- 11 Sep, 2018 1 commit
-
-
Richard Levitte authored
Since the SSL code started using RSA_NO_PADDING, the CAPI engine became unusable. This change fixes that. Fixes #7131 Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7132)
-
- 10 Sep, 2018 1 commit
-
-
Matt Caswell authored
Found by Coverity Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7169) (cherry picked from commit 512d8117)
-
- 04 Sep, 2018 5 commits
-
-
Richard Levitte authored
With the introduction of -pkeyopt, the number of bits may change without |newkey| being updated. Unfortunately, there is no API to retrieve the information from a EVP_PKEY_CTX either, so chances are that we report incorrect information. For the moment, it's better not to try to report the number of bits at all. Fixes #7086 Reviewed-by:
Paul Yang <yang.yang@baishancloud.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7096) (cherry picked from commit 17147181)
-
Richard Levitte authored
Reviewed-by:
-
Matt Caswell authored
They did not make it clear how the memory management works for the |pctx| parameter. Reviewed-by:
-
Jakub Wilk authored
The default input format is PEM, so explicit "-inform DER" is needed to read DER-encoded CRL. CLA: trivial Reviewed-by:
-
Matt Caswell authored
Just remove that statement. It's not been true since 2005. Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/6906)
-
- 03 Sep, 2018 1 commit
-
-
Pauli authored
Reviewed-by:
-
- 02 Sep, 2018 1 commit
-
-
Eric Brown authored
This trivial patch removes a duplicated call to ASN1_INTEGER_set. Fixes Issue #6977 Signed-off-by:
Eric Brown <browne@vmware.com> Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
-
- 28 Aug, 2018 4 commits
-
-
Andy Polyakov authored
(cherry picked from commit 324b9560 ) Reviewed-by:
-
Andy Polyakov authored
(cherry picked from commit e02c519c ) Resolved conflicts: crypto/bn/bn_blind.c Reviewed-by:
-
Andy Polyakov authored
In [most common] case of p and q being of same width, it's possible to replace CRT modulo operations with Montgomery reductions. And those are even fixed-length Montgomery reductions... (cherry picked from commit 41bfd5e7 ) Resolved conflicts: crypto/rsa/rsa_eay.c Reviewed-by:
-
Andy Polyakov authored
Add bn_mul_fixed_top, bn_from_mont_fixed_top, bn_mod_sub_fixed_top. Switch to bn_{mul|sqr}_fixed_top in bn_mul_mont_fixed_top and remove memset in bn_from_montgomery_word. (cherry picked from commit fcc4ee09 ) Resolved conflicts: crypto/bn/bn_mod.c crypto/bn_int.h Reviewed-by:
-
- 27 Aug, 2018 1 commit
-
-
Hubert Kario authored
the option is provided in the -help message of the s_server utility but it is not documented in the man page, this fixes it Reviewed-by:
-
- 17 Aug, 2018 1 commit
-
-
Andy Polyakov authored
Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6916) (cherry picked from commit 0da7358b) Resolved conflicts: crypto/x509v3/v3_purp.c
-
- 14 Aug, 2018 7 commits
-
-
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Richard Levitte authored
Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6957)
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Richard Levitte authored
Just as was done recently for i2d_ASN1_OBJECT, we also make i2d_ASN1_BOOLEAN comply with the documentation. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6943)
-
- 11 Aug, 2018 1 commit
-
-
Richard Levitte authored
Since 0.9.7, all i2d_ functions were documented to allocate an output buffer if the user didn't provide one, under these conditions (from the 1.0.2 documentation): For OpenSSL 0.9.7 and later if B<*out> is B<NULL> memory will be allocated for a buffer and the encoded data written to it. In this case B<*out> is not incremented and it points to the start of the data just written. i2d_ASN1_OBJECT was found not to do this, and would crash if a NULL output buffer was provided. Fixes #6914 Reviewed-by:Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/6918) (cherry picked from commit 61140415)
-
- 10 Aug, 2018 3 commits
-
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
It was false positive, but one can as well view it as readability issue. Switch even to unsigned indices because % BN_BYTES takes 4-6 instructions with signed dividend vs. 1 (one) with unsigned. Reviewed-by:
-
Andy Polyakov authored
"Computationally constant-time" means that it might still leak information about input's length, but only in cases when input is missing complete BN_ULONG limbs. But even then leak is possible only if attacker can observe memory access pattern with limb granularity. Reviewed-by:
-
- 07 Aug, 2018 1 commit
-
-
Richard Levitte authored
Reviewed-by:
-
- 01 Aug, 2018 9 commits
-
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
(back-ported from commit 37132c97 ) Reviewed-by:
-
Billy Brumley authored
Those even order that do not play nicely with Montgomery arithmetic (back-ported from commit 3a6a4a93 ) Reviewed-by:
-
Andy Polyakov authored
New implementation failed to correctly reset r->neg flag. Spotted by OSSFuzz. Reviewed-by:
-
Andy Polyakov authored
Originally suggested solution for "Return Of the Hidden Number Problem" is arguably too expensive. While it has marginal impact on slower curves, none to ~6%, optimized implementations suffer real penalties. Most notably sign with P-256 went more than 2 times[!] slower. Instead, just implement constant-time BN_mod_add_quick. Reviewed-by:
-
Andy Polyakov authored
Note that exported functions maintain original behaviour, so that external callers won't observe difference. While internally we can now perform Montogomery multiplication on fixed-length vectors, fixed at modulus size. The new functions, bn_to_mont_fixed_top and bn_mul_mont_fixed_top, are declared in bn_int.h, because one can use them even outside bn, e.g. in RSA, DSA, ECDSA... Reviewed-by:
-
Andy Polyakov authored
The new flag marks vectors that were not treated with bn_correct_top, in other words such vectors are permitted to be zero padded. For now it's BN_DEBUG-only flag, as initial use case for zero-padded vectors would be controlled Montgomery multiplication/exponentiation, not general purpose. For general purpose use another type might be more appropriate. Advantage of this suggestion is that it's possible to back-port it... bn/bn_div.c: fix memory sanitizer problem. bn/bn_sqr.c: harmonize with BN_mul. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Trouble is that addition is postponing expansion till carry is calculated, and if addition carries, top word can be zero, which triggers assertion in bn_check_top. Reviewed-by:
-
- 26 Jul, 2018 3 commits
-
-
Kurt Roeckx authored
Reviewed-by:
-
Kurt Roeckx authored
The old numbers where all generated for an 80 bit security level. But the number should depend on security level you want to reach. For bigger primes we want a higher security level and so need to do more tests. Reviewed-by:
-
Kurt Roeckx authored
This changes the security level from 100 to 128 bit. We only have 1 define, this sets it to the highest level supported for DSA, and needed for keys larger than 3072 bit. Reviewed-by:
-
- 25 Jul, 2018 1 commit
-
-
Rich Salz authored
Thanks to Jiecheng Wu, Zuxing Gu for the report. Reviewed-by:
-
