Newer
Older
Ralf S. Engelschall
committed
_______________
Changes between 1.0.2g and 1.1.0 [xx XXX xxxx]
*) Removed the mk1mf build scripts.
[Richard Levitte]
*) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
it is always safe to #include a header now.
[Rich Salz]
*) Removed the aged BC-32 config and all its supporting scripts
[Richard Levitte]
*) Added support for "pipelining". Ciphers that have the
EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
encryptions/decryptions simultaneously. There are currently no built-in
ciphers with this property but the expectation is that engines will be able
to offer it to significantly improve throughput. Support has been extended
into libssl so that multiple records for a single connection can be
processed in one go (for >=TLS 1.1).
[Matt Caswell]
*) Added the AFALG engine. This is an async capable engine which is able to
offload work to the Linux kernel. In this initial version it only supports
AES128-CBC. The kernel must be version 4.1.0 or greater.
[Catriona Lucey]
*) OpenSSL now uses a new threading API. It is no longer necessary to
set locking callbacks to use OpenSSL in a multi-threaded environment. There
are two supported threading models: pthreads and windows threads. It is
also possible to configure OpenSSL at compile time for "no-threads". The
old threading API should no longer be used. The functions have been
replaced with "no-op" compatibility macros.
[Alessandro Ghedini, Matt Caswell]
*) Modify behavior of ALPN to invoke callback after SNI/servername
callback, such that updates to the SSL_CTX affect ALPN.
[Todd Short]
*) Add SSL_CIPHER queries for authentication and key-exchange.
[Todd Short]
*) Changes to the DEFAULT cipherlist:
- Prefer (EC)DHE handshakes over plain RSA.
- Prefer AEAD ciphers over legacy ciphers.
- Prefer ECDSA over RSA when both certificates are available.
- Prefer TLSv1.2 ciphers/PRF.
- Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
default cipherlist.
[Emilia Käsper]
*) Change the ECC default curve list to be this, in order: x25519,
secp256r1, secp521r1, secp384r1.
[Rich Salz]
*) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
disabled by default. They can be re-enabled using the
enable-weak-ssl-ciphers option to Configure.
[Matt Caswell]
*) If the server has ALPN configured, but supports no protocols that the
client advertises, send a fatal "no_application_protocol" alert.
This behaviour is SHALL in RFC 7301, though it isn't universally
implemented by other servers.
[Emilia Käsper]
*) Add X25519 support.
Integrate support for X25519 into EC library. This includes support
for public and private key encoding using the format documented in
draft-josefsson-pkix-newcurves-01: specifically X25519 uses the
OID from that draft, encodes public keys using little endian
format in the ECPoint structure and private keys using
little endian form in the privateKey field of the ECPrivateKey
structure. TLS support complies with draft-ietf-tls-rfc4492bis-06
and uses X25519(29).
Note: the current version supports key generation, public and
private key encoding and ECDH key agreement using the EC API.
Low level point operations such as EC_POINT_add(), EC_POINT_mul()
are NOT supported.
[Steve Henson]
*) Deprecate SRP_VBASE_get_by_user.
SRP_VBASE_get_by_user had inconsistent memory management behaviour.
In order to fix an unavoidable memory leak (CVE-2016-0798),
SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
seed, even if the seed is configured.
Users should use SRP_VBASE_get1_by_user instead. Note that in
SRP_VBASE_get1_by_user, caller must free the returned value. Note
also that even though configuring the SRP seed attempts to hide
invalid usernames by continuing the handshake with fake
credentials, this behaviour is not constant time and no strong
guarantees are made that the handshake is indistinguishable from
that of a valid user.
[Emilia Käsper]
*) Configuration change; it's now possible to build dynamic engines
without having to build shared libraries and vice versa. This
only applies to the engines in engines/, those in crypto/engine/
will always be built into libcrypto (i.e. "static").
Building dynamic engines is enabled by default; to disable, use
the configuration option "disable-dynamic-engine".
The only requirements for building dynamic engines are the
presence of the DSO module and building with position independent
code, so they will also automatically be disabled if configuring
The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
are also taken away from openssl/opensslconf.h, as they are
irrelevant.
[Richard Levitte]
*) Configuration change; if there is a known flag to compile
position independent code, it will always be applied on the
libcrypto and libssl object files, and never on the application
object files. This means other libraries that use routines from
libcrypto / libssl can be made into shared libraries regardless
of how OpenSSL was configured.
If this isn't desirable, the configuration options "disable-pic"
or "no-pic" can be used to disable the use of PIC. This will
also disable building shared libraries and dynamic engines.
*) Removed JPAKE code. It was experimental and has no wide use.
[Rich Salz]
*) The INSTALL_PREFIX Makefile variable has been renamed to
DESTDIR. That makes for less confusion on what this variable
is for. Also, the configuration option --install_prefix is
removed.
[Richard Levitte]
*) Heartbeat for TLS has been removed and is disabled by default
for DTLS; configure with enable-heartbeats. Code that uses the
old #define's might need to be updated.
[Emilia Käsper, Rich Salz]
*) Rename REF_CHECK to REF_DEBUG.
[Rich Salz]
*) New "unified" build system
The "unified" build system is aimed to be a common system for all
platforms we support. With it comes new support for VMS.
This system builds supports building in a different directory tree
than the source tree. It produces one Makefile (for unix family
or lookalikes), or one descrip.mms (for VMS).
The source of information to make the Makefile / descrip.mms is
small files called 'build.info', holding the necessary
information for each directory with source to compile, and a
template in Configurations, like unix-Makefile.tmpl or
descrip.mms.tmpl.
We rely heavily on the perl module Text::Template.
[Richard Levitte]
*) Added support for auto-initialisation and de-initialisation of the library.
OpenSSL no longer requires explicit init or deinit routines to be called,
except in certain circumstances. See the OPENSSL_init_crypto() and
OPENSSL_init_ssl() man pages for further information.
*) The arguments to the DTLSv1_listen function have changed. Specifically the
"peer" argument is now expected to be a BIO_ADDR object.
*) Rewrite of BIO networking library. The BIO library lacked consistent
support of IPv6, and adding it required some more extensive
modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
which hold all types of addresses and chains of address information.
It also introduces a new API, with functions like BIO_socket,
BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
have been adapted accordingly.
[Richard Levitte]
*) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
the leading 0-byte.
[Emilia Käsper]
*) CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression
by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
using the SSL_CONF library to configure compression.
[Emilia Käsper]
*) The signature of the session callback configured with
SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
was explicitly marked as 'const unsigned char*' instead of
'unsigned char*'.
[Emilia Käsper]
*) Always DPURIFY. Remove the use of uninitialized memory in the
RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
[Emilia Käsper]
*) Removed many obsolete configuration items, including
DES_PTR, DES_RISC1, DES_RISC2, DES_INT
MD2_CHAR, MD2_INT, MD2_LONG
BF_PTR, BF_PTR2
IDEA_SHORT, IDEA_LONG
RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
[Rich Salz, with advice from Andy Polyakov]
*) Many BN internals have been moved to an internal header file.
[Rich Salz with help from Andy Polyakov]
Richard Levitte
committed
*) Configuration and writing out the results from it has changed.
Files such as Makefile include/openssl/opensslconf.h and are now
produced through general templates, such as Makefile.in and
crypto/opensslconf.h.in and some help from the perl module
Text::Template.
Also, the center of configuration information is no longer
Makefile. Instead, Configure produces a perl module in
configdata.pm which holds most of the config data (in the hash
table %config), the target data that comes from the target
configuration in one of the Configurations/*.conf files (in
%target).
[Richard Levitte]
*) To clarify their intended purposes, the Configure options
--prefix and --openssldir change their semantics, and become more
straightforward and less interdependent.
--prefix shall be used exclusively to give the location INSTALLTOP
where programs, scripts, libraries, include files and manuals are
going to be installed. The default is now /usr/local.
--openssldir shall be used exclusively to give the default
location OPENSSLDIR where certificates, private keys, CRLs are
managed. This is also where the default openssl.cnf gets
installed.
If the directory given with this option is a relative path, the
values of both the --prefix value and the --openssldir value will
be combined to become OPENSSLDIR.
The default for --openssldir is INSTALLTOP/ssl.
Anyone who uses --openssldir to specify where OpenSSL is to be
installed MUST change to use --prefix instead.
[Richard Levitte]
*) The GOST engine was out of date and therefore it has been removed. An up
to date GOST engine is now being maintained in an external repository.
See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
support for GOST ciphersuites (these are only activated if a GOST engine
is present).
[Matt Caswell]
*) EGD is no longer supported by default; use enable-egd when
configuring.
*) The distribution now has Makefile.in files, which are used to
create Makefile's when Configure is run. *Configure must be run
before trying to build now.*
[Rich Salz]
*) The return value for SSL_CIPHER_description() for error conditions
has changed.
[Rich Salz]
*) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
Obtaining and performing DNSSEC validation of TLSA records is
the application's responsibility. The application provides
the TLSA records of its choice to OpenSSL, and these are then
used to authenticate the peer.
The TLSA records need not even come from DNS. They can, for
example, be used to implement local end-entity certificate or
trust-anchor "pinning", where the "pin" data takes the form
of TLSA records, which can augment or replace verification
based on the usual WebPKI public certification authorities.
[Viktor Dukhovni]
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
*) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
continues to support deprecated interfaces in default builds.
However, applications are strongly advised to compile their
source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
the declarations of all interfaces deprecated in 0.9.8, 1.0.0
or the 1.1.0 releases.
In environments in which all applications have been ported to
not use any deprecated interfaces OpenSSL's Configure script
should be used with the --api=1.1.0 option to entirely remove
support for the deprecated features from the library and
unconditionally disable them in the installed headers.
Essentially the same effect can be achieved with the "no-deprecated"
argument to Configure, except that this will always restrict
the build to just the latest API, rather than a fixed API
version.
As applications are ported to future revisions of the API,
they should update their compile-time OPENSSL_API_COMPAT define
accordingly, but in most cases should be able to continue to
compile with later releases.
The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
0x10000000L and 0x00908000L, respectively. However those
versions did not support the OPENSSL_API_COMPAT feature, and
so applications are not typically tested for explicit support
of just the undeprecated features of either release.
[Viktor Dukhovni]
*) Add support for setting the minimum and maximum supported protocol.
It can bet set via the SSL_set_min_proto_version() and
SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
MaxProtcol. It's recommended to use the new APIs to disable
protocols instead of disabling individual protocols using
SSL_set_options() or SSL_CONF's Protocol. This change also
removes support for disabling TLS 1.2 in the OpenSSL TLS
client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
*) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
[Andy Polyakov]
*) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
and integrates ECDSA and ECDH functionality into EC. Implementations can
now redirect key generation and no longer need to convert to or from
ECDSA_SIG format.
Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
include the ec.h header file instead.
[Steve Henson]
*) Remove support for all 40 and 56 bit ciphers. This includes all the export
ciphers who are no longer supported and drops support the ephemeral RSA key
exchange. The LOW ciphers currently doesn't have any ciphers in it.
[Kurt Roeckx]
*) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
opaque. For HMAC_CTX, the following constructors and destructors
were added:
HMAC_CTX *HMAC_CTX_new(void);
void HMAC_CTX_free(HMAC_CTX *ctx);
For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
destroy such methods has been added. See EVP_MD_meth_new(3) and
EVP_CIPHER_meth_new(3) for documentation.
1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
EVP_MD_CTX_reset() should be called instead to reinitialise
an already created structure.
2) For consistency with the majority of our object creators and
destructors, EVP_MD_CTX_(create|destroy) were renamed to
EVP_MD_CTX_(new|free). The old names are retained as macros
for deprecated builds.
[Richard Levitte]
*) Added ASYNC support. Libcrypto now includes the async sub-library to enable
cryptographic operations to be performed asynchronously as long as an
asynchronous capable engine is used. See the ASYNC_start_job() man page for
further details. Libssl has also had this capability integrated with the
introduction of the new mode SSL_MODE_ASYNC and associated error
SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
pages. This work was developed in partnership with Intel Corp.
*) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
always enabled now. If you want to disable the support you should
exclude it using the list of supported ciphers. This also means that the
"-no_ecdhe" option has been removed from s_server.
*) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
SSL_{CTX_}set1_curves() which can set a list.
[Kurt Roeckx]
*) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
curve you want to support using SSL_{CTX_}set1_curves().
[Kurt Roeckx]
*) State machine rewrite. The state machine code has been significantly
refactored in order to remove much duplication of code and solve issues
with the old code (see ssl/statem/README for further details). This change
does have some associated API changes. Notably the SSL_state() function
has been removed and replaced by SSL_get_state which now returns an
"OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
altogether. The previous handshake states defined in ssl.h and ssl3.h have
*) All instances of the string "ssleay" in the public API were replaced
with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
Some error codes related to internal RSA_eay API's were renamed.
*) The demo files in crypto/threads were moved to demo/threads.
[Rich Salz]
*) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
*) New ASN.1 embed macro.
New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
structure is not allocated: it is part of the parent. That is instead of
FOO *x;
it must be:
FOO x;
This reduces memory fragmentation and make it impossible to accidentally
set a mandatory field to NULL.
This currently only works for some fields specifically a SEQUENCE, CHOICE,
or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
SEQUENCE OF.
[Steve Henson]
*) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
[Emilia Käsper]
*) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
DES and RC4 ciphersuites.
[Matt Caswell]
*) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
This changes the decoding behaviour for some invalid messages,
though the change is mostly in the more lenient direction, and
legacy behaviour is preserved as much as possible.
[Emilia Käsper]
*) Fix no-stdio build.
[ David Woodhouse <David.Woodhouse@intel.com> and also
Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
*) New testing framework
The testing framework has been largely rewritten and is now using
perl and the perl modules Test::Harness and an extended variant of
Test::More called OpenSSL::Test to do its work. All test scripts in
test/ have been rewritten into test recipes, and all direct calls to
executables in test/Makefile have become individual recipes using the
simplified testing OpenSSL::Test::Simple.
For documentation on our testing modules, do:
perldoc test/testlib/OpenSSL/Test/Simple.pm
perldoc test/testlib/OpenSSL/Test.pm
[Richard Levitte]
*) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
are used; the latter aborts on memory leaks (usually checked on exit).
Some undocumented "set malloc, etc., hooks" functions were removed
and others were changed. All are now documented.
[Rich Salz]
*) In DSA_generate_parameters_ex, if the provided seed is too short,
return an error
[Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
*) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
from RFC4279, RFC4785, RFC5487, RFC5489.
Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
original RSA_PSK patch.
[Steve Henson]
*) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
era flag was never set throughout the codebase (only read). Also removed
SSL3_FLAGS_POP_BUFFER which was only used if
SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
[Matt Caswell]
*) Changed the default name options in the "ca", "crl", "req" and "x509"
to be "oneline" instead of "compat".
[Richard Levitte]
*) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
not aware of clients that still exhibit this bug, and the workaround
hasn't been working properly for a while.
*) The return type of BIO_number_read() and BIO_number_written() as well as
the corresponding num_read and num_write members in the BIO structure has
changed from unsigned long to uint64_t. On platforms where an unsigned
long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
transferred.
[Matt Caswell]
*) Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
[Matt Caswell]
*) Removed support for the two export grade static DH ciphersuites
EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
were newly added (along with a number of other static DH ciphersuites) to
1.0.2. However the two export ones have *never* worked since they were
introduced. It seems strange in any case to be adding new export
ciphersuites, and given "logjam" it also does not seem correct to fix them.
[Matt Caswell]
*) Version negotiation has been rewritten. In particular SSLv23_method(),
SSLv23_client_method() and SSLv23_server_method() have been deprecated,
and turned into macros which simply call the new preferred function names
TLS_method(), TLS_client_method() and TLS_server_method(). All new code
should use the new names instead. Also as part of this change the ssl23.h
header file has been removed.
[Matt Caswell]
*) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
code and the associated standard is no longer considered fit-for-purpose.
[Matt Caswell]
*) RT2547 was closed. When generating a private key, try to make the
output file readable only by the owner. This behavior change might
be noticeable when interacting with other software.
*) Documented all exdata functions. Added CRYPTO_free_ex_index.
Added a test.
[Rich Salz]
*) Added HTTP GET support to the ocsp command.
[Rich Salz]
*) Changed default digest for the dgst and enc commands from MD5 to
sha256
[Rich Salz]
*) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
[Matt Caswell]
*) Added support for TLS extended master secret from
draft-ietf-tls-session-hash-03.txt. Thanks for Alfredo Pironti for an
initial patch which was a great help during development.
[Steve Henson]
*) All libssl internal structures have been removed from the public header
files, and the OPENSSL_NO_SSL_INTERN option has been removed (since it is
now redundant). Users should not attempt to access internal structures
directly. Instead they should use the provided API functions.
[Matt Caswell]
*) config has been changed so that by default OPENSSL_NO_DEPRECATED is used.
Access to deprecated functions can be re-enabled by running config with
"enable-deprecated". In addition applications wishing to use deprecated
functions must define OPENSSL_USE_DEPRECATED. Note that this new behaviour
will, by default, disable some transitive includes that previously existed
in the header files (e.g. ec.h will no longer, by default, include bn.h)
[Matt Caswell]
*) Added support for OCB mode. OpenSSL has been granted a patent license
compatible with the OpenSSL license for use of OCB. Details are available
at https://www.openssl.org/source/OCB-patent-grant-OpenSSL.pdf. Support
for OCB can be removed by calling config with no-ocb.
*) SSLv2 support has been removed. It still supports receiving a SSLv2
compatible client hello.
[Kurt Roeckx]
*) Increased the minimal RSA keysize from 256 to 512 bits [Rich Salz],
done while fixing the error code for the key-too-small case.
[Annie Yousar <a.yousar@informatik.hu-berlin.de>]
*) CA.sh has been removmed; use CA.pl instead.
[Rich Salz]
*) Remove various unsupported platforms:
Sony NEWS4
BEOS and BEOS_R5
NeXT
SUNOS
MPE/iX
Sinix/ReliantUNIX RM400
DGUX
NCR
Tandem
Cray
16-bit platforms such as WIN16
*) Clean up OPENSSL_NO_xxx #define's
Use setbuf() and remove OPENSSL_NO_SETVBUF_IONBF
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
OPENSSL_NO_EC{DH,DSA} merged into OPENSSL_NO_EC
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Remove OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
Remove MS_STATIC; it's a relic from platforms <32 bits.
Remove all but one '#ifdef undef' which is to be looked at.
[Rich Salz]
*) Clean up calling of xxx_free routines.
Just like free(), fix most of the xxx_free routines to accept
NULL. Remove the non-null checks from callers. Save much code.
[Rich Salz]
*) Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Contributed by Akamai Technologies under our Corporate CLA.
[Rich Salz]
*) Experimental support for a new, fast, unbiased prime candidate generator,
bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
[Felix Laurie von Massenbach <felix@erbridge.co.uk>]
Martin Kaiser
committed
*) New output format NSS in the sess_id command line tool. This allows
exporting the session id and the master key in NSS keylog format.
[Martin Kaiser <martin@kaiser.cx>]
*) Harmonize version and its documentation. -f flag is used to display
compilation flags.
[mancha <mancha1@zoho.com>]
*) Fix eckey_priv_encode so it immediately returns an error upon a failure
in i2d_ECPrivateKey. Thanks to Ted Unangst for feedback on this issue.
*) Fix some double frees. These are not thought to be exploitable.
[mancha <mancha1@zoho.com>]
*) A missing bounds check in the handling of the TLS heartbeat extension
can be used to reveal up to 64k of memory to a connected client or
server.
Thanks for Neel Mehta of Google Security for discovering this bug and to
Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
preparing the fix (CVE-2014-0160)
[Adam Langley, Bodo Moeller]
*) Fix for the attack described in the paper "Recovering OpenSSL
ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
by Yuval Yarom and Naomi Benger. Details can be obtained from:
http://eprint.iacr.org/2014/140
Thanks to Yuval Yarom and Naomi Benger for discovering this
flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
[Yuval Yarom and Naomi Benger]
*) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
this fixes a limitation in previous versions of OpenSSL.
*) Experimental encrypt-then-mac support.
Experimental support for encrypt then mac from
draft-gutmann-tls-encrypt-then-mac-02.txt
To enable it set the appropriate extension number (0x42 for the test
server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
For non-compliant peers (i.e. just about everything) this should have no
effect.
WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
*) Add EVP support for key wrapping algorithms, to avoid problems with
existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
algorithms and include tests cases.
[Steve Henson]
*) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
enveloped data.
[Steve Henson]
*) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
MGF1 digest and OAEP label.
[Steve Henson]
*) Make openssl verify return errors.
[Chris Palmer <palmer@google.com> and Ben Laurie]
Dr. Stephen Henson
committed
*) New function ASN1_TIME_diff to calculate the difference between two
ASN1_TIME structures or one structure and the current time.
[Steve Henson]
*) Update fips_test_suite to support multiple command line options. New
test to induce all self test errors in sequence and check expected
failures.
[Steve Henson]
*) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
sign or verify all in one operation.
[Steve Henson]
*) Add fips_algvs: a multicall fips utility incorporating all the algorithm
test programs and fips_test_suite. Includes functionality to parse
the minimal script output of fipsalgest.pl directly.
[Steve Henson]
*) Add authorisation parameter to FIPS_module_mode_set().
[Steve Henson]
*) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
[Steve Henson]
*) Use separate DRBG fields for internal and external flags. New function
FIPS_drbg_health_check() to perform on demand health checking. Add
generation tests to fips_test_suite with reduced health check interval to
demonstrate periodic health checking. Add "nodh" option to
fips_test_suite to skip very slow DH test.
[Steve Henson]
*) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
based on NID.
[Steve Henson]
*) More extensive health check for DRBG checking many more failure modes.
New function FIPS_selftest_drbg_all() to handle every possible DRBG
combination: call this in fips_test_suite.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add support for Dual EC DRBG from SP800-90. Update DRBG algorithm test
and POST to handle Dual EC cases.
[Steve Henson]
*) Add support for canonical generation of DSA parameter 'g'. See
FIPS 186-3 A.2.3.
Dr. Stephen Henson
committed
*) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
POST to handle HMAC cases.
*) Add functions FIPS_module_version() and FIPS_module_version_text()
to return numerical and string versions of the FIPS module number.
*) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
outside the validated module in the FIPS capable OpenSSL.
[Steve Henson]
*) Minor change to DRBG entropy callback semantics. In some cases
there is no multiple of the block length between min_len and
max_len. Allow the callback to return more than max_len bytes
of entropy but discard any extra: it is the callback's responsibility
to ensure that the extra data discarded does not impact the
requested amount of entropy.
[Steve Henson]
*) Add PRNG security strength checks to RSA, DSA and ECDSA using
information in FIPS186-3, SP800-57 and SP800-131A.
[Steve Henson]
*) CCM support via EVP. Interface is very similar to GCM case except we
must supply all data in one chunk (i.e. no update, final) and the
message length must be supplied if AAD is used. Add algorithm test
support.
*) Initial version of POST overhaul. Add POST callback to allow the status
of POST to be monitored and/or failures induced. Modify fips_test_suite
to use callback. Always run all selftests even if one fails.
[Steve Henson]
Dr. Stephen Henson
committed
*) XTS support including algorithm test driver in the fips_gcmtest program.
Note: this does increase the maximum key length from 32 to 64 bytes but
there should be no binary compatibility issues as existing applications
will never use XTS mode.
*) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
performs algorithm blocking for unapproved PRNG types. Also do not
set PRNG type in FIPS_mode_set(): leave this to the application.
Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
the standard OpenSSL PRNG: set additional data to a date time vector.
[Steve Henson]
*) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
This shouldn't present any incompatibility problems because applications
shouldn't be using these directly and any that are will need to rethink
anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
[Steve Henson]
*) Extensive self tests and health checking required by SP800-90 DRBG.
Remove strength parameter from FIPS_drbg_instantiate and always
instantiate at maximum supported strength.
[Steve Henson]
*) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
[Steve Henson]
*) New algorithm test program fips_dhvs to handle DH primitives only testing.
[Steve Henson]
*) New function DH_compute_key_padded() to compute a DH key and pad with
leading zeroes if needed: this complies with SP800-56A et al.
[Steve Henson]
*) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
anything, incomplete, subject to change and largely untested at present.
[Steve Henson]
*) Modify fipscanisteronly build option to only build the necessary object
files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
[Steve Henson]
*) Add experimental option FIPSSYMS to give all symbols in
fipscanister.o and FIPS or fips prefix. This will avoid
conflicts with future versions of OpenSSL. Add perl script
util/fipsas.pl to preprocess assembly language source files
and rename any affected symbols.
*) Add selftest checks and algorithm block of non-fips algorithms in
FIPS mode. Remove DES2 from selftests.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
return internal method without any ENGINE dependencies. Add new
tiny fips sign and verify functions.
Dr. Stephen Henson
committed
[Steve Henson]
*) New build option no-ec2m to disable characteristic 2 code.
[Steve Henson]
*) New build option "fipscanisteronly". This only builds fipscanister.o
and (currently) associated fips utilities. Uses the file Makefile.fips
instead of Makefile.org as the prototype.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add some FIPS mode restrictions to GCM. Add internal IV generator.
Update fips_gcmtest to use IV generator.
[Steve Henson]
Dr. Stephen Henson
committed
*) Initial, experimental EVP support for AES-GCM. AAD can be input by
setting output buffer to NULL. The *Final function must be
called although it will not retrieve any additional data. The tag
can be set or retrieved with a ctrl. The IV length is by default 12
bytes (96 bits) but can be set to an alternative value. If the IV
length exceeds the maximum IV length (currently 16 bytes) it cannot be
set before the key.
[Steve Henson]
Dr. Stephen Henson
committed
*) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
underlying do_cipher function handles all cipher semantics itself
including padding and finalisation. This is useful if (for example)
an ENGINE cipher handles block padding itself. The behaviour of
do_cipher is subtly changed if this flag is set: the return value
is the number of characters written to the output buffer (zero is
no longer an error code) or a negative error code. Also if the
Dr. Stephen Henson
committed
input buffer is NULL and length 0 finalisation should be performed.
Dr. Stephen Henson
committed
[Steve Henson]
*) If a candidate issuer certificate is already part of the constructed
path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
[Steve Henson]
*) Improve forward-security support: add functions
void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
for use by SSL/TLS servers; the callback function will be called whenever a
new session is created, and gets to decide whether the session may be
cached to make it resumable (return 0) or not (return 1). (As by the
SSL/TLS protocol specifications, the session_id sent by the server will be
empty to indicate that the session is not resumable; also, the server will
not generate RFC 4507 (RFC 5077) session tickets.)
A simple reasonable callback implementation is to return is_forward_secure.
This parameter will be set to 1 or 0 depending on the ciphersuite selected
by the SSL/TLS server library, indicating whether it can provide forward
security.
[Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
*) New -verify_name option in command line utilities to set verification
parameters by name.
[Steve Henson]
*) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
Add CMAC pkey methods.
[Steve Henson]
*) Experimental renegotiation in s_server -www mode. If the client
browses /reneg connection is renegotiated. If /renegcert it is
renegotiated requesting a certificate.
[Steve Henson]
*) Add an "external" session cache for debugging purposes to s_server. This
should help trace issues which normally are only apparent in deployed
multi-process servers.
[Steve Henson]
*) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
return value is ignored. NB. The functions RAND_add(), RAND_seed(),
BIO_set_cipher() and some obscure PEM functions were changed so they
can now return an error. The RAND changes required a change to the
RAND_METHOD structure.
[Steve Henson]
*) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
a gcc attribute to warn if the result of a function is ignored. This
is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
whose return value is often ignored.
[Steve Henson]
Andy Polyakov
committed
*) New -noct, -requestct, -requirect and -ctlogfile options for s_client.
These allow SCTs (signed certificate timestamps) to be requested and
validated when establishing a connection.
[Rob Percival <robpercival@google.com>]
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
Changes between 1.0.2f and 1.0.2g [1 Mar 2016]
* Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
Builds that are not configured with "enable-weak-ssl-ciphers" will not
provide any "EXPORT" or "LOW" strength ciphers.
[Viktor Dukhovni]
* Disable SSLv2 default build, default negotiation and weak ciphers. SSLv2
is by default disabled at build-time. Builds that are not configured with
"enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used,
users who want to negotiate SSLv2 via the version-flexible SSLv23_method()
will need to explicitly call either of:
SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
or
SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
as appropriate. Even if either of those is used, or the application
explicitly uses the version-specific SSLv2_method() or its client and
server variants, SSLv2 ciphers vulnerable to exhaustive search key
recovery have been removed. Specifically, the SSLv2 40-bit EXPORT
ciphers, and SSLv2 56-bit DES are no longer available.
(CVE-2016-0800)
[Viktor Dukhovni]
*) Fix a double-free in DSA code
A double free bug was discovered when OpenSSL parses malformed DSA private
keys and could lead to a DoS attack or memory corruption for applications
that receive DSA private keys from untrusted sources. This scenario is
considered rare.
This issue was reported to OpenSSL by Adam Langley(Google/BoringSSL) using
libFuzzer.
(CVE-2016-0705)
[Stephen Henson]
*) Disable SRP fake user seed to address a server memory leak.
Add a new method SRP_VBASE_get1_by_user that handles the seed properly.
SRP_VBASE_get_by_user had inconsistent memory management behaviour.
In order to fix an unavoidable memory leak, SRP_VBASE_get_by_user
was changed to ignore the "fake user" SRP seed, even if the seed
is configured.
Users should use SRP_VBASE_get1_by_user instead. Note that in
SRP_VBASE_get1_by_user, caller must free the returned value. Note
also that even though configuring the SRP seed attempts to hide
invalid usernames by continuing the handshake with fake
credentials, this behaviour is not constant time and no strong
guarantees are made that the handshake is indistinguishable from
that of a valid user.
(CVE-2016-0798)
[Emilia Käsper]
*) Fix BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
In the BN_hex2bn function the number of hex digits is calculated using an
int value |i|. Later |bn_expand| is called with a value of |i * 4|. For
large values of |i| this can result in |bn_expand| not allocating any
memory because |i * 4| is negative. This can leave the internal BIGNUM data
field as NULL leading to a subsequent NULL ptr deref. For very large values