAL<br>
optional age of the detected and described object, i.e. the difference in time between the moment
it has been first detected and the reference time of the message. Value `1500` indicates that the object has been observed for more than 1.5s.
* _objectPerceptionQuality_ of type [**ObjectPerceptionQuality**](#ObjectPerceptionQuality) OPTIONAL<br>
* _sensorIdList_ of type [**SequenceOfIdentifier1B**](#SequenceOfIdentifier1B) OPTIONAL<br>
optional list of sensor-IDs which provided the measurement data.
* _classification_ of type [**ObjectClassDescription**](#ObjectClassDescription) OPTIONAL<br>
optional classification of the described object
* _mapPosition_ of type [**MapPosition**](#MapPosition) OPTIONAL<br>
* matchedPosition<br>
optional map-matched position of an object.
**Categories:** Sensing information
**Revision:** _created in V2.1.1_
position CartesianPosition3dWithConfidence,
velocity Velocity3dWithConfidence OPTIONAL,
acceleration Acceleration3dWithConfidence OPTIONAL,
angles EulerAnglesWithConfidence OPTIONAL,
zAngularVelocity CartesianAngularVelocityComponent OPTIONAL,
lowerTriangularCorrelationMatrices LowerTriangularPositiveSemidefiniteMatrices OPTIONAL,
objectDimensionZ ObjectDimension OPTIONAL,
objectDimensionY ObjectDimension OPTIONAL,
objectDimensionX ObjectDimension OPTIONAL,
objectAge DeltaTimeMilliSecondSigned (0..2047) OPTIONAL,
objectPerceptionQuality ObjectPerceptionQuality OPTIONAL,
sensorIdList SequenceOfIdentifier1B OPTIONAL,
classification ObjectClassDescription OPTIONAL,
mapPosition MapPosition OPTIONAL,
...
}
```
### <a name="PolygonalShape"></a>PolygonalShape
This DF represents the shape of a polygonal area or of a right prism.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
the optional reference point used for the definition of the shape, relative to an externally specified reference position.
If this component is absent, the externally specified reference position represents the shape's reference point.
* _polygon_ of type [**SequenceOfCartesianPosition3d**](#SequenceOfCartesianPosition3d) (SIZE(3..16,...))<br>
the polygonal area represented by a list of minimum `3` to maximum `16` [**CartesianPosition3d**](#CartesianPosition3d).
All nodes of the polygon shall be considered relative to the shape's reference point.
* _height_ of type [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
the optional height, present if the shape is a right prism extending in the positive z-axis.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1_
shapeReferencePoint CartesianPosition3d OPTIONAL,
polygon SequenceOfCartesianPosition3d (SIZE(3..16,...)),
height StandardLength12b OPTIONAL
}
```
### <a name="PosConfidenceEllipse"></a>PosConfidenceEllipse
This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a
confidence level of 95 %. The centre of the ellipse shape corresponds to the reference
position point for which the position accuracy is evaluated.
* _semiMajorConfidence_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the major axis, i.e. distance between the centre point
and major axis point of the position accuracy ellipse.
* _semiMinorConfidence_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the minor axis, i.e. distance between the centre point
and minor axis point of the position accuracy ellipse.
* _semiMajorOrientation_ of type [**HeadingValue**](#HeadingValue) <br>
orientation direction of the ellipse major axis of the position accuracy
ellipse with regards to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
**Categories:** GeoReference information
```asn1
PosConfidenceEllipse ::= SEQUENCE {
semiMajorConfidence SemiAxisLength,
semiMinorConfidence SemiAxisLength,
semiMajorOrientation HeadingValue
}
```
### <a name="PositionConfidenceEllipse"></a>PositionConfidenceEllipse
This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a
confidence level of 95 %. The centre of the ellipse shape corresponds to the reference
position point for which the position accuracy is evaluated.
It shall include the following components:
* _semiMajorAxisLength_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the major axis, i.e. distance between the centre point
and major axis point of the position accuracy ellipse.
* _semiMinorAxisLength_ of type [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the minor axis, i.e. distance between the centre point
and minor axis point of the position accuracy ellipse.
* _semiMajorAxisOrientation_ of type [**Wgs84AngleValue**](#Wgs84AngleValue) <br>
orientation direction of the ellipse major axis of the position accuracy
ellipse with regards to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1 based on [**PosConfidenceEllipse**](#PosConfidenceEllipse)_
```asn1
PositionConfidenceEllipse ::= SEQUENCE {
semiMajorAxisLength SemiAxisLength,
semiMinorAxisLength SemiAxisLength,
semiMajorAxisOrientation Wgs84AngleValue
}
```
### <a name="PositionOfPillars"></a>PositionOfPillars
This DF shall contain a list of distances [**PosPillar**](#PosPillar) that refer to the perpendicular distance between centre of vehicle front bumper
and vehicle pillar A, between neighbour pillars until the last pillar of the vehicle.
Vehicle pillars refer to the vertical or near vertical support of vehicle,
designated respectively as the A, B, C or D and other pillars moving in side profile view from the front to rear.
The first value of the DF refers to the perpendicular distance from the centre of vehicle front bumper to
vehicle A pillar. The second value refers to the perpendicular distance from the centre position of A pillar
to the B pillar of vehicle and so on until the last pillar.
**Categories:** Vehicle information
```asn1
PositionOfPillars ::= SEQUENCE (SIZE(1..3, ...)) OF PosPillar
```
### <a name="ProtectedCommunicationZone"></a>ProtectedCommunicationZone
This DF describes a zone of protection inside which the ITS communication should be restricted.
* _protectedZoneType_ of type [**ProtectedZoneType**](#ProtectedZoneType) <br>
* _expiryTime_ of type [**TimestampIts**](#TimestampIts) OPTIONAL<br>
optional time at which the validity of the protected communication zone will expire.
* _protectedZoneLatitude_ of type [**Latitude**](#Latitude) <br>
latitude of the centre point of the protected communication zone.
* _protectedZoneLongitude_ of type [**Longitude**](#Longitude) <br>
longitude of the centre point of the protected communication zone.
* _protectedZoneRadius_ of type [**ProtectedZoneRadius**](#ProtectedZoneRadius) OPTIONAL<br>
optional radius of the protected communication zone in metres.
* _protectedZoneId_ of type [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL<br>
the optional ID of the protected communication zone.
**Categories:** Infrastructure information Communication information
**Revision:** _revised in V2.1.1 (changed protectedZoneID to protectedZoneId)_
NOTE: A protected communication zone may be defined around a CEN DSRC road side equipment.
```asn1
ProtectedCommunicationZone ::= SEQUENCE {
protectedZoneType ProtectedZoneType,
expiryTime TimestampIts OPTIONAL,
protectedZoneLatitude Latitude,
protectedZoneLongitude Longitude,
protectedZoneRadius ProtectedZoneRadius OPTIONAL,
...
}
```
### <a name="ProtectedCommunicationZonesRSU"></a>ProtectedCommunicationZonesRSU
This DF shall contain a list of [**ProtectedCommunicationZone**](#ProtectedCommunicationZone) provided by a road side ITS-S (Road Side Unit RSU).
It may provide up to 16 protected communication zones information.
**Categories:** Infrastructure information Communication information
```asn1
ProtectedCommunicationZonesRSU ::= SEQUENCE (SIZE(1..16)) OF ProtectedCommunicationZone
```
8716
8717
8718
8719
8720
8721
8722
8723
8724
8725
8726
8727
8728
8729
8730
8731
8732
8733
8734
8735
8736
8737
8738
8739
8740
8741
8742
### <a name="Provider"></a>Provider
This DF identifies an organization.
It shall include the following components:
* _countryCode_ of type [**CountryCode**](#CountryCode) <br>
represents the country code that identifies the country of the national registration administrator for issuers according to ISO 14816.
* _providerIdentifier_ of type [**IssuerIdentifier**](#IssuerIdentifier) <br>
identifies the organization according to the national ISO 14816 register for issuers.
**Categories:** Communication information
**Revision:** _Created in V2.2.1 based on ISO 17573-3 [[24]](#references)_
>>>
NOTE: See https://www.itsstandards.eu/registries/register-of-nra-i-cs1/ for a list of national registration administrators and their respective registers
>>>
```asn1
Provider ::= SEQUENCE {
countryCode CountryCode,
providerIdentifier IssuerIdentifier
}
```
This DF represents activation data for real-time systems designed for operations control, traffic light priorities, track switches, barriers, etc.
using a range of activation devices equipped in public transport vehicles.
The activation of the corresponding equipment is triggered by the approach or passage of a public transport
vehicle at a certain point (e.g. a beacon).
* _ptActivationType_ of type [**PtActivationType**](#PtActivationType) <br>
* _ptActivationData_ of type [**PtActivationData**](#PtActivationData) <br>
* ptActicationData<br>
data of activation.
Today there are different payload variants defined for public transport activation-data. The R09.x is one of
the industry standard used by public transport vehicles (e.g. buses, trams) in Europe (e.g. Germany Austria)
for controlling traffic lights, barriers, bollards, etc. This DF shall include information like route, course,
The R09.x content is defined in VDV recommendation 420 [[7]](#references). It includes following information:
- Priority Request Information (pre-request, request, ready to start)
- End of Prioritization procedure
- Priority request direction
- Public Transport line number
- Priority of public transport
- Route line identifier of the public transport
- Route number identification
- Destination of public transport vehicle
Other countries may use different message sets defined by the local administration.
**Categories:** Vehicle information
```asn1
PtActivation ::= SEQUENCE {
ptActivationType PtActivationType,
ptActivationData PtActivationData
}
```
### <a name="RadialShape"></a>RadialShape
This DF describes a radial shape. The circular or spherical sector is constructed by sweeping
the provided range about the reference position specified outside of the context of this DF or
about the optional shapeReferencePoint. The range is swept between a horizontal start and a
horizontal end angle in the X-Y plane of a cartesian coordinate system specified outside of the
context of this DF, in a right-hand positive angular direction w.r.t. the x-axis.
A vertical opening angle in the X-Z plane may optionally be provided in a right-hand positive
angular direction w.r.t. the x-axis.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
the optional reference point used for the definition of the shape,
relative to an externally specified reference position. If this component is absent, the
externally specified reference position represents the shape's reference point.
* _range_ of type [**StandardLength12b**](#StandardLength12b) <br>
the radial range of the shape from the shape's reference point.
* _horizontalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
the start of the shape's horizontal opening angle.
* _horizontalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
the end of the shape's horizontal opening angle.
* _verticalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional start of the shape's vertical opening angle.
* _verticalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional end of the shape's vertical opening angle.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1, names and types of the horizontal opening angles changed, constraint added and description revised in V2.2.1_
horizontalOpeningAngleStart CartesianAngleValue,
horizontalOpeningAngleEnd CartesianAngleValue,
verticalOpeningAngleStart CartesianAngleValue OPTIONAL,
verticalOpeningAngleEnd CartesianAngleValue OPTIONAL
((WITH COMPONENTS {..., verticalOpeningAngleStart ABSENT, verticalOpeningAngleEnd ABSENT }) |
(WITH COMPONENTS {..., verticalOpeningAngleStart PRESENT, verticalOpeningAngleEnd PRESENT }))
```
### <a name="RadialShapes"></a>RadialShapes
This DF describes a list of radial shapes positioned w.r.t. to an offset position defined
relative to a reference position specified outside of the context of this DF and oriented w.r.t.
a cartesian coordinate system specified outside of the context of this DF.
* _refPointId_ of type [**Identifier1B**](#Identifier1B) <br>
the identification of the reference point in case of a sensor mounted to trailer. Defaults to ITS ReferencePoint (0).
* _xCoordinate_ of type [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) <br>
* _yCoordinate_ of type [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) <br>
* _zCoordinate_ of type [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) OPTIONAL<br>
* _radialShapesList_ of type [**RadialShapesList**](#RadialShapesList) <br>
**Categories:** Georeference information
**Revision:** _created in V2.1.1, description revised in V2.2.1_
```asn1
RadialShapes ::= SEQUENCE {
refPointId Identifier1B,
xCoordinate CartesianCoordinateSmall,
yCoordinate CartesianCoordinateSmall,
zCoordinate CartesianCoordinateSmall OPTIONAL,
}
```
### <a name="RadialShapesList"></a>RadialShapesList
The DF contains a list of [**RadialShapeDetails**](#RadialShapeDetails).
**Categories:** Georeference information
**Revision:** _created in V2.1.1_
```asn1
RadialShapesList ::= SEQUENCE SIZE(1..16,...) OF RadialShapeDetails
```
### <a name="RadialShapeDetails"></a>RadialShapeDetails
This DF describes radial shape details. The circular sector or cone is
constructed by sweeping the provided range about the position specified outside of the
context of this DF. The range is swept between a horizontal start and a horizontal end angle in
the X-Y plane of a right-hand cartesian coordinate system specified outside of the context of
this DF, in positive angular direction w.r.t. the x-axis. A vertical opening angle in the X-Z
plane may optionally be provided in positive angular direction w.r.t. the x-axis.
* _range_ of type [**StandardLength12b**](#StandardLength12b) <br>
the radial range of the sensor from the reference point or sensor point offset.
* _horizontalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
the start of the shape's horizontal opening angle.
* _horizontalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) <br>
* _verticalOpeningAngleStart_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional start of the shape's vertical opening angle.
* _verticalOpeningAngleEnd_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional end of the shape's vertical opening angle.
**Categories:** Georeference information
**Revision:** _created in V2.1.1, description revised and constraint added in V2.2.1_
```asn1
RadialShapeDetails ::= SEQUENCE {
range StandardLength12b,
horizontalOpeningAngleStart CartesianAngleValue,
horizontalOpeningAngleEnd CartesianAngleValue,
verticalOpeningAngleStart CartesianAngleValue OPTIONAL,
verticalOpeningAngleEnd CartesianAngleValue OPTIONAL
((WITH COMPONENTS {..., verticalOpeningAngleStart ABSENT, verticalOpeningAngleEnd ABSENT }) |
(WITH COMPONENTS {..., verticalOpeningAngleStart PRESENT, verticalOpeningAngleEnd PRESENT }))
```
### <a name="RectangularShape"></a>RectangularShape
This DF represents the shape of a rectangular area or a right rectangular prism that is centred
on a reference position defined outside of the context of this DF and oriented w.r.t. a cartesian
coordinate system defined outside of the context of this DF.
* _shapeReferencePoint_ of type [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
represents an optional offset point which the rectangle is centred on with
respect to the reference position. If this component is absent, the externally specified
reference position represents the shape's reference point.
* _semiLength_ of type [**StandardLength12b**](#StandardLength12b) <br>
represents half the length of the rectangle located in the X-Y Plane.
* _semiBreadth_ of type [**StandardLength12b**](#StandardLength12b) <br>
represents half the breadth of the rectangle located in the X-Y Plane.
* _orientation_ of type [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
represents the optional orientation of the length of the rectangle,
measured with positive values turning around the Z-axis using the right-hand rule, starting from
the X-axis.
* _height_ of type [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
represents the optional height, present if the shape is a right rectangular prism
with height extending in the positive Z-axis.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1, centerPoint renamed to shapeReferencePoint, the type of the field orientation changed and description revised in V2.2.1_
shapeReferencePoint CartesianPosition3d OPTIONAL,
semiLength StandardLength12b,
semiBreadth StandardLength12b,
orientation CartesianAngleValue OPTIONAL,
height StandardLength12b OPTIONAL
}
```
### <a name="ReferencePosition"></a>ReferencePosition
A position within a geographic coordinate system together with a confidence ellipse.
* _latitude_ of type [**Latitude**](#Latitude) <br>
* _longitude_ of type [**Longitude**](#Longitude) <br>
* _positionConfidenceEllipse_ of type [**PosConfidenceEllipse**](#PosConfidenceEllipse) <br>
the confidence ellipse associated to the geographical position.
* _altitude_ of type [**Altitude**](#Altitude) <br>
the altitude and an altitude accuracy of the geographical point.
**Categories:** GeoReference information
**Revision:** _description updated in V2.1.1_
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**ReferencePositionWithConfidence**](#ReferencePositionWithConfidence) instead.
```asn1
ReferencePosition ::= SEQUENCE {
latitude Latitude,
longitude Longitude,
positionConfidenceEllipse PosConfidenceEllipse,
altitude Altitude
}
```
### <a name="ReferencePositionWithConfidence"></a>ReferencePositionWithConfidence
A position within a geographic coordinate system together with a confidence ellipse.
It shall include the following components:
* _latitude_ of type [**Latitude**](#Latitude) <br>
* _longitude_ of type [**Longitude**](#Longitude) <br>
* _positionConfidenceEllipse_ of type [**PositionConfidenceEllipse**](#PositionConfidenceEllipse) <br>
the confidence ellipse associated to the geographical position.
* _altitude_ of type [**Altitude**](#Altitude) <br>
the altitude and an altitude accuracy of the geographical point.
**Categories:** GeoReference information
**Revision:** _created in V2.1.1 based on [**ReferencePosition**](#ReferencePosition) but using [**PositionConfidenceEllipse**](#PositionConfidenceEllipse)._
```asn1
ReferencePositionWithConfidence ::= SEQUENCE {
latitude Latitude,
longitude Longitude,
positionConfidenceEllipse PositionConfidenceEllipse,
altitude Altitude
}
```
This DF shall contain a list of [**StationType**](#StationType). to which a certain traffic restriction, e.g. the speed limit, applies.
**Categories:** Infrastructure information Traffic information
```asn1
RestrictedTypes ::= SEQUENCE (SIZE(1..3, ...)) OF StationType
```
### <a name="RoadConfigurationSection"></a>RoadConfigurationSection
This DF provides configuration information about a road section.
It shall include the following components:
* _roadSectionDefinition_ of type [**RoadSectionDefinition**](#RoadSectionDefinition) <br>
the topological definition of the road section for which the information in the other components applies throughout its entire length.
* _roadType_ of type [**RoadType**](#RoadType) OPTIONAL<br>
the optional type of road on which the section is located.
* _laneConfiguration_ of type [**BasicLaneConfiguration**](#BasicLaneConfiguration) OPTIONAL<br>
the optional configuration of the road section in terms of basic information per lane.
* _mapemConfiguration_ of type [**MapemConfiguration**](#MapemConfiguration) OPTIONAL<br>
the optional configuration of the road section in terms of MAPEM lanes or connections.
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
RoadConfigurationSection ::= SEQUENCE {
roadSectionDefinition RoadSectionDefinition,
roadType RoadType OPTIONAL,
laneConfiguration BasicLaneConfiguration OPTIONAL,
9061
9062
9063
9064
9065
9066
9067
9068
9069
9070
9071
9072
9073
9074
9075
9076
9077
9078
9079
9080
9081
9082
9083
9084
9085
9086
9087
9088
9089
9090
9091
9092
mapemConfiguration MapemConfiguration OPTIONAL,
...
}
((WITH COMPONENTS {..., laneConfiguration PRESENT}) |
(WITH COMPONENTS {..., mapemConfiguration PRESENT}))
```
### <a name="RoadConfigurationSectionList"></a>RoadConfigurationSectionList
This DF shall contain a list of [**RoadConfigurationSection**](#RoadConfigurationSection).
**Categories:** Road Topology information
**Revision:** _Created in V2.2.1_
```asn1
RoadConfigurationSectionList::= SEQUENCE (SIZE(1..8,...)) OF RoadConfigurationSection
```
### <a name="RoadSectionDefinition"></a>RoadSectionDefinition
This DF provides the basic topological definition of a road section.
It shall include the following components:
* _startingPointSection_ of type [**GeoPosition**](#GeoPosition) <br>
the position of the starting point of the section.
* _lengthOfSection_ of type [**StandardLength2B**](#StandardLength2B) OPTIONAL<br>
the optional length of the section along the road profile (i.e. including curves).
* _endingPointSection_ of type [**GeoPosition**](#GeoPosition) OPTIONAL<br>
the optional position of the ending point of the section.
If this component is absent, the ending position is implicitly defined by other means, e.g. the starting point of the next RoadConfigurationSection, or the sections length.
* _connectedPaths_ of type [**PathReferences**](#PathReferences) <br>
the identifier(s) of the path(s) having one or an ordered subset of waypoints located upstream of the RoadConfigurationSection starting point.
* _includedPaths_ of type [**PathReferences**](#PathReferences) <br>
the identifier(s) of the path(s) that covers (either with all its length or with a part of it) a RoadConfigurationSection.
* _isEventZoneIncluded_ of type **BOOLEAN** <br>
indicates, if set to TRUE, that the [**EventZone**](#EventZone) incl. its reference position covers a RoadConfigurationSection (either with all its length or with a part of it).
* _isEventZoneConnected_ of type **BOOLEAN** <br>
indicates, if set to TRUE, that the [**EventZone**](#EventZone) incl. its reference position has one or an ordered subset of waypoints located upstream of the RoadConfigurationSection starting point.
**Categories:** Road topology information
**Revision:** _Created in V2.2.1_
```asn1
RoadSectionDefinition::= SEQUENCE {
startingPointSection GeoPosition,
lengthOfSection StandardLength2B OPTIONAL,
endingPointSection GeoPosition OPTIONAL,
connectedPaths PathReferences,
includedPaths PathReferences,
isEventZoneIncluded BOOLEAN,
isEventZoneConnected BOOLEAN,
...
}
```
### <a name="RoadSegmentReferenceId"></a>RoadSegmentReferenceId
* _region_ of type [**Identifier2B**](#Identifier2B) OPTIONAL<br>
the optional identifier of the entity that is responsible for the region in which the road segment is placed.
It is the duty of that entity to guarantee that the [**Id**](#Id) is unique within the region.
* _id_ of type [**Identifier2B**](#Identifier2B) <br>
**Categories:** GeoReference information
**Revision:** _created in V2.1.1_
NOTE: when the component region is present, the RoadSegmentReferenceId is guaranteed to be globally unique.
```asn1
RoadSegmentReferenceId ::= SEQUENCE {
region Identifier2B OPTIONAL,
id Identifier2B
}
```
### <a name="SafeDistanceIndication"></a>SafeDistanceIndication
This DF provides the safe distance indication of a traffic participant with other traffic participant(s).
* _subjectStation_ of type [**StationId**](#StationId) OPTIONAL<br>
optionally indicates one "other" traffic participant identified by its ITS-S.
* _safeDistanceIndicator_ of type [**SafeDistanceIndicator**](#SafeDistanceIndicator) <br>
indicates whether the distance between the ego ITS-S and the traffic participant(s) is safe.
If subjectStation is present then it indicates whether the distance between the ego ITS-S and the traffic participant indicated in the component subjectStation is safe.
* _timeToCollision_ of type [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) OPTIONAL<br>
optionally indicated the time-to-collision calculated as sqrt(LaDi<sup>2</sup> + LoDi<sup>2</sup> + VDi<sup>2</sup>/relative speed
and represented in the nearest 100 ms. This component may be present only if subjectStation is present.
**Categories:** Traffic information Kinematic information
**Revision:** _created in V2.1.1_
NOTE: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD)
and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD).
>>>
```asn1
SafeDistanceIndication ::= SEQUENCE {
...
}
```
### <a name="SequenceOfCartesianPosition3d"></a>SequenceOfCartesianPosition3d
This DF shall contain a list of DF [**CartesianPosition3d**](#CartesianPosition3d).
**Categories:** GeoReference information
**Revision:** _created in V2.1.1_
```asn1
SequenceOfCartesianPosition3d ::= SEQUENCE (SIZE(1..16, ...)) OF CartesianPosition3d
```
### <a name="SequenceOfIdentifier1B"></a>SequenceOfIdentifier1B
The DF contains a list of DE [**Identifier1B**](#Identifier1B).
**Categories:** Basic information
**Revision:** _created in V2.1.1_
```asn1
SequenceOfIdentifier1B ::= SEQUENCE SIZE(1..128, ...) OF Identifier1B
```
### <a name="SequenceOfSafeDistanceIndication"></a>SequenceOfSafeDistanceIndication
The DF contains a list of DF [**SafeDistanceIndication**](#SafeDistanceIndication).
**Categories:** Traffic information Kinematic information
**Revision:** _created in V2.1.1_
SequenceOfSafeDistanceIndication ::= SEQUENCE(SIZE(1..8,...)) OF SafeDistanceIndication
```
### <a name="SequenceOfTrajectoryInterceptionIndication"></a>SequenceOfTrajectoryInterceptionIndication
The DF shall contain a list of DF [**TrajectoryInterceptionIndication**](#TrajectoryInterceptionIndication).
**Categories:** Traffic information Kinematic information
**Revision:** _created in V2.1.1_
SequenceOfTrajectoryInterceptionIndication ::= SEQUENCE (SIZE(1..8,...)) OF TrajectoryInterceptionIndication
This DF provides the definition of a geographical area or volume, based on different options.
* _rectangular_ of type [**RectangularShape**](#RectangularShape) <br>
definition of an rectangular area or a right rectangular prism (with a rectangular base) also called a cuboid, or informally a rectangular box.
* _circular_ of type [**CircularShape**](#CircularShape) <br>
definition of an area of circular shape or a right circular cylinder.
* _polygonal_ of type [**PolygonalShape**](#PolygonalShape) <br>
definition of an area of polygonal shape or a right prism.
* _elliptical_ of type [**EllipticalShape**](#EllipticalShape) <br>
definition of an area of elliptical shape or a right elliptical cylinder.
* _radial_ of type [**RadialShape**](#RadialShape) <br>
* _radialShapes_ of type [**RadialShapes**](#RadialShapes) <br>
* radialList<br>
definition of list of radial shapes.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
rectangular RectangularShape,
circular CircularShape,
polygonal PolygonalShape,
elliptical EllipticalShape,
radial RadialShape,
radialShapes RadialShapes,
...
}
```
### <a name="Speed"></a>Speed
This DF represents the speed and associated confidence value.
* _speedValue_ of type [**SpeedValue**](#SpeedValue) <br>
* _speedConfidence_ of type [**SpeedConfidence**](#SpeedConfidence) <br>
**Categories:** Kinematic information
```asn1
Speed ::= SEQUENCE {
speedValue SpeedValue,
speedConfidence SpeedConfidence
}
```
### <a name="StabilityChangeIndication"></a>StabilityChangeIndication
This DF provides the indication of change in stability.
* _lossProbability_ of type [**StabilityLossProbability**](#StabilityLossProbability) <br>
* _actionDeltaTime_ of type [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) <br>
the period over which the the probability of stability loss is estimated.
**Categories:** Kinematic information
```asn1
StabilityChangeIndication ::= SEQUENCE {
lossProbability StabilityLossProbability,
actionDeltaTime DeltaTimeTenthOfSecond,
...
}
```
### <a name="SteeringWheelAngle"></a>SteeringWheelAngle
This DF represents the steering wheel angle of the vehicle at certain point in time.
* _steeringWheelAngleValue_ of type [**SteeringWheelAngleValue**](#SteeringWheelAngleValue) <br>
* _steeringWheelAngleConfidence_ of type [**SteeringWheelAngleConfidence**](#SteeringWheelAngleConfidence) <br>
confidence value of the steering wheel angle value.
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
```asn1
SteeringWheelAngle ::= SEQUENCE {
steeringWheelAngleValue SteeringWheelAngleValue,
steeringWheelAngleConfidence SteeringWheelAngleConfidence
}
```
### <a name="Traces"></a>Traces
This DF represents one or more paths using [**Path**](#Path).
**Categories:** GeoReference information
**Revision:** _Description revised in V2.1.1. Is is now based on Path and not on PathHistory_
### <a name="TracesExtended"></a>TracesExtended
This DF represents one or more paths using [**PathExtended**](#PathExtended).
**Categories:** GeoReference information
**Revision:** _Created in V2.2.1_
TracesExtended ::= SEQUENCE SIZE(1..7) OF PathExtended
```
### <a name="TrafficIslandPosition"></a>TrafficIslandPosition
Ths DF represents the a position on a traffic island between two lanes.
* _oneSide_ of type [**LanePositionAndType**](#LanePositionAndType) <br>
* _otherSide_ of type [**LanePositionAndType**](#LanePositionAndType) <br>
**Categories:** Road Topology information
**Revision:** _Created in V2.1.1_
```asn1
TrafficIslandPosition ::= SEQUENCE {
oneSide LanePositionAndType,
otherSide LanePositionAndType,
...
}
```
### <a name="TrailerData"></a>TrailerData
This DF provides detailed information about an attached trailer.
* _refPointId_ of type [**Identifier1B**](#Identifier1B) <br>
identifier of the reference point of the trailer.
* _hitchPointOffset_ of type [**StandardLength1B**](#StandardLength1B) <br>
optional position of the hitch point in negative x-direction (according to ISO 8855) from the
vehicle Reference Point.
* _frontOverhang_ of type [**StandardLength1B**](#StandardLength1B) OPTIONAL<br>
optional length of the trailer overhang in the positive x direction (according to ISO 8855) from the
trailer Reference Point indicated by the refPointID. The value defaults to 0 in case the trailer
is not overhanging to the front with respect to the trailer reference point.
* _rearOverhang_ of type [**StandardLength1B**](#StandardLength1B) OPTIONAL<br>
optional length of the trailer overhang in the negative x direction (according to ISO 8855) from the
trailer Reference Point indicated by the refPointID.
* _trailerWidth_ of type [**VehicleWidth**](#VehicleWidth) OPTIONAL<br>
* _hitchAngle_ of type [**CartesianAngle**](#CartesianAngle) <br>
optional Value and confidence value of the angle between the trailer orientation (corresponding to the x
direction of the ISO 8855 [[21]](#references) coordinate system centered on the trailer) and the direction of
the segment having as end points the reference point of the trailer and the reference point of
the pulling vehicle, which can be another trailer or a vehicle looking on the horizontal plane
xy, described in the local Cartesian coordinate system of the trailer. The
angle is measured with negative values considering the trailer orientation turning clockwise
starting from the segment direction. The angle value accuracy is provided with the
confidence level of 95 %.
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
```asn1
TrailerData ::= SEQUENCE {
refPointId Identifier1B,
hitchPointOffset StandardLength1B,
frontOverhang StandardLength1B OPTIONAL,
rearOverhang StandardLength1B OPTIONAL,
trailerWidth VehicleWidth OPTIONAL,
...
}
```
### <a name="TrajectoryInterceptionIndication"></a>TrajectoryInterceptionIndication
This DF provides the trajectory interception indication of ego-VRU ITS-S with another ITS-Ss.
* _subjectStation_ of type [**StationId**](#StationId) OPTIONAL<br>
* _trajectoryInterceptionProbability_ of type [**TrajectoryInterceptionProbability**](#TrajectoryInterceptionProbability) <br>
indicates the propbability of the interception of the subject station trajectory
with the trajectory of the station indicated in the component subjectStation.
* _trajectoryInterceptionConfidence_ of type [**TrajectoryInterceptionConfidence**](#TrajectoryInterceptionConfidence) OPTIONAL<br>
indicates the confidence of interception of the subject station trajectory
with the trajectory of the station indicated in the component subjectStation.
**Categories:** Vehicle information
**Revision:** _Created in V2.1.1_
```asn1
TrajectoryInterceptionIndication ::= SEQUENCE {
subjectStation StationId OPTIONAL,
trajectoryInterceptionProbability TrajectoryInterceptionProbability,
trajectoryInterceptionConfidence TrajectoryInterceptionConfidence OPTIONAL,
```
### <a name="VarLengthNumber"></a>VarLengthNumber
This DF together with its sub DFs Ext1, Ext2 and the DE Ext3 provides the custom (i.e. not ASN.1 standard) definition of an integer with variable lenght, that can be used for example to encode the ITS-AID.
* **content** [0] INTEGER(0..127)<br>
* **extension** [1] Ext1<br>
**Categories:** Basic information
**Revision:** _Created in V2.1.1_
```asn1
VarLengthNumber::=CHOICE{
content [0] INTEGER(0..127),
extension [1] Ext1
}
Ext1::=CHOICE{
content [0] INTEGER(128..16511),
extension [1] Ext2
}
Ext2::=CHOICE{
content [0] INTEGER(16512..2113663),
extension [1] Ext3
}
Ext3::= INTEGER(2113664..270549119,...)
```
### <a name="VerticalAcceleration"></a>VerticalAcceleration
This DF indicates the vehicle acceleration at vertical direction and the associated confidence value.
* _verticalAccelerationValue_ of type [**VerticalAccelerationValue**](#VerticalAccelerationValue) <br>
vertical acceleration value at a point in time.
* _verticalAccelerationConfidence_ of type [**AccelerationConfidence**](#AccelerationConfidence) <br>
confidence value of the vertical acceleration value with a predefined confidence level.
**Categories:** Vehicle information
**Revision:** _Description revised in V2.1.1_
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**AccelerationComponent**](#AccelerationComponent) instead.
```asn1
VerticalAcceleration ::= SEQUENCE {
verticalAccelerationValue VerticalAccelerationValue,
verticalAccelerationConfidence AccelerationConfidence
}
```
### <a name="VehicleIdentification"></a>VehicleIdentification
This DF provides information related to the identification of a vehicle.
* _wMInumber_ of type [**WMInumber**](#WMInumber) OPTIONAL<br>
**Categories:** Vehicle information
```asn1
VehicleIdentification ::= SEQUENCE {
wMInumber WMInumber OPTIONAL,
vDS VDS OPTIONAL,
...
}
```
### <a name="VehicleLength"></a>VehicleLength
This DF represents the length of vehicle and accuracy indication information.
* _vehicleLengthValue_ of type [**VehicleLengthValue**](#VehicleLengthValue) <br>
* _vehicleLengthConfidenceIndication_ of type [**VehicleLengthConfidenceIndication**](#VehicleLengthConfidenceIndication) <br>
**Categories:** Vehicle information
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**VehicleLengthV2**](#VehicleLengthV2) instead.
```asn1
VehicleLength ::= SEQUENCE {
vehicleLengthValue VehicleLengthValue,
vehicleLengthConfidenceIndication VehicleLengthConfidenceIndication
}
```
This DF represents the length of vehicle and accuracy indication information.
It shall include the following components:
* _vehicleLengthValue_ of type [**VehicleLengthValue**](#VehicleLengthValue) <br>
* _trailerPresenceInformation_ of type [**TrailerPresenceInformation**](#TrailerPresenceInformation) <br>
**Categories:** Vehicle information
**Revision:** _created in V2.1.1 based on [**VehicleLength**](#VehicleLength) but using [**TrailerPresenceInformation**](#TrailerPresenceInformation)._
```asn1
VehicleLengthV2 ::= SEQUENCE {
vehicleLengthValue VehicleLengthValue,
trailerPresenceInformation TrailerPresenceInformation
}
```
### <a name="Velocity3dWithConfidence"></a>Velocity3dWithConfidence
This DF represents a velocity vector with associated confidence value.
* _polarVelocity_ of type [**VelocityPolarWithZ**](#VelocityPolarWithZ) <br>
the representation of the velocity vector in a polar or cylindrical coordinate system.
* _cartesianVelocity_ of type [**VelocityCartesian**](#VelocityCartesian) <br>
the representation of the velocity vector in a cartesian coordinate system.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
Velocity3dWithConfidence::= CHOICE{
polarVelocity VelocityPolarWithZ,
cartesianVelocity VelocityCartesian
}
```
### <a name="VelocityCartesian"></a>VelocityCartesian
This DF represents a velocity vector in a cartesian coordinate system.
* _xVelocity_ of type [**VelocityComponent**](#VelocityComponent) <br>
the x component of the velocity vector with the associated confidence value.
* _yVelocity_ of type [**VelocityComponent**](#VelocityComponent) <br>
the y component of the velocity vector with the associated confidence value.
* _zVelocity_ of type [**VelocityComponent**](#VelocityComponent) OPTIONAL<br>
the optional z component of the velocity vector with the associated confidence value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
VelocityCartesian::= SEQUENCE {
xVelocity VelocityComponent,
yVelocity VelocityComponent,
zVelocity VelocityComponent OPTIONAL
}
```
### <a name="VelocityComponent"></a>VelocityComponent
This DF represents a component of the velocity vector and the associated confidence value.
It shall include the following components:
* _value_ of type [**VelocityComponentValue**](#VelocityComponentValue) <br>
* _confidence_ of type [**SpeedConfidence**](#SpeedConfidence) <br>
**Categories:** Kinematic information
```asn1
VelocityComponent ::= SEQUENCE {
value VelocityComponentValue,
confidence SpeedConfidence
}
```
### <a name="VelocityPolarWithZ"></a>VelocityPolarWithZ
This DF represents a velocity vector in a polar or cylindrical coordinate system.
* _velocityMagnitude_ of type [**Speed**](#Speed) <br>
magnitude of the velocity vector on the reference plane, with the associated confidence value.
* _velocityDirection_ of type [**CartesianAngle**](#CartesianAngle) <br>
polar angle of the velocity vector on the reference plane, with the associated confidence value.
* _zVelocity_ of type [**VelocityComponent**](#VelocityComponent) OPTIONAL<br>
the optional z component of the velocity vector along the reference axis of the cylindrical coordinate system, with the associated confidence value.
**Categories:** Kinematic information
**Revision:** _Created in V2.1.1_
```asn1
VelocityPolarWithZ::= SEQUENCE {
velocityMagnitude Speed,
velocityDirection CartesianAngle,
zVelocity VelocityComponent OPTIONAL
}
```
### <a name="VruClusterInformation"></a>VruClusterInformation
* _clusterId_ of type [**Identifier1B**](#Identifier1B) OPTIONAL<br>
* _clusterBoundingBoxShape_ of type [**Shape**](#Shape) (WITH COMPONENTS{..., elliptical ABSENT, radial ABSENT, radialShapes ABSENT}) OPTIONAL<br>
optionally indicates the shape of the cluster bounding box, per default inside an East-North-Up coordinate system
centered around a reference point defined outside of the context of this DF.
* _clusterCardinalitySize_ of type [**CardinalNumber1B**](#CardinalNumber1B) <br>
indicates an estimation of the number of VRUs in the group, e.g. the known members in the cluster + 1 (for the cluster leader) .
* _clusterProfiles_ of type [**VruClusterProfiles**](#VruClusterProfiles) OPTIONAL<br>
optionally identifies all the VRU profile types that are estimated to be within the cluster.
if this component is absent it means that the information is unavailable.
**Categories:** VRU information
**Revision:** _Created in V2.1.1, description revised in V2.2.1_
clusterBoundingBoxShape Shape (WITH COMPONENTS{..., elliptical ABSENT, radial ABSENT, radialShapes ABSENT}) OPTIONAL,
### <a name="VruExteriorLights"></a>VruExteriorLights
This DF represents the status of the exterior light switches of a VRU.
This DF is an extension of the vehicular DE [**ExteriorLights**](#ExteriorLights).
It shall include the following components:
* _vehicular_ of type [**ExteriorLights**](#ExteriorLights) <br>
represents the status of the exterior light switches of a road vehicle.
* _vruSpecific_ of type [**VruSpecificExteriorLights**](#VruSpecificExteriorLights) <br>
represents the status of the exterior light switches of a VRU.
**Categories:** VRU information
**Revision:** _created in V2.1.1_
```asn1
VruExteriorLights ::= SEQUENCE {
vehicular ExteriorLights,
vruSpecific VruSpecificExteriorLights,
...
}
```
### <a name="VruProfileAndSubprofile"></a>VruProfileAndSubprofile
This DF indicates the profile of a VRU including sub-profile information
It identifies four options corresponding to the four types of VRU profiles specified in ETSI TS 103 300-2 [[18]](#references):
* _pedestrian_ of type [**VruSubProfilePedestrian**](#VruSubProfilePedestrian) <br>
* _bicyclistAndLightVruVehicle_ of type [**VruSubProfileBicyclist**](#VruSubProfileBicyclist) <br>
* _motorcyclist_ of type [**VruSubProfileMotorcyclist**](#VruSubProfileMotorcyclist) <br>
* _animal_ of type [**VruSubProfileAnimal**](#VruSubProfileAnimal) <br>
**Categories:** VRU information
**Revision:** _Created in V2.1.1_
```asn1
VruProfileAndSubprofile ::= CHOICE {
pedestrian VruSubProfilePedestrian,
bicyclistAndLightVruVehicle VruSubProfileBicyclist,
animal VruSubProfileAnimal,
...
}
```
### <a name="Wgs84Angle"></a>Wgs84Angle
This DF represents an angular component along with a confidence value in the WGS84 coordinate system.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
* _value_ of type [**Wgs84AngleValue**](#Wgs84AngleValue) <br>
the angle value, which can be estimated as the mean of the current distribution.
* _confidence_ of type [**Wgs84AngleConfidence**](#Wgs84AngleConfidence) <br>
the confidence value associated to the angle value.
**Categories:** GeoReference information
**Revision:** _Created in V2.1.1_
```asn1
Wgs84Angle ::= SEQUENCE {
value Wgs84AngleValue,
confidence Wgs84AngleConfidence
}
```
### <a name="YawRate"></a>YawRate
This DF represents a yaw rate of vehicle at a point in time.
* _yawRateValue_ of type [**YawRateValue**](#YawRateValue) <br>
* _yawRateConfidence_ of type [**YawRateConfidence**](#YawRateConfidence) <br>
confidence value associated to the yaw rate value.
**Categories:** Vehicle Information
```asn1
YawRate::= SEQUENCE {
yawRateValue YawRateValue,
yawRateConfidence YawRateConfidence
}
```
## References:
1. ETSI TS 103 900: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Part 2: Specification of Cooperative Awareness Basic Service; Release 2".
2. ETSI TS 103 831: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Part 3: Specifications of Decentralized Environmental Notification Basic Service"; Release 2.
3. [European Agreement (Applicable as from 1 January 2011): "Concerning the International Carriage of Dangerous Goods by Road"](http://www.unece.org/trans/danger/publi/adr/adr2011/11ContentsE.html).
4. [United Nations: "Recommendations on the Transport of Dangerous Goods - Model Regulations", Twelfth revised edition](http://www.unece.org/trans/danger/publi/unrec/12_e.html).
5. ETSI TS 101 539-1: "Intelligent Transport Systems (ITS); V2X Applications; Part 1: Road Hazard Signalling (RHS) application requirements specification".
6. ISO 3779 (2011-07): "Road vehicles - Vehicle identification number (VIN) Content and structure".
7. VDV recommendation 420 (1992): "Technical Requirements for Automatic Vehicle Location / Control Systems - Radio Data Transmission (BON Version) with Supplement 1 and Supplement 2".
8. ISO 1176:1990: "Road vehicles - Masses - Vocabulary and codes".
9. ETSI TS 103 916 Intelligent Transport Systems (ITS); Parking Availability Service Specification; Release 2
10. void
11. void
12. ETSI TS 103 300-3: "Intelligent Transport Systems (ITS); Vulnerable Road Users (VRU) awareness; Part 3: Specification of VRU awareness basic service; Release 2"
13. ETSI TS 103 724: "Intelligent Transport Systems (ITS); Facilities layer function; Interference Management Zone Message (IMZM); Release 2"
14. ETSI TS 102 792: "Intelligent Transport Systems (ITS); Mitigation techniques to avoid interference between European CEN Dedicated Short Range Communication (CEN DSRC) equipment and Intelligent Transport Systems (ITS) operating in the 5 GHz frequency range".
15. ETSI TS 103 301: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Facilities layer protocols and communication requirements for infrastructure services; Release 2".
16. UNECE/TRANS/WP.29/78/Rev.4: "Consolidated Resolution on the Construction of Vehicles (R.E.3)".
17. ETSI EN 302 890-1: "Intelligent Transport Systems (ITS); Facilities layer function; Part 1: Services Announcement (SA) specification".
18. ETSI TS 103 300-2 "Intelligent Transport System (ITS); Vulnerable Road Users (VRU) awareness; Part 2: Functional Architecture and Requirements definition; Release 2"
19. ETSI TS 103 175: "Intelligent Transport Systems (ITS); Cross Layer DCC Management Entity for operation in the ITS G5A and ITS G5B medium"
20. ETSI EN 302 571: "Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU"
21. ISO 8855: "Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary".
22. ISO 3833: "Road vehicles - Types - Terms and definitions".
23. ISO 14816:2015 + Amd1:2019: " Road transport and traffic telematics Automatic vehicle and equipment identification Numbering and data structure"
24. ISO 17573-3: "Electronic fee collection System architecture for vehicle-related tolling Part 3: Data dictionary"
25. ISO 3166-1: "Codes for the representation of names of countries and their subdivisions Part 1: Country code"