Newer
Older
zAngle (9),
yAngle (10),
xAngle (11),
zAngleRate (12)
} (SIZE(13,...))
/**
* This DE represents the type of facility layer message.
*
* The value shall be set to:
* - 1 - `denm` - for Decentralized Environmental Notification Message (DENM) as specified in ETSI EN 302 637-3 [i.2],
* - 2 - `cam` - for Cooperative Awareness Message (CAM) as specified in ETSI EN 302 637-2 [i.1],
* - 3 - `poi` - for Point of Interest message as specified in ETSI TS 101 556-1 [i.9],
* - 4 - `spatem` - for Signal Phase And Timing Extended Message (SPATEM) as specified in ETSI TS 103 301 [i.15],
* - 5 - `mapem` - for MAP Extended Message (MAPEM) as specified in ETSI TS 103 301 [i.15],
* - 6 - `ivim` - for in Vehicle Information Message (IVIM) as specified in ETSI TS 103 301 [i.15],
* - 7 - `ev-rsr` - for Electric vehicle recharging spot reservation message, as defined in ETSI TS 101 556-3 [i.11],
* - 8 - `tistpgtransaction` - for messages for Tyre Information System (TIS) and Tyre Pressure Gauge (TPG) interoperability, as specified in ETSI TS 101 556-2 [i.10],
* - 9 - `srem` - for Signal Request Extended Message as specified in ETSI TS 103 301 [i.15],
* - 10 - `ssem` - for Signal request Status Extended Message as specified in ETSI TS 103 301 [i.15],
* - 11 - `evcsn` - for Electrical Vehicle Charging Spot Notification message as specified in ETSI TS 101 556-1 [i.9],
* - 12 - `saem` - for Services Announcement Extended Message as specified in ETSI EN 302 890-1 [i.17],
* - 13 - `rtcmem` - for Radio Technical Commission for Maritime Services Extended Message (RTCMEM) as specified in ETSI TS 103 301 [i.15],
* - 14 - `cpm` - reserved for Collective Perception Message (CPM),
* - 15 - `imzm` - for Interference Management Zone Message (IMZM) as specified in ETSI TS 103 724 [i.13],
* - 16 - `vam` - for Vulnerable Road User Awareness Message as specified in ETSI TS 130 300-3 [i.12],
* - 17 - `dsm` - reserved for Diagnosis, logging and Status Message (DSM).
* - 18 - `pcim` - reserved for Parking Control Infrastructure Message.
* - 19 - `pcvm` - reserved for Parking Control Vehicle Message.
* - 20 - `mcm` - reserved for Manoeuvre Coordination Message.
* - 21 - `pam` - reserved for Parking Availability Message.
* - 22-255 - reserved for future usage.
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
*
* @category: Communication information
* @revision: Created in V2.1.1 from @ref ItsPduHeader.
*/
MessageId::= INTEGER {
denm (1),
cam (2),
poi (3),
spatem (4),
mapem (5),
ivim (6),
ev-rsr (7),
tistpgtransaction (8),
srem (9),
ssem (10),
evcsn (11),
saem (12),
rtcmem (13),
cpm (14),
imzm (15),
vam (16),
dsm (17),
pcim (18),
pcvm (19),
mcm (20),
pam (21)
} (0..255)
/**
* This DE represents the number of occupants in a vehicle.
*
* The value shall be set to:
* - `n (n >= 0 and n < 126)` for the number n of occupants,
* - `126` for values equal to or higher than 126,
* - `127` if information is not available.
*
* @unit: 1 person
* @category: Vehicle information
* @revision: Editorial update in V2.1.1
*/
NumberOfOccupants ::= INTEGER {
outOfRange (126),
unavailable (127)
} (0 .. 127)
/**
* This DE represents a single-value indication about the overall information quality of a perceived object.
*
* The value shall be set to:
* -`0` : if there is no confidence in detected object, e.g. for "ghost"-objects or if confidence could not be computed.
* - `n (n > 0 and n < 15)` : for the applicable confidence value.
* -`15` : if there is full confidence in the detected Object.
*
* @unit n/a
* @category: Sensing information
* @revision: Created in V2.1.1
*/
noConfidence (0),
fullConfidence (15)
} (0..15)
/**
* This DE represents a single dimension of an object.
*
* The value shall be set to:
* - `n (n > 0 and n < 255)` if the accuracy is equal to or less than n x 0,1 m, and more than (n-1) x 0,1 m.
* - `255` if the accuracy is out of range i.e. greater than 25,4 m.
* - `256` if the data is unavailable.
*
* @unit 0,1 m
* @category: Sensing information
* @revision: Created in V2.1.1
*/
ObjectDimensionValue ::= INTEGER {
outOfRange (255),
unavailable (256)
}(1..256)
* This DE indicates the object dimension confidence value which represents the estimated absolute accuracy of an object dimension value with a default confidence level of 95%.
* If required, the confidence level can be defined by the corresponding standards applying this DE.
* - `n (n > 0 and n < 31)` if the confidence value is equal to or less than n x 0,1 metre, and more than (n-1) x 0,1 metre.
* - `31` if the confidence value is out of range i.e. greater than 3,0 m.
* - `32` if the confidence value is unavailable.
* @category: Sensing information
* @revision: Created in V2.1.1
*/
ObjectDimensionConfidence ::= INTEGER {
outOfRange (31),
unavailable (32)
} (1..32)
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
/**
* This DE indicates the face or part of a face of a solid object.
*
* The object is modelled as a rectangular prism that has a length that is greater than its width, with the faces of the object being defined as:
* - front: the face defined by the prism´s width and height, and which is the first face in direction of longitudinal movement of the object.
* - back: the face defined by the prism´s width and height, and which is the last face in direction of longitudinal movement of the object.
* - side: the faces defined by the prism´s length and height with "left" and "right" defined by looking at the front face and "front" and "back" defined w.r.t to the front and back faces.
*
* Note: It is permissible to derive the required object dimensions and orientation from models to provide a best guess.
*
* @category: Basic information
* @revision: V2.1.1
*/
ObjectFace ::= ENUMERATED {
front (0),
sideLeftFront (1),
sideLeftBack (2),
sideRightFront (3),
sideRightBack (4),
back (5)
}
/**
* This DE represents a time period to describe the opening days and hours of a Point of Interest.
* (for example local commerce).
*
* @category: Time information
* @revision: V1.3.1
*/
OpeningDaysHours ::= UTF8String
/**
* The DE represents an ordinal number that indicates the position of an element in a set.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
OrdinalNumber1B ::= INTEGER(0..255)
/**
* The DE represents an ordinal number that indicates the position of an element in a set.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
OrdinalNumber3b ::= INTEGER(1..8)
* This DE indicates the subclass of a detected object for @ref ObjectClass "otherSubclass".
*
* The value shall be set to:
* - `0` - unknown - if the subclass is unknown.
* - `1` - roadSideUnit - if the object is a roadside unit.
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
OtherSubClass ::= INTEGER {
unknown (0),
roadSideUnit (1)
} (0..255)
/**
* This DE represents the recorded or estimated travel time between a position and a predefined reference position.
*
/**
* This DE denotes the ability of an ITS-S to provide up-to-date information.
* A performance class value is used to describe age of data. The exact values are out of scope of the present document.
*
* The value shall be set to:
* - `0` if the performance class is unknown.
* - `1` for performance class A as defined in ETSI TS 101 539-1 [i.5]
* - `2` for performance class B as defined in ETSI TS 101 539-1 [i.5]
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
* - Values in the range `3 to 7` are reserved for future use.
*
* @category: Vehicle information
* @revision: Editorial update in V2.1.1
*/
PerformanceClass ::= INTEGER {
unavailable (0),
performanceClassA (1),
performanceClassB (2)
} (0..7)
/**
* This DE represents a telephone number
*
* @category: Basic information
* @revision: V1.3.1
*/
PhoneNumber ::= NumericString (SIZE(1..16))
/**
* This DE indicates the perpendicular distance from the centre of mass of an empty load vehicle to the front line of
* the vehicle bounding box of the empty load vehicle.
*
* The value shall be set to:
* - `n (n > 0 and n < 62)` for any aplicable value n between 0,1 metre and 6,2 metres.
* - `62` for values equal to or higher than `6.1 metres`.
* @note: The empty load vehicle is defined in ISO 1176 [i.8], clause 4.6.
*
* @unit 0,1 metre
* @category Vehicle information
* @revision: description revised in V2.1.1 (the meaning of 62 has changed slightly)
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
outOfRange (62),
unavailable (63)
} (1..63)
/**
* This DE indicates the positioning technology being used to estimate a geographical position.
*
* The value shall be set to:
* - 0 `noPositioningSolution` : no positioning solution used,
* - 1 `sGNSS` : Global Navigation Satellite System used,
* - 2 `dGNSS` : Differential GNSS used,
* - 3 `sGNSSplusDR` : GNSS and dead reckoning used,
* - 4 `dGNSSplusDR` : Differential GNSS and dead reckoning used,
* - 5 `dR` : dead reckoning used.
*
* @category: GeoReference information
* @revision: V1.3.1
*/
PositioningSolutionType ::= ENUMERATED {
noPositioningSolution (0),
sGNSS (1),
dGNSS (2),
sGNSSplusDR (3),
dGNSSplusDR (4),
dR (5),
...
}
/**
* This DE indicates whether a passenger seat is occupied or whether the occupation status is detectable or not.
*
* The number of row in vehicle seats layout is counted in rows from the driver row backwards from front to the rear
* of the vehicle.
* The left side seat of a row refers to the left hand side seen from vehicle rear to front.
* Additionally, a bit is reserved for each seat row, to indicate if the seat occupation of a row is detectable or not,
* i.e. `row1NotDetectable (3)`, `row2NotDetectable(8)`, `row3NotDetectable(13)` and `row4NotDetectable(18)`.
* Finally, a bit is reserved for each row seat to indicate if the seat row is present or not in the vehicle,
* i.e. row1NotPresent `(4)`, row2NotPresent `(9)`, `row3NotPresent(14)`, `row4NotPresent(19)`.
*
* When a seat is detected to be occupied, the corresponding seat occupation bit shall be set to `1`.
* For example, when the row 1 left seat is occupied, `row1LeftOccupied(0)` bit shall be set to 1.
* When a seat is detected to be not occupied, the corresponding seat occupation bit shall be set to `0`.
* Otherwise, the value of seat occupation bit shall be set according to the following conditions:
* - If the seat occupation of a seat row is not detectable, the corresponding bit shall be set to `1`.
* When any seat row not detectable bit is set to `1`, all corresponding seat occupation bits of the same row
* shall be set to `1`.
* - If the seat row is not present, the corresponding not present bit of the same row shall be set to `1`.
* When any of the seat row not present bit is set to `1`, the corresponding not detectable bit for that row
* shall be set to `1`, and all the corresponding seat occupation bits in that row shall be set to `0`.
*
* @category: Vehicle information
* @revision: V1.3.1
*/
PositionOfOccupants ::= BIT STRING {
row1LeftOccupied (0),
row1RightOccupied (1),
row1MidOccupied (2),
row1NotDetectable (3),
row1NotPresent (4),
row2LeftOccupied (5),
row2RightOccupied (6),
row2MidOccupied (7),
row2NotDetectable (8),
row2NotPresent (9),
row3LeftOccupied (10),
row3RightOccupied (11),
row3MidOccupied (12),
row3NotDetectable (13),
row3NotPresent (14),
row4LeftOccupied (15),
row4RightOccupied (16),
row4MidOccupied (17),
row4NotDetectable (18),
row4NotPresent (19)
} (SIZE(20))
/**
* This DE indicates the perpendicular distance between the vehicle front line of the bounding box and the front wheel axle in 0,1 metre.
* - `n (n > 0 and n < 19) for any aplicable value between 0,1 metre and 1,9 metres.
* - `19` for values equal to or higher than 1.8 metres.
* - `20` if the information is unavailable.
*
* @category: Vehicle information
* @unit 0,1 metre
* @revision: description revised in V2.1.1 (the meaning of 19 has changed slightly)
*/
PosFrontAx ::= INTEGER {
outOfRange (19),
unavailable(20)
} (1..20)
/**
* This DE represents the distance from the centre of vehicle front bumper to the right or left longitudinal carrier of vehicle.
* The left/right carrier refers to the left/right as seen from a passenger sitting in the vehicle.
*
* The value shall be set to:
* - `n (n > 0 and n < 126)` for any aplicable value between 0,01 metre and 1,26 metres.
* - `126` for values equal to or higher than 1.25 metres.
* - `127` if the information is unavailable.
*
* @unit 0,01 metre
* @category Vehicle information
* @revision: description revised in V2.1.1 (the meaning of 126 has changed slightly)
*/
PosLonCarr ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
/**
* This DE represents the perpendicular inter-distance of neighbouring pillar axis of vehicle starting from the
* middle point of the front line of the vehicle bounding box.
*
* The value shall be set to:
* - `n (n > 0 and n < 29)` for any aplicable value between 0,1 metre and 2,9 metres.
* - `29` for values equal to or greater than 2.8 metres.
* - `30` if the information is unavailable.
*
* @unit 0,1 metre
* @category Vehicle information
* @revision: description revised in V2.1.1 (the meaning of 29 has changed slightly)
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
*/
PosPillar ::= INTEGER {
outOfRange (29),
unavailable (30)
} (1..30)
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode `postCrash` .
*
* The value shall be set to:
* - 0 `unavailable` : in case further detailed information on post crash event is unavailable,
* - 1 `accidentWithoutECallTriggered` : in case no eCall has been triggered for an accident,
* - 2 `accidentWithECallManuallyTriggered` : in case eCall has been manually triggered and transmitted to eCall back end,
* - 3 `accidentWithECallAutomaticallyTriggered` : in case eCall has been automatically triggered and transmitted to eCall back end,
* - 4 `accidentWithECallTriggeredWithoutAccessToCellularNetwork` : in case eCall has been triggered but cellular network is not accessible from triggering vehicle,
* - 5-255 : reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
PostCrashSubCauseCode ::= INTEGER {
unavailable (0),
accidentWithoutECallTriggered (1),
accidentWithECallManuallyTriggered (2),
accidentWithECallAutomaticallyTriggered (3),
accidentWithECallTriggeredWithoutAccessToCellularNetwork (4)
} (0..255)
/**
* This DE represent the total amount of rain falling during one hour. It is measured in mm per hour at an area of 1 square metre.
* - `n (n > 0 and n < 2000)` if the amount of rain falling is equal to or less than n x 0,1 mm/h and greater than (n-1) x 0,1 mm/h.
* - `2000` if the amount of rain falling is greater than 199.9 mm/h
* - `2001` if the information is not available
*
* @category: Basic Information
* @revision: created in V2.1.1
*/
PrecipitationIntensity ::= INTEGER {
outOfRange (2000),
unavailable (2001)
} (1..2001)
/**
* This DE represents the indentifier of a protected communication zone.
*
*
* @category: Infrastructure information, Communication information
* @revision: Revision in V2.1.1 (changed name from ProtectedZoneID to ProtectedZoneId)
* This DE represents the radius of a protected communication zone.
*
*
* @unit: metre
* @category: Infrastructure information, Communication information
* @revision: V1.3.1
*/
ProtectedZoneRadius ::= INTEGER (1..255,...)
/**
* This DE indicates the type of a protected communication zone, so that an ITS-S is aware of the actions to do
* while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station).
*
* The protected zone type is defined in ETSI TS 102 792 [i.14].
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
*
*
* @category: Communication information
* @revision: V1.3.1
*/
ProtectedZoneType::= ENUMERATED {
permanentCenDsrcTolling (0),
...,
temporaryCenDsrcTolling (1)
}
/**
* This DE is used for various tasks in the public transportation environment, especially for controlling traffic
* signal systems to prioritize and speed up public transportation in urban area (e.g. intersection "_bottlenecks_").
* The traffic lights may be controlled by an approaching bus or tram automatically. This permits "_In Time_" activation
* of the green phase, will enable the individual traffic to clear a potential traffic jam in advance. Thereby the
* approaching bus or tram may pass an intersection with activated green light without slowing down the speed due to
* traffic congestion. Other usage of the DE is the provision of information like the public transport line number
* or the schedule delay of a public transport vehicle.
*
* @category: Vehicle information
* @revision: V1.3.1
*/
PtActivationData ::= OCTET STRING (SIZE(1..20))
/**
* This DE indicates a certain coding type of the PtActivationData data.
*
* The folowing value are specified:
* - `0` undefinedCodingType : undefined coding type,
* - `1` r09-16CodingType : coding of PtActivationData conform to VDV recommendation 420 [i.7],
* - `2` vdv-50149CodingType : coding of PtActivationData based on VDV recommendation 420 [i.7].
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
* - values 3 to 255 : reserved for alternative and future use.
*
* @category: Vehicle information
* @revision: V1.3.1
*/
PtActivationType ::= INTEGER {
undefinedCodingType (0),
r09-16CodingType (1),
vdv-50149CodingType (2)
} (0..255)
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode `railwayLevelCrossing` .
*
* The value shall be set to:
* - 0 `unavailable` : in case no further detailed information on the railway level crossing status is available,
* - 1 `doNotCrossAbnormalSituation` : in case when something wrong is detected by equation or sensors of the railway level crossing,
including level crossing is closed for too long (e.g. more than 10 minutes long ; default value),
* - 2 `closed` : in case the crossing is closed (barriers down),
* - 3 `unguarded` : in case the level crossing is unguarded (i.e a Saint Andrew cross level crossing without detection of train),
* - 4 `nominal` : in case the barriers are up and lights are off.
* - 5-255: reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
RailwayLevelCrossingSubCauseCode ::= INTEGER {
unavailable (0),
doNotCrossAbnormalSituation (1),
closed (2),
unguarded (3),
nominal (4)
} (0..255)
/**
* This DE describes a distance of relevance for information indicated in a message.
*
* The value shall be set to:
* - 0 `lessThan50m` : for distances below 50 m.
* - 1 `lessThan100m` : for distances below 100 m.
* - 2 `lessThan200m` : for distances below 200 m.
* - 3 `lessThan500m` : for distances below 300 m.
* - 4 `lessThan1000m` : for distances below 1 000 m.
* - 5 `lessThan5km` : for distances below 5 000 m.
* - 6 `lessThan10km` : for distances below 10 000 m.
* - 7 `over10km` : for distances over 10 000 m.
* @note: this DE is kept for backwards compatibility reasons only. It is recommended to use the @ref StandardLength3b instead.
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
*
* @category: GeoReference information
* @revision: Editorial update in V2.1.1
*/
RelevanceDistance ::= ENUMERATED {
lessThan50m(0),
lessThan100m(1),
lessThan200m(2),
lessThan500m(3),
lessThan1000m(4),
lessThan5km(5),
lessThan10km(6),
over10km(7)
}
/**
* This DE indicates a traffic direction that is relevant to information indicated in a message.
*
* The value shall be set to:
* - 0 `allTrafficDirections` : for all traffic directions.
* - 1 `upstreamTraffic` : for upstream traffic.
* - 2 `downstreamTraffic` : for downstream traffic.
* - 3 `oppositeTraffic` : for traffic in the opposite direction.
*
* The terms `upstream`, `downstream` and `oppositeTraffic` are relative to the event position.
*
* @note: Upstream traffic corresponds to the incoming traffic towards the event position,
* and downstream traffic to the departing traffic away from the event position.
*
* @note: this DE is kept for backwards compatibility reasons only. It is recommended to use the @ref TrafficDirection instead.
*
* @category: GeoReference information
* @revision: Editorial update in V2.1.1
*/
RelevanceTrafficDirection ::= ENUMERATED {
allTrafficDirections(0),
upstreamTraffic(1),
downstreamTraffic(2),
oppositeTraffic(3)
}
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
/**
* This DE indicates whether an ITS message is transmitted as request from ITS-S or a response transmitted from
* ITS-S after receiving request from other ITS-Ss.
*
* The value shall be set to:
* - 0 `request` : for a request message.
* - 1 `response` : for a response message.
*
* @category Communication information
* @revision: Editorial update in V2.1.1
*/
RequestResponseIndication ::= ENUMERATED {
request (0),
response (1)
}
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode `rescueAndRecoveryWorkInProgress`
*
* The following value are specified:
* - 0 `unavailable` : in case further detailed information on rescue and recovery work is unavailable,
* - 1 `emergencyVehicles` : in case rescue work is ongoing by emergency vehicles,
* - 2 `rescueHelicopterLanding` : in case rescue helicopter is landing,
* - 3 `policeActivityOngoing` : in case police activity is ongoing,
* - 4 `medicalEmergencyOngoing` : in case medical emergency recovery is ongoing,
* - 5 `childAbductionInProgress`: in case a child kidnapping alarm is activated and rescue work is ongoing,
* - 6-255: reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
RescueAndRecoveryWorkInProgressSubCauseCode ::= INTEGER {
unavailable (0),
emergencyVehicles (1),
rescueHelicopterLanding (2),
policeActivityOngoing (3),
medicalEmergencyOngoing (4),
childAbductionInProgress (5)
} (0..255)
/**
* This DE indicates the type of a road segment.
*
* The value shall be set to:
* - 0 `urban-NoStructuralSeparationToOppositeLanes` : for an urban road with no structural separation between lanes carrying traffic in opposite directions.
* - 1 `urban-WithStructuralSeparationToOppositeLanes` : for an urban road with structural separation between lanes carrying traffic in opposite directions.
* - 2 `nonUrban-NoStructuralSeparationToOppositeLanes` : for an non urban road with no structural separation between lanes carrying traffic in opposite directions.
* - 3 `nonUrban-WithStructuralSeparationToOppositeLanes` : for an non urban road with structural separation between lanes carrying traffic in opposite directions.
*
* @category: Road Topology Information
* @revision: Editorial update in V2.1.1
*/
RoadType ::= ENUMERATED {
urban-NoStructuralSeparationToOppositeLanes (0),
urban-WithStructuralSeparationToOppositeLanes (1),
nonUrban-NoStructuralSeparationToOppositeLanes (2),
nonUrban-WithStructuralSeparationToOppositeLanes (3)
}
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode `roadworks`.
*
The value shall be set to:
* - 0 `unavailable` : in case further detailed information on roadworks is unavailable,
* - 1 `majorRoadworks` : in case a major roadworks is ongoing,
* - 2 `roadMarkingWork` : in case a road marking work is ongoing,
* - 3 `slowMovingRoadMaintenance` : in case slow moving road maintenance work is ongoing,
* - 4 `shortTermStationaryRoadworks`: in case a short term stationary roadwork is ongoing,
* - 5 `streetCleaning` : in case a vehicle street cleaning work is ongoing,
* - 6 `winterService` : in case winter service work is ongoing,
* - 7-255 reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
RoadworksSubCauseCode ::= INTEGER {
unavailable (0),
majorRoadworks (1),
roadMarkingWork (2),
slowMovingRoadMaintenance (3),
shortTermStationaryRoadworks (4),
streetCleaning (5),
winterService (6)
} (0..255)
/**
* The value shall be set to:
* - `FALSE` if the triple {LaD, LoD, VD} < {MSLaD, MSLoD, MSVD} is simultaneously satisfied with confidence level of 90 % or more.
* - `TRUE` otherwise.
*
* @note: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD)
* and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD)
*
* @category: Traffic information, Kinematics information
* @revision: created in V2.1.1
*/
SafeDistanceIndicator::= BOOLEAN
/**
* This DE indicates the horizontal position confidence value which represents the estimated absolute position accuracy, in one of the axis direction as defined in a shape of ellipse with a
* confidence level of 95 %.
*
* The value shall be set to:
* - `n (n > 0 and n < 4 094)` if the accuracy is equal to or less than n * 0,01 metre,
* - `4 094` if the accuracy is out of range, i.e. greater than 4,093 m,
* @note: The fact that a position coordinate value is received with confidence value set to 'unavailable(4095)'
* can be caused by several reasons, such as:
* - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
* - the sensor cannot calculate the accuracy due to lack of variables, or
* - there has been a vehicle bus (e.g. CAN bus) error.
* In all 3 cases above, the position coordinate value may be valid and used by the application.
* If a position coordinate value is received and its confidence value is set to 'outOfRange(4094)', it means that
* the position coordinate value is not valid and therefore cannot be trusted. Such value is not useful
outOfRange (4094),
unavailable (4095)
} (0..4095)
/**
* This DE indicates the type of sensor.
*
* The value shall be set to:
* - `0` undefined : in case the sensor type is undefined.
* - `1` radar : in case the sensor is a radar.
* - `2` lidar : in case the sensor is a lidar.
* - `3` monovideo : in case the sensor is mono video.
* - `4` stereovision : in case the sensor is stereo vision.
* - `5` nightvision : in case the sensor is night vision.
* - `6` ultrasonic : in case the sensor is ultrasonic.
* - `7` pmd : in case the sensor is photonic mixing device.
* - `8` inductionLoop : in case the sensor is an induction loop.
* - `9` sphericalCamera : in case the sensor is a spherical camera.
* - `10` uwb : in case the sensor is ultra wide band.
* - `11` acoustic : in case the sensor is acoustic.
* - `12` localAggregation : in case the information is provided by a system that aggregates information from different local sensors. Aggregation may include fusion.
* - `13` itsAggregation : in case the information is provided by a system that aggregates information from other received ITS messages.
*
* @category: Sensing Information
* @revision: created in V2.1.1
*/
SensorType ::= INTEGER {
undefined (0),
radar (1),
lidar (2),
monovideo (3),
stereovision (4),
nightvision (5),
ultrasonic (6),
pmd (7),
inductionLoop (8),
sphericalCamera (9),
uwb (10),
acoustic (11),
localAggregation (12),
itsAggregation (13)
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
/**
* This DE represents a sequence number.
*
* @category: Basic information
* @revision: V1.3.1
*/
SequenceNumber ::= INTEGER (0..65535)
/**
* This DE represents the value of the sub cause codes of the @ref CauseCode `signalViolation`.
*
* The value shall be set to:
* - 0 `unavailable` : in case further detailed information on signal violation event is unavailable,
* - 1 `stopSignViolation` : in case a stop sign violation is detected,
* - 2 `trafficLightViolation` : in case a traffic light violation is detected,
* - 3 `turningRegulationViolation`: in case a turning regulation violation is detected,
* - 4-255 : reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
SignalViolationSubCauseCode ::= INTEGER {
unavailable (0),
stopSignViolation (1),
trafficLightViolation (2),
turningRegulationViolation (3)
} (0..255)
/**
* This DE represents the sub cause codes of the @ref CauseCode "slowVehicle".
*
* The value shall be set to:
* - 0 `unavailable` : in case further detailed information on slow vehicle driving event is
* unavailable,
* - 1 `maintenanceVehicle` : in case of a slow driving maintenance vehicle on the road,
* - 2 `vehiclesSlowingToLookAtAccident`: in case vehicle is temporally slowing down to look at accident, spot, etc.,
* - 3 `abnormalLoad` : in case an abnormal loaded vehicle is driving slowly on the road,
* - 4 `abnormalWideLoad` : in case an abnormal wide load vehicle is driving slowly on the road,
* - 5 `convoy` : in case of slow driving convoy on the road,
* - 6 `snowplough` : in case of slow driving snow plough on the road,
* - 7 `deicing` : in case of slow driving de-icing vehicle on the road,
* - 8 `saltingVehicles` : in case of slow driving salting vehicle on the road,
* - 9-255 : reserved for future usage.
*
* @category: Traffic information
* @revision: V1.3.1
*/
SlowVehicleSubCauseCode ::= INTEGER {
unavailable (0),
maintenanceVehicle (1),
vehiclesSlowingToLookAtAccident (2),
abnormalLoad (3),
abnormalWideLoad (4),
convoy (5),
snowplough (6),
deicing (7),
saltingVehicles (8)
} (0..255)
/**
* The DE indicates if a vehicle is carrying goods in the special transport conditions.
* The corresponding bit shall be set to 1 under the following conditions:
* - 0 `heavyLoad` : the vehicle is carrying goods with heavy load.
* - 1 `excessWidth` : the vehicle is carrying goods in excess of width.
* - 2 `excessLength` : the vehicle is carrying goods in excess of length.
* - 3 `excessHeight` : the vehicle is carrying goods in excess of height.
*
* Otherwise, the corresponding bit shall be set to 0.
* @category Vehicle information
* @revision: Description revised in V2.1.1
*/
SpecialTransportType ::= BIT STRING {
heavyLoad (0),
excessWidth (1),
excessLength (2),
excessHeight (3)
} (SIZE(4))
/**
* This DE indicates the speed confidence value which represents the estimated absolute accuracy of a speed value with a default confidence level of 95%.
* If required, the confidence level can be defined by the corresponding standards applying this DE.
* - `n (n > 0 and n < 126)` if the confidence value is equal to or less than n * 0,01 m/s.
* - `126` if the confidence value is out of range, i.e. greater than 1,25 m/s.
* - `127` if the confidence value information is not available.
* @note: The fact that a speed value is received with confidence value set to `unavailable(127)` can be caused by several reasons, such as:
* - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
* - the sensor cannot calculate the accuracy due to lack of variables, or
* - there has been a vehicle bus (e.g. CAN bus) error.
* In all 3 cases above, the speed value may be valid and used by the application.
* @note: If a speed value is received and its confidence value is set to `outOfRange(126)`, it means that the speed value is not valid
* and therefore cannot be trusted. Such is not useful for the application.
*
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
* @category: Vehicle information
* @revision: Description revised in V2.1.1
*/
SpeedConfidence ::= INTEGER {
outOfRange (126),
unavailable (127)
} (1..127)
/**
* This DE represents a speed limitation applied to a geographical position, a road section or a geographical region.
*
* @unit: km/h
* @category: Infrastructure information, Traffic information
* @revision: V1.3.1
*/
SpeedLimit ::= INTEGER (1..255)
/**
* This DE represents a speed value, i.e. the magnitude of the horizontal velocity-vector.
*
* The value shall be set to:
* - `0` in a standstill situation.
* - `n (n > 0 and n < 16382)` if the applicable value is equal to or less than n x 0,01 m/s, and greater than (n-1) x 0,01 m/s.
* - `16382` for speed values greater than 163,81 m/s.
* - `16383` if the speed accuracy information is not available.
*
* @note: the the definition of standstill is out of scope of this document.
*
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
* @unit: 0,01 m/s
* @category: Kinematics information
* @revision: Description revised in V2.1.1 (the meaning of 16382 has changed slightly)
*/
SpeedValue ::= INTEGER {
standstill (0),
outOfRange (16382),
unavailable (16383)
} (0..16383)
/**
* This DE represents the value of a velocity component in a defined coordinate system.
*
* The value shall be set to:
* - `-16383` if the speed is equal to or smaller than -163,83 m/s
* - `n (n > -16383 and n < 16382)` if the applicable value is equal to or less than n x 0,01 m/s, and greater than `(n-1) x 0,01 m/s.
* - `16382` for speed values equal to or greater than 163,81 m/s.
* - `16383` if the speed accuracy information is not available.
*
* @unit: 0,01 m/s
* @category: Kinematics information
* @revision: Created in V2.1.1
*/
SpeedValueExtended ::= INTEGER {
negativeOutOfRange (-16383),
psotiveOutOfRange (16382),
unavailable (16383)
} (-16383..16383)
/**
* This DE indicates the estimated probability of a stability level and conversely also the probability of a stability loss.
*
* The value shall be set to:
* - `0` to indicate an estimated probability of a loss of stability of 0%, i.e. "stable".
* - `n (n > 0 and n < 50)` to indicate the actual stability level.
* - `50` to indicate a estimated probability of a loss of stability of 100%, i.e. "total loss of stability".
* - the values between 51 and 62 are reserved for future use.
* - `63`: this value indicates that the information is unavailable.
*
* @unit: 2%
* @category: Kinematics information
* @revision: Created in V2.1.1
*/
StabilityLossProbability ::= INTEGER {
stable (0),
totalLossOfStability (50),
unavailable (63)
} (0..63)
/**
* The DE represents length as a measure of distance between points or as a dimension of an object or shape.
* @category: Basic information
* @revision: Created in V2.1.1
*/
StandardLength12b::= INTEGER (0..4095)
/**
* The DE represents length as a measure of distance between points.
*
* The value shall be set to:
* - 0 `lessThan50m` : for distances below 50 m.
* - 1 `lessThan100m` : for distances below 100 m.
* - 2 `lessThan200m` : for distances below 200 m.
* - 3 `lessThan500m` : for distances below 300 m.
* - 4 `lessThan1000m` : for distances below 1 000 m.
* - 5 `lessThan5km` : for distances below 5 000 m.
* - 6 `lessThan10km` : for distances below 10 000 m.
* - 7 `over10km` : for distances over 10 000 m.
* @revision: Created in V2.1.1 from RelevanceDistance
*/
StandardLength3b ::= ENUMERATED {
lessThan50m (0),
lessThan100m (1),
lessThan200m (2),
lessThan500m (3),
lessThan1000m (4),
lessThan5km (5),
lessThan10km (6),
over10km (7)
}
/**
* The DE represents length as a measure of distance between points or as a dimension of an object.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
StandardLength9b::= INTEGER (0..511)
/**
* The DE represents length as a measure of distance between points or as a dimension of an object.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
StandardLength1B::= INTEGER (0..255)
/**
* The DE represents length as a measure of distance between points or as a dimension of an object.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
StandardLength2B::= INTEGER (0..65535)
/**
* This DE indicates the duration in minutes since which something is stationary.
*
* The value shall be set to:
* - 0 `lessThan1Minute` : for being stationary since less than 1 minute.
* - 1 `lessThan2Minutes` : for being stationary since less than 2 minute and for equal to or more than 1 minute.
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
* - 2 `lessThan15Minutes` : for being stationary since less than 15 minutes and for equal to or more than 1 minute.
* - 3 `equalOrGreater15Minutes` : for being stationary since equal to or more than 15 minutes.
*
* @category: Kinematics information
* @revision: Created in V2.1.1
*/
StationarySince ::= ENUMERATED {
lessThan1Minute (0),
lessThan2Minutes (1),
lessThan15Minutes (2),
equalOrGreater15Minutes (3)
}
/**
* This DE provides the value of the sub cause codes of the @ref CauseCode "stationaryVehicle".
*
* The value shall be set to:
* - 0 `unavailable` : in case further detailed information on stationary vehicle is unavailable,
* - 1 `humanProblem` : in case stationary vehicle is due to health problem of driver or passenger,
* - 2 `vehicleBreakdown` : in case stationary vehicle is due to vehicle break down,
* - 3 `postCrash` : in case stationary vehicle is caused by collision,
* - 4 `publicTransportStop` : in case public transport vehicle is stationary at bus stop,
* - 5 `carryingDangerousGoods`: in case the stationary vehicle is carrying dangerous goods,
* - 6 `vehicleOnFire` : in case of vehicle on fire.
* - 7-255 reserved for future usage.