This was complicated by the fact that we were using this extension for our
duplicate extension handling tests. In order to add tests for cryptopro
bug the duplicate extension handling tests needed to change first.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)

The cryptopro extension is supposed to be unsolicited and appears in the
ServerHello only. Additionally it is unofficial and unregistered - therefore
we should really treat it like any other unknown extension if we see it in
the ClientHello.

Fixes #7747

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)

This looks like a copy&paste error from req.pod to x509.pod.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7995)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7985)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7981)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7979)

The stuff needed to build with SIV wasn't in place for s390x

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7988)

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6919)

Added crypto/perlasm/s390x.pm Perl module. Its primary use is to be
independent of binutils version, that is to write byte codes of
instructions that are not part of the base instruction set.
Currently only gas format is supported.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6919)

This enables cleanup to happen on DLL unload instead of at process exit.

[extended tests]

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

This option prevents OpenSSL from pinning itself in memory.

Fixes #7598

[extended tests]

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Test that atexit handlers get called properly at process exit, unless we
have explicitly asked for them not to be.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

The whole point of shlibloadtest is to test dynamically loading and
unloading the library. If we link shlibloadtest against libcrypto then that
might mask potential issues.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7971)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7971)

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7972)

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7962)

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7913)

CLA: Trivial

Fixes #7928.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7973)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7959)

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7716)

CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)

FreeBSD does not enable cryptodev(4) by default.  OpenBSD disabled support
for /dev/crypto by default from 4.9 and removed it from 5.7.  Now the engine
is properly enabled by default on BSD platforms (see #7885), it continuously
complains:

Could not open /dev/crypto: No such file or directory

Hide the nagging error message behind ENGINE_DEVCRYPTO_DEBUG.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7896)

Call to i2d method returns an int value.

Fix:
CID 1338183 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371691 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371692 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)

[extended tests]

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)

CID 1440002 (#1 of 1): Use after free (USE_AFTER_FREE)
Not a deadly error, because error was just before app exit.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)

The way this script handled multiple source directories wasn't quite
right, it ended up giving pod2html 'ARRAY(0xXXXXXXXXX)' as a source
directory.

This corrects the mistake.

Fixes #7742
Fixes #7939

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7911)

The check_key_level() function currently fails when the public key
cannot be extracted from the certificate because its algorithm is not
supported.  However, the public key is not needed for the last
certificate in the chain.

This change moves the check for level 0 before the check for a
non-NULL public key.

For background, this is the TPM 1.2 endorsement key certificate.
I.e., this is a real application with millions of certificates issued.
The key is an RSA-2048 key.

The TCG (for a while) specified

     Public Key Algorithm: rsaesOaep

rather than the commonly used

     Public Key Algorithm: rsaEncryption

because the key is an encryption key rather than a signing key.
The X509 certificate parser fails to get the public key.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7906)

The correct function name is SSL_CTX_enable_ct, not SSL_CTX_ct_enable.

Signed-off-by: Christian Heimes <christian@python.org>

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7916)

Remove some casts on password callback by adding a wrapper function.
Remove level of indent by doing an early-return on failure.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7873)

This implements 3.5.18 "Consistent Public Key and Signature Algorithms"
from RFC 4158 "Internet X.509 Public Key Infrastructure: Certification
Path Building"

Ref: https://tools.ietf.org/html/rfc4158#section-3.5.18



Fixes #7899

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7919)

Fixes #7722

CLA: trivial

Signed-off-by: Mateja Milosevic <quantumgleam@gmail.com>

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7915)

While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.

It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #7554

Fixes: #7183

Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #7260

Use 0 if we don't want to set a minimum or maximum version

Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #7260

It turns out that intialization may change the error number, so we
need to preserve the system error number in functions where
initialization is called for.
These are ERR_get_state() and err_shelve_state()

Fixes #7897

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7902)

Convert CMAC APIs to EVP_MAC APIs

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7891)