Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

(part by Alessandro Ghedini)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Previous OpenSSL versions used -set_serial, but master was using
-set-serial - so rename it back to the old version.

RT#4059

Reviewed-by: Richard Levitte <levitte@openssl.org>

Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.

RT#4085
RT#4086

Reviewed-by: Richard Levitte <levitte@openssl.org>

There used to be options -macopt and -sigopt in <=1.0.2 for the dgst
command line app. These were incorrectly spelled as -macop and -sigop in
master.

RT#4072

Reviewed-by: Andy Polyakov <appro@openssl.org>

The option is not available in older toolchains and would cause breakage.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

PR#4035

Reviewed-by: Matt Caswell <matt@openssl.org>

PR#4079

Reviewed-by: Tim Hudson <tjh@openssl.org>

Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Add the new ct directory to mkfiles.pl and fix the ct Makefile

Reviewed-by: Andy Polyakov <appro@openssl.org>

Original authors:
Rob Stradling <rob@comodo.com>
Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Emilia Kasper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

mkdef.pl was getting confused by:

 # ifdef OPENSSL_NO_RMD160
 #  error RIPEMD is disabled.
 # endif

Changing RIPEMD to RMD160 solves it. Fix suggested by Steve Henson.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The function int_rsa_verify is an internal function used for verifying an
RSA signature. It takes an argument |dtype| which indicates the digest type
that was used. Dependant on that digest type the processing of the
signature data will vary. In particular if |dtype == NID_mdc2| and the
signature data is a bare OCTETSTRING then it is treated differently to the
default case where the signature data is treated as a DigestInfo (X509_SIG).

Due to a missing "else" keyword the logic actually correctly processes the
OCTETSTRING format signature first, and then attempts to continue and
process it as DigestInfo. This will invariably fail because we already know
that it is a bare OCTETSTRING.

This failure doesn't actualy make a real difference because it ends up at
the |err| label regardless and still returns a "success" result. This patch
just cleans things up to make it look a bit more sane.

RT#4076

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1231

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1231

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1231

It returns -1 on error, not 0.

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1231

BN_with_flags() will read the dest->flags to keep the BN_FLG_MALLOCED but
overwrites everything else.

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1231

The function ssl_check_for_safari fingerprints the incoming extensions
to see whether it is one of the broken versions of safari. However it was
failing to reset the PACKET back to the same position it started in, hence
causing some extensions to be skipped incorrectly.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

-Allow mingw debug builds to fail on Travis CI
-Fix Travis email notifications config
-Rename a variable to avoid a bogus warning with old GCC
 error: declaration of ``dup'' shadows a global declaration [-Werror=shadow]
-Disable pedantic ms-format warnings with mingw
-Properly define const DH parameters
-Restore --debug flag in Travis CI builds; -d would get incorrectly passed
 to ./Configure in mingw debug builds.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

This change introduces short names and NIDs for Russian GOST ciphers
according to GOST R 34.13-2015

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

RT#4069

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

The user callback takes a non-const pointer, so don't pass PACKET data
to it directly; rather, grab a local copy.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix alerts.

Reviewed-by: Matt Caswell <matt@openssl.org>

Move all packet parsing to the beginning of the method. This limits the
SSLv2 compatibility soup to the parsing, and makes the rest of the
processing uniform.

This is also needed for simpler EMS support: EMS servers need to do an
early scan for EMS to make resumption decisions. This'll be easier when
the entire ClientHello is parsed in the beginning.

As a side effect,
1) PACKETize ssl_get_prev_session and tls1_process_ticket; and
2) Delete dead code for SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Ben Laurie <ben@openssl.org>

Some makedepend mechanisms remove all directory information in the
target, so a dependency can looks like this:

ssl3_record.o: record/ssl3_record.c

However, that doesn't quite suit us, our Makefile has us build
record/ssl3_record.o rather than ssl3_record.o.

To clear this up, a change to util/clean-depend.pl takes care of this
case by looking up the original file in the dependencies and restoring
the directory information from it.

Reviewed-by: Ben Laurie <ben@openssl.org>