* Perform ALPN after the SNI callback; the SSL_CTX may change due to
  that processing
* Add flags to indicate that we actually sent ALPN, to properly error
  out if unexpectedly received.
* document ALPN functions
* unit tests

Backport of commit 817cd0d5



Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

no-comp on Windows was not actually suppressing compilation of the code,
although it was suppressing its use.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure we check for a NULL return from OPENSSL_malloc

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>

If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>

There is a potential double free in EVP_DigestInit_ex. This is believed
to be reached only as a result of programmer error - but we should fix it
anyway.

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit ffe9150b)

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

MR: #2341

If there is cause to think LD_LIBRARY_PATH_32 and LD_PRELOAD_32 are
appropriate variables to touch, do so.  Otherwise, touch the usual
LD_LIBRARY_PATH and LD_PRELOAD.  This covers for older installations
that don't have a mix of 32-bit and 64-bit libs.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit a772e9d0)

Submitted by Erik Forsberg <erik@efca.com>

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 86e75432)

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

This improves ABI compatibility when symbol resolution is not lazy.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some OSes, *cough*-dows, insist on stack being "wired" to
physical memory in strictly sequential manner, i.e. if stack
allocation spans two pages, then reference to farmost one can
be punishable by SEGV. But page walking can do good even on
other OSes, because it guarantees that villain thread hits
the guard page before it can make damage to innocent one...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit adc4f1fc)

Not all assemblers of "gas" flavour handle binary constants, e.g.
seasoned MacOS Xcode doesn't, so give them a hand.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 6e42e3ff)

PVK files with abnormally large length or salt fields can cause an
integer overflow which can result in an OOB read and heap corruption.
However this is an rarely used format and private key files do not
normally come from untrusted sources the security implications not
significant.

Fix by limiting PVK length field to 100K and salt to 10K: these should be
more than enough to cover any files encountered in practice.

Issue reported by Guido Vranken.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5f57abe2)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update mk1mf.pl to properly handle no-weak-ssl-ciphers

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

and reorganize/harmonize post-conditions.

Additional hardening following on from CVE-2016-0702

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from master)

At the same time remove miniscule bias in final subtraction.
Performance penalty varies from platform to platform, and even with
key length. For rsa2048 sign it was observed to be 4% for Sandy
Bridge and 7% on Broadwell.

CVE-2016-0702

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from master)

Performance penalty is 2%.

CVE-2016-0702

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from master)

Performance penalty is 2% on Linux and 5% on Windows.

CVE-2016-0702

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from master)

Performance penalty varies from platform to platform, and even
key length. For rsa2048 sign it was observed to reach almost 10%.

CVE-2016-0702

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from master)

Resolved conflicts:
	crypto/bn/bn_exp.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>

SSLv2 should be off by default. You can only turn it on if you have called
SSL_CTX_clear_options(SSL_OP_NO_SSLv2) or
SSL_clear_options(SSL_OP_NO_SSLv2). You should not be able to inadvertantly
turn it on again via SSL_CONF without having done that first.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

SSLv2 is by default disabled at build-time.  Builds that are not
configured with "enable-ssl2" will not support SSLv2.  Even if
"enable-ssl2" is used, users who want to negotiate SSLv2 via the
version-flexible SSLv23_method() will need to explicitly call either
of:

    SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
or
    SSL_clear_options(ssl, SSL_OP_NO_SSLv2);

as appropriate.  Even if either of those is used, or the application
explicitly uses the version-specific SSLv2_method() or its client
or server variants, SSLv2 ciphers vulnerable to exhaustive search
key recovery have been removed.  Specifically, the SSLv2 40-bit
EXPORT ciphers, and SSLv2 56-bit DES are no longer available.

Mitigation for CVE-2016-0800

Reviewed-by: Emilia Käsper <emilia@openssl.org>

In the BN_hex2bn function the number of hex digits is calculated using
an int value |i|. Later |bn_expand| is called with a value of |i * 4|.
For large values of |i| this can result in |bn_expand| not allocating any
memory because |i * 4| is negative. This leaves ret->d as NULL leading
to a subsequent NULL ptr deref. For very large values of |i|, the
calculation |i * 4| could be a positive value smaller than |i|. In this
case memory is allocated to ret->d, but it is insufficiently sized
leading to heap corruption. A similar issue exists in BN_dec2bn.

This could have security consequences if BN_hex2bn/BN_dec2bn is ever
called by user applications with very large untrusted hex/dec data. This is
anticipated to be a rare occurrence.

All OpenSSL internal usage of this function uses data that is not expected
to be untrusted, e.g. config file data or application command line
arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be a rare.

Issue reported by Guido Vranken.

CVE-2016-0797

Reviewed-by: Andy Polyakov <appro@openssl.org>

Also removes an extra initializer, the master branch has a extra field.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Backport of 98637bd3



Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

backport of 3eb70c5e


shorter changes

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Even though AVX support was added in GAS 2.19 vpclmulqdq was apparently
added in 2.20.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d3cdab17)

This reverts commit 6656ba71

.

This broke existing engines that didn't properly implement the sign and verify
functions.

Reviewed-by: Richard Levitte <levitte@openssl.org>

MR: #2077

The internal |fmtstr| function used in processing a "%s" format string
in the BIO_*printf functions could overflow while calculating the length
of a string and cause an OOB read when printing very long strings.

Additionally the internal |doapr_outch| function can attempt to write to
an OOB memory location (at an offset from the NULL pointer) in the event of
a memory allocation failure. In 1.0.2 and below this could be caused where
the size of a buffer to be allocated is greater than INT_MAX. E.g. this
could be in processing a very long "%s" format string. Memory leaks can also
occur.

These issues will only occur on certain platforms where sizeof(size_t) >
sizeof(int). E.g. many 64 bit systems. The first issue may mask the second
issue dependent on compiler behaviour.

These problems could enable attacks where large amounts of untrusted data
is passed to the BIO_*printf functions. If applications use these functions
in this way then they could be vulnerable. OpenSSL itself uses these
functions when printing out human-readable dumps of ASN.1 data. Therefore
applications that print this data could be vulnerable if the data is from
untrusted sources. OpenSSL command line applications could also be
vulnerable where they print out ASN.1 data, or if untrusted data is passed
as command line arguments.

Libssl is not considered directly vulnerable. Additionally certificates etc
received via remote connections via libssl are also unlikely to be able to
trigger these issues because of message size limits enforced within libssl.

CVE-2016-0799

Issue reported by Guido Vranken.

Reviewed-by: Andy Polyakov <appro@openssl.org>

The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.

Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.

Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.

In Apache, the seed directive is known as SSLSRPUnknownUserSeed.

To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.

Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT#4284

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d9375341)