Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

This gets rid of the BEGINRAW..ENDRAW sections in engines/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This gets rid of the BEGINRAW..ENDRAW sections in crypto/bn/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Should it be needed because the recipes within a RAW section might
clash with those generated by Configure, it's possible to tell it
not to generate them with the use of OVERRIDES, for example:

    SOURCE[libfoo]=foo.c bar.c

    OVERRIDES=bar.o
    BEGINRAW[Makefile(unix)]
    bar.o: bar.c
        $(CC) $(CFLAGS) -DSPECIAL -c -o $@ $<
    ENDRAW[Makefile(unix)]

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

In some cases, one might want to generate some source files from
others, that's done as follows:

    GENERATE[foo.s]=asm/something.pl $(CFLAGS)
    GENERATE[bar.s]=asm/bar.S

The value of each GENERATE line is a command line or part of it.
Configure places no rules on the command line, except the the first
item muct be the generator file.  It is, however, entirely up to the
build file template to define exactly how those command lines should
be handled, how the output is captured and so on.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add the ASYNC_is_capable() function and use it in speed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Swap the use of CRYPTO_LOCK_INIT in the init code to use the new threading
API mechanism for locking.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The init code was using its own thread local code. Now we have a central
API for it we should use that instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The init code was using its own "once" implementation. Now that we have
the new thread API we should use that instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make PKCS8_PRIV_KEY_INFO opaque. Several accessor functions already exist
for this structure. Two new ones were added to handle attributes.

The old handling of broken formats has been removed and the corresponding
structures simplified.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Move RSA struct in the job local struct.
The change is applied also to other crypto operations (e.g. DSA) to
make things consistent.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Summary of the changes:

* Move the calls to the crypto operations inside wrapper functions.
  This is required because ASYNC_start_job takes a function as an argument.

* Add new function run_benchmark() that manages the jobs for all the operations.
  In the POSIX case it uses a select() to receive the events from the engine
  and resume the jobs that are paused, while in the WIN case it uses PeekNamedPipe()

* Add new option argument async_jobs to enable and specify the number of async jobs

Example:
  openssl speed -engine dasync -elapsed -async_jobs 32 rsa2048

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

 - Always prefer forward-secure handshakes.
 - Consistently order ECDSA above RSA.
 - Next, always prefer AEADs to non-AEADs, irrespective of strength.
 - Within AEADs, prefer GCM > CHACHA > CCM for a given strength.
 - Prefer TLS v1.2 ciphers to legacy ciphers.
 - Remove rarely used DSS, IDEA, SEED, CAMELLIA, CCM from the default
   list to reduce ClientHello bloat.

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT#4373

Reviewed-by: Richard Levitte <levitte@openssl.org>

Some OSes, *cough*-dows, insist on stack being "wired" to
physical memory in strictly sequential manner, i.e. if stack
allocation spans two pages, then reference to farmost one can
be punishable by SEGV. But page walking can do good even on
other OSes, because it guarantees that villain thread hits
the guard page before it can make damage to innocent one...

Reviewed-by: Rich Salz <rsalz@openssl.org>

"no-pic" builds have in fact been green (and reasonably fast), so
restore them while we figure out why tests without "no-pic" hang.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Not all assemblers of "gas" flavour handle binary constants, e.g.
seasoned MacOS Xcode doesn't, so give them a hand.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

The af_alg engine and associated test were creating warnings when compiled
with clang. This fixes it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The new afalg test should have a copyright date of 2016. Also an
incorrect buffer was being sent to EVP_CipherFinal_ex when
decrypting.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

The 0x00010000L OPENSSL_INIT flag appeared twice.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Misc afalg build fixes as suggested by Richard Levitte for the latest
Configure changes.

Reviewed-by: Richard Levitte <levitte@openssl.org>

1. Cleaned up eventfd handling
2. Reworked socket setup code to allow other algorithms to be added in
   future
3. Fixed compile errors for static build
4. Added error to error stack in all cases of ALG_PERR/ALG_ERR
5. Called afalg_aes_128_cbc() from bind() to avoid race conditions
6. Used MAX_INFLIGHT define in io_getevents system call
7. Coding style fixes

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

- Remove Win builds (temporarily). They're slow, allowed to fail,
  and therefore not useful as they are.
- Make the --unified part of the matrix build-only. (This can be
  swapped if --unified becomes the default)
- Only build 'no-engine' once, don't run any tests, but don't allow it
  to fail.

Reviewed-by: Richard Levitte <levitte@openssl.org>

- Remove no-asm. We've got to cut something, and this is at least
  partially covered by the sanitizer builds.
- Remove enable-crypto-mdebug from sanitizer
  builds. enable-crypto-mdebug has been shown to catch some static
  initialization bugs that the standard leak sanitizer can't so
  perhaps it has _some_ value; but we shouldn't let the two compete.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

When object files with common block symbols are added to static
libraries on Darwin, those symbols are invisible to the linker that
tries to use them.  Our solution was to use -fno-common when compiling
C source.

Unfortunately, there is assembler code that defines OPENSSL_ia32cap_P
as a common block symbol, unconditionally, and in some cases, there is
no other definition.  -fno-common doesn't help in this case.

However, 'ranlib -c' adds common block symbols to the index of the
static library, which makes them visible to the linker using it, and
that solves the problem we've seen.

The common conclusion is, either use -fno-common or ranlib -c on
Darwin.  Since we have common block symbols unconditionally, choosing
the method for our source is easy.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>