Reviewed-by: Rich Salz <rsalz@openssl.org>

$openssldir and $enginesdir were mistakenly made unavailable to other
perl fragments.  They are still needed in the definition of CFLAGS.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This logical names permits '#include <openssl/foo.h>' to work properly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1.  We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.

For VMS, the change is a bit more involved, primarly because the top
installation directory was already versioned, *as well as* some of the
files inside.  That's a bit too much.  Version numbering in files is
also a bit different on VMS.  The engines for shared library version
1.1 will therefore end up in OSSL$INSTROOT:[ENGINES0101.'arch']

('arch' is the architecture we build for)

Reviewed-by: Rich Salz <rsalz@openssl.org>

OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1.  We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.

For Unix, the default installation directory is changed from
$PREFIX/lib/engines to $PREFIX/lib/engines-${major}_${minor} (mingw)
or $PREFIX/lib/engines-${major}.${minor} (all but mingw)

($PREFIX is the directory given for the configuration option --prefix,
and ${major} and ${minor} are the major and minor shared library
version numbers)

Reviewed-by: Rich Salz <rsalz@openssl.org>

OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1.  We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.

For windows, the default installation directory is changed from
$PREFIX/lib/engines to $PREFIX/lib/engines-${major}_${minor}

($PREFIX is the directory given for the configuration option --prefix,
and ${major} and ${minor} are the major and minor shared library
version numbers)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

When creating the library $lib.olb, make sure the extension is there.
Otherwise, a logical name with the same name as the file in question
will redirect the creation elsewhere.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The calls we made to it were redundant, as the same initialization is
done later in OPENSSL_init_crypto() anyway.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Separate invalid input case from any internal (malloc) failure

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Make it possible to have a separate and different perl command string
for installable scripts than we use when building, with the
environment variable HASHBANGPERL.  Its value default to the same as
the environment PERL if it's defined, otherwise '/usr/bin/env perl'.

Note: this is only relevant for Unix-like environments.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

The SSL_load_client_CA_file() failed to load any CAs due to an
inccorrect assumption about the return value of lh_*_insert(). The
return value when inserting into a hash is the old value of the key.

The bug was introduced in 3c82e437

.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1279)

On VMS, it's customary to have a procedure to check that the software
was installed correctly and can run as advertised.

The procedure added here is fairly simple, it checks that all
libraries are in place, that the header crypto.h is in place, and that
the command 'openssl version -a' runs without trouble.

Reviewed-by: Rich Salz <rsalz@openssl.org>

- The install top is versioned by default.  However, only the major
  version should be used.
- the default areas for certs, private keys an config files have
  changed, now all prefixed with 'OSSL$'.  This gets reflected in
  cryptlib.h.
- [.VMS]openssl_startup.com.in had some faults regarding creating
  rooted concealed logical names.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This makes it possible for script writers to lock on to a specific
version if they need to.  Note that only the major version number is
used.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Also, have the static library file names contain the pointer size when
applicable.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Also, make sure that per-file deps are included in the build, even if previous
builds have failed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't use hardcoded SSL_METHODs!

Reviewed-by: Richard Levitte <levitte@openssl.org>

We calculate the size required for the ServerKeyExchange message and then
call BUF_MEM_grow_clean() on the buffer. However we fail to take account of
2 bytes required for the signature algorithm and 2 bytes for the signature
length, i.e. we could overflow by 4 bytes. In reality this won't happen
because the buffer is pre-allocated to a large size that means it should be
big enough anyway.

Addresses an OCAP Audit issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The recent merge of https://github.com/openssl/openssl/pull/1264


removed some trailing whitespace from the generated file obj_dat.h.
Unfortunately obj_dat.pl kept re-adding it.  Clean up the
script and the output it generates.

Add 'use strict / use warnings'

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Now that INCLUDE considers both the source and build trees, no need
for the rel2abs perl fragment hacks any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>

INCLUDE statements in build.info files were source tree centric.  That
meant that to get include directory specs in the build tree, we had to
resort to perl fragments that specified the build tree include paths
as absolute ones.

This change has the INCLUDE statement consider both the source and
build tree for any include directory.  It means that there may be some
extra unnecessary include paths, but it also makes life simpler for
anyone who makes changes in the build.info files.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

GH: #1276

Fixes #1260

Reviewed-by: Matt Caswell <matt@openssl.org>

GH: #1266

malloc(0) might return NULL and code for the old callbacks might fail,
instead just say they should allocate 1 entry.

Reviewed-by: Matt Caswell <matt@openssl.org>

GH: #1266

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1223)

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1223)