RC4 based ciphersuites in libssl have been disabled by default. They can
be added back by building OpenSSL with the "enable-weak-ssl-ciphers"
Configure option at compile time.

Reviewed-by: Rich Salz <rsalz@openssl.org>

1) Simplify code with better PACKET methods.

2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.

3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.

4) Send an alert on ALPN protocol mismatch.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

The ubsec engine is now considered obsolete and therefore has been
removed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.

Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.

Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.

In Apache, the seed directive is known as SSLSRPUnknownUserSeed.

To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.

Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

We were kinda sorta using a mix of $disabled{"static-engine" and
$disabled{"dynamic-engine"} in Configure.  Let's avoid confusion,
choose one of them and stick to it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.

The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).

Reviewed-by: Rich Salz <rsalz@openssl.org>

To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.

This addresses RT 3647

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add utility macros REF_ASSERT_NOT and REF_PRINT_COUNT
This is also RT 4181

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

The DTLSv1_listen function exposed details of the underlying BIO
abstraction and did not properly allow for IPv6. This commit changes the
"peer" argument to be a BIO_ADDR and makes it a first class function
(rather than a ctrl) to ensure proper type checking.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Accept leading 0-byte in PKCS1 type 1 padding. Internally, the byte is
stripped by BN_bn2bin but external callers may have other expectations.

Reviewed-by: Kurt <Roeckx&lt;kurt@openssl.org>

CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:

SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.

SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).

The command-line switch has changed from -no_comp to -comp.

Reviewed-by: Rich Salz <rsalz@openssl.org>

PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.

Reviewed-by: Rich Salz <rsalz@openssl.org>

There was an unused macro in ssl_locl.h that used an internal
type, so I removed it.
Move bio_st from bio.h to ossl_type.h

Reviewed-by: Andy Polyakov <appro@openssl.org>

The use of the uninitialized buffer in the RNG has no real security
benefits and is only a nuisance when using memory sanitizers.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add details about the latest issues fixed in the forthcoming release.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed.  This simplifies the source code and
does not really penalize anyone.
        DES_PTR (always on)
        DES_RISC1, DES_RISC2 (always off)
        DES_INT (always 'unsigned int')
        DES_UNROLL (always on)
        BF_PTR (always on) BF_PTR2 (removed)
        MD2_CHAR, MD2_LONG (always 'unsigned char')
        IDEA_SHORT, IDEA_LONG (always 'unsigned int')
        RC2_SHORT, RC2_LONG (always 'unsigned int')
        RC4_LONG (only int and char (for assembler) are supported)
        RC4_CHUNK (always long), RC_CHUNK_LL (removed)
        RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)

This is done in consultation with Andy.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.

This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.

Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.

See:
https://wiki.openssl.org/index.php/Binaries



Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix the docs, and refactor some common code.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Provide backwards-compatiblity for functions, macros and include
files if OPENSSL_API_COMPAT is either not defined or defined less
than the version number of the release in which the feature was
deprecated.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
        (Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.

Reviewed-by: Richard Levitte <levitte@openssl.org>