- Jul 07, 2017
-
-
Pauli authored
Bounds checking strpy, strcat and sprintf. These are the remaining easy ones to cover a recently removed commit. Some are trivial, some have been modified and a couple left as they are because the reverted change didn't bounds check properly. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3871)
-
- Jul 08, 2017
-
-
Richard Levitte authored
Unsigned overflow. Found by Brian Carpenter Fixes #3889 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3890)
-
Rich Salz authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3883)
-
- Jul 07, 2017
-
-
Matt Caswell authored
If the hostname is provided as a positional arg then s_client crashes. The crash occurs as s_client exits (after either a successful or unsuccessful connection attempt). This issue was introduced by commit 729ef856 . Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3881)
-
Matt Caswell authored
SSL_OP_ALL was set in 0x0BFF so reusing some of these bits would cause ABI compatibility issues. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3833)
-
Matt Caswell authored
1.1.0 included the previous value for SSL_OP_ALLOW_NO_DHE_KEX in SSL_OP_ALL. This might cause binary compatibility issues. We should choose a value that is not in SSL_OP_ALL. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3833)
-
Matt Caswell authored
Also the associated configuration parameters and command line switches. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3833)
-
Matt Caswell authored
Allow that mode to be configured if desired. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3833)
-
Matt Caswell authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
Otherwise the ClientHello test fails Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
In most scenarios the length of the input data is the hashsize, or 0 if the data is NULL. However with the new ticket_nonce changes the length can be different. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
Our test was using 32. The latest ticket nonce changes now validate this value and so sslapitest was failing. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
This just adds the processing for sending and receiving the newly added ticket_nonce field. It doesn't actually use it yet. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
-
Matt Caswell authored
We were not freeing the session created when loading a PSK session file. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/3855)
-
Richard Levitte authored
TAP::Parser::Aggregator::has_errors may return any number, not just 0 and 1. With Perl on VMS, any number from 2 and on is interpreted as a VMS status, the 3 lower bits are the encoded severity (1 = SUCCESS, for example), so depending on what has_errors returns, a test failure might be interpreted as a success. Therefore, it's better to make sure the exit code is 0 or 1, nothing else (they are special on VMS, and mean SUCCESS or FAILURE, to match Unix conventions). Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880)
-
Richard Levitte authored
VMS renames our libraries to fit VMS conventions. This must be accounted for when we want to load them. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880)
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880)
-
Andy Polyakov authored
Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/3861)
-
Pauli authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3878)
-
Pauli authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3878)
-
Pauli authored
Some linkers like it this way. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3879)
-
- Jul 06, 2017
-
-
Rich Salz authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3875)
-
Pauli authored
Add length limits to avoid problems with sprintf, strcpy and strcat. This replaces recently removed code but also guards some previously missing function calls (for DOS & Windows). Reworked the BIO_dump_indent_cb code to reduce temporary storage. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3870)
-
Rich Salz authored
Document an internal assumption that these are only for use with files, and return an error if not. That made the code much simpler. Leave it as writing 1024 bytes, even though we don't need more than 256 from a security perspective. But the amount isn't specified, now, so we can change it later if we want. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3864)
-
Pauli authored
Check that sprint, strcpy don't overflow. Avoid some strlen operations when the previous sprintf return value can be used. Also fix the undefined behaviour `*(long *)x = y` when x isn't a long or character pointer. ISO/IEC 9899:1999 6.5/7 for the details. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3869)
-
Pauli authored
This includes strcat, strcpy and sprintf. In the x509 app, the code has been cleaned up as well. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3868)
-
- Jul 05, 2017
-
-
Rich Salz authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3865)
-
Pauli authored
It won't overflow the buffer and will allocate new buffers sufficiently large to hold new strings longer than the expansion factor. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3847)
-
Pauli authored
Clean up some of the formatting "return x" instead of "return (x)" mostly. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3848)
-
Rich Salz authored
[extended tests] Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3700)
-
Rich Salz authored
Original text: Document openssl dgst -hmac option Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3700)
-
Rich Salz authored
Original text: Clarify use of |$end0| in stitched x86-64 AES-GCM code. There was some uncertainty about what the code is doing with |$end0| and whether it was necessary for |$len| to be a multiple of 16 or 96. Hopefully these added comments make it clear that the code is correct except for the caveat regarding low memory addresses. Change-Id: Iea546a59dc7aeb400f50ac5d2d7b9cb88ace9027 Reviewed-on: https://boringssl-review.googlesource.com/7194 Reviewed-by: Adam Langley <agl@google.com> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3700)
-
Rich Salz authored
Comment in the commit: /* Ignore NULLs, thanks to Bob Beck <beck@obtuse.com> */ Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3700)
-
Rich Salz authored
Original text: Check if a random "file" is really a device file, and treat it specially if it is. Add a few OpenBSD-specific cases. This is part of a large change submitted by Markus Friedl <markus@openbsd.or Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3700)
-
Rich Salz authored
Original text: Fix Perl problems on sparc64. This is part of a large change submitted by Markus Friedl <markus@openbsd.org> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3700)
-
Richard Levitte authored
The way try_decode_params works in raw more, it would take the first ASN1 that could decode and return a STORE_INFO with the resulting EVP_PKEY. This change has it go through all the matching ASN1 methods and properly check if there's more than one match, i.e. an ambiguity. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3863)
-
Benjamin Kaduk authored
If the result of a SSL_{CTX_,}set_{min,max}_proto_version() call leaves the min and max version identical, and support for that version is compiled out of the library, return an error. Such an object has no hope of successfully completing a handshake, and this error may be easier to decipher than the resulting handshake failure. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3422)
-