RC4 based ciphersuites in libssl have been disabled by default. They can
be added back by building OpenSSL with the "enable-weak-ssl-ciphers"
Configure option at compile time.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The proper logic is that both zlib and zlib-dynamic are disabled by
default and that enabling zlib-dynamic would enable zlib.  Somewhere
along the way, the logic got changed, zlib-dynamic was enabled by
default and zlib didn't get automatically enabled.

This change restores the original logic.

Reviewed-by: Rich Salz <rsalz@openssl.org>

PVK files with abnormally large length or salt fields can cause an
integer overflow which can result in an OOB read and heap corruption.
However this is an rarely used format and private key files do not
normally come from untrusted sources the security implications not
significant.

Fix by limiting PVK length field to 100K and salt to 10K: these should be
more than enough to cover any files encountered in practice.

Issue reported by Guido Vranken.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Signed-off-by: Rich Salz <rsalz@akamai.com>

This patch implements the HMAC-based Extract-and-Expand Key Derivation
Function (HKDF) as defined in RFC 5869.

It is required to implement the QUIC and TLS 1.3 protocols (among others).

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

This construct in a Makefile is a bit overzealous:

	@echo FOO
	@FOO

Cleaned up.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

- Remove OPENSSL_X25519_X86_64 which never worked, because we don't have
  the assembly.
- Also remove OPENSSL_SMALL (which should have been
  OPENSSL_SMALL_FOOTPRINT) which isn't a priority at the moment.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

1) Simplify code with better PACKET methods.

2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.

3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.

4) Send an alert on ALPN protocol mismatch.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Utility functions to pass a string or hex string to EVP_PKEY_CTX_ctrl().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Handle KDF in ECDH_compute_key instead of requiring each implementation
support it. This modifies the compute_key method: now it allocates and
populates a buffer containing the shared secret.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>

We copied $target{cflags}, $target{defines} and a few more to %config,
just to add to the entries.  Avoid doing so, and let the build templates
deal with combining the two.

There are a few cases where we still fiddle with %target, but that's
acceptable.

Reviewed-by: Andy Polyakov <appro@openssl.org>

The thread_cflag setting filled a double role, as kinda sorta an
indicator of thread scheme, and as cflags.  Some configs also added
lflags and ex_libs for multithreading regardless of if threading would
be enabled or not.

Instead of this, add threading cflags among in the cflag setting,
threading lflags in the lflag setting and so on if and only if threads
are enabled (which they are by default).

Also, for configs where there are no special cflags for threading (the
VMS configs are of that kind), this makes it possible to still clearly
mention what thread scheme is used.

The exact value of thread scheme is currently ignored except when it's
"(unknown)", and thereby only serves as a flag to tell if we know how
to build for multi-threading in a particular config.  Yet, the
currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a
solaris threads) and "winthreads".

Reviewed-by: Andy Polyakov <appro@openssl.org>

Instead, make the build type ("debug" or "release") available through
$config{build_type} and let the configs themselves figure out what the
usual settings (such as "cflags", "lflags" and so on) should be
accordingly.

The benefit with this is that we can now have debug and release
variants of any setting, not just those Configure supports, and may
also involve other factors (the MSVC flags /MD[d] and /MT[d] involve
both build type and whether threading is enabled or not)

Reviewed-by: Andy Polyakov <appro@openssl.org>

$target{lflags} and $target{plib_flag} were copied to %config for no
good reason.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Configure had the Unix centric addition of -lz when linking with zlib
is enabled, which doesn't work on other platforms.  Therefore, we move
it to the BASE_unix config template and add corresponding ones in the
other BASE_* config templates.  The Windows one is probably incomplete,
but that doesn't matter for the moment, as mk1mf does it's own thing
anyway.

This required making the %withargs table global, so perl snippets in
the configs can use it.

Reviewed-by: Andy Polyakov <appro@openssl.org>

These BASE templates are intended to hold values that are common for
all configuration variants for whole families of configurations.

So far, three "families" are identified: Unix, Windows and VMS, mostly
characterised by the build system they currently use.

Reviewed-by: Andy Polyakov <appro@openssl.org>

This provides for more powerful lazy evaluation and buildup of the
setting contents.  For example, something like this becomes possible:

    defines => [ sub { $config{thisorthat} ? "FOO" : () } ]

Any undefined result of such functions (such as 'undef' or the empty
list) will be ignored.

Reviewed-by: Andy Polyakov <appro@openssl.org>

The global thread local keys were not being deinited properly in async.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The async code uses thread local variables. We should convert to using
the new Thread API for doing this.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This patch provides getters for default_passwd_cb and userdata for SSL
and SSL_CTX. The getter functions are required to port Python's ssl module
to OpenSSL 1.1.0.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

This has no real meaning, except it gives Configure a hint that VC
targets are indeed capable of producing shared objects.

Reviewed-by: Matt Caswell <matt@openssl.org>