PR#3790

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.

*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.

Thanks to Julien Kauffmann for reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

PR#3789

Reviewed-by: Rich Salz <rsalz@openssl.org>

No need for here documents, just use "yes" or </dev/null.
No need for "|| exit 1" clauses, just use "set -e".

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix commit 30f54ad2

 which used
non-portable syntax for checking exit status.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix a "&" that should have been "!" when processing read_ahead.

RT#3793

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Removed commented-out tests

Standardize on doing
        cmd ... || exit 1
instead of
        cmd ...
        if [ $? != 0] ; then
           exit 1
        fi
where that if statement has ben one, three, or four lines, variously.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Since source reformat, we ended up with some error reason string
definitions that spanned two lines.  That in itself is fine, but we
sometimes edited them to provide better strings than what could be
automatically determined from the reason macro, for example:

    {ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
     "Peer haven't sent GOST certificate, required for selected ciphersuite"},

However, mkerr.pl didn't treat those two-line definitions right, and
they ended up being retranslated to whatever the macro name would
indicate, for example:

    {ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
     "No gost certificate sent by peer"},

Clearly not what we wanted.  This change fixes this problem.

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove CA.sh script and use CA.pl for testing, etc.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Output a consistent "start" marker for each test.
Remove "2>/dev/null" from Makefile command lines.
Add OPENSSL_CONFIG=/dev/null for places where it's needed, in
order to suppress a warning message from the openssl CLI.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this

e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
      [-Wshadow]
    seqnum = BSWAP8(blocks[0].q[0]);
             ^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
                            ^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
    size_t ret = 0;
           ^

Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).

Reviewed-by: Rich Salz <rsalz@openssl.org>

We use GNU statement expressions in crypto/md32_common.h, surrounded
by checks that GNU C is indeed used to compile.  It seems that clang,
at least on Linux, pretends to be GNU C, therefore finds the statement
expressions and then warns about them.

The solution is to have clang be quiet about it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
      declaration [-Wempty-translation-unit]
      ^
1 warning generated.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Complete reimplementation of d2i_SSL_SESSION and i2d_SSL_SESSION using
new ASN.1 code and eliminating use of old ASN.1 macros.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Print "supported compression methods" all on one line.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.

[Update even SHA results for latest Cortex-A53.]

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

A bit of cleanup was forgotten.

Reviewed-by: Tim Hudson <tjh@openssl.org>

This engine is for VMS only, and isn't really part of the core OpenSSL
but rather a side project of its own that just happens to have tagged
along for a long time.  The reasons why it has remained within the
OpenSSL source are long lost in history, and there not being any real
reason for it to remain here, it's time for it to move out.

This side project will appear as a project in its own right, the
location of which will be announced later on.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Rewrite ASN1_TYPE_set_int_octetstring and ASN1_TYPE_get_int_octetstring
to use the new ASN.1 code instead of the old macros.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

GitConfigure:   no more 'no-symlinks'

util/bat.sh, util/mk1mf.pl, util/pl/VC-32.pl, util/pl/unix.pl:
- Remove all uses of EXHEADER.
  That includes removing the use if INC_D and INCO_D.
- Replace the check for TEST with a check for [A-Z0-9_]*TEST.

Reviewed-by: Rich Salz <rsalz@openssl.org>

With no more symlinks, there's no need for those variables, or the links
target.  This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.

Also, removed METHTEST from test/Makefile.  It looks like an old test that's
forgotten...

Reviewed-by: Rich Salz <rsalz@openssl.org>

Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.

Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.

Originally-by: Geoff Thorpe <geoff@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

RFC5915 requires the use of the I2OSP primitive as defined in RFC3447
for storing an EC Private Key. This converts the private key into an
OCTETSTRING and retains any leading zeros. This commit ensures that those
leading zeros are present if required.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Fix up various things that were missed during the record layer work. All
instances where we are breaking the encapsulation rules.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The "clean" target in libssl has been updated to handle the new record
layer sub-directory.

Reviewed-by: Richard Levitte <levitte@openssl.org>

When building on Unix, there are times when the 'EX_LIB' MINFO variable
contains valuable information.  Make sure to take care of it.

fixrules in util/pl/unix.pl was previously changed with a simpler fix of
rules, with a comment claiming that's compatible with -j.  Unfortunately,
this breaks multiline rules and doesn't change anything for single line
rules.  While at it, do not prefix pure echo lines with a 'cd $(TEST_D) &&',
as that's rather silly.

Reviewed-by: Andy Polyakov <appro@openssl.org>