Newer
Older
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
* The portions of the attached software ("Contribution") is developed by
* Nokia Corporation and is licensed pursuant to the OpenSSL open source
* license.
*
* The Contribution, originally written by Mika Kousa and Pasi Eronen of
* Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
* support (see RFC 4279) to OpenSSL.
*
* No patent licenses or other rights except those expressly stated in
* the OpenSSL open source license shall be deemed granted or received
* expressly, by implication, estoppel, or otherwise.
*
* No assurances are provided by Nokia that the Contribution does not
* infringe the patent or other intellectual property rights of any third
* party or that the license provides you with all the necessary rights
* to make use of the Contribution.
*
* THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
* ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
* SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
* OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
* OTHERWISE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <openssl/e_os2.h>
#ifdef OPENSSL_NO_STDIO
/* With IPv6, it looks like Digital has mixed up the proper order of
recursive header file inclusion, resulting in the compiler complaining
that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
is needed to have fileno() declared correctly... So let's define u_int */
#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
#define __U_INT
typedef unsigned int u_int;
#endif
#define USE_SOCKETS
#include "apps.h"
#include <openssl/x509.h>
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/pem.h>
#include <openssl/rand.h>
#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
#if defined(OPENSSL_SYS_BEOS_R5)
#include <fcntl.h>
#endif
#undef PROG
#define PROG s_client_main
/*#define SSL_HOST_NAME "www.netscape.com" */
/*#define SSL_HOST_NAME "193.118.187.102" */
#define SSL_HOST_NAME "localhost"
/*#define TEST_CERT "client.pem" */ /* no default cert. */
#undef BUFSIZZ
#define BUFSIZZ 1024*8
extern int verify_depth;
extern int verify_error;
#ifdef FIONBIO
static int c_nbio=0;
#endif
static int c_Pause=0;
static int c_debug=0;
static void sc_usage(void);
static void print_stuff(BIO *berr,SSL *con,int full);
static BIO *bio_c_out=NULL;
static int c_quiet=0;
static int c_ign_eof=0;
#ifndef OPENSSL_NO_PSK
/* Default PSK identity and key */
static char *psk_identity="Client_identity";
static char *psk_key=NULL; /* by default PSK is not used */
static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity,
unsigned int max_identity_len, unsigned char *psk,
unsigned int max_psk_len)
{
unsigned int psk_len = 0;
int ret;
BIGNUM *bn=NULL;
if (c_debug)
BIO_printf(bio_c_out, "psk_client_cb\n");
if (!hint)
{
/* no ServerKeyExchange message*/
if (c_debug)
BIO_printf(bio_c_out,"NULL received PSK identity hint, continuing anyway\n");
}
else if (c_debug)
BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint);
/* lookup PSK identity and PSK key based on the given identity hint here */
ret = BIO_snprintf(identity, max_identity_len, psk_identity);
if (ret < 0 || (unsigned int)ret > max_identity_len)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity, ret);
ret=BN_hex2bn(&bn, psk_key);
if (!ret)
{
BIO_printf(bio_err,"Could not convert PSK key '%s' to BIGNUM\n", psk_key);
if (bn)
BN_free(bn);
return 0;
}
if ((unsigned int)BN_num_bytes(bn) > max_psk_len)
{
BIO_printf(bio_err,"psk buffer of callback is too small (%d) for key (%d)\n",
max_psk_len, BN_num_bytes(bn));
BN_free(bn);
return 0;
}
psk_len=BN_bn2bin(bn, psk);
BN_free(bn);
if (psk_len == 0)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created PSK len=%d\n", psk_len);
return psk_len;
out_err:
if (c_debug)
BIO_printf(bio_err, "Error in PSK client callback\n");
return 0;
}
#endif
BIO_printf(bio_err,"usage: s_client args\n");
BIO_printf(bio_err,"\n");
BIO_printf(bio_err," -host host - use -connect instead\n");
BIO_printf(bio_err," -port port - use -connect instead\n");
BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
BIO_printf(bio_err," -verify arg - turn on peer certificate verification\n");
BIO_printf(bio_err," -cert arg - certificate file to use, PEM format assumed\n");
BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
BIO_printf(bio_err," -key arg - Private key file to use, in cert file if\n");
BIO_printf(bio_err," not specified but cert file is.\n");
BIO_printf(bio_err," -keyform arg - key format (PEM or DER) PEM default\n");
BIO_printf(bio_err," -pass arg - private key file pass phrase source\n");
BIO_printf(bio_err," -CApath arg - PEM format directory of CA's\n");
BIO_printf(bio_err," -CAfile arg - PEM format file of CA's\n");
BIO_printf(bio_err," -reconnect - Drop and re-make the connection with the same Session-ID\n");
BIO_printf(bio_err," -pause - sleep(1) after each read(2) and write(2) system call\n");
BIO_printf(bio_err," -showcerts - show all certificates in the chain\n");
BIO_printf(bio_err," -debug - extra output\n");
#ifdef WATT32
BIO_printf(bio_err," -wdebug - WATT-32 tcp debugging\n");
#endif
BIO_printf(bio_err," -msg - Show protocol messages\n");
BIO_printf(bio_err," -nbio_test - more ssl protocol testing\n");
BIO_printf(bio_err," -state - print the 'ssl' states\n");
#ifdef FIONBIO
BIO_printf(bio_err," -nbio - Run with non-blocking IO\n");
#endif
BIO_printf(bio_err," -crlf - convert LF from terminal into CRLF\n");
BIO_printf(bio_err," -quiet - no s_client output\n");
BIO_printf(bio_err," -ign_eof - ignore input eof (default when -quiet)\n");
#ifndef OPENSSL_NO_PSK
BIO_printf(bio_err," -psk_identity arg - PSK identity\n");
BIO_printf(bio_err," -psk arg - PSK in hex (without 0x)\n");
#endif
BIO_printf(bio_err," -ssl2 - just use SSLv2\n");
BIO_printf(bio_err," -ssl3 - just use SSLv3\n");
BIO_printf(bio_err," -tls1 - just use TLSv1\n");
BIO_printf(bio_err," -dtls1 - just use DTLSv1\n");
BIO_printf(bio_err," -mtu - set the MTU\n");
BIO_printf(bio_err," -no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
BIO_printf(bio_err," -bugs - Switch on all SSL implementation bug workarounds\n");
Lutz Jänicke
committed
BIO_printf(bio_err," -serverpref - Use server's cipher preferences (only SSLv2)\n");
BIO_printf(bio_err," -cipher - preferred cipher to use, use the 'openssl ciphers'\n");
BIO_printf(bio_err," command to see what is available\n");
BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
BIO_printf(bio_err," for those protocols that support it, where\n");
BIO_printf(bio_err," 'prot' defines which one to assume. Currently,\n");
Lutz Jänicke
committed
BIO_printf(bio_err," only \"smtp\" and \"pop3\" are supported.\n");
#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err," -engine id - Initialise and use the specified engine\n");
BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
#ifndef OPENSSL_NO_TLSEXT
BIO_printf(bio_err," -servername host - Set TLS extension servername in ClientHello\n");
#endif
#ifndef OPENSSL_NO_TLSEXT
/* This is a context that we pass to callbacks */
typedef struct tlsextctx_st {
BIO * biodebug;
int ack;
} tlsextctx;
static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
{
tlsextctx * p = (tlsextctx *) arg;
const char * hn= SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
if (SSL_get_servername_type(s) != -1)
p->ack = !SSL_session_reused(s) && hn != NULL;
else
BIO_printf(bio_err,"Can't use SSL_get_servername\n");
Ralf S. Engelschall
committed
int MAIN(int, char **);
X509_STORE *store = NULL;
int s,k,width,state=0;
char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
int cbuf_len,cbuf_off;
int sbuf_len,sbuf_off;
fd_set readfds,writefds;
short port=PORT;
int full_log=1;
char *host=SSL_HOST_NAME;
char *cert_file=NULL,*key_file=NULL;
int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
char *passarg = NULL, *pass = NULL;
X509 *cert = NULL;
EVP_PKEY *key = NULL;
char *CApath=NULL,*CAfile=NULL,*cipher=NULL;
int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0;
int crlf=0;
int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
SSL_CTX *ctx=NULL;
int ret=1,in_init=1,i,nbio_test=0;
Lutz Jänicke
committed
int starttls_proto = 0;
int prexit = 0, vflags = 0;
const SSL_METHOD *meth=NULL;
#ifndef OPENSSL_NO_ENGINE
char *engine_id=NULL;
ENGINE *e=NULL;
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
Dr. Stephen Henson
committed
struct timeval tv;
#if defined(OPENSSL_SYS_BEOS_R5)
int stdin_set = 0;
#endif
Dr. Stephen Henson
committed
#endif
#ifndef OPENSSL_NO_TLSEXT
char *servername = NULL;
tlsextctx tlsextcbp =
{NULL,0};
#endif
#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
meth=SSLv23_client_method();
#elif !defined(OPENSSL_NO_SSL3)
meth=SSLv3_client_method();
#elif !defined(OPENSSL_NO_SSL2)
meth=SSLv2_client_method();
#endif
apps_startup();
c_ign_eof=0;
if (bio_err == NULL)
bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
if (!load_config(bio_err, NULL))
goto end;
Richard Levitte
committed
if ( ((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
{
BIO_printf(bio_err,"out of memory\n");
goto end;
}
verify_depth=0;
verify_error=X509_V_OK;
#ifdef FIONBIO
c_nbio=0;
#endif
argc--;
argv++;
while (argc >= 1)
{
if (strcmp(*argv,"-host") == 0)
{
if (--argc < 1) goto bad;
host= *(++argv);
}
else if (strcmp(*argv,"-port") == 0)
{
if (--argc < 1) goto bad;
port=atoi(*(++argv));
if (port == 0) goto bad;
}
else if (strcmp(*argv,"-connect") == 0)
{
if (--argc < 1) goto bad;
if (!extract_host_port(*(++argv),&host,NULL,&port))
goto bad;
}
else if (strcmp(*argv,"-verify") == 0)
{
verify=SSL_VERIFY_PEER;
if (--argc < 1) goto bad;
verify_depth=atoi(*(++argv));
BIO_printf(bio_err,"verify depth is %d\n",verify_depth);
}
else if (strcmp(*argv,"-cert") == 0)
{
if (--argc < 1) goto bad;
cert_file= *(++argv);
}
else if (strcmp(*argv,"-certform") == 0)
{
if (--argc < 1) goto bad;
cert_format = str2fmt(*(++argv));
}
else if (strcmp(*argv,"-crl_check") == 0)
vflags |= X509_V_FLAG_CRL_CHECK;
else if (strcmp(*argv,"-crl_check_all") == 0)
vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
else if (strcmp(*argv,"-prexit") == 0)
prexit=1;
else if (strcmp(*argv,"-crlf") == 0)
crlf=1;
else if (strcmp(*argv,"-quiet") == 0)
{
c_ign_eof=1;
}
else if (strcmp(*argv,"-ign_eof") == 0)
c_ign_eof=1;
else if (strcmp(*argv,"-pause") == 0)
c_Pause=1;
else if (strcmp(*argv,"-debug") == 0)
c_debug=1;
#ifdef WATT32
else if (strcmp(*argv,"-wdebug") == 0)
dbug_init();
#endif
else if (strcmp(*argv,"-msg") == 0)
c_msg=1;
else if (strcmp(*argv,"-showcerts") == 0)
c_showcerts=1;
else if (strcmp(*argv,"-nbio_test") == 0)
nbio_test=1;
else if (strcmp(*argv,"-state") == 0)
state=1;
#ifndef OPENSSL_NO_PSK
else if (strcmp(*argv,"-psk_identity") == 0)
{
if (--argc < 1) goto bad;
psk_identity=*(++argv);
}
else if (strcmp(*argv,"-psk") == 0)
{
size_t j;
if (--argc < 1) goto bad;
psk_key=*(++argv);
for (j = 0; j < strlen(psk_key); j++)
{
if (isxdigit((int)psk_key[j]))
continue;
BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
goto bad;
}
}
#endif
#ifndef OPENSSL_NO_SSL2
else if (strcmp(*argv,"-ssl2") == 0)
meth=SSLv2_client_method();
#endif
#ifndef OPENSSL_NO_SSL3
else if (strcmp(*argv,"-ssl3") == 0)
meth=SSLv3_client_method();
#ifndef OPENSSL_NO_TLS1
else if (strcmp(*argv,"-tls1") == 0)
meth=TLSv1_client_method();
#endif
#ifndef OPENSSL_NO_DTLS1
else if (strcmp(*argv,"-dtls1") == 0)
{
meth=DTLSv1_client_method();
}
else if (strcmp(*argv,"-timeout") == 0)
enable_timeouts=1;
else if (strcmp(*argv,"-mtu") == 0)
{
if (--argc < 1) goto bad;
#endif
else if (strcmp(*argv,"-bugs") == 0)
bugs=1;
else if (strcmp(*argv,"-keyform") == 0)
{
if (--argc < 1) goto bad;
key_format = str2fmt(*(++argv));
}
else if (strcmp(*argv,"-pass") == 0)
{
if (--argc < 1) goto bad;
passarg = *(++argv);
}
else if (strcmp(*argv,"-key") == 0)
{
if (--argc < 1) goto bad;
key_file= *(++argv);
}
else if (strcmp(*argv,"-reconnect") == 0)
{
reconnect=5;
}
else if (strcmp(*argv,"-CApath") == 0)
{
if (--argc < 1) goto bad;
CApath= *(++argv);
}
else if (strcmp(*argv,"-CAfile") == 0)
{
if (--argc < 1) goto bad;
CAfile= *(++argv);
}
else if (strcmp(*argv,"-no_tls1") == 0)
off|=SSL_OP_NO_TLSv1;
else if (strcmp(*argv,"-no_ssl3") == 0)
off|=SSL_OP_NO_SSLv3;
else if (strcmp(*argv,"-no_ssl2") == 0)
off|=SSL_OP_NO_SSLv2;
else if (strcmp(*argv,"-no_comp") == 0)
{ off|=SSL_OP_NO_COMPRESSION; }
Lutz Jänicke
committed
else if (strcmp(*argv,"-serverpref") == 0)
off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
else if (strcmp(*argv,"-cipher") == 0)
{
if (--argc < 1) goto bad;
cipher= *(++argv);
}
#ifdef FIONBIO
else if (strcmp(*argv,"-nbio") == 0)
{ c_nbio=1; }
#endif
else if (strcmp(*argv,"-starttls") == 0)
{
if (--argc < 1) goto bad;
++argv;
if (strcmp(*argv,"smtp") == 0)
Lutz Jänicke
committed
starttls_proto = 1;
else if (strcmp(*argv,"pop3") == 0)
starttls_proto = 2;
else
goto bad;
}
#ifndef OPENSSL_NO_ENGINE
else if (strcmp(*argv,"-engine") == 0)
{
if (--argc < 1) goto bad;
engine_id = *(++argv);
}
else if (strcmp(*argv,"-rand") == 0)
{
if (--argc < 1) goto bad;
inrand= *(++argv);
}
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-servername") == 0)
{
if (--argc < 1) goto bad;
servername= *(++argv);
/* meth=TLSv1_client_method(); */
}
#endif
else
{
BIO_printf(bio_err,"unknown option %s\n",*argv);
badop=1;
break;
}
argc--;
argv++;
}
if (badop)
{
bad:
sc_usage();
goto end;
}
Richard Levitte
committed
OpenSSL_add_ssl_algorithms();
SSL_load_error_strings();
#ifndef OPENSSL_NO_ENGINE
Richard Levitte
committed
e = setup_engine(bio_err, engine_id, 1);
if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
{
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
if (key_file == NULL)
key_file = cert_file;
if (key_file)
key = load_key(bio_err, key_file, key_format, 0, pass, e,
"client certificate private key file");
if (!key)
{
ERR_print_errors(bio_err);
goto end;
}
if (cert_file)
cert = load_cert(bio_err,cert_file,cert_format,
NULL, e, "client certificate file");
if (!cert)
{
ERR_print_errors(bio_err);
goto end;
}
Richard Levitte
committed
if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
&& !RAND_status())
{
BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
}
if (inrand != NULL)
BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
app_RAND_load_files(inrand));
if (bio_c_out == NULL)
{
if (c_quiet && !c_debug && !c_msg)
{
bio_c_out=BIO_new(BIO_s_null());
}
else
{
if (bio_c_out == NULL)
bio_c_out=BIO_new_fp(stdout,BIO_NOCLOSE);
}
}
ctx=SSL_CTX_new(meth);
if (ctx == NULL)
{
ERR_print_errors(bio_err);
goto end;
}
#ifndef OPENSSL_NO_PSK
if (psk_key != NULL)
{
if (c_debug)
BIO_printf(bio_c_out, "PSK key given, setting client callback\n");
SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
}
#endif
if (bugs)
SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
else
SSL_CTX_set_options(ctx,off);
/* DTLS: partial reads end up discarding unread UDP bytes :-(
* Setting read ahead solves this problem.
*/
if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
if (cipher != NULL)
if(!SSL_CTX_set_cipher_list(ctx,cipher)) {
BIO_printf(bio_err,"error setting cipher list\n");
ERR_print_errors(bio_err);
goto end;
}
#if 0
else
SSL_CTX_set_cipher_list(ctx,getenv("SSL_CIPHER"));
#endif
SSL_CTX_set_verify(ctx,verify,verify_callback);
goto end;
if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) ||
(!SSL_CTX_set_default_verify_paths(ctx)))
{
/* BIO_printf(bio_err,"error setting default verify locations\n"); */
ERR_print_errors(bio_err);
store = SSL_CTX_get_cert_store(ctx);
X509_STORE_set_flags(store, vflags);
tlsextcbp.biodebug = bio_err;
SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
if (!SSL_set_tlsext_host_name(con,servername))
BIO_printf(bio_err,"Unable to set TLS servername extension.\n");
ERR_print_errors(bio_err);
goto end;
#ifndef OPENSSL_NO_KRB5
Richard Levitte
committed
if (con && (con->kssl_ctx = kssl_ctx_new()) != NULL)
{
kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVER, host);
}
#endif /* OPENSSL_NO_KRB5 */
/* SSL_set_cipher_list(con,"RC4-MD5"); */
BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
SHUTDOWN(s);
goto end;
}
BIO_printf(bio_c_out,"CONNECTED(%08X)\n",s);
#ifdef FIONBIO
if (c_nbio)
{
unsigned long l=1;
BIO_printf(bio_c_out,"turning on non blocking io\n");
if (BIO_socket_ioctl(s,FIONBIO,&l) < 0)
{
ERR_print_errors(bio_err);
goto end;
}
}
#endif
if (c_Pause & 0x01) con->debug=1;
if ( SSL_version(con) == DTLS1_VERSION)
{
struct timeval timeout;
sbio=BIO_new_dgram(s,BIO_NOCLOSE);
if (getsockname(s, &peer, (void *)&peerlen) < 0)
{
BIO_printf(bio_err, "getsockname:errno=%d\n",
get_last_socket_error());
SHUTDOWN(s);
goto end;
}
BIO_ctrl_set_connected(sbio, 1, &peer);
{
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_RCV_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_SND_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
}
}
else
/* want to do MTU discovery */
BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
}
else
sbio=BIO_new_socket(s,BIO_NOCLOSE);
if (nbio_test)
{
BIO *test;
test=BIO_new(BIO_f_nbio_test());
sbio=BIO_push(test,sbio);
}
if (c_debug)
{
con->debug=1;
BIO_set_callback(sbio,bio_dump_callback);
BIO_set_callback_arg(sbio,bio_c_out);
}
if (c_msg)
{
SSL_set_msg_callback(con, msg_cb);
SSL_set_msg_callback_arg(con, bio_c_out);
}
SSL_set_bio(con,sbio,sbio);
SSL_set_connect_state(con);
/* ok, lets connect */
width=SSL_get_fd(con)+1;
read_tty=1;
write_tty=0;
tty_on=0;
read_ssl=1;
write_ssl=1;
cbuf_len=0;
cbuf_off=0;
sbuf_len=0;
sbuf_off=0;
/* This is an ugly hack that does a lot of assumptions */
Lutz Jänicke
committed
if (starttls_proto == 1)
{
BIO_read(sbio,mbuf,BUFSIZZ);
BIO_printf(sbio,"STARTTLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
Lutz Jänicke
committed
if (starttls_proto == 2)
{
BIO_read(sbio,mbuf,BUFSIZZ);
BIO_printf(sbio,"STLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
for (;;)
{
FD_ZERO(&readfds);
FD_ZERO(&writefds);
if (SSL_in_init(con) && !SSL_total_renegotiations(con))
{
in_init=1;
tty_on=0;
}
else
{
tty_on=1;
if (in_init)
{
in_init=0;
BIO_printf(bio_c_out,"Server did %sacknowledge servername extension.\n",tlsextcbp.ack?"":"not ");
print_stuff(bio_c_out,con,full_log);
if (full_log > 0) full_log--;
Lutz Jänicke
committed
if (starttls_proto)
{
BIO_printf(bio_err,"%s",mbuf);
/* We don't need to know any more */
Lutz Jänicke
committed
starttls_proto = 0;
}
if (reconnect)
{
reconnect--;
BIO_printf(bio_c_out,"drop connection and then reconnect\n");
SSL_shutdown(con);
SSL_set_connect_state(con);
SHUTDOWN(SSL_get_fd(con));
goto re_start;
}
}
}
ssl_pending = read_ssl && SSL_pending(con);
if (!ssl_pending)
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined (OPENSSL_SYS_BEOS_R5)
if (tty_on)
{
if (read_tty) openssl_fdset(fileno(stdin),&readfds);
if (write_tty) openssl_fdset(fileno(stdout),&writefds);
}
if (read_ssl)
openssl_fdset(SSL_get_fd(con),&readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con),&writefds);
Dr. Stephen Henson
committed
#else
if(!tty_on || !write_tty) {
if (read_ssl)
openssl_fdset(SSL_get_fd(con),&readfds);
Dr. Stephen Henson
committed
if (write_ssl)
openssl_fdset(SSL_get_fd(con),&writefds);
Dr. Stephen Henson
committed
}
#endif
/* printf("mode tty(%d %d%d) ssl(%d%d)\n",
tty_on,read_tty,write_tty,read_ssl,write_ssl);*/
/* Note: under VMS with SOCKETSHR the second parameter
* is currently of type (int *) whereas under other
* systems it is (void *) if you don't have a cast it
* will choke the compiler: if you do have a cast then
* you can either go for (int *) or (void *).
*/
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
/* Under Windows/DOS we make the assumption that we can
Dr. Stephen Henson
committed
* always write to the tty: therefore if we need to
* write to the tty we just fall through. Otherwise
* we timeout the select every second and see if there
* are any keypresses. Note: this is a hack, in a proper
* Windows application we wouldn't do this.
*/
Dr. Stephen Henson
committed
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);