Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6cf412c4)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d5a39c12)

Since vendor assembler can't assemble our modules with -KPIC flag,
it, assembly support, was not available as an option. But this
means lack of side-channel resistant code, which is incompatible
with security by todays standards.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 216a0cc4)

This adheres much better to the documentation in test/README

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 377ab6d1)

This reverts commit 7f9ae888

.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 967e831e)

This reverts commit eb40eaed

.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a5e1f123)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 7f9ae888)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ed43fe73)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit bf98d9da)

Because some targets execute perl code that might die, we risk
incomplete lists.  Make it so dying doesn't happen when we're listing
targets.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d63c12c6)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0c0d78b8)

These tests take a very long time on some platforms, and arent't
always strictly necessary.  This makes it possible to turn them
off.  The necessary binaries are still built, though, in case
someone still wants to do a manual run.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit eb40eaed)

crypto/bn/*: x86[_64] division instruction doesn't handle constants, change constraint from 'g' to 'r'.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 68b4a6e9)

Note: some shells do not like the command verb to be quoted, so we avoid
it unless it's actually necessary.

RT#4665

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f879d5ff)

Remove NULL check on parameter, and use NULL not ! on buffer.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit bde588df)

The previous commit revealed a long standing problem where CertStatus
processing was broken in DTLS. This would have been revealed by better
testing - so add some!

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 767ccc3b)

The function tls_construct_cert_status() is called by both TLS and DTLS
code. However it only ever constructed a TLS message header for the message
which obviously failed in DTLS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f046afb0)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ee4cdb7f)

Build file templates would be looked up like this if the user gave us
an additional directory to look for configuration files and build file
templates:

    $OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
    $SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
    $OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
    $SOURCEDIR/Configurations/Makefile.tmpl

So for example, if the user created his own Makefile.tmpl and tried to
use it with a unixly config, it would never be user because we have a
unix-Makefile.tmpl in our Configurations directory.  This is clearly
wrong, and this change makes it look in this order instead:

    $OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
    $OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
    $SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
    $SOURCEDIR/Configurations/Makefile.tmpl

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 79822c3c)

We've done away with Makefile as source of information and now use
configdata.pm exclusively.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit acc63c7d)

Make sure the information is kept for reconfiguration too.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8b5156d1)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit d196305a)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 66117ab0)

Because of a perl operator priority mixup, the --openssldir argument
wasn't honored.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 661a3963)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit e5f969a8)

The definition of STITCHED_CALL relies on OPENSSL_NO_ASM.  However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented.  Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.

For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 216e8d91)

EC DRBG support was added in 7fdcb457

 in 2011 and then later removed.
However the CHANGES entry for its original addition was left behind.
This just removes the spurious CHANGES entry.

Reviewed-by: Stephen Henson <steve@openssl.org>
(cherry picked from commit bbf73f84)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

msan detected an uninit read.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

User can make Windows openssl.exe to treat command-line arguments
and console input as UTF-8 By setting OPENSSL_WIN32_UTF8 environment
variable (to any value). This is likely to be required for data
interchangeability with other OSes and PKCS#12 containers generated
with Windows CryptoAPI.

Reviewed-by: Richard Levitte <levitte@openssl.org>

OpenSSL versions before 1.1.0 didn't convert non-ASCII
UTF8 PKCS#12 passwords to Unicode correctly.

To correctly decrypt older files, if MAC verification fails
with the supplied password attempt to use the broken format
which is compatible with earlier versions of OpenSSL.

Reviewed-by: Richard Levitte <levitte@openssl.org>

To avoid possible race conditions don't switch password format using
global state in crypto/pkcs12

Reviewed-by: Richard Levitte <levitte@openssl.org>

Found by Coverity.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

It should not have been removed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Ensure it is clear to the user why there has been an error.

Reviewed-by: Rich Salz <rsalz@openssl.org>