Newer
Older
tosca_definitions_version: tosca_simple_yaml_1_3
description: ETSI NFV SOL 001 vnfd types definitions version 3.6.1
metadata:
template_name: etsi_nfv_sol001_vnfd_types
template_author: ETSI_NFV
- https://forge.etsi.org/rep/nfv/SOL001/raw/v3.6.1/etsi_nfv_sol001_common_types.yaml
# editor's note: During the development of the SOL001ed361 GS, to enable this file to be verified by a TOSCA parser, the imports statement has to be replaced with a reference to a local copy of the common definitions YAML file
data_types:
tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements:
derived_from: tosca.datatypes.Root
description: Describes requirements on a virtual network interface
properties:
name:
type: string
description: Provides a human readable name for the requirement.
required: false
description:
type: string
description: Provides a human readable description of the requirement.
required: false
network_interface_requirements:
type: map
description: The network interface requirements. A single-element map of strings where the string contains a set of key-value pairs that describes hardware platform specific network interface deployment requirements.
nic_io_requirements:
type: tosca.datatypes.nfv.LogicalNodeData
description: references (couples) the CP with any logical node I/O requirements (for network devices) that may have been created. Linking these attributes is necessary so that so that I/O requirements that need to be articulated at the logical node level can be associated with the network interface requirements associated with the CP.
required: false
tosca.datatypes.nfv.RequestedAdditionalCapability:
derived_from: tosca.datatypes.Root
description: describes requested additional capability for a particular VDU
properties:
requested_additional_capability_name:
type: string
description: Identifies a requested additional capability for the VDU.
required: true
support_mandatory:
type: boolean
description: Indicates whether the requested additional capability is mandatory for successful operation.
required: true
min_requested_additional_capability_version:
type: string
description: Identifies the minimum version of the requested additional capability.
required: false
preferred_requested_additional_capability_version:
type: string
description: Identifies the preferred version of the requested additional capability.
required: false
target_performance_parameters:
type: map
description: Identifies specific attributes, dependent on the requested additional capability type.
required: true
entry_schema:
type: string
tosca.datatypes.nfv.VirtualMemory:
derived_from: tosca.datatypes.Root
description: supports the specification of requirements related to virtual memory of a virtual compute resource
properties:
virtual_mem_size:
type: scalar-unit.size
description: Amount of virtual memory.
required: true
virtual_mem_oversubscription_policy:
type: string
description: The memory core oversubscription policy in terms of virtual memory to physical memory on the platform.
required: false
vdu_mem_requirements:
type: map
description: The hardware platform specific VDU memory requirements. A map of strings where each string contains a set of key-value pairs that describes hardware platform specific VDU memory requirements.
required: false
entry_schema:
type: string
numa_enabled:
type: boolean
description: It specifies the memory allocation to be cognisant of the relevant process/core allocation.
required: true
tosca.datatypes.nfv.VirtualCpu:
derived_from: tosca.datatypes.Root
description: Supports the specification of requirements related to virtual CPU(s) of a virtual compute resource
properties:
cpu_architecture:
type: string
description: CPU architecture type. Examples are x86, ARM
required: false
num_virtual_cpu:
type: integer
description: Number of virtual CPUs
required: true
constraints:
- greater_than: 0
virtual_cpu_clock:
type: scalar-unit.frequency
description: Minimum virtual CPU clock rate
required: false
virtual_cpu_oversubscription_policy:
type: string
description: CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads.
required: false
vdu_cpu_requirements:
type: map
description: The hardware platform specific VDU CPU requirements. A map of strings where each string contains a set of key-value pairs describing VDU CPU specific hardware platform requirements.
required: false
entry_schema:
type: string
virtual_cpu_pinning:
type: tosca.datatypes.nfv.VirtualCpuPinning
description: The virtual CPU pinning configuration for the virtualised compute resource.
required: false
tosca.datatypes.nfv.VirtualCpuPinning:
derived_from: tosca.datatypes.Root
description: Supports the specification of requirements related to the virtual CPU pinning configuration of a virtual compute resource
properties:
virtual_cpu_pinning_policy:
type: string
description: Indicates the policy for CPU pinning. The policy can take values of "static" or "dynamic". In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g. SMT (Simultaneous Multi-Threading) requirements). In case of "static" the allocation is requested to be according to the virtual_cpu_pinning_rule.
required: false
constraints:
- valid_values: [ static, dynamic ]
virtual_cpu_pinning_rule:
type: list
description: Provides the list of rules for allocating virtual CPU cores to logical CPU cores/threads
required: false
entry_schema:
type: string
tosca.datatypes.nfv.VnfcConfigurableProperties:
derived_from: tosca.datatypes.Root
description: Defines the configurable properties of a VNFC
#properties:
# additional_vnfc_configurable_properties:
# type: tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties
# description: Describes additional configuration for VNFC that can be modified using the ModifyVnfInfo operation
# required: false
# derived types are expected to introduce
# additional_vnfc_configurable_properties with its type derived from
# tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties
tosca.datatypes.nfv.VnfcAdditionalConfigurableProperties:
derived_from: tosca.datatypes.Root
description: VnfcAdditionalConfigurableProperties type is an empty base type for deriving data types for describing additional configurable properties for a given VNFC.
tosca.datatypes.nfv.VduProfile:
derived_from: tosca.datatypes.Root
description: describes additional instantiation data for a given Vdu.Compute used in a specific deployment flavour.
properties:
min_number_of_instances:
type: integer
description: Minimum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour.
required: true
constraints:
- greater_or_equal: 0
max_number_of_instances:
type: integer
description: Maximum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour.
required: true
constraints:
- greater_or_equal: 0
nfvi_maintenance_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the impact tolerance and rules to be observed when instance(s) of the Vdu.Compute are impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
tosca.datatypes.nfv.VlProfile:
derived_from: tosca.datatypes.Root
description: Describes additional instantiation data for a given VL used in a specific VNF deployment flavour.
properties:
max_bitrate_requirements:
type: tosca.datatypes.nfv.LinkBitrateRequirements
description: Specifies the maximum bitrate requirements for a VL instantiated according to this profile.
required: true
min_bitrate_requirements:
type: tosca.datatypes.nfv.LinkBitrateRequirements
description: Specifies the minimum bitrate requirements for a VL instantiated according to this profile.
required: true
qos:
type: tosca.datatypes.nfv.Qos
description: Specifies the QoS requirements of a VL instantiated according to this profile.
required: false
virtual_link_protocol_data:
type: list
description: Specifies the protocol data for a virtual link.
required: false
entry_schema:
type: tosca.datatypes.nfv.VirtualLinkProtocolData
tosca.datatypes.nfv.VirtualLinkProtocolData:
derived_from: tosca.datatypes.Root
description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour
properties:
associated_layer_protocol:
description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property.
required: true
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
l2_protocol_data:
type: tosca.datatypes.nfv.L2ProtocolData
description: Specifies the L2 protocol data for a virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise.
l3_protocol_data:
type: tosca.datatypes.nfv.L3ProtocolData
description: Specifies the L3 protocol data for this virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise.
tosca.datatypes.nfv.L2ProtocolData:
derived_from: tosca.datatypes.Root
description: describes L2 protocol data for a given virtual link used in a specific VNF deployment flavour.
properties:
name:
type: string
description: Identifies the network name associated with this L2 protocol.
required: false
network_type:
type: string
description: Specifies the network type for this L2 protocol. The value may be overridden at run-time.
required: false
constraints:
- valid_values: [ flat, vlan, vxlan, gre ]
vlan_transparent:
type: boolean
description: Specifies whether to support VLAN transparency for this L2 protocol or not.
required: true
default: false
mtu:
type: integer
description: Specifies the maximum transmission unit (MTU) value for this L2 protocol.
required: false
constraints:
- greater_than: 0
segmentation_id:
type: string
description: Specifies a specific virtualised network segment, which depends on the network type. For e.g., VLAN ID for VLAN network type and tunnel ID for GRE/VXLAN network types
required: false
tosca.datatypes.nfv.L3ProtocolData:
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
derived_from: tosca.datatypes.Root
description: describes L3 protocol data for a given virtual link used in a specific VNF deployment flavour.
properties:
name:
type: string
description: Identifies the network name associated with this L3 protocol.
required: false
ip_version:
type: string
description: Specifies IP version of this L3 protocol. The value of the ip_version property shall be consistent with the value of the layer_protocol in the connectivity_type property of the virtual link node.
required: true
constraints:
- valid_values: [ ipv4, ipv6 ]
cidr:
type: string
description: Specifies the CIDR (Classless Inter-Domain Routing) of this L3 protocol. The value may be overridden at run-time.
required: true
ip_allocation_pools:
type: list
description: Specifies the allocation pools with start and end IP addresses for this L3 protocol. The value may be overridden at run-time.
required: false
entry_schema:
type: tosca.datatypes.nfv.IpAllocationPool
gateway_ip:
type: string
description: Specifies the gateway IP address for this L3 protocol. The value may be overridden at run-time.
required: false
dhcp_enabled:
type: boolean
description: Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. The value may be overridden at run-time.
required: false
ipv6_address_mode:
type: string
description: Specifies IPv6 address mode. May be present when the value of the ipVersion attribute is "ipv6" and shall be absent otherwise. The value may be overridden at run-time.
required: false
constraints:
- valid_values: [ slaac, dhcpv6-stateful, dhcpv6-stateless ]
tosca.datatypes.nfv.IpAllocationPool:
derived_from: tosca.datatypes.Root
description: Specifies a range of IP addresses
properties:
start_ip_address:
type: string
description: The IP address to be used as the first one in a pool of addresses derived from the cidr block full IP range
required: true
end_ip_address:
type: string
description: The IP address to be used as the last one in a pool of addresses derived from the cidr block full IP range
required: true
tosca.datatypes.nfv.InstantiationLevel:
derived_from: tosca.datatypes.Root
description: Describes the scale level for each aspect that corresponds to a given level of resources to be instantiated within a deployment flavour in term of the number VNFC instances
properties:
description:
type: string
description: Human readable description of the level
required: true
scale_info:
type: map # key: aspectId
description: Represents for each aspect the scale level that corresponds to this instantiation level. scale_info shall be present if the VNF supports scaling.
required: false
entry_schema:
type: tosca.datatypes.nfv.ScaleInfo
tosca.datatypes.nfv.VduLevel:
derived_from: tosca.datatypes.Root
description: Indicates for a given Vdu.Compute in a given level the number of instances to deploy
properties:
number_of_instances:
type: integer
description: Number of instances of VNFC based on this VDU to deploy for this level.
required: true
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.VnfLcmOperationsConfiguration:
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
derived_from: tosca.datatypes.Root
description: Represents information to configure lifecycle management operations
properties:
instantiate:
type: tosca.datatypes.nfv.VnfInstantiateOperationConfiguration
description: Configuration parameters for the InstantiateVnf operation
required: false
scale:
type: tosca.datatypes.nfv.VnfScaleOperationConfiguration
description: Configuration parameters for the ScaleVnf operation
required: false
scale_to_level:
type: tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration
description: Configuration parameters for the ScaleVnfToLevel operation
required: false
change_flavour:
type: tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration
description: Configuration parameters for the changeVnfFlavourOpConfig operation
required: false
heal:
type: tosca.datatypes.nfv.VnfHealOperationConfiguration
description: Configuration parameters for the HealVnf operation
required: false
terminate:
type: tosca.datatypes.nfv.VnfTerminateOperationConfiguration
description: Configuration parameters for the TerminateVnf operation
required: false
operate:
type: tosca.datatypes.nfv.VnfOperateOperationConfiguration
description: Configuration parameters for the OperateVnf operation
required: false
change_ext_connectivity:
type: tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration
description: Configuration parameters for the changeExtVnfConnectivityOpConfig operation
required: false
change_current_package:
type: tosca.datatypes.nfv.VnfChangeCurrentPackageOperationConfiguration
description: Configuration parameters for the ChangeCurrentVnfPackage operation
required: false
# derived types are expected to introduce new properties, with their type derived from
# tosca.datatypes.nfv.VnfChangeCurrentPackageOperationConfiguration,
# with the same name as the operation designated to the ChangeCurrentVnfPackage request
create_snapshot:
type: tosca.datatypes.nfv.VnfCreateSnapshotOperationConfiguration
description: Configuration parameters for the CreateVnfSnapshot operation
required: false
revert_to_snapshot:
type: tosca.datatypes.nfv.VnfRevertToSnapshotOperationConfiguration
description: Configuration parameters for the RevertToVnfSnapshot operation
required: false
tosca.datatypes.nfv.VnfInstantiateOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the InstantiateVnf operation.
# This data type definition is reserved for future use in the present document.
# properties:
tosca.datatypes.nfv.VnfScaleOperationConfiguration:
derived_from: tosca.datatypes.Root
description: Represents information that affect the invocation of the ScaleVnf operation
properties:
scaling_by_more_than_one_step_supported:
type: boolean
description: Signals whether passing a value larger than one in the numScalingSteps parameter of the ScaleVnf operation is supported by this VNF.
required: true
tosca.datatypes.nfv.VnfScaleToLevelOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the ScaleVnfToLevel operation
properties:
arbitrary_target_levels_supported:
type: boolean
description: Signals whether scaling according to the parameter "scaleInfo" is supported by this VNF
required: true
tosca.datatypes.nfv.VnfHealOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the HealVnf operation
properties:
causes:
type: list
description: Supported "cause" parameter values
required: false
entry_schema:
type: string
tosca.datatypes.nfv.VnfTerminateOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the TerminateVnf
properties:
min_graceful_termination_timeout:
type: scalar-unit.time
description: Minimum timeout value for graceful termination of a VNF instance
required: true
max_recommended_graceful_termination_timeout:
type: scalar-unit.time
description: Maximum recommended timeout value that can be needed to gracefully terminate a VNF instance of a particular type under certain conditions, such as maximum load condition. This is provided by VNF provider as information for the operator facilitating the selection of optimal timeout value. This value is not used as constraint
required: false
tosca.datatypes.nfv.VnfOperateOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the OperateVnf operation
properties:
min_graceful_stop_timeout:
type: scalar-unit.time
description: Minimum timeout value for graceful stop of a VNF instance
required: true
max_recommended_graceful_stop_timeout:
type: scalar-unit.time
description: Maximum recommended timeout value that can be needed to gracefully stop a VNF instance of a particular type under certain conditions, such as maximum load condition. This is provided by VNF provider as information for the operator facilitating the selection of optimal timeout value. This value is not used as constraint
required: false
tosca.datatypes.nfv.ScaleInfo:
derived_from: tosca.datatypes.Root
description: Indicates for a given scaleAspect the corresponding scaleLevel
properties:
scale_level:
type: integer
description: The scale level for a particular aspect
required: true
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.ScalingAspect:
derived_from: tosca.datatypes.Root
description: describes the details of an aspect used for horizontal scaling
properties:
name:
type: string
description: Human readable name of the aspect
required: true
description:
type: string
description: Human readable description of the aspect
required: true
max_scale_level:
type: integer # positiveInteger
description: Total number of scaling steps that can be applied w.r.t. this aspect. The value of this property corresponds to the number of scaling steps can be applied to this aspect when scaling it from the minimum scale level (i.e. 0) to the maximum scale level defined by this property
required: true
constraints:
- greater_or_equal: 0
step_deltas:
type: list
description: List of scaling deltas to be applied for the different subsequent scaling steps of this aspect. The first entry in the array shall correspond to the first scaling step (between scale levels 0 to 1) and the last entry in the array shall correspond to the last scaling step (between maxScaleLevel-1 and maxScaleLevel)
required: false
entry_schema:
type: string # Identifier
tosca.datatypes.nfv.VnfConfigurableProperties:
derived_from: tosca.datatypes.Root
description: indicates configuration properties for a given VNF (e.g. related to auto scaling and auto healing).
properties:
is_autoscale_enabled:
type: boolean
description: It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality. If the property is not present, then configuring this VNF property is not supported
required: false
is_autoheal_enabled:
type: boolean
description: It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality. If the property is not present, then configuring this VNF property is not supported
required: false
vnfm_interface_info:
description: Contains information enabling access to the NFV-MANO interfaces produced by the VNFM (e.g. URIs and credentials), If the property is not present, then configuring this VNF property is not supported.
required: false
entry_schema:
type: tosca.datatypes.nfv.VnfmInterfaceInfo
vnfm_oauth_server_info:
type: tosca.datatypes.nfv.OauthServerInfo
description: Contains information to enable discovery of the authorization server protecting access to VNFM interfaces. If the property is not present, then configuring this VNF property is not supported.
required: false
vnf_oauth_server_info:
type: tosca.datatypes.nfv.OauthServerInfo
description: Contains information to enable discovery of the authorization server to validate the access tokens provided by the VNFM when the VNFM accesses the VNF interfaces, if that functionality (token introspection) is supported by the authorization server. If the property is not present, then configuring this VNF property is not supported.
required: false
# additional_configurable_properties:
# description: It provides VNF specific configurable properties that can be
# modified using the ModifyVnfInfo operation
# required: false
# type: tosca.datatypes.nfv.VnfAdditionalConfigurableProperties
# derived types are expected to introduce
# additional_configurable_properties with its type derived from
# tosca.datatypes.nfv.VnfAdditionalConfigurableProperties
tosca.datatypes.nfv.VnfAdditionalConfigurableProperties:
derived_from: tosca.datatypes.Root
description: is an empty base type for deriving data types for describing additional configurable properties for a given VNF
properties:
is_writable_anytime:
type: boolean
description: It specifies whether these additional configurable properties are writeable (TRUE) at any time (i.e. prior to / at instantiation time as well as after instantiation).or (FALSE) only prior to / at instantiation time. If this property is not present, the additional configurable properties are writable anytime.
required: true
default : true
tosca.datatypes.nfv.VnfInfoModifiableAttributes:
derived_from: tosca.datatypes.Root
description: Describes VNF-specific extension and metadata for a given VNF
#properties:
#extensions:
#type: tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions
#description: "Extension" properties of VnfInfo that are writeable
#required: false
# derived types are expected to introduce
# extensions with its type derived from
# tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions
#metadata:
#type: tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata
#description: "Metadata" properties of VnfInfo that are writeable
#required: false
# derived types are expected to introduce
# metadata with its type derived from
# tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata
tosca.datatypes.nfv.VnfInfoModifiableAttributesExtensions:
derived_from: tosca.datatypes.Root
description: is an empty base type for deriving data types for describing VNF-specific extension
tosca.datatypes.nfv.VnfInfoModifiableAttributesMetadata:
derived_from: tosca.datatypes.Root
description: is an empty base type for deriving data types for describing VNF-specific metadata
tosca.datatypes.nfv.LogicalNodeData:
derived_from: tosca.datatypes.Root
description: Describes compute, memory and I/O requirements associated with a particular VDU.
properties:
logical_node_requirements:
type: map
description: The logical node-level compute, memory and I/O requirements. A map of strings where each string contains a set of key-value pairs that describes hardware platform specific deployment requirements, including the number of CPU cores on this logical node, a memory configuration specific to a logical node or a requirement related to the association of an I/O device with the logical node.
required: false
entry_schema:
type: string
tosca.datatypes.nfv.SwImageData:
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
derived_from: tosca.datatypes.Root
description: describes information related to a software image artifact
properties:
name:
type: string
description: Name of this software image
required: true
version:
type: string
description: Version of this software image
required: true
provider:
type: string
description: Provider of this software image
required: false
checksum:
type: tosca.datatypes.nfv.ChecksumData
description: Checksum of the software image file
required: true
container_format:
type: string
description: The container format describes the container file format in which software image is provided
required: true
constraints:
- valid_values: [ aki, ami, ari, bare, docker, ova, ovf ]
disk_format:
type: string
description: The disk format of a software image is the format of the underlying disk image
required: true
constraints:
- valid_values: [ aki, ami, ari, iso, qcow2, raw, vdi, vhd, vhdx, vmdk ]
min_disk:
type: scalar-unit.size # Number
description: The minimal disk size requirement for this software image
required: true
constraints:
- greater_or_equal: 0 B
min_ram:
type: scalar-unit.size # Number
description: The minimal RAM requirement for this software image
required: false
constraints:
- greater_or_equal: 0 B
size:
type: scalar-unit.size # Number
description: The size of this software image
required: true
operating_system:
type: string
description: Identifies the operating system used in the software image
required: false
supported_virtualisation_environments:
type: list
description: Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image
required: false
entry_schema:
type: string
tosca.datatypes.nfv.VirtualBlockStorageData:
derived_from: tosca.datatypes.Root
description: VirtualBlockStorageData describes block storage requirements associated with compute resources in a particular VDU, either as a local disk or as virtual attached storage
properties:
size_of_storage:
type: scalar-unit.size
description: Size of virtualised storage resource
required: true
constraints:
- greater_or_equal: 0 B
vdu_storage_requirements:
type: map
description: The hardware platform specific storage requirements. A map of strings where each string contains a set of key-value pairs that represents the hardware platform specific storage deployment requirements
required: false
entry_schema:
type: string
rdma_enabled:
type: boolean
description: Indicates if the storage support RDMA
required: true
tosca.datatypes.nfv.VirtualObjectStorageData:
derived_from: tosca.datatypes.Root
description: VirtualObjectStorageData describes object storage requirements associated with compute resources in a particular VDU
properties:
max_size_of_storage:
type: scalar-unit.size
description: Maximum size of virtualized storage resource
required: false
constraints:
- greater_or_equal: 0 B
tosca.datatypes.nfv.VirtualFileStorageData:
derived_from: tosca.datatypes.Root
description: VirtualFileStorageData describes file storage requirements associated with compute resources in a particular VDU
properties:
size_of_storage:
type: scalar-unit.size
description: Size of virtualized storage resource
required: true
constraints:
- greater_or_equal: 0 B
file_system_protocol:
type: string
description: The shared file system protocol (e.g. NFS, CIFS)
required: true
tosca.datatypes.nfv.VirtualLinkBitrateLevel:
derived_from: tosca.datatypes.Root
description: Describes bitrate requirements applicable to the virtual link instantiated from a particicular VnfVirtualLink
properties:
bitrate_requirements:
type: tosca.datatypes.nfv.LinkBitrateRequirements
description: Virtual link bitrate requirements for an instantiation level or bitrate delta for a scaling step
required: true
tosca.datatypes.nfv.VnfOperationAdditionalParameters:
derived_from: tosca.datatypes.Root
description: Is an empty base type for deriving data type for describing VNF-specific parameters to be passed when invoking lifecycle management operations
tosca.datatypes.nfv.VnfChangeFlavourOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the ChangeVnfFlavour operation
# This data type definition is reserved for future use in the present document.
# properties:
tosca.datatypes.nfv.VnfChangeExtConnectivityOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the ChangeExtVnfConnectivity operation
# This data type definition is reserved for future use in the present document.
# properties:
tosca.datatypes.nfv.VnfcMonitoringParameter:
derived_from: tosca.datatypes.Root
description: Represents information on virtualised resource related performance metrics applicable to the VNF.
properties:
name:
type: string
description: Human readable name of the monitoring parameter
required: true
type: string
description: Identifies a performance metric to be monitored, according to ETSI GS NFV-IFA 027.
required: true
constraints:
- valid_values: [ v_cpu_usage_mean_vnf, v_cpu_usage_peak_vnf, v_memory_usage_mean_vnf, v_memory_usage_peak_vnf, v_disk_usage_mean_vnf, v_disk_usage_peak_vnf, byte_incoming_vnf_int_cp, byte_outgoing_vnf_int_cp, packet_incoming_vnf_int_cp, packet_outgoing_vnf_int_cp, v_cpu_usage_mean, v_cpu_usage_peak,v_memory_usage_mean,v_memory_usage_peak, v_disk_usage_mean, v_disk_usage_peak, v_net_byte_incoming, v_net_byte_outgoing, v_net_packet_incoming, v_net_packet_outgoing, usage_mean_vStorage, usage_peak_vStorage ]
type: scalar-unit.time
description: Describes the periodicity at which to collect the performance information.
required: false
constraints:
- greater_than: 0 s
tosca.datatypes.nfv.VirtualLinkMonitoringParameter:
derived_from: tosca.datatypes.Root
description: Represents information on virtualised resource related performance metrics applicable to the VNF.
properties:
name:
type: string
description: Human readable name of the monitoring parameter
required: true
type: string
description: Identifies a performance metric to be monitored.
required: true
constraints:
- valid_values: [ byte_incoming, byte_outgoing, packet_incoming, packet_outgoing ]
type: scalar-unit.time
description: Describes the periodicity at which to collect the performance information.
required: false
constraints:
- greater_than: 0 s
derived_from: tosca.datatypes.Root
description: information used to access an interface exposed by a VNF
uri_components:
type: tosca.datatypes.nfv.UriComponents
description: Provides components to build a Uniform Ressource Identifier (URI) where to access the interface end point.
required: false
interface_specific_data:
type: map
description: Provides additional details that are specific to the type of interface considered.
required: false
entry_schema:
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
tosca.datatypes.nfv.UriComponents:
derived_from: tosca.datatypes.Root
description: information used to build a URI that complies with IETF RFC 3986 [8].
properties:
scheme:
type: string # shall comply with IETF RFC 3986
description: scheme component of a URI.
required: true
authority:
type: tosca.datatypes.nfv.UriAuthority
description: Authority component of a URI
required: false
path:
type: string # shall comply with IETF RFC 3986
description: path component of a URI.
required: false
query:
type: string # shall comply with IETF RFC 3986
description: query component of a URI.
required: false
fragment:
type: string # shall comply with IETF RFC 3986
description: fragment component of a URI.
required: false
tosca.datatypes.nfv.UriAuthority:
derived_from: tosca.datatypes.Root
description: information that corresponds to the authority component of a URI as specified in IETF RFC 3986 [8]
properties:
user_info:
type: string # shall comply with IETF RFC 3986
description: user_info field of the authority component of a URI
required: false
host:
type: string # shall comply with IETF RFC 3986
description: host field of the authority component of a URI
required: false
port:
type: string # shall comply with IETF RFC 3986
description: port field of the authority component of a URI
required: false
tosca.datatypes.nfv.ChecksumData:
derived_from: tosca.datatypes.Root
description: Describes information about the result of performing a checksum operation over some arbitrary data
properties:
algorithm:
type: string
description: Describes the algorithm used to obtain the checksum value
required: true
constraints:
- valid_values: [sha-224, sha-256, sha-384, sha-512 ]
hash:
type: string
description: Contains the result of applying the algorithm indicated by the algorithm property to the data to which this ChecksumData refers
required: true
tosca.datatypes.nfv.VnfmInterfaceInfo:
derived_from: tosca.datatypes.Root
description: describes information enabling the VNF instance to access the NFV-MANO interfaces produced by the VNFM
interface_name:
type: string
description: Identifies an interface produced by the VNFM.
required: true
constraints:
- valid_values: [ vnf_lcm, vnf_pm, vnf_fm ]
details:
type: tosca.datatypes.nfv.InterfaceDetails
description: Provide additional data to access the interface endpoint
required: false
credentials:
description: Provides credential enabling access to the interface
required: false
entry_schema:
type: string
derived_from: tosca.datatypes.Root
description: information to enable discovery of the authorization server
#properties: FFS
#This data type definition is reserved for future use in the present document
tosca.datatypes.nfv.BootData:
derived_from: tosca.datatypes.Root
description: describes the information used to customize a virtualised compute resource at boot time.
vim_specific_properties:
type: tosca.datatypes.nfv.BootDataVimSpecificProperties
description: Properties used for selecting VIM specific capabilities when setting the boot data.
kvp_data:
type: tosca.datatypes.nfv.KvpData
description: A set of key-value pairs for configuring a virtual compute resource.
content_or_file_data:
type: tosca.datatypes.nfv.ContentOrFileData
description: A string content or a file for configuring a virtual compute resource.
tosca.datatypes.nfv.KvpData:
derived_from: tosca.datatypes.Root
description: describes a set of key-value pairs information used to customize a virtualised compute resource at boot time by using only key-value pairs data.
properties:
data:
type: map
description: A map of strings that contains a set of key-value pairs that describes the information for configuring the virtualised compute resource.
derived_from: tosca.datatypes.Root
description: describes a string content or a file information used to customize a virtualised compute resource at boot time by using string content or file.
data:
type: map
description: A map of strings that contains a set of key-value pairs that carries the dynamic deployment values which used to replace the corresponding variable parts in the file as identify by a URL as described in source_path. Shall be present if "source_path" is present and shall be absent otherwise..
required: false
entry_schema:
type: string
content:
type: string
description: The string information used to customize a virtualised compute resource at boot time.
source_path:
type: string
description: The URL to a file contained in the VNF package used to customize a virtualised compute resource. The content shall comply with IETF RFC 3986 [8].
destination_path:
type: string
description: The URL address when inject a file into the virtualised compute resource. The content shall comply with IETF RFC 3986 [8].
tosca.datatypes.nfv.BootDataVimSpecificProperties:
derived_from: tosca.datatypes.Root
description: describes the VIM specific information used for selecting VIM specific capabilities when setting the boot data.
vim_type:
type: string
description: Discriminator for the different types of the VIM information.
properties:
type: map
description: Properties used for selecting VIM specific capabilities when setting the boot data
entry_schema:
type: string
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
tosca.datatypes.nfv.VnfPackageChangeSelector:
derived_from: tosca.datatypes.Root
description: data type describes the source and destination VNFDs as well as source deployment flavour for a change current VNF Package.
properties:
source_descriptor_id:
type: string
description: Identifier of the source VNFD and the source VNF package.
required: true
destination_descriptor_id:
type: string
description: Identifier of the destination VNFD and the destination VNF package.
required: true
source_flavour_id:
type: string
description: Identifier of the deployment flavour in the source VNF package for which this data type applies.
required: true
tosca.datatypes.nfv.VnfPackageChangeComponentMapping:
derived_from: tosca.datatypes.Root
description: A mapping between the identifier of a components or property in the source VNFD and the identifier of the corresponding component or property in the destination VNFD.
properties:
component_type:
type: string
description: The type of component or property. Possible values differentiate whether changes concern to some VNF component (e.g. VDU, internal VLD, etc.) or property (e.g. a Scaling Aspect, etc.).
constraints:
- valid_values: [ vdu, cp, virtual_link, virtual_storage, deployment_flavour, instantiation_level, scaling_aspect ]
required: true
source_id:
type: string
description: Identifier of the component or property in the source VNFD.
required: true
destination_id:
type: string
description: Identifier of the component or property in the destination VNFD.
required: true
description:
type: string
description: Human readable description of the component changes.
required: false
tosca.datatypes.nfv.VnfChangeCurrentPackageOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the change current VNF Package operation.
# This data type definition is reserved for future use in the present document.
# properties:
# derived types are expected to introduce new properties, with their type derived from tosca.datatypes.nfv.VnfChangeCurrentPackageOperationConfiguration, with the same name as the operation designated to the ChangeCurrentVnfPackage request
tosca.datatypes.nfv.VnfCreateSnapshotOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the CreateVnfSnapshot operation
# This data type definition is reserved for future use in the present document.
# properties:
tosca.datatypes.nfv.VnfRevertToSnapshotOperationConfiguration:
derived_from: tosca.datatypes.Root
description: represents information that affect the invocation of the RevertToVnfSnapshot operation
# This data type definition is reserved for future use in the present document.
# properties:
tosca.datatypes.nfv.VnfLcmOpCoord:
derived_from: tosca.datatypes.Root
description: describes a set of information used for a coordination action in a VNF lifecycle management operation for a given VNF.
properties:
description:
type: string
description: Human readable description of the coordination action.
required: false
endpoint_type:
type: string
description: Specifies the type of the endpoint exposing the LCM operation coordination such as other operations supporting or management systems (e.g. an EM) or the VNF instance. If the VNF produces the LCM coordination interface, this property may be omitted or may have the value "vnf". If this attribute is omitted, the type of endpoint that provides the interface is determined at deployment time. If the VNF does not produce the LCM coordination interface but coordination via this interface is needed, it is expected that a management entity such as the EM exposes the coordination interface, and consequently, this attribute shall be present and shall have the value “mgmt�
required: false
constraints:
- valid_values: [ mgmt, vnf ]
coordination_stage:
type: string
description: Indicates whether the coordination action is invoked before or after all other changes performed by the VNF LCM operation. coordination_stage property shall be omitted if the coordination action is intended to be invoked at an intermediate stage of the LCM operation, i.e. neither at the start nor at the end. In this case, the time at which to invoke the coordination during the execution of the LCM operation is determined by means outside the scope of the present document such as VNFM-internal logic or LCM script.
required: false
constraints:
- valid_values: [ start, end ]
# input_parameters:
# type: tosca.datatypes.nfv.InputOpCoordParams
# description: Input parameters to be provided in the LCM coordination request.
# required: false
# output_parameters:
# type: tosca.datatypes.nfv.OutputOpCoordParams
# description: Output parameters provided in the LCM coordination response.
# required: false
tosca.datatypes.nfv.OutputOpCoordParams:
derived_from: tosca.datatypes.Root
description: is an empty base type for deriving data types for describing additional Output operation coordination parameters for a given coordination action
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
tosca.datatypes.nfv.MaxNumberOfImpactedInstances:
derived_from: tosca.datatypes.Root
description: Specifies the maximum number of instances of a given Vdu.Compute node or VnfVirtualLink node that may be impacted simultaneously without impacting the functionality of the group of a given size.
properties:
group_size:
type: integer
description: Determines the size of the group for which the max_number_of_impacted_instances is specified. If not present the size is not limited.
required: false
max_number_of_impacted_instances:
type: integer
description: The maximum number of instances that can be impacted simultaneously within the group of the specified size.
required: true
tosca.datatypes.nfv.NfviMaintenanceInfo:
derived_from: tosca.datatypes.Root
description: Provides information related to the constraints and rules applicable to virtualised resources and their groups impacted due to NFVI maintenance operations
properties:
impact_notification_lead_time:
type: scalar-unit.time
description: Specifies the minimum notification lead time requested for upcoming impact of the virtualised resource or their group (i.e. between the notification and the action causing the impact).
required: true
is_impact_mitigation_requested:
type: boolean
description: Indicates whether it is requested that at the time of the notification of an upcoming change that is expected to have an impact on the VNF, virtualised resource(s) of the same characteristics as the impacted ones is/are provided to compensate for the impact (TRUE) or not (FALSE).
required: true
default: false
supported_migration_type:
type: list
description: Specifies the allowed migration types in the order of preference in case of an impact starting with the most preferred type. It is applicable to the Vdu.Compute node and to the VirtualBlockStorage, VirtualObjectStorage and VirtualFileStorage nodes.
required: false
entry_schema:
type: string
constraints:
- valid_values: [ no_migration, offline_migration, live_migration ]
max_undetectable_interruption_time:
type: scalar-unit.time
description: Specifies the maximum interruption time that can go undetected at the VNF level and therefore which will not trigger VNF-internal recovery during live migration. It is applicable to the Vdu.Compute node and to the VirtualBlockStorage, VirtualObjectStorage and VirtualFileStorage nodes.
required: false
min_recovery_time_between_impacts:
type: scalar-unit.time
description: Specifies the time required by the group to recover from an impact, thus, the minimum time requested between consecutive impacts of the group..
required: false
max_number_of_impacted_instances:
type: list
description: Specifies for different group sizes the maximum number of instances that can be impacted simultaneously within the group of virtualised resources without losing functionality.
required: false
entry_schema:
type: tosca.datatypes.nfv.MaxNumberOfImpactedInstances
min_number_of_preserved_instances:
type: list
description: Specifies for different group sizes the minimum number of instances which need to be preserved simultaneously within the group of virtualised resources.
required:false
entry_schema:
type: tosca.datatypes.nfv.MinNumberOfPreservedInstances
tosca.datatypes.nfv.MinNumberOfPreservedInstances:
derived_from: tosca.datatypes.Root
description: Specifies the minimum number of instances of a given Vdu.Compute node or VnfVirtualLink node which need to be preserved simultaneously.
properties:
group_size:
type: integer
description: Determines the size of the group for which the min_number_of_preserved_instances is specified. If not present the size is not limited.
required: false
min_number_of_preserved_instances:
type: integer
description: The minimum number of instances which need to be preserved simultaneously within the group of the specified size.
required: true
artifact_types:
tosca.artifacts.nfv.SwImage:
derived_from: tosca.artifacts.Deployment.Image
description: describes the software image which is directly loaded on the virtualisation container realizing of the VDU or is to be loaded on a virtual storage resource
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
properties:
name:
type: string
description: Name of this software image
required: true
version:
type: string
description: Version of this software image
required: true
provider:
type: string
description: Provider of this software image
required: false
checksum:
type: tosca.datatypes.nfv.ChecksumData
description: Checksum of the software image file
required: true
container_format:
type: string
description: The container format describes the container file format in which software image is provided
required: true
constraints:
- valid_values: [ aki, ami, ari, bare, docker, ova, ovf ]
disk_format:
type: string
description: The disk format of a software image is the format of the underlying disk image
required: true
constraints:
- valid_values: [ aki, ami, ari, iso, qcow2, raw, vdi, vhd, vhdx, vmdk ]
min_disk:
type: scalar-unit.size # Number
description: The minimal disk size requirement for this software image
required: true
constraints:
- greater_or_equal: 0 B
min_ram:
type: scalar-unit.size # Number
description: The minimal RAM requirement for this software image
required: false
constraints:
- greater_or_equal: 0 B
size:
type: scalar-unit.size # Number
description: The size of this software image
required: true
operating_system:
type: string
description: Identifies the operating system used in the software image
required: false
supported_virtualisation_environments:
type: list
description: Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image
required: false
entry_schema:
type: string
tosca.artifacts.Implementation.nfv.Mistral:
derived_from: tosca.artifacts.Implementation
description: artifacts for Mistral workflows
mime_type: application/x-yaml
file_ext: [ yaml ]
capability_types:
tosca.capabilities.nfv.VirtualBindable:
derived_from: tosca.capabilities.Node
description: Indicates that the node that includes it can be pointed by a tosca.relationships.nfv.VirtualBindsTo relationship type which is used to model the VduHasCpd association
tosca.capabilities.nfv.VirtualCompute:
derived_from: tosca.capabilities.Node
description: Describes the capabilities related to virtual compute resources
properties:
logical_node:
type: map
description: Describes the Logical Node requirements
required: false
entry_schema:
type: tosca.datatypes.nfv.LogicalNodeData
requested_additional_capabilities:
type: map
description: Describes additional capability for a particular VDU
required: false
entry_schema:
type: tosca.datatypes.nfv.RequestedAdditionalCapability
type: map
required: false
entry_schema:
type: string
type: tosca.datatypes.nfv.VirtualMemory
description: Describes virtual memory of the virtualized compute
required: true
type: tosca.datatypes.nfv.VirtualCpu
description: Describes virtual CPU(s) of the virtualized compute
required: true
type: list
description: A list of virtual system disks created and destroyed as part of the VM lifecycle
required: false
entry_schema:
type: tosca.datatypes.nfv.VirtualBlockStorageData
description: virtual system disk definition
tosca.capabilities.nfv.VirtualStorage:
derived_from: tosca.capabilities.Root
description: Describes the attachment capabilities related to Vdu.Storage
tosca.capabilities.nfv.TrunkBindable:
derived_from: tosca.capabilities.Node
description: Indicates that the node that includes it can be pointed by a tosca.relationships.nfv.TrunkBindsTo relationship type which is used to model the trunkPortTopology.
relationship_types:
tosca.relationships.nfv.VirtualBindsTo:
derived_from: tosca.relationships.DependsOn
description: Represents an association relationship between Vdu.Compute and VduCp node types
valid_target_types: [ tosca.capabilities.nfv.VirtualBindable ]
tosca.relationships.nfv.AttachesTo:
derived_from: tosca.relationships.Root
description: Represents an association relationship between the Vdu.Compute and one of the node types, Vdu.VirtualBlockStorage, Vdu.VirtualObjectStorage or Vdu.VirtualFileStorage
valid_target_types: [ tosca.capabilities.nfv.VirtualStorage ]
tosca.relationships.nfv.TrunkBindsTo:
derived_from: tosca.relationships.DependsOn
description: Represents the association relationship between a VduCp node used as a trunk port and other VduSubCp nodes used as subports of the same trunk.
valid_target_types: [ tosca.capabilities.nfv.TrunkBindable ]
interface_types:
tosca.interfaces.nfv.Vnflcm:
derived_from: tosca.interfaces.Root
description: This interface encompasses a set of TOSCA operations corresponding to the VNF LCM operations defined in ETSI GS NFV-IFA 007 as well as to preamble and postamble procedures to the execution of the VNF LCM operations.
operations:
instantiate:
description: Invoked upon receipt of an Instantiate VNF request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
instantiate_start:
description: Invoked before instantiate
instantiate_end:
description: Invoked after instantiate
terminate:
description: Invoked upon receipt Terminate VNF request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
terminate_start:
description: Invoked before terminate
terminate_end:
description: Invoked after terminate
modify_information:
description: Invoked upon receipt of a Modify VNF Information request
modify_information_start:
description: Invoked before modify_information
modify_information_end:
description: Invoked after modify_information
change_flavour:
description: Invoked upon receipt of a Change VNF Flavour request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
change_flavour_start:
description: Invoked before change_flavour
change_flavour_end:
description: Invoked after change_flavour
change_external_connectivity:
description: Invoked upon receipt of a Change External VNF Connectivity request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
change_external_connectivity_start:
description: Invoked before change_external_connectivity
change_external_connectivity_end:
description: Invoked after change_external_connectivity
operate:
description: Invoked upon receipt of an Operate VNF request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
operate_start:
description: Invoked before operate
operate_end:
description: Invoked after operate
heal:
description: Invoked upon receipt of a Heal VNF request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
inputs:
cause:
type: string
description: Indicates the reason why a healing procedure is required.
required: false
vnfc_instance_ids:
type: list
entry_schema:
type: string
description: List of VNFC instances requiring a healing action.
required: false
heal_start:
description: Invoked before heal
heal_end:
description: Invoked after heal
scale:
description: Invoked upon receipt of a Scale VNF request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
inputs:
type:
type: string
description: Indicates the type of the scale operation requested.
required: false
constraints:
- valid_values: [ scale_out, scale_in ]
aspect:
type: string
description: Identifier of the scaling aspect.
required: false
number_of_steps:
type: integer
description: Number of scaling steps to be executed.
required: true
constraints:
- greater_than: 0
default: 1
scale_start:
description: Invoked before scale
scale_end:
description: Invoked after scale
scale_to_level:
description: Invoked upon receipt of a Scale VNF to Level request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
inputs:
instantiation_level:
type: string
description: Identifier of the target instantiation level of the current deployment flavour to which the VNF is requested to be scaled. Either instantiation_level or scale_info shall be provided.
required: false
scale_info:
type: map # key: aspectId
description: For each scaling aspect of the current deployment flavour, indicates the target scale level to which the VNF is to be scaled. Either instantiation_level or scale_info shall be provided.
required: false
entry_schema:
type: tosca.datatypes.nfv.ScaleInfo
scale_to_level_start:
description: Invoked before scale_to_level
scale_to_level_end:
description: Invoked after scale_to_level
create_snapshot:
description: Invoked upon receipt of a Create VNF snapshot request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
create_snapshot_start:
description: Invoked before create_snapshot
create_snapshot_end:
description: Invoked after create_snapshot
revert_to_snapshot:
description: Invoked upon receipt of a Revert to VNF snapshot request
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
revert_to_snapshot_start:
description: Invoked before revert_to_snapshot
revert_to_snapshot_end:
description: Invoked after revert_to_snapshot
change_current_package:
description: Invoked by tosca.policies.nfv.VnfPackageChange
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
change_current_package_start:
description: Invoked by tosca.policies.nfv.VnfPackageChange
change_current_package_end:
description: Invoked by tosca.policies.nfv.VnfPackageChange
notifications:
change_current_package_notification:
description: Invoked upon receipt of a ChangeCurrentVnfPackage request
change_current_package_start_notification:
description: Invoked before the operation designated to changing the current VNF package
change_current_package_end_notification:
description: Invoked after the operation designated to changing the current VNF package
derived_from: tosca.interfaces.Root
description: This interface is an empty base interface type for deriving VNF specific interface types that include VNF indicator specific notifications.
tosca.interfaces.nfv.ChangeCurrentVnfPackage:
derived_from: tosca.interfaces.Root
description: This interface is an empty base interface type for deriving VNF specific interface types that include VNF Change Current VNF Package specific operation.
# operations:
# operation_name: name of a VNF-specific operation serving the Change current VNF Package request.
# description: Invoked by tosca.policies.nfv.VnfPackageChange
# inputs:
# additional_parameters:
# type: tosca.datatypes.nfv.VnfOperationAdditionalParameters
# required: false
# derived types are expected to introduce additional_parameters with its
# type derived from tosca.datatypes.nfv.VnfOperationAdditionalParameters
node_types:
tosca.nodes.nfv.VNF:
derived_from: tosca.nodes.Root
description: The generic abstract type from which all VNF specific node types shall be derived to form, together with other node types, the TOSCA service template(s) representing the VNFD
properties:
descriptor_id: # instead of vnfd_id
type: string # UUID
description: Identifier of this VNFD information element. This attribute shall be globally unique
required: true
descriptor_version: # instead of vnfd_version
type: string
description: Identifies the version of the VNFD
required: true
provider: # instead of vnf_provider
type: string
description: Provider of the VNF and of the VNFD
required: true
product_name: # instead of vnf_product_name
type: string
description: Human readable name for the VNF Product
required: true
software_version: # instead of vnf_software_version
type: string
description: Software version of the VNF
required: true
product_info_name: # instead of vnf_product_info_name
type: string
description: Human readable name for the VNF Product
required: false
product_info_description: # instead of vnf_product_info_description
type: string
description: Human readable description of the VNF Product
required: false
type: list
required: true
description: Identifies VNFM(s) compatible with the VNF
entry_schema:
type: string
constraints:
- pattern: (^etsivnfm:v[0-9]?[0-9]\.[0-9]?[0-9]\.[0-9]?[0-9]$)|(^[0-9]+:[a-zA-Z0-9.-]+$)
type: list
description: Information about localization languages of the VNF
required: false
entry_schema:
type: string #IETF RFC 5646 string
default_localization_language:
type: string #IETF RFC 5646 string
description: Default localization language that is instantiated if no information about selected localization language is available
required: false
#type: tosca.datatypes.nfv.VnfConfigurableProperties
#description: Describes the configurable properties of the VNF
#required: false
# derived types are expected to introduce configurable_properties
# with its type derived from tosca.datatypes.nfv.VnfConfigurableProperties
#type: tosca.datatypes.nfv.VnfInfoModifiableAttributes
#description: Describes the modifiable attributes of the VNF
#required: false
# derived types are expected to introduce modifiable_attributes
# with its type derived from
# tosca.datatypes.nfv.VnfInfoModifiableAttributes
lcm_operations_configuration:
type: tosca.datatypes.nfv.VnfLcmOperationsConfiguration
description: Describes the configuration parameters for the VNF LCM operations
required: false
type: map # key: id
entry_schema:
type: tosca.datatypes.nfv.VnfMonitoringParameter
description: Describes monitoring parameters applicable to the VNF.
required: false
type: string
description: Identifier of the Deployment Flavour within the VNFD
required: true
type: string
description: Human readable description of the DF
required: true
type: tosca.datatypes.nfv.VnfProfile
description: Describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF
required: false
attributes:
scale_status:
type: map # key: aspectId
description: Scale status of the VNF, one entry per aspect. Represents for every scaling aspect how "big" the VNF has been scaled w.r.t. that aspect.
entry_schema:
type: tosca.datatypes.nfv.ScaleInfo
requirements:
- virtual_link:
capability: tosca.capabilities.nfv.VirtualLinkable
relationship: tosca.relationships.nfv.VirtualLinksTo
occurrences: [ 0, 1 ]
# Additional requirements shall be defined in the VNF specific node type (deriving from tosca.nodes.nfv.VNF) corresponding to NS virtual links that need to connect to VnfExtCps
interfaces:
Vnflcm:
type: tosca.interfaces.nfv.Vnflcm
# VnfIndicator:
# type: tosca.interfaces.nfv.VnfIndicator
# derived types are expected to introduce Vnf Indicator interfaces
# with their type derived from tosca.interfaces.nfv.VnfIndicator
tosca.nodes.nfv.VnfExtCp:
derived_from: tosca.nodes.nfv.Cp
description: Describes a logical external connection point, exposed by the VNF enabling connection with an external Virtual Link
properties:
virtual_network_interface_requirements:
type: list
description: The actual virtual NIC requirements that is been assigned when instantiating the connection point
required: false
entry_schema:
type: tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements
requirements:
- external_virtual_link:
capability: tosca.capabilities.nfv.VirtualLinkable
relationship: tosca.relationships.nfv.VirtualLinksTo
occurrences: [0, 1]
- internal_virtual_link:
capability: tosca.capabilities.nfv.VirtualLinkable
relationship: tosca.relationships.nfv.VirtualLinksTo
tosca.nodes.nfv.Vdu.Compute:
derived_from: tosca.nodes.Root
description: Describes the virtual compute part of a VDU which is a construct supporting the description of the deployment and operational behavior of a VNFC
type: string
description: Human readable name of the VDU
required: true
type: string
description: Human readable description of the VDU
required: true
type: boolean
description: indicates whether the order of the virtual_storage requirements is used as the boot index (the first requirement represents the lowest index and defines highest boot priority)
required: true
default: false
type: map
description: Describes constraints on the NFVI for the VNFC instance(s) created from this VDU. This property is reserved for future use in the present document.
required: false
entry_schema:
type: string
type: map # key: id
description: Describes monitoring parameters applicable to a VNFC instantiated from this VDU
required: false
entry_schema:
type: tosca.datatypes.nfv.VnfcMonitoringParameter
#type: tosca.datatypes.nfv.VnfcConfigurableProperties
#required: false
# derived types are expected to introduce
# configurable_properties with its type derived from
# tosca.datatypes.nfv.VnfcConfigurableProperties
type: tosca.datatypes.nfv.VduProfile
description: Defines additional instantiation data for the VDU.Compute node
required: true
type: tosca.datatypes.nfv.BootData
description: Contains the information used to customize a virtualised compute resource at boot time. The bootData may contain variable parts that are replaced by deployment specific values before being sent to the VIM.
required: false
capabilities:
virtual_compute:
type: tosca.capabilities.nfv.VirtualCompute
occurrences: [ 1, 1 ]
type: tosca.capabilities.nfv.VirtualBindable
occurrences: [ 1, UNBOUNDED ]
requirements:
- virtual_storage:
capability: tosca.capabilities.nfv.VirtualStorage
relationship: tosca.relationships.nfv.AttachesTo
occurrences: [ 0, UNBOUNDED ]
tosca.nodes.nfv.Vdu.VirtualBlockStorage:
derived_from: tosca.nodes.Root
description: This node type describes the specifications of requirements related to virtual block storage resources
properties:
virtual_block_storage_data:
type: tosca.datatypes.nfv.VirtualBlockStorageData
description: Describes the block storage characteristics.
required: true
nfvi_maintenance_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the rules to be observed when an instance based on this VirtualBlockStorage is impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
capabilities:
virtual_storage:
type: tosca.capabilities.nfv.VirtualStorage
description: Defines the capabilities of virtual_storage.
tosca.nodes.nfv.Vdu.VirtualObjectStorage:
derived_from: tosca.nodes.Root
description: This node type describes the specifications of requirements related to virtual object storage resources
properties:
virtual_object_storage_data:
type: tosca.datatypes.nfv.VirtualObjectStorageData
description: Describes the object storage characteristics.
nfvi_maintenance_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the rules to be observed when an instance based on this VirtualObjectStorage is impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
capabilities:
virtual_storage:
type: tosca.capabilities.nfv.VirtualStorage
description: Defines the capabilities of virtual_storage.
tosca.nodes.nfv.Vdu.VirtualFileStorage:
derived_from: tosca.nodes.Root
description: This node type describes the specifications of requirements related to virtual file storage resources
properties:
virtual_file_storage_data:
type: tosca.datatypes.nfv.VirtualFileStorageData
description: Describes the file storage characteristics.
required: true
nfvi_maintenance_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the rules to be observed when an instance based on this VirtualFileStorage is impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
capabilities:
virtual_storage:
type: tosca.capabilities.nfv.VirtualStorage
#description: Defines the capabilities of virtual_storage.
requirements:
- virtual_link:
capability: tosca.capabilities.nfv.VirtualLinkable
relationship: tosca.relationships.nfv.VirtualLinksTo
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
occurrences: [1, 1]
# description: Describes the requirements for linking to virtual link
tosca.nodes.nfv.VduCp:
derived_from: tosca.nodes.nfv.Cp
description: describes network connectivity between a VNFC instance based on this VDU and an internal VL
properties:
bitrate_requirement:
type: integer # in bits per second
description: Bitrate requirement in bit per second on this connection point
required: false
constraints:
- greater_or_equal: 0
virtual_network_interface_requirements:
type: list
description: Specifies requirements on a virtual network interface realising the CPs instantiated from this CPD
required: false
entry_schema:
type: tosca.datatypes.nfv.VirtualNetworkInterfaceRequirements
order:
type: integer
description: The order of the NIC on the compute instance (e.g.eth2)
required: false
constraints:
- greater_or_equal: 0
vnic_type:
type: string
description: Describes the type of the virtual network interface realizing the CPs instantiated from this CPD
required: false
constraints:
- valid_values: [ normal, macvtap, direct, baremetal, virtio-forwarder, direct-physical, smart-nic ]
capabilities:
trunk_binding: # This capability is available only the trunk_mode property value of this VduCp is “true�and there is at least one VduSubCp defined as subport of the same trunk.
type: tosca.capabilities.nfv.TrunkBindable
occurrences: [ 0, UNBOUNDED ]
requirements:
- virtual_link:
capability: tosca.capabilities.nfv.VirtualLinkable
relationship: tosca.relationships.nfv.VirtualLinksTo
occurrences: [1, 1]
- virtual_binding:
capability: tosca.capabilities.nfv.VirtualBindable
relationship: tosca.relationships.nfv.VirtualBindsTo
node: tosca.nodes.nfv.Vdu.Compute
occurrences: [0, 1]
tosca.nodes.nfv.VnfVirtualLink:
derived_from: tosca.nodes.Root
description: Describes the information about an internal VNF VL
properties:
connectivity_type:
type: tosca.datatypes.nfv.ConnectivityType
description: Specifies the protocol exposed by the VL and the flow pattern supported by the VL
required: true
description: Provides human-readable information on the purpose of the VL
required: false
test_access:
type: list
description: Test access facilities available on the VL
required: false
entry_schema:
type: string
constraints:
- valid_values: [ passive_monitoring, active_loopback ]
type: tosca.datatypes.nfv.VlProfile
description: Defines additional data for the VL
required: true
type: map #key: id
entry_schema:
type: tosca.datatypes.nfv.VirtualLinkMonitoringParameter
description: Describes monitoring parameters applicable to the VL
required: false
nfvi_maintenance_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the rules to be observed when an instance based on this VnfVirtualLink is impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
externally_managed:
type: string
description: Specifies the intent of the VNF designer w.r.t. the external management of the internal VL instances created from this descriptor, i.e. whether it is "allowed" or "required" that these are externally managed. If this property is absent, the value "allowed" is assumed. If the VNFD does not reference any LCM script and if the "vnfm_info" property in the VNF-specific node type derived from the "tosca.nodes.nfv.VNF" node type indicates that the VNF can be managed by any ETSI NFV compliant VNFM, this property shall not be present.
required: false
entry_schema:
type: string
constraints:
- valid_values: [ allowed, required ]
capabilities:
virtual_linkable:
type: tosca.capabilities.nfv.VirtualLinkable
tosca.nodes.nfv.VipCp:
derived_from: tosca.nodes.nfv.Cp
description: Describes a connection point to allocate one or a set of virtual IP addresses
properties:
dedicated_ip_address:
type: boolean
description: Indicates whether the VIP address shall be different from the addresses allocated to all associated VduCp instances or shall be the same as one of them.
required: true
default: true
vip_function:
type: string
description: "Indicates the function the virtual IP address is used for: high availability or load balancing. When used for high availability, only one of the internal VDU CP instances or VNF external CP instances that share the virtual IP is bound to the VIP address at a time. When used for load balancing purposes all CP instances that share the virtual IP are bound to it."
required: true
constraints:
- valid_values: [ high_availability, load_balance ]
requirements:
- target:
capability: tosca.capabilities.Node
node: tosca.nodes.nfv.VduCp
relationship: tosca.relationships.DependsOn
occurrences: [ 1, UNBOUNDED ]
- virtual_link:
capability: tosca.capabilities.nfv.VirtualLinkable
relationship: tosca.relationships.nfv.VipVirtualLinksTo
occurrences: [1, 1]
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
tosca.nodes.nfv.VduSubCp:
derived_from: tosca.nodes.nfv.VduCp
description: describes network connectivity between a VNFC instance based on this VDU and an internal VL through a trunk port
properties:
segmentation_type:
type: string
description: Specifies the encapsulation type for the traffics coming in and out of the trunk subport.
required: false
constraints:
- valid_values: [ vlan, inherit ]
segmentation_id:
type: integer
description: Specifies the segmentation ID for the subport, which is used to differentiate the traffics on different networks coming in and out of the trunk port.
required: false
constraints:
- greater_or_equal: 0
requirements:
- trunk_binding:
capability: tosca.capabilities.nfv.TrunkBindable
relationship: tosca.relationships.nfv.TrunkBindsTo
node: tosca.nodes.nfv.VduCp
occurrences: [1, 1]
group_types:
tosca.groups.nfv.PlacementGroup:
derived_from: tosca.groups.Root
description: PlacementGroup is used for describing the affinity or anti-affinity relationship applicable between the virtualization containers to be created based on different VDUs, or between internal VLs to be created based on different VnfVirtualLinkDesc(s)
properties:
description:
type: string
description: Human readable description of the group
required: true
members: [ tosca.nodes.nfv.Vdu.Compute, tosca.nodes.nfv.VnfVirtualLink ]
policy_types:
tosca.policies.nfv.InstantiationLevels:
derived_from: tosca.policies.Root
description: The InstantiationLevels type is a policy type representing all the instantiation levels of resources to be instantiated within a deployment flavour and including default instantiation level in term of the number of VNFC instances to be created as defined in ETSI GS NFV-IFA 011 [1].
properties:
levels:
type: map # key: levelId
description: Describes the various levels of resources that can be used to instantiate the VNF using this flavour.
required: true
entry_schema:
type: tosca.datatypes.nfv.InstantiationLevel
type: string # levelId
description: The default instantiation level for this flavour.
required: false # required if multiple entries in levels
tosca.policies.nfv.VduInstantiationLevels:
derived_from: tosca.policies.Root
description: The VduInstantiationLevels type is a policy type representing all the instantiation levels of resources to be instantiated within a deployment flavour in term of the number of VNFC instances to be created from each vdu.Compute. as defined in ETSI GS NFV-IFA 011 [1]
type: map # key: levelId
description: Describes the Vdu.Compute levels of resources that can be used to instantiate the VNF using this flavour
required: true
entry_schema:
type: tosca.datatypes.nfv.VduLevel
constraints:
- min_length: 1
targets: [ tosca.nodes.nfv.Vdu.Compute ]
tosca.policies.nfv.VirtualLinkInstantiationLevels:
derived_from: tosca.policies.Root
description: The VirtualLinkInstantiationLevels type is a policy type representing all the instantiation levels of virtual link resources to be instantiated within a deployment flavour as defined in ETSI GS NFV-IFA 011 [1].
type: map # key: levelId
description: Describes the virtual link levels of resources that can be used to instantiate the VNF using this flavour.
required: true
entry_schema:
type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
constraints:
- min_length: 1
targets: [ tosca.nodes.nfv.VnfVirtualLink ]
tosca.policies.nfv.ScalingAspects:
derived_from: tosca.policies.Root
description: The ScalingAspects type is a policy type representing the scaling aspects used for horizontal scaling as defined in ETSI GS NFV-IFA 011 [1]
type: map # key: aspectId
description: Describe maximum scale level for total number of scaling steps that can be applied to a particular aspect
required: true
entry_schema:
type: tosca.datatypes.nfv.ScalingAspect
constraints:
- min_length: 1
tosca.policies.nfv.VduScalingAspectDeltas:
derived_from: tosca.policies.Root
description: The VduScalingAspectDeltas type is a policy type representing the Vdu.Compute detail of an aspect deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1]
type: string
description: Represents the scaling aspect to which this policy applies
required: true
type: map # key: scalingDeltaId
description: Describes the Vdu.Compute scaling deltas to be applied for every scaling steps of a particular aspect.
required: true
entry_schema:
type: tosca.datatypes.nfv.VduLevel
constraints:
- min_length: 1
targets: [ tosca.nodes.nfv.Vdu.Compute ]
tosca.policies.nfv.VirtualLinkBitrateScalingAspectDeltas:
derived_from: tosca.policies.Root
description: The VirtualLinkBitrateScalingAspectDeltas type is a policy type representing the VnfVirtualLink detail of an aspect deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
properties:
aspect:
type: string
description: Represents the scaling aspect to which this policy applies.
required: true
type: map # key: scalingDeltaId
description: Describes the VnfVirtualLink scaling deltas to be applied for every scaling steps of a particular aspect.
required: true
entry_schema:
type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
constraints:
- min_length: 1
targets: [ tosca.nodes.nfv.VnfVirtualLink ]
tosca.policies.nfv.VduInitialDelta:
derived_from: tosca.policies.Root
description: The VduInitialDelta type is a policy type representing the Vdu.Compute detail of an initial delta used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
properties:
initial_delta:
type: tosca.datatypes.nfv.VduLevel
description: Represents the initial minimum size of the VNF.
required: true
targets: [ tosca.nodes.nfv.Vdu.Compute ]
tosca.policies.nfv.VirtualLinkBitrateInitialDelta:
derived_from: tosca.policies.Root
description: The VirtualLinkBitrateInitialDelta type is a policy type representing the VnfVirtualLink detail of an initial deltas used for horizontal scaling, as defined in ETSI GS NFV-IFA 011 [1].
properties:
initial_delta:
type: tosca.datatypes.nfv.VirtualLinkBitrateLevel
description: Represents the initial minimum size of the VNF.
required: true
targets: [ tosca.nodes.nfv.VnfVirtualLink ]
tosca.policies.nfv.AffinityRule:
derived_from: tosca.policies.Placement
description: The AffinityRule describes the affinity rules applicable for the defined targets
properties:
scope:
type: string
description: scope of the rule is an NFVI_node, an NFVI_PoP, etc.
required: true
constraints:
- valid_values: [ nfvi_node, zone, zone_group, nfvi_pop, network_link_and_node ]
nfvi_maintenance_group_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the impact tolerance and rules to be observed when a group of instances based on the same Vdu.Compute node is impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
targets: [ tosca.nodes.nfv.Vdu.Compute, tosca.nodes.nfv.VnfVirtualLink, tosca.groups.nfv.PlacementGroup ]
tosca.policies.nfv.AntiAffinityRule:
derived_from: tosca.policies.Placement
description: The AntiAffinityRule describes the anti-affinity rules applicable for the defined targets
properties:
scope:
type: string
description: scope of the rule is an NFVI_node, an NFVI_PoP, etc.
required: true
constraints:
- valid_values: [ nfvi_node, zone, zone_group, nfvi_pop, network_link_and_node ]
nfvi_maintenance_group_info:
type: tosca.datatypes.nfv.NfviMaintenanceInfo
description: Provides information on the impact tolerance and rules to be observed when a group of instances based on the same Vdu.Compute node is impacted during NFVI operation and maintenance (e.g. NFVI resource upgrades).
required: false
targets: [ tosca.nodes.nfv.Vdu.Compute, tosca.nodes.nfv.VnfVirtualLink, tosca.groups.nfv.PlacementGroup ]
tosca.policies.nfv.SupportedVnfInterface:
derived_from: tosca.policies.Root
description: this policy type represents interfaces produced by a VNF, the details to access them and the applicable connection points to use to access these interfaces
properties:
interface_name:
type: string
description: Identifies an interface produced by the VNF.
required: true
constraints:
- valid_values: [ vnf_indicator, vnf_configuration, vnf_lcm_coordination ]
details:
type: tosca.datatypes.nfv.InterfaceDetails
description: Provide additional data to access the interface endpoint
required: false
targets: [ tosca.nodes.nfv.VnfExtCp, tosca.nodes.nfv.VduCp ]
tosca.policies.nfv.SecurityGroupRule:
derived_from: tosca.policies.nfv.Abstract.SecurityGroupRule
description: The SecurityGroupRule type is a policy type specified the matching criteria for the ingress and/or egress traffic to/from visited connection points as defined in ETSI GS NFV-IFA 011 [1].
targets: [ tosca.nodes.nfv.VduCp, tosca.nodes.nfv.VnfExtCp ]
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
tosca.policies.nfv.VnfIndicator:
derived_from: tosca.policies.Root
description: The VnfIndicator policy type is a base policy type for defining VNF indicator specific policies that define the conditions to assess and the action to perform when a VNF indicator changes value as defined in ETSI GS NFV-IFA 011 [1].
properties:
source:
type: string
description: Describe the source of the indicator.
required: true
constraints:
- valid_values: [ vnf, em, both_vnf_and_em ]
targets: [ tosca.nodes.nfv.VNF ]
tosca.policies.nfv.VnfPackageChange:
derived_from: tosca.policies.Root
description: policy type specifying the processes and rules to be used for performing the resource related tasks, to change VNF instance to a different VNF Package (destination package)
properties:
selector:
type: tosca.datatypes.nfv.VnfPackageChangeSelector
description: Information to identify the source and destination VNFD for the change, and the related deployment flavours.
required: true
modification_qualifier:
type: string
description: Specifies the type of modification resulting from transitioning from srcVnfdId to dstVnfdId. The possible values are UP indicating that the destination VNF version is newer than the source version, DOWN indicating that the destination VNF version is older than the source version.
constraints: [ valid_values: [ up, down ] ]
required: true
additional_modification_description:
type: string
description: Additional information to qualify further the change between the two versions.
required: false
component_mappings:
type: list
entry_schema:
type: tosca.datatypes.nfv.VnfPackageChangeComponentMapping
description: Mapping information related to identifiers of components in source VNFD and destination VNFD that concern to the change process.
required: false
destination_flavour_id:
type: string
description: Identifies the deployment flavour in the destination VNF package for which this change applies. The flavour ID is defined in the destination VNF package.
required: true
actions:
type: list
description: List of applicable supported LCM coordination action names (action_name) specified in this VNFD as a TOSCA policy of a type derived from tosca.policies.nfv.LcmCoordinationAction.
required: false
entry_schema:
type: string
referenced_coordination_actions:
type: list
description: List of names of coordination actions not specified within this VNFD as a TOSCA policy of a type derived from tosca.policies.nfv.LcmCoordinationAction.
required: false
entry_schema:
type: string
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
tosca.policies.nfv.LcmCoordinationAction:
derived_from: tosca.policies.Root
description: The LcmCoordinationAction type is a policy type representing the LCM coordination actions supported by a VNF and/or expected to be supported by its EM for a particular VNF LCM operation. This policy concerns the whole VNF (deployment flavour) represented by the topology_template and thus has no explicit target list.
properties:
action_name:
type: string
description: Coordination action name.
required: true
# action: #represents a place holder for specifying actions of a VNF-specific type derived from tosca.datatypes.nfv.VnfLcmOpCoord
# type: tosca.datatypes.nfv.VnfLcmOpCoord
# description: Describes a set of information needed for coordination action in the VNF LCM operation.
# required: true
tosca.policies.nfv.LcmCoordinationsForLcmOperation:
derived_from: tosca.policies.Root
description: The LcmCoordinationsForLcmOperation type is a policy type representing supported LCM coordination actions associated to a VNF LCM operation. This policy concerns the whole VNF (deployment flavour) represented by the topology_template and thus has no explicit target list.
properties:
vnf_lcm_operation:
type: string
description: The VNF LCM operation the LCM coordination actions are associated with.
required: true
constraints:
- valid_values: [instantiate, scale, scale_to_level, change_flavour, terminate, heal, operate, change_ext_conn, modify_info, create_snapshot, revert_to_snapshot ]
actions:
type: list
description: List of applicable supported LCM coordination action names (action_name) specified in this VNFD as a TOSCA policy of a type derived from tosca.policies.nfv.LcmCoordinationAction.
required: false
entry_schema:
type: string
referenced_coordination_actions:
type: list
description: List of names of coordination actions not specified within this VNFD as a TOSCA policy of a type derived from tosca.policies.nfv.LcmCoordinationAction.
required: false
entry_schema:
type: string