Newer
Older
+) Change the Unix RAND_poll() variant to be able to poll several
Richard Levitte
committed
random devices, as specified by DEVRANDOM, until a sufficient amount
of data has been collected. We spend at most 10 ms on each file
(select timeout) and read in non-blocking mode. DEVRANDOM now
defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
(previously it was just the string "/dev/urandom"), so on typical
platforms the 10 ms delay will never occur.
Also separate out the Unix variant to its own file, rand_unix.c.
For VMS, there's a currently-empty rand_vms.c.
[Richard Levitte]
+) Move OCSP client related routines to ocsp_cl.c. These
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
provide utility functions which an application needing
to issue a request to an OCSP responder and analyse the
response will typically need: as opposed to those which an
OCSP responder itself would need which will be added later.
OCSP_request_sign() signs an OCSP request with an API similar
to PKCS7_sign(). OCSP_response_status() returns status of OCSP
response. OCSP_response_get1_basic() extracts basic response
from response. OCSP_resp_find_status(): finds and extracts status
information from an OCSP_CERTID structure (which will be created
when the request structure is built). These are built from lower
level functions which work on OCSP_SINGLERESP structures but
wont normally be used unless the application wishes to examine
extensions in the OCSP response for example.
Replace nonce routines with a pair of functions.
OCSP_request_add1_nonce() adds a nonce value and optionally
generates a random value. OCSP_check_nonce() checks the
validity of the nonce in an OCSP response.
[Steve Henson]
+) Change function OCSP_request_add() to OCSP_request_add0_id().
This doesn't copy the supplied OCSP_CERTID and avoids the
need to free up the newly created id. Change return type
to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
This can then be used to add extensions to the request.
Deleted OCSP_request_new(), since most of its functionality
is now in OCSP_REQUEST_new() (and the case insensitive name
clash) apart from the ability to set the request name which
will be added elsewhere.
[Steve Henson]
+) Update OCSP API. Remove obsolete extensions argument from
various functions. Extensions are now handled using the new
OCSP extension code. New simple OCSP HTTP function which
can be used to send requests and parse the response.
[Steve Henson]
+) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
uses the special reorder version of SET OF to sort the attributes
and reorder them to match the encoded order. This resolves a long
standing problem: a verify on a PKCS7 structure just after signing
it used to fail because the attribute order did not match the
encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
it uses the received order. This is necessary to tolerate some broken
software that does not order SET OF. This is handled by encoding
as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
to produce the required SET OF.
[Steve Henson]
+) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
files to get correct declarations of the ASN.1 item variables.
[Richard Levitte]
+) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
ASN1_ITEM and no wrapper functions.
[Steve Henson]
+) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
replace the old function pointer based I/O routines. Change most of
the *_d2i_bio() and *_d2i_fp() functions to use these.
[Steve Henson]
+) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
lines, recognice more "algorithms" that can be deselected, and make
it complain about algorithm deselection that isn't recognised.
[Richard Levitte]
+) New ASN1 functions to handle dup, sign, verify, digest, pack and
unpack operations in terms of ASN1_ITEM. Modify existing wrappers
to use new functions. Add NO_ASN1_OLD which can be set to remove
some old style ASN1 functions: this can be used to determine if old
code will still work when these eventually go away.
[Steve Henson]
+) New extension functions for OCSP structures, these follow the
same conventions as certificates and CRLs.
[Steve Henson]
+) New function X509V3_add1_i2d(). This automatically encodes and
adds an extension. Its behaviour can be customised with various
flags to append, replace or delete. Various wrappers added for
certifcates and CRLs.
[Steve Henson]
+) Fix to avoid calling the underlying ASN1 print routine when
an extension cannot be parsed. Correct a typo in the
OCSP_SERVICELOC extension. Tidy up print OCSP format.
[Steve Henson]
*) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
when writing a 32767 byte record.
[Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
*) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
(RSA objects have a reference count access to which is protected
by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
so they are meant to be shared between threads.)
[Bodo Moeller, Geoff Thorpe; original patch submitted by
"Reddie, Steven" <Steven.Reddie@ca.com>]
+) Make mkdef.pl parse some of the ASN1 macros and add apropriate
entries for variables.
*) Fix a deadlock in CRYPTO_mem_leaks().
[Bodo Moeller]
+) Add functionality to apps/openssl.c for detecting locking
problems: As the program is single-threaded, all we have
to do is register a locking callback using an array for
storing which locks are currently held by the program.
[Bodo Moeller]
+) Use a lock around the call to CRYPTO_get_ex_new_index() in
SSL_get_ex_data_X509_STORE_idx(), which is used in
ssl_verify_cert_chain() and thus can be called at any time
during TLS/SSL handshakes so that thread-safety is essential.
Unfortunately, the ex_data design is not at all suited
for multi-threaded use, so it probably should be abolished.
[Bodo Moeller]
+) Added Broadcom "ubsec" ENGINE to OpenSSL.
[Broadcom, tweaked and integrated by Geoff Thorpe]
+) Move common extension printing code to new function
Dr. Stephen Henson
committed
X509V3_print_extensions(). Reorganise OCSP print routines and
implement some needed OCSP ASN1 functions. Add OCSP extensions.
Dr. Stephen Henson
committed
[Steve Henson]
+) New function X509_signature_print() to remove duplication in some
print routines.
[Steve Henson]
+) Add a special meaning when SET OF and SEQUENCE OF flags are both
set (this was treated exactly the same as SET OF previously). This
is used to reorder the STACK representing the structure to match the
encoding. This will be used to get round a problem where a PKCS7
structure which was signed could not be verified because the STACK
order did not reflect the encoded order.
[Steve Henson]
+) Reimplement the OCSP ASN1 module using the new code.
+) Update the X509V3 code to permit the use of an ASN1_ITEM structure
for its ASN1 operations. The old style function pointers still exist
for now but they will eventually go away.
[Steve Henson]
+) Merge in replacement ASN1 code from the ASN1 branch. This almost
completely replaces the old ASN1 functionality with a table driven
encoder and decoder which interprets an ASN1_ITEM structure describing
the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
largely maintained. Almost all of the old asn1_mac.h macro based ASN1
has also been converted to the new form.
+) Change BN_mod_exp_recp so that negative moduli are tolerated
(the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
so that BN_mod_exp_mont and BN_mod_exp_mont_word work
for negative moduli.
[Bodo Moeller]
+) Fix BN_uadd and BN_usub: Always return non-negative results instead
of not touching the result's sign bit.
[Bodo Moeller]
+) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
+) Changed the LHASH code to use prototypes for callbacks, and created
macros to declare and implement thin (optionally static) functions
that provide type-safety and avoid function pointer casting for the
type-specific callbacks.
[Geoff Thorpe]
*) Use better test patterns in bntest.
[Ulf Möller]
+) Added Kerberos Cipher Suites to be used with TLS, as written in
[Veers Staats <staatsvr@asc.hpc.mil>,
Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
*) BN_rshift bugfix for n == 0.
[Bodo Moeller]
+) Reformat the FAQ so the different questions and answers can be divided
[Richard Levitte]
+) Have the zlib compression code load ZLIB.DLL dynamically under
Windows.
[Richard Levitte]
+) New function BN_mod_sqrt for computing square roots modulo a prime
(using the probabilistic Tonelli-Shanks algorithm unless
p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
be handled deterministically).
[Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
*) Add a 'bctest' script that checks for some known 'bc' bugs
so that 'make test' does not abort just because 'bc' is broken.
[Bodo Moeller]
*) Store verify_result within SSL_SESSION also for client side to
avoid potential security hole. (Re-used sessions on the client side
always resulted in verify_result==X509_V_OK, not using the original
result of the server certificate verification.)
[Lutz Jaenicke]
+) Make BN_mod_inverse faster by explicitly handling small quotients
in the Euclid loop. (Speed gain about 20% for small moduli [256 or
512 bits], about 30% for larger ones [1024 or 2048 bits].)
*) Fix ssl3_pending: If the record in s->s3->rrec is not of type
SSL3_RT_APPLICATION_DATA, return 0.
Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
[Bodo Moeller]
*) Fix SSL_peek:
Both ssl2_peek and ssl3_peek, which were totally broken in earlier
releases, have been re-implemented by renaming the previous
implementations of ssl2_read and ssl3_read to ssl2_read_internal
and ssl3_read_internal, respectively, and adding 'peek' parameters
to them. The new ssl[23]_{read,peek} functions are calls to
ssl[23]_read_internal with the 'peek' flag set appropriately.
A 'peek' parameter has also been added to ssl3_read_bytes, which
does the actual work for ssl3_read_internal.
+) New function BN_kronecker.
+) Fix BN_gcd so that it works on negative inputs; the result is
positive unless both parameters are zero.
Previously something reasonably close to an infinite loop was
possible because numbers could be growing instead of shrinking
in the implementation of Euclid's algorithm.
[Bodo Moeller]
+) Fix BN_is_word() and BN_is_one() macros to take into account the
sign of the number in question.
Fix BN_is_word(a,w) to work correctly for w == 0.
The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
because its test if the absolute value of 'a' equals 'w'.
Note that BN_abs_is_word does *not* handle w == 0 reliably;
it exists mostly for use in the implementations of BN_is_zero(),
BN_is_one(), and BN_is_word().
[Bodo Moeller]
*) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
the method-specific "init()" handler. Also clean up ex_data after
calling the method-specific "finish()" handler. Previously, this was
happening the other way round.
[Geoff Thorpe]
+) New function BN_swap.
+) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
the exponentiation functions are more likely to produce reasonable
results on negative inputs.
[Bodo Moeller]
+) Change BN_mod_mul so that the result is always non-negative.
Previously, it could be negative if one of the factors was negative;
I don't think anyone really wanted that behaviour.
[Bodo Moeller]
+) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
(except for exponentiation, which stays in crypto/bn/bn_exp.c,
and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
and add new functions:
BN_mod_sub_quick
BN_mod_lshift1
BN_mod_lshift1_quick
BN_mod_lshift
BN_mod_lshift_quick
These functions always generate non-negative results.
BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
be reduced modulo m.
[Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
+) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
was actually never needed) and in BN_mul(). The removal in BN_mul()
required a small change in bn_mul_part_recursive() and the addition
of the functions bn_cmp_part_words(), bn_sub_part_words() and
bn_add_part_words(), which do the same thing as bn_cmp_words(),
bn_sub_words() and bn_add_words() except they take arrays with
differing sizes.
[Richard Levitte]
+) In 'openssl passwd', verify passwords read from the terminal
unless the '-salt' option is used (which usually means that
verification would just waste user's time since the resulting
hash is going to be compared with some given password hash)
or the new '-noverify' option is used.
This is an incompatible change, but it does not affect
non-interactive use of 'openssl passwd' (passwords on the command
line, '-stdin' option, '-in ...' option) and thus should not
cause any problems.
[Bodo Moeller]
+) Remove all references to RSAref, since there's no more need for it.
[Richard Levitte]
*) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
The previous value, 12, was not always sufficient for BN_mod_exp().
[Bodo Moeller]
+) Make DSO load along a path given through an environment variable
(SHLIB_PATH) with shl_load().
[Richard Levitte]
+) Constify the ENGINE code as a result of BIGNUM constification.
Also constify the RSA code and most things related to it. In a
few places, most notable in the depth of the ASN.1 code, ugly
casts back to non-const were required (to be solved at a later
time)
[Richard Levitte]
+) Make it so the openssl application has all engines loaded by default.
[Richard Levitte]
+) Constify the BIGNUM routines a little more.
[Richard Levitte]
*) Make sure that shared libraries get the internal name engine with
the full version number and not just 0. This should mark the
shared libraries as not backward compatible. Of course, this should
be changed again when we can guarantee backward binary compatibility.
[Richard Levitte]
+) Add the following functions:
ENGINE_load_cswift()
ENGINE_load_chil()
ENGINE_load_atalla()
ENGINE_load_nuron()
ENGINE_load_builtin_engines()
That way, an application can itself choose if external engines that
are built-in in OpenSSL shall ever be used or not. The benefit is
that applications won't have to be linked with libdl or other dso
libraries unless it's really needed.
Changed 'openssl engine' to load all engines on demand.
Changed the engine header files to avoid the duplication of some
declarations (they differed!).
[Richard Levitte]
+) 'openssl engine' can now list capabilities.
[Richard Levitte]
+) Better error reporting in 'openssl engine'.
+) Never call load_dh_param(NULL) in s_server.
[Bodo Moeller]
+) Add engine application. It can currently list engines by name and
identity, and test if they are actually available.
[Richard Levitte]
+) Add support for shared libraries under Irix.
[Albert Chin-A-Young <china@thewrittenword.com>]
+) Improve RPM specification file by forcing symbolic linking and making
sure the installed documentation is also owned by root.root.
[Damien Miller <djm@mindrot.org>]
+) Add configuration option to build on Linux on both big-endian and
little-endian MIPS.
[Ralf Baechle <ralf@uni-koblenz.de>]
+) Give the OpenSSL applications more possibilities to make use of
keys (public as well as private) handled by engines.
[Richard Levitte]
+) Add OCSP code that comes from CertCo.
+) Add VMS support for the Rijndael code.
[Richard Levitte]
+) Added untested support for Nuron crypto accelerator.
[Ben Laurie]
+) Add support for external cryptographic devices. This code was
previously distributed separately as the "engine" branch.
[Geoff Thorpe, Richard Levitte]
+) Rework the filename-translation in the DSO code. It is now possible to
have far greater control over how a "name" is turned into a filename
depending on the operating environment and any oddities about the
different shared library filenames on each system.
[Geoff Thorpe]
+) Support threads on FreeBSD-elf in Configure.
+) Add the possibility to create shared libraries on HP-UX
[Richard Levitte]
+) Fix for SHA1 assembly problem with MASM: it produces
warnings about corrupt line number information when assembling
with debugging information. This is caused by the overlapping
of two sections.
[Bernd Matthes <mainbug@celocom.de>, Steve Henson]
+) NCONF changes.
NCONF_get_number() has no error checking at all. As a replacement,
NCONF_get_number_e() is defined (_e for "error checking") and is
promoted strongly. The old NCONF_get_number is kept around for
binary backward compatibility.
Make it possible for methods to load from something other than a BIO,
by providing a function pointer that is given a name instead of a BIO.
For example, this could be used to load configuration data from an
LDAP server.
[Richard Levitte]
*) Fix typo in get_cert_by_subject() in by_dir.c
[Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
*) Rework the system to generate shared libraries:
- Make note of the expected extension for the shared libraries and
if there is a need for symbolic links from for example libcrypto.so.0
to libcrypto.so.0.9.7. There is extended info in Configure for
that.
- Make as few rebuilds of the shared libraries as possible.
- Still avoid linking the OpenSSL programs with the shared libraries.
- When installing, install the shared libraries separately from the
static ones.
[Richard Levitte]
+) Fix for non blocking accept BIOs. Added new I/O special reason
BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
with non blocking I/O was not possible because no retry code was
implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
this case.
[Steve Henson]
+) Added the beginnings of Rijndael support.
[Ben Laurie]
+) Fix for bug in DirectoryString mask setting. Add support for
X509_NAME_print_ex() in 'req' and X509_print_ex() function
to allow certificate printing to more controllable, additional
'certopt' option to 'x509' to allow new printing options to be
set.
+) Clean old EAY MD5 hack from e_os.h.
*) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
and not in SSL_clear because the latter is also used by the
accept/connect functions; previously, the settings made by
SSL_set_read_ahead would be lost during the handshake.
[Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
*) Correct util/mkdef.pl to be selective about disabled algorithms.
Previously, it would create entries for disableed algorithms no
matter what.
[Richard Levitte]
*) Added several new manual pages for SSL_* function.
[Lutz Jaenicke]
Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
*) In ssl23_get_client_hello, generate an error message when faced
with an initial SSL 3.0/TLS record that is too small to contain the
first two bytes of the ClientHello message, i.e. client_version.
(Note that this is a pathologic case that probably has never happened
in real life.) The previous approach was to use the version number
should not depend on that one because it is not authenticated
by the Finished messages.
[Bodo Moeller]
*) More robust randomness gathering functions for Windows.
[Jeffrey Altman <jaltman@columbia.edu>]
*) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
not set then we don't setup the error code for issuer check errors
to avoid possibly overwriting other errors which the callback does
handle. If an application does set the flag then we assume it knows
what it is doing and can handle the new informational codes
appropriately.
[Steve Henson]
*) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
a general "ANY" type, as such it should be able to decode anything
including tagged types. However it didn't check the class so it would
wrongly interpret tagged types in the same way as their universal
counterpart and unknown types were just rejected. Changed so that the
tagged and unknown types are handled in the same way as a SEQUENCE:
that is the encoding is stored intact. There is also a new type
"V_ASN1_OTHER" which is used when the class is not universal, in this
case we have no idea what the actual type is so we just lump them all
together.
[Steve Henson]
*) On VMS, stdout may very well lead to a file that is written to
in a record-oriented fashion. That means that every write() will
write a separate record, which will be read separately by the
programs trying to read from it. This can be very confusing.
The solution is to put a BIO filter in the way that will buffer
text until a linefeed is reached, and then write everything a
line at a time, so every record written will be an actual line,
not chunks of lines and not (usually doesn't happen, but I've
seen it once) several lines in one record. BIO_f_linebuffer() is
the answer.
Currently, it's a VMS-only method, because that's where it has
been tested well enough.
[Richard Levitte]
*) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
(Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
but it was in 0.9.6-beta[12].)
*) Disable the check for content being present when verifying detached
signatures in pk7_smime.c. Some versions of Netscape (wrongly)
include zero length content when signing messages.
[Steve Henson]
*) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
BIO_ctrl (for BIO pairs).
*) Add DSO method for VMS.
[Richard Levitte]
*) Bug fix: Montgomery multiplication could produce results with the
wrong sign.
[Ulf Möller]
*) Add RPM specification openssl.spec and modify it to build three
packages. The default package contains applications, application
documentation and run-time libraries. The devel package contains
include files, static libraries and function documentation. The
doc package contains the contents of the doc directory. The original
openssl.spec was provided by Damien Miller <djm@mindrot.org>.
[Richard Levitte]
*) Add a large number of documentation files for many SSL routines.
[Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
*) Add a configuration entry for Sony News 4.
[NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
*) Don't set the two most significant bits to one when generating a
random number < q in the DSA library.
[Ulf Möller]
*) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
the underlying transport is blocking) if a handshake took place.
(The default behaviour is needed by applications such as s_client
and s_server that use select() to determine when to use SSL_read;
but for applications that know in advance when to expect data, it
just makes things more complicated.)
[Bodo Moeller]
*) Add RAND_egd_bytes(), which gives control over the number of bytes read
from EGD.
[Ben Laurie]
*) Add a few more EBCDIC conditionals that make `req' and `x509'
work better on such systems.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
*) Add two demo programs for PKCS12_parse() and PKCS12_create().
Update PKCS12_parse() so it copies the friendlyName and the
keyid to the certificates aux info.
[Steve Henson]
*) Fix bug in PKCS7_verify() which caused an infinite loop
if there was more than one signature.
[Sven Uszpelkat <su@celocom.de>]
*) Major change in util/mkdef.pl to include extra information
about each symbol, as well as presentig variables as well
as functions. This change means that there's n more need
to rebuild the .num files when some algorithms are excluded.
[Richard Levitte]
*) Allow the verify time to be set by an application,
rather than always using the current time.
[Steve Henson]
*) Phase 2 verify code reorganisation. The certificate
verify code now looks up an issuer certificate by a
number of criteria: subject name, authority key id
and key usage. It also verifies self signed certificates
by the same criteria. The main comparison function is
X509_check_issued() which performs these checks.
Lot of changes were necessary in order to support this
without completely rewriting the lookup code.
Authority and subject key identifier are now cached.
The LHASH 'certs' is X509_STORE has now been replaced
by a STACK_OF(X509_OBJECT). This is mainly because an
LHASH can't store or retrieve multiple objects with
the same hash value.
As a result various functions (which were all internal
use only) have changed to handle the new X509_STORE
structure. This will break anything that messed round
with X509_STORE internally.
The functions X509_STORE_add_cert() now checks for an
exact match, rather than just subject name.
The X509_STORE API doesn't directly support the retrieval
of multiple certificates matching a given criteria, however
this can be worked round by performing a lookup first
(which will fill the cache with candidate certificates)
and then examining the cache for matches. This is probably
the best we can do without throwing out X509_LOOKUP
entirely (maybe later...).
The X509_VERIFY_CTX structure has been enhanced considerably.
All certificate lookup operations now go via a get_issuer()
callback. Although this currently uses an X509_STORE it
can be replaced by custom lookups. This is a simple way
to bypass the X509_STORE hackery necessary to make this
work and makes it possible to use more efficient techniques
in future. A very simple version which uses a simple
STACK for its trusted certificate store is also provided
using X509_STORE_CTX_trusted_stack().
The verify_cb() and verify() callbacks now have equivalents
in the X509_STORE_CTX structure.
X509_STORE_CTX also has a 'flags' field which can be used
to customise the verify behaviour.
[Steve Henson]
*) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
excludes S/MIME capabilities.
[Steve Henson]
*) When a certificate request is read in keep a copy of the
original encoding of the signed data and use it when outputing
again. Signatures then use the original encoding rather than
a decoded, encoded version which may cause problems if the
request is improperly encoded.
[Steve Henson]
*) For consistency with other BIO_puts implementations, call
buffer_write(b, ...) directly in buffer_puts instead of calling
BIO_write(b, ...).
In BIO_puts, increment b->num_write as in BIO_write.
*) Fix BN_mul_word for the case where the word is 0. (We have to use
BN_zero, we may not return a BIGNUM with an array consisting of
words set to zero.)
[Bodo Moeller]
*) Avoid calling abort() from within the library when problems are
detected, except if preprocessor symbols have been defined
(such as REF_CHECK, BN_DEBUG etc.).
[Bodo Moeller]
*) New openssl application 'rsautl'. This utility can be
used for low level RSA operations. DER public key
BIO/fp routines also added.
[Steve Henson]
*) New Configure entry and patches for compiling on QNX 4.
[Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
*) A demo state-machine implementation was sponsored by
Nuron (http://www.nuron.com/) and is now available in
demos/state_machine.
[Ben Laurie]
*) New options added to the 'dgst' utility for signature
generation and verification.
[Steve Henson]
*) Unrecognized PKCS#7 content types are now handled via a
catch all ASN1_TYPE structure. This allows unsupported
types to be stored as a "blob" and an application can
encode and decode it manually.
[Steve Henson]
*) Fix various signed/unsigned issues to make a_strex.c
compile under VC++.
[Oscar Jacobsson <oscar.jacobsson@celocom.com>]
*) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
length if passed a buffer. ASN1_INTEGER_to_BN failed
if passed a NULL BN and its argument was negative.
[Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
*) Modification to PKCS#7 encoding routines to output definite
length encoding. Since currently the whole structures are in
memory there's not real point in using indefinite length
constructed encoding. However if OpenSSL is compiled with
the flag PKCS7_INDEFINITE_ENCODING the old form is used.
[Steve Henson]
*) Added BIO_vprintf() and BIO_vsnprintf().
[Richard Levitte]
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
*) Added more prefixes to parse for in the the strings written
through a logging bio, to cover all the levels that are available
through syslog. The prefixes are now:
PANIC, EMERG, EMR => LOG_EMERG
ALERT, ALR => LOG_ALERT
CRIT, CRI => LOG_CRIT
ERROR, ERR => LOG_ERR
WARNING, WARN, WAR => LOG_WARNING
NOTICE, NOTE, NOT => LOG_NOTICE
INFO, INF => LOG_INFO
DEBUG, DBG => LOG_DEBUG
and as before, if none of those prefixes are present at the
beginning of the string, LOG_ERR is chosen.
On Win32, the LOG_* levels are mapped according to this:
LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
LOG_WARNING => EVENTLOG_WARNING_TYPE
LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
[Richard Levitte]
*) Made it possible to reconfigure with just the configuration
argument "reconf" or "reconfigure". The command line arguments
are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
and are retrieved from there when reconfiguring.
[Richard Levitte]
Richard Levitte
committed
*) MD4 implemented.
[Assar Westerlund <assar@sics.se>, Richard Levitte]
Richard Levitte
committed
*) Add the arguments -CAfile and -CApath to the pkcs12 utility.
[Richard Levitte]
*) The obj_dat.pl script was messing up the sorting of object
names. The reason was that it compared the quoted version
of strings as a result "OCSP" > "OCSP Signing" because
" > SPACE. Changed script to store unquoted versions of
names and add quotes on output. It was also omitting some
names from the lookup table if they were given a default
value (that is if SN is missing it is given the same
value as LN and vice versa), these are now added on the
grounds that if an object has a name we should be able to
look it up. Finally added warning output when duplicate
short or long names are found.
[Steve Henson]
Dr. Stephen Henson
committed
*) Changes needed for Tandem NSK.
Dr. Stephen Henson
committed
*) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
RSA_padding_check_SSLv23(), special padding was never detected
and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
version rollback attacks was not effective.
In s23_clnt.c, don't use special rollback-attack detection padding
(RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
client; similarly, in s23_srvr.c, don't do the rollback check if
SSL 2.0 is the only protocol enabled in the server.
[Bodo Moeller]
*) Make it possible to get hexdumps of unprintable data with 'openssl
asn1parse'. By implication, the functions ASN1_parse_dump() and
BIO_dump_indent() are added.
[Richard Levitte]
*) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
these print out strings and name structures based on various
flags including RFC2253 support and proper handling of
multibyte characters. Added options to the 'x509' utility
to allow the various flags to be set.
[Steve Henson]
*) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
Also change the functions X509_cmp_current_time() and
X509_gmtime_adj() work with an ASN1_TIME structure,
this will enable certificates using GeneralizedTime in validity
dates to be checked.
[Steve Henson]
*) Make the NEG_PUBKEY_BUG code (which tolerates invalid
negative public key encodings) on by default,
NO_NEG_PUBKEY_BUG can be set to disable it.
[Steve Henson]
*) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
content octets. An i2c_ASN1_OBJECT is unnecessary because
the encoding can be trivially obtained from the structure.
[Steve Henson]
*) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
not read locks (CRYPTO_r_[un]lock).
[Bodo Moeller]
*) A first attempt at creating official support for shared
libraries through configuration. I've kept it so the
default is static libraries only, and the OpenSSL programs
are always statically linked for now, but there are
preparations for dynamic linking in place.
This has been tested on Linux and True64.
[Richard Levitte]
*) Randomness polling function for Win9x, as described in:
Peter Gutmann, Software Generation of Practically Strong
Random Numbers.
[Ulf Möller]
*) Fix so PRNG is seeded in req if using an already existing
DSA key.
[Steve Henson]
*) New options to smime application. -inform and -outform
allow alternative formats for the S/MIME message including
PEM and DER. The -content option allows the content to be
specified separately. This should allow things like Netscape
form signing output easier to verify.
[Steve Henson]
*) Fix the ASN1 encoding of tags using the 'long form'.
[Steve Henson]
*) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
STRING types. These convert content octets to and from the
underlying type. The actual tag and length octets are
already assumed to have been read in and checked. These
are needed because all other string types have virtually
identical handling apart from the tag. By having versions
of the ASN1 functions that just operate on content octets
IMPLICIT tagging can be handled properly. It also allows
the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
and ASN1_INTEGER are identical apart from the tag.
[Steve Henson]
*) Change the handling of OID objects as follows:
- New object identifiers are inserted in objects.txt, following
the syntax given in objects.README.
- objects.pl is used to process obj_mac.num and create a new
obj_mac.h.
- obj_dat.pl is used to create a new obj_dat.h, using the data in
obj_mac.h.
This is currently kind of a hack, and the perl code in objects.pl
isn't very elegant, but it works as I intended. The simplest way
to check that it worked correctly is to look in obj_dat.h and
check the array nid_objs and make sure the objects haven't moved
around (this is important!). Additions are OK, as well as
consistent name changes.
[Richard Levitte]
*) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
[Bodo Moeller]
*) Addition of the command line parameter '-rand file' to 'openssl req'.
The given file adds to whatever has already been seeded into the
random pool through the RANDFILE configuration file option or
environment variable, or the default random state file.
*) mkstack.pl now sorts each macro group into lexical order.
Previously the output order depended on the order the files
appeared in the directory, resulting in needless rewriting
of safestack.h .
[Steve Henson]
*) Patches to make OpenSSL compile under Win32 again. Mostly
work arounds for the VC++ problem that it treats func() as
func(void). Also stripped out the parts of mkdef.pl that
added extra typesafe functions: these no longer exist.
[Steve Henson]
*) Reorganisation of the stack code. The macros are now all
collected in safestack.h . Each macro is defined in terms of
a "stack macro" of the form SKM_<name>(type, a, b). The
DEBUG_SAFESTACK is now handled in terms of function casts,
this has the advantage of retaining type safety without the
use of additional functions. If DEBUG_SAFESTACK is not defined
then the non typesafe macros are used instead. Also modified the
mkstack.pl script to handle the new form. Needs testing to see
if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
the default if no major problems. Similar behaviour for ASN1_SET_OF
and PKCS12_STACK_OF.
[Steve Henson]
*) When some versions of IIS use the 'NET' form of private key the
key derivation algorithm is different. Normally MD5(password) is
used as a 128 bit RC4 key. In the modified case
MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
as the old Netscape_RSA functions except they have an additional
'sgckey' parameter which uses the modified algorithm. Also added
an -sgckey command line option to the rsa utility. Thanks to
Adrian Peck <bertie@ncipher.com> for posting details of the modified
algorithm to openssl-dev.
[Steve Henson]
*) The evp_local.h macros were using 'c.##kname' which resulted in
invalid expansion on some systems (SCO 5.0.5 for example).
Corrected to 'c.kname'.
[Phillip Porch <root@theporch.com>]
*) New X509_get1_email() and X509_REQ_get1_email() functions that return
a STACK of email addresses from a certificate or request, these look
in the subject name and the subject alternative name extensions and
omit any duplicate addresses.
[Steve Henson]
*) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
This makes DSA verification about 2 % faster.
[Bodo Moeller]
*) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
(meaning that now 2^5 values will be precomputed, which is only 4 KB
plus overhead for 1024 bit moduli).
This makes exponentiations about 0.5 % faster for 1024 bit
exponents (as measured by "openssl speed rsa2048").
[Bodo Moeller]
*) Rename memory handling macros to avoid conflicts with other
software:
Malloc => OPENSSL_malloc
Malloc_locked => OPENSSL_malloc_locked
Realloc => OPENSSL_realloc
Free => OPENSSL_free
[Richard Levitte]
*) New function BN_mod_exp_mont_word for small bases (roughly 15%
faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).