Commit 93e61acb authored by Michele Carignani's avatar Michele Carignani
Browse files

YAML files updated to SOL001 v2.6.1.

parent 6bbac9e1

etsi_nfv_sol001_common_types.yaml

0 → 100644
+198 −0
Original line number Diff line number Diff line 
tosca_definitions_version: tosca_simple_yaml_1_2

description: ETSI NFV SOL 001 common types definitions version 2.6.1



data_types:

  tosca.datatypes.nfv.L2AddressData:

    derived_from: tosca.datatypes.Root

    description: Describes the information on the MAC addresses to be assigned to a connection point. 

    properties:

      mac_address_assignment:

        type: boolean

        description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility

        required: true 

  

  tosca.datatypes.nfv.L3AddressData:

    derived_from: tosca.datatypes.Root

    description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP 

    properties:

      ip_address_assignment:

        type: boolean

        description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility

        required: true

      floating_ip_activated:

        type: boolean

        description: Specifies if the floating IP scheme is activated on the Connection Point or not 

        required: true

      ip_address_type:

        type: string

        description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp

        required: false

        constraints:

          - valid_values: [ ipv4, ipv6 ]

      number_of_ip_address:

        type: integer

        description: Minimum number of IP addresses to be assigned 

        required: false

        constraints:

          - greater_than: 0



  tosca.datatypes.nfv.AddressData:

    derived_from: tosca.datatypes.Root

    description: Describes information about the addressing scheme and parameters applicable to a CP 

    properties:

      address_type:

        type: string

        description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point

        required: true

        constraints:

          - valid_values: [ mac_address, ip_address ]

      l2_address_data:

        type: tosca.datatypes.nfv.L2AddressData

        description: Provides the information on the MAC addresses to be assigned to a connection point.

        required: false

      l3_address_data:

        type: tosca.datatypes.nfv.L3AddressData

        description: Provides the information on the IP addresses to be assigned to a connection point 

        required: false



  tosca.datatypes.nfv.ConnectivityType:

    derived_from: tosca.datatypes.Root

    description: describes additional connectivity information of a virtualLink 

    properties:

      layer_protocols:

        type: list

        description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.

        required: true

        entry_schema:

          type: string

          constraints:

            - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]

      flow_pattern:

        type: string

        description: Identifies the flow pattern of the connectivity

        required: false

        constraints:

          - valid_values: [ line, tree, mesh ]



  tosca.datatypes.nfv.LinkBitrateRequirements:

    derived_from: tosca.datatypes.Root

    description: describes the requirements in terms of bitrate for a virtual link 

    properties:

      root:

        type: integer # in bits per second

        description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).

        required: true

        constraints:

          - greater_or_equal: 0

      leaf:

        type: integer # in bits per second

        description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches).

        required: false

        constraints:

          - greater_or_equal: 0



  tosca.datatypes.nfv.CpProtocolData:

    derived_from: tosca.datatypes.Root

    description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information

    properties:

      associated_layer_protocol:

        type: string

        required: true

        description: One of the values of the property layer_protocols of the CP 

        constraints:

          - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]

      address_data:

        type: list

        description: Provides information on the addresses to be assigned to the CP

        entry_schema: 

          type: tosca.datatypes.nfv.AddressData

        required: false



  tosca.datatypes.nfv.VnfProfile:

    derived_from: tosca.datatypes.Root

    description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF.

    properties:

      instantiation_level:

        type: string

        description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used.

        required: false

      min_number_of_instances:

        type: integer

        description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.

        required: true

        constraints:

          - greater_or_equal: 0

      max_number_of_instances:

        type: integer

        description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.

        required: true

        constraints:

          - greater_or_equal: 0



  tosca.datatypes.nfv.Qos:

    derived_from: tosca.datatypes.Root

    description: describes QoS data for a given VL used in a VNF deployment flavour 

    properties:

      latency:

        type: scalar-unit.time #Number

        description: Specifies the maximum latency 

        required: true

        constraints: 

          - greater_than: 0 s

      packet_delay_variation:

        type: scalar-unit.time #Number

        description: Specifies the maximum jitter  

        required: true

        constraints: 

          - greater_or_equal: 0 s

      packet_loss_ratio:

        type: float

        description: Specifies the maximum packet loss ratio 

        required: false

        constraints:

           - in_range: [ 0.0, 1.0 ]



capability_types:

  tosca.capabilities.nfv.VirtualLinkable:

    derived_from: tosca.capabilities.Node

    description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type

 

relationship_types:

  tosca.relationships.nfv.VirtualLinksTo:

    derived_from: tosca.relationships.DependsOn

    description: Represents an association relationship between the VduCp and VnfVirtualLink node types 

    valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ]

    

node_types:

  tosca.nodes.nfv.Cp:

    derived_from: tosca.nodes.Root

    description:  Provides information regarding the purpose of the connection point 

    properties:

      layer_protocols:

        type: list

        description: Identifies which protocol the connection point uses for connectivity purposes 

        required: true

        entry_schema:

          type: string

          constraints:

            - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]

      role: #Name in ETSI NFV IFA011 v0.7.3: cpRole

        type: string

        description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS 

        required: false

        constraints:

          - valid_values: [ root, leaf ]

      description:

        type: string

        description: Provides human-readable information on the purpose of the connection point 

        required: false

      protocol:

        type: list

        description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor 

        required: false

        entry_schema:

          type: tosca.datatypes.nfv.CpProtocolData

      trunk_mode:

        type: boolean

        description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other), When operating in "trunk mode", the Cp is capable of carrying traffic for several VLANs. Absence of this property implies that trunkMode is not configured for the Cp i.e. It is equivalent to boolean value "false".

        required: false

etsi_nfv_sol001_nsd_types.yaml

+27 −282

File changed.

Preview size limit exceeded, changes collapsed.

etsi_nfv_sol001_pnfd_types.yaml

+3 −116
Original line number Diff line number Diff line 
tosca_definitions_version: tosca_simple_yaml_1_2

description: ETSI NFV SOL 001 pnfd types definitions version 2.5.1

description: ETSI NFV SOL 001 pnfd types definitions version 2.6.1



imports:

  - etsi_nfv_sol001_vnfd_types.yaml

  - etsi_nfv_sol001_common_types.yaml



data_types:     

  tosca.datatypes.nfv.L2AddressData:

    derived_from: tosca.datatypes.Root

    description: Describes the information on the MAC addresses to be assigned to a connection point. 

    properties:

      mac_address_assignment:

        type: boolean

        description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility

        required: true 

  

  tosca.datatypes.nfv.L3AddressData:

    derived_from: tosca.datatypes.Root

    description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP 

    properties:

      ip_address_assignment:

        type: boolean

        description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility

        required: true

      floating_ip_activated:

        type: boolean

        description: Specifies if the floating IP scheme is activated on the Connection Point or not 

        required: true

      ip_address_type:

        type: string

        description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp

        required: false

        constraints:

          - valid_values: [ ipv4, ipv6 ]

      number_of_ip_address:

        type: integer

        description: Minimum number of IP addresses to be assigned 

        required: false

        constraints:

          - greater_than: 0



  tosca.datatypes.nfv.AddressData:

    derived_from: tosca.datatypes.Root

    description: Describes information about the addressing scheme and parameters applicable to a CP 

    properties:

      address_type:

        type: string

        description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point

        required: true

        constraints:

          - valid_values: [ mac_address, ip_address ]

      l2_address_data:

        type: tosca.datatypes.nfv.L2AddressData

        description: Provides the information on the MAC addresses to be assigned to a connection point.

        required: false

      l3_address_data:

        type: tosca.datatypes.nfv.L3AddressData

        description: Provides the information on the IP addresses to be assigned to a connection point 

        required: false

 

  tosca.datatypes.nfv.CpProtocolData:

    derived_from: tosca.datatypes.Root

    description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information

    properties:

      associated_layer_protocol:

        type: string

        required: true

        description: One of the values of the property layer_protocols of the CP 

        constraints:

          - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]

      address_data:

        type: list

        description: Provides information on the addresses to be assigned to the CP

        entry_schema: 

          type: tosca.datatypes.nfv.AddressData

  

  tosca.datatypes.nfv.LocationInfo:

    derived_from: tosca.datatypes.Root

    description:  Represents geographical information on the location where a PNF is deployed.
@@ -102,51 +33,7 @@ data_types: 
        description: caValue as per RFC4776.

        required: true

  

capability_types:

  tosca.capabilities.nfv.VirtualLinkable:

    derived_from: tosca.capabilities.Node

    description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type

  

relationship_types:

  tosca.relationships.nfv.VirtualLinksTo:

    derived_from: tosca.relationships.DependsOn

    description: Represents an association relationship between the VNF or PNF or Sap of a Nested NS and NsVirtualLink node types 

    valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ]  

  

node_types:

  tosca.nodes.nfv.Cp:

    derived_from: tosca.nodes.Root

    description:  Provides information regarding the purpose of the connection point 

    properties:

      layer_protocols:

        type: list

        description: Identifies which protocol the connection point uses for connectivity purposes 

        required: true

        entry_schema:

          type: string

          constraints:

            - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]

      role: #Name in ETSI NFV IFA011 v0.7.3: cpRole

        type: string

        description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS 

        required: false

        constraints:

          - valid_values: [ root, leaf ]

      description:

        type: string

        description: Provides human-readable information on the purpose of the connection point 

        required: false

      protocol:

        type: list

        description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor 

        required: true

        entry_schema:

          type: tosca.datatypes.nfv.CpProtocolData

      trunk_mode:

        type: boolean

        description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other)

        required: true



  tosca.nodes.nfv.PNF:

    derived_from: tosca.nodes.Root

    properties:

etsi_nfv_sol001_vnfd_types.yaml

+45 −195

File changed.

Preview size limit exceeded, changes collapsed.