- 19 Feb, 2016 7 commits
-
-
Richard Levitte authored
This is done with a simple file name comparison. We could think of something more elegant in the future. Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
Some directories weren't removed. Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
Adding uplink and applink to some builds was done by "magic", the configuration for "mingw" only had a macro definition, the Configure would react to its presence by adding the uplink source files to cpuid_asm_src, and crypto/build.info inherited dance to get it compiled, and Makefile.shared made sure applink.o would be appropriately linked in. That was a lot under the hood. To replace this, we create a few template configurations in Configurations/00-base-templates.conf, inherit one of them in the "mingw" configuration, the rest is just about refering to the $target{apps_aux_src} / $target{apps_obj} in the right places. Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
VMS DIFF tries to calculate all the differences, which is slower than just reading the files and stopping at the first difference. The latter doesn't exist as a command, so the problem is solved with perl and File::Compare (has been in core perl since very early version 5). Reviewed-by:
Viktor Dukhovni <viktor@openssl.org>
-
Richard Levitte authored
We need to do the same dance as when object files are created. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org>
-
Richard Levitte authored
DCL may be in extended parsing style, which makes it less case insensitive, so when removing a string from another, make sure to get casing correctly. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org>
-
Richard Levitte authored
The benefit with using configdata.pm is that Configure writes it for us. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org>
-
- 18 Feb, 2016 18 commits
-
-
Richard Levitte authored
This isn't the fully featured combination of compiler generated dependency files and Makefile include directives, but a cheaper variant of the same. The dependency files are generated automatically, but then we have the usual "depend" target. However, we depend on it in the bigger phony targets that are the most likely to be used. That make this feature automatic enough. A side effect is that we can't use the build file's timestamp to check if reconfiguring might be in order. In its place, we use a flag file that depends on Configure and the build file template and depend on it in spots where it makes sense to check for the need to reconfigure. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
The uninstall_sw target tried to 'make uninstall' in all subdirs. Change it to only go into $(INSTALL_SUBS), just like install_sw does. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
When cross compiling, we may end up with someting like apps/openssl.exe and a number of test/*.exe. However, util/shlib_wrap.sh doesn't know what the executable extension should be, if any, so we need to make sure it has access to that information when testing, since OpenSSL::Test uses that script to execute all programs. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
All those flags existed because we had all the dependencies versioned in the repository, and wanted to have it be consistent, no matter what the local configuration was. Now that the dependencies are gone from the versioned Makefile.ins, it makes much more sense to use the exact same flags as when compiling the object files. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
.d (.MMS in the VMS world) files with just dependencies are built from exactly the same conditions as the object files. Therefore, the rules for them can be built at the same time as the rules for the corresponding object files. This removes the requirement for a src2dep function in the build file templates, and for common.tmpl to call it. In the end, the existence of depend files is entirely up to the build file. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Rich Salz authored
Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
Roumen Petrov authored
Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
Rich Salz authored
Add -DBIO_DEBUG to --strict-warnings. Remove comments about outdated debugging ifdef guards. Remove md_rand ifdef guarding an assert; it doesn't seem used. Remove the conf guards in conf_api since we use OPENSSL_assert, not assert. For pkcs12 stuff put OPENSSL_ in front of the macro name. Merge TLS_DEBUG into SSL_DEBUG. Various things just turned on/off asserts, mainly for checking non-NULL arguments, which is now removed: camellia, bn_ctx, crypto/modes. Remove some old debug code, that basically just printed things to stderr: DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG, RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG. Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL. Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
Roumen Petrov authored
Reviewed-by:
Viktor Dukhovni <viktor@openssl.org>
-
Neel Goyal authored
Change `SSL_get_msg_callback_arg` to `SSL_set_msg_callback_arg` Signed-off-by:
Rich Salz <rsalz@akamai.com> Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Rich Salz authored
enc: - typo in -base64 option - missing help opt text ocsp, req, rsautl, s_client: - missing help opt text Signed-off-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Matt Caswell authored
The windows thread stop code was erroneously not just deleting the thread local variable on thread stop, but also deleting the thread local *key* (thus removing thread local data for *all* threads in one go!). Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Roumen Petrov authored
Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
Certain code paths in tls_decrypt_ticket could return early without first freeing the HMAC_CTX or the EVP_CIPHER_CTX. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Zhao Junwang authored
As handshake_func is a function pointer, it should compare to NULL Signed-off-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Matt Caswell <matt@openssl.org>
-
Dr. Stephen Henson authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Rich Salz authored
Thanks to Viktor for additional review. Reviewed-by:
Richard Levitte <levitte@openssl.org>
-
- 17 Feb, 2016 15 commits
-
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
The reason is that we use hstrerror() and other resolver functions. Reporter: Erik Forsberg <erik@efca.com> Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
David Woodhouse authored
Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Richard Levitte authored
"or" has lower priority than "||" and works better to have Perl less confused. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
It's near impossible to figure out what goes wrong with the execution of sub-commands otherwise. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
David Woodhouse authored
Although I explicitly don't care about the tinfoil-hat reason given in the initial opening of RT#3628, that "paths usually contain private information", there *are* situations where it's useful to eliminate the filenames from the compiled binary. The two reasons we do care about in the context of firmware such as EDK2 are that it allows for a smaller footprint, and it is also a necessary component of a binary-reproducible build. To that end, introduce OPENSSL_FILE and OPENSSL_LINE macros, defining them to __FILE__ and __LINE__ respectively in the normal case, but to "" and 0 when OPENSSL_NO_FILENAMES is set. This is mostly a naïve invocation of $ sed 's/__\([FL]I[NL]E\)__/OPENSSL_\1/g' -i `git grep -l __LINE__` but with a few instances change to just print the function name instead (although those probably need to die anyway) and test cases left untouched. Signed-off-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Richard Levitte authored
For example, this works instead of giving a big error message (note the lack of '--unified'): mkdir ../_build (cd ../_build/; ../openssl-src/config; make) Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Richard Levitte authored
The previous fix wasn't right. Also, change all (^|\s) and (\s|$) constructs to (?:^|\s) and (?:\s|$). Perl seems to like that better. Reviewed-by:
Andy Polyakov <appro@openssl.org>
-
Rich Salz authored
When OPENSSL_NO_ASYNC is set, make ASYNC_{un,}block_pause() do nothing. This prevents md_rand.c from failing to build. Probably better to do it this way than to wrap every instance in an explicit #ifdef. A bunch of new socket code got added to a new file crypto/bio/b_addr.c. Make it all go away if OPENSSL_NO_SOCK is defined. Allow configuration with no-ripemd, no-ts, no-ui We use these for the UEFI build. Also remove the 'Really???' comment from no-err and no-locking. We use those too. We need to drop the crypto/engine directory from the build too, and also set OPENSSL_NO_ENGINE Signed-off-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Tim Hudson <tjh@openssl.org>
-
Dr. Stephen Henson authored
Reviewed-by:
Matt Caswell <matt@openssl.org>
-
David Woodhouse authored
Commit e634b448 ("Defines OSSL_SSIZE_MAX") introduced a definition of OSSL_SSIZE_MAX which broke the UEFI build. Fix that by making UEFI take the same definition as Ultrix (ssize_t == int). Signed-off-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Matt Caswell <matt@openssl.org>
-
David Woodhouse authored
We don't have atexit() in the EDK2 environment. Firmware never exits. Signed-off-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Matt Caswell <matt@openssl.org>
-
Rich Salz authored
Reviewed-by:
Viktor Dukhovni <viktor@openssl.org>
-