Makes curl connect to the given host+port instead of the host+port found
in the URL.

Previously, when a stream was closed with other than NGHTTP2_NO_ERROR
by RST_STREAM, underlying TCP connection was dropped.  This is
undesirable since there may be other streams multiplexed and they are
very much fine.  This change introduce new error code
CURLE_HTTP2_STREAM, which indicates stream error that only affects the
relevant stream, and connection should be kept open.  The existing
CURLE_HTTP2 means connection error in general.

Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663

As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.

As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.

So that we only do the extra typedefs in curl_memory.h when we really
need to and avoid double typedefs.

follow-up commit to 7218b52c

Thanks-to: Steve Holme

Supports HTTP/2 over clear TCP

- Optimize switching to HTTP/2 by removing calls to init and setup
before switching. Switching will eventually call setup and setup calls
init.

- Supports new version to “force” the use of HTTP/2 over clean TCP

- Add common line parameter “--http2-prior-knowledge” to the Curl
  command line tool.

The two options are almost the same, except in the case of OpenSSL:

CURLINFO_TLS_SESSION OpenSSL session internals is SSL_CTX *.

CURLINFO_TLS_SSL_PTR OpenSSL session internals is SSL *.

For backwards compatibility we couldn't modify CURLINFO_TLS_SESSION to
return an SSL pointer for OpenSSL.

Also, add support for the 'internals' member to point to SSL object for
the other backends axTLS, PolarSSL, Secure Channel, Secure Transport and
wolfSSL.

Bug: https://github.com/curl/curl/issues/234


Reported-by:  <dkjjr89@users.noreply.github.com>

Bug: https://curl.haxx.se/mail/lib-2015-09/0127.html
Reported-by: Michael König

Some TFTP server implementations ignore the "TFTP Option extension"
(RFC 1782-1784, 2347-2349), or implement it in a flawed way, causing
problems with libcurl. Another switch for curl_easy_setopt
"CURLOPT_TFTP_NO_OPTIONS" is introduced which prevents libcurl from
sending TFTP option requests to a server, avoiding many problems caused
by faulty implementations.

Bug: https://github.com/curl/curl/issues/481

... and stick to 1.1 for HTTP. This is in line with what browsers do and
should have very little risk.

The name of the header guard in lwIP's <lwip/opt.h> has changed from
'__LWIP_OPT_H__' to 'LWIP_HDR_OPT_H' (bug #35874 in May 2015).

Other fixes:

- In curl_setup.h, the problem with an old PSDK doesn't apply if lwIP is
used.

- In memdebug.h, the 'socket' should be undefined first due to lwIP's
lwip_socket() macro.

- In curl_addrinfo.c lwIP's getaddrinfo() + freeaddrinfo() macros need
special handling because they were undef'ed in memdebug.h.

- In select.c we can't use preprocessor conditionals inside select if
MSVC and select is a macro, as it is with lwIP.

http://curl.haxx.se/mail/lib-2015-12/0023.html
http://curl.haxx.se/mail/lib-2015-12/0024.html

As an alias for OBJECTPOINT. Provided to allow us to grep for all string
options easier.

Closes #425

Fixes a name space pollution at the cost of programs using one of these
defines will no longer compile. However, the vast majority of libcurl
programs that do multipart formposts use curl_formadd() to build this
list.

Closes #506

CURLOPT_STREAM_DEPENDS

CURLOPT_STREAM_DEPENDS_E

CURLOPT_STREAM_PRIORITY

closes #496

This patch addresses known bug #76, where on 64-bit Windows SOCKET is 64
bits wide, but long is only 32, making CURLINFO_LASTSOCKET unreliable.

Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>

- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.

- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.

In the case of schemeless URLs libcurl will behave in this way:

When the option is used libcurl will use the supplied default.

When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.

New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.

Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.

Bug: https://github.com/bagder/curl/issues/264


Reported-by: zenden2k <zenden2k@gmail.com>

The protocol is named "HTTP/2" after all. It is an alias for the
existing CURL_HTTP_VERSION_2_0 enum.

By setting this option to 1 libcurl will wait for a connection to reveal
if it is possible to pipeline/multiplex on before it continues.

* Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME.
* Add new curl options, --proxy-service-name and --service-name.

--path-as-is is the command line option

Added docs in curl.1 and CURLOPT_PATH_AS_IS.3

Added test in test 1241

This option can be used to enable/disable TLS False Start defined in the RFC
draft-bmoeller-tls-falsestart.

This option can be used to enable/disable certificate status verification using
the "Certificate Status Request" TLS extension defined in RFC6066 section 8.

This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the
certificate status verification fails, and the Curl_ssl_cert_status_request()
function, used to check whether the SSL backend supports the status_request
extension.

For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.

Use Unix when generically writing about Unix based systems as UNIX is
the trademark and should only be used in a particular product's name.

It returns error for >= 400 HTTP responses.

Bug: https://github.com/bagder/curl/pull/129

The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.

One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).

This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.

A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).

A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.

 [0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
 [1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
 [2]: http://sourceforge.net/p/curl/feature-requests/53/
 [3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
 [4]: https://github.com/Soulou/curl-unix-socket



Signed-off-by: Peter Wu <peter@lekensteyn.nl>

Added the necessary protocol and port definitions in order to support
SMB/CIFS.

As the list has gotten a little messy and hard to read, especially with
the introduction of deprecated items, aligned the values and comments
into clean columns and reworked some of the comments in the process.

Support for Kerberos V4 was removed in v7.33.0.

Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).

Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().

Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der