Commit c0d71ba5 authored by garciay's avatar garciay
Browse files

Prepare Doxygen documentation

parent 1f9de029

etc/CAM/ITSTS.cfg

0 → 100644
+177 −0
Original line number Diff line number Diff line 


[MODULE_PARAMETERS]

# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {

  typeOfAddress := e_initial,

  stationType := e_passengerCar,

  stationCountryCode := 0,

  mid := '92569202017a'O

}



LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any



[LOGGING]

# In this section you can specify the name of the log file and the classes of events

# you want to log into the file or display on console (standard error).



LogFile := "../logs/%e.%h-%r.%s"

FileMask := LOG_ALL | USER | DEBUG | MATCHING

ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING

#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

LogSourceInfo := Stack

LogEntityName:= Yes

LogEventTypes:= Yes

#TimeStampFormat := DateTime



[TESTPORT_PARAMETERS]

# In this section you can specify parameters that are passed to Test Ports.

# BTP Layer

#   type            : btpA|btpB

#   destination port: dst_port

#   source port     : src_port

# GN Layer

#   ll_address             : GeoNetworking address of the TestSystem

#   latitude               : latitude of the TestSystem

#   longitude              : longitude of the TestSystem

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

# Ethernet layer

#   Source MAC address: mac_src

#   Broadcast address : mac_bc

#   Ethernet type     : eth_type

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

# Pcap layer

#   Pcap filter: filter

#   Online mode:

#     Local NIC: nic

#                If set, online mode is used

#   Offline mode (nic is present but not set):

#     File to read    : file

#     Frame offset    : frame_offset

#     Time offset     : time_offset

#     Save sent packet: save_mode=[0|1]



# Single GeoNetworking component port

system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=/home/ubuntu/tmp/TC_GEONW_PON_BEA_TI_02.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_beacon.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"



# Multiple GeoNetworking component port

Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"

Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"



# BTP port

system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"



# CAM port

system.camPort.params := "CAM/BTP(type=btpA,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"



# DENM port

system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_denm.pcap,filter=ether proto 0x8947,frame_offset=0)"



# UpperTester port based on UDP

system.utPort.params := "UT/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=udp port 12346)"



[EXECUTE]

# GeoNetworking Req

#TestCodec_GeoNetworking.tc_GeoNetReq_AnycastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_BroadcastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_BeaconPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_LsRequestPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_LsReplyPacket

# GeoNetworking Ind

#TestCodec_GeoNetworking.tc_GeoNetInd_AnycastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BroadcastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket

# GeoNetworking Port

#TestCodec_GeoNetworking.tc_GeoNet_Port

#TestCodec_GeoNetworking.tc_GeoNet_Port_utPort

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_1

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_2

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_1

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_2

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_1

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_2

#TestCodec_GeoNetworking.tc_GeoNet_MultiPort

#GeoNetworking UpperTester

#TestCodec_GeoNetworking.tc_GeoNet_UtGnInitialize

#TestCodec_GeoNetworking.tc_GeoNet_UtGnChangePosition

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_2



# Btp PDU

#TestCodec_Btp.tc_Btp_A_Without_Payload

#TestCodec_Btp.tc_Btp_A

#TestCodec_Btp.tc_Btp_B

#TestCodec_Btp.tc_BtpReq_A

# Btp Port

#TestCodec_Btp.tc_Btp_Port



# CAM PDU

#TestCodec_CAM.tc_CamReq

#TestCodec_CAM.tc_CamInd

TestCodec_CAM.tc_Cam_Port

# CAM UpperTester

#TestCodec_CAM.tc_Cam_UtCamInitialize

#TestCodec_CAM.tc_Cam_UtCamChangePosition

#TestCodec_CAM.tc_Cam_UtCamChangeCurvature

#TestCodec_CAM.tc_Cam_UtCamChangeSpeed

#TestCodec_CAM.tc_Cam_UtCamSetAccelerationControlStatus

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_lowBeamHeadlightsOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_leftTurnSignalOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_daytimeRunningLightsOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_parkingLightsOn

#TestCodec_CAM.tc_Cam_UtCamChangeHeading

#TestCodec_CAM.tc_Cam_UtCamSetDriveDirection

#TestCodec_CAM.tc_Cam_UtCamChangeYawRate

#TestCodec_CAM.tc_Cam_UtCamChangeYawRate_negative

#TestCodec_CAM.tc_Cam_UtCamSetStationType

#TestCodec_CAM.tc_Cam_UtCamSetVehicleRole

#TestCodec_CAM.tc_Cam_UtCamSetDangerousGoods

#TestCodec_CAM.tc_Cam_UtCamSetLightBarSirene

#TestCodec_CAM.tc_Denm_UtCamTriggerResult

#TestCodec_CAM.tc_Cam_UtCamEventInd_1

#TestCodec_CAM.tc_Cam_UtCamEventInd_2



# DENM PDU

#TestCodec_DENM.tc_DenmReq

#TestCodec_DENM.tc_DenmInd

TestCodec_DENM.tc_Denm_Port

#TestCodec_DENM.tc_Denm_Port_utPort

# DENM UpperTester

#TestCodec_DENM.tc_Denm_UtDenmInitialize

#TestCodec_DENM.tc_Denm_UtDenmChangePosition

#TestCodec_DENM.tc_Denm_UtDenmChangePseudonym

#TestCodec_DENM.tc_Denm_UtDenmTrigger_1

#TestCodec_DENM.tc_Denm_UtDenmTrigger_2

#TestCodec_DENM.tc_Denm_UtDenmUpdate_1

#TestCodec_DENM.tc_Denm_UtDenmTriggerResult

#TestCodec_DENM.tc_Denm_UtDenmUpdateResult

#TestCodec_DENM.tc_Denm_UtDenmEventInd_1

#TestCodec_DENM.tc_Denm_UtDenmEventInd_2



[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

KillTimer := 10.0

TCPPort := 0

LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1

etc/DENM/ITSTS.cfg

0 → 100644
+75 −0
Original line number Diff line number Diff line 


[MODULE_PARAMETERS]

# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {

  typeOfAddress := e_initial,

  stationType := e_passengerCar,

  stationCountryCode := 0,

  mid := '92569202017a'O

}



LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any



[LOGGING]

# In this section you can specify the name of the log file and the classes of events

# you want to log into the file or display on console (standard error).



LogFile := "../logs/%e.%h-%r.%s"

FileMask := LOG_ALL | USER | DEBUG | MATCHING

ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING

#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

LogSourceInfo := Stack

LogEntityName:= Yes

LogEventTypes:= Yes

#TimeStampFormat := DateTime



[TESTPORT_PARAMETERS]

# In this section you can specify parameters that are passed to Test Ports.

# BTP Layer

#   type            : btpA|btpB

#   destination port: dst_port

#   source port     : src_port

# GN Layer

#   ll_address             : GeoNetworking address of the TestSystem

#   latitude               : latitude of the TestSystem

#   longitude              : longitude of the TestSystem

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

# Ethernet layer

#   Source MAC address: mac_src

#   Broadcast address : mac_bc

#   Ethernet type     : eth_type

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

# Pcap layer

#   Pcap filter: filter

#   Online mode:

#     Local NIC: nic

#                If set, online mode is used

#   Offline mode (nic is present but not set):

#     File to read    : file

#     Frame offset    : frame_offset

#     Time offset     : time_offset

#     Save sent packet: save_mode=[0|1]



#system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_denm.pcap,filter=ether proto 0x8947,frame_offset=0)"

system.denmPort.params := "DENM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=ether proto 0x8947)"



# UpperTester port based on UDP

system.utPort.params := "UT/UDP(dst_ip=172.28.1.208,dst_port=12346,src_ip=172.28.1.253,src_port=12345)/ETH(mac_src=0800275c4959,mac_dst=DC536045AF7E,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=udp port 12346)"



[EXECUTE]

ItsDenm_TestCases.DEN_MSGF_BV_01



[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

KillTimer := 10.0

TCPPort := 0

LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1

etc/GeoNetworking/ITSTS.cfg

0 → 100644
+177 −0
Original line number Diff line number Diff line 


[MODULE_PARAMETERS]

# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {

  typeOfAddress := e_initial,

  stationType := e_passengerCar,

  stationCountryCode := 0,

  mid := '92569202017a'O

}



LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any



[LOGGING]

# In this section you can specify the name of the log file and the classes of events

# you want to log into the file or display on console (standard error).



LogFile := "../logs/%e.%h-%r.%s"

FileMask := LOG_ALL | USER | DEBUG | MATCHING

ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING

#FileMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

#ConsoleMask := ERROR | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

LogSourceInfo := Stack

LogEntityName:= Yes

LogEventTypes:= Yes

#TimeStampFormat := DateTime



[TESTPORT_PARAMETERS]

# In this section you can specify parameters that are passed to Test Ports.

# BTP Layer

#   type            : btpA|btpB

#   destination port: dst_port

#   source port     : src_port

# GN Layer

#   ll_address             : GeoNetworking address of the TestSystem

#   latitude               : latitude of the TestSystem

#   longitude              : longitude of the TestSystem

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

# Ethernet layer

#   Source MAC address: mac_src

#   Broadcast address : mac_bc

#   Ethernet type     : eth_type

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

# Pcap layer

#   Pcap filter: filter

#   Online mode:

#     Local NIC: nic

#                If set, online mode is used

#   Offline mode (nic is present but not set):

#     File to read    : file

#     Frame offset    : frame_offset

#     Time offset     : time_offset

#     Save sent packet: save_mode=[0|1]



# Single GeoNetworking component port

system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=/home/ubuntu/tmp/TC_GEONW_PON_BEA_TI_02.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_beacon.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"



# Multiple GeoNetworking component port

Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"

Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"



# BTP port

system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"



# CAM port

system.camPort.params := "CAM/BTP(type=btpA,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"



# DENM port

system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_denm.pcap,filter=ether proto 0x8947,frame_offset=0)"



# UpperTester port based on UDP

system.utPort.params := "UT/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=udp port 12346)"



[EXECUTE]

# GeoNetworking Req

#TestCodec_GeoNetworking.tc_GeoNetReq_AnycastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_BroadcastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_BeaconPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_LsRequestPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_LsReplyPacket

# GeoNetworking Ind

#TestCodec_GeoNetworking.tc_GeoNetInd_AnycastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BroadcastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket

# GeoNetworking Port

#TestCodec_GeoNetworking.tc_GeoNet_Port

#TestCodec_GeoNetworking.tc_GeoNet_Port_utPort

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_1

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_2

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_1

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_2

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_1

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_2

#TestCodec_GeoNetworking.tc_GeoNet_MultiPort

#GeoNetworking UpperTester

#TestCodec_GeoNetworking.tc_GeoNet_UtGnInitialize

#TestCodec_GeoNetworking.tc_GeoNet_UtGnChangePosition

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_2



# Btp PDU

#TestCodec_Btp.tc_Btp_A_Without_Payload

#TestCodec_Btp.tc_Btp_A

#TestCodec_Btp.tc_Btp_B

#TestCodec_Btp.tc_BtpReq_A

# Btp Port

#TestCodec_Btp.tc_Btp_Port



# CAM PDU

#TestCodec_CAM.tc_CamReq

#TestCodec_CAM.tc_CamInd

TestCodec_CAM.tc_Cam_Port

# CAM UpperTester

#TestCodec_CAM.tc_Cam_UtCamInitialize

#TestCodec_CAM.tc_Cam_UtCamChangePosition

#TestCodec_CAM.tc_Cam_UtCamChangeCurvature

#TestCodec_CAM.tc_Cam_UtCamChangeSpeed

#TestCodec_CAM.tc_Cam_UtCamSetAccelerationControlStatus

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_lowBeamHeadlightsOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_leftTurnSignalOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_daytimeRunningLightsOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_parkingLightsOn

#TestCodec_CAM.tc_Cam_UtCamChangeHeading

#TestCodec_CAM.tc_Cam_UtCamSetDriveDirection

#TestCodec_CAM.tc_Cam_UtCamChangeYawRate

#TestCodec_CAM.tc_Cam_UtCamChangeYawRate_negative

#TestCodec_CAM.tc_Cam_UtCamSetStationType

#TestCodec_CAM.tc_Cam_UtCamSetVehicleRole

#TestCodec_CAM.tc_Cam_UtCamSetDangerousGoods

#TestCodec_CAM.tc_Cam_UtCamSetLightBarSirene

#TestCodec_CAM.tc_Denm_UtCamTriggerResult

#TestCodec_CAM.tc_Cam_UtCamEventInd_1

#TestCodec_CAM.tc_Cam_UtCamEventInd_2



# DENM PDU

#TestCodec_DENM.tc_DenmReq

#TestCodec_DENM.tc_DenmInd

TestCodec_DENM.tc_Denm_Port

#TestCodec_DENM.tc_Denm_Port_utPort

# DENM UpperTester

#TestCodec_DENM.tc_Denm_UtDenmInitialize

#TestCodec_DENM.tc_Denm_UtDenmChangePosition

#TestCodec_DENM.tc_Denm_UtDenmChangePseudonym

#TestCodec_DENM.tc_Denm_UtDenmTrigger_1

#TestCodec_DENM.tc_Denm_UtDenmTrigger_2

#TestCodec_DENM.tc_Denm_UtDenmUpdate_1

#TestCodec_DENM.tc_Denm_UtDenmTriggerResult

#TestCodec_DENM.tc_Denm_UtDenmUpdateResult

#TestCodec_DENM.tc_Denm_UtDenmEventInd_1

#TestCodec_DENM.tc_Denm_UtDenmEventInd_2



[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

KillTimer := 10.0

TCPPort := 0

LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1

etc/TestCodec/ITSTS.cfg

0 → 100644
+177 −0

File added.

Preview size limit exceeded, changes collapsed.