Newer
Older
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_mME_CMP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_CMP_02
} // End of group Context_Management_group
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
* @desc Paging group
* @see ETSI TS 103 497-2 Clause 5.2.2.2.5 Paging group
*/
group Pagin_group {
/**
* @desc Verify that the IUT can send a PAGING to indicate a Paging procedure.
* <pre>
* Pics Selection: A.4/4.4
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a Paging procedure
* sends a PAGING
* containing a UE_Identity_Index_value
* containing a UE_Paging_Identity
* containing a S-TMSI
* containing an IMSI
* containing a CN_Domain.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_PAG_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.5.2¶1 and 9.1.6
*/
testcase TC_S1AP_MME_PAG_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_PAG_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_PAG_01
} // End of group Paging group
/**
* @desc Management group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.6 NAS transport group
*/
group NAS_transport_group {
/**
* @desc Verify that the IUT can send a DOWNLINK_NAS_TRANSPORT to indicate an ongoing NAS Transport procedure.
* <pre>
* Pics Selection: A.4/5.2
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an ongoing NAS Transport procedure
* sends a DOWNLINK_NAS_TRANSPORT
* containing an MME UE S1AP ID
* containing an eNB_UE_S1AP_ID
* containing a NAS-PDU.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_NAS_01
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
* @reference ETSI TS 136 413 V13.4.0 Clause 8.6.2.2¶1 and 9.1.7.2
*/
testcase TC_S1AP_MME_NAS_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_NAS_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_NAS_01
/**
* @desc Verify that the IUT can send a REROUTE_NAS_REQUEST to indicate a Reroute NAS Request procedure.
* <pre>
* Pics Selection: A.4/5.5
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a Reroute NAS Request procedure
* sends a REROUTE_NAS_REQUEST
* containing an MME UE S1AP ID
* containing a S1_Message
* containing an MME_Group_ID.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_NAS_02
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
* @reference ETSI TS 136 413 V13.4.0 Clause 8.6.2.2¶1 and 9.1.7.2
*/
testcase TC_S1AP_MME_NAS_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_NAS_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_NAS_02
} // End of group NAS_transport_group
/**
* @desc Management group
* @see ETSI TS 103 497-2 Clause 5.2.2.2.7 Management group
*/
group Management_group {
/**
* @desc Verify that the IUT can send a RESET to indicate a Reset procedure initiated from the MME.
* <pre>
* Pics Selection: A.4/6.1.2
* Ensure that the IUT
* to indicate a Reset procedure initiated from the MME
* sends a RESET
* containing a Cause
* indicating an appropriate cause value
* containing a Reset_Type
* containing a S1_Interface
* indicating a value ‘Reset_all’.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_01
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.2.1¶2 and 9.1.8.1 and 9.1.8.2
*/
testcase TC_S1AP_MME_MNP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_01
/**
* @desc Verify that the IUT can send process successfully all mandatory IEs in a RESET and sends a RESET_ACKNOWLEDGE
* <pre>
* Pics Selection: A.4/6.1.1
* Ensure that the IUT
* on receipt of a RESET
* containing a Cause
* indicating an appropriate cause value
* containing a Reset_Type
* containing an S1_Interface
* indicating value ‘Reset_all’
* sends a RESET_ACKNOWLEDGE
* containing a UE-associated_logical_S1-connection_list.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.2.1¶2 and 9.1.8.1 and 9.1.8.2
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
*/
testcase TC_S1AP_MME_MNP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_02
* @desc Verify that the IUT can successfully all mandatory IEs in a RESET and sends a RESET_ACKNOWLEDGE
* due to a Reset procedure in case of Abnormal Condition at the EPC.
* <pre>
* Pics Selection: A.4/6.1.1
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of a RESET
* containing a Cause
* indicating an appropriate cause value
* containing a Reset_Type
* containing a Part_of_S1_interface
* indicating an empty ‘UE-associated_logical_S1-connection’
* sends a RESET_ACKNOWLEDGE
* containing a UE-associated_logical_S1-connection_list
* indicating an empty ‘UE-associated_logical_S1-connection’.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_03
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.3.2¶1 and 9.1.8.1 and 9.1.8.2
*/
testcase TC_S1AP_MME_MNP_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_03());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_03
/**
* @desc Verify that the IUT can send a RESET to indicate a Reset procedure initiated from the eNB.
* <pre>
* Pics Selection: A.4/6.2.2
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an Error Indication procedure
* sends an ERROR_INDICATION
* (containing a Cause
* or containing a Criticality_Diagnostics).
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_04
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.2.1¶2 and 9.1.8.1 and 9.1.8.2
*/
testcase TC_S1AP_MME_MNP_04() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_04());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_04
/**
* @desc Verify that the IUT can process all mandatory IEs in a S1_SETUP_REQUEST and
* sends a S1_SETUP_RESPONSE to indicate a S1 Setup procedure.
* <pre>
* Pics Selection: A.4/6.3
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of a S1_SETUP_REQUEST
* containing a Global_eNB_ID
* containing a Supported_TAs
* containing a TAC
* containing a Default_Paging_DRX
* sends a S1_SETUP_RESPONSE.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_05
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.3.2¶1 and 9.1.8.4 and 9.1.8.5
*/
testcase TC_S1AP_MME_MNP_05() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_05());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_05
/**
* @desc Verify that the IUT can process all mandatory IEs in a S1_SETUP_REQUEST and
* sends a S1_SETUP_FAILURE to indicate an invalid S1 Setup procedure due to an unknown PLMN identities.
* <pre>
* Pics Selection: A.4/6.3
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of a S1_SETUP_REQUEST
* containing a Global_eNB_ID
* containing a Supported_TAs
* containing a TAC
* containing a Broadcast_PLMNs
* indicating at least one unknown PLMN identity
* sends a S1_SETUP_FAILURE
* containing a Cause
* indicating the cause value 'Unknown PLMN'.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_06
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.3.2¶1 and 9.1.8.4 and 9.1.8.6
*/
testcase TC_S1AP_MME_MNP_06() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_06());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_06
/**
* @desc Verify that the IUT can process all mandatory IEs in an ENB_CONFIGURATION_UPDATE and
* sends an ENB_CONFIGURATION_UPDATE_ACKNOWLEDGE to indicate an eNB Configuration Update procedure.
* <pre>
* Pics Selection: A.4/6.4
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an ENB_CONFIGURATION_UPDATE
* containing a Global_eNB_ID
* containing a Supported_TAs
* containing a TAC
* sends an MME_CONFIGURATION_UPDATE_ACKNOWLEDGE.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_07
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.4.2¶1 and 9.1.8.7 and 9.1.8.8
*/
testcase TC_S1AP_MME_MNP_07() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_07());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_07
/**
* @desc Verify that the IUT can process all mandatory IEs in an ENB_CONFIGURATION_UPDATE and
* sends an ENB_CONFIGURATION_UPDATE_FAILURE to indicate an invalid eNB Configuration Update procedure due to an invalid Global eNB identifier.
* <pre>
* Pics Selection: A.4/6.4
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an ENB_CONFIGURATION_UPDATE
* containing a Global_eNB_ID
* indicating invalid value
* sends an ENB_CONFIGURATION_UPDATE_FAILURE
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_08
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.3.2¶1 and 9.1.8.7 and 9.1.8.9
*/
testcase TC_S1AP_MME_MNP_08() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_08());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_08
/**
* @desc Verify that the IUT can send an ENB_CONFIGURATION_UPDATE to indicate an eNB Configuration Update procedure.
* <pre>
* Pics Selection: A.4/6.5
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an eNB Configuration Update procedure
* sends an ENB_CONFIGURATION_UPDATE
* containing a Global_eNB_ID
* containing a Supported_TAs
* containing a TAC.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_09
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.4.2¶1 and 9.1.8.10
*/
testcase TC_S1AP_MME_MNP_09() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_09());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_09
/**
* @desc Verify that the IUT can send an OVERLOAD_START to indicate an Overload Start procedure.
* <pre>
* Pics Selection: A.4/6.6
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an Overload Start procedure
* sends an OVERLOAD_START
* containing an Overload_Response.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_10
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.6.2¶1 and 9.1.8.13
*/
testcase TC_S1AP_MME_MNP_10() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_10());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_10
/**
* @desc Verify that the IUT can send an OVERLOAD_STOP to indicate an Overload Stop procedure.
* <pre>
* Pics Selection: A.4/6.7
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an Overload Stop procedure
* sends an OVERLOAD_STOP
* containing an Overload_Response.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MNP_11
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.7.2¶1 and 9.1.8.14
*/
testcase TC_S1AP_MME_MNP_11() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MNP_11());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MNP_11
} // End of group Management_group
/**
* @desc S1 CDMA 2000 tunnelling group group
* @see ETSI TS 103 497-2 Clause 5.2.2.2.8 S1 CDMA 2000 tunnelling group group
*/
group S1_CDMA_2000_tunelling_group {
/**
* @desc Verify that the IUT can send a DOWNLINK_S1_CDMA2000_TUNNELLING.
* <pre>
* Pics Selection: PICS A.3/7.1
* Ensure that the IUT
* to indicate a CDMA2000 signalling event
* sends a DOWNLINK_S1_CDMA2000_TUNNELLING
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* not containing an E-RABs_Subject_to_Forwarding_Lis
* containing a CDMA2000_HO_type
* containing a CDMA2000_PDU.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_STP_01
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
* @reference ETSI TS 136 413 V13.4.0 Clause 8.8.2.1¶1 and 9.1.9.1
*/
testcase TC_S1AP_MME_STP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_STP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_STP_01
} // End of group S1_CDMA_2000_tunelling_group
* @see ETSI TS 103 497-2 Clause 5.2.2.2.10 Trace group
*/
group Trace_group {
/**
* @desc Verify that the IUT can send a TRACE_START message to indicate Trace Start procedure.
* <pre>
* Pics Selection: A.4/9.1
* Ensure that the IUT
* to indicate a Trace Start procedure
* sends a TRACE_START
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Trace_Activation
* containing an E-UTRAN_Trace_ID
* containing a Interfaces_To_Trace
* indicating value ‘S1-MME’
* containing a Trace_depth
* indicating value ‘maximum’
* containing a Trace_Collection_Entity_IP_Address.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_TRP_01
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
* @reference ETSI TS 136 413 V13.4.0 Clause 8.10.1.2¶1 and 9.1.11.1 and 9.2.1.4
*/
testcase TC_S1AP_MME_TRP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_TRP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_TRP_01
/**
* @desc Verify that the IUT can successfully process all mandatory IEs in a DEACTIVATE_TRACE.
* <pre>
* Pics Selection: A.4/9.3
* Ensure that the IUT
* to indicate a Deactivate Trace procedure
* sends a DEACTIVATE_TRACE
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_Trace_ID.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_TRP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.10.1.211 and 9.1.11.2
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
*/
testcase TC_S1AP_MME_TRP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_TRP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_TRP_02
} // End of goup Trace_group
/**
* @see ETSI TS 103 497-2 Clause 5.2.2.2.11 Location reporting group
*/
group Location_reporting_group {
/**
* @desc Verify that the IUT can send a LOCATION_REPORTING_CONTROL.
* <pre>
* Pics Selection: A.4/10.1 and A.4/10.3
* Ensure that the IUT
* to indicate a Location Reporting Control procedure
* sends a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing a Event_Type
* containing a Report_Area
* indicating ECGI.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_LRP_01
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.1.2-1 and 9.1.12.1 and 9.1.12.3 and 9.2.1.16,34,38
*/
testcase TC_S1AP_MME_LRP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_LRP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_LRP_01
/**
* @desc Verify that the IUT can send a LOCATION_REPORTING_CONTROL and process all mandatory IEs in a LOCATION REPORT_FAILURE_INDICATION.
* <pre>
* Pics Selection: A.4/10.1 and A.4/10.3
* Ensure that the IUT
* to indicate a Location Reporting Control procedure
* sends a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing a Event_Type
* containing a Report_Area
* indicating ECGI
* receives a LOCATION_REPORT_FAILURE_INDICATION
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_LRP_02
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.1.2-1 and 9.1.12.1 and 9.1.12.3 and 9.2.1.16,34,38
*/
testcase TC_S1AP_MME_LRP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_LRP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_LRP_02
} // End of group Location_reporting_group
/**
* @desc Warning message transmission group
* @see ETSI TS 103 497-2 Clause 5.2.2.2.12 Warning message transmission group
*/
group Warning_message_transmission_group {
/**
* @desc Verify that the IUT can send a WRITE-REPLACE_WARNING_REQUEST to indicate a Warning Message Transmission procedure.
* <pre>
* Pics Selection: PICS A.4/11.1
* Ensure that the IUT
* to indicate a Warning Message Transmission procedure
* sends a WRITE-REPLACE_WARNING_REQUEST
* containing a Message_Identifier
* containing a Serial_Number
* containing a Repetition Period
* containing an Number_of_Broadcasts_Requested
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_WTP_01
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.1.2-1 and 9.1.13.1 and 9.1.13.2
*/
testcase TC_S1AP_MME_WTP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_WTP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_WTP_01
/**
* @desc Verify that the IUT can send a KILL_REQUEST to cancel an already ongoing broadcast of a Warning Message Transmission procedure.
* <pre>
* Pics Selection: PICS A.4/11.2
* Ensure that the IUT
* to indicate a cancellation of an ongoing Warning Message Transmission procedure
* sends a KILL_REQUEST
* containing a Message_Identifier
* containing a Serial_Number
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_WTP_02
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.2.2-1 and 9.1.13.3 and 9.1.13.4
*/
testcase TC_S1AP_MME_WTP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_WTP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_WTP_02
} // End of group Warning_message_transmission_group
/**
* @desc MME direct information transfer group
* @see ETSI TS 103 497-2 Clause 5.2.2.2.14 MME direct information transfer group
*/
group MME_direct_information_transfer_group {
/**
* @desc Verify that the IUT can send an MME_DIRECT_INFORMATION_TRANSFER to indicate an MME Configuration Transfer procedure.
* <pre>
* Pics Selection: PICS A.4/13
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an MME Direct Information Transfer procedure,
* sends an MME_DIRECT_INFORMATION_TRANSFER
* containing a RIM
* containing a RIM_Transfer
* containing a RIM_Information.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_MME_MIT_01
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
* @reference ETSI TS 136 413 V13.4.0 Clause 8.14.2.1 and 9.2.3.23
*/
testcase TC_S1AP_MME_MIT_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MIT_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MIT_01
} // End of group MME_direct_information_transfer_group
/**
* @desc MME configuration transfer
* @see ETSI TS 103 497-2 Clause 5.2.2.2.16 MME configuration transfer group
*/
group MME_configuration_transfer_group {
/**
* @desc Verify that the IUT can send an MME_CONFIGURATION_TRANSFER to indicate an MME Configuration Transfer procedure.
* <pre>
* Pics Selection: PICS A.4/15
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an MME Configuration Transfer procedure,
* sends an MME_CONFIGURATION_TRANSFER
* containing a SON_Configuration_Transfer
* containing a Target_eNB-ID
* containing a Source_eNB-ID