SOL003VNFLifecycleManagement_def.yaml

# Copyright (c) ETSI 2017.
# https://forge.etsi.org/etsi-forge-copyright-notice.txt

definitions:
  InstantiateVnfRequest:
    #SOL003 location: 5.5.2.4
    type: object
    required:
      - flavourId
    properties:
      flavourId:
        description: >
          Identifier of the VNF deployment flavour to be instantiated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      instantiationLevelId:
        description: >
          Identifier of the instantiation level of the deployment flavour to be
          instantiated. If not present, the default instantiation level as
          declared in the VNFD is instantiated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      extVirtualLinks:
        description: >
          Information about external VLs to connect the VNF to.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtVirtualLinkData"
      extManagedVirtualLinks:
        description: >
          Information about internal VLs that are managed by the NFVO.

          NOTES: 
          The indication of externally-managed internal VLs is needed in case networks have been pre-configured 
          for use with certain VNFs, for instance to ensure that these networks have certain properties such as 
          security or acceleration features, or to address particular network topologies. The present document 
          assumes that externally-managed internal VLs are managed by the NFVO and created towards the VIM.

          It is possible to have several ExtManagedVirtualLinkData for the same VNF internal VL in case of a 
          multi-site VNF spanning several VIMs. The set of ExtManagedVirtualLinkData corresponding to the same 
          VNF internal VL shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed 
          multi-site VL instance (refer to clause 4.4.1.12).
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtManagedVirtualLinkData"
      vimConnectionInfo:
        description: >
          Information about VIM connections to be used for managing the resources for the VNF instance, or refer to
          external / externally-managed virtual links. This attribute shall only be supported and may be present if 
          VNF-related resource management in direct mode is applicable. The VNFM shall apply the content of this 
          attribute to the "vimConnectionInfo" attribute of "VnfInstance" according to the rules of JSON Merge Patch 
          (see IETF RFC 7396).
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"

      localizationLanguage:
        description: >
          Localization language of the VNF to be instantiated. The value shall
          comply with the format defined in IETF RFC 5646.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      additionalParams:
        description: >
          Additional input parameters for the instantiation process, specific
          to the VNF being instantiated, as declared in the VNFD as part of
          "InstantiateVnfOpConfig".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          If present, this attribute provides modifications to the default values, 
          as obtained from the VNFD, of the "extensions" attribute in "VnfInstance", 
          as defined in clause 5.5.2.2. Provisions for handling extensions during the
          operation are defined in clause 5.4.4.3.1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      vnfConfigurableProperties:
        description: >
          If present, this attribute provides modifications to the default values, as obtained from the VNFD, of 
          the "vnfConfigurableProperties" attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for 
          handling configurable properties during the operation are defined in clause 5.4.4.3.1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  ChangeVnfFlavourRequest:
    #SOL003 location: 5.5.2.7
    description: >
      This type represents request parameters for the "Change VNF flavour" operation.
    type: object
    required:
      - newFlavourId
    properties:
      newFlavourId:
        description: >
          Identifier of the VNF deployment flavour to be instantiated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      instantiationLevelId:
        description: >
          Identifier of the instantiation level of the deployment flavour to
          be instantiated. If not present, the default instantiation level as
          declared in the VNFD is instantiated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      extVirtualLinks:
        description: >
          Information about external VLs to connect the VNF to.
          Entries in the list of external VLs that are unchanged need not be supplied as part of this request.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtVirtualLinkData"
      extManagedVirtualLinks:
        description: >
          Information about internal VLs that are managed by the NFVO.

          NOTES: 
          The indication of externally-managed internal VLs is needed in case networks have been pre-configured 
          for use with certain VNFs, for instance to ensure that these networks have certain properties such as 
          security or acceleration features, or to address particular network topologies. The present document 
          assumes that externally-managed internal VLs are managed by the NFVO and created towards the VIM.

          It is possible to have several ExtManagedVirtualLinkData for the same VNF internal VL in case of a 
          multi-site VNF spanning several VIMs. The set of ExtManagedVirtualLinkData corresponding to the same 
          VNF internal VL shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed 
          multi-site VL instance (refer to clause 4.4.1.12).
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtManagedVirtualLinkData"
      vimConnectionInfo:
        description: >
          Information about VIM connections to be used for managing the resources for the VNF instance, or refer to
          external / externally-managed virtual links. This attribute shall only be supported and may be present if 
          VNF-related resource management in direct mode is applicable. The VNFM shall apply the content of this 
          attribute to the "vimConnectionInfo" attribute of "VnfInstance" according to the rules of JSON Merge Patch 
          (see IETF RFC 7396).
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"
      additionalParams:
        description: >
          Additional input parameters for the instantiation process, specific
          to the VNF being instantiated, as declared in the VNFD as part of
          "InstantiateVnfOpConfig".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          If present, this attribute provides modifications to the values of the "extensions" 
          attribute in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling 
          extensions during the operation, are defined in clause 5.4.7.3.1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      vnfConfigurableProperties:
        description: >
          If present, this attribute provides modifications to the values of the "vnfConfigurableProperties" attribute 
          in  "VnfInstance", as defined in clause 5.5.2.2. 
          Provisions for handling VNF configurable properties during the operation, are defined in clause 5.4.7.3.1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  TerminateVnfRequest:
    type: object
    required:
      - terminationType
    properties:
      terminationType:
        description: >
          Indicates whether forceful or graceful termination is requested.
          Permitted values:
          * FORCEFUL: The VNFM will shut down the VNF and release the
            resources immediately after accepting the request.
          * GRACEFUL: The VNFM will first arrange to take the VNF out of
          service after accepting the request. Once the operation of taking
          the VNF out of service finishes (irrespective of whether it has
          succeeded or failed) or once the timer value specified in the
          "gracefulTerminationTimeout" attribute expires, the VNFM will shut
          down the VNF and release the resources.
        type: string
        enum:
          - FORCEFUL
          - GRACEFUL
      gracefulTerminationTimeout:
        description: >
          This attribute is only applicable in case of graceful termination.
          It defines the time to wait for the VNF to be taken out of service
          before shutting down the VNF and releasing the resources.
          The unit is seconds.
          If not given and the "terminationType" attribute is set to
          "GRACEFUL", it is expected that the VNFM waits for the successful
          taking out of service of the VNF, no matter how long it takes,
          before shutting down the VNF and releasing the resources.
        type: integer
      additionalParams:
        description: >
          Additional parameters passed by the NFVO as input to the termination
          process, specific to the VNF being terminated, as declared in the
          VNFD as part of "TerminateVnfOpConfig".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  HealVnfRequest:
    type: object
    properties:
      cause:
        description: >
          Indicates the reason why a healing procedure is required.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      additionalParams:
        description: >
          Additional parameters passed by the NFVO as input to the healing
          process, specific to the VNF being healed, as declared in the VNFD
          as part of "HealVnfOpConfig".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  OperateVnfRequest:
    description: >
      This type represents request parameters for the "Operate VNF" operation.
    type: object
    required:
      - changeStateTo
    properties:
      changeStateTo:
        description: >
          The desired operational state (i.e. started or stopped) to change
          the VNF to.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VnfOperationalStateType"
      stopType:
        description: >
          It signals whether forceful or graceful stop is requested.
          The “stopType” and “gracefulStopTimeout” attributes shall be absent,
          when the “changeStateTo” attribute is equal to “STARTED”. The
          “gracefulStopTimeout” attribute shall be present, when the
          “changeStateTo” is equal to “STOPPED” and the “stopType” attribute
          is equal to “GRACEFUL”. The “gracefulStopTimeout” attribute shall be
          absent, when the “changeStateTo” attribute is equal to “STOPPED” and
          the “stopType” attribute is equal to “FORCEFUL”. The request shall
          be treated as if the “stopType” attribute was set to ”FORCEFUL”, when
          the “changeStateTo” attribute is equal to “STOPPED” and the
          “stopType” attribute is absent.
        $ref: "#/definitions/StopType"
      gracefulStopTimeout:
        description: >
          The time interval (in seconds) to wait for the VNF to be taken out
          of service during graceful stop, before stopping the VNF.
          The “stopType” and “gracefulStopTimeout” attributes shall be absent,
          when the “changeStateTo” attribute is equal to “STARTED”. The
          “gracefulStopTimeout” attribute shall be present, when the
          “changeStateTo” is equal to “STOPPED” and the “stopType” attribute
          is equal to “GRACEFUL”. The “gracefulStopTimeout” attribute shall be
          absent, when the “changeStateTo” attribute is equal to “STOPPED” and
          the “stopType” attribute is equal to “FORCEFUL”. The request shall
          be treated as if the “stopType” attribute was set to ”FORCEFUL”, when
          the “changeStateTo” attribute is equal to “STOPPED” and the
          “stopType” attribute is absent.
        type: integer
      additionalParams:
        description: >
          Additional parameters passed by the NFVO as input to the process,
          specific to the VNF of which the operation status is changed, as
          declared in the VNFD as part of "OperateVnfOpConfig".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  ChangeExtVnfConnectivityRequest:
    #SOL003 location: 5.5.2.11
    description: >
      This type represents request parameters for the
      "Change external VNF connectivity" operation to modify the external
      connectivity of a VNF instance.
    type: object
    required:
      - extVirtualLinks
    properties:
      extVirtualLinks:
        description: >
          Information about external VLs to change (e.g. connect the VNF to).
          Entries in the list of external VLs that are unchanged need not be supplied as part of this request.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtVirtualLinkData"
      vimConnectionInfo:
        description: >
          Information about VIM connections to be used for managing the resources for the VNF instance, or refer to 
          external virtual links. This attribute shall only be supported and may be present if VNF-related resource 
          management in direct mode is applicable. The VNFM shall apply the content of this attribute to the 
          "vimConnectionInfo" attribute of "VnfInstance" according to the rules of JSON Merge Patch (see IETF RFC 7396).
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"
      additionalParams:
        description: >
          Additional input parameters for the instantiation process, specific
          to the VNF being instantiated, as declared in the VNFD as part of
          "ChangeExtVnfConnectivityOpConfig".".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  ChangeCurrentVnfPkgRequest:
    #SOL003 location: 5.5.2.11a
    description: >
      This type represents request parameters for the "Change current VNF package" 
      operation to replace the VNF package on which a VNF instance is based.
    type: object
    required:
      - vnfdId
    properties:
      vnfdId:
        description: >
          Identifier of the VNFD which defines the destination VNF Package for the 
          change.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      extVirtualLinks:
        description: >
          Information about external VLs to connect the VNF to. Entries in the list 
          that are unchanged need not be supplied as part of this request.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtVirtualLinkData"
      extManagedVirtualLinks:
        description: >
          Information about internal VLs that are managed by the NFVO.

          NOTES:
          The indication of externally-managed internal VLs is needed in case networks have been pre-configured for
          use with certain VNFs, for instance to ensure that these networks have certain properties such as security or
          acceleration features, or to address particular network topologies. The present document assumes that
          externally-managed internal VLs are managed by the NFVO and created towards the VIM.
          It is possible to have several ExtManagedVirtualLinkData for the same VNF internal VL in case of a multi-site
          VNF spanning several VIMs. The set of ExtManagedVirtualLinkData corresponding to the same VNF internal
          VL shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed multi-site VL
          instance (refer to clause 4.4.1.12).
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtManagedVirtualLinkData"
      vimConnectionInfo:
        description: >
          Information about VIM connections to be used for managing the resources for the VNF instance, or refer to 
          external virtual links. This attribute shall only be supported and may be present if VNF-related resource 
          management in direct mode is applicable. The VNFM shall apply the content of this attribute to the 
          "vimConnectionInfo" attribute of "VnfInstance" according to the rules of JSON Merge Patch (see IETF RFC 7396).
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"
      additionalParams:
        description: >
          Additional parameters passed by the NFVO as input to the process, specific 
          to the VNF of which the underlying VNF package is changed, as declared in 
          the VNFD as part of "ChangeCurrentVnfPkgOpConfig".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          If present, this attribute provides modifications to the values of the 
          "extensions" attribute in "VnfInstance", as defined in clause 5.5.2.2.
          Provisions for handling extensions during the operation, and needed passed 
          parameter values in case of conflicts, are defined in clause 5.4.11a.3.1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      vnfConfigurableProperties:
        description: >
          If present, this attribute provides modifications to the values of the "vnfConfigurableProperties" attribute 
          in "VnfInstance", as defined in clause 5.5.2.2. Provisions for handling VNF configurable properties during the 
          operation, and needed passed parameter values in case of conflicts, are  defined in clause 5.4.11a.3.1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  VnfInfoModificationRequest:
    description: >
      This type represents attribute modifications for an
      "Individual VNF instance" resource, i.e. modifications to a resource
      representation based on the "VnfInstance" data type.
    type: object
    properties:
      vnfInstanceName:
        description: >
          New value of the "vnfInstanceName" attribute in "VnfInstance", or
          "null" to remove the attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      vnfInstanceDescription:
        description: >
          New value of the "vnfInstanceDescription" attribute in
          "VnfInstance", or "null" to remove the attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      vnfPkgId:
        description: >
          New value of the "vnfPkgId" attribute in "VnfInstance".
          The value "null" is not permitted.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfConfigurableProperties:
        description: >
          Modifications of the "vnfConfigurableProperties" attribute in
          "VnfInstance". If present, these modifications shall be applied
          according to the rules of JSON Merge Patch (see IETF RFC 7396).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      metadata:
        description: >
          Modifications of the "metadata" attribute in "VnfInstance". If
          present, these modifications shall be applied according to the rules
          of JSON Merge Patch (see IETF RFC 7396).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          Modifications of the "extensions" attribute in "VnfInstance". If
          present, these modifications shall be applied according to the rules
          of JSON Merge Patch (see IETF RFC 7396).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      vimConnectionInfo:
        description: >
          Modifications of the "vimConnectionInfo" attribute. If present, these 
          modifications shall be applied according to the rules of 
          JSON Merge Patch (see IETF RFC 7396 ).
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"

  VnfInfoModifications:
    description: >
      This type represents attribute modifications that were performed on an
      "Individual VNF instance" resource. The attributes that can be included
      consist of those requested to be modified explicitly in the
      "VnfInfoModificationRequest" data structure, and additional attributes
      of the "VnfInstance" data structure that were modified implicitly e.g.
      when modifying the referenced VNF package.
    type: object
    properties:
      vnfInstanceName:
        description: >
          If present, this attribute signals modifications of the
          "vnfInstanceName" attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      vnfInstanceDescription:
        description: >
          If present, this attribute signals modifications of the
          "vnfInstanceDescription" attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      vnfConfigurableProperties:
        description: >
          If present, this attribute signals modifications of the
          "vnfConfigurableProperties" attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      metadata:
        description: >
          If present, this attribute signals modifications of the "metadata"
          attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          If present, this attribute signals modifications of the "extensions"
          attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      vimConnectionInfo:
        description: >
          If present, this attribute signals modifications the "vimConnectionInfo" 
          attribute array in "VnfInstance".
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"
      vnfdId:
        description: >
          If present, this attribute signals modifications of the "vnfdId"
          attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfProvider:
        description: >
          If present, this attribute signals modifications of the
          "vnfProvider" attribute in "VnfInstance".
          If present, this attribute (which depends on the value of the
          "vnfPkgId" attribute) was modified implicitly following a request to
          modify the "vnfPkgId" attribute, by copying the value of this
          attribute from the VNFD in the VNF Package identified by the
          "vnfPkgId” attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      vnfProductName:
        description: >
          If present, this attribute signals modifications of the
          "vnfProductName" attribute in "VnfInstance".
          If present, this attribute (which depends on the value of the
          "vnfPkgId" attribute) was modified implicitly following a request to
          modify the "vnfPkgId" attribute, by copying the value of this
          attribute from the VNFD in the VNF Package identified by the
          "vnfPkgId” attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/String"
      vnfSoftwareVersion:
        description: >
          If present, this attribute signals modifications of the
          "vnfSoftwareVersion" attribute in "VnfInstance".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Version"
      vnfdVersion:
        description: >
          If present, this attribute signals modifications of the
          "vnfdVersion" attribute in "VnfInstance".
          If present, this attribute (which depends on the value of the
          "vnfPkgId" attribute) was modified implicitly following a request to
          modify the "vnfPkgId" attribute, by copying the value of this
          attribute from the VNFD in the VNF Package identified by the
          "vnfPkgId” attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Version"

  StopType:
    description: >
      * FORCEFUL: The VNFM will stop the VNF instance immediately after accepting 
        the request.
      * GRACEFUL: The VNFM instance will first arrange to take the VNF out of 
        service after accepting the request. Once that operation is successful 
        or once the timer value specified in the "gracefulStopTimeout" attribute
        expires, the VNFM will stop the VNF instance.
    type: string
    enum:
      - FORCEFUL
      - GRACEFUL

  CreateVnfSnapshotRequest:
    description: >
      This type represents request parameters for the "Create VNF Snapshot" 
      LCM operation which takes a snapshot of a VNF instance and populates 
      a previously-created "Individual VNF snapshot" resource with the content 
      of the snapshot.
      It shall comply with the provisions defined in table 5.5.2.21-1.
    type: object
    required:
      - vnfSnapshotResId
    properties:
      vnfSnapshotInfoId:
        description: >
          Identifier of the "Individual VNF snapshot" resource to which the 
          VNF snapshot is to be associated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      additionalParams:
        description: >
          Additional input parameters for the snapshot creation process, specific 
          for the VNF being “snapshotted”, as declared in the VNFD as part of
          “CreateSnapshotVnfOpConfig”.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      userDefinedData:
        description: >
          User defined data for the VNF snapshot.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  CreateVnfSnapshotInfoRequest:
    description: |
      This type represents request parameters for the creation of an "Individual VNF snapshot" resource which can be
      populated with content obtained by invoking the "Create VNF snapshot" LCM operation or extracted from a
      VNF snapshot package. It shall comply with the provisions defined in table 5.5.2.20-1.
    type: object
    properties:
      vnfSnapshotPkgId:
        description: |
          Identifier of the VNF snapshot package information held by the NFVO.

          The present attribute shall be provided if the "Individual VNF snapshot" resource is requested to be created 
          as part of a VNF snapshot package extraction.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfSnapshot:
        description: |
          Information about the VNF snapshot, content and/or reference to its content.
        $ref: "#/definitions/VnfSnapshot"

  RevertToVnfSnapshotRequest:
    description: >
      This type represents request parameters for the "Revert to VNF Snapshot" operation.
    type: object
    properties:
      vnfSnapshotInfoId:
        description: >
          Identifier of the "Individual VNF snapshot" resource with the information of the VNF snapshot 
          to be reverted to.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      additionalParams:
        description: >
          Additional input parameters for the revert to VNF snapshot process, specific for the VNF being 
          “reverted”, as declared in the VNFD as part of “RevertToSnapshotVnfOpConfig”.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  VnfSnapshotInfoModificationRequest:
    description: |
      This type represents attribute modifications for an "Individual VNF snapshot" resource, i.e. modifications 
      to a resource representation based on the "VnfSnapshotInfo" data type. The attributes of "VnfSnapshotInfo" 
      that can be modified according to the provisions in clause 5.5.2.22 are included in the 
      "VnfSnapshotInfoModificationRequest" data type. The "VnfSnapshotInfoModificationRequest" data type shall 
      comply with the provisions defined in table 5.5.2.24-1.
    type: object
    properties:
      vnfSnapshotPkgId:
        description: |
          New value of the "vnfSnapshotPkgId" attribute in "VnfSnapshotInfo". 
          The value "null" is not permitted.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfSnapshot:
        description: |
          New value of the "vnfSnapshot" attribute in "VnfSnapshotInfo". 
          The value "null" is not permitted.
        $ref: "#/definitions/VnfSnapshot"

  VnfSnapshotInfoModifications:
    description: |
      This type represents attribute modifications that were performed on an "Individual VNF snapshot" 
      resource. The attributes that can be included consist of those requested to be modified explicitly 
      in the "VnfSnapshotInfoModificationRequest" data structure, and additional attributes of the 
      "VnfSnapshotInfo" data structure that were modified implicitly. The "VnfSnapshotInfoModifications" 
      data type shall comply with the provisions defined in table 5.5.2.25-1.
    type: object
    properties:
      vnfSnapshotPkgId:
        description: |
          If present, this attribute signals modifications of the "vnfSnapshotPkgId" attribute in 
          "VnfSnapshotInfo" as defined in clause 5.5.2.22.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfSnapshot:
        description: |
          If present, this attribute signals modifications of the "vnfSnapshot" attribute in 
          "VnfSnapshotInfo" as defined in clause 5.5.2.22.
        $ref: "#/definitions/VnfSnapshot"

  VnfInstance:
    description: >
      This type represents a VNF instance.
    type: object
    required:
      - id
      - vnfdId
      - vnfProvider
      - vnfProductName
      - vnfSoftwareVersion
      - vnfdVersion
      - instantiationState
    properties:
      id:
        description: >
          Identifier of the VNF instance.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfInstanceName:
        description: >
          Name of the VNF instance.
          This attribute can be modified with the PATCH method.
        type: string
      vnfInstanceDescription:
        description: >
          Human-readable description of the VNF instance.
          This attribute can be modified with the PATCH method.
        type: string
      vnfdId:
        description: >
          Identifier of the VNFD on which the VNF instance is based.

          Modifying the value of this attribute shall not be performed when conflicts
          exist between the previous and the newly referred VNF package,
          i.e. when the new VNFD is not changed with respect to the previous VNFD
          in other aspects than merely referencing to other VNF software images.
          In order to avoid misalignment of the VnfInstance with the current VNF's
          on-boarded VNF Package, the values of attributes in the VnfInstance that
          have corresponding attributes in the VNFD shall be kept in sync with the values in the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfProvider:
        description: >
          Provider of the VNF and the VNFD. The value is copied from the VNFD.
        type: string
      vnfProductName:
        description: >
          Name to identify the VNF Product. The value is copied from the VNFD.
        type: string
      vnfSoftwareVersion:
        description: >
          Software version of the VNF. The value is copied from the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Version"
      vnfdVersion:
        description: >
          Identifies the version of the VNFD. The value is copied from the VNFD.
        $ref: "../../..//definitions/SOL002SOL003_def.yaml#/definitions/Version"
      vnfConfigurableProperties:
        description: >
          Current values of the configurable properties of the VNF instance.
          Configurable properties referred in this attribute are declared in
          the VNFD.
          ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD
          based on TOSCA specifications.
          VNF configurable properties are sometimes also referred to as
          configuration parameters applicable to a VNF. Some of these are set
          prior to instantiation and cannot be modified if the VNF is
          instantiated, some are set prior to instantiation (are part of
          initial configuration) and can be modified later, and others can be
          set only after instantiation. The applicability of certain
          configuration may depend on the VNF and the required operation of
          the VNF at a certain point in time.
          These configurable properties include the following standard
          attributes, which are declared in the VNFD if auto-scaling and/or
          auto-healing are supported by the VNF:
          * isAutoscaleEnabled: If present, the VNF supports auto-scaling. If
            set to true, auto-scaling is currently enabled. If set to false,
            auto-scaling is currently disabled.
          * isAutohealEnabled: If present, the VNF supports auto-healing. If
            set to true, auto-healing is currently enabled. If set to false,
            auto-healing is currently disabled.
          These configurable properties can be initialized with default values
          from the VNFD.
          Configurable properties can be modified with values passed in the request
          structures of certain LCM operations, such as the InstantiateVnfRequest
          structure.
          Further, these configurable properties can be created, modified or
          deleted with the PATCH method.

          NOTE: Upon creation of the VnfInstance structure, the VNFM shall create and initialize all child attributes
          of "vnfConfigurableProperties", "metadata" and "extensions" that were declared in the VNFD with a defined
          initial value. The defined initial values can be declared in the VNFD, and/or, in case of "metadata",
          obtained from the "CreateVnfRequest" structure. Child attributes of "vnfConfigurableProperties", "metadata"
          and "extensions" that have no defineddeclared initial value shall not be created, in order to be consistent
          with the semantics of the JSON Merge Patch method (see IETF RFC 7396) that interprets null values as deletion
          request.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      vimConnectionInfo:
        description: >
          Information about VIM connections to be used for managing the
          resources for the VNF instance. The keys of the map, each of
          which identifies information about a particular VIM connection,
          are managed by the NFVO and referenced from other data structures
          via the "vimConnectionId" attribute. This attribute shall only
          be supported and present if VNF-related resource management in
          direct mode is pplicable.
          This attribute can be modified with the PATCH method.
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"
      instantiationState:
        description: >
          The instantiation state of the VNF.
        type: string
        enum:
          - NOT_INSTANTIATED
          - INSTANTIATED
      instantiatedVnfInfo:
        description: >
          Information specific to an instantiated VNF instance. This attribute
          shall be present if the instantiateState attribute value is
          INSTANTIATED.
        type: object
        required:
          - flavourId
          - vnfState
        properties:
          flavourId:
            description: >
              Identifier of the VNF deployment flavour applied to this VNF instance.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
          vnfState:
            description: >
              The state of the VNF instance.
            $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VnfOperationalStateType"
          scaleStatus:
            description: >
              Scale status of the VNF, one entry per aspect.
              Represents for every scaling aspect how "big" the VNF has been scaled w.r.t. that aspect.
              This attribute shall be present if the VNF supports scaling.
              See clause B.2 for an explanation of VNF scaling.
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ScaleInfo"
          maxScaleLevels:
            description: >
              Maximum allowed scale levels of the VNF, one entry per aspect.
              This attribute shall be present if the VNF supports scaling.
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ScaleInfo"
          extCpInfo:
            description: >
              Information about the external CPs exposed by the VNF instance. When trunking is enabled,
              the list of entries includes both, external CPs corresponding to parent ports of a trunk,
              and external CPs associated to sub-ports of a trunk.
            type: array
            minItems: 1
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VnfExtCpInfo"
          extVirtualLinkInfo:
            description: >
              Information about the external VLs the VNF instance is connected to.
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ExtVirtualLinkInfo"
          extManagedVirtualLinkInfo:
            description: >
              Information about the externally-managed internal VLs of the VNF instance.

              NOTE: It is possible to have several ExtManagedVirtualLinkInfo for the same
              VNF internal VL in case of a multi-site VNF spanning several VIMs. The set of
              ExtManagedVirtualLinkInfo corresponding to the same VNF internal VL shall indicate
              so by referencing to the same VnfVirtualLinkDesc and externally-managed multi-site
              VL instance (refer to clause 5.5.3.3).
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ExtManagedVirtualLinkInfo"
          monitoringParameters:
            description: >
              Active monitoring parameters.
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/MonitoringParameter"
          localizationLanguage:
            description: >
              Information about localization language of the VNF (includes e.g.
              strings in the VNFD). The localization languages supported by a VNF
              can be declared in the VNFD, and localization language selection can
              take place at instantiation time.
              The value shall comply with the format defined in IETF RFC 5646.
            type: string
          vnfcResourceInfo:
            description: >
              Information about the virtualised compute and storage resources used
              by the VNFCs of the VNF instance.
            type: array
            items:
              $ref: "#/definitions/VnfcResourceInfo"
          virtualLinkResourceInfo:
            description: >
              Information about the virtualised network resources used by the VLs
              of the VNF instance.
            type: array
            items:
              $ref: "#/definitions/VnfVirtualLinkResourceInfo"
          virtualStorageResourceInfo:
            description: >
              Information on the virtualised storage resource(s) used as storage for the VNF instance.
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VirtualStorageResourceInfo"
      metadata:
        description: >
          Additional VNF-specific attributes that provide metadata describing the VNF instance.
          These attributes represent values that are stored persistently in the VnfInstance structure
          for consumption by functional blocks that invoke the VNF lifecycle management interface.
          They are not consumed by the VNFM, or the lifecycle management scripts.
          Modifying the values of these attributes has no effect on the VNF instance, it only affects
          the information represented in the VnfInstance structure.
          Metadata that are writeable are the VNF provider foresees are expected to be declared in the VNFD.
          The declaration of metadata in the VNFD can optionally contain the specification of initial values.
          The VNFM shall accept requests to write metadata that are not declared in the VNFD.
          These attributes can be initialized with default values from the VNFD or with values
          passed in the CreateVnfRequest structure (see clause 5.4.2.3.1).
          This attributeThese attributes can be created, modified or removed with the PATCH method.

          ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD based on TOSCA specifications.
          Upon creation of the VnfInstance structure, the VNFM shall create and initialize all child attributes
          of "vnfConfigurableProperties", "metadata" and "extensions" that were declared in the VNFD with
          a defined initial value. Child attributes of "vnfConfigurableProperties", "metadata" and "extensions"
          that have no declared initial value shall not be created, in order to be consistent with the semantics
          of the JSON Merge Patch method (see IETF RFC 7396) that interprets null values as deletion request.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          Additional VNF-specific attributes that affect the lifecycle management of this VNF instance.
          These attributes represent values that are stored persistently in the VnfInstance structure
          for consumption by the VNFM or the lifecycle management scripts during the execution of
          VNF lifecycle management operations.
          All extensions that are allowed for the VNF are declared in the VNFD. The declaration of an extension
          in the VNFD contains information on whether its presence is optional or required, and optionally
          can specify an initial value. See note 2 and note 4. The VNFM shall reject requests to write extension
          attributes that are not declared in the VNFD with a "422 Unprocessable entity" error response as defined
          in clause 6.4 of ETSI GS NFV-SOL 013.
          Modifying the values of these attributes has no direct effect on the VNF instance; however, the modified
          attribute values can be considered during subsequent VNF lifecycle management operations, which means that
          the modified values can indirectly affect the configuration of the VNF instance.
          These attributes can be initialized with default values from the VNFD.
          These attributes can be modified with values passed in the request structures of certain LCM operations,
          such as the InstantiateVnfRequest structure.
          Further, these attributes can be created, modified or deleted with the PATCH method.

          NOTE: Upon creation of the VnfInstance structure, the VNFM shall create and initialize all child attributes
          of "vnfConfigurableProperties", "metadata" and "extensions" that were declared in the VNFD with a defined
          initial value. The defined initial values can be declared in the VNFD, and/or, in case of "metadata",
          obtained from the "CreateVnfRequest" structure. Child attributes of "vnfConfigurableProperties", "metadata"
          and "extensions" that have no defineddeclared initial value shall not be created, in order to be consistent
          with the semantics of the JSON Merge Patch method (see IETF RFC 7396) that interprets null values as deletion
          request.
      _links:
        description: >
          Links to resources related to this resource.
        type: object
        required:
          - self
        properties:
          self:
            description: URI of this resource.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          indicators:
            description: Indicators related to this VNF instance, if applicable.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          instantiate:
            description: >
              Link to the "Instantiate VNF task" resource, if the related operation
              is possible based on the current status of this VNF instance
              resource (i.e. VNF instance in NOT_INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          terminate:
            description: >
              Link to the "Terminate VNF task" resource, if the related operation
              is possible based on the current status of this VNF instance
              resource (i.e. VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          scale:
            description: >
              Link to the "Scale VNF task" resource, if the related operation is
              supported for this VNF instance, and is possible based on the
              current status of this VNF instance resource (i.e. VNF instance
              is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          scaleToLevel:
            description: >
              Link to the "Scale VNF to level task" resource, if the related
              operation is supported for this VNF instance, and is possible
              based on the current status of this VNF instance resource
              (i.e. VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          changeFlavour:
            description: >
              Link to the "Change VNF flavour task" resource, if the related
              operation is supported for this VNF instance, and is possible
              based on the current status of this VNF instance resource
              (i.e. VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          heal:
            description: >
              Link to the "Heal VNF task" resource, if the related operation is
              supported for this VNF instance, and is possible based on the
              current status of this VNF instance resource
              (i.e. VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          operate:
            description: >
              Link to the "Operate VNF task" resource, if the related operation is
              supported for this VNF instance, and is possible based on the
              current status of this VNF instance resource
              (i.e. VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          changeExtConn:
            description: >
              Link to the "Change external VNF connectivity task" resource, if the related
              operation is possible based on the current status of this VNF
              instance resource (i.e. VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          createSnapshot:
            description: >
              Link to the "Create VNF snapshot task" resource, if the related operation is
              supported for this VNF instance and is possible based on the current status of
              this VNF instance resource (i.e., VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          revertToSnapshot:
            description: >
              Link to the "Revert to VNF snapshot task" resource, if the related operation is
              supported for this VNF instance and is possible based on the current status of
              this VNF instance resource (i.e., VNF instance is in INSTANTIATED state).
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"

  VnfcResourceInfo:
    description: >
      This type represents the information on virtualised compute and storage
      resources used by a VNFC in a VNF instance.
    type: object
    required:
      - id
      - vduId
      - computeResource
    properties:
      id:
        description: >
          Identifier of this VnfcResourceInfo instance.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      vduId:
        description: >
          Reference to the applicable VDU in the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change
          current VNF package" operation or due to its final failure).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      computeResource:
        description: >
          Reference to the VirtualCompute resource.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      zoneId:
        description: >
          The identifier of the resource zone, as managed by the
          resource management layer (typically, the VIM), where
          the referenced VirtualCompute resource is placed.
          Shall be provided if this information is available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      storageResourceIds:
        description: >
          References to the VirtualStorage resources. The value refers to a
          VirtualStorageResourceInfo item in the VnfInstance.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      reservationId:
        description: >
          The reservation identifier applicable to the resource. It shall be
          present when an applicable reservation exists.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfcCpInfo:
        description: >
          All the CPs of the VNFC instance.
          Shall be present when that particular CP of the VNFC instance is exposed as an external CP of the VNF instance
          or is connected to an external CP of the VNF instance.
          A VNFC CP is "connected to" an external CP if the VNFC CP is connected to an internal VL that exposes an external CP.
          A VNFC CP is "exposed as" an external CP if it is connected directly to an external VL.
          May be present otherwise.
        type: array
        items:
          type: object
          required:
            - id
            - cpdId
          properties:
            id:
              description: >
                Identifier of this VNFC CP instance and the associated array
                entry.
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
            cpdId:
              description: >
                Identifier of the VDU CPD, cpdId, in the VNFD.
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
            vnfExtCpId:
              description: >
                Identifier of the related external CP. Shall be present when the VNFC CP is exposed as an external CP of
                the VNF instance or connected to an external CP of the VNF instance (see note) and shall be absent otherwise.

                NOTE: A VNFC CP is "connected to" an external CP if the VNFC CP is connected to an internal VL that exposes
                an external CP. A VNFC CP is "exposed as" an external CP if it is connected directly to an external VL.
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
            cpProtocolInfo:
              description: >
                Network protocol information for this CP. May be omitted if the VNFC CP is exposed as an external CP.
                The information can be omitted because it is already available as part of the external CP information.
              type: array
              items:
                $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/CpProtocolInfo"
            vnfLinkPortId:
              description: >
                Identifier of the "VnfLinkPortInfo" structure in the "VnfVirtualLinkResourceInfo" structure. Shall be present if
                the CP is associated to a link port on an internal VL of the VNF instance and shall be absent otherwise.
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
            metadata:
              description: >
                Metadata about this CP.
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      metadata:
        description: >
          Metadata about this resource.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  VnfSnapshotInfo:
    description: >
      This type represents an "Individual VNF snapshot" resource.
      It shall comply with the provisions defined in table 5.5.2.22-1.
    type: object
    required:
      - id
      - _links
    properties:
      id:
        description: >
          Identifier of the "Individual VNF snapshot" resource. This identifier is allocated by the VNFM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfSnapshotPkgId:
        description: >
          Identifier of the VNF snapshot package information held by the NFVO. Shall be present when the
          “Individual VNF snapshot" resource is created from a VNF snapshot package extraction.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfSnapshot:
        description: >
          Information about the VNF snapshot, content and/or references to its content. Shall be present
          when the "Individual VNF snapshot" resource is associated to a VNF snapshot created via the
          corresponding "Create VNF Snapshot" task resource or extracted from a VNF snapshot package.
        $ref: "#/definitions/VnfSnapshot"
      _links:
        description: >
          Links to resources related to this resource.
        type: object
        required:
          - self
        properties:
          self:
            description: >
              URI of this resource.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          takenFrom:
            description: >
              Link to the VNF instance from which this snapshot was taken. Shall be present when the
              "Individual VNF snapshot" resource is associated to a VNF snapshot created via the
              corresponding "Create VNF snapshot" task resource.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"

  VnfStateSnapshotInfo:
    description: >
      This type represents information about VNF-specific state snapshot data.
    type: object
    required:
      - checksum
      - isEncrypted
    properties:
      checksum:
        description: >
          Checksum of the VNF state snapshot file. Hash algorithms applicable to VNF snapshot package artifacts
          are defined in ETSI GS NFV-SOL 010.
          $ref: "../definitions/SOL002SOL003_def.yaml#/definitions/Checksum"
      isEncrypted:
        description: >
          Reflects whether the VNF state snapshot content is encrypted (true) or not (false).
          $ref: "../definitions/SOL002SOL003_def.yaml#/definitions/Boolean"
      metadata:
        description: >
          The metadata with additional information such as content type, size, creation date, etc.
          $ref: "../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  VnfSnapshot:
    description: >
      This type represents a VNF snapshot.
      It shall comply with the provisions defined in table 5.5.2.23-1.
    type: object
    required:
      - id
      - vnfInstanceId
      - triggeredAt
      - vnfdId
      - vnfInfo
      - vnfcSnapshots
    properties:
      id:
        description: >
          Identifier of the VNF Snapshot. This identifier is allocated by the VNFM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfInstanceId:
        description: >
          Identifier of the snapshotted VNF instance.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      creationStartedAt:
        description: >
          Timestamp indicating when the VNF snapshot creation has been started by the VNFM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      creationFinishedAt:
        description: >
          Timestamp indicating when the VNF snapshot has been completed by the VNFM.
          Shall be present once the VNF snapshot creation has been completed.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      vnfdId:
        description: >
          Identifier of the VNFD in use at the time the snapshot of the VNF instance has been created.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfInstance:
        description: >
          VNF Instance information of the snapshotted VNF instance. This is a copy of the "ndividual VNF instance" resource.
        $ref: '#/definitions/VnfInstance'
      vnfcSnapshots:
        description: >
          Information about VNFC snapshots constituting this VNF snapshot.
        type: array
        items:
          $ref: '#/definitions/VnfcSnapshotInfo'
      vnfStateSnapshotInfo:
        description: >
          Information about VNF-specific state snapshot data.
          This attribute shall not be present before the VNF snapshot has been completed.
          Otherwise, this attribute shall be present if the VNF snapshot has associated
          additional VNF-specific state data.
        $ref: '#/definitions/VnfStateSnapshotInfo'
      userDefinedData:
        description: >
          User defined data for the VNF snapshot.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      _links:
        description: >
          Links to resources related to this resource.
        type: object
        required:
          - self
        properties:
          self:
            description: >
              URI of this resource.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          vnfStateSnapshot:
            description: >
              Link to the "VNF state snapshot" resource. This attribute shall not be
              present before the VNF snapshot has been completed. Otherwise, this
              attribute shall be present if the VNF snapshot has associated additional
              VNFspecific state data.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"

  VnfcSnapshotInfo:
    description: >
      This type represents a VNFC snapshot.
    type: object
    required:
      - id
      - vnfcInstanceId
      - triggeredAt
      - vnfcResourceId
    properties:
      id:
        description: >
          Identifier of the information held by the VNFM about a specific VNFC snapshot. This identifier is allocated by
          the VNFM and is unique within the scope of a VNF snapshot.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      vnfcInstanceId:
        description: >
          Identifier of the snapshotted VNFC instance.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      creationStartedAt:
        description: >
          Timestamp indicating when the VNF snapshot creation has been started by the VNFM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      creationFinishedAt:
        description: >
          Timestamp indicating when the VNFC snapshot has been completed. Shall be present once the VNFC snapshot
          creation has been completed by the VNFM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      vnfcResourceInfoId:
        description: >
          Reference to the "VnfcResourceInfo" structure in the "VnfInstance" structure that represents the resource
          of the snapshotted VNFC instance. A snapshot of that structure is available in the "vnfInstance" attribute
          of the "VnfSnapshot" structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      computeSnapshotResource:
        description: >
          Reference to a compute snapshot resource.
          The identifier of the compute snapshot resource is assigned during creation of a VNFC snapshot
          being returned from the VIM as output data in the response message of the individual resource operations.
          This attribute shall only be present for a VNFC snapshot that has been newly created by the VNFM as a result o
          f the "Create VNF snapshot task".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      storageSnapshotResources:
        description: >
          Mapping of the storage resources associated to the VNFC with the storage snapshot resources.
        type: array
        items:
          type: object
          required:
            - storageResourceId
          properties:
            storageResourceId:
              description: >
                Reference to the "VirtualStorageResourceInfo" structure in the "VnfInstance" structure
                that represents the virtual storage resource.
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
            storageSnapshotResource:
              description: >
                Reference to a storage snapshot resource.
                The identifier of the storage snapshot resource is assigned during creation of a VNFC
                snapshot being returned from the VIM as output data in the response message of the
                individual resource operations. This attribute shall only be present for a VNFC snapshot
                with an associated storage resource and that has been newly created by the VNFM as a
                result of the "Create VNF snapshot task".
              $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      userDefinedData:
        description: >
          User defined data for the VNFC snapshot.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  VnfVirtualLinkResourceInfo:
    description: >
      This type represents the information that allows addressing a virtualised
      resource that is used by an internal VL instance in a VNF instance.
    type: object
    required:
      - id
      - vnfVirtualLinkDescId
      - networkResource
    properties:
      id:
        description: >
          Identifier of this VnfVirtualLinkResourceInfo instance.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      vnfVirtualLinkDescId:
        description: >
          Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change
          current VNF package" operation or due to its final failure).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      networkResource:
        description: >
          Reference to the VirtualNetwork resource.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      zoneId:
        description: >
          The identifier of the resource zone, as managed by the resource
          management layer (typically, the VIM), where the referenced
          VirtualNetwork resource is placed. Shall be provided if this
          information is available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      reservationId:
        description: >
          The reservation identifier applicable to the resource. It shall be
          present when an applicable reservation exists.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfLinkPorts:
        description: >
          Links ports of this VL.
          Shall be present when the linkPort is used for external connectivity
          by the VNF (refer to VnfLinkPortInfo).
          May be present otherwise.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VnfLinkPortInfo"
      metadata:
        description: >
          Metadata about this resource.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  AffectedVnfc:
    description: >
      This type provides information about added, deleted, modified and
      temporary VNFCs.
    type: object
    required:
      - id
      - vduId
      - changeType
      - computeResource
    properties:
      id:
        description: >
          Identifier of the Vnfc instance, identifying the applicable
          "vnfcResourceInfo" entry in the "VnfInstance" data type.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      vduId:
        description: >
          Identifier of the related VDU in the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case of a "change current VNF Package" to identify whether the affected VNFC instance is
          associated to a VDU which is referred from the source or destination VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      changeType:
        description: >
          Signals the type of change. Permitted values:
          * ADDED
          * REMOVED
          * MODIFIED
          * TEMPORARY
          For a temporary resource, an AffectedVnfc structure exists as long
          as the temporary resource exists.
        type: string
        enum:
          - ADDED
          - REMOVED
          - MODIFIED
          - TEMPORARY
      computeResource:
        description: >
          Reference to the VirtualCompute resource. Detailed information is
          (for new and modified resources) or has been (for removed
          resources) available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      resourceDefinitionId:
        description: >
          The identifier of the "ResourceDefinition" in the granting exchange
          related to the LCM operation occurrence. It shall be present when
          an applicable GrantInfo for thegranted resource exists. See note.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      zoneId:
        description: >
          The identifier of the resource zone, as managed by the resource management
           layer (typically, the VIM), where the referenced VirtualCompute resource is placed.
           Shall be provided if this information is available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      metadata:
        description: >
          Metadata about this resource.
          The content of this attribute shall be a copy of the content of the
          "metadata" attribute of the VnfcResourceInfo structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      affectedVnfcCpIds:
        description: >
          Identifiers of CP(s) of the VNFC instance that were affected by the
          change.
          Shall be present for those affected CPs of the VNFC instance that
          are associated to an external CP of the VNF instance.
          May be present for further affected CPs of the VNFC instance.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      addedStorageResourceIds:
        description: >
          References to VirtualStorage resources that have been added. Each
          value refers to a VirtualStorageResourceInfo item in the
          VnfInstance that was added to the VNFC. It shall be provided if at
          least one storage resource was added to the VNFC.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      removedStorageResourceIds:
        description: >
          References to VirtualStorage resources that have been removed.
          The value contains the identifier of a VirtualStorageResourceInfo
          item that has been removed from the VNFC, and might no longer exist
          in the VnfInstance.
          It shall be provided if at least one storage resource was removed
          from the VNFC.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"

  VnfLcmOpOcc:
    description: >
      This type represents a VNF lifecycle management operation occurrence. Shall be set to the value of the "id"
      attribute in the "Grant" representing the associated "Individual Grant", if such grant exists.
    type: object
    oneOf:
      - required:
          - changedInfo
      - required:
          - modificationsTriggeredByVnfPkgChange
    required:
      - id
      - operationState
      - stateEnteredTime
      - startTime
      - vnfInstanceId
      - operation
      - isAutomaticInvocation
      - isCancelPending
    properties:
      id:
        description: >
          Identifier of this VNF lifecycle management operation occurrence.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      operationState:
        description: >
          The state of the LCM operation.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/LcmOperationStateType"
      stateEnteredTime:
        description: >
          Date-time when the current state has been entered.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      startTime:
        description: >
          Date-time of the start of the operation.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      vnfInstanceId:
        description: >
          Identifier of the VNF instance to which the operation applies
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      grantId:
        description: >
          Identifier of the grant related to this VNF LCM operation
          occurrence. Shall be set to the value of the "id" attribute
          in the "Grant" representing the associated "Individual Grant",
          if such grant exists.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      operation:
        description: >
          Type of the actual LCM operation represented by this VNF LCM
          operation occurrence.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/LcmOperationType"
      isAutomaticInvocation:
        description: >
          Set to true if this VNF LCM operation occurrence has been triggered
          by an automated procedure inside the VNFM (i.e.
          ScaleVnf / ScaleVnfToLevel triggered by auto-scale, or HealVnf
          triggered by auto-heal). Set to false otherwise.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Boolean"
      operationParams:
        description: >
          Input parameters of the LCM operation. This attribute shall be
          formatted according to the request data type of the related LCM
          operation. The following mapping between operationType and the
          data type of this attribute shall apply:
          * INSTANTIATE: InstantiateVnfRequest
          * SCALE: ScaleVnfRequest
          * SCALE_TO_LEVEL: ScaleVnfToLevelRequest
          * CHANGE_FLAVOUR: ChangeVnfFlavourRequest
          * OPERATE: OperateVnfRequest
          * HEAL: HealVnfRequest
          * CHANGE_EXT_CONN: ChangeExtVnfConnectivityRequest
          * TERMINATE: TerminateVnfRequest
          * MODIFY_INFO: VnfInfoModifications
          * CREATE_SNAPSHOT: CreateVnfSnapshotRequest
          * REVERT_TO_SNAPSHOT: RevertToVnfSnapshotRequest
          * CHANGE_VNFPKG: ChangeCurrentVnfPkgRequest
        type: object
      isCancelPending:
        description: >
          If the VNF LCM operation occurrence is in "STARTING", "PROCESSING"
          or "ROLLING_BACK" state and the operation is being cancelled, this
          attribute shall be set to true. Otherwise, it shall be set to false.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Boolean"
      cancelMode:
        description: >
          The mode of an ongoing cancellation. Shall be present when
          isCancelPending=true, and shall be absent otherwise.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/CancelModeType"
      error:
        description: >
          If "operationState" is "FAILED_TEMP" or "FAILED" or "operationState"
          is "PROCESSING" or "ROLLING_BACK" and previous value of
          "operationState" was "FAILED_TEMP", this attribute shall be present
          and contain error information, unless it has been requested to be
          excluded via an attribute selector.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ProblemDetails"
      resourceChanges:
        description: >
          This attribute contains information about the cumulative changes to
          virtualised resources that were performed so far by the LCM
          operation since its start, if applicable.
        type: object
        properties:
          affectedVnfcs:
            description: >
              Information about VNFC instances that were affected during the
              lifecycle operation.
              This allows the API consumer to obtain the information contained in
              the latest "result" notification if it has not received it due to an
              error or a wrongly configured subscription filter.
            type: array
            items:
              $ref: "#/definitions/AffectedVnfc"
          affectedVirtualLinks:
            description: >
              Information about VL instances that were affected during the
              lifecycle operation.
              This allows the API consumer to obtain the information contained in
              the latest "result" notification if it has not received it due to an
              error or a wrongly configured subscription filter.
              For a particular affected VL, there shall be as many "AffectedVirtualLink"
              entries as needed for signalling the different types of changes, i.e.,
              one per virtual link and change type. For instance, in the case of
              signaling affected VL instances involving the addition of a particular VL
              instance with links ports, one "AffectedVirtualLink" entry signals the
              addition of the VL by using the "changeType" attribute of "AffectedVirtualLink"
              structure equal to "ADDED", and another "AffectedVirtualLink" entry signals
              the addition of VNF link ports of the VL by using the "changeType" equal to
              "LINK_PORT_ADDED".
            type: array
            items:
              $ref: "#/definitions/AffectedVirtualLink"
          affectedExtLinkPorts:
            description: >
              Information about external VNF link ports that were affected during the lifecycle operation. This allows
              the API consumer to obtain the information contained in the latest "result" notification if it has not
              received it due to an error or a wrongly configured subscription filter.
            type: array
            items:
              $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/AffectedExtLinkPort"
          affectedVirtualStorages:
            description: >
              Information about virtualised storage instances that were affected
              during the lifecycle operation.
              This allows the API consumer to obtain the information contained
              in the latest "result" notification if it has not received it due to
              an error or a wrongly configured subscription filter.
            type: array
            items:
              $ref: "#/definitions/AffectedVirtualStorage"
      changedInfo:
        description: >
          Information about the changed VNF instance information, including
          VNF configurable properties, if applicable.
          This allows the NFVO to obtain the information contained in the
          latest "result" notification if it has not received it due to an
          error or a wrongly configured subscription filter.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VnfInfoModifications"
      changedExtConnectivity:
        description: >
          Information about changed external connectivity, if applicable.
          This allows the NFVO to obtain the information contained in the
          latest "result" notification if it has not received it due to an
          error or a wrongly configured subscription filter.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ExtVirtualLinkInfo"
      modificationsTriggeredByVnfPkgChange:
        description: >
          Information about performed changes of "VnfInstance" attributes triggered by changing the current VNF package,
          if applicable. Shall be absent if the "operation" attribute is different from "CHANGE_VNFPKG".
          This allows the API consumer to obtain the information contained in the latest "result" notification if it has
          not received it due to an error or a wrongly configured subscription filter.
          Not more than one of changedInfo and modificationsTriggeredByVnfPkgChange shall be present.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ModificationsTriggeredByVnfPkgChange"
      vnfSnapshotInfoId:
        description: >
          Identifier of the "individual VNF snapshot" resource. Shall be present if applicable to the type of LCM operation,
          i.e., if the value of the "operation" attribute is either "CREATE_SNAPSHOT" or "REVERT_TO_SNAPSHOT".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      _links:
        description: >
          Links to resources related to this resource.
        type: object
        required:
          - self
          - vnfInstance
        properties:
          self:
            description: >
              URI of this resource.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          vnfInstance:
            description: >
              Link to the VNF instance that the operation applies to.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          grant:
            description: >
              Link to the grant for this operation, if one exists.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          cancel:
            description: >
              Link to the task resource that represents the "cancel" operation
              for this VNF LCM operation occurrence, if cancelling is
              currently allowed.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          retry:
            description: >
              Link to the task resource that represents the "retry" operation
              for this VNF LCM operation occurrence, if retrying is currently
              allowed.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          rollback:
            description: >
              Link to the task resource that represents the "rollback"
              operation for this VNF LCM operation occurrence, if rolling back
              is currently allowed.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          fail:
            description: >
              Link to the task resource that represents the "fail" operation
              for this VNF LCM operation occurrence, if declaring as failed is
              currently allowed.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          vnfSnapshot:
            description: >
              Link to the VNF snapshot resource, if the VNF LCM operation occurrence is related to a VNF snapshot.
              Shall be present if operation="CREATE_SNAPSHOT" or operation="REVERT_TO_SNAPSHOT".
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"

  VnfLcmOperationOccurrenceNotification:
    description: >
      This type represents a VNF lifecycle management operation occurrence
      notification, which informs the receiver of changes in the VNF
      lifecycle caused by a VNF LCM operation occurrence. The support of the
      notification is mandatory.
      This notification shall be triggered by the VNFM when there is a change in the state of a
      VNF LCM operation occurrence that changes the VNF lifecycle, includingwhich represents an
      occurrence of one the following LCM operations:
      * Instantiation of the VNF
      * Scaling of the VNF instance (including auto-scaling)
      * Healing of the VNF instance (including auto-healing)
      * Change of the state of the VNF instance (i.e. Operate VNF)
      * Change of the deployment flavour of the VNF instance
      * Change of the external connectivity of the VNF instance
      * Termination of the VNF instance
      * Modification of VNF instance information and/or VNF configurable
        properties through the "PATCH" method on the "Individual VNF instance"
        resource
      * Creation of a VNF snapshot
      * Reversion of the VNF instance to a VNF snapshot.
      Clause 5.6.2 defines the states and state transition of a VNF LCM operation occurrence,
      and also specifies details of the notifications to be emitted at each state transition.
      If this is the initial notification about the start of a VNF LCM operation occurrence,
      it is assumed that the notification is sent by the VNFM before any action (including sending the grant request)
      is taken as part of the LCM operation. Due to possible race conditions, the "start" notification,
      the grant request and the LCM operation acknowledgment (i.e. the "202 Accepted" response)
      can arrive in any order at the NFVO, and the NFVO shall be able to handle such a situation.
      If this is a notification about a final or intermediate result state of a VNF LCM operation occurrence,
      the notification shall be sent after all related actions of the LCM operation that led
      to this state have been executed.
      The new state shall be set in the "Individual VNF LCM operation occurrence" resource before
      the notification about the state change is sent.
      See clause 5.6.2.2 for further provisions regarding sending this notification, including
      in cases of handling LCM operation errors.
    type: object
    required:
      - id
      - notificationType
      - subscriptionId
      - timeStamp
      - notificationStatus
      - operationState
      - vnfInstanceId
      - operation
      - isAutomaticInvocation
      - vnfLcmOpOccId
      - _links
    properties:
      id:
        description: >
          Identifier of this notification. If a notification is sent multiple
          times due to multiple subscriptions, the "id" attribute of all these
          notifications shall have the same value.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      notificationType:
        description: >
          Discriminator for the different notification types. Shall be set to
          "VnfLcmOperationOccurrenceNotification" for this notification type.
        type: string
        enum:
          - VnfLcmOperationOccurrenceNotification
      subscriptionId:
        description: >
          Identifier of the subscription that this notification relates to.Shall be set to the value of the "id" attribute
          of the "LccnSubscription" representing the associated "Individual subscription" resource.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      timeStamp:
        description: >
          Date-time of the generation of the notification.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/DateTime"
      notificationStatus:
        description: >
          Indicates whether this notification reports about the start of a
          lifecycle operation or the result of a lifecycle operation.
          Permitted values:
          * START: Informs about the start of the VNF LCM operation
            occurrence.
          * RESULT: Informs about the final or intermediate result of the VNF
            LCM operation occurrence.
        type: string
        enum:
          - START
          - RESULT
      operationState:
        description: >
          The state of the VNF LCM operation occurrence.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/LcmOperationStateType"
      vnfInstanceId:
        description: >
          The identifier of the VNF instance affected.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      operation:
        description: >
          The lifecycle management operation.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/LcmOperationType"
      isAutomaticInvocation:
        description: >
          Set to true if this VNF LCM operation occurrence has been triggered
          by an automated procedure inside the VNFM
          (i.e. ScaleVnf / ScaleVnfToLevel triggered by auto-scale, or HealVnf
          triggered by auto-heal).
          Set to false otherwise.
        type: boolean
      verbosity:
        description: >
          This attribute signals the verbosity of the notification. If it is not present, it shall default to the value "FULL".
          If the value is "SHORT", full change details can be obtained by performing a GET request on the "Individual LCM
          operation occurrence" resource that is signalled by the "vnfLcmOpOcc" child attribute of the "_links" attribute.
        $ref: '../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/LcmOpOccNotificationVerbosityType'
      vnfLcmOpOccId:
        description: >
          The identifier of the VNF lifecycle management operation occurrence associated to the notification. Shall be
          set to the value of the "id" attribute of the "VnfLcmOpOcc" representing the associate "Individual VNF lifecycle
          management operation occurrence" resource.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      affectedVnfcs:
        description: >
          Information about VNFC instances that were affected during the
          lifecycle operation.
          Shall be present if the "notificationStatus" is set to "RESULT",
          the "verbosity" attribute is set to "FULL"  and the operation has
          performed any resource modification. Shall be absent otherwise.
          This attribute contains information about the cumulative changes
          to virtualised resources that were performed so far by the VNF LCM
          operation occurrence and by any of the error handling procedures
          for that operation occurrence.
        type: array
        items:
          $ref: "#/definitions/AffectedVnfc"
      affectedVirtualLinks:
        description: >
          Information about VL instances that were affected during the
          lifecycle operation.
          Shall be present if the "notificationStatus" is set to "RESULT" and
          the operation has performed any resource modification. Shall be
          absent otherwise. This attribute contains information about the
          cumulative changes to virtualised resources that were performed so
          far by the VNF LCM operation occurrence and by any of the error
          handling procedures for that operation occurrence.
          For a particular affected VL, there shall be as many "AffectedVirtualLink"
          entries as needed for signalling the different types of changes, i.e.,
          one per virtual link and change type. For instance, in the case of signaling
          affected VL instances involving the addition of a particular VL instance with
          links ports, one "AffectedVirtualLink" entry signals the addition of the VL by
          using the "changeType" attribute of "AffectedVirtualLink" structure equal to
          "ADDED", and another "AffectedVirtualLink" entry signals the addition of VNF
          link ports of the VL by using the "changeType" equal to "LINK_PORT_ADDED".
        type: array
        items:
          $ref: "#/definitions/AffectedVirtualLink"
      affectedExtLinkPorts:
        description: >
          Information about external VNF link ports that were affected during
          the lifecycle operation.
          Shall be present if the "notificationStatus" is set to "RESULT",
          the "verbosity" attribute is set to "FULL"  and the operation has
          performed any resource modification. Shall be absent otherwise.
          This attribute contains information about the cumulative changes
          to virtualised resources that were performed so far by the VNF LCM
          operation occurrence and by any of the error handling procedures
          for that operation occurrence.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/AffectedExtLinkPort"
      affectedVirtualStorages:
        description: >
          Information about virtualised storage instances that were affected
          during the lifecycle operation.
          Shall be present if the "notificationStatus" is set to "RESULT" and
          the operation has performed any resource modification. Shall be
          absent otherwise. This attribute contains information about the
          cumulative changes to virtualised resources that were performed so
          far by the VNF LCM operation occurrence and by any of the error
          handling procedures for that operation occurrence.
        type: array
        items:
          $ref: "#/definitions/AffectedVirtualStorage"
      changedInfo:
        description: >
          Information about the changed VNF instance information, including
          changed VNF configurable properties.
          Shall be present if the "notificationStatus" is set to "RESULT",
          the "operation" attribute is not equal to "CHANGE_VNFPKG", the
          "verbosity" attribute is set to "FULL" and the operation has performed
          any changes to VNF instance information, including VNF configurable
          properties. Shall be absent otherwise.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/VnfInfoModifications"
      changedExtConnectivity:
        description: >
          Information about changed external connectivity, if this notification
          represents the result of a lifecycle operation occurrence.
          Shall be present if the "notificationStatus" is set to "RESULT",
          the "verbosity" attribute is set to "FULL" and the operation has made
          any changes to the external connectivity of the VNF instance. Shall be
          absent otherwise. Only information about external VL instances that
          have been added or modified shall be provided.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ExtVirtualLinkInfo"
      modificationsTriggeredByVnfPkgChange:
        description: >
          Information about performed changes of "VnfInstance" attributes triggered by changing the current VNF package.
          Shall be present if the "notificationStatus" is set to "RESULT", the "operation" attribute is equal to
          "CHANGE_VNFPKG", the "verbosity" attribute is set to "FULL" and the operation has performed any changes to VNF
          instance information, including VNF configurable properties. Shall be absent otherwise.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/ModificationsTriggeredByVnfPkgChange"
      error:
        description: >
          Details of the latest error, if one has occurred during executing
          the LCM operation (see clause 6.3 of ETSI GS NFV-SOL 013).
          Shall be present if the "operationState" attribute is "FAILED_TEMP", "FAILED"
          or "ROLLED_BACK" and shall be absent otherwise.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ProblemDetails"
      _links:
        description: >
          Links to resources related to this notification.
          The link URIs in this structure shall be set to point to the
          resources identified by the corresponding identifier attributes
          in this notification.
        $ref: "../../../definitions/SOL002SOL003VNFLifecycleManagement_def.yaml#/definitions/LccnLinks"

  AffectedVirtualLink:
    description: >
      This type provides information about added, deleted, modified and
      temporary VLs, and added or removed VNF link ports.
    type: object
    required:
      - id
      - vnfVirtualLinkDescId
      - changeType
      - networkResource
    properties:
      id:
        description: >
          Identifier of the virtual link instance, identifying the applicable
          "vnfVirtualLinkResourceInfo" entry in the "VnfInstance" data type.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      vnfVirtualLinkDescId:
        description: >
          Identifier of the related VLD in the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case of a "change current VNF Package" to identify whether the affected VL instance is
          associated to a VLD which is referred from the source or destination VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      changeType:
        description: >
          Signals the type of change. Permitted values:
          * ADDED
          * REMOVED
          * MODIFIED
          * TEMPORARY
          * LINK_PORT_ADDED
          * LINK_PORT_REMOVED
          For a temporary resource, an AffectedVirtualLink structure exists as
          long as the temporary resource exists.
          When signalling the addition (LINK_PORT_ADDED) or removal (LINK_PORT_REMOVED) of VNF link ports, the
          "networkResource" attribute refers to the affected virtual link instance, not the link port instance.
          The resource handles of the affected VNF link ports can be found by dereferencing the identifiers in the
          "vnfLinkPortIds" attribute.
        type: string
        enum:
          - ADDED
          - REMOVED
          - MODIFIED
          - TEMPORARY
          - LINK_PORT_ADDED
          - LINK_PORT_REMOVED
      networkResource:
        description: >
          Reference to the VirtualNetwork resource. Detailed information is
          (for new and modified resources) or has been (for removed
          resources) available from the VIM.
          When signalling the addition (LINK_PORT_ADDED) or removal (LINK_PORT_REMOVED) of VNF link ports, the
          "networkResource" attribute refers to the affected virtual link instance, not the link port instance.
          The resource handles of the affected VNF link ports can be found by dereferencing the identifiers in
          the "vnfLinkPortIds" attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      vnfLinkPortIds:
        description: >
          Identifiers of the link ports of the affected VL (reference to the vnfLinkPortInfo) related to the change.
          Each identifier references a "VnfLinkPortInfo" structure.
          Shall be set when changeType is equal to "LINK_PORT_ADDED" or "LINK_PORT_REMOVED", and the related
          “VnfLinkPortInfo” structures are present (case "added") or have been present (case "removed") in the
          “VnfVirtualLinkResourceInfo” or "ExtManagedVirtualLinkInfo" structures that are represented by the
          "vnfVirtualLinkResourceInfo" or "extManagedVirtualLinkInfo" attribute in the "VnfInstance" structure.
          When signalling the addition (LINK_PORT_ADDED) or removal (LINK_PORT_REMOVED) of VNF link ports, the
          "networkResource" attribute refers to the affected virtual link instance, not the link port instance.
          The resource handles of the affected VNF link ports can be found by dereferencing the identifiers in the
          "vnfLinkPortIds" attribute.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      resourceDefinitionId:
        description: >
          The identifier of the "ResourceDefinition" in the granting exchange
          related to the LCM operation occurrence. It shall be present when an
          applicable GrantInfo for the granted resource exists.
          When signalling the addition (LINK_PORT_ADDED) or removal (LINK_PORT_REMOVED) of VNF link ports, the
          "networkResource" attribute refers to the affected virtual link instance, not the link port instance.
          The resource handles of the affected VNF link ports can be found by dereferencing the identifiers in the
          "vnfLinkPortIds" attribute.
          The "resourceDefinitionId" attribute provides information to the API consumer (i.e. the NFVO) to assist
          in correlating the resource changes performed during the LCM operation with the granted resources in a
          specific Grant exchange, which is identified by the "grantId" available in the "Individual VNF lifecycle
          management operation occurrence" and the "id" in the "Individual Grant".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      zoneId:
        description: >
          The identifier of the resource zone, as managed by the resource
          management layer (typically, the VIM), where the referenced VirtualNetwork
          resource is placed. Shall be provided if this information is available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      metadata:
        description: >
          Metadata about this resource.
          The content of this attribute shall be a copy of the content of the
          "metadata" attribute of the VnfVirtualLinkResourceInfo structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"

  AffectedVirtualStorage:
    description: >
      This type provides information about added, deleted, modified and
      temporary virtual storage resources.
    type: object
    required:
      - id
      - virtualStorageDescId
      - changeType
      - storageResource
    properties:
      id:
        description: >
          Identifier of the storage instance, identifying the applicable
          "virtualStorageResourceInfo" entry in the "VnfInstance" data type.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      virtualStorageDescId:
        description: >
          Identifier of the related VirtualStorage descriptor in the VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case of a "change current VNF Package" to identify whether the affected virtual storage
          instance is associated to a VirtualStorage descriptor which is referred from the source or destination VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      changeType:
        description: >
          Signals the type of change. Permitted values:
          * ADDED
          * REMOVED
          * MODIFIED
          * TEMPORARY
          For a temporary resource, an AffectedVirtualStorage structure exists
          as long as the temporary resource exists.
        type: string
        enum:
          - ADDED
          - REMOVED
          - MODIFIED
          - TEMPORARY
      storageResource:
        description: >
          Reference to the VirtualStorage resource. Detailed information is
          (for new and modified resources) or has been (for removed
          resources) available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      resourceDefinitionId:
        description: >
          The identifier of the "ResourceDefinition" in the granting exchange
          related to the LCM operation occurrence. It shall be present when an
          applicable GrantInfo for the granted resource exists.
          The "resourceDefinitionId" attribute provides information to the API
          consumer (i.e. the NFVO) to assist in correlating the resource changes
          performed during the LCM operation with the granted resources in a
          specific Grant exchange, which is identified by the "grantId" available
          in the "Individual VNF lifecycle management operation occurrence" and
          the "id" in the "Individual Grant".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      zoneId:
        description: >
          The identifier of the resource zone, as managed by the resource
          management layer (typically, the VIM), where the referenced VirtualNetwork
          resource is placed. Shall be provided if this information is available from the VIM.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      metadata:
        description: >
          Metadata about this resource.
          The content of this attribute shall be a copy of the content of the
          "metadata" attribute of the VirtualStorageResourceInfo structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"