PR#3574

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

In keygen, return KEY_SIZE_TOO_SMALL not INVALID_KEYBITS.

** I also increased the minimum from 256 to 512, which is now
documented in CHANGES file. **

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix CONF_load_modules to CONF_modules_load.
Document that it calls exit.
Advise against using it now.
Add an error print to stderr.

Reviewed-by: Matt Caswell <matt@openssl.org>

the session's version (server).

See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

ECDH_compute_key is silently ignored and the KDF is run on duff data

Thanks to github user tomykaira for the suggested fix.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.

(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)

Thanks to Joeri de Ruiter for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>

The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.

An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.

Reviewed-by: Matt Caswell <matt@openssl.org>

The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.

An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.

Reviewed-by: Matt Caswell <matt@openssl.org>

The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67

Reviewed-by: Matt Caswell <matt@openssl.org>

This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

If no keyfile has been specified use the certificate file instead.

Fix typo: we need to check the chain is not NULL, not the chain file.
Reviewed-by: Matt Caswell <matt@openssl.org>

(cherry picked from commit 786370b1)

When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.

When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.

We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Don't send or parse any extensions other than RI (which is needed
to handle secure renegotation) for SSLv3.
Reviewed-by: Matt Caswell <matt@openssl.org>

The supported signature algorithms extension needs to be processed before
the certificate to use is decided and before a cipher is selected (as the
set of shared signature algorithms supported may impact the choice).
Reviewed-by: Matt Caswell <matt@openssl.org>

(cherry picked from commit 56e8dc54)

Conflicts:
	ssl/ssl.h
	ssl/ssl_err.c

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Don't attempt to access msg structure if recvmsg returns an error.

PR#3483
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Change-Id: I626d751f19f24df6b967c17498d6189cc0acb96c
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

This is the only Makefile without SRC defined. This change enables a
standard Makefile include directive to cover crypto/jpake/*.d files.

This was automatically applied by AddSrcVarIfNeeded() in:
https://code.google.com/p/mike-bland/source/browse/openssl/update_makefiles.py



Change-Id: I030204a1bc873b5de5b06c8ddc0b94bb224c6650
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

These correspond to targets of the same name in test/Makefile that clash when
using the single-makefile build method using GitConfigure and GitMake.

Change-Id: If7e900c75f4341b446608b6916a3d76f202026ea
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Before this change, variables for which a '=' appeared in the assignment would
be parsed as the entire string up until the final '='. For example:

  BUILD_CMD=shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \

would result in the variable name "BUILD_CMD=shlib_target". This doesn't
appear to harm the current generation of MINFO, but creates problems for other
Makefile-related work I'm attempting.

Change-Id: I1f3a606d67fd5464bb459e8f36c23b3e967b77e1
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

These are based on debug-ben-debug-64-clang and is intended to produce
consistent settings for folks involved in the unit testing effort detailed at:

http://wiki.openssl.org/index.php/Unit_Testing

-fsanitize has been removed from the set of clang flags for now. Apparently
clang 3.1, which ships with FreeBSD 9.1, completely ignores -fsanitize. Clang
3.3, which ships with FreeBSD 9.2, compiles with it, but fails to link due to
the absence of libasan:

http://lists.freebsd.org/pipermail/freebsd-hackers/2013-December/043995.html
https://www.mail-archive.com/cfe-commits@cs.uiuc.edu/msg92260.html
http://reviews.llvm.org/D2644



We need -Wno-error=unused-const-variable because of this error:
.../crypto/ec/ec_lib.c:74:19: error: unused variable 'EC_version' [-Werror,-Wunused-const-variable]
static const char EC_version[] = "EC" OPENSSL_VERSION_PTEXT;

Change-Id: I2cba53537137186114c083049ea1233550a741f9
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

This fixes the errors when trying to assemble .s files using GitMake on OS X.

Change-Id: I2221f558619302d22e0c57d7203173d634155678
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

cscope.out is generated by cscope as described in:
http://wiki.openssl.org/index.php/Testing_and_Development_Tools_and_Tips



.d files are compiler-generated Makefile dependency files (e.g. using
'gcc -MMD -MP foo.c').

Change-Id: I2338858a6b6ee0527837d10a8b55cff1689023fd
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Print out more details of the conection in ssltest specifically:
server certificate curve name for EC, server temporary key (if any)
and peer signing digest.
Reviewed-by: Matt Caswell <matt@openssl.org>

Add command line support for SSL_CONF: server side arguments are
prefixed by -s_ (e.g. -s_no_ssl3) and client side with -c_.
Reviewed-by: Matt Caswell <matt@openssl.org>

If the hash or public key algorithm is "undef" the signature type
will receive special handling and shouldn't be included in the
cross reference table.
Reviewed-by: Tim Hudson <tjh@openssl.org>

Out is the buffer which needs to contain at least inl + cipher_block_size - 1 bytes. Outl
is just an int*.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

PR#3535

Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

This doesn't really fix the datarace but changes it so it can only happens
once. This isn't really a problem since we always just set it to the same
value. We now just stop writing it after the first time.

PR3584, https://bugs.debian.org/534534



Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

PR: 3474
Reviewed-by: Kurt Roeckx <kurt@openssl.org>