- Oct 22, 2018
-
-
Pauli authored
NIST has updated their guidelines in appendix D of SP 800-56B rev2 (draft) providing a formula for the number of security bits it terms of the length of the RSA key. This is an implementation of this formula using fixed point arithmetic. For integers 1 .. 100,000 it rounds down to the next smaller 8 bit strength 270 times. It never errs to the high side. None of the rounded values occur near any of the commonly selected lengths. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7352)
-
Dr. Matthias St. Pierre authored
This bug was introduced by #7382 which enhanced RAND_add() to accept large buffer sizes. As a consequence, RAND_add() now fails for buffer sizes less than 32 bytes (i.e. less than 256 bits). In addition, rand_drbg_get_entropy() forgets to reset the attached drbg->pool in the case of an error, which leads to the heap corruption. The problem occurred with RAND_load_file(), which reads the file in chunks of 1024 bytes each. If the size of the final chunk is less than 32 bytes, then RAND_add() fails, whence RAND_load_file() fails silently for buffer sizes n = k * 1024 + r with r = 1,...,31. This commit fixes the heap corruption only. The other issues will be addressed in a separate pull request. Thanks to Gisle Vanem for reporting this issue. Fixes #7449 Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7455)
-
- Oct 21, 2018
-
-
Richard Levitte authored
We only had targets for the "simple" shared library names (libfoo.so and not libfoo.so.x.y on Unix, import library libfoo.lib but not libfoo.dll on Windows). This has created some confusion why it wasn't possible to rebuild the less "simple" name directly (just as an example, someone who mistook the import library on Windows for a static library, removed the DLL and then found it was difficult to rebuild directly), so we change the target to include all possible names. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7451)
-
- Oct 19, 2018
-
-
Matt Caswell authored
An unknown PSK identity could be because its actually a session resumption attempt. Sessions resumptions and external PSKs are indistinguishable so the callbacks need to fail gracefully if they don't recognise the identity. Fixes #7433 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7434)
-
Matt Caswell authored
Previously when a ClientHello arrives with a valid cookie using DTLSv1_listen() we only "peeked" at the message and left it on the underlying fd. This works fine for single threaded applications but for multi-threaded apps this does not work since the fd is typically reused for the server thread, while a new fd is created and connected for the client. By "peeking" we leave the message on the server fd, and consequently we think we've received another valid ClientHello and so we create yet another fd for the client, and so on until we run out of fds. In this new approach we remove the ClientHello and buffer it in the SSL object. Fixes #6934 Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/7375)
-
Matt Caswell authored
Rather than using init_buf we use the record layer read and write buffers in DTLSv1_listen(). These seem more appropriate anyway and will help with the next commit. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/7375)
-
Matt Caswell authored
Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7431)
-
Matt Caswell authored
Fixes #7428 Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7431)
-
Andy Polyakov authored
Yes, it's second halving, i.e. it's now 1/4 of original size, or more specifically inner loop. The challenge with Keccak is that you need more temporary registers than there are available. By reversing the order in which columns are assigned in Chi, it's possible to use three of A[][] registers as temporary prior their assigment. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7294)
-
Andy Polyakov authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7400)
-
Andy Polyakov authored
{make|swap|get|set}context are removed in POSIX.1-2008, but glibc apparently keeps providing it. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7420)
-
- Oct 18, 2018
-
-
armfazh authored
The formula used for this is now kVarianceBlocks = ((255 + 1 + md_size + md_block_size - 1) / md_block_size) + 1 Notice that md_block_size=64 for SHA256, which results on the magic constant kVarianceBlocks = 6. However, md_block_size=128 for SHA384 leading to kVarianceBlocks = 4. CLA:trivial Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7342)
-
Viktor Dukhovni authored
Also, some readers of the code find starting the count at 1 for EE cert confusing (since RFC5280 counts only non-self-issued intermediate CAs, but we also counted the leaf). Therefore, never count the EE cert, and adjust the path length comparison accordinly. This may be more clear to the reader. Reviewed-by: Matt Caswell <matt@openssl.org>
-
Viktor Dukhovni authored
At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph of above https://tools.ietf.org/html/rfc5280#section-3.3), we see: This specification covers two classes of certificates: CA certificates and end entity certificates. CA certificates may be further divided into three classes: cross-certificates, self-issued certificates, and self-signed certificates. Cross-certificates are CA certificates in which the issuer and subject are different entities. Cross-certificates describe a trust relationship between the two CAs. Self-issued certificates are CA certificates in which the issuer and subject are the same entity. Self-issued certificates are generated to support changes in policy or operations. Self- signed certificates are self-issued certificates where the digital signature may be verified by the public key bound into the certificate. Self-signed certificates are used to convey a public key for use to begin certification paths. End entity certificates are issued to subjects that are not authorized to issue certificates. that the term "self-issued" is only applicable to CAs, not end-entity certificates. In https://tools.ietf.org/html/rfc5280#section-4.2.1.9 the description of path length constraints says: The pathLenConstraint field is meaningful only if the cA boolean is asserted and the key usage extension, if present, asserts the keyCertSign bit (Section 4.2.1.3). In this case, it gives the maximum number of non-self-issued intermediate certificates that may follow this certificate in a valid certification path. (Note: The last certificate in the certification path is not an intermediate certificate, and is not included in this limit. Usually, the last certificate is an end entity certificate, but it can be a CA certificate.) This makes it clear that exclusion of self-issued certificates from the path length count applies only to some *intermediate* CA certificates. A leaf certificate whether it has identical issuer and subject or whether it is a CA or not is never part of the intermediate certificate count. The handling of all leaf certificates must be the same, in the case of our code to post-increment the path count by 1, so that we ultimately reach a non-self-issued intermediate it will be the first one (not zeroth) in the chain of intermediates. Reviewed-by: Matt Caswell <matt@openssl.org>
-
- Oct 17, 2018
-
-
Patrick Steuer authored
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com> Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6813)
-
Patrick Steuer authored
The OPENSSL_s390xcap environment variable is used to set bits in the s390x capability vector to zero. This simplifies testing of different code paths. Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com> Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6813)
-
Antoine Salon authored
Signed-off-by: Antoine Salon <asalon@vmware.com> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/7345)
-
Antoine Salon authored
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63() Signed-off-by: Antoine Salon <asalon@vmware.com> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/7345)
-
Dr. Matthias St. Pierre authored
Commit ffb46830 introduced the 'rand_serial' option. When it is used, the 'serialfile' does not get initialized, i.e. it remains a NULL pointer. This causes a crash when the NULL pointer is passed to the rotate_serial() call. This commit fixes the crash and unifies the pointer checking before calling the rotate_serial() and save_serial() commands. Fixes #7412 Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7417)
-
Richard Levitte authored
When looking at configured macro definitions, we must look at both what comes from the config target AND what comes from user configuration. Fixes #7396 Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/7402)
-
Mansour Ahmadi authored
Reviewed-by: Paul Yang <yang.yang@baishancloud.com> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7405)
-
cclauss authored
CLA: trivial Discovered via #7410 @ https://travis-ci.org/openssl/openssl/jobs/442003489#L440 Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7403)
-
- Oct 16, 2018
-
-
Dr. Matthias St. Pierre authored
In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed() was implemented by buffering the data in a random pool where it is picked up later by the rand_drbg_get_entropy() callback. This buffer was limited to the size of 4096 bytes. When a larger input was added via RAND_add() or RAND_seed() to the DRBG, the reseeding failed, but the error returned by the DRBG was ignored by the two calling functions, which both don't return an error code. As a consequence, the data provided by the application was effectively ignored. This commit fixes the problem by a more efficient implementation which does not copy the data in memory and by raising the buffer the size limit to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits but it was chosen intentionally to avoid platform dependent problems like integer sizes and/or signed/unsigned conversion. Additionally, the DRBG is now less permissive on errors: In addition to pushing a message to the openssl error stack, it enters the error state, which forces a reinstantiation on next call. Thanks go to Dr. Falko Strenzke for reporting this issue to the openssl-security mailing list. After internal discussion the issue has been categorized as not being security relevant, because the DRBG reseeds automatically and is fully functional even without additional randomness provided by the application. Fixes #7381 Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7382)
-
- Oct 13, 2018
-
-
Tomas Mraz authored
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7377)
-
- Oct 12, 2018
-
-
Andy Polyakov authored
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/7123)
-
Andy Polyakov authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7085)
-
Andy Polyakov authored
Negative displacement in memory references was not originally specified, so that for maximum coverage one should abstain from it, just like with any other extension. [Unless it's guarded by run-time switch, but there is no switch in keccak1600-s390x.] Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7239)
-
Matt Caswell authored
Fixes #7385 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7385)
-
- Oct 11, 2018
-
-
Mykola Baibuz authored
We don't need to use secure clean for public key. CLA: trivial Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Paul Yang <yang.yang@baishancloud.com> (Merged from https://github.com/openssl/openssl/pull/7363)
-
Paul Yang authored
The example code in EVP_DigestInit.pod generates warnings if users try to compile it. [skip ci] Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7362)
-
- Oct 10, 2018
-
-
FdaSilvaYY authored
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7378)
-
Dr. Matthias St. Pierre authored
Fixes a compiler warning about an unused syscall_random() and cleans up the OPENSSL_RAND_SEED preprocessor logic. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/779)
-
Matt Caswell authored
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/7365)
-
- Oct 09, 2018
-
-
Benjamin Kaduk authored
As for linux, make bsd-gcc an alias to the solaris semantics for shared library symbol version handling. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7376)
-
Paul Yang authored
Should be 2018 instead of 20018. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7364)
-
- Oct 08, 2018
-
-
Benjamin Kaduk authored
Historically (i.e., OpenSSL 1.0.x), the openssl applications would allow for empty subject attributes to be passed via the -subj argument, e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`. Commit db4c08f0 applied a badly needed rewrite to the parse_name() helper function that parses these strings, but in the process dropped a check that would skip attributes with no associated value. As a result, such strings are now treated as hard errors and the operation fails. Restore the check to skip empty attribute values and restore the historical behavior. Document the behavior for empty subject attribute values in the corresponding applications' manual pages. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7349)
-
Ԝеѕ authored
CLA: trivial Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7356)
-
- Oct 07, 2018
-
-
Pauli authored
The PR #7329 left some indentation slightly off. This fixes it. Reviewed-by: Paul Yang <yang.yang@baishancloud.com> (Merged from https://github.com/openssl/openssl/pull/7360)
-
Mykola Baibuz authored
Hash can be longer than EC group degree and it will be truncated. CLA: trivial Reviewed-by: Paul Yang <yang.yang@baishancloud.com> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7329)
-
- Oct 05, 2018
-
-
Richard Levitte authored
We passed that ioctl a pointer to the whole session_op structure, which wasn't quite right. Notified by David Legault. Fixes #7302 Reviewed-by: Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/7304)
-