Skip to content
GitLab
Commit 1de092ea authored by garciay's avatar garciay
Browse files

Start validation of TD_AUTO_IOT_DENM_RWW_BV_01

parent 8f370a3f
Expand all Hide whitespace changes
Inline Side-by-side
etc/AtsAutoInterop/AtsAutoInterop.cfg
View file @ 1de092ea
......@@ -3,22 +3,25 @@
# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.
LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {
typeOfAddress := e_initial,
stationType := e_passengerCar,
stationType := e_unknown,
stationCountryCode := 0,
mid := '92569202017a'O
mid := '4C5E0C14D2EA'O
}
LibItsCommon_Pixits.PX_IUT_STATION_ID := 10143;
LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any
LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB
ItsAutoInterop_Pixits.PX_CAPTURE_MODE := "off-link"
[LOGGING]
# In this section you can specify the name of the log file and the classes of events
# you want to log into the file or display on console (standard error).
LogFile := "../logs/%e.%h-%r.%s"
FileMask := LOG_ALL | USER | DEBUG | MATCHING
ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING
#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#FileMask := LOG_ALL | USER | DEBUG | MATCHING
#ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING
FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
LogSourceInfo := Stack
LogEntityName:= Yes
LogEventTypes:= Yes
......@@ -26,150 +29,66 @@ LogEventTypes:= Yes
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
# ll_address : GeoNetworking address of the TestSystem
# latitude : latitude of the TestSystem
# longitude : longitude of the TestSystem
# ll_address : GeoNetworking address of the Test System
# latitude : latitude of the Test System
# longitude : longitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# Ethernet layer
# Source MAC address: mac_src
# Broadcast address : mac_bc
# Ethernet type : eth_type
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# Pcap filter: filter
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# Online mode:
# Local NIC: nic
# If set, online mode is used
# nic: Local NIC
# If set, online mode is used
# Offline mode (nic is present but not set):
# File to read : file
# Frame offset : frame_offset
# Time offset : time_offset
# Save sent packet: save_mode=[0|1]
# file : File to read
# frame_offset: Frame offset, used to skip packets with frame number < frame_offset
# time_offset : Time offset, used to skip packets with time offset < time_offset
# save_mode : 1 to save sent packet, 0 otherwise
# Single GeoNetworking component port
system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=../../../testdata/test_1_beacon.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=1)"
# Multiple GeoNetworking component port
Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"
Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"
# BTP port
system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0)"
# CAM port
system.camPort.params := "CAM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_cam.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
# DENM port
system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2002,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_denm.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"
NodeB.geoNetworkingPort.params := "GN(ll_address=04e548000001,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/COMMSIGNIA(mac_src=04e548000001,mac_bc=FFFFFFFFFFFF,eth_type=8947,target_host=10.200.1.101,target_port=7942,source_port=7943,its_aid=141,interface_id=2,tx_power=-32)/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=04e548000001,file=/home/ubuntu/TriesAndDelete/etsi_its/testdata/TC_AUTO_IOT_DENM_RWW_BV_01.pcap,filter=and (udp port 30000 or udp port 7943))"
NodeC.geoNetworkingPort.params := "GN(ll_address=70b3d5791b48,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/COMMSIGNIA(mac_src=70b3d5791b48,mac_bc=FFFFFFFFFFFF,eth_type=8947,target_host=10.200.1.101,target_port=7942,source_port=7943,its_aid=141,interface_id=2,tx_power=-32)/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=70b3d5791b48,file=/home/ubuntu/TriesAndDelete/etsi_its/testdata/TC_AUTO_IOT_DENM_RWW_BV_01.pcap,filter=and (udp port 30000 or udp port 7943))"
# GeoNetworking UpperTester port based on UDP
system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12346)"
# UpperTester port based on UDP
system.utPort.params := "UT_GN/UDP(dst_ip=192.168.1.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12346)"
[EXECUTE]
# GeoNetworking Req
#TestCodec_GeoNetworking.tc_GeoNetReq_AnycastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_BroadcastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_UnicastPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_BeaconPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_LsRequestPacket
#TestCodec_GeoNetworking.tc_GeoNetReq_LsReplyPacket
# GeoNetworking Ind
#TestCodec_GeoNetworking.tc_GeoNetInd_AnycastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_BroadcastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket
#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket
# GeoNetworking port tests
# To run the GeoNetworking port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_GeoNetworking.tc_GeoNet_Port
TestCodec_GeoNetworking.tc_GeoNet_Port_utPort
# GeoNetworking AC port
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv
#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_1
#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_2
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_1
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_2
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_1
#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_2
#TestCodec_GeoNetworking.tc_GeoNet_MultiPort
# GeoNetworking UpperTester
#TestCodec_GeoNetworking.tc_GeoNet_UtGnInitialize
#TestCodec_GeoNetworking.tc_GeoNet_UtGnChangePosition
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_2
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_1
#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_2
# Btp PDU
#TestCodec_Btp.tc_Btp_A_Without_Payload
#TestCodec_Btp.tc_Btp_A
#TestCodec_Btp.tc_Btp_B
#TestCodec_Btp.tc_BtpReq_A
# Btp Port
#TestCodec_Btp.tc_Btp_Port
# CAM PDU tests
#TestCodec_CAM.tc_CamReq
#TestCodec_CAM.tc_CamInd
# CAM port tests
# To run the CAM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_CAM.tc_Cam_Port
# CAM UpperTester
#TestCodec_CAM.tc_Cam_UtCamInitialize
#TestCodec_CAM.tc_Cam_UtCamChangePosition
#TestCodec_CAM.tc_Cam_UtCamChangeCurvature
#TestCodec_CAM.tc_Cam_UtCamChangeSpeed
#TestCodec_CAM.tc_Cam_UtCamSetAccelerationControlStatus
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_lowBeamHeadlightsOn
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_leftTurnSignalOn
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_daytimeRunningLightsOn
#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_parkingLightsOn
#TestCodec_CAM.tc_Cam_UtCamChangeHeading
#TestCodec_CAM.tc_Cam_UtCamSetDriveDirection
#TestCodec_CAM.tc_Cam_UtCamChangeYawRate
#TestCodec_CAM.tc_Cam_UtCamChangeYawRate_negative
#TestCodec_CAM.tc_Cam_UtCamSetStationType
#TestCodec_CAM.tc_Cam_UtCamSetVehicleRole
#TestCodec_CAM.tc_Cam_UtCamSetDangerousGoods
#TestCodec_CAM.tc_Cam_UtCamSetLightBarSirene
#TestCodec_CAM.tc_Cam_UtCamTriggerResult
#TestCodec_CAM.tc_Cam_UtCamEventInd_1
#TestCodec_CAM.tc_Cam_UtCamEventInd_2
# DENM PDU
#TestCodec_DENM.tc_DenmReq
#TestCodec_DENM.tc_DenmInd
# CAM port tests
# To run the DENM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file
#TestCodec_DENM.tc_Denm_Port
#TestCodec_DENM.tc_Denm_Port_utPort
# DENM UpperTester
#TestCodec_DENM.tc_Denm_UtDenmInitialize
#TestCodec_DENM.tc_Denm_UtDenmChangePosition
#TestCodec_DENM.tc_Denm_UtDenmChangePseudonym
#TestCodec_DENM.tc_Denm_UtDenmTrigger_1
#TestCodec_DENM.tc_Denm_UtDenmTrigger_2
#TestCodec_DENM.tc_Denm_UtDenmUpdate_1
#TestCodec_DENM.tc_Denm_UtDenmUpdate_2
#TestCodec_DENM.tc_Denm_UtDenmTriggerResult
#TestCodec_DENM.tc_Denm_UtDenmUpdateResult
#TestCodec_DENM.tc_Denm_UtDenmEventInd_1
#TestCodec_DENM.tc_Denm_UtDenmEventInd_2
ItsAutoInterop_TestCases.TC_AUTO_IOT_DENM_RWW_BV_01
[MAIN_CONTROLLER]
# The options herein control the behavior of MC.
......
etc/AtsAutoInterop/ItsAutoInterop_Pixits.ttcn deleted 100644 → 0
View file @ 8f370a3f
module ItsAutoInterop_Pixits {
// Libcommon
import from LibCommon_BasicTypesAndValues all;
// ItsInterop
import from ItsAutoInterop_TypesAndValues all;
/**
* @desc
* Possible values: on-link or off-link
*/
modulepar charstring PX_CAPTURE_MODE := "on-link";
/**
* @desc The PCAP file name containing the ITS G5 captures
*/
modulepar charstring PX_PCAP_FILE_NAME := "g5capture.pcap";
/**
* @desc The PCAP filtering to apply
*/
modulepar charstring PX_PCAP_MIDs_FILTER := "00:00:00:00:00:01;00:00:00:00:00:02";
/**
* @desc The PCAP frame offsets to skip when starting to play the PCAP file
*/
modulepar UInt32 PX_PCAP_START_OFFSET := 0;
/**
* EUTs descriptions
*/
modulepar EutDescriptions PX_EUT_DESC := {
{
'04e548000001'O,
10171,
'04e548000001'O
}, // EUT_1
{
'70b3d5791b48'O,
10031,
'70b3d5791b48'O
}, // EUT_2
{
'000000000003'O,
333,
'000000000003'O
}, // EUT_3
{
'000000000004'O,
444,
'000000000004'O
} // EUT_4
}
/**
* @desc EUT1 identifier to refer to its @see EutDescriptions
*/
modulepar integer PX_EUT1_ID := 0;
/**
* @desc EUT2 identifier to refer to its @see EutDescriptions
*/
modulepar integer PX_EUT2_ID := 1;
/**
* @desc EUT3 identifier to refer to its @see EutDescriptions
*/
modulepar integer PX_EUT3_ID := 2;
/**
* @desc EUT4 identifier to refer to its @see EutDescriptions
*/
modulepar integer PX_EUT4_ID := 3;
/**
* @desc Pre-defined security distance
*/
modulepar float PX_PRE_DEFINED_SECURITY_DISTANCE := 0.0;
/**
* @desc Pre-defined security distance for forward collision risk condition
*/
modulepar float PX_FORWARD_COLLISION_SECURITY_DISTANCE := 0.0;
/**
* @desc Pre-defined security distance for forward collision risk condition
*/
modulepar float PX_LATERAL_COLLISION_SECURITY_DISTANCE := 0.0;
/**
* @desc DENM cause variant
* @see Draft ETSI TS yyy xxx-2 V0.0.87 (2017-03) Table 4: Possible DENM cause values (ETSI EN 302 637-3 [5] Table 10: Cause description and cause code assignment for ETSI use case)
*/
modulepar integer PX_DENM_CAUSE_VA := 1;
/**
* @desc DENM subcause variant
* @see Draft ETSI TS yyy xxx-2 V0.0.87 (2017-03) Table 5: Possible DENM sub-cause values (ETSI EN 302 637-3 [5] Table 10: Cause description and cause code assignment for ETSI use case)
*/
modulepar integer PX_DENM_SUBCAUSE_VA := 1;
} // End of module ItsAutoInterop_Pixits
etc/AtsAutoInterop/ItsAutoInterop_TestCases.ttcn deleted 100644 → 0
View file @ 8f370a3f
This diff is collapsed.
etc/AtsCAM/AtsCAM.cfg
View file @ 1de092ea
......@@ -26,41 +26,56 @@ LogEventTypes:= Yes
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
# ll_address : GeoNetworking address of the TestSystem
# latitude : latitude of the TestSystem
# longitude : longitude of the TestSystem
# distanceA : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
# distanceB : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
# angle : Anglee for the GeoAreaBroadcast, used for CAM/DENM sending (default: 0m)
# beaconing : Set to 1 if GnLayer shall start beaconing (default: 0)
# ll_address : GeoNetworking address of the Test System
# latitude : latitude of the Test System
# longitude : longitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# Ethernet layer
# Source MAC address of the TestSystem : mac_src
# Broadcast address : mac_bc
# Ethernet type for ITS : eth_type
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd), the IUT
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd), the TestSystem
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# Pcap filter : filter
# mac_src : used to exclude TestSystem sent message from the capture
# Online mode :
# Local NIC : nic
# If set, online mode is used
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# Online mode:
# nic: Local NIC
# If set, online mode is used
# Offline mode (nic is present but not set):
# File to read : file
# Frame offset : frame_offset
# Time offset : time_offset
# Save sent packet: save_mode=[0|1]
# file : File to read
# frame_offset: Frame offset, used to skip packets with frame number < frame_offset
# time_offset : Time offset, used to skip packets with time offset < time_offset
# save_mode : 1 to save sent packet, 0 otherwise
system.camPort.params := "CAM/BTP(type=btpB,dst_port=2001,src_port=0,deviceMode=1)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,deviceMode=1,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
......
etc/AtsDENM/AtsDENM.cfg
View file @ 1de092ea
......@@ -26,39 +26,56 @@ LogEventTypes:= Yes
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
# ll_address : GeoNetworking address of the TestSystem
# latitude : latitude of the TestSystem
# longitude : longitude of the TestSystem
# distanceA : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
# distanceB : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
# angle : Anglee for the GeoAreaBroadcast, used for CAM/DENM sending (default: 0m)
# beaconing : Set to 1 if GnLayer shall start beaconing (default: 0)
# ll_address : GeoNetworking address of the Test System
# latitude : latitude of the Test System
# longitude : longitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# Ethernet layer
# Source MAC address of the TestSystem : mac_src
# Broadcast address : mac_bc
# Ethernet type for ITS : eth_type
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd), the IUT
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd), the TestSystem
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# Pcap filter : filter
# mac_src : used to exclude TestSystem sent message from the capture
# Online mode :
# Local NIC : nic
# If set, online mode is used
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# Online mode:
# nic: Local NIC
# If set, online mode is used
# Offline mode (nic is present but not set):
# File to read : file
# Frame offset : frame_offset
# Time offset : time_offset
# Save sent packet: save_mode=[0|1]
# file : File to read
# frame_offset: Frame offset, used to skip packets with frame number < frame_offset
# time_offset : Time offset, used to skip packets with time offset < time_offset
# save_mode : 1 to save sent packet, 0 otherwise
system.denmPort.params := "DENM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,expiry=1000,beaconing=0,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
......
etc/AtsGeoNetworking/AtsGeoNetworking.cfg
View file @ 1de092ea
......@@ -26,38 +26,56 @@ LogEventTypes:= Yes
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
# ll_address : GeoNetworking address of the TestSystem
# latitude : latitude of the TestSystem
# longitude : longitude of the TestSystem
# distanceA : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
# distanceB : Distance for the GeoAreaBroadcast, used for CAM/DENM sending (default: 1000m)
# angle : Anglee for the GeoAreaBroadcast, used for CAM/DENM sending (default: 0m)
# beaconing : Set to 1 if GnLayer shall start beaconing (default: 0)
# ll_address : GeoNetworking address of the Test System
# latitude : latitude of the Test System
# longitude : longitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# Ethernet layer
# Source MAC address: mac_src
# Broadcast address : mac_bc
# Ethernet type : eth_type
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# Pcap filter: filter
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# Online mode:
# Local NIC: nic
# If set, online mode is used
# nic: Local NIC
# If set, online mode is used
# Offline mode (nic is present but not set):
# File to read : file
# Frame offset : frame_offset
# Time offset : time_offset
# Save sent packet: save_mode=[0|1]
# file : File to read
# frame_offset: Frame offset, used to skip packets with frame number < frame_offset
# time_offset : Time offset, used to skip packets with time offset < time_offset
# save_mode : 1 to save sent packet, 0 otherwise
# Single GeoNetworking component port
system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"
......
etc/AtsIVIM/AtsIVIM.cfg
View file @ 1de092ea
......@@ -26,39 +26,56 @@ LogEventTypes:= Yes
[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# header_sub_type : sh (single hop)
# DENM Layer
# next_header : btpA|btpB (overwrite BTP.type)
# header_type : tsb|gbc
# BTP Layer
# type : btpA|btpB
# destination port: dst_port
# source port : src_port
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
# ll_address : GeoNetworking address of the TestSystem
# latitude : latitude of the TestSystem
# longitude : longitude of the TestSystem
# distanceA : Distance for the GeoAreaBroadcast (default: 1000m)
# distanceB : Distance for the GeoAreaBroadcast sending (default: 1000m)
# angle : Anglee for the GeoAreaBroadcast sending (default: 0m)
# beaconing : Set to 1 if GnLayer shall start beaconing (default: 0)
# ll_address : GeoNetworking address of the Test System
# latitude : latitude of the Test System
# longitude : longitude of the Test System
# beaconing : Set to 1 if GnLayer shall start beaconing
# Beaconning timer expiry: expiry (ms)
# device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
# Ethernet layer
# Source MAC address of the TestSystem : mac_src
# Broadcast address : mac_bc
# Ethernet type for ITS : eth_type
# mac_src :Source MAC address
# mac_bc :Broadcast address
# eth_type : Ethernet type
# Commsignia layer
# mac_src : Device MAC address, used to discard packets
# To indicate no filering, use the value 000000000000
# mac_bc : Broadcast address
# eth_type : Ethernet type, used to discard packets
# target_host : Device address
# target_port : Device port
# source_port : Test System port
# interface_id: Interface id, used to discard packets
# tx_power : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
# dst_ip : destination IPv4 address (aa.bb.cc.dd), the IUT
# dst_ip : destination IPv4 address (aa.bb.cc.dd)
# dst_port: destination port
# src_ip : source IPv4 address (aa.bb.cc.dd), the TestSystem
# src_ip : source IPv4 address (aa.bb.cc.dd)
# src_port: source port
# Pcap layer
# Pcap filter : filter
# mac_src : used to exclude TestSystem sent message from the capture
# Online mode :
# Local NIC : nic
# If set, online mode is used
# mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System
# filter : Pcap filter (compliant with tcpdump syntax)
# Online mode:
# nic: Local NIC
# If set, online mode is used
# Offline mode (nic is present but not set):
# File to read : file
# Frame offset : frame_offset