Newer
Older
Ralf S. Engelschall
committed
_______________
Changes between 1.0.2g and 1.1.0 [xx XXX xxxx]
*) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
disabled by default. They can be re-enabled using the
enable-weak-ssl-ciphers option to Configure.
[Matt Caswell]
*) If the server has ALPN configured, but supports no protocols that the
client advertises, send a fatal "no_application_protocol" alert.
This behaviour is SHALL in RFC 7301, though it isn't universally
implemented by other servers.
[Emilia Käsper]
*) Add X25519 support.
Integrate support for X25519 into EC library. This includes support
for public and private key encoding using the format documented in
draft-josefsson-pkix-newcurves-01: specifically X25519 uses the
OID from that draft, encodes public keys using little endian
format in the ECPoint structure and private keys using
little endian form in the privateKey field of the ECPrivateKey
structure. TLS support complies with draft-ietf-tls-rfc4492bis-06
and uses X25519(29).
Note: the current version supports key generation, public and
private key encoding and ECDH key agreement using the EC API.
Low level point operations such as EC_POINT_add(), EC_POINT_mul()
are NOT supported.
[Steve Henson]
*) Deprecate SRP_VBASE_get_by_user.
SRP_VBASE_get_by_user had inconsistent memory management behaviour.
In order to fix an unavoidable memory leak (CVE-2016-0798),
SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
seed, even if the seed is configured.
Users should use SRP_VBASE_get1_by_user instead. Note that in
SRP_VBASE_get1_by_user, caller must free the returned value. Note
also that even though configuring the SRP seed attempts to hide
invalid usernames by continuing the handshake with fake
credentials, this behaviour is not constant time and no strong
guarantees are made that the handshake is indistinguishable from
that of a valid user.
[Emilia Käsper]
*) Configuration change; it's now possible to build dynamic engines
without having to build shared libraries and vice versa. This
only applies to the engines in engines/, those in crypto/engine/
will always be built into libcrypto (i.e. "static").
Building dynamic engines is enabled by default; to disable, use
the configuration option "disable-dynamic-engine".
The only requirements for building dynamic engines are the
presence of the DSO module and building with position independent
code, so they will also automatically be disabled if configuring
The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
are also taken away from openssl/opensslconf.h, as they are
irrelevant.
[Richard Levitte]
*) Configuration change; if there is a known flag to compile
position independent code, it will always be applied on the
libcrypto and libssl object files, and never on the application
object files. This means other libraries that use routines from
libcrypto / libssl can be made into shared libraries regardless
of how OpenSSL was configured.
If this isn't desirable, the configuration options "disable-pic"
or "no-pic" can be used to disable the use of PIC. This will
also disable building shared libraries and dynamic engines.
*) Removed JPAKE code. It was experimental and has no wide use.
[Rich Salz]
*) The INSTALL_PREFIX Makefile variable has been renamed to
DESTDIR. That makes for less confusion on what this variable
is for. Also, the configuration option --install_prefix is
removed.
[Richard Levitte]
*) Heartbeat for TLS has been removed and is disabled by default
for DTLS; configure with enable-heartbeats. Code that uses the
old #define's might need to be updated.
[Emilia Käsper, Rich Salz]
*) Rename REF_CHECK to REF_DEBUG.
[Rich Salz]
*) New "unified" build system
The "unified" build system is aimed to be a common system for all
platforms we support. With it comes new support for VMS.
This system builds supports building in a different directory tree
than the source tree. It produces one Makefile (for unix family
or lookalikes), or one descrip.mms (for VMS).
The source of information to make the Makefile / descrip.mms is
small files called 'build.info', holding the necessary
information for each directory with source to compile, and a
template in Configurations, like unix-Makefile.tmpl or
descrip.mms.tmpl.
We rely heavily on the perl module Text::Template.
[Richard Levitte]
*) Added support for auto-initialisation and de-initialisation of the library.
OpenSSL no longer requires explicit init or deinit routines to be called,
except in certain circumstances. See the OPENSSL_init_crypto() and
OPENSSL_init_ssl() man pages for further information.
*) The arguments to the DTLSv1_listen function have changed. Specifically the
"peer" argument is now expected to be a BIO_ADDR object.
*) Rewrite of BIO networking library. The BIO library lacked consistent
support of IPv6, and adding it required some more extensive
modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
which hold all types of addresses and chains of address information.
It also introduces a new API, with functions like BIO_socket,
BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
have been adapted accordingly.
[Richard Levitte]
*) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
the leading 0-byte.
[Emilia Käsper]
*) CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression
by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
using the SSL_CONF library to configure compression.
[Emilia Käsper]
*) The signature of the session callback configured with
SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
was explicitly marked as 'const unsigned char*' instead of
'unsigned char*'.
[Emilia Käsper]
*) Always DPURIFY. Remove the use of uninitialized memory in the
RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
[Emilia Käsper]
*) Removed many obsolete configuration items, including
DES_PTR, DES_RISC1, DES_RISC2, DES_INT
MD2_CHAR, MD2_INT, MD2_LONG
BF_PTR, BF_PTR2
IDEA_SHORT, IDEA_LONG
RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
[Rich Salz, with advice from Andy Polyakov]
*) Many BN internals have been moved to an internal header file.
[Rich Salz with help from Andy Polyakov]
Richard Levitte
committed
*) Configuration and writing out the results from it has changed.
Files such as Makefile include/openssl/opensslconf.h and are now
produced through general templates, such as Makefile.in and
crypto/opensslconf.h.in and some help from the perl module
Text::Template.
Also, the center of configuration information is no longer
Makefile. Instead, Configure produces a perl module in
configdata.pm which holds most of the config data (in the hash
table %config), the target data that comes from the target
configuration in one of the Configurations/*.conf files (in
%target).
[Richard Levitte]
*) To clarify their intended purposes, the Configure options
--prefix and --openssldir change their semantics, and become more
straightforward and less interdependent.
--prefix shall be used exclusively to give the location INSTALLTOP
where programs, scripts, libraries, include files and manuals are
going to be installed. The default is now /usr/local.
--openssldir shall be used exclusively to give the default
location OPENSSLDIR where certificates, private keys, CRLs are
managed. This is also where the default openssl.cnf gets
installed.
If the directory given with this option is a relative path, the
values of both the --prefix value and the --openssldir value will
be combined to become OPENSSLDIR.
The default for --openssldir is INSTALLTOP/ssl.
Anyone who uses --openssldir to specify where OpenSSL is to be
installed MUST change to use --prefix instead.
[Richard Levitte]
*) The GOST engine was out of date and therefore it has been removed. An up
to date GOST engine is now being maintained in an external repository.
Loading full blame...