- Sep 16, 2018
-
-
Pauli authored
coexist. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7233)
-
Pauli authored
The latter causes problems when complex.h is #included. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7233)
-
Matt Eaton authored
Fixed a minor typo while reading the documentation. I agree that this contribution is trivial can be freely used. CLA: trivial Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by: Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/7221)
-
Kurt Roeckx authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> GH: #7188
-
- Sep 15, 2018
-
-
Richard Levitte authored
It simply isn't available on older versions. Issue submitted by Mark Daniels Fixes #7229 Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7230) (cherry picked from commit d6d6aa35)
-
- Sep 14, 2018
-
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7208)
-
Richard Levitte authored
With the change to have separate object files by intent, VMS name mangling gets done differently. While we previously had that for libraries only, we must now turn that on generally for our programs, because some of them depend in internal libraries where mangled names are all that there is. Dynamic modules are still built with non-mangled names, which is good enough to show that it's possible to build with our public libraries using our public headers. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7208)
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7208)
-
- Sep 13, 2018
-
-
Paul Yang authored
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/7209)
-
Matt Caswell authored
-early_data is not compatible with -www, -WWW, -HTTP or -rev. Fixes #7200 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7206)
-
Matt Caswell authored
Caused a compilation failure in some environments Fixes #7204 Reviewed-by: Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7205)
-
- Sep 12, 2018
-
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7198)
-
Richard Levitte authored
The possibility to do this was killed when we started producing object file names with encoded intention (and possibly different builds), and leads to build errors. With that, 'libobj2shlib' is renamed to 'obj2shlib' to reflect this design change. The old name is still used if the new one isn't available, for the sake of backward compatibility. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7198)
-
Dr. Matthias St. Pierre authored
The new DRBG API added the aforementioned #define. However, it is used internally only and having it defined publicly does not serve any purpose except causing potential version compatibility problems. Fixes #7182 Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7190)
-
Bernd Edlinger authored
Fixes: #7161 (hopefully) Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7175)
-
Brian 'geeknik' Carpenter authored
Fixes a minor typo that would cause the linker to complain about not finding -lFuzzer CLA: trivial Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7197)
-
Viktor Szakats authored
- fix to use secure URL in generated Windows resources - fix a potentially uninitialized variable - fix an unused variable warning CLA: trivial Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7189)
-
Richard Levitte authored
Fixes #7186 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7193)
-
- Sep 11, 2018
-
-
Richard Levitte authored
This is in preparation for having separate CFLAGS variables for static and for shared library builds. Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7159)
-
Richard Levitte authored
This will allow to have different object files for different products, even if they share the same source code, and possibly different builds for those different object files. For example, one can have something like this: SOURCES[libfoo]=cookie.c INCLUDES[libfoo]=include/foo SOURCES[libbar]=cookie.c INCLUDES[libbar]=include/bar This would mean that the object files and libraries would be build somewhat like this: $(CC) -Iinclude/foo -o libfoo-lib-cookie.o cookie.c $(AR) $(ARFLAGS) libfoo.a libfoo-lib-cookie.o $(CC) -Iinclude/bar -o libbar-lib-cookie.o cookie.c $(AR) $(ARFLAGS) libbar.a libbar-lib-cookie.o Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7159)
-
Richard Levitte authored
Instead, use the include settings from the products later in the process, making it possible to have different includes for two different libraries that share the same source code. Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7159)
-
Pauli authored
limit is ever reached. This is a FIPS 140-2 requirement from IG A.5 "Key/IV Pair Uniqueness Requirements from SP 800-38D". Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7129)
-
Pauli authored
Add support for HMAC over any evp supported digest. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6945)
-
Pauli authored
keys. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7120)
-
Pauli authored
Add a check that the two keys used for AES-XTS are different. One test case uses the same key for both of the AES-XTS keys. This causes a failure under FIP 140-2 IG A.9. Mark the test as returning a failure. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7120)
-
Richard Levitte authored
The OMC hasn't yet decided what the next release version will be, but it's at least going to 1.1.2, so we set that value for the moment. Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7180)
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7176)
-
Richard Levitte authored
Since the SSL code started using RSA_NO_PADDING, the CAPI engine became unusable. This change fixes that. Fixes #7131 Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7174)
-
- Sep 10, 2018
-
-
Matt Caswell authored
Found by Coverity Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7169)
-
Matt Caswell authored
Fixes a Coverity complaint. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7170)
-
Matt Caswell authored
If sizeof(int) != sizeof(size_t) this may not work correctly. Fixes a Coverity issue. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7168)
-
Matt Caswell authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7167)
-
Matt Caswell authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7164)
-
Matt Caswell authored
Hopefully this will resolve spurious travis failures. [extended tests] Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7163)
-
Paul Yang authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7160)
-
Dr. Matthias St. Pierre authored
It's actually not a real issue but caused by the absence of the default case which does not occur in reality but which makes coverity see a code path where pkey remains unassigned. Reported by Coverity Scan (CID 1423323) [extended tests] Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7158)
-
Dr. Matthias St. Pierre authored
Reported by Coverity Scan (CID 1439138) [extended tests] Reviewed-by: Ben Kaduk <kaduk@mit.edu> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7156)
-
Dr. Matthias St. Pierre authored
Reported by Coverity Scan (CID 1439136) [extended tests] Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7155)
-