Newer
Older
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
DangerousSituationSubCauseCode ::= INTEGER {
unavailable (0),
emergencyElectronicBrakeEngaged (1),
preCrashSystemEngaged (2),
espEngaged (3),
absEngaged (4),
ebEngaged (5),
brakeWarningEngaged (6),
collisionRiskWarningEngaged (7)
} (0..255)
/**
* This DE represents an offset altitude with regards to a defined altitude value.
* It may be used to describe a geographical point with regards to a specific reference geographical position.
*
* The value shall be set to:
* - `-12700` for values equal to or lower than -127 metres.
* - `n` (`n > -12700` and `n <= 0) for altitude offset n x 0,01 meter below the reference position.
* - `0` for no altitudinal offset.
* - `n` (`n > 0` and `n < 12799`) for altitude offset n x 0,01 meter above the reference position.
* - `12799` for values equal to or greater than 127,99 metres.
* - `12800` when the information is unavailable.
*
* @unit: 0.01 metre
* @category: GeoReference information
* @revision: editorial update in V2.1.1
*/
DeltaAltitude ::= INTEGER {
negativeOutOfRange (-12700),
positiveOutOfRange (12799),
unavailable (12800)
} (-12700..12800)
/**
* This DE represents an offset latitude with regards to a defined latitude value.
* It may be used to describe a geographical point with regards to a specific reference geographical position.
*
* The value shall be set to:
* - `n` (`n >= -131071` and `n < 0`) for offset n x 0,1 microdegrees towards the south from the reference position.
* - `0` for no latitudinal offset.
* - `n` (`n > 0` and `n < 131072`) for offset n x 0,1 microdegrees towards the north from the reference position.
* - `131072` when the information is unavailable.
*
* @unit: 0.1 microdegree
* @category: GeoReference information
* @revision: editorial update in V2.1.1
*/
DeltaLatitude ::= INTEGER {
unavailable (131072)
} (-131071..131072)
/**
* This DE represents an offset longitude with regards to a defined longitude value.
* It may be used to describe a geographical point with regards to a specific reference geographical position.
*
* The value shall be set to:
* - `n` (`n >= -131071` and `n < 0`) for offset n x 0,1 microdegrees towards the west from the reference position.
* - `0` for no longitudinal offset.
* - `n` (`n > 0` and `n < 131072`) for offset n x 0,1 microdegrees towards the east from the reference position.
* - `131072` when the information is unavailable.
*
* @unit: 0.1 microdegree
* @category: GeoReference information
* @revision: editorial update in V2.1.1
*/
DeltaLongitude ::= INTEGER {
unavailable (131072)
} (-131071..131072)
/**
* This DE represents a difference in time with respect to a reference time.
*
* @unit: 0,01 s
* @category: Basic information
* @revision: Created in V2.1.1
*/
DeltaTimeHundredthOfSecond::= INTEGER (1..65535, ...)
/**
* This DE represents a difference in time with respect to a reference time.
* Example: a time interval between two consecutive message transmissions.
*
* @unit: 1 ms
* @category: Basic information
* @revision: Created in V2.1.1 from the DE TransmissionInterval
*/
DeltaTimeMilliSecondPos ::= INTEGER (1..10000)
/**
* This DE represents a difference in time with respect to a reference time.
*
* @unit: 1 ms
* @category: Basic information
* @revision: Created in V2.1.1
*/
DeltaTimeMilliSecondPosNeg ::= INTEGER (-1500..1500)
/**
* This DE represents a difference in time with respect to a reference time.
* It can be interpreted as the first 8 bytes of a GenerationDeltaTime. To convert it to a @ref GenerationDeltaTime,
* multiply by 256 (i.e. append a `00` byte)
*
* @unit: 256 milliseconds
* @category: Basic information
* @revision: Created in V2.1.1
*/
DeltaTimeQuarterSecond::= INTEGER (1..255)
/**
* This DE represents a difference in time with respect to a reference time.
*
* @unit: 0,1 s
* @category: Basic information
* @revision: Created in V2.1.1
*/
DeltaTimeTenthOfSecond::= INTEGER {
unavailable (127)
} (0..127)
/**
* This DE represents a difference in time with respect to a reference time.
*
* @unit: 1 s
* @category: Basic information
* @revision: Created in V2.1.1 from ValidityDuration
*/
DeltaTimeSecond ::= INTEGER (0..86400)
/**
* This DE indicates a direction with respect to a defined reference direction.
* Example: a reference direction may be implicitly defined by the definition of a geographical zone.
*
* The value shall be set to:
* - 0 - `sameDirection` - to indicate the same direction as the reference direction.
* - 1 - `oppositeDirection` - to indicateopposite direction as the reference direction.
* - 2 - `bothDirections` - to indicate both directions, i.e. the same and the opposite direction.
* - 3 - `unavailable` - to indicate that the information is unavailable.
*
* @category: GeoReference information
* @revision: Created in V2.1.1
*/
Direction::= INTEGER{
sameDirection (0),
oppositeDirection (1),
bothDirections (2),
unavailable (3)
} (0..3)
/**
* This DE indicates in which direction something is moving.
*
* The value shall be set to:
* - 0 - `forward` - to indicate it is moving forward.
* - 1 - `backwards` - to indicate it is moving backwards.
* - 2 - `unavailable` - to indicate that the information is unavailable.
*
* @category: Kinematics information
* @revision: editorial update in V2.1.1
*/
DriveDirection ::= ENUMERATED {
forward (0),
backward (1),
unavailable (2)
}
/**
* This DE indicates whether a driving lane is open to traffic.
*
* A lane is counted from inside border of the road excluding the hardshoulder. The size of the bit string shall
* correspond to the total number of the driving lanes in the carriageway.
*
* The numbering is matched to @ref LanePosition.
* The bit `0` is used to indicate the innermost lane, bit `1` is used to indicate the second lane from inside border.
*
* If a lane is closed to traffic, the corresponding bit shall be set to `1`. Otherwise, it shall be set to `0`.
*
* @note:Hard shoulder status is not provided by this DE but in @ref HardShoulderStatus.
*
* @category: Traffic information
* @revision: V1.3.1
*/
DrivingLaneStatus ::= BIT STRING (SIZE (1..13))
/**
* This DE indicates whether a vehicle (e.g. public transport vehicle, truck) is under the embarkation process.
* If that is the case, the value is *TRUE*, otherwise *FALSE*.
*
* @category: Vehicle information
* @revision: editorial update in V2.1.1
*/
EmbarkationStatus ::= BOOLEAN
/**
* This DE indicates the right of priority requested or assumed by an operating emergency vehicle.
* The right-of-priority bit shall be set to `1` if the corresponding right is requested.
*
* The corresponding bit shall be set to 1 under the following conditions:
* - 0 - `requestForRightOfWay` - when the vehicle is requesting/assuming the right of way.
* - 1 - `requestForFreeCrossingAtATrafficLight` - when the vehicle is requesting/assuming the right to pass at a (red) traffic light.
*
* @category: Traffic information
* @revision: description revised in V2.1.1
*/
EmergencyPriority ::= BIT STRING {
requestForRightOfWay (0),
requestForFreeCrossingAtATrafficLight (1)
} (SIZE(2))
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode "emergencyVehicleApproaching".
*
* The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on the emergency vehicle approaching event
* is unavailable,
* - 1 - `emergencyVehicleApproaching` - in case an operating emergency vehicle is approaching,
* - 2 -`prioritizedVehicleApproaching` - in case a prioritized vehicle (e.g. bus) is approaching,
* - 3-255 - reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
EmergencyVehicleApproachingSubCauseCode ::= INTEGER {
unavailable (0),
emergencyVehicleApproaching (1),
prioritizedVehicleApproaching (2)
} (0..255)
/**
* This DE indicated the type of energy being used and stored in vehicle.
*
* The corresponding bit shall be set to 1 under the following conditions:
* - 0 - `hydrogenStorage` - when hydrogen is being used and stored in vehicle.
* - 1 - `electricEnergyStorage` - when electric energy is being used and stored in vehicle.
* - 2 - `liquidPropaneGas` - when liquid Propane Gas (LPG) is being used and stored in vehicle.
* - 3 - `compressedNaturalGas ` - when compressedNaturalGas (CNG) is being used and stored in vehicle.
* - 4 - `diesel` - when diesel is being used and stored in vehicle.
* - 5 - `gasoline` - when gasoline is being used and stored in vehicle.
* - 6 - `ammonia` - when ammonia is being used and stored in vehicle.
*
* - Otherwise, the corresponding bit shall be set to `0`.
*
* @category: Vehicle information
* @revision: editorial revision in V2.1.1
*/
EnergyStorageType ::= BIT STRING {
hydrogenStorage (0),
electricEnergyStorage (1),
liquidPropaneGas (2),
compressedNaturalGas (3),
diesel (4),
gasoline (5),
ammonia (6)
}(SIZE(7))
/**
* This DE represents one of the specific categories in the L category: L1, L2, L3, L4, L5, L6, or L7 according to UNECE/TRANS/WP.29/78/Rev.4 [i.18].
*
*
* @category: Vehicle information
* @revision: V2.1.1
*/
EuVehicleCategoryL ::= ENUMERATED { l1, l2, l3, l4, l5, l6, l7 }
/**
* This DE represents one of the specific categories in the M category: M1, M2, or M3 according to UNECE/TRANS/WP.29/78/Rev.4 [i.18].
*
*
* @category: Vehicle information
* @revision: V2.1.1
*/
EuVehicleCategoryM ::= ENUMERATED {m1, m2, m3}
/**
* This DE represents one of the specific categories in the N category: N1, N2, or N3 according to UNECE/TRANS/WP.29/78/Rev.4 [i.18].
*
*
* @category: Vehicle information
* @revision: V2.1.1
*/
EuVehicleCategoryN ::= ENUMERATED {n1, n2, n3}
/**
* This DE represents one of the specific categories in the O category: O1, O2, O3 or O4 according to UNECE/TRANS/WP.29/78/Rev.4 [i.18].
*
*
* @category: Vehicle information
* @revision: V2.1.1
*/
EuVehicleCategoryO ::= ENUMERATED {o1, o2, o3, o4}
/**
* This DE describes the status of the exterior light switches of a vehicle.
*
* The corresponding bit shall be set to 1 under the following conditions:
* - 0 - `lowBeamHeadlightsOn` - when the low beam head light switch is on.
* - 1 - `highBeamHeadlightsOn` - when the high beam head light switch is on.
* - 2 - `leftTurnSignalOn` - when the left turnSignal switch is on.
* - 3 - `rightTurnSignalOn` - when the right turn signal switch is on.
* - 4 - `daytimeRunningLightsOn` - when the daytime running light switch is on.
* - 5 - `reverseLightOn` - when the reverse light switch is on.
* - 6 - `fogLightOn` - when the tail fog light switch is on.
* - 7 - `parkingLightsOn` - when the parking light switch is on.
*
* @note: The value of each bit indicates the state of the switch, which commands the corresponding light.
* The bit corresponding to a specific light is set to `1`, when the corresponding switch is turned on,
* either manually by the driver or automatically by a vehicle system. The bit value does not indicate
* if the corresponding lamps are alight or not.
*
* If a vehicle is not equipped with a certain light or if the light switch status information is not available,
* the corresponding bit shall be set to `0`.
*
* As the bit value indicates only the state of the switch, the turn signal and hazard signal bit values shall not
* alternate with the blinking interval.
*
* For hazard indicator, the `leftTurnSignalOn` (2) and `rightTurnSignalOn` (3) shall be both set to 1.
*
* @category Vehicle information
* @revision: Description revised in V2.1.1
*/
ExteriorLights ::= BIT STRING {
lowBeamHeadlightsOn (0),
highBeamHeadlightsOn (1),
leftTurnSignalOn (2),
rightTurnSignalOn (3),
daytimeRunningLightsOn (4),
reverseLightOn (5),
fogLightOn (6),
parkingLightsOn (7)
} (SIZE(8))
/**
* This DE represents a timestamp based on TimestampIts modulo 65 536.
* This means that generationDeltaTime = TimestampIts mod 65 536.
*
* @category Time information
* @revision: Created in V2.1.1 based on EN 302 637-2
*/
GenerationDeltaTime ::= INTEGER { oneMilliSec(1) } (0..65535)
/**
* This DE indicates the current status of a hard shoulder: whether it is available for special usage
* (e.g. for stopping or for driving) or closed for all vehicles.
*
* The value shall be set to:
* - 0 - `availableForStopping` - if the hard shoulder is available for stopping in e.g. emergency situations.
* - 1 - `closed` - if the hard shoulder is closed and cannot be occupied in any case.
* - 2 - `availableForDriving` - if the hard shoulder is available for regular driving.
*
* @category: Traffic information
* @revision: Description revised in V2.1.1
*/
HardShoulderStatus ::= ENUMERATED {
availableForStopping (0),
closed (1),
availableForDriving (2)}
/**
* This DE represents the value of the sub cause code of the @ref CauseCode `hazardousLocation-AnimalOnTheRoad`.
*
* The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on the animal on the road event is unavailable,
* - 1 - `wildAnimals` - in case wild animals are detected on the road,
* - 2 - `herdOfAnimals`- in case herd of animals are detected on the road,
* - 3 - `smallAnimals` - in case small size animal is detected on the road,
* - 4 - `largeAnimals` - in case large size animal is detected on the road,
* - 5-255 - reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
HazardousLocation-AnimalOnTheRoadSubCauseCode ::= INTEGER {
unavailable (0),
wildAnimals (1),
herdOfAnimals (2),
smallAnimals (3),
largeAnimals (4)
} (0..255)
/**
* This DE represents the sub cause code of the @ref CauseCode `hazardousLocation-DangerousCurve`.
*
* The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on the dangerous curve is unavailable,
* - 1 - `dangerousLeftTurnCurve` - in case the dangerous curve is a left turn curve,
* - 2 - `dangerousRightTurnCurve` - in case the dangerous curve is a right turn curve,
* - 3 - `multipleCurvesStartingWithUnknownTurningDirection` - in case of multiple curves for which the starting curve turning direction is not known,
* - 4 - `multipleCurvesStartingWithLeftTurn` - in case of multiple curves starting with a left turn curve,
* - 5 - `multipleCurvesStartingWithRightTurn` - in case of multiple curves stating with a right turn curve,
* - 6-255 - are reserved for future usage.
*
* The definition of whether a curve is dangerous may vary according to region and according to vehicle types/mass
* and vehicle speed driving on the curve. This definition is out of scope of the present document.
*
* @category: Traffic information
* @revision: V1.3.1
*/
HazardousLocation-DangerousCurveSubCauseCode ::= INTEGER {
unavailable (0),
dangerousLeftTurnCurve (1),
dangerousRightTurnCurve (2),
multipleCurvesStartingWithUnknownTurningDirection (3),
multipleCurvesStartingWithLeftTurn (4),
multipleCurvesStartingWithRightTurn (5)
} (0..255)
/**
* This DE represents the value of the sub cause code of the @ref CauseCode `hazardousLocation-ObstacleOnTheRoad`.
*
* The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on the detected obstacle is unavailable,
* - 1 - `shedLoad` - in case detected obstacle is large amount of obstacles (shedload),
* - 2 - `partsOfVehicles`- in case detected obstacles are parts of vehicles,
* - 3 - `partsOfTyres` - in case the detected obstacles are parts of tyres,
* - 4 - `bigObjects` - in case the detected obstacles are big objects,
* - 5 - `fallenTrees` - in case the detected obstacles are fallen trees,
* - 6 - `hubCaps` - in case the detected obstacles are hub caps,
* - 7 - `waitingVehicles`- in case the detected obstacles are waiting vehicles,
* - 8-255 - reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
HazardousLocation-ObstacleOnTheRoadSubCauseCode ::= INTEGER {
unavailable (0),
shedLoad (1),
partsOfVehicles (2),
partsOfTyres (3),
bigObjects (4),
fallenTrees (5),
hubCaps (6),
waitingVehicles (7)
} (0..255)
/**
* This DE represents the value of the sub cause code of the @ref CauseCode `hazardousLocation-SurfaceCondition`.
*
The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on the road surface condition is unavailable,
* - 1 - `rockfalls` - in case rock falls are detected on the road surface,
* - 2 - `earthquakeDamage`- in case the road surface is damaged by earthquake,
* - 3 - `sewerCollapse` - in case of sewer collapse on the road surface,
* - 4 - `subsidence` - in case road surface is damaged by subsidence,
* - 5 - `snowDrifts` - in case road surface is damaged due to snow drift,
* - 6 - `stormDamage` - in case road surface is damaged by strong storm,
* - 7 - `burstPipe` - in case road surface is damaged due to pipe burst,
* - 8 - `volcanoEruption` - in case road surface is damaged due to volcano eruption,
* - 9 - `fallingIce` - in case road surface damage is due to falling ice,
* - 10 - `fire` - in case there is fire on or near to the road surface,
* - 11-255 - reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
HazardousLocation-SurfaceConditionSubCauseCode ::= INTEGER {
unavailable (0),
rockfalls (1),
earthquakeDamage (2),
sewerCollapse (3),
subsidence (4),
snowDrifts (5),
stormDamage (6),
burstPipe (7),
volcanoEruption (8),
fallingIce (9),
fire (10)
} (0..255)
/**
* This DE represents the absolute accuracy of a reported heading value for a confidence level of 95 %.
*
The value shall be set to:
* - `1` if the heading accuracy is equal to or less than 0,1 degree,
* - `n (n > 1 and n < 125)` if the heading accuracy is equal to or less than n x 0,1 degree and more than (n-1) x 0,1 degree,
* - `125` if the heading accuracy is equal to or less than 12,5 degrees,
* - `126` if the heading accuracy is out of range, i.e. greater than 12,5 degrees,
* - `127` if the heading accuracy information is not available.
*
* @note: The fact that a value is received with confidence set to `unavailable(127)` can be caused by several reasons,
* such as:
* - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
* - the sensor cannot calculate the accuracy due to lack of variables, or
* - there has been a vehicle bus (e.g. CAN bus) error.
* In all 3 cases above, the reported heading value may be valid and used by the application.
*
* @note: If a heading value is received and its confidence is set to `outOfRange(126)`, it means that the reported
* heading value is not valid and therefore cannot be trusted. Such value is not useful for the application.
* @note: this DE is kept for backwards compatibility reasons only. It is reccomended to use the @ref Wgs84AngleConfidence instead.
*
* @unit: 0,1 degree
* @category: GeoReference information
* @revision: Description revised in V2.1.1
*/
HeadingConfidence ::= Wgs84AngleConfidence
/**
HeadingValue
* This DE represents the orientation of the horizontal velocity vector with regards to the WGS84 north.
* When the information is not available, the DE shall be set to 3 601. The value 3600 shall not be used.
*
* @note: this DE is kept for backwards compatibility reasons only. It is reccomended to use the @ref Wgs84AngleValue instead.
*
* Unit: 0,1 degree
* Categories: GeoReference information
* @revision: Description revised in V2.1.1 (usage of value 3600 specified)
*/
HeadingValue ::= Wgs84AngleValue
/**
* This DE represents the height of the left or right longitude carrier of vehicle from base to top (left or right carrier seen from vehicle
* rear to front).
*
* The value shall be set to:
* - `n (n >= 1 and n < 99)` if the height information is equal to or less than n x 0,01 meter and more than (n-1) x 0,01 meter.
* - `99` if the height is out of range, i.e. equal to or greater than 98 cm.
* - `100` if the height information is not available.
*
* @unit 0,01 meter
* @category Vehicle information
* @revision: Description revised in V2.1.1 (the definition of 99 has changed slightly)
*/
HeightLonCarr ::= INTEGER {
unavailable(100)
} (1..100)
/**
* This DE represents the value of the sub cause code of the @ref CauseCode `humanPresenceOnTheRoad`.
*
* The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on human presence on the road is unavailable,
* - 1 - `childrenOnRoadway` - in case children are detected on the road event,
* - 2 - `cyclistOnRoadway` - in case cyclist presence is detected on the road,
* - 3 - `motorcyclistOnRoadway`- in case motorcyclist presence is detected on the road,
* - 4-255 - are reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
HumanPresenceOnTheRoadSubCauseCode ::= INTEGER {
unavailable (0),
childrenOnRoadway (1),
cyclistOnRoadway (2),
motorcyclistOnRoadway (3)
} (0..255)
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode "humanProblem".
*
* The value shall be set to:
* - 0 - `unavailable` - in case further detailed information on human health problem is unavailable,
* - 1 - `glycemiaProblem`- in case human problem is due to glycaemia problem,
* - 2 - `heartProblem` - in case human problem is due to heart problem,
* - 3-255 - reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
HumanProblemSubCauseCode ::= INTEGER {
unavailable (0),
glycemiaProblem (1),
heartProblem (2)
} (0..255)
/**
* This DE is a general identifier.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
Identifier1B ::= INTEGER (0..255)
/**
* This DE is a general identifier.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
Identifier2B ::= INTEGER (0..65535)
/**
* This DE represents the quality level of provided information.
*
* The value shall be set to:
* - 0 - if the information is unavailable.
* - 1 - if the quality level is lowest
* - `n (n > 1 and n < 7)` if the quality level is n.
* - 7 - if the quality level is highest
* @note: Definition of quality level is out of scope of the present document.
*
* @category: Basic information
* @revision: Editorial update in V2.1.1
*/
InformationQuality ::= INTEGER (0..7)
/**
* This DE defines the type of an interference management zone, so that an ITS-S can
* assert the actions to do while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station).
* It is an extension of the type @ref ProtectedZoneType.
*
* The value shall be set to:
* - 0 - `permanentCenDsrcTolling` - as specified in ETSI TS 102 792 [i.23]
* - 1 - `temporaryCenDsrcTolling` - as specified in ETSI TS 102 792 [i.23]
* - 2 - `unavailable` - default value. Set to 2 for backwards compatibility with DSRC tolling
* - 3 - `urbanRail(3)` - as specified in ETSI TS 103 724 [i.24], clause 7
* - 4 - `satelliteStation` - as specified in ETSI TS 103 724 [i.24], clause 7
* - 5 - `fixedLinks(5)` - as specified in ETSI TS 103 724 [i.24], clause 7
*
* @category: Communication information
* @revision: Created in V2.1.1
*/
InterferenceManagementZoneType ::= ENUMERATED {
permanentCenDsrcTolling (0),
temporaryCenDsrcTolling (1),
unavailable (2),
urbanRail (3),
satelliteStation (4),
fixedLinks (5),
...
}
/**
* This DE represents the vehicle type according to ISO 3833 [4].
* A "term No" refers to the number of the corresponding term and its definition in ISO 3833.
*
* The value shall be set to:
* - 0 - `passengerCar` - term No 3.1.1
* - 1 - `saloon` - term No 3.1.1.1 (sedan)
* - 2 - `convertibleSaloon` - term No 3.1.1.2
* - 3 - `pullmanSaloon` - term No 3.1.1.3
* - 4 - `stationWagon` - term No 3.1.1.4
* - 5 - `truckStationWagon` - term No 3.1.1.4.1
* - 6 - `coupe` - term No 3.1.1.5 (coupe)
* - 7 - `convertible` - term No 3.1.1.6 (open tourer, roadstar, spider)
* - 8 - `multipurposePassengerCar` - term No 3.1.1.7
* - 9 - `forwardControlPassengerCar`- term No 3.1.1.8
* - 10 - `specialPassengerCar` - term No 3.1.1.9
* - 11 - `bus (11)` - term No 3.1.2
* - 12 - `minibus` - term No 3.1.2.1
* - 13 - `urbanBus` - term No 3.1.2.2
* - 14 - `interurbanCoach` - term No 3.1.2.3
* - 15 - `longDistanceCoach` - term No 3.1.2.4
* - 16 - `articulatedBus` - term No 3.1.2.5
* - 17 - `trolleyBus ` - term No 3.1.2.6
* - 18 - `specialBus` - term No 3.1.2.7
* - 19 - `commercialVehicle ` - term No 3.1.3
* - 20 - `specialCommercialVehicle` - term No 3.1.3.1
* - 21 - `specialVehicle ` - term No 3.1.4
* - 22 - `trailingTowingVehicle ` - term No 3.1.5 (draw-bar tractor)
* - 23 - `semiTrailerTowingVehicle` - term No 3.1.6 (fifth wheel tractor)
* - 24 - `trailer` - term No 3.2.1
* - 25 - `busTrailer` - term No 3.2.1.1
* - 26 - `generalPurposeTrailer` - term No 3.2.1.2
* - 27 - `caravan` - term No 3.2.1.3
* - 28 - `specialTrailer` - term No 3.2.1.4
* - 29 - `semiTrailer` - term No 3.2.2
* - 30 - `busSemiTrailer ` - term No 3.2.2.1
* - 31 - `generalPurposeSemiTrailer` - term No 3.2.2.2
* - 32 - `specialSemiTrailer` - term No 3.2.2.3
* - 33 - `roadTrain` - term No 3.3.1
* - 34 - `passengerRoadTrain ` - term No 3.3.2
* - 35 - `articulatedRoadTrain` - term No 3.3.3
* - 36 - `doubleRoadTrain` - term No 3.3.4
* - 37 - `compositeRoadTrain` - term No 3.3.5
* - 38 - `specialRoadTrain` - term No 3.3.6
* - 39 - `moped` - term No 3.4
* - 40 - `motorCycle` - term No 3.5
* - 41-255 - reserved for future use
*
* @category: Vehicle information
* @revision: Created in V2.1.1
*/
Iso3833VehicleType ::= INTEGER {
passengerCar (0),
saloon (1),
convertibleSaloon (2),
pullmanSaloon (3),
stationWagon (4),
truckStationWagon (5),
coupe (6),
convertible (7),
multipurposePassengerCar (8),
forwardControlPassengerCar (9),
specialPassengerCar (10),
bus (11),
minibus (12),
urbanBus (13),
interurbanCoach (14),
longDistanceCoach (15),
articulatedBus (16),
trolleyBus (17),
specialBus (18),
commercialVehicle (19),
specialCommercialVehicle (20),
specialVehicle (21),
trailingTowingVehicle (22),
semiTrailerTowingVehicle (23),
trailer (24),
busTrailer (25),
generalPurposeTrailer (26),
caravan (27),
specialTrailer (28),
semiTrailer (29),
busSemiTrailer (30),
generalPurposeSemiTrailer (31),
specialSemiTrailer (32),
roadTrain (33),
passengerRoadTrain (34),
articulatedRoadTrain (35),
doubleRoadTrain (36),
compositeRoadTrain (37),
specialRoadTrain (38),
moped (39),
motorCycle (40)
} (0..255)
/**
* This DE indicates a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway.
*
* For right-hand traffic roads, the value shall be set to:
* - `-1` if the position is off, i.e. besides the road.
* - `0` if the position is on the inner hard shoulder, i.e. the hard should adjacent to the leftmost lane.
* - `n (n >0 and n < 14)`, if the position is on the n-th driving lane counted from the leftmost lane to the rightmost lane of a specific traffic direction.
* - `14` if the position is on the outer hard shoulder, i.e. the hard should adjacent to rightmost lane (if present).
*
* For left-hand traffic roads, the value shall be set to:
* - `-1` if the position is off, i.e. besides the road.
* - `0` if the position is on the inner hard shoulder, i.e. the hard should adjacent to the rightmost lane.
* - `n (n >0 and n < 14)`, if the position is on the n-th driving lane counted from the rightmost lane to the leftmost lane of a specific traffic direction.
* - `14` if the position is on the outer hard shoulder, i.e. the hard should adjacent to leftmost lane (if present).
* @note: in practice this means that the position is counted from "inside" to "outside" no matter which traffic practice is used.
*
* If the carriageway allows only traffic in one direction (e.g. in case of dual or multiple carriageway roads), the position is counted from the physical border of the carriageway.
* If the carriageway allows traffic in both directions and there is no physical delimitation between traffic directions (e.g. on a single carrriageway road),
* the position is counted from the legal (i.e. optical) separation between traffic directions (horizontal marking).
* @category: Road topology information
* @revision: Description revised in V2.1.1
*/
LanePosition ::= INTEGER {
offTheRoad (-1),
innerHardShoulder (0),
outerHardShoulder (14)
} (-1..14)
/**
* This DE represents the type of a lane.
*
* The value shall be set to:
* - 0 - `traffic` - Lane dedicated to the movement of vehicles.
* - 1 - `through` - Lane dedicated to the movement of vehicles travelling ahead and not turning.
* - 2 - `reversible` - Lane where the direction of traffic can be changed to match the peak flow.
* - 3 - `acceleration` - Lane that allows vehicles entering a road to accelerate to the speed of through traffic before merging with it.
* - 4 - `deceleration` - Lane that allows vehicles exiting a road to decelerate before leaving it.
* - 5 - `leftHandTurning` - Lane reserved for slowing down and making a left turn, so as not to disrupt traffic.
* - 6 - `rightHandTurning` - Lane reserved for slowing down and making a right turn so as not to disrupt traffic.
* - 7 - `dedicatedVehicle` - Lane dedicated to movement of motor vehicles with specific characteristics, such as heavy goods vehicles, etc.
* - 8 - `bus` - Lane dedicated to movement of buses providing public transport.
* - 9 - `taxi` - Lane dedicated to movement of taxis.
* - 10 - `hov` - Carpooling lane or high occupancy vehicle lane.
* - 11 - `hot` - High occupancy vehicle lanes that is allowed to be used without meeting the occupancy criteria by paying a toll.
* - 12 - `pedestrian` - Lanes dedicated to pedestrians such as pedestrian sidewalk paths.
* - 13 - `cycleLane` - Lane dedicated to exclusive or preferred use by bicycles.
* - 14 - `median` - Lane not dedicated to movement of vehicles but representing a median / central reservation such as the central median
separating the two directional carriageways of the highway.
* - 15 - `striping` - Lane not dedicated to movement of vehicles but covered with roadway markings.
* - 16 - `trackedVehicle` - Lane dedicated to movement of trains, trams and trolleys.
* - 17 - `parking` - Lanes dedicated to vehicles parking, stopping and loading lanes.
* - 18 - `emergency` - Lane dedicated to vehicles in breakdown or to emergency vehicles also called hard shoulder.
* - 19 - `verge` - Lane representing the verge, i.e. a narrow strip of grass or plants and sometimes also trees located between
the road surface edge and the boundary of a road.
* - 20 `minimumRiskManoeuvre` - Lane dedicated to automated vehicles making a minimum risk manoeuvre.
* - values 21 to 30 reserved for future use
*
* @category: Road topology information
* @revision: V2.1.1
*/
LaneType::= INTEGER{
traffic (0),
through (1),
reversible (2),
acceleration (3),
deceleration (4),
leftHandTurning (5),
rightHandTurning (6),
dedicatedVehicle (7),
bus (8),
taxi (9),
hov (10),
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
pedestrian (12),
cycleLane (13),
median (14),
striping (15),
trackedVehicle (16),
parking (17),
emergency (18),
verge (19),
minimumRiskManoeuvre (20),
unknown (31)
}(0..31)
/**
* This DE represents the width of a lane measured at a defined position.
*
* @unit: 0.01 meter
* @category: GeoReference information
* @revision: Created in V2.1.1
*/
LaneWidth::= INTEGER (0..1023)
/**
* This DE represents the absolute geographical latitude in a WGS84 coordinate system, providing a range of 90 degrees in north or
* in south hemisphere.
*
* The value shall be set to:
* - `n (n >= -900000000 and n < 0)`, i.e. negative values for latitudes south of the Equator.
* - `0` is used for the latitude of the equator.
* - `n (n > 0 and n < 900000001)`, i.e. positive values for latitudes north of the Equator.
* - `900 000 001` when the information is unavailable.
*
* @unit: 0.1 microdegree
* @category: GeoReference information
* @revision: Editorial update in V2.1.1
*/
Latitude ::= INTEGER {
unavailable(900000001)
} (-900000000..900000001)
/**
* This DE represents the vehicle acceleration at lateral direction in the centre of the mass of the empty vehicle.
* It corresponds to the vehicle coordinate system as specified in ISO 8855 [2].
* The value shall be set to:
* - `-160` for values equal to or less than -16 m/s<sup>2</sup>.
* - `n (n > -160 and n <= 0)` to indicate that the vehicle is accelerating towards the right side with regards to the vehicle orientation
* with acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>.
* - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating towards the left hand side with regards to the vehicle orientation
with acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>.
* - `160` for acceleration or greater than 15,9 m/s<sup>2</sup>.
* - `161` when the data is unavailable.
*
* @note: the empty load vehicle is defined in ISO 1176 [i.9], clause 4.6.
* @note: this DF is kept forbackwards compatibility reasons only. It is recommended to use @ref AccelerationValue instead
*
* @unit: 0.1 m/s<sup>2</sup>
* @category Vehicle information
* @revision: Description updated in V2.1.1 (the meaning of 160 has changed slightly). This type is now based on the more generic type AccelerationValue.
*/
LateralAccelerationValue ::= AccelerationValue
/**
* This DE indicates the status of light bar and any sort of audible alarm system besides the horn.
* This includes various common sirens as well as backup up beepers and other slow speed manoeuvring alerts.
*
* The corresponding bit shall be set to 1 under the following conditions:
* - 0 - `lightBarActivated` - when the light bar is activated.
* - 1 - `sirenActivated` - when the siren is activated.
*
* Otherwise, it shall be set to 0.
*
* @category Vehicle information
* @revision: Editorial update in V2.1.1
*/
LightBarSirenInUse ::= BIT STRING {
lightBarActivated (0),
sirenActivated (1)
} (SIZE(2))
/**
* This DE represents the absolute geographical longitude in a WGS84 coordinate system, providing a range of 180 degrees
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
* to the east or to the west of the prime meridian.
*
* The value shall be set to:
* - `n (n > -1800000000 and n < 0)`, i.e. negative values for longitudes to the west.
* - `0` to indicate the prime meridian.
* - `n (n > 0 and n < 1800000001)`, i.e. positive values for longitudes to the east.
* - `1 800 000 001` when the information is unavailable.
*
* The value -1800000000 shall not be used.
*
* @unit: 0.1 microdegree
* @category: GeoReference information
* @revision: Description revised in V2.1.1
*/
Longitude ::= INTEGER {
valueNotUsed (-1800000000),
unavailable (1800000001)
} (-1800000000..1800000001)
/**
* This DE represents the vehicle acceleration at longitudinal direction in the centre of the mass of the empty vehicle.
* It corresponds to the vehicle coordinate system as specified in ISO 8855 [2].
*
* The value shall be set to:
* - `-160` for values equal to or less than -16 m/s<sup>2</sup>.
* - `n (n > -160 and n <= 0)` to indicate that the vehicle is braking with acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>.
* - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating with acceleration equal to or less than n x 0,1 m/s<sup>2</sup>, and greater than (n-1) x 0,1 m/s<sup>2</sup>.
* - `160` for acceleration or greater than 15,9 m/s<sup>2</sup>.
* - `161` when the data is unavailable.
*
* This acceleration is along the tangent plane of the road surface and does not include gravity components.
* @note: this DF is kept forbackwards compatibility reasons only. It is recommended to use @ref AccelerationValue instead
*
* @note: The empty load vehicle is defined in ISO 1176 [i.9], clause 4.6.
* @category: Vehicle information
* @revision: description revised in V2.1.1 (the meaning of 160 has changed slightly). This type is now based on the generic type AccelerationValue.
*/
LongitudinalAccelerationValue::= AccelerationValue
/**
* This DE represents the longitudinal offset of the map-matched position of a particular object along the
* matched lane, beginning from the lane's starting point.
*
* @unit 0,1 m
* @category: Road topology information
* @revision: Created in V2.1.1
*/
LongitudinalLanePositionValue ::= INTEGER (0..32767)
/**
* This DE represents the absolute accuracy of longitudinal lane position measurement to a confidence level of 95%.
*
* The value shall be set to:
* - `n (n > 0 and n < 101)` if the accuracy is equal to or less than n x 0,01 m, and more than (n-1) x 0,01 m.
* - `101` if the acceleration accuracy is out of range i.e. greater than 1 m.
* - `102` if the data is unavailable.
*
* @unit 0,01 meter
* @category: Road topology information
* @revision: Created in V2.1.1
*/
LongitudinalLanePositionConfidence ::= INTEGER {
outOfRange (101),
unavailable (102)
} (0..102)
/**
* This DE represents the type of facility layer message.
*
* The value shall be set to:
* - 1 - `denm` - for Decentralized Environmental Notification Message (DENM) as specified in ETSI EN 302 637-3 [i.3],
* - 2 - `cam` - for Cooperative Awareness Message (CAM) as specified in ETSI EN 302 637-2 [i.2],
* - 3 - `poi` - for Point of Interest message as specified in ETSI TS 101 556-1 [i.11],
* - 4 - `spatem` - for Signal Phase And Timing Extended Message (SPATEM) as specified in ETSI TS 103 301 [i.17],
* - 5 - `mapem` - for MAP Extended Message (MAPEM) as specified in ETSI TS 103 301 [i.17],
* - 6 - `ivim` - for in Vehicle Information Message (IVIM) as specified in ETSI TS 103 301 [i.17],
* - 7 - `ev-rsr` - for Electric vehicle recharging spot reservation message, as defined in ETSI TS 101 556-3 [i.14],
* - 8 - `tistpgtransaction` - for messages for Tyre Information System (TIS) and Tyre Pressure Gauge (TPG) interoperability, as specified in ETSI TS 101 556-2 [i.15],
* - 9 - `srem` - for Signal Request Extended Message as specified in ETSI TS 103 301 [i.17],
* - 10 - `ssem` - for Signal request Status Extended Message as specified in ETSI TS 103 301 [i.17],
* - 11 - `evcsn` - for Electrical Vehicle Charging Spot Notification message as specified in ETSI TS 101 556-1 [i.11],
* - 12 - `saem` - for Services Announcement Extended Message as specified in ETSI EN 302 890-1 [i.19],
* - 13 - `rtcmem` - for Radio Technical Commission for Maritime Services Extended Message (RTCMEM) as specified in ETSI TS 103 301 [i.17],
* - 14 - `cpm` - for Collective Perception Message (CPM) as specified in ETSI TS 103 324 [i.20],
* - 15 - `imzm` - for Interference Management Zone Message (IMZM) as specified in ETSI TS 103 724 [i.13],
* - 16 - `vam` - for Vulnerable Road User Awareness Message as specified in ETSI TS 130 300-3 [i.12],
* - 17 - `dsm` - for Diagnosis, logging and Status Message (DSM) as specified in ETSI TS 103 693 [i.21].
* - 18-255 - reserved for future usage,
*
* @category: Communication information
* @revision: Created in V2.1.1 from @ref ItsPduHeader.
*/
MessageId::= INTEGER {
denm (1),
cam (2),
poi (3),
spatem (4),
mapem (5),
ivim (6),
ev-rsr (7),
tistpgtransaction (8),
srem (9),
ssem (10),
evcsn (11),
saem (12),
rtcmem (13),
cpm (14),
imzm (15),
vam (16),
dsm (17)
} (0..255)
/**
* This DE represents the number of occupants in a vehicle.
*
* The value shall be set to:
* - `n (n > 1 and n < 126)` for the number n of occupants.
* - `126` for values equal to or higher than 126.
* - `127` if information is not available.`.
*
* @unit: 1 person
* @category: Vehicle information
* @revision: Editorial update in V2.1.1
*/
NumberOfOccupants ::= INTEGER {
outOfRange (126),