- Oct 18, 2018
-
-
Viktor Dukhovni authored
Also, some readers of the code find starting the count at 1 for EE cert confusing (since RFC5280 counts only non-self-issued intermediate CAs, but we also counted the leaf). Therefore, never count the EE cert, and adjust the path length comparison accordinly. This may be more clear to the reader. Reviewed-by:
Matt Caswell <matt@openssl.org> (cherry picked from commit dc5831da)
-
Viktor Dukhovni authored
At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph of above https://tools.ietf.org/html/rfc5280#section-3.3), we see: This specification covers two classes of certificates: CA certificates and end entity certificates. CA certificates may be further divided into three classes: cross-certificates, self-issued certificates, and self-signed certificates. Cross-certificates are CA certificates in which the issuer and subject are different entities. Cross-certificates describe a trust relationship between the two CAs. Self-issued certificates are CA certificates in which the issuer and subject are the same entity. Self-issued certificates are generated to support changes in policy or operations. Self- signed certificates are self-issued certificates where the digital signature may be verified by the public key bound into the certificate. Self-signed certificates are used to convey a public key for use to begin certification paths. End entity certificates are issued to subjects that are not authorized to issue certificates. that the term "self-issued" is only applicable to CAs, not end-entity certificates. In https://tools.ietf.org/html/rfc5280#section-4.2.1.9 the description of path length constraints says: The pathLenConstraint field is meaningful only if the cA boolean is asserted and the key usage extension, if present, asserts the keyCertSign bit (Section 4.2.1.3). In this case, it gives the maximum number of non-self-issued intermediate certificates that may follow this certificate in a valid certification path. (Note: The last certificate in the certification path is not an intermediate certificate, and is not included in this limit. Usually, the last certificate is an end entity certificate, but it can be a CA certificate.) This makes it clear that exclusion of self-issued certificates from the path length count applies only to some *intermediate* CA certificates. A leaf certificate whether it has identical issuer and subject or whether it is a CA or not is never part of the intermediate certificate count. The handling of all leaf certificates must be the same, in the case of our code to post-increment the path count by 1, so that we ultimately reach a non-self-issued intermediate it will be the first one (not zeroth) in the chain of intermediates. Reviewed-by:
-
- Oct 17, 2018
-
-
Andy Polyakov authored
(back-port of commit 7d0effea ) Reviewed-by:
-
- Oct 15, 2018
-
-
Benjamin Kaduk authored
Historically (i.e., OpenSSL 1.0.x), the openssl applications would allow for empty subject attributes to be passed via the -subj argument, e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`. Commit db4c08f0 applied a badly needed rewrite to the parse_name() helper function that parses these strings, but in the process dropped a check that would skip attributes with no associated value. As a result, such strings are now treated as hard errors and the operation fails. Restore the check to skip empty attribute values and restore the historical behavior. Document the behavior for empty subject attribute values in the corresponding applications' manual pages. (cherry picked from commit 3d362f19) (cherry picked from commit a7ee1ef6 ) Reviewed-by:
-
- Oct 13, 2018
-
-
Tomas Mraz authored
Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by:
-
- Oct 12, 2018
-
-
Andy Polyakov authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
-
- Oct 04, 2018
-
-
Richard Levitte authored
Only a few clashing ones remain Reviewed-by:
Paul Yang <yang.yang@baishancloud.com> (Merged from https://github.com/openssl/openssl/pull/7331) (cherry picked from commit b44882a0)
-
Richard Levitte authored
BIO_s_log() is declared for everyone, so should return NULL when not actually implemented. Also, it had explicit platform limitations in util/mkdef.pl that didn't correspond to what was actually in code. While at it, a few other hard coded things that have lost their relevance were removed. include/openssl/ocsp.h had a few duplicate declarations. Reviewed-by:
-
- Oct 02, 2018
-
-
Sohaib ul Hassan authored
This commit implements coordinate blinding, i.e., it randomizes the representative of an elliptic curve point in its equivalence class, for prime curves implemented through EC_GFp_simple_method, EC_GFp_mont_method, and EC_GFp_nist_method. This commit is derived from the patch https://marc.info/?l=openssl-dev&m=131194808413635 by Billy Brumley. Coordinate blinding is a generally useful side-channel countermeasure and is (mostly) free. The function itself takes a few field multiplicationss, but is usually only necessary at the beginning of a scalar multiplication (as implemented in the patch). When used this way, it makes the values that variables take (i.e., field elements in an algorithm state) unpredictable. For instance, this mitigates chosen EC point side-channel attacks for settings such as ECDH and EC private key decryption, for the aforementioned curves. For EC_METHODs using different coordinate representations this commit does nothing, but the corresponding coordinate blinding function can be easily added in the future to extend these changes to such curves. Co-authored-by:
Billy Brumley <bbrumley@gmail.com> Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6526)
-
- Sep 29, 2018
-
-
Billy Brumley authored
This is a backport of #7028 to 1.1.0. It squashes the two original commits and applies changes for compatibility with 1.1.0. 1. cherry picked from commit 30c41bfb [test] ECC: make sure negative tests pass for the right reasons 2. cherry picked from commit bfb10b97 [test] throw error from wrapper function instead of an EC_METHOD specific one Given that in 1.1.0 `EC_POINT_get_affine_coordinates_GFp` and `EC_POINT_get_affine_coordinates_GF2m` have not been unified, in this backport the tests distinguish between the 2 different functions as the cause of the expected error. [extended tests] to trigger sanitizer checks and coverage analysis. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7152)
-
Billy Brumley authored
This is a backport of #6608 to 1.1.0. 1. For every named curve, two "golden" keypair positive tests. 2. Also two "golden" stock ECDH positive tests. 3. For named curves with non-trivial cofactors, additionally two "golden" ECC CDH positive tests. 4. For named curves with non-trivial cofactors, additionally two negative tests. There is some overlap with existing EVP tests, especially for the NIST curves (for example, positive testing ECC CDH KATs for NIST curves). "Golden" here means all the values are independent from OpenSSL's ECC code. I used sage to calculate them. What comes from OpenSSL is: 1. The OIDs (parsed by tooling) 2. The curve parameters (parsing ecparam output with tooling) The values inside the PEMs (private keys, public keys) and shared keys are from sage. The PEMs themselves are the output of asn1parse, with input taken from sage. (cherry picked from commit 249330de ) Reviewed-by:
-
Nicola Tuveri authored
This is a manual backport of #3472 to 1.1.0. This is a partial backport, limited only to evptests, as #3472 also affected bntests, which has a completely different form in 1.1.0. Reviewed-by:
-
Nicola Tuveri authored
This is a manual port of #3443 (and the related bugfix PR #3452) to 1.1.0. Reviewed-by:
-
- Sep 24, 2018
-
-
Daniel Bevenius authored
This commit documents the OPENSSL_VERSION_TEXT which is currently missing in the man page. Reviewed-by:
-
Pauli authored
Change all calls to getenv() inside libcrypto to use a new wrapper function that use secure_getenv() if available and an issetugid then getenv if not. CPU processor override flags are unchanged. Extra checks for OPENSSL_issetugid() have been removed in favour of the safe getenv. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/7047) (cherry picked from commit 5c39a55d)
-
- Sep 21, 2018
-
-
Richard Levitte authored
This module includes bn.h via other headers, so it picks up the definition from there and doesn't need to define them locally (any more?). Worst case scenario, the redefinition may be different and cause all sorts of compile errors. Fixes #7227 Reviewed-by:
-
- Sep 20, 2018
-
-
Richard Levitte authored
These both indicate that the file descriptor we're trying to use as a terminal isn't, in fact, a terminal. Fixes #7271 Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7272) (cherry picked from commit 276bf862)
-
- Sep 16, 2018
-
-
Pauli authored
The latter causes problems when complex.h is #included. Reviewed-by:
-
Pauli authored
coexist. Reviewed-by:
-
- Sep 13, 2018
-
-
Matt Caswell authored
Caused a compilation failure in some environments Fixes #7204 Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7205) (cherry picked from commit bc278f30)
-
- Sep 12, 2018
-
-
Viktor Szakats authored
- fix to use secure URL in generated Windows resources - fix a potentially uninitialized variable CLA: trivial Reviewed-by:
-
- Sep 11, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
-
parasssh authored
CLA: trivial (cherry picked from commit fa332bba ) Reviewed-by:
-
Richard Levitte authored
Since the SSL code started using RSA_NO_PADDING, the CAPI engine became unusable. This change fixes that. Fixes #7131 Reviewed-by:
-
- Sep 10, 2018
-
-
Matt Caswell authored
Found by Coverity Reviewed-by:
-
- Sep 06, 2018
-
-
Shane Lontis authored
Reviewed-by:
-
- Sep 05, 2018
-
-
Nicola Tuveri authored
Reviewed-by:
-
Nicola Tuveri authored
`RSA_free()` and friends are called in case of error from `RSA_new_method(ENGINE *e)` (or the respective equivalent functions). For the rest of the description I'll talk about `RSA_*`, but the same applies for the equivalent `DSA_free()`, `DH_free()`, `EC_KEY_free()`. If `RSA_new_method()` fails because the engine does not implement the required method, when `RSA_free(RSA *r)` is called, `r->meth == NULL` and a segfault happens while checking if `r->meth->finish` is defined. This commit fixes this issue by ensuring that `r->meth` is not NULL before dereferencing it to check for `r->meth->finish`. Fixes #7102 . Reviewed-by:
-
- Sep 04, 2018
-
-
Pauli authored
Manual backport from master. Reviewed-by:
-
Eric Curtin authored
-subj 'subject=C = US, ST = A, L = root, O = Hewlett Packard Enterprise Company, OU = Remote Device Access, CN = Hewlett Packard Enterprise Remote Device Access Test Local CA, emailAddress = rda@hpe.com' was a valid subject in openssl 1.0. Error received in 1.1 is: problems making Certificate Request Not very informative, I only figured this out because I compiled the code and added logging. Reviewed-by:
-
Pauli authored
Reviewed-by:
-
Shane Lontis authored
Reviewed-by:
-
Shane Lontis authored
Reviewed-by:
-
Shane Lontis authored
Reviewed-by:
-
Richard Levitte authored
With the introduction of -pkeyopt, the number of bits may change without |newkey| being updated. Unfortunately, there is no API to retrieve the information from a EVP_PKEY_CTX either, so chances are that we report incorrect information. For the moment, it's better not to try to report the number of bits at all. Fixes #7086 Reviewed-by:
-
Matt Caswell authored
They did not make it clear how the memory management works for the |pctx| parameter. Fixes #7037 Reviewed-by:
-
Jakub Wilk authored
The default input format is PEM, so explicit "-inform DER" is needed to read DER-encoded CRL. CLA: trivial Reviewed-by:
-
Matt Caswell authored
Just remove that statement. It's not been true since 2005. Reviewed-by:
-
- Sep 03, 2018
-
-
Paul Kehrer authored
Reviewed-by:
-
Paul Kehrer authored
fixes #7081 Reviewed-by:
-
