As an alias for OBJECTPOINT. Provided to allow us to grep for all string
options easier.

Closes #425

Fixes a name space pollution at the cost of programs using one of these
defines will no longer compile. However, the vast majority of libcurl
programs that do multipart formposts use curl_formadd() to build this
list.

Closes #506

CURLOPT_STREAM_DEPENDS

CURLOPT_STREAM_DEPENDS_E

CURLOPT_STREAM_PRIORITY

closes #496

This patch addresses known bug #76, where on 64-bit Windows SOCKET is 64
bits wide, but long is only 32, making CURLINFO_LASTSOCKET unreliable.

Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>

- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.

- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.

In the case of schemeless URLs libcurl will behave in this way:

When the option is used libcurl will use the supplied default.

When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.

New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.

Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.

Bug: https://github.com/bagder/curl/issues/264


Reported-by: zenden2k <zenden2k@gmail.com>

The protocol is named "HTTP/2" after all. It is an alias for the
existing CURL_HTTP_VERSION_2_0 enum.

By setting this option to 1 libcurl will wait for a connection to reveal
if it is possible to pipeline/multiplex on before it continues.

* Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME.
* Add new curl options, --proxy-service-name and --service-name.

--path-as-is is the command line option

Added docs in curl.1 and CURLOPT_PATH_AS_IS.3

Added test in test 1241

This option can be used to enable/disable TLS False Start defined in the RFC
draft-bmoeller-tls-falsestart.

This option can be used to enable/disable certificate status verification using
the "Certificate Status Request" TLS extension defined in RFC6066 section 8.

This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the
certificate status verification fails, and the Curl_ssl_cert_status_request()
function, used to check whether the SSL backend supports the status_request
extension.

For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.

Use Unix when generically writing about Unix based systems as UNIX is
the trademark and should only be used in a particular product's name.

It returns error for >= 400 HTTP responses.

Bug: https://github.com/bagder/curl/pull/129

The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.

One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).

This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.

A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).

A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.

 [0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
 [1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
 [2]: http://sourceforge.net/p/curl/feature-requests/53/
 [3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
 [4]: https://github.com/Soulou/curl-unix-socket



Signed-off-by: Peter Wu <peter@lekensteyn.nl>

Added the necessary protocol and port definitions in order to support
SMB/CIFS.

As the list has gotten a little messy and hard to read, especially with
the introduction of deprecated items, aligned the values and comments
into clean columns and reworked some of the comments in the process.

Support for Kerberos V4 was removed in v7.33.0.

Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).

Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().

Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der

Each backend now defines CURL_SSL_BACKEND accordingly. Added the *AXTLS
one which was missing previously.

Removing defines, even obsolete ones that haven't been used for a very
long time, still break a lot of applications.

Bug: https://github.com/bagder/curl/pull/106

1 - fixes the warnings when built without http2 support

2 - adds CURLE_HTTP2, a new error code for errors detected by nghttp2
basically when they are about http2 specific things.

- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
  is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
  CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'

This is consistent with the existing obsolete error code naming
convention.

... from the CINIT() enum

We now provide the "real" names in the CINIT() macro setup for CURLOPT_*
symbols, and we provide backwards compatibility defines for the old
symbols as defines instead of vice versa.

This allows us to better use the CINIT() list to check for existing and
current option names.

Modified the logic so that CURLOPT_HEADEROPT now controls if PROXYHEADER
is actually used or not.

Includes docs and new test cases: 1525, 1526 and 1527

Co-written-by: Vijay Panghal

Replaced the #define CURL_TIMEOUT_EXPECT_100 in transfer.c with the
CURLOPT_EXPECT_100_TIMEOUT_MS option to make the timeout configurable.

when using --http2 one can now selectively disable NPN or ALPN with
--no-alpn and --no-npn. for now honored with NSS only.

TODO: honor this option with GnuTLS and OpenSSL

To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.

Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).

Bug: http://curl.haxx.se/bug/view.cgi?id=1311


Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>

curl.h should also include <sys/select.h> on OpenBSD to reliably
pull in select().  Typically, including <sys/time.h> will be enough,
but not if strict standards-compliance is requested (e.g. by defining
_XOPEN_SOURCE).