Newer
Older
[MODULE_PARAMETERS]
# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.
# The GeoNetworking address of the IUT. See testdata set and plugtest1026-log-locD 002.pcap
LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {
typeOfAddress := e_initial,
# IUT Station ID. See testdata set and plugtest1026-log-locD 002.pcap
LibItsCommon_Pixits.PX_IUT_STATION_ID := 10143;
# GeoNetwoking only, no facility layer
LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any
#LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpA
[LOGGING]
# In this section you can specify the name of the log file and the classes of events
# you want to log into the file or display on console (standard error).
LogFile := "../logs/%e.%h-%r.%s"
FileMask := LOG_ALL | USER | DEBUG | MATCHING
ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING
#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
LogSourceInfo := Stack
LogEntityName:= Yes
LogEventTypes:= Yes
#TimeStampFormat := DateTime
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# ll_address : GeoNetworking address of the Test System
# latitude : Latitude of the Test System
# longitude : Kongitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# secured_mode : Set to 1 if message exchanges shall be secured
# certificate : Certificate identifier the Test Adapter shall use
# secure_db_path : Path to the certificates and keys storage location
# hash : Hash algorithm to be used when secured mode is set
# Authorized values are SHA-256 or SHA-384
# Default: SHA-256
# signature : Signature algorithm to be used when secured mode is set
# Authorized values are NISTP-256, NISTP-384, BP-256 and BP-384
# Default: NISTP-256
# cypher : Cyphering algorithm to be used when secured mode is set
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# nic: Local NIC
# If set, online mode is used
# file : File to read
# frame_offset: Frame offset, used to skip packets with frame number < frame_offset
# time_offset : Time offset, used to skip packets with time offset < time_offset
# save_mode : 1 to save sent packet, 0 otherwise
#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=enp0s8,file=,filter=and ether proto 0x8947,frame_offset=0,save_mode=1)"
#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=../../../testdata/test_61_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"
system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=38,secured_mode=1,certificate=ta_at_cert_nistp256_sha256)/COMMSIGNIA(mac_src=4C5E0C14D2EA,bc=FFFFFFFFFFFF,eth_type=8947,target_host=10.200.1.101,target_port=7942,sourcePort=7943,its_aid=38,interface_id=2,tx_power=-32)/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,file=../../../testdata/commsignia_61_beacon.pcap,filter=and (udp port 30000 or udp port 7943))"
Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"
Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"
system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0)"
#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,device_mode=1)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,beaconing=1,device_mode=1,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_cam.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP(type=btpB,dst_port=2001,src_port=0,device_mode=1)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,beaconing=1,device_mode=1,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
system.denmPort.params := "DENM(next_header=btpB)/BTP(type=btpB,dst_port=2002,src_port=0,device_mode=1)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,device_mode=1,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_denm.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
#system.denmPort.params := "DENM(next_header=btpB,header_type=tsb)/BTP(type=btpB,dst_port=2002,src_port=0,device_mode=1)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,device_mode=1,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
system.ivimPort.params := "IVIM/BTP(type=btpB,dst_port=2005,src_port=0,device_mode=1)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,device_mode=1,its_aid=38)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_ivim.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12346)"
#TestCodec_GeoNetworking.tc_GeoNetReq_AnycastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_BroadcastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_UnicastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_BeaconPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_LsRequestPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_LsReplyPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_AnycastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_BroadcastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket_1
#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv
#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_1
#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_2
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_1
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_2
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_1
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_2
# GeoNetworking port tests
# To run the GeoNetworking port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_GeoNetworking.tc_GeoNet_Port_1 # Use simulator of file to run this test
# Used to test device_mode=0,beaconing=1,beacon codec
# No startPassBeaconing
TestCodec_GeoNetworking.tc_GeoNet_Port_2 # Use simulator of file to run this test
# Used to test device_mode=0,beaconing=1,beacon codec
# With startPassBeaconing
#TestCodec_GeoNetworking.tc_GeoNet_MultiPort # Use simulator or file to run this test
#TestCodec_GeoNetworking.tc_GeoNet_Port_utPort # Use simulator or file to run this test
#TestCodec_GeoNetworking.tc_GeoNet_UtGnInitialize
#TestCodec_GeoNetworking.tc_GeoNet_UtGnChangePosition
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_2
# Btp PDU
#TestCodec_Btp.tc_Btp_A_Without_Payload
#TestCodec_Btp.tc_Btp_A
#TestCodec_Btp.tc_Btp_B
#TestCodec_Btp.tc_BtpReq_A
# Btp Port
#TestCodec_Btp.tc_Btp_Port
#TestCodec_CAM.tc_CamReq
#TestCodec_CAM.tc_CamInd_1
#TestCodec_CAM.tc_CamInd_2
# CAM port tests
# To run the CAM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_CAM.tc_Cam_Port # Use simulator of file to run this test
# Used to test device_mode=1,beaconing=1
#TestCodec_CAM.tc_Cam_UtCamInitialize
#TestCodec_CAM.tc_Cam_UtCamChangePosition
#TestCodec_CAM.tc_Cam_UtCamChangeCurvature
#TestCodec_CAM.tc_Cam_UtCamChangeSpeed
#TestCodec_CAM.tc_Cam_UtCamSetAccelerationControlStatus
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_lowBeamHeadlightsOn
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_leftTurnSignalOn
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_daytimeRunningLightsOn
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_parkingLightsOn
#TestCodec_CAM.tc_Cam_UtCamChangeHeading
#TestCodec_CAM.tc_Cam_UtCamSetDriveDirection
#TestCodec_CAM.tc_Cam_UtCamChangeYawRate
#TestCodec_CAM.tc_Cam_UtCamChangeYawRate_negative
#TestCodec_CAM.tc_Cam_UtCamSetStationType
#TestCodec_CAM.tc_Cam_UtCamSetVehicleRole
#TestCodec_CAM.tc_Cam_UtCamSetDangerousGoods
#TestCodec_CAM.tc_Cam_UtCamSetLightBarSirene
#TestCodec_CAM.tc_Cam_UtCamTriggerResult
#TestCodec_CAM.tc_Cam_UtCamEventInd_1
#TestCodec_CAM.tc_Cam_UtCamEventInd_2
#TestCodec_DENM.tc_DenmReq
#TestCodec_DENM.tc_DenmInd
# To run the DENM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_DENM.tc_Denm_Port # Use simulator of file to run this test
# Used to test device_mode=1,beaconing=1
#TestCodec_DENM.tc_Denm_Port_utPort
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
#TestCodec_DENM.tc_Denm_UtDenmInitialize
#TestCodec_DENM.tc_Denm_UtDenmChangePosition
#TestCodec_DENM.tc_Denm_UtDenmChangePseudonym
#TestCodec_DENM.tc_Denm_UtDenmTrigger_1
#TestCodec_DENM.tc_Denm_UtDenmTrigger_2
#TestCodec_DENM.tc_Denm_UtDenmUpdate_1
#TestCodec_DENM.tc_Denm_UtDenmUpdate_2
#TestCodec_DENM.tc_Denm_UtDenmTriggerResult
#TestCodec_DENM.tc_Denm_UtDenmUpdateResult
#TestCodec_DENM.tc_Denm_UtDenmEventInd_1
#TestCodec_DENM.tc_Denm_UtDenmEventInd_2
# IVIM PDU
#TestCodec_IVIM.tc_IvimReq
#TestCodec_IVIM.tc_IvimInd_1
#TestCodec_IVIM.tc_IvimInd_2
# IVIM port tests
# To run the IVIM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_IVIM.tc_Ivim_Port
# IVIM UpperTester
#TestCodec_IVIM.tc_Ivim_UtIvimInitialize
#TestCodec_IVIM.tc_Ivim_UtIvimTrigger_1
#TestCodec_IVIM.tc_Ivim_UtIvimTrigger_2
#TestCodec_IVIM.tc_Ivim_UtIvimUpdate
#TestCodec_IVIM.tc_Ivim_UtIvimTermination
# Security tests
# Security Functions
#TestCodec_SecuredFuntions.tc_sha256_1
#TestCodec_SecuredFuntions.tc_sha384_1
#TestCodec_SecuredFuntions.tc_f_generate_key_pair_1
#TestCodec_SecuredFuntions.tc_f_generate_key_pair_2
#TestCodec_SecuredFuntions.tc_f_generate_key_pair_3
#TestCodec_SecuredFuntions.tc_f_signWithEcdsaNistp256WithSha256_1
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaNistp256WithSha256_1
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaNistp256WithSha256_2
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaNistp256WithSha256_3
#TestCodec_SecuredFuntions.tc_f_signWithEcdsaBrainpoolp256WithSha256_1
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaBrainpoolp256WithSha256_1
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaBrainpoolp256WithSha256_2
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaBrainpoolp256WithSha256_3
#TestCodec_SecuredFuntions.tc_f_signWithEcdsaBrainpoolp384WithSha384_1
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaBrainpoolp384WithSha384_1
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaBrainpoolp384WithSha384_2
#TestCodec_SecuredFuntions.tc_f_verifyWithEcdsaBrainpoolp384WithSha384_3
#TestCodec_Certificates.tc_root_certificate_sha256_1
#TestCodec_Certificates.tc_root_certificate_sha256_2
#TestCodec_Certificates.tc_root_certificate_sha384_1
#TestCodec_Certificates.tc_at_certificate_sha256_1
#TestCodec_Certificates.tc_at_certificate_sha256_2
#TestCodec_Certificates.tc_certificate_asn1c_1
#TestCodec_SecuredMessages.tc_ssp_cam_1
#TestCodec_SecuredMessages.tc_ssp_cam_2
#TestCodec_SecuredMessages.tc_secured_message_unsecured
#TestCodec_SecuredMessages.tc_secured_message_signed_1
#TestCodec_SecuredMessages.tc_secured_message_signed_2
#TestCodec_ChainOfCertificates.tc_full_check_certificate_1
#TestCodec_ChainOfCertificates.tc_full_check_certificate_2