Newer
Older
* @version $URL$
* $Id$
* @desc This module provides functions used in S1AP.
* @copyright ETSI Copyright Notification
* No part may be reproduced except as authorized by written permission.
* The copyright and the foregoing restriction extend to reproduction in all media.
* All rights reserved.
* @see ETSI TS 136 413 / 3GPP TS 36.413 version 13.4.0 Release 13
import from LibCommon_VerdictControl all;
import from LibCommon_BasicTypesAndValues all;
import from S1AP_PDU_Descriptions language "ASN.1:1997" all;
import from LibS1AP_Interface all;
import from LibS1AP_Pixits all;
import from LibS1AP_Templates all;
/**
* @desc Common functions description
*/
group commonFunctions {
* @desc Indicate if the provided value is greather or equal to 0
* @return true if value of p_int greater than 0
* @param p_int - integer value
*/
function f_gtZero( // FIXME Do we really need a function for <= mathematical operation???
if (p_int > 0){
return true;
}
else{
return false;
}
* @desc Increment the provided value by one
* @return incremented value of p_int 0
* @param p_int - integer value
*/
function f_inc(
inout UInt32 p_int
) return UInt32 {
/**
* @desc Receive functions description
*/
group receivePDU {
*/
function f_S1APPDU_Get(
inout S1AP_PDU p_PDU
) runs on S1APComponent {
vc_recvS1AP_PDU := p_PDU;
if (ischosen(p_PDU.initiatingMessage)) {
//TODO...
}
if (ischosen(p_PDU.successfulOutcome)) {
//TODO...
}
if (ischosen(p_PDU.unsuccessfulOutcome)) {
//TODO...
}
} // End of function f_S1APPDU_Get
/**
* @param p_PDU template of the message to be received
*/
function f_recv_S1AP_PDU(
in template S1AP_PDU p_PDU
) runs on S1APComponent {
[] tc_wait.timeout {
setverdict(inconc,"*** " & __SCOPE__ & ": INCONC: Message was not received in due time. ***");
all timer.stop;
f_componentStop();
}
* @desc Receive S1AP PDU with InitiatingMessage payload from protocol port
* @param p_initiatingMessage Receive template for InitiatingMessage message
} // End of function f_recv_S1AP_initiatingMessage
/**
* @desc Receive S1AP PDU with SuccessfulOutcome payload from protocol port
* @param p_successfulOutcome Receive template for SuccessfulOutcome message
f_recv_S1AP_PDU( {successfulOutcome := p_successfulOutcome})
* @desc Receive S1AP PDU with UnsuccessfulOutcome payload from protocol port
* @param p_unsuccessfulOutcome Receive template for UnsuccessfulOutcome message
template (present) UnsuccessfulOutcome p_unsuccessfulOutcome := ?
f_recv_S1AP_PDU( {unsuccessfulOutcome := p_unsuccessfulOutcome})
/**
* @desc Receive S1AP Message E_RABSetupResponse
* @param p_value Receive template for E_RABSetupResponse IEs
*/
function f_recv_E_RABSetupResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABSetupResponse(p_value))
} // End of f_recv_E_RABSetupResponse
/**
* @desc Receive S1AP Message E_RABModifiedResponse
* @param p_value Receive template for E_RABModifiedResponse IEs
*/
function f_recv_E_RABModifiedResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_E_RABModifiedResponse(p_value))
} // End of f_recv_E_RABModifiedResponse
/**
* @desc Receive S1AP Message InitialContext_SetupResponse
* @param p_value Receive template for InitialContext_SetupResponse IEs
*/
function f_recv_InitialContext_SetupResponse(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_InitialContextSetupResponse(p_value))
} // End of f_recv_InitialContext_SetupResponse
/**
* @desc Receive S1AP Message INITIAL UE MESSAGE
* @param p_value Receive template for INITIAL UE MESSAGE IEs
*/
function f_recv_Initial_UE_Message(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_initial_uE_Message(p_value))
} // End of f_recv_Initial_UE_Message
* @desc Receive S1AP Message S1 SETUP REQUEST
* @param p_value Receive template for S1 SETUP REQUEST IEs
*/
function f_recv_S1_Setup_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_s1_Setup_Request(p_value))
} // End of f_recv_S1_Setup_Request
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
/**
* @desc Receive S1AP Message ENB CONFIGURATION UPDATE
* @param p_value Receive template for ENB CONFIGURATION UPDATE IEs
*/
function f_recv_eNB_Configuration_Update(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Configuration_Update(p_value))
} // End of f_recv_eNB_Configuration_Update
/**
* @desc Receive S1AP Message OVERLOAD START
* @param p_value Receive template for OVERLOAD START IEs
*/
function f_recv_eNB_Overload_Start(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Overload_Start(p_value))
} // End of f_recv_eNB_Overload_Start
/**
* @desc Receive S1AP Message OVERLOAD STOP
* @param p_value Receive template for OVERLOAD STOP IEs
*/
function f_recv_eNB_Overload_Stop(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Overload_Stop(p_value))
} // End of f_recv_eNB_Overload_Stop
/**
* @desc Receive S1AP Message ERROR_INDICATION
* @param p_value Receive template for ERROR_INDICATION IEs
*/
function f_recv_Error_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_error_Indication(p_value))
} // End of f_recv_Error_Indication
/**
* @desc Receive S1AP Message S1 SETUP RESPONSE
* @param p_value Receive template for S1 SETUP RESPONSE IEs
*/
function f_recv_S1_Setup_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_s1_Setup_Response(p_value))
} // End of f_recv_S1_Setup_Response
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
/**
* @desc Receive S1AP Message S1 SETUP FAILURE
* @param p_value Receive template for S1 SETUP FAILURE IEs
*/
function f_recv_S1_Setup_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_s1_Setup_Failure(p_value))
} // End of f_recv_S1_Setup_Failure
/**
* @desc Receive S1AP Message ENB CONFIGURATION UPDATE ACKNOWLEDGE
* @param p_value Receive template for ENB CONFIGURATION UPDATE ACKNOWLEDGE IEs
*/
function f_recv_eNB_Configuration_Update_Acknowledge(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_eNB_Configuration_Update_Acknowledge(p_value))
} // End of f_recv_eNB_Configuration_Update_Acknowledge
/**
* @desc Receive S1AP Message ENB CONFIGURATION UPDATE FAILURE
* @param p_value Receive template for ENB CONFIGURATION UPDATE FAILURE IEs
*/
function f_recv_eNB_Configuration_Update_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_eNB_Configuration_Update_Failure(p_value))
} // End of f_recv_eNB_Configuration_Update_Failure
/**
* @desc Receive S1AP Message MME CONFIGURATION UPDATE ACKNOWLEDGE
* @param p_value Receive template for MME CONFIGURATION UPDATE ACKNOWLEDGE IEs
*/
function f_recv_MME_Configuration_Update_Acknowledge(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_mME_Configuration_Update_Acknowledge(p_value))
} // End of f_recv_MME_Configuration_Update_Acknowledge
/**
* @desc Receive S1AP Message MME CONFIGURATION UPDATE FAILURE
* @param p_value Receive template for MME CONFIGURATION UPDATE FAILURE IEs
*/
function f_recv_MME_Configuration_Update_Failure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_mME_Configuration_Update_Failure(p_value))
} // End of f_recv_MME_Configuration_Update_Failure
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
/**
* @desc Receive S1AP Message DOWNLINK NAS TRANSPORT
* @param p value Receive template for DOWNLINK NAS TRANSPORT IEs
*/
function f_recv_Downlink_NAS_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_downlink_nAS_Transport(p_value))
} // End of f_recv_Downlink_NAS_Transport
/**
* @desc Receive S1AP Message UPLINK NAS TRANSPORT
* @param p value Receive template for UPLINK NAS TRANSPORT IEs
*/
function f_recv_Uplink_NAS_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_uplink_nAS_Transport(p_value))
} // End of f_recv_Uplink_NAS_Transport
/**
* @desc Receive S1AP Message sends a NAS NON DELIVERY INDICATION
* @param p value Receive template for NAS NON DELIVERY INDICATION IEs
*/
function f_recv_NAS_Non_Delivery_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_nAS_Non_Delivery_Indication(p_value))
} // End of f_recv_NAS_Non_Delivery_Indication
/**
* @desc Receive S1AP Message REROUTE NAS REQUEST
* @param p value Receive template for REROUTE NAS REQUEST IEs
*/
function f_recv_Reroute_NAS_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_reroute_nAS_Request(p_value))
} // End of f_recv_Reroute_NAS_Request
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
/**
* @desc Receive S1AP Message RESET
* @param p_value Receive template for RESET IEs
*/
function f_recv_Reset(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_reset(p_value))
} // End of f_recv_Reset
/**
* @desc Receive S1AP Message RESET ACKNOWLEDGE
* @param p_value Receive template for RESET ACKNOWLEDGE IEs
*/
function f_recv_Reset_Acknowledge(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_reset_Acknowledge(p_value))
} // End of f_recv_Reset_Acknowledge
/**
* @desc Receive S1AP Message an UPLINK S1 CDMA2000 TUNNELLING
* @param p_value Receive template for UPLINK S1 CDMA2000 TUNNELLING IEs
*/
function f_recv_Uplink_S1_CDMA2000_Tunnelling(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_uplink_S1_CDMA2000_Tunnelling(p_value))
} // End of f_recv_Uplink_S1_CDMA2000_Tunnelling
/**
* @desc Receive S1AP Message UE CAPABILITY INFO INDICATION
* @param p_value Receive template for UE CAPABILITY INFO INDICATION IEs
*/
function f_recv_eNB_UE_Capability_Info_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_uE_Capability_Info_Indication(p_value))
} // End of f_recv_eNB_UE_Capability_Info_Indication
/**
* @desc Receive S1AP Message TRACE FAILURE INDICATION
* @param p_value Receive template for TRACE FAILURE INDICATION IEs
*/
function f_recv_Trace_Failure_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_trace_Failure_Indication(p_value))
} // End of f_recv_Trace_Failure_Indication
/**
* @desc Receive S1AP Message CELL TRAFFIC TRACE
* @param p_value Receive template for CELL TRAFFIC TRACE IEs
*/
function f_recv_Cell_Traffic_Trace(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_cell_Traffic_Trace(p_value))
} // End of f_recv_Cell_Traffic_Trace
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
/**
* @desc Receive S1AP Message LOCATION REPORT
* @param p_value Receive template for LOCATION REPORT IEs
*/
function f_recv_Location_Report(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_location_Report(p_value))
} // End of f_recv_Location_Report
/**
* @desc Receive S1AP Message LOCATION REPORT FAILURE INDICATION
* @param p_value Receive template for LOCATION REPORT FAILURE INDICATION IEs
*/
function f_recv_Location_Report_Failure_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_location_Report_Failure_Indication(p_value))
} // End of f_recv_Location_Report_Failure_Indication
/**
* @desc Receive S1AP Message WRITE-REPLACE WARNING RESPONSE
* @param p_value Receive template for WRITE-REPLACE WARNING RESPONSE IEs
*/
function f_recv_Write_Replace_Warning_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_write_Replace_Warning_Response(p_value))
} // End of f_recv_Write_Replace_Warning_Response
/**
* @desc Receive S1AP Message WRITE-REPLACE WARNING RESPONSE
* @param p_value Receive template for WRITE-REPLACE WARNING RESPONSE IEs
*/
function f_recv_Kill_Response(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_successfulOutcome(mw_kill_Response(p_value))
} // End of f_recv_Kill_Response
/**
* @desc Receive S1AP Message PWS RESTART INDICATION
* @param p_value Receive template for PWS_RESTART_INDICATION IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.5 PWS RESTART INDICATION
*/
function f_recv_eNB_PWS_Restart_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_pWS_Restart_Indication(p_value))
} // End of f_recv_eNB_PWS_Restart_Indication
/**
* @desc Receive S1AP Message PWS FAILURE INDICATION
* @param p_value Receive template for PWS_FAILURE_INDICATION IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.6 PWS FAILURE INDICATION
*/
function f_recv_eNB_PWS_Failure_Indication(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_pWS_Failure_Indication(p_value))
} // End of f_recv_eNB_PWS_Failure_Indication
/**
* @desc Receive S1AP Message ENB DIRECT INFORMATION TRANSFER
* @param p_value Receive template for ENB_DIRECT_INFORMATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.14 eNB DIRECT INFORMATION TRANSFER
*/
function f_recv_eNB_Direct_Information_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Direct_Information_Transfer(p_value))
} // End of f_recv_eNB_Configuration_Transfer
/**
* @desc Receive S1AP Message DOWNLINK S1 CDMA2000 TUNNELLING
* @param p_value Receive template for DOWNLINK S1 CDMA2000 TUNNELLING IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.9.1 DOWNLINK S1 CDMA2000 TUNNELLING
*/
function f_recv_Downlink_S1_CDMA2000_Tunnelling(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_downlink_S1_CDMA2000_Tunnelling(p_value))
} // End of f_recv_Downlink_S1_CDMA2000_Tunnelling
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
/**
* @desc Receive S1AP Message TRACE START
* @param p_value Receive template for TRACE START IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.11.1 TRACE START
*/
function f_recv_Trace_Start(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_trace_Start(p_value))
} // End of f_recv_Trace_Start
/**
* @desc Receive S1AP Message DEACTIVATE TRACE
* @param p_value Receive template for DEACTIVATE TRACE IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.11.3 DEACTIVATE TRACE
*/
function f_recv_Deactivate_Trace(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_deactivate_Trace(p_value))
} // End of f_recv_Deactivate_Trace
/**
* @desc Receive S1AP Message LOCATION REPORTING CONTROL
* @param p_value Receive template for LOCATION_REPORTING_CONTROL IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.12.1 LOCATION REPORTING CONTROL
*/
function f_recv_Location_Reporting_Control(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_location_Reporting_Control(p_value))
} // End of f_recv_Location_Reporting_Control
/**
* @desc Receive S1AP Message WRITE-REPLACE WARNING REQUEST
* @param p_value Receive template for WRITE_REPLACE_WARNING_REQUEST IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.1 WRITE-REPLACE WARNING REQUEST
*/
function f_recv_Write_Replace_Warning_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_write_Replace_Warning_RequestResponse(p_value))
} // End of f_recv_Write_Replace_Warning_Request
/**
* @desc Receive S1AP Message KILL_REQUEST
* @param p_value Receive template forKILL_REQUEST IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.13.3 KILL REQUEST
*/
function f_recv_Kill_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_kill_RequestResponse(p_value))
} // End of f_recv_Kill_Request
/**
* @desc Receive S1AP Message MME DIRECT INFORMATION TRANSFER
* @param p_value Receive template for MME_DIRECT_INFORMATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.15 MME DIRECT INFORMATION TRANSFER
*/
function f_recv_Mme_Direct_Information_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_Mme_Direct_Information_Transfer(p_value))
} // End of f_recv_Mme_Configuration_Transfer
/**
* @desc Receive S1AP Message ENB CONFIGURATION TRANSFER
* @param p_value Receive template for ENB_CONFIGURATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.16 eNB CONFIGURATION TRANSFER
*/
function f_recv_eNB_Configuration_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_eNB_Configuration_Transfer(p_value))
} // End of f_recv_eNB_Configuration_Transfer
/**
* @desc Receive S1AP Message MME Direct Information Transfer
* @param p_value Receive template for MME DIRECT INFORMATION TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.15 MME DIRECT INFORMATION TRANSFER
*/
function f_MME_Direct_Information_Transfer_procedure(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_Mme_Configuration_Transfer(p_value))
} // End of fx_MME_Direct_Information_Transfer_procedure
/**
* @desc Receive S1AP Message MME CONFIGURATION TRANSFER
* @param p_value Receive template for MME_CONFIGURATION_TRANSFER IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.17 MME CONFIGURATION TRANSFER
*/
function f_recv_Mme_Configuration_Transfer(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_Mme_Configuration_Transfer(p_value))
} // End of f_recv_Mme_Configuration_Transfer
/**
* @desc Receive S1AP Message DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for DOWNLINK_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.19.1 DOWNLINK UE ASSOCIATED LPPA TRANSPORT
*/
function f_recv_Downlink_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_DownlinkUEAssociatedLppaTransport(p_value))
} // End of f_recv_Downlink_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.17 MME CONFIGURATION TRANSFER
*/
function f_recv_Uplink_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UplinkUEAssociatedLppaTransport(p_value))
} // End of f_recv_Uplink_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message DOWNLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for DOWNLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.19.3 DOWNLINK NON UE ASSOCIATED LPPA TRANSPORT
*/
function f_recv_Downlink_Non_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_DownlinkNonUEAssociatedLppaTransport(p_value))
} // End of f_recv_Downlink_Non_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message UPLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT
* @param p_value Receive template for UPLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.19.4 UPLINK NON UE ASSOCIATED LPPA TRANSPORT
*/
function f_recv_Uplink_Non_UE_Associated_Lppa_Transport(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UplinkNonUEAssociatedLppaTransport(p_value))
} // End of f_recv_Uplink_Non_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message HANDOVER_REQUIRED
* @param p_value Receive template for UPLINK_NON_UE_ASSOCIATED_LPPA_TRANSPORT IEs
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.5.1 HANDOVER_REQUIRED
*/
function f_recv_Handover_Required(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
// TODO
} // End of f_recv_Uplink_Non_UE_Associated_Lppa_Transport
/**
* @desc Receive S1AP Message UE Context Release Request
* @param p_value Receive template for UE CONTEXT RELEASE REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.5 UE CONTEXT RELEASE REQUEST
*/
function f_recv_UE_Context_Release_Request(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextReleaseRequest(p_value))
} // End of f_recv_UE_Context_Release_Request
/**
* @desc Receive S1AP Message UE Context Release Request
* @param p_value Receive template for UE CONTEXT RELEASE COMPLETE
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.7 UE CONTEXT RELEASE COMPLETE
*/
function f_recv_UE_Context_Release_Complete(
template (present) RecordOf_ProtocolIE p_value := ?
) runs on S1APComponent {
f_recv_S1AP_initiatingMessage(mw_UeContextReleaseComplete(p_value))
} // End of f_recv_UE_Context_Release_Complete
/**
* @desc Send functions description
*/
group sendPDU {
*/
function f_S1APPDU_Set(
inout template (value) S1AP_PDU p_PDU
) runs on S1APComponent {
if (ischosen(p_PDU.initiatingMessage)) {
//TODO...
vc_sendS1AP_PDU:=valueof(p_PDU);
}
//TODO...
vc_sendS1AP_PDU:=valueof(p_PDU);
}
//TODO...
vc_sendS1AP_PDU:=valueof(p_PDU);
}
* @desc Send S1AP PDU to protocol port
* @param p_PDU template value message to be send
*/
function f_send_S1AP_PDU(
in template (value) S1AP_PDU p_PDU
) runs on S1APComponent {
f_S1APPDU_Set(p_PDU);
S1_MMEeNB_P.send(p_PDU);
* @desc Send S1AP PDU with InitiatingMessage payload from protocol port
* @param p_initiatingMessage Send value template for InitiatingMessage message
*/
function f_send_S1AP_initiatingMessage(
in template (value) InitiatingMessage p_initiatingMessage
) runs on S1APComponent {
f_send_S1AP_PDU( {initiatingMessage := p_initiatingMessage})
* @desc Send S1AP PDU with SuccessfulOutcome payload from protocol port
* @param p_successfulOutcome Send value template for SuccessfulOutcome message
*/
function f_send_S1AP_successfulOutcome(
in template (value) SuccessfulOutcome p_successfulOutcome
f_send_S1AP_PDU( {successfulOutcome := p_successfulOutcome})
* @desc Send S1AP PDU with UnsuccessfulOutcome payload from protocol port
* @param p_unsuccessfulOutcome Send value template for UnsuccessfulOutcome message
in template (value) UnsuccessfulOutcome p_unsuccessfulOutcome
) runs on S1APComponent {
f_send_S1AP_PDU( {unsuccessfulOutcome := p_unsuccessfulOutcome})
/**
* @desc Send S1AP Message E-RAB_SetupRequest
* @param p_value Send template with IE for E-RAB_SetupRequest
*/
function f_send_E_RABSetupRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABSetupRequest(p_value))
} // End of function f_send_E_RABSetupRequest
/**
* @desc Send S1AP Message E-RAB_ModifiedRequest
* @param p_value Send template with IE for E-RAB_ModifiedRequest
*/
function f_send_E_RABModifiedRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_E_RABModifiedRequest(p_value))
} // End of function f_send_E_RABSetupRequest
/**
* @desc Send S1AP Message InitialContext_SetupRequest
* @param p_value Send template with IE for InitialContext_SetupRequest
*/
function f_send_InitialContext_SetupRequest(in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_InitialContextSetupRequest(p_value))
} // End of function f_send_InitialContext_SetupRequest
* @desc Send S1AP Message S1 SETUP RESPONSE
* @param p_value Send template with IE for S1 SETUP RESPONSE
*/
function f_send_S1_Setup_Response(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_s1_Setup_Response(p_value))
} // End of function f_send_S1_Setup_Response
/**
* @desc Send S1AP Message ENB CONFIGURATION UPDATE ACKNOWLEDGE
* @param p_value Send template with IE for ENB CONFIGURATION UPDATE ACKNOWLEDGE
*/
function f_send_eNB_Configuration_Update_Acknowledge(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_successfulOutcome(m_eNB_Configuration_Update_Acknowledge(p_value))
} // End of function f_send_eNB_Configuration_Update_Acknowledge
* @param p_value Send template with IE for RESET
*/
function f_send_Reset(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_reset(p_value))
} // End of function f_send_Reset
/**
* @desc Send S1AP Message S1 SETUP REQUEST
* @param p_value Send template with IE for S1 SETUP REQUEST
*/
function f_send_S1_Setup_Request(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_s1_Setup_Request(p_value))
} // End of function f_send_S1_Setup_Request
/**
* @desc Send S1AP Message ENB CONFIGURATION UPDATE
* @param p_value Send template with IE for ENB CONFIGURATION UPDATE
*/
function f_send_eNB_Configuration_Update(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_eNB_Configuration_Update(p_value))
} // End of function f_send_eNB_Configuration_Update
/**
* @desc Send S1AP Message MME CONFIGURATION UPDATE
* @param p_value Send template with IE for MME CONFIGURATION UPDATE
*/
function f_send_MME_Configuration_Update(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_mME_Configuration_Update(p_value))
} // End of function f_send_MME_Configuration_Update
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
/**
* @desc Send S1AP Message TRACE START
* @param p_value Send template with IE for TRACE START
*/
function f_send_Trace_Start(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_trace_Start(p_value))
} // End of function f_send_Trace_Start
/**
* @desc Send S1AP Message DEACTIVATE TRACE
* @param p_value Send template with IE for DEACTIVATE TRACE
*/
function f_send_deactivate_Trace(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_deactivate_Trace(p_value))
} // End of function f_send_deactivate_Trace
/**
* @desc Send S1AP Message LOCATION REPORTING CONTROL
* @param p_value Send template with IE for LOCATION REPORTING CONTROL
*/
function f_send_Location_Reporting_Control(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_location_Reporting_Control(p_value))
} // End of function f_send_Location_Reporting_Control
/**
* @desc Send S1AP Message LOCATION REPORT FAILURE INDICATION
* @param p_value Receive template for LOCATION REPORT FAILURE INDICATION IEs
*/
function f_send_Location_Report_Failure_Indication(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_location_Report_Failure_Indication(p_value))
} // End of f_send_Location_Report_Failure_Indication
/**
* @desc Send S1AP Message WRITE-REPLACE WARNING REQUEST
* @param p_value Send template with IE for WRITE-REPLACE WARNING REQUEST
*/
function f_send_Write_Replace_Warning_Request(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_write_Replace_Warning_Request(p_value))
} // End of function f_send_Write_Replace_Warning_Request
/**
* @desc Send S1AP Message WRITE-REPLACE WARNING RESPONSE
* @param p_value Send template with IE for WRITE-REPLACE WARNING RESPONSE
*/
function f_send_Write_Replace_Warning_Response(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_write_Replace_Warning_Response(p_value))
} // End of function f_send_Write_Replace_Warning_Response
/**
* @desc Send S1AP Message KILL REQUEST
* @param p_value Send template with IE for KILL REQUEST
*/
function f_send_Kill_Request(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_kill_Request(p_value))
} // End of function f_send_Kill_Request
/**
* @desc Send S1AP Message KILL REQUEST
* @param p_value Send template with IE for KILL REQUEST
*/
function f_send_Kill_Response(
in template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_kill_Response(p_value))
} // End of function f_send_Kill_Response
/**
* @desc Send S1AP Message UE Context Release Command
* @param p_value Send template for UE CONTEXT RELEASE REQUEST
* @see ETSI TS 136 413 V13.4.0 Clause 9.1.4.6 UE CONTEXT RELEASE COMMAND
*/
function f_send_UE_Context_Release_Command(
template (value) RecordOf_ProtocolIE p_value
) runs on S1APComponent {
f_send_S1AP_initiatingMessage(m_UeContextReleaseCommand(p_value))
} // End of f_recv_UE_Context_Release_Request
/**
* @desc Setup full procedure functions
* @see ETSI TS 136 413 V13.4.0 Clause 8.1 List of S1AP Elementary procedures
*/
group fullProcedures {
/**
* @desc Setup a full E-RAB Setup procedure
*/
function f_rABSetupRequest() runs on S1APComponent {
f_send_E_RABSetupRequest(m_E_RABSetupReqIEs(
vc_MME_UE_ID,
{
m_E_RABToBeSetupItemBearerSUReq(1),
m_E_RABToBeSetupItemBearerSUReq(
2,
m_e_RABlevelQoSParameters
(255)
)
}
));
f_recv_E_RABSetupResponse(mw_E_RABSetupResIEs_FailedToSetupList(
vc_MME_UE_ID,
{
mw_E_RABSetupItemBearerSURes(1)
},
{
mw_E_RABItem(
2,
{
radioNetwork :=not_supported_QCI_value
}
)
}
));
} // End of function f_rABSetupRequest
/**
* @desc Setup a full E-RAB Release procedure
*/
function f_rABSetupRelease() runs on S1APComponent {
// TODO
} // End of function f_rABSetupRelease
/**
* @desc Initiate an Handover procedure
*/
function f_initiate_handover() runs on S1APComponent {
// TODO
} // End of function f_initiate_handover
/**
* @desc Initiate a Trace Start procedure
*/
function f_initiate_traceStart() runs on S1APComponent {
f_send_Trace_Start(
m_trace_StartIEs(
m_traceActivation(
PX_EUTRAN_TRACE_ID,
PX_INTERFACES_TO_TRACE,
PX_TRACE_DEPTH,
PX_TRANSPORT_LAYER_ADDRESS
)));
} // End of function f_initiate_traceStart
/**
* @desc Initiate a Deactivate Trace procedure
*/
function f_initiate_deactivateTrace() runs on S1APComponent {
// TODO
} // End of function f_initiate_deactivateTrace
/**
* @desc Initiate a an Write-Replace Warning Request procedure
*/
function f_writeReplaceWarningExchanges() runs on S1APComponent {
// TODO
} // End of function f_writeReplaceWarningExchanges
} // End of group fullProcedures
group externalFunctions {
group eNBRole {
/**
* @desc Trigger an INITIAL UE MESSAGE procedure
* @return true on success, false otherwise
*/
external function fx_eNB_Initiate_NAS_transport_procedure() return boolean;
/**
* @desc Trigger an INITIAL UE MESSAGE procedure
* @return true on success, false otherwise
*/
external function fx_eNB_NAS_transport_procedure() return boolean;