Newer
Older
/**
* @author TTF 010
* @version $Id: $
* @desc This module provides ATS specific test case definitions for IMS Emergency calls.
* @see ETSI TS 103 795-2
*/
module AtsImsIot_Emergency {
// LibCommon
// LibSip
// LibIms
import from LibIot_TestInterface all;
import from LibIot_TestConfiguration all;
import from LibIot_PIXITS all;
import from LibIot_VxLTE_PIXITS all;
import from LibIot_VxLTE_Functions all;
// LibImsIot
import from AtsImsIot_TestConfiguration all;
import from AtsImsIot_TestSystem all;
import from AtsImsIot_Functions all;
import from AtsImsIot_Templates all;
import from AtsImsIot_TP_behavior_GM all;
import from AtsImsIot_TP_behavior_MW_PS all;
import from AtsImsIot_TP_behavior_MW_SI all;
import from AtsImsIot_TP_behavior_MW_IS all;
Yann Garcia
committed
import from AtsImsIot_TP_behavior_MX all;
import from AtsImsIot_TP_behavior_MM all;
import from AtsImsIot_TP_behavior_ML all;
import from AtsImsIot_TP_behavior_IC all;
import from AtsImsIot_TP_behavior_CX all;
import from AtsImsIot_TP_behavior_GX all;
import from AtsImsIot_TP_behavior_ISC all;
import from AtsImsIot_TP_behavior_S6A all;
import from AtsImsIot_TP_behavior_S9 all;
import from AtsImsIot_TP_behavior_SH all;
import from AtsImsIot_TP_behavior_RX all;
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5 Test Descriptions (Interoperability at HPLMN)
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.1 Network Attachment
*/
group NetworkAttachment {
group UENetworkAttachmentWithUSIM {
Yann Garcia
committed
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
/**
* @desc Emergency Network Attachment and Establishment of the Emergency Bearer with USIM.
* On successful emergency attachment, the UE/IVS should discover the P-CSCF IP address.
* The EPC will create the Emergency Bearers which will allow communication only between the UE and the P-CSCF
* and allowed forwarding towards E-CSCF
* @see TS 124 229 [2], clause 9.2.1 and L.2.2.6; TS 129 212 [7], clauses 4.5.15 and 4a.5.12;
* TS 129 272 [8], clause 5.2.1.1 (MME shall proceed even if Update Location fails)
*
*/
testcase TC_VoLTE_ECO_INT_ATT_01 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME,PX_DIAMETER_S6A_INTERFACENAME})){
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_S6A_MME_ULR_01 ( vc_vxlte_monitor_components.s6a, true ); // Check (ULR – Event 2)
f_mtc_check_TP_S6A_HSS_ECO_ULA_01 ( vc_vxlte_monitor_components.s6a); // Check (ULA – Event 3)
f_mtc_check_TP_GX_PCRF_ECO_CCA_01 ( vc_vxlte_monitor_components.gx); // Check (CCR, CCA – Events 4, 5)
// postamble
f_mtc_userRadioEnabled ( v_ueA, false, true );
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of TC TC_VoLTE_ECO_INT_ATT_01
} // End of group UENetworkAttachmentWithUSIM
group UENetworkAttachmentWithoutUSIM {
Yann Garcia
committed
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
/**
* @desc Emergency Network Attachment and Establishment of the Emergency Bearer without USIM.
* On successful emergency attachment, the UE/IVS should discover the P-CSCF IP address.
* The EPC will create the Emergency Bearers which will allow communication only between the UE and the P-CSCF
* and allowed forwarding towards E-CSCF
* @see TS 124 229 [2], clause 9.2.1 and L.2.2.6; TS 129 212 [7], clauses 4.5.15 and 4a.5.12;
* TS 129 272 [8], clause 5.2.1.1 (MME shall proceed even if Update Location fails)
*
*/
testcase TC_VoLTE_EMC_INT_ATT_02 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME,PX_DIAMETER_S6A_INTERFACENAME})){
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_S6A_MME_ULR_01 ( vc_vxlte_monitor_components.s6a, true ); // Check (ULR – Event 2)
f_mtc_check_TP_S6A_HSS_ECO_ULA_01 ( vc_vxlte_monitor_components.s6a); // Check (ULA – Event 3)
f_mtc_check_TP_GX_PCRF_EMC_CCA_01 ( vc_vxlte_monitor_components.gx); // Check (CCR, CCA – Events 4, 5)
// postamble
f_mtc_userRadioEnabled ( v_ueA, false, true );
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of TC TC_VoLTE_ECO_INT_ATT_02
} // End of group UENetworkAttachmentWithoutUSIM
} // End of group NetworkAttachment
/**
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.2 IMS Emergency Registration
*/
group EmergencyRegistration {
/**
* @desc To perform emergency registration via the established emergency bearer. Note that some UEs perform emergency registration automatically on attachment - in which case this test becomes merged with the previous ones.
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.2.1 IMS Emergency Registration - Successful
*/
testcase TD_VoLTE_ECO_INT_REG_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var ImsUserInfo v_userInfoA := f_getSipUserId ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PI_INTERFACENAME,
PX_SIP_MW_IS_INTERFACENAME,
PX_DIAMETER_CX_SH_INTERFACENAME,
PX_DIAMETER_CX_IH_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME}))
{
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_check_TP_GM_PCSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.gmA); // Events 1, 12
f_mtc_check_TP_MW_PCSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.mwPI); // Event 4, 11
f_mtc_check_TP_MW_ICSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.mwIS, true); // Event 7, 10
f_mtc_check_TP_CX_HSS_ECO_UAA_01(f_getCxInterface(PX_DIAMETER_CX_SINGLE_INTERFACE));// Event 5, 6
f_mtc_check_TP_CX_HSS_MAA_01(vc_vxlte_monitor_components.cxSH);// Event 8, 9
f_mtc_check_TP_GM_PCSCF_ECO_REGISTER_02(vc_vxlte_monitor_components.gmA); // Events 13, 22
f_mtc_check_TP_MW_PCSCF_ECO_REGISTER_02(vc_vxlte_monitor_components.mwPI); // Events 14, 21
f_mtc_check_TP_MW_ICSCF_ECO_REGISTER_02(vc_vxlte_monitor_components.mwIS, true); // Event 17, 20
f_mtc_check_TP_CX_HSS_ECO_UAA_02(f_getCxInterface(PX_DIAMETER_CX_SINGLE_INTERFACE));// Event 15, 16
f_mtc_check_TP_CX_HSS_SAA_01(vc_vxlte_monitor_components.cxSH);// Event 18, 19
Loading full blame...