Newer
Older
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_LRP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_LRP_01
/**
* @desc Verify that the IUT can send a LOCATION_REPORTING_CONTROL and process all mandatory IEs in a LOCATION REPORT_FAILURE_INDICATION.
* <pre>
* Pics Selection: A.4/10.1 and A.4/10.3
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
* Ensure that the IUT
* to indicate a Location Reporting Control procedure
* sends a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing a Event_Type
* containing a Report_Area
* indicating ECGI
* receives a LOCATION_REPORT_FAILURE_INDICATION
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_LRP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.1.2-1 and 9.1.12.1 and 9.1.12.3 and 9.2.1.16,34,38
*/
testcase TC_S1AP_MME_LRP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_LRP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_LRP_02
} // End of group Location_reporting_group
/**
* @desc Warning message transmission group
* @see ETSI DTS/INT-00135-2 Clause 5.2.2.2.12 Warning message transmission group
*/
group Warning_message_transmission_group {
/**
* @desc Verify that the IUT can send a WRITE-REPLACE_WARNING_REQUEST to indicate a Warning Message Transmission procedure.
* <pre>
* Pics Selection: PICS A.4/11.1
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
* Ensure that the IUT
* to indicate a Warning Message Transmission procedure
* sends a WRITE-REPLACE_WARNING_REQUEST
* containing a Message_Identifier
* containing a Serial_Number
* containing a Repetition Period
* containing an Number_of_Broadcasts_Requested
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_WTP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.1.2-1 and 9.1.13.1 and 9.1.13.2
*/
testcase TC_S1AP_MME_WTP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_WTP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_WTP_01
/**
* @desc Verify that the IUT can send a KILL_REQUEST to cancel an already ongoing broadcast of a Warning Message Transmission procedure.
* <pre>
* Pics Selection: PICS A.4/11.2
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
* Ensure that the IUT
* to indicate a cancellation of an ongoing Warning Message Transmission procedure
* sends a KILL_REQUEST
* containing a Message_Identifier
* containing a Serial_Number
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_WTP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.2.2-1 and 9.1.13.3 and 9.1.13.4
*/
testcase TC_S1AP_MME_WTP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_WTP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_WTP_02
} // End of group Warning_message_transmission_group
/**
* @desc MME direct information transfer group
* @see ETSI DTS/INT-00135-2 Clause 5.2.2.2.14 MME direct information transfer group
*/
group MME_direct_information_transfer_group {
/**
* @desc Verify that the IUT can send an MME_DIRECT_INFORMATION_TRANSFER to indicate an MME Configuration Transfer procedure.
* <pre>
* Pics Selection: PICS A.4/13
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an MME Direct Information Transfer procedure,
* sends an MME_DIRECT_INFORMATION_TRANSFER
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
* containing a RIM
* containing a RIM_Transfer
* containing a RIM_Information.
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_MIT_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.14.2.1 and 9.2.3.23
*/
testcase TC_S1AP_MME_MIT_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MIT_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MIT_01
} // End of group MME_direct_information_transfer_group
/**
* @desc MME configuration transfer
* @see ETSI DTS/INT-00135-2 Clause 5.2.2.2.16 MME configuration transfer group
*/
group MME_configuration_transfer_group {
/**
* @desc Verify that the IUT can send an MME_CONFIGURATION_TRANSFER to indicate an MME Configuration Transfer procedure.
* <pre>
* Pics Selection: PICS A.4/15
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an MME Configuration Transfer procedure,
* sends an MME_CONFIGURATION_TRANSFER
* containing a SON_Configuration_Transfer
* containing a Target_eNB-ID
* containing a Source_eNB-ID
* containing a SON_Information.
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_MCT_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.16.2.1 and 9.1.17
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
*/
testcase TC_S1AP_MME_MCT_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_MCT_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_MCT_01
} // End of group MME_configuration_transfer_group
/**
* @desc LPPa transport group
* @see ETSI DTS/INT-00135-2 Clause 5.2.2.2.17 LPPa transport group
*/
group LPPa_transport_group {
/**
* @desc Verify that the IUT can send a DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT to indicate a LPPa Transport procedure
* using a UE associated signalling.
* <pre>
* Pics Selection: PICS A.4/16.1
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a LPPa Transport procedure using a UE associated signalling,
* sends a DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Routing_ID
* indicating a valid routing identifier value
* containing an LPPa-PDU.
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_LPP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.17.2.1 and 9.1.19.1
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
*/
testcase TC_S1AP_MME_LPP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_LPP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_LPP_01
/**
* @desc Verify that the IUT can send a DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT to indicate a LPPa Transport procedure
* using a non-UE associated signalling.
* <pre>
* Pics Selection: PICS A.3/16.3
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a LPPa Transport procedure using a UE associated signalling,
* sends a DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Routing_ID
* indicating a valid routing identifier value
* containing an LPPa-PDU.
* </pre>
*
* @see ETSI DTS/INT-00135-2 TP_S1AP_MME_LPP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.17.2.3 and 9.1.19.3
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
*/
testcase TC_S1AP_MME_LPP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_mme;
// Test control
if (not PICS_S1AP_MME_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_MME_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_MME_Up(v_s1ap_mme);
// Start
v_s1ap_mme.start(f_TC_S1AP_MME_LPP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_MME_LPP_02
} // End of group LPPa_transport_group