Newer
Older
# Copyright (c) ETSI 2017.
# https://forge.etsi.org/etsi-forge-copyright-notice.txt
definitions:
Link:
description: >
This type represents a link to a resource using an absolute URI.
type: object
required:
- href
properties:
href:
description: >
URI of another resource referenced from a resource.
Shall be an absolute URI (i.e. a UTI that contains {apiRoot}).
$ref: "#/definitions/Uri"
NotificationLink:
description: >
This type represents a link to a resource in a notification, using an absolute or relative URI.
type: object
required:
- href
properties:
href:
description: >
URI of a resource referenced from a notification.
Should be an absolute URI (i.e. a URI that contains
{apiRoot}), however, may be a relative URI (i.e. a URI
where the {apiRoot} part is omitted) if the {apiRoot}
information is not available.
$ref: "#/definitions/Uri"
KeyValuePairs:
description: >
This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON,
a set of keyvalue pairs is represented as an object. It shall comply with the provisions defined in clause 4
of IETF RFC 8259. In the following example, a list of key-value pairs with four keys ("aString", "aNumber",
"anArray" and "anObject") is provided to illustrate that the values associated with different keys can be of
different type.
type: object
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
ApiVersionInformation:
description: >
This type represents API version information.
type: object
required:
- uriPrefix
- apiVersions
properties:
uriPrefix:
description: >
Specifies the URI prefix for the API, in the following
form {apiRoot}/{apiName}/{apiMajorVersion}/.
type: string
apiVersions:
description: >
Version(s) supported for the API signaled by the
uriPrefix attribute.
type: array
items:
type: object
required:
- version
properties:
version:
description: >
Identifies a supported version. The value of the
version attribute shall be a version identifier as
specified in clause 9.1 (SOL013).
type: string
isDeprecated:
description: >
If such information is available, this attribute indicates
whether use of the version signaled by the version
attribute is deprecated (true) or not (false).
A deprecated version is still supported by the API producer but is recommended
not to be used any longer.
When a version is no longer supported, it does not appear in the response body.
type: boolean
retirementDate:
description: >
The date and time after which the API version will no
longer be supported.
This attribute may be included if the value of the
isDeprecated attribute is set to true and shall be
absent otherwise.
$ref: "#/definitions/DateTime"
VnfInstanceSubscriptionFilter:
description: >
This type represents subscription filter criteria to match VNF
instances.
* NOTE 1: The attributes "vnfdIds" and "vnfProductsFromProviders" are alternatives to reference to VNF instances
that are based on certain VNFDs in a filter. They should not be used both in the same filter instance,
but one alternative should be chosen.
NOTE 2: The attributes "vnfInstanceIds" and "vnfInstanceNames" are alternatives to reference to particular VNF
instances in a filter. They should not be used both in the same filter instance, but one alternative
should be chosen.
type: object
anyOf:
- oneOf:
- required:
- vnfdId
- required:
- vnfProductsFromProviders
- oneOf:
- required:
- vnfInstanceIds
- required:
- vnfInstanceNames
properties:
vnfdIds:
description: >
If present, match VNF instances that were created based on a VNFD
identified by one of the vnfdId values listed in this attribute. See note 1.
type: array
items:
$ref: "#/definitions/Identifier"
vnfProductsFromProviders:
description: >
If present, match VNF instances that belong to VNF products from
certain providers. See note 1.
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
type: array
items:
type: object
required:
- vnfProvider
properties:
vnfProvider:
description: >
Name of the VNF provider to match.
type: string
vnfProducts:
description: >
If present, match VNF instances that belong to VNF products
with certain product names, from one particular provider.
type: array
items:
type: object
required:
- vnfProductName
properties:
vnfProductName:
description: >
Name of the VNF product to match.
type: string
versions:
description: >
If present, match VNF instances that belong to VNF
products with certain versions and a certain product
name, from one particular provider.
type: array
items:
type: object
required:
- vnfSoftwareVersion
properties:
vnfSoftwareVersion:
description: >
Software version to match.
$ref: "#/definitions/Version"
vnfdVersions:
description: >
If present, match VNF instances that belong to VNF
products with certain VNFD versions, a certain
software version and a certain product name, from
one particular provider.
type: array
items:
$ref: "#/definitions/Version"
vnfInstanceIds:
description: >
If present, match VNF instances with an instance identifier listed
in this attribute. See note 2.
type: array
items:
$ref: "#/definitions/Identifier"
vnfInstanceNames:
description: >
If present, match VNF instances with a VNF Instance Name listed in
this attribute. See note 2.
type: array
items:
type: string
ResourceHandle:
required:
- resourceId
type: object
description: >
This type represents the information that allows addressing a virtualised resource that is used by a VNF instance.
Information about the resource is available from the VIM.
* NOTE 1: The information about the VIM or CISM connection referenced by the VIM connection id is known to the
VNFM. Moreover, the identifier of the VIM connection provides scope to the resourceId.
* NOTE 2: The value set of the "vimLevelResourceType" attribute is within the scope of the VIM or CISM or the resource
provider and can be used as information that complements the ResourceHandle. When the container
infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would
correspond to the 'kind' field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod,
PersistentVolumeClaim, NetworkAttachmentDefinition.
* NOTE 3: When the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the
following way:
- For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide
- For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim,
i.e. the value of the 'claimName' field in the Kubernetes® manifest, or a compound name built by
Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own
- For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of
the 'metadata.name' field in Kubernetes® manifest.
properties:
vimConnectionId:
description: >
Identifier of the VIM or CISM connection to manage the resource.
This attribute shall be supported when the resource is managed by a CISM.
When the resource is managed by a VIM, this attribute shall only be supported and present if VNF-related
resource management in direct mode is applicable.
$ref: "#/definitions/Identifier"
resourceProviderId:
description: >
Identifier of the entity responsible for the management of the
resource. This attribute shall only be supported and present when
VNF-related resource management in indirect mode is applicable. The
identification scheme is outside the scope of the present document.
$ref: "#/definitions/Identifier"
resourceId:
description: >
Identifier of the resource in the scope of the VIM or the
CISM or the resource provider. See note 3.
$ref: "#/definitions/IdentifierInVim"
vimLevelResourceType:
description: >
Type of the resource in the scope of the VIM or the CISM
or the resource provider. See note 2.
type: string
vimLevelAdditionalResourceInfo:
Additional resource information which is specific to this
resource and its type, and which is available from the
VIM or the CISM or the resource provider.
$ref: "#/definitions/AdditionalResourceInfo"
containerNamespace:
description: >
The value of the namespace in which the MCIO
corresponding to the resource is deployed.
This attribute shall be present if the resource is managed
by a CISM and it shall be absent otherwise.
type: string
VnfExtCpData:
description: >
This type represents configuration information for external CPs created.
* NOTE 1: In case this identifier refers to a CPD with trunking enabled, the external CP instances created
from this CPD will represent ports in a trunk.
* NOTE 2: Within one VNF instance, all VNFC instances created from a particular VDU have the same external
connectivity. Thus, given a particular value of the "cpdId" attribute, there shall be one
"cpConfig" entry for each VNFC instance that has been or can be created from a VDU which includes
a CPD identified by the "cpdId" attribute. If the cpConfig represents a subport in a trunk,
all "cpConfig" entries in this list shall have the same segmentationId, which means they are
connected to the same set of external VLs via the trunk.
* NOTE 3: The map entry value shall be set to "null" in order to delete a "VnfExtCpConfig" entry identified
by a particular key value from the map, i.e. for the disconnection of an existing external
CP instance addressed by cpInstanceId in the deleted map entry from a particular external
virtual link, and deletion of that instance in case it represents a subport. Deleting the
last key from the map removes the affected instance of the "VnfExtCpData" structure from
its parent data structure.
* NOTE 4: If, as defined by the input parameters of a "ChangeVnfFlavour", "ChangeExtVnfConnectivity" or
"ChangeCurrentVnfPkg" operation, a cpConfig map entry identified by a particular map key value
is moved into another "ExtVirtualLinkData" or "VnfExtCpData" structure, this particular cpConfig
map entry may be used by an external CP instance different than the one that has used it before the
operation, or by no external CP instance at all. Renaming a CPD identifier during the "changeCurrentVnfPkg"
operation does not count as moving the related "cpConfig" map entries to a new "extCpData" structure.
type: object
required:
- cpdId
properties:
cpdId:
description: >
The identifier of the CPD in the VNFD. See note 1.
$ref: "#/definitions/IdentifierInVnfd"
cpConfig:
description: >
Map of instance data that need to be configured on the CP instances
created from the respective CPD.
The key of the map which identifies the individual VnfExtCpConfig entries is of type "IdentifierInVnf"
The entries shall be applied by the VNFM according to the rules of JSON Merge Patch (see IETF RFC 7396).
See notes 2, 3 and 4.
type: object
additionalProperties:
$ref: "#/definitions/VnfExtCpConfig"
VnfExtCpConfig:
description: >
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
This type represents an externally provided link port, or a network attachment definition resource of secondary
container cluster network, or network address information per instance of an external connection point.
In the case of VM-based deployment of the VNFC exposing the external CP:
1. In case a link port is provided, the VNFM shall use that link port when connecting the external CP to the
external VL.
2. In case a link port is not provided, the VNFM shall create a link port on the external VL and use that link port
to connect the external CP to the external VL.
In the case of container-based deployment of the VNFC exposing the external CP, the VNFM shall use the network
attachment definition resource of secondary container cluster network when connecting the CP to the external VL.
* NOTE 1: The following conditions apply to the attributes "linkPortId" and "cpProtocolData" for an external CP
instance connected or to be connected to a virtual network not categorized as secondary container cluster network:
1) Void.
2) At least one of the "linkPortId" and "cpProtocolData" attributes shall be present for an external CP instance
representing a subport that is to be created, or an external CP instance that is to be created by creating the
corresponding VNFC or VNF instance during the current or a subsequent LCM operation, or for an existing
external CP instance that is to be re-configured or added to a particular external virtual link.
3) If the "linkPortId" attribute is absent, the VNFM shall create a link port.
4) If the "cpProtocolData" attribute is absent, the "linkPortId" attribute shall be provided referencing a
precreated link port, and the VNFM can use means outside the scope of the present document to obtain the
pre-configured address information for the connection point from the resource representing the link port.
5) If both "cpProtocolData" and "linkportId" are provided, the NFVO shall ensure that the
cpProtocolData can be used with the pre-created link port referenced by "linkPortId".
* NOTE 2: The following conditions apply to the attributes “netAttDefResourceId” and “cpProtocolData” for an external CP
instance connected or to be connected to a secondary container cluster network:
2) The "netAttDefResourceId" attribute shall be present and the "cpProtocolData" attribute may be present for
a to-be-created external CP instance or an existing external CP instance.
* NOTE 3: Cardinality greater than 1 is only applicable for specific cases where more than one network attachment
definition resource is needed to fulfil the connectivity requirements of the external CP, e.g. to build a link
redundant mated pair in SR-IOV cases. When more than one netAttDefResourceId is indicated, all shall belong
to the same namespace as defined by the corresponding "containerNamespace" attribute in the "resourceHandle" attribute
in the "NetAttDefResourceData".
* NOTE 4: Either linkPortId or netAttDefResourceId may be included, but not both.
anyOf:
- required:
- linkPortId
- required:
- cpProtocolData
- required:
- netAttDefResourceId
type: object
properties:
parentCpConfigId:
description: >
Value of the key that identifies the "VnfExtCpConfig" map entry which corresponds to the parent port of the
trunk. Reference to the "VnfExtCpConfig" entry that corresponds to the parent port of the trunk. Only present
in "VnfExtCpConfig" structures that provide configuration information for a CP which represents a sub-port in
a trunk, and if parent ports are supported.
$ref: "#/definitions/IdentifierInVnf"
linkPortId:
description: >
Identifier of a pre-configured link port to which the external CP
will be associated. See notes 1 and 4.
$ref: "#/definitions/Identifier"
createExtLinkPort:
description: >
Indicates to the VNFM the need to create a dedicated link port for the external CP.
If set to True, the VNFM shall create a link port.
If set to False, the VNFM shall not create a link port.
This attribute is only applicable for external CP instances without a floating IP address that expose a VIP CP
instance for which a dedicated IP address is allocated. It shall be present in that case and shall be absent otherwise.
type: boolean
cpProtocolData:
description: >
Parameters for configuring the network protocols on the
link port that connects the CP to a VL. See notes 1 and 2.
type: array
items:
$ref: "#/definitions/CpProtocolData"
netAttDefResourceId:
description: >
Identifier of the “NetAttDefResourceData” structure that
provides the specification of the interface to attach the
external CP to a secondary container cluster network.
It is only applicable if the external CP is connected or to
be connected to a secondary container cluster network. It
shall not be present if the external CP is related to a
virtual network not categorized as secondary container
cluster network.
See notes 2, 3 and 4.
type: array
items:
$ref: "#/definitions/Identifier"
CpProtocolData:
description: >
This type represents network protocol data.
* NOTE: This attribute allows to signal the addition of further types of layer and protocol
in future versions of the present document in a backwards-compatible way. In the current
version of the present document, only IP over Ethernet is supported.
layerProtocol:
description: >
Identifier of layer(s) and protocol(s).
Permitted values:
- IP_OVER_ETHERNET.
- IP_FOR_VIRTUAL_CP
See note
ipOverEthernet:
description: >
Network address data for IP over Ethernet to assign to the external CP
instance. Shall be present if layerProtocol is equal to
"IP_OVER_ETHERNET", and shall be absent otherwise.
$ref: "#/definitions/IpOverEthernetAddressData"
virtualCpAddress:
description: >
IP address data to assign to an external CP
instance exposing a virtual CP. It shall be
present if layerProtocol is equal to
“IP_FOR_VIRTUAL_CP” and the external CP
instance exposes a virtual CP and shall not be
present otherwise.
$ref: "#/definitions/VirtualCpAddressData"
IpOverEthernetAddressData:
description: >
This type represents network address data for IP over Ethernet.
* NOTE 1: At least one of "macAddress" or "ipAddresses" shall be present.
* NOTE 2: Exactly one of "fixedAddresses", "numDynamicAddresses" or "ipAddressRange" shall be present.
* NOTE 3: If the CP instance represents a subport in a trunk, segmentationId shall be present.
Otherwise it shall not be present.
* NOTE 4: Depending on the NFVI networking infrastructure, the segmentationId may indicate the actual
network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header
of the packets or it may be an identifier used between the application and the NFVI networking
infrastructure to identify the network sub-interface of the trunk port in question. In the latter
case the NFVI infrastructure will map this local segmentationId to whatever segmentationId is
actually used by the NFVI's transport technology.
type: object
anyOf:
- required:
- macAddress
- required:
- ipAddresses
properties:
macAddress:
description: >
MAC address. If this attribute is not present, it shall be chosen by
$ref: "#/definitions/MacAddress"
segmentationType:
description: >
Specifies the encapsulation type for the traffics coming in and out of the trunk subport.
Permitted values:
- VLAN: the subport uses VLAN as encapsulation type.
- INHERIT: the subport gets its segmentation type from the network it’s connected to.
This attribute may be present for CP instances that represent subports in a trunk and shall be
absent otherwise. If this attribute is not present for a subport CP instance, default value VLAN shall be used.
type: string
enum:
- VLAN
- INHERIT
segmentationId:
description: >
Identification of the network segment to which the CP instance connects to. See note 3 and note 4.
ipAddresses:
description: >
List of IP addresses to assign to the CP instance. Each entry
represents IP address data for fixed or dynamic IP address
assignment per subnet.
If this attribute is not present, no IP address shall be assigned. See note 1.
type: array
items:
type: object
required:
- type
oneOf:
- required:
- fixedAddresses
- required:
- numDynamicAddresses
- required:
properties:
type:
description: >
The type of the IP addresses.
Permitted values: IPV4, IPV6.
type: string
enum:
- IPV4
- IPV6
fixedAddresses:
description: >
Fixed addresses to assign (from the subnet defined by
"subnetId" if provided). See note 2.
type: array
items:
$ref: "#/definitions/IpAddress"
numDynamicAddresses:
description: >
Number of dynamic addresses to assign (from the subnet defined
by "subnetId" if provided). See note 2.
type: integer
addressRange:
description: >
An IP address range to be used, e.g. in case of egress
connections.
In case this attribute is present, IP addresses from the range
will be used. See note 2.
type: object
required:
- minAddress
- maxAddress
properties:
minAddress:
description: >
Lowest IP address belonging to the range.
$ref: "#/definitions/IpAddress"
maxAddress:
description: >
Highest IP address belonging to the range.
$ref: "#/definitions/IpAddress"
subnetId:
description: >
Subnet defined by the identifier of the subnet resource in the
VIM.
In case this attribute is present, IP addresses from that
subnet will be assigned; otherwise, IP addresses not bound to
a subnet will be assigned.
$ref: "#/definitions/IdentifierInVim"
VirtualCpAddressData:
description: >
This type represents network address data for a virtual CP.
* NOTE 1: If the container cluster is set up to be able to configure an external load balancer this address will be used,
otherwise it will be ignored by the CISM.
* NOTE 2: In case the cluster can configure an external load balancer but no loadBalancerIp is provided the container
cluster will assign an IP address.
* NOTE 3: The attribute is only relevant if the virtual CP is instantiated in a cluster that supports configuration of IP
address pools for virtual CPs. Otherwise it shall be ignored. MetalLB is an example of a solution for
Kubernetes® that supports configuration of address pools for load balancer services.
* NOTE 4: The loadBalancerIp and the addressPoolName attributes shall not be present at the same time.
type: object
required:
- type
properties:
type:
description: >
The type of the IP addresses.
Permitted values: IPV4, IPV6.
type: string
enum:
- IPV4
- IPV6
loadBalancerIp:
Fixed address to assign to an external load balancer.
addressPoolName :
description: >
Name of an address pool from which the container
cluster will assign an IP address to the virtual CP. See
notes 3 and 4.
ExtVirtualLinkData:
This type represents an external VL.
* NOTE 1: The information about the VIM connection referenced by the VIM connection id is known to the VNFM.
Moreover, the identifier of the VIM connection provides scope to the resourceId.
* NOTE 2: A link port is not needed for an external CP instance that exposes a VIP CP in the following cases:
1) For a VIP CP directly exposed as an external CP:
1.1) No dedicated IP address is allocated as VIP address, as indicated in the VNFD.
1.2) A dedicated IP address is allocated as VIP address, but the NFVO indicates that no port is needed
(createExtLinkPort in VnfExtCpConfig set to false).
2) For a VIP CP exposed as an external CP via a floating IP address:
2.1) No dedicated IP address is allocated as VIP address, as indicated in the VNFD, and the VNFC CP
associated to the VIP CP is also exposed via a floating IP address.
3) For a VIRTUAL CP exposed as an external CP.
4) For a VNFC CP exposed as an external CP in a secondary container cluster external network.
* NOTE 3: An example of the network attachment definition resource when the container infrastructure service
management is a Kubernetes® instance is a network attachment definition (NAD).
- resourceId
- extCps
The identifier of the external VL instance. The identifier is
assigned by the NFV-MANO entity that manages this VL instance.
$ref: "#/definitions/Identifier"
vimConnectionId:
Identifier of the VIM connection to manage this resource. This
attribute shall only be supported and present if VNF-related
resource management in direct mode is applicable. See note 1.
$ref: "#/definitions/Identifier"
resourceProviderId:
description: >
Identifies the entity responsible for the management of this
resource. This attribute shall only be supported and present
if VNF-related resource management in indirect mode is applicable.
The identification scheme is outside the scope of the present
document.
$ref: "#/definitions/Identifier"
resourceId:
description: >
The identifier of the resource in the scope of the VIM or the
resource provider.
$ref: "#/definitions/IdentifierInVim"
extCps:
description: >
External CPs of the VNF to be connected to this external VL. Entries in the list of external
CP data that are unchanged need not be supplied if the ExtVirtualLinkData structure is part
of a request or response that modifies the external connectivity.
type: array
items:
$ref: "#/definitions/VnfExtCpData"
extLinkPorts:
description: >
Externally provided link ports to be used to connect
external connection points to this external VL. If this
attribute is not present, the VNFM shall create the link
ports on the external VL except in the cases defined
type: array
items:
$ref: "#/definitions/ExtLinkPortData"
Externally provided network attachment definition
resource(s) that provide the specification of the interface
to attach external CPs to this external VL. See note 3.
It is only applicable if the external VL is realized by a
secondary container cluster network. It shall not be
present otherwise.
type: array
items:
$ref: "#/definitions/NetAttDefResourceData"
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
ScaleInfo:
description: >
This type represents the scale level of a VNF instance related to a scaling aspect.
type: object
required:
- aspectId
- scaleLevel
properties:
aspectId:
description: >
Identifier of the scaling aspect.
$ref: "#/definitions/IdentifierInVnfd"
vnfdId:
description: >
Identifier of the VNFD.
Shall be present in case the value differs from the vnfdId
attribute of the VnfInstance (e.g. during a "Change
current VNF package" operation or due to its final
failure).
$ref: "#/definitions/IdentifierInVnfd"
scaleToLevel:
description: >
Indicates the scale level. The minimum value shall be 0
and the maximum value shall be ≤ maxScaleLevel as
described in the VNFD.
$ref: "#/definitions/Identifier"
AdditionalResourceInfo:
description: >
This type represents additional resource information which resource and resource type
specific, and which is available from the VIM or the CISM or the resource provider.
* NOTE: At least one attribute shall be present.
type: object
properties:
hostName:
description: >
Name of the host where the resource is allocated. It shall
be present for compute resources in the scope of the
CISM and shall be absent otherwise. See note.
type: string
persistentVolume:
description: >
Name of the persistent volume to which the persistent
volume claim representing the storage resource is bound.
It may be present for storage resources in the scope of
the CISM and shall be absent otherwise. See note.
type: string
additionalInfo:
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
description: >
Information related to other properties directly owned by
the resource and available from the VIM or CISM or the
resource provider. See note.
$ref: "#/definitions/KeyValuePairs"
NetAttDefResourceData:
description: >
This type represents a network attachment definition resource that provides the specification of
the interface to be used to connect one or multiple connection points to a secondary container
cluster network realizing a VL.
type: object
required:
- netAttDefResourceId
- resourceHandle
properties:
netAttDefResourceId:
description: >
Identifier of this network attachment definition resource
as provided by the entity that has created it.
$ref: "#/definitions/Identifier"
resourceHandle:
description: >
Resource handle of the resource identifying the network
attachment definition resource that provides the
specification of the interface to attach the connection
points to a secondary container cluster network.
$ref: "#/definitions/ResourceHandle"
Identifier:
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
An identifier with the intention of being globally unique.
type: string
DateTime:
description: >
Date-time stamp.
Representation: String formatted according to IETF RFC 3339.
type: string
format: date-time
Uri:
description: >
String formatted according to IETF RFC 3986.
type: string
Boolean:
description: >
The Boolean is a data type having two values (true and false).
type: boolean
MacAddress:
description: >
A MAC address. Representation: string that consists of groups of two hexadecimal digits,
separated by hyphens or colons.
type: string
format: MAC
IpAddress:
description: >
An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal
integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that
consists of groups of zero to four hexadecimal digits, separated by colons.
type: string
format: IP
Version:
description: >
A version.
type: string
String:
description: >
A string defined in IETF RFC 8259.
type: string
Number:
description: >
A number defined in IETF RFC 8259.
type: number
UnsignedInt:
description: >
Unsigned integer number
type: integer
minimum: 0
IdentifierInVnfd:
description: >
An identifier that is unique within a VNF descriptor.
type: string
IdentifierInVim:
description: >
An identifier maintained by the VIM or the CISM or other resource provider. It is
expected to be unique within the VIM instance.
type: string
IdentifierInVnf:
description: >
An identifier that is unique for the respective type within a VNF
instance, but may not be globally unique.
type: string
IdentifierLocal:
description: >
An identifier that is unique within a limited local scope other than above listed identifiers,
such as within a complex data structure or within a request-response pair.
Representation: string of variable length.
type: string
Checksum: #no definition found
description: >
Cheksum description
type: string
########################################################################################################################
# TO CHECK IF INCLUDE THESE DATA TYPES IN ANOTHER DEF FILES
VnfLinkPortData:
description: >
This type represents an externally provided link port to be used to connect a VNFC connection point
to an exernally managed VL.
type: object
required:
- vnfLinkPortId
- resourceHandle
properties:
vnfLinkPortId:
description: >
Identifier of this link port as provided by the entity that has created the link port.
$ref: "#/definitions/Identifier"
resourceHandle:
description: >
Resource handle of the virtualised resource that realizes the link port.
$ref: "#/definitions/ResourceHandle"
ExtLinkPortData:
description: >
This type represents an externally provided link port to be used to
connect an external connection point to an external VL.
* NOTE: The value of "trunkResourceId" is scoped by the value of "vimConnectionId" in the "resourceHandle" attribute.
type: object
required:
- id
- resourceHandle
properties:
id:
Identifier of this link port as provided by the entity that has
created the link port.
$ref: "#/definitions/Identifier"
resourceHandle:
Reference to the virtualised resource realizing this link port.
$ref: "#/definitions/ResourceHandle"
trunkResourceId:
description: >
Identifier of the trunk resource in the VIM.
Shall be present if the present link port corresponds to the parent
port that the trunk resource is associated with. See note.
$ref: "#/definitions/IdentifierInVim"
GrantedLcmOperationType:
description: >
The enumeration GrantedLcmOperationType defines the permitted values
to represent VNF lifecycle operation types in grant requests.
Value | Description
------|------------
INSTANTIATE | Represents the "Instantiate VNF" LCM operation.
SCALE | Represents the "Scale VNF" LCM operation.
SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation.
CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation.
TERMINATE | Represents the "Terminate VNF" LCM operation.
HEAL | Represents the "Heal VNF" LCM operation.
OPERATE | Represents the "Operate VNF" LCM operation.
CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation.
CHANGE_VNFPKG | Represents the "Change current VNF package" LCM operation.
CREATE_SNAPSHOT | Represents the "Create VNF snapshot" LCM operation.
REVERT_TO_SNAPSHOT | Represents the "Revert to VNF snapshot" LCM operation.
type: string
enum:
- INSTANTIATE
- SCALE
- SCALE_TO_LEVEL
- CHANGE_FLAVOUR
- TERMINATE
- HEAL
- OPERATE
- CHANGE_EXT_CONN
- CHANGE_VNFPKG
- CREATE_SNAPSHOT
- REVERT_TO_SNAPSHOT
LcmOperationType:
description: >
The enumeration LcmOpType defines the permitted values to represent
VNF lifecycle operation types in VNF lifecycle management operation
occurrence resources and VNF lifecycle management operation occurrence
Value | Description
------|------------
INSTANTIATE | Represents the "Instantiate VNF" LCM operation.
SCALE | Represents the "Scale VNF" LCM operation.
SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation.
CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation.
TERMINATE | Represents the "Terminate VNF" LCM operation.
HEAL | Represents the "Heal VNF" LCM operation.
OPERATE | Represents the "Operate VNF" LCM operation.
CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation.
MODIFY_INFO | Represents the "Modify VNF Information" LCM operation.
CREATE_SNAPSHOT | Represents the "Create VNF Snapshot" LCM operation.
REVERT_TO_SNAPSHOT | Represents the “Revert-To VNF Snapshot" LCM operation.
CHANGE_VNFPKG | Represents the "Change current VNF package" LCM operation.
type: string
enum:
- INSTANTIATE
- SCALE
- SCALE_TO_LEVEL
- CHANGE_FLAVOUR
- TERMINATE
- HEAL
- OPERATE
- CHANGE_EXT_CONN
- CREATE_SNAPSHOT
- REVERT_TO_SNAPSHOT
- CHANGE_VNFPKG
ProblemDetails:
#SOL003 location: 4.3.5.3
description: >
The definition of the general "ProblemDetails" data structure from
IETF RFC 7807 is reproduced inthis structure. Compared to the
general framework defined in IETF RFC 7807, the "status" and
"detail" attributes are mandated to be included by the present document,
to ensure that the response contains additional textual information about
an error. IETF RFC 7807 foresees extensibility of the
"ProblemDetails" type. It is possible that particular APIs in the present
document, or particular implementations, define extensions to define
additional attributes that provide more information about the error.
The description column only provides some explanation of the meaning to
Facilitate understanding of the design. For a full description, see
type: object
required:
- status
- detail
properties:
type:
description: >
A URI reference according to IETF RFC 3986 that identifies the
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
problem type. It is encouraged that the URI provides human-readable
documentation for the problem (e.g. using HTML) when dereferenced.
When this member is not present, its value is assumed to be
"about:blank".
type: string
format: URI
title:
description: >
A short, human-readable summary of the problem type. It should not
change from occurrence to occurrence of the problem, except for
purposes of localization. If type is given and other than
"about:blank", this attribute shall also be provided.
A short, human-readable summary of the problem
type. It SHOULD NOT change from occurrence to occurrence of the
problem, except for purposes of localization (e.g., using
proactive content negotiation; see [RFC7231], Section 3.4).
type: string
status:
description: >
The HTTP status code for this occurrence of the problem.
The HTTP status code ([RFC7231], Section 6) generated by the origin
server for this occurrence of the problem.
type: integer
detail:
description: >
A human-readable explanation specific to this occurrence of the
problem.
type: string
instance:
description: >
A URI reference that identifies the specific occurrence of the
problem. It may yield further information if dereferenced.
type: string
format: URI
#TODO: How to express "any additional attributes"?
description: >
* NOTE: The clientId and clientPassword passed in a subscription shall not be the same as the clientId and
clientPassword that are used to obtain authorization for API requests. Client credentials may differ between
subscriptions. The value of clientPassword should be generated by a random process