Newer
Older
It shall include the following components:
Fields:
* value [**ObjectDimensionValue**](#ObjectDimensionValue) <br>
the object dimension value which can be estimated as the mean of the current distribution.
* confidence [**ObjectDimensionConfidence**](#ObjectDimensionConfidence) <br>
the associated confidence value.
**Categories**: Sensing information
**Revision**: _Created in V2.1.1_
```asn1
ObjectDimension ::= SEQUENCE {
value ObjectDimensionValue,
confidence ObjectDimensionConfidence
}
```
### <a name="Path"></a>Path
This DF represents a path with a set of path points.
It shall contain up to `40` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories**: GeoReference information Vehicle information
**Revision**: _created in V2.1.1 based on PathHistory_
```asn1
Path::= SEQUENCE (SIZE(0..40)) OF PathPoint
```
### <a name="PathHistory"></a>PathHistory
This DF represents a path history with a set of path points.
It shall contain up to `40` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories**: GeoReference information Vehicle information
**Revision**: _semantics updated in V2.1.1_
>>>
NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Path**](#Path) instead
>>>
```asn1
```
### <a name="PathPredicted"></a>PathPredicted
This DF represents a predicted path with a set of path points.
It shall contain up to `15` [**PathPoint**](#PathPoint).
The first PathPoint presents an offset delta position with regards to an external reference position.
Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.
**Categories**: GeoReference information
**Revision**: _created in V2.1.1 based on PathHistory_
```asn1
PathPredicted::= SEQUENCE (SIZE(0..15,...)) OF PathPointPredicted
```
### <a name="PathPoint"></a>PathPoint
This DF defines an offset waypoint position within a path.
7081
7082
7083
7084
7085
7086
7087
7088
7089
7090
7091
7092
7093
7094
7095
7096
7097
7098
7099
7100
7101
7102
7103
7104
7105
Fields:
* pathPosition [**DeltaReferencePosition**](#DeltaReferencePosition) <br>
The waypoint position defined as an offset position with regards to a pre-defined reference position.
* pathDeltaTime [**PathDeltaTime**](#PathDeltaTime) OPTIONAL<br>
The optional travel time separated from a waypoint to the predefined reference position.
**Categories**: GeoReference information
**Revision**: _semantics updated in V2.1.1_
```asn1
PathPoint ::= SEQUENCE {
pathPosition DeltaReferencePosition,
pathDeltaTime PathDeltaTime OPTIONAL
}
```
### <a name="PathPointPredicted"></a>PathPointPredicted
This DF defines a predicted offset waypoint position within a path.
Fields:
* deltaLatitude [**DeltaLatitude**](#DeltaLatitude) <br>
an offset latitude with regards to a pre-defined reference position.
* deltaLongitude [**DeltaLongitude**](#DeltaLongitude) <br>
an offset longitude with regards to a pre-defined reference position.
* horizontalPositionConfidence [**PosConfidenceEllipse**](#PosConfidenceEllipse) OPTIONAL<br>
the confidence value associated to the horizontal geographical position.
* deltaAltitude [**DeltaAltitude**](#DeltaAltitude) DEFAULT unavailable<br>
an offset altitude with regards to a pre-defined reference position.
* altitudeConfidence [**AltitudeConfidence**](#AltitudeConfidence) DEFAULT unavailable<br>
the confidence value associated to the altitude value of the geographical position.
* pathDeltaTime [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) <br>
The travel time separated from the waypoint to the predefined reference position.
**Categories**: GeoReference information
**Revision**: _semantics updated in V2.1.1_
```asn1
PathPointPredicted::= SEQUENCE {
deltaLatitude DeltaLatitude,
deltaLongitude DeltaLongitude,
horizontalPositionConfidence PosConfidenceEllipse OPTIONAL,
deltaAltitude DeltaAltitude DEFAULT unavailable,
altitudeConfidence AltitudeConfidence DEFAULT unavailable,
...
}
```
### <a name="PerceivedObject"></a>PerceivedObject
This DF contains information about a perceived object including its kinematic state and attitude vector in a pre-defined coordinate system.
* objectId [**Identifier2B**](#Identifier2B) OPTIONAL<br>
optional identifier assigned to a detected object.
* timeOfMeasurement [**DeltaTimeMilliSecondPosNeg**](#DeltaTimeMilliSecondPosNeg) <br>
the time difference from a reference time to the time of the measurement of the object.
Negative values indicate that the provided object state refers to a point in time before the reference time.
* position [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) <br>
the position of the geometric centre of the object´s bounding box within the pre-defined coordinate system, with the associated variance.
* velocity [**Velocity3dWithConfidence**](#Velocity3dWithConfidence) OPTIONAL<br>
the velocity vector of the object within the pre-defined coordinate system with the associated variance.
* acceleration [**Acceleration3dWithConfidence**](#Acceleration3dWithConfidence) OPTIONAL<br>
the acceleration vector of the object within the pre-defined coordinate system with the associated variance.
* zAngle [**CartesianAngle**](#CartesianAngle) OPTIONAL<br>
* yAngle [**CartesianAngle**](#CartesianAngle) OPTIONAL<br>
* xAngle [**CartesianAngle**](#CartesianAngle) OPTIONAL<br>
* zAngleVelocity [**CartesianAngularVelocityComponent**](#CartesianAngularVelocityComponent) OPTIONAL<br>
optional angular velocity of the object around the z-axis at the time of measurement, with the associated variance.
The angular velocity is measured with positive values considering the object orientation turning around the z-axis using the right-hand rule.
* lowerTriangularCorrelationMatrices [**LowerTriangularPositiveSemidefiniteMatrices**](#LowerTriangularPositiveSemidefiniteMatrices) OPTIONAL<br>
optional set of lower triangular correlation matrices for selected components of the provided kinematic state and attitude vector.
* objectDimensionZ [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional z-dimension of object bounding box.
This dimension shall be measured along the direction of the z-axis after all the rotations have been applied.
* objectDimensionY [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional y-dimension of the object bounding box.
This dimension shall be measured along the direction of the y-axis after all the rotations have been applied.
* objectDimensionX [**ObjectDimension**](#ObjectDimension) OPTIONAL<br>
optional x-dimension of object bounding box.
This dimension shall be measured along the direction of the x-axis after all the rotations have been applied.
* objectAge [**DeltaTimeMilliSecondPosNeg**](#DeltaTimeMilliSecondPosNeg) (0..1500) OPTIONAL<br>
optional age of the detected and described object, i.e. the difference in time between the moment
it has been first detected and the reference time of the message. Value `1500` indicates that the object has been observed for more than 1.5s.
* objectPerceptionQuality [**ObjectPerceptionQuality**](#ObjectPerceptionQuality) OPTIONAL<br>
optional confidence associated to the object.
* sensorIdList [**SequenceOfIdentifier1B**](#SequenceOfIdentifier1B) OPTIONAL<br>
optional list of sensor-IDs which provided the measurement data.
* classification [**ObjectClassDescription**](#ObjectClassDescription) OPTIONAL<br>
optional classification of the described object
* mapPosition [**MapPosition**](#MapPosition) OPTIONAL<br>
**Categories**: Sensing information
**Revision**: _created in V2.1.1_
```asn1
PerceivedObject ::= SEQUENCE {
position CartesianPosition3dWithConfidence,
velocity Velocity3dWithConfidence OPTIONAL,
acceleration Acceleration3dWithConfidence OPTIONAL,
zAngle CartesianAngle OPTIONAL,
yAngle CartesianAngle OPTIONAL,
xAngle CartesianAngle OPTIONAL,
zAngleVelocity CartesianAngularVelocityComponent OPTIONAL,
lowerTriangularCorrelationMatrices LowerTriangularPositiveSemidefiniteMatrices OPTIONAL,
objectDimensionZ ObjectDimension OPTIONAL,
objectDimensionY ObjectDimension OPTIONAL,
objectDimensionX ObjectDimension OPTIONAL,
objectAge DeltaTimeMilliSecondPosNeg (0..1500) OPTIONAL,
objectPerceptionQuality ObjectPerceptionQuality OPTIONAL,
sensorIdList SequenceOfIdentifier1B OPTIONAL,
classification ObjectClassDescription OPTIONAL,
mapPosition MapPosition OPTIONAL,
...
}
```
### <a name="PolygonalShape"></a>PolygonalShape
This DF represents the shape of a polygonal area or of a right prism.
* shapeReferencePoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
the optional reference point used for the definition of the shape, relative to an externally specified reference position.
If this component is absent, the externally specified reference position represents the shape´s reference point.
* polygon [**SequenceOfCartesianPosition3d**](#SequenceOfCartesianPosition3d) (SIZE(3..16,...))<br>
the polygonal area represented by a list of minimum `3` to maximum `16` [**CartesianPosition3d**](#CartesianPosition3d).
All nodes of the polygon shall be considered relative to the shape´s reference point.
* height [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
the optional height, present if the shape is a right prism extending in the positive z-axis.
**Categories**: GeoReference information
**Revision**: _created in V2.1.1_
```asn1
PolygonalShape ::= SEQUENCE {
shapeReferencePoint CartesianPosition3d OPTIONAL,
polygon SequenceOfCartesianPosition3d (SIZE(3..16,...)),
height StandardLength12b OPTIONAL
}
```
### <a name="PosConfidenceEllipse"></a>PosConfidenceEllipse
This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a
confidence level of 95 %. The centre of the ellipse shape corresponds to the reference
position point for which the position accuracy is evaluated.
Fields:
* semiMajorConfidence [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the major axis, i.e. distance between the centre point
and major axis point of the position accuracy ellipse.
* semiMinorConfidence [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the minor axis, i.e. distance between the centre point
and minor axis point of the position accuracy ellipse.
* semiMajorOrientation [**HeadingValue**](#HeadingValue) <br>
orientation direction of the ellipse major axis of the position accuracy
ellipse with regards to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
**Categories**: GeoReference information
**Revision**: _V1.3.1_
```asn1
PosConfidenceEllipse ::= SEQUENCE {
semiMajorConfidence SemiAxisLength,
semiMinorConfidence SemiAxisLength,
7339
7340
7341
7342
7343
7344
7345
7346
7347
7348
7349
7350
7351
7352
7353
7354
7355
7356
7357
7358
7359
7360
7361
7362
7363
7364
7365
7366
7367
7368
7369
7370
7371
7372
7373
7374
7375
7376
7377
semiMajorOrientation HeadingValue
}
```
### <a name="PositionConfidenceEllipse"></a>PositionConfidenceEllipse
This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a
confidence level of 95 %. The centre of the ellipse shape corresponds to the reference
position point for which the position accuracy is evaluated.
It shall include the following components:
Fields:
* semiMajorAxisLength [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the major axis, i.e. distance between the centre point
and major axis point of the position accuracy ellipse.
* semiMinorAxisLength [**SemiAxisLength**](#SemiAxisLength) <br>
half of length of the minor axis, i.e. distance between the centre point
and minor axis point of the position accuracy ellipse.
* semiMajorAxisOrientation [**Wgs84AngleValue**](#Wgs84AngleValue) <br>
orientation direction of the ellipse major axis of the position accuracy
ellipse with regards to the WGS84 north.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
**Categories**: GeoReference information
**Revision**: _created in V2.1.1 based on @ref PosConfidenceEllipse_
```asn1
PositionConfidenceEllipse ::= SEQUENCE {
semiMajorAxisLength SemiAxisLength,
semiMinorAxisLength SemiAxisLength,
semiMajorAxisOrientation Wgs84AngleValue
}
```
### <a name="PositionOfPillars"></a>PositionOfPillars
This DF shall contain a list of distances [**PosPillar**](#PosPillar) that refer to the perpendicular distance between centre of vehicle front bumper
and vehicle pillar A, between neighbour pillars until the last pillar of the vehicle.
Vehicle pillars refer to the vertical or near vertical support of vehicle,
designated respectively as the A, B, C or D and other pillars moving in side profile view from the front to rear.
The first value of the DF refers to the perpendicular distance from the centre of vehicle front bumper to
vehicle A pillar. The second value refers to the perpendicular distance from the centre position of A pillar
to the B pillar of vehicle and so on until the last pillar.
**Categories**: Vehicle information
**Revision**: _V1.3.1_
```asn1
PositionOfPillars ::= SEQUENCE (SIZE(1..3, ...)) OF PosPillar
```
### <a name="ProtectedCommunicationZone"></a>ProtectedCommunicationZone
This DF describes a zone of protection inside which the ITS communication should be restricted.
7405
7406
7407
7408
7409
7410
7411
7412
7413
7414
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7426
7427
7428
7429
7430
Fields:
* protectedZoneType [**ProtectedZoneType**](#ProtectedZoneType) <br>
type of the protected zone.
* expiryTime [**TimestampIts**](#TimestampIts) OPTIONAL<br>
optional time at which the validity of the protected communication zone will expire.
* protectedZoneLatitude [**Latitude**](#Latitude) <br>
latitude of the centre point of the protected communication zone.
* protectedZoneLongitude [**Longitude**](#Longitude) <br>
longitude of the centre point of the protected communication zone.
* protectedZoneRadius [**ProtectedZoneRadius**](#ProtectedZoneRadius) OPTIONAL<br>
optional radius of the protected communication zone in metres.
* protectedZoneId [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL<br>
the optional ID of the protected communication zone.
**Categories**: Infrastructure information Communication information
**Revision**: _revised in V2.1.1 (changed protectedZoneID to protectedZoneId)_
>>>
NOTE: A protected communication zone may be defined around a CEN DSRC road side equipment.
>>>
```asn1
ProtectedCommunicationZone ::= SEQUENCE {
protectedZoneType ProtectedZoneType,
expiryTime TimestampIts OPTIONAL,
protectedZoneLatitude Latitude,
protectedZoneLongitude Longitude,
protectedZoneRadius ProtectedZoneRadius OPTIONAL,
...
}
```
### <a name="ProtectedCommunicationZonesRSU"></a>ProtectedCommunicationZonesRSU
This DF shall contain a list of [**ProtectedCommunicationZone**](#ProtectedCommunicationZone) provided by a road side ITS-S (Road Side Unit RSU).
7459
7460
7461
7462
7463
7464
7465
7466
7467
7468
7469
7470
7471
7472
7473
7474
7475
7476
7477
7478
7479
7480
It may provide up to 16 protected communication zones information.
**Categories**: Infrastructure information Communication information
**Revision**: _V1.3.1_
```asn1
ProtectedCommunicationZonesRSU ::= SEQUENCE (SIZE(1..16)) OF ProtectedCommunicationZone
```
### <a name="PtActivation"></a>PtActivation
This DF represents activation data for real-time systems designed for operations control, traffic light priorities, track switches, barriers, etc.
using a range of activation devices equipped in public transport vehicles.
The activation of the corresponding equipment is triggered by the approach or passage of a public transport
vehicle at a certain point (e.g. a beacon).
Today there are different payload variants defined for public transport activation-data. The R09.x is one of
the industry standard used by public transport vehicles (e.g. buses, trams) in Europe (e.g. Germany Austria)
for controlling traffic lights, barriers, bollards, etc. This DF shall include information like route, course,
The R09.x content is defined in VDV recommendation 420 [i.7]. It includes following information:
7485
7486
7487
7488
7489
7490
7491
7492
7493
7494
7495
7496
7497
7498
7499
7500
7501
7502
7503
7504
7505
7506
7507
7508
7509
7510
7511
7512
7513
7514
7515
- Priority Request Information (pre-request, request, ready to start)
- End of Prioritization procedure
- Priority request direction
- Public Transport line number
- Priority of public transport
- Route line identifier of the public transport
- Route number identification
- Destination of public transport vehicle
Other countries may use different message sets defined by the local administration.
Fields:
* ptActivationType [**PtActivationType**](#PtActivationType) <br>
type of activation.
* ptActivationData [**PtActivationData**](#PtActivationData) <br>
**Categories**: Vehicle information
**Revision**: _V1.3.1_
```asn1
PtActivation ::= SEQUENCE {
ptActivationType PtActivationType,
ptActivationData PtActivationData
}
```
### <a name="RadialShape"></a>RadialShape
This DF describes a radial shape. The triangular or cone-shaped volume is
constructed by sweeping the provided range about the reference point between a horizontal start
and a horizontal end angle in positive angular direction of the WGS84
coordinate system. A vertical opening angle may be provided in a Cartesian coordinate system with
the x-axis located in the North-East plane of the WGS84 coordinate system. The sensor height may
be provided to reflect characteristics of sensors mounted at an altitude (e.g. sensors mounted
above intersections).
* shapeReferencePoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
the optional reference point used for the definition of the shape, relative to an externally specified reference position.
If this component is absent, the externally specified reference position represents the shape´s reference point.
* range [**StandardLength12b**](#StandardLength12b) <br>
the radial range of the shape from the shape´s reference point.
* stationaryHorizontalOpeningAngleStart [**Wgs84AngleValue**](#Wgs84AngleValue) <br>
the orientation indicating the beginning of the
shape's horizontal opening angle in positive angular direction with respect to the
WGS84 coordinate system.
* stationaryHorizontalOpeningAngleEnd [**Wgs84AngleValue**](#Wgs84AngleValue) <br>
The orientation indicating the end of the shape's
horizontal opening angle in positive angular direction with respect to the WGS84 coordinate system.
* verticalOpeningAngleStart [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional orientation indicating the beginning of the shape`s
opening angle in positive angular direction of a Cartesian coordinate system with its x-axis
located in the north-east plane of the WGS84 coordinate system.
* verticalOpeningAngleEnd [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional orientation indicating the end of the shape's
vertical opening angle in positive angular direction of a Cartesian coordinate system with its x-axis
located in the north-east plane of the WGS84 coordinate system.
**Categories**: Sensing information
**Revision**: _created in V2.1.1_
```asn1
RadialShape ::= SEQUENCE {
range StandardLength12b,
stationaryHorizontalOpeningAngleStart Wgs84AngleValue,
stationaryHorizontalOpeningAngleEnd Wgs84AngleValue,
verticalOpeningAngleStart CartesianAngleValue OPTIONAL,
verticalOpeningAngleEnd CartesianAngleValue OPTIONAL
}
```
### <a name="RadialShapes"></a>RadialShapes
This DF describes a list of radial shapes.
Fields:
* refPointId [**Identifier1B**](#Identifier1B) <br>
the identification of the reference point in case of a sensor mounted to trailer. Defaults to ITS ReferencePoint (0).
* xCoordinate [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) <br>
the x-coordinate of the offset point.
* yCoordinate [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) <br>
the y-coordinate of the offset point.
* zCoordinate [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) OPTIONAL<br>
the optional z-coordinate of the offset point.
* radialShapesList [**RadialShapesList**](#RadialShapesList) <br>
the list of radial shape details.
**Categories**: Georeference information
**Revision**: _created in V2.1.1_
```asn1
RadialShapes ::= SEQUENCE {
refPointId Identifier1B,
xCoordinate CartesianCoordinateSmall,
yCoordinate CartesianCoordinateSmall,
zCoordinate CartesianCoordinateSmall OPTIONAL,
7619
7620
7621
7622
7623
7624
7625
7626
7627
7628
7629
7630
7631
7632
7633
7634
7635
7636
7637
7638
7639
7640
7641
7642
}
```
### <a name="RadialShapesList"></a>RadialShapesList
The DF contains a list of [**RadialShapeDetails**](#RadialShapeDetails).
**Categories**: Georeference information
**Revision**: _created in V2.1.1_
```asn1
RadialShapesList ::= SEQUENCE SIZE(1..16,...) OF RadialShapeDetails
```
### <a name="RadialShapeDetails"></a>RadialShapeDetails
This DF describes a radial shape details. The triangular or cone-shaped volume is
constructed by sweeping the provided range about the reference point or about the offset
point (if provided) between a horizontal start and a horizontal end angle in positive angular direction of the WGS84
coordinate system. A vertical opening angle may be provided in a Cartesian coordinate system with
the x-axis located in the North-East plane of the WGS84 coordinate system. The sensor height may
be provided to reflect characteristics of sensors mounted at an altitude (e.g. sensors mounted
above intersections).
Fields:
* range [**StandardLength12b**](#StandardLength12b) <br>
the radial range of the sensor from the reference point or sensor point offset.
* horizontalOpeningAngleStart [**CartesianAngleValue**](#CartesianAngleValue) <br>
the orientation indicating the beginning of the
shape's horizontal opening angle in positive angular direction.
* horizontalOpeningAngleEnd [**CartesianAngleValue**](#CartesianAngleValue) <br>
The orientation indicating the end of the shape's horizontal
opening angle in positive angular direction.
* verticalOpeningAngleStart [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional orientation indicating the beginning of the shape's
vertical opening angle in positive angular direction of a Cartesian coordinate system with its x-axis
located in the north-east plane of the WGS84 coordinate system.
* verticalOpeningAngleEnd [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL<br>
optional orientation indicating the end of the shape's
vertical opening angle in positive angular direction of a Cartesian coordinate system with its x-axis
located in the north-east plane of the WGS84 coordinate system.
**Categories**: Georeference information
**Revision**: _created in V2.1.1_
```asn1
RadialShapeDetails ::= SEQUENCE {
range StandardLength12b,
horizontalOpeningAngleStart CartesianAngleValue,
horizontalOpeningAngleEnd CartesianAngleValue,
verticalOpeningAngleStart CartesianAngleValue OPTIONAL,
verticalOpeningAngleEnd CartesianAngleValue OPTIONAL
}
```
### <a name="RectangularShape"></a>RectangularShape
This DF represents the shape of a rectangular area or a right rectangular prism that is centred on a reference position defined outside of the context of this DF.
Fields:
* centerPoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL<br>
represents an optional offset point which the rectangle is centred on with respect to the reference position.
* semiLength [**StandardLength12b**](#StandardLength12b) <br>
represents half the length of the rectangle.
* semiBreadth [**StandardLength12b**](#StandardLength12b) <br>
represents half the breadth of the rectangle.
* orientation [**Wgs84AngleValue**](#Wgs84AngleValue) OPTIONAL<br>
represents the optional orientation of the lenght of the rectangle in the WGS84 coordinate system.
The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
* height [**StandardLength12b**](#StandardLength12b) OPTIONAL<br>
represents the optional height, present if the shape is a right rectangular prism with height extending in the positive z-axis.
**Categories**: GeoReference information
**Revision**: _created in V2.1.1_
```asn1
RectangularShape ::= SEQUENCE {
centerPoint CartesianPosition3d OPTIONAL,
semiLength StandardLength12b,
semiBreadth StandardLength12b,
orientation Wgs84AngleValue OPTIONAL,
}
```
### <a name="ReferencePosition"></a>ReferencePosition
A position within a geographic coordinate system together with a confidence ellipse.
Fields:
* latitude [**Latitude**](#Latitude) <br>
the latitude of the geographical point.
* longitude [**Longitude**](#Longitude) <br>
the longitude of the geographical point.
* positionConfidenceEllipse [**PosConfidenceEllipse**](#PosConfidenceEllipse) <br>
the confidence ellipse associated to the geographical position.
* altitude [**Altitude**](#Altitude) <br>
the altitude and an altitude accuracy of the geographical point.
**Categories**: GeoReference information
**Revision**: _description updated in V2.1.1_
>>>
NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**ReferencePositionWithConfidence**](#ReferencePositionWithConfidence) instead.
>>>
```asn1
ReferencePosition ::= SEQUENCE {
latitude Latitude,
longitude Longitude,
positionConfidenceEllipse PosConfidenceEllipse,
altitude Altitude
}
```
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7791
7792
7793
7794
7795
7796
7797
7798
7799
7800
7801
7802
7803
7804
7805
7806
7807
7808
7809
7810
7811
7812
7813
7814
### <a name="ReferencePositionWithConfidence"></a>ReferencePositionWithConfidence
A position within a geographic coordinate system together with a confidence ellipse.
It shall include the following components:
Fields:
* latitude [**Latitude**](#Latitude) <br>
the latitude of the geographical point.
* longitude [**Longitude**](#Longitude) <br>
the longitude of the geographical point.
* positionConfidenceEllipse [**PositionConfidenceEllipse**](#PositionConfidenceEllipse) <br>
the confidence ellipse associated to the geographical position.
* altitude [**Altitude**](#Altitude) <br>
the altitude and an altitude accuracy of the geographical point.
**Categories**: GeoReference information
**Revision**: _created in V2.1.1 based on @ref ReferencePosition but using @ref PositionConfidenceEllipse._
```asn1
ReferencePositionWithConfidence ::= SEQUENCE {
latitude Latitude,
longitude Longitude,
positionConfidenceEllipse PositionConfidenceEllipse,
altitude Altitude
}
```
### <a name="RestrictedTypes"></a>RestrictedTypes
This DF shall contain a list of [**StationType**](#StationType). to which a certain traffic restriction, e.g. the speed limit, applies.
**Categories**: Infrastructure information Traffic information
**Revision**: _V1.3.1_
```asn1
RestrictedTypes ::= SEQUENCE (SIZE(1..3, ...)) OF StationType
```
### <a name="RoadSegmentReferenceId"></a>RoadSegmentReferenceId
This DF represents a unique id for a road segment
Fields:
* region [**Identifier2B**](#Identifier2B) OPTIONAL<br>
the optional identifier of the entity that is responsible for the region in which the road segment is placed.
It is the duty of that entity to guarantee that the [**Id**](#Id) is unique within the region.
* id [**Identifier2B**](#Identifier2B) <br>
**Categories**: GeoReference information
**Revision**: _created in V2.1.1_
>>>
NOTE: when the component region is present, the RoadSegmentReferenceId is guaranteed to be globally unique.
>>>
```asn1
RoadSegmentReferenceId ::= SEQUENCE {
region Identifier2B OPTIONAL,
id Identifier2B
}
```
### <a name="SafeDistanceIndication"></a>SafeDistanceIndication
This DF provides the safe distance indication of a traffic participant with other traffic participant(s).
* subjectStation [**StationId**](#StationId) OPTIONAL<br>
optionally indicates one "other" traffic participant identified by its ITS-S.
* safeDistanceIndicator [**SafeDistanceIndicator**](#SafeDistanceIndicator) <br>
indicates whether the distance between the ego ITS-S and the traffic participant(s) is safe.
If subjectStation is present then it indicates whether the distance between the ego ITS-S and the traffic participant indicated in the component subjectStation is safe.
* timeToCollision [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) OPTIONAL<br>
optionally indicated the time-to-collision calculated as sqrt(LaDi<sup>2</sup> + LoDi<sup>2</sup> + VDi<sup>2</sup>)/relative speed
and represented in the nearest 100 ms. This component may be present only if subjectStation is present.
**Categories**: Traffic information Kinematics information
**Revision**: _created in V2.1.1_
>>>
NOTE: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD)
and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD).
```asn1
SafeDistanceIndication ::= SEQUENCE {
safeDistanceIndicator SafeDistanceIndicator,
timeToCollision DeltaTimeTenthOfSecond OPTIONAL,
...
}
```
### <a name="SequenceOfCartesianPosition3d"></a>SequenceOfCartesianPosition3d
This DF shall contain a list of DF [**CartesianPosition3d**](#CartesianPosition3d).
**Categories**: GeoReference information
**Revision**: _created in V2.1.1_
```asn1
SequenceOfCartesianPosition3d ::= SEQUENCE (SIZE(1..16, ...)) OF CartesianPosition3d
```
### <a name="SequenceOfIdentifier1B"></a>SequenceOfIdentifier1B
The DF contains a list of DE [**Identifier1B**](#Identifier1B).
**Categories**: Basic information
**Revision**: _created in V2.1.1_
```asn1
SequenceOfIdentifier1B ::= SEQUENCE SIZE(1..128, ...) OF Identifier1B
```
### <a name="SequenceOfSafeDistanceIndication"></a>SequenceOfSafeDistanceIndication
The DF contains a list of DF [**SafeDistanceIndication**](#SafeDistanceIndication).
**Categories**: Traffic information Kinematics information
**Revision**: _created in V2.1.1_
```asn1
SequenceOfSafeDistanceIndication ::= SEQUENCE(SIZE(1..8,...)) OF SafeDistanceIndication
```
### <a name="SequenceOfTrajectoryInterceptionIndication"></a>SequenceOfTrajectoryInterceptionIndication
The DF shall contain a list of DF [**TrajectoryInterceptionIndication**](#TrajectoryInterceptionIndication).
**Categories**: Traffic information Kinematics information
**Revision**: _created in V2.1.1_
```asn1
SequenceOfTrajectoryInterceptionIndication ::= SEQUENCE (SIZE(1..8,...)) OF TrajectoryInterceptionIndication
```
### <a name="Shape"></a>Shape
This DF provides the definition of a geographical area or volume, based on different options.
* rectangular [**RectangularShape**](#RectangularShape) <br>
definition of an rectangular area or a right rectangular prism (with a rectangular base) also called a cuboid, or informally a rectangular box.
* circular [**CircularShape**](#CircularShape) <br>
definition of an area of circular shape or a right circular cylinder.
* polygonal [**PolygonalShape**](#PolygonalShape) <br>
definition of an area of polygonal shape or a right prism.
* elliptical [**EllipticalShape**](#EllipticalShape) <br>
definition of an area of elliptical shape or a right elliptical cylinder.
* radial [**RadialShape**](#RadialShape) <br>
definition of a radial shape.
* radialShapes [**RadialShapes**](#RadialShapes) <br>
**Categories**: GeoReference information
**Revision**: _Created in V2.1.1_
```asn1
Shape::= CHOICE {
rectangular RectangularShape,
circular CircularShape,
polygonal PolygonalShape,
elliptical EllipticalShape,
radial RadialShape,
radialShapes RadialShapes,
...
}
```
### <a name="Speed"></a>Speed
This DF represents the speed and associated confidence value.
Fields:
* speedValue [**SpeedValue**](#SpeedValue) <br>
the speed value.