Newer
Older
* @version $URL$
* $Id$
* @desc This module provides functions used in S1AP.
* @copyright ETSI Copyright Notification
* No part may be reproduced except as authorized by written permission.
* The copyright and the foregoing restriction extend to reproduction in all media.
* All rights reserved.
* @see ETSI TS 136 413 / 3GPP TS 36.413 version 13.4.0 Release 13
import from LibCommon_VerdictControl all;
import from LibCommon_BasicTypesAndValues all;
import from S1AP_PDU_Descriptions language "ASN.1:1997" all;
import from LibS1AP_Interface all;
import from LibS1AP_Pixits all;
import from LibS1AP_Templates all;
/**
* @desc Common functions description
*/
group commonFunctions {
/**
* @desc Receive functions description
*/
group receivePDU {
*/
function f_S1APPDU_Get(
inout S1AP_PDU p_PDU
) runs on S1APComponent {
vc_recvS1AP_PDU := p_PDU;
if (ischosen(p_PDU.initiatingMessage)) {
* @param p_PDU template of the message to be received
*/
function f_recv_S1AP_PDU(
in template S1AP_PDU p_PDU
) runs on S1APComponent {
[] tc_wait.timeout {
setverdict(inconc,"*** " & __SCOPE__ & ": INCONC: Message was not received in due time. ***");
all timer.stop;
f_componentStop();
}
* @desc Receive S1AP PDU with InitiatingMessage payload from protocol port
* @param p_initiatingMessage Receive template for InitiatingMessage message
* @desc Receive S1AP PDU with SuccessfulOutcome payload from protocol port
* @param p_successfulOutcome Receive template for SuccessfulOutcome message
f_recv_S1AP_PDU( {successfulOutcome := p_successfulOutcome})
* @desc Receive S1AP PDU with UnsuccessfulOutcome payload from protocol port
* @param p_unsuccessfulOutcome Receive template for UnsuccessfulOutcome message
template (present) UnsuccessfulOutcome p_unsuccessfulOutcome := ?
f_recv_S1AP_PDU( {unsuccessfulOutcome := p_unsuccessfulOutcome})
} // End of function f_recv_S1AP_unsuccessfulOutcome
/**
* @desc Receive S1AP Message E-RAB_SetupRequest
* @param p_value Receive template for E-RAB_SetupRequest IEs
*/
function f_recv_E_RABSetupRequest(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_E_RABSetupRequest(p_value))
} // End of function f_recv_E_RABSetupRequest
/**
* @desc Receive S1AP Message E_RABSetupResponse
* @param p_value Receive template for E_RABSetupResponse IEs
*/
function f_recv_E_RABSetupResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABSetupResponse(p_value))
} // End of f_recv_E_RABSetupResponse
/**
* @desc Receive S1AP Message E_RABReleaseResponse
* @param p_value Receive template for E_RABReleaseResponse IEs
*/
function f_recv_E_RABReleaseResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABReleaseResponseIE(p_value))
} // End of f_recv_E_RABReleaseResponse
* @desc Receive S1AP Message E_RABModifiedResponse
* @param p_value Receive template for E_RABModifiedResponse IEs
*/
function f_recv_E_RABModifiedResponse(
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABModifiedResponse(p_value))
} // End of f_recv_E_RABModifiedResponse
function f_recv_E_RABReleaseIndication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABReleaseIndication(p_value))
}
function f_recv_E_RABModificationIndication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABModificationIndication(p_value))
/**
* @desc Receive S1AP Message E_RABModifiedRequest
* @param p_value Receive template for E_RABModifiedRequest IEs
*/
function f_recv_E_RABModifiedRequest(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABModifiedRequest(p_value))
} // End of f_recv_E_RABModifiedRequest
/**
* @desc Receive S1AP Message E_RABReleaseCommand
* @param p_value Receive template for E_RABReleaseCommand IEs
*/
function f_recv_E_RABReleaseCommand(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABReleaseCommand(p_value))
} // End of f_recv_E_RABReleaseCommand
/**
* @desc Receive S1AP Message E_RABModificationConfirm
* @param p_value Receive template for E_RABModificationConfirm IEs
*/
function f_recv_E_RABModificationConfirm(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABModificationConfirm(p_value))
} // End of f_recv_E_RABModificationConfirm
/**
* @desc Receive S1AP Message Handover Required
* @param p_value Receive template for Handover Required IEs
*/
function f_recv_HandoverRequired(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_HandoverRequired(p_value))
} // End of function f_recv_HandoverRequired
/**
* @desc Receive S1AP Message Handover Command
* @param p_value Receive template for Handover Command IEs
*/
function f_recv_HandoverCommand(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_HandoverCommand(p_value))
} // End of function f_recv_HandoverCommand
/**
* @desc Receive S1AP Message Handover Preparation Failure
* @param p_value Receive template for Handover Preparation Failure IEs
*/
function f_recv_HandoverPreparationFailure(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_unsuccessfulOutcome(mw_HandoverPreparationFailure(p_value))
} // End of function f_recv_HandoverRequired
/**
* @desc Receive S1AP Message Handover Request
* @param p_value Receive template for Handover Request IEs
*/
function f_recv_HandoverRequest(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_HandoverRequest(p_value))
} // End of function f_recv_HandoverRequest
pintar
committed
/**
* @desc Receive S1AP Message Handover Cancel
* @param p_value Receive template for Handover Cancel IEs
*/
function f_recv_HandoverCancel(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_HandoverCancel(p_value))
} // End of function f_recv_HandoverCancel
/**
* @desc Receive S1AP Message Handover CancelAcknowledge
* @param p_value Receive template for Handover Cancel Acknowledge IEs
*/
function f_recv_HandoverCancelAck(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_HandoverCancelAck(p_value))
} // End of function f_recv_HandoverCancelAck
/**
* @desc Receive S1AP Message MME STATUS TRANSFER
* @param p_value Receive template for MME_STATUS_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.5.14 MME STATUS TRANSFER
*/
function f_recv_Mme_Status_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_Mme_Status_Transfer(p_value))
} // End of f_recv_Mme_Status_Transfer
pintar
committed
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
/**
* @desc Receive S1AP Message Handover Notify
* @param p_value Receive template for Handover Notify IEs
*/
function f_recv_HandoverNotify(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_HandoverNotify(p_value))
} // End of function f_recv_HandoverNotify
/**
* @desc Receive S1AP Message Handover Failure
* @param p_value Receive template for Handover Failure IEs
*/
function f_recv_HandoverFailure(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_unsuccessfulOutcome(mw_HandoverFailure(p_value))
} // End of function f_recv_HandoverFailure
/**
* @desc Receive S1AP Message Handover Request Acknowlege
* @param p_value Receive template for Handover Request Acknowlege IEs
*/
function f_recv_HandoverRequestAck(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_HandoverRequestAck(p_value))
} // End of function f_recv_HandoverRequestAck
/**
* @desc Receive S1AP Message Path Switch Request
* @param p_value Receive template for Path Switch Request IEs
*/
function f_recv_PathSwitchRequest(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_PathSwitchRequest(p_value))
} // End of function f_recv_PathSwitchRequest
/**
* @desc Receive S1AP Message Path Switch Request Acknowledge
* @param p_value Receive template for Path Switch Request Acknowledge IEs
*/
function f_recv_PathSwitchRequestAck(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_PathSwitchRequestAck(p_value))
} // End of function f_recv_PathSwitchRequestAck
/**
* @desc Receive S1AP Message Path Switch Request Failure
* @param p_value Receive template for Path Switch Request Failure IEs
*/
function f_recv_PathSwitchRequestFailure(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_unsuccessfulOutcome(mw_PathSwitchRequestFailure(p_value))
}
/**
* @desc Receive S1AP Message eNB Status Transfer
* @param p_value Receive template for eNB Status Transfer IEs
*/
function f_recv_EnbStatusTransfer(in template (present) RecordOf_ProtocolIE p_value :=?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_EnbStatusTransfer(p_value))
} // End of function f_recv_EnbStatusTransfer
/**
* @desc Receive S1AP Message InitialContext_SetupResponse
* @param p_value Receive template for InitialContext_SetupResponse IEs
*/
function f_recv_InitialContext_SetupResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_InitialContextSetupResponse(p_value))
} // End of f_recv_InitialContext_SetupResponse
/**
* @desc Receive S1AP Message InitialContext_SetupRequest
* @param p_value Receive template for InitialContext_SetupRequest IEs
* @param p_criticality Expected criticality value. Default: reject
*/
function f_recv_InitialContext_SetupRequest(
template (present) RecordOf_ProtocolIE p_value := ?,
template (present) Criticality p_criticality := reject
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(
mw_InitialContextSetupRequest(
p_value,
p_criticality
))
} // End of f_recv_InitialContext_SetupRequest
/**
* @desc Receive S1AP Message INITIAL UE MESSAGE
* @param p_value Receive template for INITIAL UE MESSAGE IEs
*/
function f_recv_Initial_UE_Message(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_initial_uE_Message(p_value))
} // End of f_recv_Initial_UE_Message
* @desc Receive S1AP Message S1 SETUP REQUEST
* @param p_value Receive template for S1 SETUP REQUEST IEs
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_s1_Setup_Request(p_value))
} // End of f_recv_S1_Setup_Request
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
/**
* @desc Receive S1AP Message ENB CONFIGURATION UPDATE
* @param p_value Receive template for ENB CONFIGURATION UPDATE IEs
*/
function f_recv_eNB_Configuration_Update(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Configuration_Update(p_value))
} // End of f_recv_eNB_Configuration_Update
/**
* @desc Receive S1AP Message OVERLOAD START
* @param p_value Receive template for OVERLOAD START IEs
*/
function f_recv_eNB_Overload_Start(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Overload_Start(p_value))
} // End of f_recv_eNB_Overload_Start
/**
* @desc Receive S1AP Message OVERLOAD STOP
* @param p_value Receive template for OVERLOAD STOP IEs
*/
function f_recv_eNB_Overload_Stop(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Overload_Stop(p_value))
} // End of f_recv_eNB_Overload_Stop
/**
* @desc Receive S1AP Message ERROR_INDICATION
* @param p_value Receive template for ERROR_INDICATION IEs
*/
function f_recv_Error_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_error_Indication(p_value))
} // End of f_recv_Error_Indication
/**
* @desc Receive S1AP Message S1 SETUP RESPONSE
* @param p_value Receive template for S1 SETUP RESPONSE IEs
*/
function f_recv_S1_Setup_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_s1_Setup_Response(p_value))
} // End of f_recv_S1_Setup_Response
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
/**
* @desc Receive S1AP Message S1 SETUP FAILURE
* @param p_value Receive template for S1 SETUP FAILURE IEs
*/
function f_recv_S1_Setup_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_s1_Setup_Failure(p_value))
} // End of f_recv_S1_Setup_Failure
/**
* @desc Receive S1AP Message ENB CONFIGURATION UPDATE ACKNOWLEDGE
* @param p_value Receive template for ENB CONFIGURATION UPDATE ACKNOWLEDGE IEs
*/
function f_recv_eNB_Configuration_Update_Acknowledge(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_eNB_Configuration_Update_Acknowledge(p_value))
} // End of f_recv_eNB_Configuration_Update_Acknowledge
/**
* @desc Receive S1AP Message ENB CONFIGURATION UPDATE FAILURE
* @param p_value Receive template for ENB CONFIGURATION UPDATE FAILURE IEs
*/
function f_recv_eNB_Configuration_Update_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_eNB_Configuration_Update_Failure(p_value))
} // End of f_recv_eNB_Configuration_Update_Failure
/**
* @desc Receive S1AP Message MME CONFIGURATION UPDATE ACKNOWLEDGE
* @param p_value Receive template for MME CONFIGURATION UPDATE ACKNOWLEDGE IEs
*/
function f_recv_MME_Configuration_Update_Acknowledge(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_mME_Configuration_Update_Acknowledge(p_value))
} // End of f_recv_MME_Configuration_Update_Acknowledge
/**
* @desc Receive S1AP Message MME CONFIGURATION UPDATE FAILURE
* @param p_value Receive template for MME CONFIGURATION UPDATE FAILURE IEs
*/
function f_recv_MME_Configuration_Update_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_mME_Configuration_Update_Failure(p_value))
} // End of f_recv_MME_Configuration_Update_Failure
/**
* @desc Receive S1AP Message PAGING
* @param p value Receive template for PAGING IEs
*/
function f_recv_Paging(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_paging(p_value))
} // End of f_recv_Paging
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
/**
* @desc Receive S1AP Message DOWNLINK NAS TRANSPORT
* @param p value Receive template for DOWNLINK NAS TRANSPORT IEs
*/
function f_recv_Downlink_NAS_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_downlink_nAS_Transport(p_value))
} // End of f_recv_Downlink_NAS_Transport
/**
* @desc Receive S1AP Message UPLINK NAS TRANSPORT
* @param p value Receive template for UPLINK NAS TRANSPORT IEs
*/
function f_recv_Uplink_NAS_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_uplink_nAS_Transport(p_value))
} // End of f_recv_Uplink_NAS_Transport
/**
* @desc Receive S1AP Message sends a NAS NON DELIVERY INDICATION
* @param p value Receive template for NAS NON DELIVERY INDICATION IEs
*/
function f_recv_NAS_Non_Delivery_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_nAS_Non_Delivery_Indication(p_value))
} // End of f_recv_NAS_Non_Delivery_Indication
/**
* @desc Receive S1AP Message REROUTE NAS REQUEST
* @param p value Receive template for REROUTE NAS REQUEST IEs
*/
function f_recv_Reroute_NAS_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_reroute_nAS_Request(p_value))
} // End of f_recv_Reroute_NAS_Request
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
/**
* @desc Receive S1AP Message RESET
* @param p_value Receive template for RESET IEs
*/
function f_recv_Reset(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_reset(p_value))
} // End of f_recv_Reset
/**
* @desc Receive S1AP Message RESET ACKNOWLEDGE
* @param p_value Receive template for RESET ACKNOWLEDGE IEs
*/
function f_recv_Reset_Acknowledge(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_reset_Acknowledge(p_value))
} // End of f_recv_Reset_Acknowledge
/**
* @desc Receive S1AP Message an UPLINK S1 CDMA2000 TUNNELLING
* @param p_value Receive template for UPLINK S1 CDMA2000 TUNNELLING IEs
*/
function f_recv_Uplink_S1_CDMA2000_Tunnelling(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_uplink_S1_CDMA2000_Tunnelling(p_value))
} // End of f_recv_Uplink_S1_CDMA2000_Tunnelling
/**
* @desc Receive S1AP Message UE CAPABILITY INFO INDICATION
* @param p_value Receive template for UE CAPABILITY INFO INDICATION IEs
*/
function f_recv_eNB_UE_Capability_Info_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_uE_Capability_Info_Indication(p_value))
} // End of f_recv_eNB_UE_Capability_Info_Indication
/**
* @desc Receive S1AP Message TRACE FAILURE INDICATION
* @param p_value Receive template for TRACE FAILURE INDICATION IEs
*/
function f_recv_Trace_Failure_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_trace_Failure_Indication(p_value))
} // End of f_recv_Trace_Failure_Indication
/**
* @desc Receive S1AP Message CELL TRAFFIC TRACE
* @param p_value Receive template for CELL TRAFFIC TRACE IEs
*/
function f_recv_Cell_Traffic_Trace(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_cell_Traffic_Trace(p_value))
} // End of f_recv_Cell_Traffic_Trace
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
/**
* @desc Receive S1AP Message LOCATION REPORT
* @param p_value Receive template for LOCATION REPORT IEs
*/
function f_recv_Location_Report(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_location_Report(p_value))
} // End of f_recv_Location_Report
/**
* @desc Receive S1AP Message LOCATION REPORT FAILURE INDICATION
* @param p_value Receive template for LOCATION REPORT FAILURE INDICATION IEs
*/
function f_recv_Location_Report_Failure_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_location_Report_Failure_Indication(p_value))
} // End of f_recv_Location_Report_Failure_Indication
/**
* @desc Receive S1AP Message WRITE-REPLACE WARNING RESPONSE
* @param p_value Receive template for WRITE-REPLACE WARNING RESPONSE IEs
*/
function f_recv_Write_Replace_Warning_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_write_Replace_Warning_Response(p_value))
} // End of f_recv_Write_Replace_Warning_Response
/**
* @desc Receive S1AP Message WRITE-REPLACE WARNING RESPONSE
* @param p_value Receive template for WRITE-REPLACE WARNING RESPONSE IEs
*/
function f_recv_Kill_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_kill_Response(p_value))
} // End of f_recv_Kill_Response
/**
* @desc Receive S1AP Message PWS RESTART INDICATION
* @param p_value Receive template for PWS_RESTART_INDICATION IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.5 PWS RESTART INDICATION
*/
function f_recv_eNB_PWS_Restart_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_pWS_Restart_Indication(p_value))
} // End of f_recv_eNB_PWS_Restart_Indication
/**
* @desc Receive S1AP Message PWS FAILURE INDICATION
* @param p_value Receive template for PWS_FAILURE_INDICATION IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.6 PWS FAILURE INDICATION
*/
function f_recv_eNB_PWS_Failure_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_pWS_Failure_Indication(p_value))
} // End of f_recv_eNB_PWS_Failure_Indication
/**
* @desc Receive S1AP Message ENB DIRECT INFORMATION TRANSFER
* @param p_value Receive template for ENB_DIRECT_INFORMATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.14 eNB DIRECT INFORMATION TRANSFER
*/
function f_recv_eNB_Direct_Information_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Direct_Information_Transfer(p_value))
} // End of f_recv_eNB_Configuration_Transfer
/**
* @desc Receive S1AP Message DOWNLINK S1 CDMA2000 TUNNELLING
* @param p_value Receive template for DOWNLINK S1 CDMA2000 TUNNELLING IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.9.1 DOWNLINK S1 CDMA2000 TUNNELLING
*/
function f_recv_Downlink_S1_CDMA2000_Tunnelling(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_downlink_S1_CDMA2000_Tunnelling(p_value))
} // End of f_recv_Downlink_S1_CDMA2000_Tunnelling
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
/**
* @desc Receive S1AP Message TRACE START
* @param p_value Receive template for TRACE START IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.11.1 TRACE START
*/
function f_recv_Trace_Start(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_trace_Start(p_value))
} // End of f_recv_Trace_Start
/**
* @desc Receive S1AP Message DEACTIVATE TRACE
* @param p_value Receive template for DEACTIVATE TRACE IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.11.3 DEACTIVATE TRACE
*/
function f_recv_Deactivate_Trace(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_deactivate_Trace(p_value))
} // End of f_recv_Deactivate_Trace
/**
* @desc Receive S1AP Message LOCATION REPORTING CONTROL
* @param p_value Receive template for LOCATION_REPORTING_CONTROL IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.12.1 LOCATION REPORTING CONTROL
*/
function f_recv_Location_Reporting_Control(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_location_Reporting_Control(p_value))
} // End of f_recv_Location_Reporting_Control
/**
* @desc Receive S1AP Message WRITE-REPLACE WARNING REQUEST
* @param p_value Receive template for WRITE_REPLACE_WARNING_REQUEST IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.1 WRITE-REPLACE WARNING REQUEST
*/
function f_recv_Write_Replace_Warning_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_write_Replace_Warning_RequestResponse(p_value))
} // End of f_recv_Write_Replace_Warning_Request
/**
* @desc Receive S1AP Message KILL_REQUEST
* @param p_value Receive template forKILL_REQUEST IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.3 KILL REQUEST
*/
function f_recv_Kill_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_kill_RequestResponse(p_value))
} // End of f_recv_Kill_Request
/**
* @desc Receive S1AP Message MME DIRECT INFORMATION TRANSFER
* @param p_value Receive template for MME_DIRECT_INFORMATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.15 MME DIRECT INFORMATION TRANSFER
*/
function f_recv_Mme_Direct_Information_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_Mme_Direct_Information_Transfer(p_value))
} // End of f_recv_Mme_Configuration_Transfer
/**
* @desc Receive S1AP Message ENB CONFIGURATION TRANSFER
* @param p_value Receive template for ENB_CONFIGURATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.16 eNB CONFIGURATION TRANSFER
*/
function f_recv_eNB_Configuration_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Configuration_Transfer(p_value))
} // End of f_recv_eNB_Configuration_Transfer
/**
* @desc Receive S1AP Message MME CONFIGURATION TRANSFER
* @param p_value Receive template for MME_CONFIGURATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.17 MME CONFIGURATION TRANSFER
*/
function f_recv_Mme_Configuration_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_Mme_Configuration_Transfer(p_value))
} // End of f_recv_Mme_Configuration_Transfer
/**
* @desc Receive S1AP Message DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.19.1 DOWNLINK UE ASSOCIATED LPPA TRANSPORT
*/
function f_recv_Downlink_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_DownlinkUEAssociatedLppaTransport(p_value))
} // End of f_recv_Downlink_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.17 MME CONFIGURATION TRANSFER
*/
function f_recv_Uplink_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UplinkUEAssociatedLppaTransport(p_value))
} // End of f_recv_Uplink_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message DOWNLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for DOWNLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.19.3 DOWNLINK NON UE ASSOCIATED LPPA TRANSPORT
*/
function f_recv_Downlink_Non_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_DownlinkNonUEAssociatedLppaTransport(p_value))
} // End of f_recv_Downlink_Non_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message UPLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for UPLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.19.4 UPLINK NON UE ASSOCIATED LPPA TRANSPORT
*/
function f_recv_Uplink_Non_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UplinkNonUEAssociatedLppaTransport(p_value))
} // End of f_recv_Uplink_Non_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message HANDOVER_REQUIRED
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.5.1 HANDOVER_REQUIRED
*/
function f_recv_Handover_Required(
f_recv_HandoverCommand(p_value);
} // End of f_recv_Handover_Required
/**
* @desc Receive S1AP Message UE Context Release Request
* @param p_value Receive template for UE CONTEXT RELEASE REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.5 UE CONTEXT RELEASE REQUEST
*/
function f_recv_UE_Context_Release_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextReleaseRequest(p_value))
} // End of f_recv_UE_Context_Release_Request
/**
* @desc Receive S1AP Message UE Context Release Complete
* @param p_value Receive template for UE CONTEXT RELEASE COMPLETE
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.7 UE CONTEXT RELEASE COMPLETE
*/
function f_recv_UE_Context_Release_Complete(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextReleaseComplete(p_value))
} // End of f_recv_UE_Context_Release_Complete
/**
* @desc Receive S1AP Message UE Context Release Command
* @param p_value Receive template for UE CONTEXT RELEASE COMMAND
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.6 UE CONTEXT RELEASE COMMAND
*/
function f_recv_UE_Context_Release_Command(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextReleaseCommand(p_value))
} // End of f_recv_UE_Context_Release_Command
/**
* @desc Receive S1AP Message UE Context Modification Request
* @param p_value Receive template for UE CONTEXT MODIFICATION REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.8 UE CONTEXT MODIFICATION REQUEST
*/
function f_recv_UE_Context_Modification_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextModificationRequest(p_value))
} // End of f_recv_UE_Context_Modification_Request
/**
* @desc Receive S1AP Message UE Context Modification Response
* @param p_value Receive template for UE CONTEXT MODIFICATION RESPONSE
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.9 UE CONTEXT MODIFICATION RESPONSE
*/
function f_recv_UE_Context_Modification_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextModificationResponse(p_value))
} // End of f_recv_UE_Context_Modification_Response
/**
* @desc Receive S1AP Message UE Context Modification Failure
* @param p_value Receive template for UE CONTEXT MODIFICATION FAILURE
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.10 UE CONTEXT MODIFICATION FAILURE
*/
function f_recv_UE_Context_Modification_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextModificationFailure(p_value))
} // End of f_recv_UE_Context_Modification_Failure
/**
* @desc Receive S1AP Message UE Context Modification Indication
* @param p_value Receive template for UE CONTEXT MODIFICATION Indication
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.13 UE CONTEXT MODIFICATION Indication
*/
function f_recv_Ue_Context_Modification_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextModificationIndication(p_value))
} // End of f_recv_Ue_Context_Modification_Indication
/**
* @desc Receive S1AP Message UE Context Modification Confirm
* @param p_value Receive template for UE CONTEXT MODIFICATION Indication
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.14 UE CONTEXT MODIFICATION Confirm
*/
function f_recv_Ue_Context_Modification_Confirm(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextModificationConfirm(p_value))
} // End of f_recv_Ue_Context_Modification_Confirm
/**
* @desc Receive S1AP Message UE Context Suspend Request
* @param p_value Receive template for UE CONTEXT Suspend Request
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.15 UE CONTEXT SUSPEND Request
*/
function f_recv_Ue_Context_Suspend_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextSuspendRequest(p_value))
} // End of f_recv_Ue_Context_Suspend_Request
/**
* @desc Receive S1AP Message UE Context Suspend Response
* @param p_value Receive template for UE CONTEXT Suspend Request
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.16 UE CONTEXT SUSPEND Response
*/
function f_recv_Ue_Context_Suspend_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextSuspendResponse(p_value))
} // End of f_recv_Ue_Context_Suspend_Response
/**
* @desc Receive S1AP Message UE Context Resume Request
* @param p_value Receive template for UE CONTEXT Resume Request
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.17 UE CONTEXT Resume Request
*/
function f_recv_Ue_Context_Resume_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextResumeRequest(p_value))
} // End of f_recv_Ue_Context_Resume_Request
/**
* @desc Receive S1AP Message UE Context Resume Response
* @param p_value Receive template for UE CONTEXT Resume Request
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.18 UE CONTEXT Resume Response
*/
function f_recv_Ue_Context_Resume_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextResumeResponse(p_value))
} // End of f_recv_Ue_Context_Resume_Response
/**
* @desc Receive S1AP Message UE Context Resume Failure
* @param p_value Receive template for UE CONTEXT Resume Failure
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.19 UE CONTEXT Resume Faiure
*/
function f_recv_Ue_Context_Resume_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_UeContextResumeFailure(p_value))
/**
* @desc Receive S1AP Message UE RADIO_CAPABILITY_MATCH_RESPONSE
* @param p_value Receive template for UE_RADIO_CAPABILITY_MATCH_RESPONSE
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.12 UE_RADIO_CAPABILITY_MATCH_RESPONSE
*/
function f_recv_UeRadioCapabilityMatchResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeRadioCapabilityMatchResponse(p_value))
} // End of f_recv_UeRadioCapabilityMatchResponse
/**
* @desc Receive S1AP Message UE RADIO_CAPABILITY_MATCH_REQUEST
* @param p_value Receive template for UE_RADIO_CAPABILITY_MATCH_REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.11 UE_RADIO_CAPABILITY_MATCH_REQUEST
*/
function f_recv_UeRadioCapabilityMatchRequest(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeRadioCapabilityMatchRequest(p_value))
} // End of f_recv_UeRadioCapabilityMatchRequest
/**
* @desc Receive S1AP Message Connection Establishment Indication
* @param p_value Receive template for Connection Establishment Indication
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.20 Connection Establishment Indication
*/
function f_recv_Connection_Establishment_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_ConnectionEstablishmentIndication(p_value))
} // End of f_recv_Connection_Establishment_Indication
/**
* @desc Send functions description
*/
group sendPDU {
*/
function f_S1APPDU_Set(
inout template (value) S1AP_PDU p_PDU
) runs on S1APComponent {
if (ischosen(p_PDU.initiatingMessage)) {
vc_sendS1AP_PDU:=valueof(p_PDU);
}
vc_sendS1AP_PDU:=valueof(p_PDU);
}
vc_sendS1AP_PDU:=valueof(p_PDU);
}
* @desc Send S1AP PDU to protocol port
* @param p_PDU template value message to be send
*/
function f_send_S1AP_PDU(
in template (value) S1AP_PDU p_PDU
) runs on S1APComponent {
f_S1APPDU_Set(p_PDU);
S1_MMEeNB_P.send(p_PDU);
* @desc Send S1AP PDU with InitiatingMessage payload from protocol port
* @param p_initiatingMessage Send value template for InitiatingMessage message
in template (value) InitiatingMessage p_initiatingMessage,
in template (value) Criticality p_criticality := reject
f_send_S1AP_PDU( {initiatingMessage := p_initiatingMessage})
* @desc Send S1AP PDU with SuccessfulOutcome payload from protocol port
* @param p_successfulOutcome Send value template for SuccessfulOutcome message
*/
function f_send_S1AP_successfulOutcome(
in template (value) SuccessfulOutcome p_successfulOutcome
f_send_S1AP_PDU( {successfulOutcome := p_successfulOutcome})
* @desc Send S1AP PDU with UnsuccessfulOutcome payload from protocol port
* @param p_unsuccessfulOutcome Send value template for UnsuccessfulOutcome message
in template (value) UnsuccessfulOutcome p_unsuccessfulOutcome
) runs on S1APComponent {
f_send_S1AP_PDU( {unsuccessfulOutcome := p_unsuccessfulOutcome})
/**
* @desc Send S1AP Message E-RAB_SetupRequest
* @param p_value Send template with IE for E-RAB_SetupRequest
*/
function f_send_E_RABSetupRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABSetupRequest(p_value))
} // End of function f_send_E_RABSetupRequest
/**
* @desc Send S1AP Message E-RAB_SetupResponse
* @param p_value Send template with IE for E-RAB_SetupResponse
*/
function f_send_E_RABSetupResponse(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABSetupResponse(p_value))
} // End of function f_send_E_RABSetupResponse
/**
* @desc Send S1AP Message E-RAB_ReleaseRequest
* @param p_value Send template with IE for E-RAB_ReleaseRequest
*/
function f_send_E_RABReleaseRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABReleaseRequest(p_value))
} // End of function f_send_E_RABReleaseRequest
/**
* @desc Send S1AP Message E-RAB_ModifiedRequest
* @param p_value Send template with IE for E-RAB_ModifiedRequest
*/
function f_send_E_RABModifiedRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABModifiedRequest(p_value))
} // End of function f_send_E_RABModifiedRequest
/**
* @desc Send S1AP Message E-RAB_ModifiedInd
* @param p_value Send template with IE for E-RAB_ModifiedInd
*/
function f_send_E_RABModifiedInd(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABModifiedInd(p_value))
} // End of function f_send_E_RABModifiedInd
/**
* @desc Send S1AP Message InitialContext_SetupRequest
* @param p_value Send template with IE for InitialContext_SetupRequest
*/
function f_send_InitialContext_SetupRequest(
in template (value) RecordOf_ProtocolIE p_value,
in template (value) Criticality p_criticality := reject
f_send_S1AP_initiatingMessage(
m_InitialContextSetupRequest(
p_value,
p_criticality
))
} // End of function f_send_InitialContext_SetupRequest
/**
* @desc Send S1AP Message f_send_HandoverRequired
* @param p_value Send template with IE for HandoverRequest
*/
function f_send_HandoverRequired(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_HandoverRequired(p_value))
} // End of function f_send_HandoverRequest
/**
* @desc Send S1AP Message f_send_HandoverRequest
* @param p_value Send template with IE for HandoverRequest
*/
function f_send_HandoverRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_HandoverRequest(p_value))
} // End of function f_send_HandoverRequest
/**
* @desc Send S1AP Message f_send_HandoverRequestAcknowledge
* @param p_value Send template with IE for HandoverRequestAcknowledge
*/
function f_send_HandoverRequestAcknowledge(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_HandoverRequestAcknowledge(p_value))
} // End of function f_send_HandoverRequestAcknowledge
/**
* @desc Send S1AP Message f_send_HandoverCancel
* @param p_value Send template with IE for HandoverCancel
*/
function f_send_HandoverCancel(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_HandoverCancel(p_value))
} // End of function f_send_HandoverCancel
/**
* @desc Send S1AP Message Handover Cancel Acknowledge
* @param p_value Send template with IE for Handover Cancel Acknowledge
*/
function f_send_HandoverCancelAcknowledge(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_HandoverCancelAck(p_value))
} // End of function f_send_HandoverCancelAcknowledge
/**
* @desc Send S1AP Message ENB STATUS TRANSFER
* @param p_value Send template with IE for ENB STATUS TRANSFER
*/
function f_send_eNB_Status_Transfer(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_eNB_Status_Transfer(p_value))
} // End of function f_send_eNB_Status_Transfer
/**
* @desc Send S1AP Message Handover Command
* @param p_value Send template with IE for Handover Command
*/
function f_send_HandoverCommand(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_HandoverCommand(p_value))
} // End of function f_send_HandoverCommand
/**
* @desc Send S1AP Message Path Switch Request
* @param p_value Send template with IE for Path Switch Request
*/
function f_send_PathSwitchRequest(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_PathSwitchRequest(p_value))
} // End of function f_send_PathSwitchRequestAcknowledge
/**
* @desc Send S1AP Message Path Switch Request Acknowledge
* @param p_value Send template with IE for Path Switch Request Acknowledge
*/
function f_send_PathSwitchRequestAcknowledge(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_PathSwitchRequestAck(p_value))
} // End of function f_send_PathSwitchRequestAcknowledge
* @desc Send S1AP Message S1 SETUP RESPONSE
* @param p_value Send template with IE for S1 SETUP RESPONSE
*/
function f_send_S1_Setup_Response(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_s1_Setup_Response(p_value))
} // End of function f_send_S1_Setup_Response
/**
* @desc Send S1AP Message ENB CONFIGURATION UPDATE ACKNOWLEDGE
* @param p_value Send template with IE for ENB CONFIGURATION UPDATE ACKNOWLEDGE
*/
function f_send_eNB_Configuration_Update_Acknowledge(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_eNB_Configuration_Update_Acknowledge(p_value))
} // End of function f_send_eNB_Configuration_Update_Acknowledge
* @param p_value Send template with IE for RESET
*/
function f_send_Reset(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_reset(p_value))
} // End of function f_send_Reset
/**
* @desc Send S1AP Message S1 SETUP REQUEST
* @param p_value Send template with IE for S1 SETUP REQUEST
*/
function f_send_S1_Setup_Request(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_s1_Setup_Request(p_value))
} // End of function f_send_S1_Setup_Request
/**
* @desc Send S1AP Message ENB CONFIGURATION UPDATE
* @param p_value Send template with IE for ENB CONFIGURATION UPDATE
*/
function f_send_eNB_Configuration_Update(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_eNB_Configuration_Update(p_value))
} // End of function f_send_eNB_Configuration_Update
/**
* @desc Send S1AP Message MME CONFIGURATION UPDATE
* @param p_value Send template with IE for MME CONFIGURATION UPDATE
*/
function f_send_MME_Configuration_Update(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_mME_Configuration_Update(p_value))
} // End of function f_send_MME_Configuration_Update
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
/**
* @desc Send S1AP Message TRACE START
* @param p_value Send template with IE for TRACE START
*/
function f_send_Trace_Start(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_trace_Start(p_value))
} // End of function f_send_Trace_Start
/**
* @desc Send S1AP Message DEACTIVATE TRACE
* @param p_value Send template with IE for DEACTIVATE TRACE
*/
function f_send_deactivate_Trace(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_deactivate_Trace(p_value))
} // End of function f_send_deactivate_Trace
/**
* @desc Send S1AP Message LOCATION REPORTING CONTROL
* @param p_value Send template with IE for LOCATION REPORTING CONTROL
*/
function f_send_Location_Reporting_Control(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_location_Reporting_Control(p_value))
} // End of function f_send_Location_Reporting_Control
/**
* @desc Send S1AP Message LOCATION REPORT FAILURE INDICATION
* @param p_value Receive template for LOCATION REPORT FAILURE INDICATION IEs
*/
function f_send_Location_Report_Failure_Indication(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_location_Report_Failure_Indication(p_value))
} // End of f_send_Location_Report_Failure_Indication
/**
* @desc Send S1AP Message WRITE-REPLACE WARNING REQUEST
* @param p_value Send template with IE for WRITE-REPLACE WARNING REQUEST
*/
function f_send_Write_Replace_Warning_Request(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_write_Replace_Warning_Request(p_value))
} // End of function f_send_Write_Replace_Warning_Request
/**
* @desc Send S1AP Message WRITE-REPLACE WARNING RESPONSE
* @param p_value Send template with IE for WRITE-REPLACE WARNING RESPONSE
*/
function f_send_Write_Replace_Warning_Response(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_write_Replace_Warning_Response(p_value))
} // End of function f_send_Write_Replace_Warning_Response
/**
* @desc Send S1AP Message KILL REQUEST
* @param p_value Send template with IE for KILL REQUEST
*/
function f_send_Kill_Request(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_kill_Request(p_value))
} // End of function f_send_Kill_Request
/**
* @desc Send S1AP Message KILL REQUEST
* @param p_value Send template with IE for KILL REQUEST
*/
function f_send_Kill_Response(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_kill_Response(p_value))
} // End of function f_send_Kill_Response
/**
* @desc Send S1AP Message UE Context Release Command
* @param p_value Send template for UE CONTEXT RELEASE REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.6 UE CONTEXT RELEASE COMMAND
*/
function f_send_UE_Context_Release_Command(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextReleaseCommand(p_value))
} // End of f_send_UE_Context_Release_Command
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
/**
* @desc Send S1AP Message UE Context Release Complete
* @param p_value Send template for UE CONTEXT RELEASE COMPLETE
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.7 UE CONTEXT RELEASE COMPLETE
*/
function f_send_UE_Context_Release_Complete(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextReleaseComplete(p_value))
} // End of f_send_UE_Context_Release_Command
/**
* @desc Send S1AP Message UE Context Release Request
* @param p_value Receive template for UE CONTEXT RELEASE REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.5 UE CONTEXT RELEASE REQUEST
*/
function f_send_UE_Context_Release_Request(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextReleaseRequest(p_value))
} // End of f_send_UE_Context_Release_Request
/**
* @desc Send S1AP Message UE Context Suspend Request
* @param p_value Receive template for UE CONTEXT SUSPEND REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.15 UE CONTEXT SUSPEND REQUEST
*/
function f_send_UE_Context_Suspend_Request(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextSuspendRequest(p_value))
} // End of f_send_UE_Context_Suspend_Request
/**
* @desc Send S1AP Message UE Context Modification Request
* @param p_value Send template for UE CONTEXT MODIFICATION REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.8 UE CONTEXT MODIFICATION COMMAND
*/
function f_send_UE_Context_Modification_Request(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextModificationRequest(p_value))
} // End of f_send_UE_Context_Modification_Request
/**
* @desc Send S1AP Message UE Context Modification Indication
* @param p_value Send template for UE CONTEXT MODIFICATION INDICATION
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.13 UE CONTEXT MODIFICATION INDICATION
*/
function f_send_UE_Context_Modification_Indication(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextModificationIndication(p_value))
} // End of f_send_UE_Context_Modification_Request
/**
* @desc Send S1AP Message UE Context Resume Request
* @param p_value Send template for UE CONTEXT RESUME REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.17 UE CONTEXT RESUME REQUEST
*/
function f_send_Ue_Context_Resume_Request(
in template (value) RecordOf_ProtocolIE p_value,
in template (value) Criticality p_criticality := reject
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(
m_UeContextResumeRequest(
p_value,
p_criticality
)
)
} // End of f_send_UE_Context_Modification_Request
/**
* @desc Send S1AP Message UE Radio Capability Match Request
* @param p_value Send template for UE_RADIO_CAPABILITY_MATCH_REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.11 UE CONTEXT MODIFICATION COMMAND
*/
function f_send_UE_Radio_Capability_Match_Request(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeRadioCapabilityMatchRequest(p_value))
} // End of f_send_UE_Radio_Capability_Match_Request
/**
* @desc Setup full procedure functions
* @see ETSI TS 136 413 V13.4.0 Clause 8.1 List of S1AP Elementary procedures
*/
group fullProcedures {
/**
* @desc Setup a full E-RAB Setup procedure
*/
function f_rABSetupRequest() runs on S1APComponent {
f_send_E_RABSetupRequest(m_E_RABSetupReqIEs(
vc_MME_UE_ID,
{
m_E_RABToBeSetupItemBearerSUReq(1),
m_E_RABToBeSetupItemBearerSUReq(
2,
m_e_RABlevelQoSParameters
(255)
)
}
));
f_recv_E_RABSetupResponse(mw_E_RABSetupResIEs_FailedToSetupList_E_RABSetupItemBearerSURes(
vc_MME_UE_ID,
{
mw_E_RABSetupItemBearerSURes(1)
},
{
mw_E_RABItem(
2,
{
radioNetwork :=not_supported_QCI_value
}
)
}
));
} // End of function f_rABSetupRequest
/**
* @desc Setup an initial Context E-RAB Setup procedure
*/
function f_rABInitialContextSetup(
in template (value) RecordOf_E_RABToBeSetupItemCtxtSUReq p_RecordOf_E_RABToBeSetupItemCtxt_value
) runs on S1APComponent {
f_send_InitialContext_SetupRequest(m_InitialContextSetupReqIEs(
vc_MME_UE_ID,
vc_eNB_UE_ID,
m_UEAggregateMaximumBitrate(1,1),
p_RecordOf_E_RABToBeSetupItemCtxt_value,
m_UESecurityCapabilities(PX_ENCRYPTION_ALGORITHM,
PX_INTEGRITY_PROTECTION_ALGORITHM),
m_securityKey
));
f_recv_InitialContext_SetupResponse(mw_InitialContextSetupResIEs(
vc_MME_UE_ID,
vc_eNB_UE_ID,
{
mw_E_RABSetupItemBearerSURes
}
));
} // End of function f_rABInitialContextSetup
/**
* @desc Setup a full E-RAB Release procedure
*/
function f_rABSetupRelease() runs on S1APComponent {
// Local variables
const E_RAB_ID c_E_RAB_ID_A := 0;
f_send_E_RABReleaseRequest(m_E_RABReleaseReqIEs(
vc_MME_UE_ID,
vc_eNB_UE_ID,
{
m_E_RABItem(
c_E_RAB_ID_A,
)
}
));
f_recv_E_RABReleaseResponse(mw_E_RABReleaseResIEs(
vc_MME_UE_ID,
vc_eNB_UE_ID,
{
mw_E_RABItem(
c_E_RAB_ID_A
)
}
));
} // End of function f_rABSetupRelease
/**
* @desc Initiate an Handover procedure
*/
function f_initiate_handover() runs on S1APComponent {
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
// Local variables
const Source_ToTarget_TransparentContainer c_source_ToTarget_TransparentContainer := '12121212'O;
f_send_HandoverRequest(
m_HandoverReqIEs(
vc_MME_UE_ID,
intralte, // Handover Type
m_cause_ran(
successful_handover
), // Cause
m_UEAggregateMaximumBitrate(1,1), // UE Aggregate_Max_Bit_Rate
{
m_E_RABToBeSetupItemHOReq (
-,
-,
-,
m_e_RABlevelQoSParameters (5)
)
}, // E_RabsToBeSetupList
c_source_ToTarget_TransparentContainer, // SourceToTargetTransparentContainer
m_UESecurityCapabilities(
PX_ENCRYPTION_ALGORITHM,
PX_INTEGRITY_PROTECTION_ALGORITHM
), // UeSecurityCapabilities
m_securityContext // SecurityContext
));
} // End of function f_initiate_handover
/**
* @desc Initiate a Trace Start procedure
*/
function f_initiate_traceStart() runs on S1APComponent {
f_send_Trace_Start(
m_trace_StartIEs(
m_traceActivation(
PX_EUTRAN_TRACE_ID,
PX_INTERFACES_TO_TRACE,
PX_TRACE_DEPTH,
PX_TRANSPORT_LAYER_ADDRESS
)));
} // End of function f_initiate_traceStart
/**
* @desc Initiate a Deactivate Trace procedure
*/
function f_initiate_deactivateTrace() runs on S1APComponent {
f_send_deactivate_Trace(
m_deactivate_TraceIEs(
vc_MME_UE_ID,
vc_eNB_UE_ID,
PX_EUTRAN_TRACE_ID
));
} // End of function f_initiate_deactivateTrace
/**
* @desc Initiate a an Write-Replace Warning Request procedure
*/
function f_writeReplaceWarningExchanges() runs on S1APComponent {
if (fx_MME_Write_Replace_Warning_procedure() == true) {
f_recv_Write_Replace_Warning_Request(
mw_write_Replace_Warning_RequestIEs(
PX_MESSAGE_IDENTIFIER,
PX_SERIAL_NUMBER,
PX_REPETITION_PERIOD,
PX_NUMBER_OF_BROADCASTS_REQUESTED
));
f_send_Write_Replace_Warning_Response(
m_write_Replace_Warning_ResponseIEs(
PX_MESSAGE_IDENTIFIER,
PX_SERIAL_NUMBER
));
f_selfOrClientSyncAndVerdict(c_tbDone, f_getVerdict());
}
} // End of group fullProcedures
group externalFunctions {
/**
* @desc Trigger a Handover preparation procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Handover_preparation_procedure() return boolean;
/**
* @desc Trigger a Handover notification procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Handover_notification_procedure() return boolean;
/**
* @desc Trigger a Path switch request procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Path_switch_request_procedure() return boolean;
/**
* @desc Trigger an INITIAL UE MESSAGE procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Initiate_NAS_transport_procedure() return boolean;
/**
* @desc Trigger an INITIAL UE MESSAGE procedure
* @return true on success, false otherwise
*/
external function fx_eNB_NAS_transport_procedure() return boolean;
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
/**
* @desc Trigger an S1 SETUP procedure
* @return true on success, false otherwise
*/
external function fx_eNB_S1_Setup_Request_procedure() return boolean;
/**
* @desc Trigger an eNB Configuration Update procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Configuration_Update_procedure() return boolean;
/**
* @desc Trigger an an Overload Start procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Overload_Start_procedure() return boolean;
/**
* @desc Trigger an an Overload Stop procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Overload_Stop_procedure() return boolean;
/**
* @desc Trigger an Error Indication procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Error_Indication_procedure() return boolean;
/**
* @desc Trigger a RESET procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Reset_procedure() return boolean;
/**
* @desc Trigger a CDMA2000 to be forwarded procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Uplink_S1_CDMA2000_Tunnelling_procedure() return boolean;
/**
* @desc Trigger a UE CAPABILITY INFO INDICATION procedure
* @return true on success, false otherwise
*/
external function fx_eNB_UE_Capability_Info_Indication_procedure() return boolean;
/**
* @desc Force the UE to be registered to a new cell
* @return true on success, false otherwise
*/
external function fx_move_UE_to_new_cell() return boolean;
/**
* @desc Check htat UE stop reporting at change of serving cell
* @return true on success, false otherwise
*/
external function fx_check_UE_stops_reporting() return boolean;
/**
* @desc Trigger a PWS Restart Indication procedure
* @return true on success, false otherwise
*/
external function fx_eNB_PWS_Restart_Indication_procedure() return boolean;
/**
* @desc Trigger a PWS Failure Indication procedure
* @return true on success, false otherwise
*/
external function fx_eNB_PWS_Failure_Indication_procedure() return boolean;
/**
* @desc Trigger an ENB direct information Transfer procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Direct_Information_Transfer_procedure() return boolean;
/**
* @desc Trigger an ENB Configuration Transfer procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Configuration_Transfer_procedure() return boolean;
/**
* @desc Trigger a LPPa Transport procedure using a UE associated signalling on eNodeB
* @param p_associated_signalling_mode Set to true for an associated signalling mode, false otherwise
* @return true on success, false otherwise
*/
external function fx_eNB_LPPa_Transport_procedure_ind(
in boolean p_associated_signalling_mode
) return boolean;
} // End of group eNBRole
group mmeRole {
/**
* @desc Trigger a Handover preparation procedure
* @return true on success, false otherwise
*/
external function fx_MME_Handover_preparation_procedure() return boolean;
/**
* @desc Trigger a Handover notification procedure
* @return true on success, false otherwise
*/
external function fx_MME_Handover_notification_procedure() return boolean;
/**
* @desc Trigger a PAGING event
* @return true on success, false otherwise
*/
external function fx_MME_Paging_procedure() return boolean;
/**
* @desc Trigger a DOWNLINK NAS TRANSPORT event
* @return true on success, false otherwise
*/
external function fx_MME_Downlink_NAS_Transport_procedure() return boolean;
/**
* @desc Trigger a REROUTE NAS REQUEST event
* @return true on success, false otherwise
*/
external function fx_MME_Reroute_NAS_Request_procedure() return boolean;
/**
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
* @desc Trigger a RESET event
* @return true on success, false otherwise
*/
external function fx_MME_Reset_procedure() return boolean;
/**
* @desc Trigger an ERROR INDICATION event
* @return true on success, false otherwise
*/
external function fx_MME_Error_Indication_procedure() return boolean;
/**
* @desc Trigger a CDMA2000 signalling event
* @return true on success, false otherwise
*/
external function fx_MME_Downlink_S1_CDMA2000_Tunnelling_procedure() return boolean;
/**
* @desc Trigger a Trace Start procedure
* @return true on success, false otherwise
*/
external function fx_MME_Trace_Start_procedure() return boolean;
/**
* @desc Trigger a Deactivate Trace procedure
* @return true on success, false otherwise
*/
external function fx_MME_Deactivate_Trace_procedure() return boolean;
/**
* @desc Trigger a Location Reporting Control procedure
* @return true on success, false otherwise
*/
external function fx_MME_Location_Reporting_Control_procedure() return boolean;
/**
* @desc Trigger a Write-Replace Warning procedure
* @return true on success, false otherwise
*/
external function fx_MME_Write_Replace_Warning_procedure() return boolean;
/**
* @desc Trigger a Kill procedure
* @return true on success, false otherwise
*/
external function fx_MME_Kill_procedure() return boolean;
/**
* @desc Trigger an MME Direct Information Transfer procedure
* @return true on success, false otherwise
*/
external function fx_MME_Direct_Information_Transfer_procedure() return boolean;
/**
* @desc Trigger an MME Configuration Transfer procedure
* @return true on success, false otherwise
*/
external function fx_MME_Configuration_Transfer_procedure() return boolean;
/**
* @desc Trigger a LPPa Transport procedure using a UE associated signalling on MME
* @param p_associated_signalling_mode Set to true for an associated signalling mode, false otherwise
* @return true on success, false otherwise
*/
external function fx_MME_LPPa_Transport_procedure_ind(
in boolean p_associated_signalling_mode
) return boolean;
/**
* @desc Trigger a E-RAB Release procedure
* @return true on success, false otherwise
*/
external function fx_eNB_erab_Release_indication_procedure() return boolean;
external function fx_eNB_erab_modification_indication_procedure () return boolean;
} // End of group externalFunctions
function f_preambleS1AP_MME()
runs on S1APComponent {
function f_preambleS1AP_eNB()
runs on S1APComponent {
} // End of function f_preambleS1AP_eNB
} // End of group preamble_S1AP
function f_postambleS1AP_eNB()
runs on S1APComponent {
} // End of function f_postambleS1AP_eNB
} // End of group postamble_S1AP
} // End of group postambles
/**
* @desc Global 'altstep' statements description
*/
group globalSteps {
/**
* @desc This is a test step that init S1AP component
*/
function f_S1AP_Init_Component()
runs on S1APComponent {
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
} // End of function f_S1AP_Init_Component
/**
* @desc Component termination
*/
function f_S1AP_terminate_component()
runs on S1APComponent {
log("component terminated - forced!");
deactivate;
stop;
} // End of function f_S1AP_terminate_component
/**
* @desc Component termination
*/
function f_componentStop()
runs on S1APComponent {
syncPort.send(m_syncClientStop);
S1_MMEeNB_P.clear;
stop;
} // End of function f_componentStop
/**
* @desc Original copied from older LibCommon_VerdictControl
*/
function f_getVerdict() // FIXME Are you sure we really need it???
return FncRetCode {
var FncRetCode v_ret := e_error;
if (getverdict == pass or getverdict == none) {
v_ret := e_success;
}
return v_ret;
} // End of function
} // End of group globalSteps
/**
* @desc Default 'altstep' statements description
*/
group defaultsTestStep {
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
runs on S1APComponent {
[] any timer.timeout {
all timer.stop;
if (vc_serverStop==false) {
f_selfOrClientSyncAndVerdict("error", e_timeout);
}
else {
stop;
}
}
[] S1_MMEeNB_P.receive (S1AP_PDU:{initiatingMessage := ?}) -> value vc_recvS1AP_PDUDefault {
repeat;
}
[] S1_MMEeNB_P.receive (S1AP_PDU:{successfulOutcome := ?}) -> value vc_recvS1AP_PDUDefault {
repeat;
}
[] S1_MMEeNB_P.receive (S1AP_PDU:{unsuccessfulOutcome := ?}) -> value vc_recvS1AP_PDUDefault {
repeat;
}
[] S1_MMEeNB_P.receive (S1AP_PDU:?) -> value vc_recvS1AP_PDUDefault {
if (vc_serverStop==false) {
f_selfOrClientSyncAndVerdict("error", e_error);
}
else {
stop;
}
}
[] S1_MMEeNB_P.receive {
if (vc_serverStop==false) {
f_selfOrClientSyncAndVerdict("error", e_error);
}
else {
stop;
}
}
[] a_shutdown() {
// Process temination on error
log("*** a_defaultS1AP() : Process temination on error ***");
// Terminate component execution
stop;
}
runs on S1APComponent {
[] any timer.timeout {
all timer.stop;
if (vc_serverStop==false) {
f_selfOrClientSyncAndVerdict("error", e_timeout);
}
else {
stop;
}
}
runs on S1APComponent {
[] any timer.timeout {
all timer.stop;
if (vc_serverStop==false) {
f_selfOrClientSyncAndVerdict("error", e_timeout);
}
else {
stop;
}
}