Updated doc for SOL005 NSD mgmt (!37) · Merge requests · NFV - Network Functions Virtualisation / api-tests

SOL003/VNFFaultManagement-API/environment/variables.txt

+11 −1

Changes for SOL003/VNFFaultManagement-API/environment/variables.txt: 11 added lines, 1 removed line.
Original line number	Diff line number	Diff line
		@@ -25,9 +25,19 @@ ${apiRoot} /
		${apiName} vnffm
		${apiVersion} v1


		${subscriptionId} 6fc3539c-e602-4afa-8e13-962fb5a7d81f

		${AlarmNotification} {}
		${AlarmClearedNotification} {}
		${AlarmListRebuiltNotification} {}

		${subscriptionId} 6fc3539c-e602-4afa-8e13-962fb5a7d81f
		${response} {}

		${req_mock} {}
		${resp_mock} {}

		${alarm_filter} nsInstanceId
		${nsInstanceId} 007c111c-38a1-42c0-a666-7475ecb1567c
		${invalid_alarm_filter} badFilter
		${invalidAlarmId} invalidIdAlarm
		No newline at end of file

SOL003/VNFFaultManagement-API/Alarms.robot

+69 −73

Changes for SOL003/VNFFaultManagement-API/Alarms.robot: 69 added lines, 73 removed lines.
Original line number	Diff line number	Diff line
		* Settings *
		# Suite setup Expect spec SOL003-VNFLifecycleManagement-API.yaml
		Resource environment/variables.txt
		Resource FaultManagement-APIKeyword.robot
		Library REST ${VNFM_SCHEMA}://${VNFM_HOST}:${VNFM_PORT}
		Library JSONLibrary
		Library JSONSchemaLibrary schemas/
		Library OperatingSystem


		* Test Cases *
		POST Alarms - Method not implemented
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Post ${apiRoot}/${apiName}/${apiVersion}/alarms
		Log Validate Status code
		Integer response status 405
		[Documentation] Test ID: 7.3.5.1.1
		... Test title: POST Alarms - Method not implemented
		... Test objective: The objective is to test that Post method is not allowed to create Fault management alarms on VNF
		... Pre-conditions: none
		... Reference: section 7.4.2.3.1 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Send POST request for fault management Alarms
		Check HTTP Response Status Code Is 405

		Get information about multiple alarms
		[Documentation] Test ID: 7.4.2.1
		[Documentation] Test ID: 7.3.5.1.2
		... Test title: Get information about multiple alarms
		... Test objective: The objective is to retrieve information about the alarm list
		... Pre-conditions:
		... Reference: section 7.4.2 - SOL003 v2.4.1
		... Test objective: The objective is to retrieve information about the alarm list and perform a JSON schema and content validation of the returned alarms data structure
		... Pre-conditions: none
		... Reference: section 7.4.2.3.2 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions:
		Log Query VNF The GET method queries information about multiple alarms.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query and validate response
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms
		Log Validate Status code
		Integer response status 200
		${contentType}= Output response headers Content-Type
		Should Contain ${contentType} ${CONTENT_TYPE}
		${result}= Output response body
		Validate Json Alarms.schema.json ${result}
		Log Validation OK
		... Applicability: none
		... Post-Conditions: none
		GET Fault Management Alarms
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is Alarms

		Get information about multiple alarms with filters
		[Documentation] Test ID: 7.4.2.2
		... Test title: Get information about multiple alarms - with filters
		... Test objective: The objective is to retrieve information about the alarm list
		... Pre-conditions:
		... Reference: section 7.4.2 - SOL003 v2.4.1
		[Documentation] Test ID: 7.3.5.1.2
		... Test title: Get information about multiple alarms with filters
		... Test objective: The objective is to retrieve information about the alarm list and perform a JSON schema and content validation of the returned alarms data structure, and verify that the retrieved information matches the issued attribute-based filters
		... Pre-conditions: none
		... Reference: section 7.4.2.3.2 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions:
		Log Query VNF The GET method queries information about multiple alarms with filters.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query and validate response
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms?${alarm_filter}=${managedObjectId}
		Log Validate Status code
		Integer response status 200
		${contentType}= Output response headers Content-Type
		Should Contain ${contentType} ${CONTENT_TYPE}
		${result}= Output response body
		Validate Json Alarms.schema.json ${result}
		Log Validation OK
		... Applicability: none
		... Post-Conditions: none
		GET Fault Management Alarms With Filters
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is Alarms

		Get information about multiple alarms Bad Request Invalid attribute-based filtering parameters
		[Documentation] Test ID: 7.4.2.2-1
		... Test title: Get information about multiple alarms - with Invalid attribute-based filtering parameters
		[Documentation] Test ID: 7.3.5.1.2
		... Test title: The objective is to try to retrieve information about the alarm list and perform a JSON schema and content validation of the returned problem details data structure, and verify that the retrieved information matches the issued attribute-based filters
		... Test objective: The objective is to retrieve information about the alarm list
		... Pre-conditions:
		... Reference: section 7.4.2 - SOL003 v2.4.1
		... Reference: section 7.4.2.3.2 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions:
		Log Query VNF The GET method queries information about multiple alarm instances.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms?${invalid_alarm_filter}=${managedObjectId}
		Log Validate Status code
		Integer response status 400
		${problemDetails}= Output response body
		Validate Json ProblemDetails.schema.json ${problemDetails}
		Log Validation OK
		GET Fault Management Alarms With Invalid Filters
		Check HTTP Response Status Code Is 400
		Check HTTP Response Body Json Schema Is ProblemDetails

		PUT Alarms - Method not implemented
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Put ${apiRoot}/${apiName}/${apiVersion}/alarms
		Log Validate Status code
		Integer response status 405
		[Documentation] Test ID: 7.3.5.1.3
		... Test title: PUT Alarms - Method not implemented
		... Test objective: The objective is to test that PUT method is not allowed to for Fault management alarms on VNF
		... Pre-conditions: none
		... Reference: section 7.4.2.3.3 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		PUT Fault management Alarms
		Check HTTP Response Status Code Is 405

		PATCH Alarms - Method not implemented
		log Trying to perform a PATCH. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms
		Log Validate Status code
		Integer response status 405
		[Documentation] Test ID: 7.3.5.1.4
		... Test title: PATCH Alarms - Method not implemented
		... Test objective: The objective is to test that PATCH method is not allowed to for Fault management alarms on VNF
		... Pre-conditions: none
		... Reference: section 7.4.2.3.4 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		PATCH Fault management Alarms
		Check HTTP Response Status Code Is 405

		DELETE Alarms - Method not implemented
		log Trying to perform a DELETE. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Delete ${apiRoot}/${apiName}/${apiVersion}/alarms
		Log Validate Status code
		Integer response status 405
		[Documentation] Test ID: 7.3.5.1.5
		... Test title: POST Alarms - Method not implemented
		... Test objective: The objective is to test that DELETE method is not allowed for Fault management alarms on VNF
		... Pre-conditions: none
		... Reference: section 7.4.2.3.5 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		DELETE Fault management Alarms
		Check HTTP Response Status Code Is 405
		Check Postcondition VNF fault management alarms Exists

		No newline at end of file

SOL003/VNFFaultManagement-API/FaultManagement-APIKeyword.robot

0 → 100644

+289 −0

Changes for SOL003/VNFFaultManagement-API/FaultManagement-APIKeyword.robot: 289 added lines, 0 removed lines.
Original line number	Diff line number	Diff line
		* Settings *
		Resource environment/variables.txt
		Library REST ${NFVO_SCHEMA}://${NFVO_HOST}:${NFVO_PORT}
		Library JSONLibrary
		Library JSONSchemaLibrary schemas/
		Library OperatingSystem
		#Suite Teardown Terminate All Processes kill=true

		Library Process

		* Variables *
		${original_etag} 1234

		* Keywords *
		Check Postcondition VNF fault management alarms Exists
		Log Checking that alarms exists
		GET Fault Management Alarms
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is Alarms

		Check Postcondition VNF fault management individual alarm Exists
		Log Checking that individual alarm exists
		GET Fault Management Individual Alarm
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is alarm

		Check Individual Subscription existance
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Get ${apiRoot}/${apiName}/${apiVersion}/subscriptions/${subscriptionId}
		Integer response status 200

		Check HTTP Response Status Code Is
		[Arguments] ${expected_status}
		Log Validate Status code
		Should Be Equal ${response[0]['status']} ${expected_status}
		Log Status code validated

		Check HTTP Response Header Contains
		[Arguments] ${HEADER_TOCHECK}
		Should Contain ${response[0]['headers']} ${HEADER_TOCHECK}
		Log Header is present

		Check HTTP Response Body Json Schema Is
		[Arguments] ${input}
		${schema} = Catenate ${input} .schema.json
		Validate Json ${schema} ${response[0]['body']}
		Log Json Schema Validation OK

		Check HTTP Response Header ContentType is
		[Arguments] ${expected_contentType}
		Log Validate content type
		Should Be Equal ${response[0]['headers']['Content-Type']} ${expected_contentType}
		Log Content Type validated

		Send POST request for fault management Alarms
		log Trying to perform a POST. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Post ${apiRoot}/${apiName}/${apiVersion}/alarms
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		PATCH Fault management Alarms
		log Trying to perform a PATCH. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms
		${outputResponse} = Output response
		Set Global Variable @{response} ${outputResponse}

		PUT Fault management Alarms
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Put ${apiRoot}/${apiName}/${apiVersion}/alarms
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		DELETE Fault management Alarms
		log Trying to perform a DELETE. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Delete ${apiRoot}/${apiName}/${apiVersion}/alarms
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		GET Fault Management Alarms
		Log Query NFVO The GET method queries information about multiple alarms.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		GET Fault Management Alarms With Filters
		Log Query NFVO The GET method queries information about multiple alarms with filters.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms?${alarm_filter}=${nsInstanceId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		GET Fault Management Alarms With Invalid Filters
		Log Query NFVO The GET method queries information about multiple alarms with filters.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms?${invalid_alarm_filter}=${nsInstanceId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Send POST request for fault management Individual Alarm
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Post ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		DELETE Fault Management Individual Alarm
		log Trying to perform a DELETE. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Delete ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		PUT Fault Management Individual Alarm
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Put ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		GET Fault Management Individual Alarm
		Log Query VNF The GET method queries information about an alarm.
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query and validate response
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		${etag} Output response headers ETag
		Set Suite Variable &{original_etag} ${etag}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		GET Fault Management Individual Alarm with invalid id
		Log Query NFVO The GET method queries information about an invalid alarm. Should return does not exist
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms/${invalidAlarmId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		PATCH Fault Management Individual Alarm
		log Trying to perform a PATCH. This method modifies an individual alarm resource
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE_PATCH}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/alarmModifications.json
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId} ${body}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		PATCH Fault Management Individual Alarm - precondition failed
		log Trying to perform a PATCH. This method modifies an individual alarm resource
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE_PATCH}"}
		Set Headers {"If-Match": "${original_etag[0]}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/alarmModifications.json
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId} ${body}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		PATCH Fault Management Individual Alarm Conflict
		log Trying to perform a PATCH. This method modifies an individual alarm resource
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE_PATCH}"}
		Set Headers {"If-Match": "${Etag}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/alarmModifications.json
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId} ${body}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do POST Subscription
		Log Create subscription instance by POST to ${apiRoot}/${apiName}/${apiVersion}/subscriptions
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/fmSubscriptionRequest.json
		Post ${apiRoot}/${apiName}/${apiVersion}/subscriptions ${body}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do GET Subscriptions
		Log Get the list of active subscriptions
		Set Headers {"Accept": "${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization": "${AUTHORIZATION}"}
		GET ${apiRoot}/${apiName}/${apiVersion}/subscriptions
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do GET Subscriptions with filter
		Log Get the list of active subscriptions using a filter
		Set Headers {"Accept": "${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization": "${AUTHORIZATION}"}
		GET ${apiRoot}/${apiName}/${apiVersion}/subscriptions?${sub_filter}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do GET Subscriptions with Invalid filter
		Log Get the list of active subscriptions using an invalid filter
		Set Headers {"Accept": "${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization": "${AUTHORIZATION}"}
		GET ${apiRoot}/${apiName}/${apiVersion}/subscriptions?${sub_filter_invalid}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do PUT Subscriptions
		log Trying to perform a PUT Subscriptions. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Put ${apiRoot}/${apiName}/${apiVersion}/subscriptions
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do PATCH Subscriptions
		log Trying to perform a PATCH Subscriptions. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Patch ${apiRoot}/${apiName}/${apiVersion}/subscriptions
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do DELETE Subscriptions
		log Trying to perform a DELETE Subscriptions. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Delete ${apiRoot}/${apiName}/${apiVersion}/subscriptions
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do POST Individual Subscription
		log Trying to perform a POST. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Post ${apiRoot}/${apiName}/${apiVersion}/subscriptions/${subscriptionId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do GET Individual Subscription
		log Trying to get information about an individual subscription
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Get ${apiRoot}/${apiName}/${apiVersion}/subscriptions/${subscriptionId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do PUT Individual Subscription
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Put ${apiRoot}/${apiName}/${apiVersion}/subscriptions/${subscriptionId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do PATCH Individual Subscription
		log Trying to perform a PATCH. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Patch ${apiRoot}/${apiName}/${apiVersion}/subscriptions/${subscriptionId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}

		Do DELETE Individual Subscription
		log Trying to perform a DELETE.
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Delete ${apiRoot}/${apiName}/${apiVersion}/subscriptions/${subscriptionId}
		${outputResponse}= Output response
		Set Global Variable @{response} ${outputResponse}
		No newline at end of file

SOL003/VNFFaultManagement-API/IndividualAlarm.robot

+73 −102

Changes for SOL003/VNFFaultManagement-API/IndividualAlarm.robot: 73 added lines, 102 removed lines.
Original line number	Diff line number	Diff line
		* Settings *
		# Suite setup Expect spec SOL003-VNFLifecycleManagement-API.yaml
		Resource environment/variables.txt
		Resource FaultManagement-APIKeyword.robot
		Library REST ${VNFM_SCHEMA}://${VNFM_HOST}:${VNFM_PORT}
		Library OperatingSystem
		Library JSONLibrary
		@@ -8,127 +9,97 @@ Library JSONSchemaLibrary schemas/
		Library DependencyLibrary


		* Variables *
		${original_etag} 1234

		* Test Cases *
		POST Alarm - Method not implemented
		log Trying to perform a POST. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Post ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		Log Validate Status code
		Output response
		Integer response status 405
		[Documentation] Test ID: 7.3.5.2.1
		... Test title: POST Alarm - Method not implemented
		... Test objective: The objective is to test that Post method is not allowed to create Fault management individual alarm on VNF
		... Pre-conditions: none
		... Reference: section 7.4.3.3.1 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Send POST request for fault management Individual Alarm
		Check HTTP Response Status Code Is 405

		Get information about an alarm
		[Documentation] Test ID: 7.4.3.1
		... Test title: Get information about an alarm
		... Test objective: The objective is to read an individual alarm.
		Get information about an fault management individual alarm
		[Documentation] Test ID: 7.3.5.2.2
		... Test title: Get information about an fault management individual alarm
		... Test objective: The objective is to retrieve information about an individual alarm and perform a JSON schema and content validation of the returned alarm data structure
		... Pre-conditions: The related alarm exists
		... Reference: section 7.4.3 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions:
		Log Query VNF The GET method queries information about an alarm.
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Log Execute Query and validate response
		Get ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		${etag} Output response headers ETag
		Set Suite Variable &{original_etag} ${etag}
		Log Validate Status code
		Integer response status 200
		${contentType}= Output response headers Content-Type
		Should Contain ${contentType} ${CONTENT_TYPE}
		${result}= Output response body
		Validate Json alarm.schema.json ${result}
		Log Validation OK
		... Applicability: none
		... Post-Conditions: none
		GET Fault Management Individual Alarm
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is alarm

		PUT Alarm - Method not implemented
		log Trying to perform a PUT. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Put ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		Log Validate Status code
		Integer response status 405
		[Documentation] Test ID: 7.3.5.2.3
		... Test title: PUT Alarm - Method not implemented
		... Test objective: he objective is to test that PUT method is not allowed to for Fault management individual alarm on VNF
		... Pre-conditions: The related alarm exists
		... Reference: section 7.4.3.3.3 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		PUT Fault Management Individual Alarm
		Check HTTP Response Status Code Is 405

		PATCH Alarm
		[Documentation] Test ID: 7.4.3.2
		... Test title: Modify an individual alarm resource
		... Test objective: The objective is to Modify an individual alarm resource
		PATCH Fault Management Individual Alarm
		[Documentation] Test ID: 7.4.5.2.4
		... Test title: PATCH Fault Management Individual Alarm
		... Test objective: The objective is to Modify an individual alarm resource and perform a JSON schema and content validation of the returned alarm data structure
		... Pre-conditions: The related alarm exists
		... Reference: section 7.4.3 - SOL003 v2.4.1
		... Reference: section 7.4.3.3.4 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions:
		log Trying to perform a PATCH. This method modifies an individual alarm resource
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE_PATCH}"}
		Set Headers {"If-Match": "${original_etag[0]}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/alarmModifications.json
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId} ${body}
		Log Validate Status code
		${Etag_modified}= Output response headers ETag
		Integer response status 200
		${contentType}= Output response headers Content-Type
		Should Contain ${contentType} ${CONTENT_TYPE}
		${result}= Output response body
		Validate Json AlarmModification.schema.json ${result}
		Log Validation OK
		... Applicability: none
		... Post-Conditions: none
		Check Postcondition VNF fault management individual alarm Exists
		PATCH Fault Management Individual Alarm
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is alarmModification

		PATCH Alarm - Precondition failed
		[Documentation] Test ID: 7.4.3.2-1
		Modify an individual alarm resource - Precondition failed
		[Documentation] Test ID: 7.4.5.2.5
		... Test title: Modify an individual alarm resource - Precondition failed
		... Test objective: The objective is to Modify an individual alarm resource
		... Test objective: The objective is to test that we cannot Modify an individual alarm resource if the alarm is already in the state that is requested to be set
		... Pre-conditions: The related alarm exists
		... Reference: section 7.4.3 - SOL003 v2.4.1
		... Reference: section 7.4.3.3.4 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions: The alarm resource is not modified
		Depends On Test PATCH Alarm # If the previous test scceeded, it means that Etag has been modified
		log Trying to perform a PATCH. This method modifies an individual alarm resource
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE_PATCH}"}
		Set Headers {"If-Match": "${original_etag[0]}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/alarmModifications.json
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId} ${body}
		Log Validate Status code
		Integer response status 412
		${problemDetails}= Output response body
		Validate Json ProblemDetails.schema.json ${problemDetails}
		Log Validation OK
		... Applicability: none
		... Post-Conditions: none
		Check Postcondition VNF fault management individual alarm Exists
		PATCH Fault Management Individual Alarm - precondition failed
		Check HTTP Response Status Code Is 409
		Check HTTP Response Body Json Schema Is ProblemDetails


		PATCH Alarm - Conflict
		[Documentation] Test ID: 7.4.3.2-1
		Modify an individual alarm resource - Conflict
		[Documentation] Test ID: 7.4.5.2.6
		... Test title: Modify an individual alarm resource - Conflict
		... Test objective: The objective is to Modify an individual alarm resource
		... Test objective: The objective is to test that we cannot Modify an individual alarm resource if the resource was modified by another entity
		... Pre-conditions: The related alarm exists
		... Reference: section 7.4.3 - SOL003 v2.4.1
		... Reference: section 7.4.3.3.4 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability:
		... Post-Conditions: The alarm resource is not modified
		log Trying to perform a PATCH. This method modifies an individual alarm resource
		Set Headers {"Accept":"${ACCEPT}"}
		Set Headers {"Content-Type": "${CONTENT_TYPE_PATCH}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		${body}= Get File jsons/alarmModifications.json
		Patch ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId} ${body}
		Log Validate Status code
		Integer response status 409
		${problemDetails}= Output response body
		Validate Json ProblemDetails.schema.json ${problemDetails}
		Log Validation OK

		... Applicability: none
		... Post-Conditions: none
		Depends On Test PATCH Fault Management Individual Alarm
		Check Postcondition VNF fault management individual alarm Exists
		PATCH Fault Management Individual Alarm Conflict
		Check HTTP Response Status Code Is 412
		Check HTTP Response Body Json Schema Is ProblemDetails

		DELETE Alarm - Method not implemented
		log Trying to perform a DELETE. This method should not be implemented
		Set Headers {"Accept":"${ACCEPT}"}
		Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"Authorization":"${AUTHORIZATION}"}
		Delete ${apiRoot}/${apiName}/${apiVersion}/alarms/${alarmId}
		Log Validate Status code
		Integer response status 405
		[Documentation] Test ID: 7.3.5.2.7
		... Test title: DELETE Alarm - Method not implemented
		... Test objective: The objective is to test that DELETE method is not allowed to for Fault management individual alarm on VNF
		... Pre-conditions: nona
		... Reference: section 7.4.3.3.5 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: The individual alarm still exists
		DELETE Fault Management Individual Alarm
		Check HTTP Response Status Code Is 405
		Check Postcondition VNF fault management individual alarm Exists
		No newline at end of file

SOL003/VirtualisedResourcesQuotaAvailableNotification-API/IndividualSubscription.robot

+21 −19

Changes for SOL003/VirtualisedResourcesQuotaAvailableNotification-API/IndividualSubscription.robot: 21 added lines, 19 removed lines.
Original line number	Diff line number	Diff line
		@@ -10,63 +10,65 @@ Documentation This resource represents an individual subscription. The client
		Suite Setup Check Individual Subscription existance

		* Test Cases *
		Post Individual Subscription - Method not implemented
		Create new Virtualised Resources Quota Available Notification individual subscription
		[Documentation] Test ID: 7.3.7.2.1
		... Test title: Post Individual Subscription - Method not implemented
		... Test objective: The objective is to test that POST method is not allowed to create a new individual subscription instance on NFV
		... Pre-conditions: A NFV instance is instantiated
		... Test title: Create new Virtualised Resources Quota Available Notification individual subscription
		... Test objective: The objective is to test that POST method is not allowed to create a new Virtualised Resources Quota Available Notification individual subscription instance on VNF
		... Pre-conditions: A VNF instance is instantiated
		... Reference: section 11.4.3.3.1 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Do Post Individual Subscription
		Send Post request for Virtualised Resources Quota Available Notification Individual Subscription
		Check HTTP Response Status Code Is 405

		Get Information about an individual subscription
		[Documentation] Test ID: 7.3.7.2.2
		... Test title: Get Information about an individual subscription
		... Test objective: The objective is to read an individual subscription subscribed by the client
		... Test objective: The objective is to read an individual Virtualised Resources Quota Available Notification subscription subscribed by the client and perform a JSON schema and content validation of the returned individual subscription data structure
		... Pre-conditions: The subscription with the given id exists
		... Reference: section 11.4.3.3.2 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Do Get individual subscription
		Get Virtualised Resources Quota Available Notification individual subscription
		Check HTTP Response Status Code Is 200
		Check HTTP Response Body Json Schema Is VrQuotaAvailSubscription.schema.json
		Check HTTP Response Body Json Schema Is VrQuotaAvailSubscription

		PUT an individual subscription - Method not implemented
		[Documentation] Test ID: 7.3.7.2.3
		... Test title: Put Individual Subscription - Method not implemented
		... Test objective: The objective is to test that PUT method is not allowed to update a existing individual subscription instance on NFV
		... Pre-conditions: A NFV instance is instantiated
		... Test title: PUT an individual subscription - Method not implemented
		... Test objective: The objective is to test that PUT method is not allowed to update a existing Virtualised Resources Quota Available Notification individual subscription instance on VNF
		... Pre-conditions: A VNF instance is instantiated
		... Reference: section 11.4.3.3.3 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Do Put Individual Subscription
		Put Virtualised Resources Quota Available Notification individual Subscription
		Check HTTP Response Status Code Is 405

		PATCH an individual subscription - Method not implemented
		[Documentation] Test ID: 7.3.7.2.4
		... Test title: Patch Individual Subscription - Method not implemented
		... Test objective: The objective is to test that PATCH method is not allowed to modify a existing individual subscription instance on NFV
		... Pre-conditions: A NFV instance is instantiated
		... Test title: PATCH an individual subscription - Method not implemented
		... Test objective: The objective is to test that PATCH method is not allowed to modify a existing Virtualised Resources Quota Available Notification individual subscription instance on VNF
		... Pre-conditions: A VNF instance is instantiated
		... Reference: section 11.4.3.3.4 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Do Patch Individual Subscription
		Patch Virtualised Resources Quota Available Notification individual subscription
		Check HTTP Response Status Code Is 405

		DELETE an individual subscription
		[Documentation] Test ID: 7.3.7.2.5
		... Test title: Delete an Individual Subscription
		... Test objective: The objective is to test that Delete method is allowed to remove a existing individual subscription instance on NFV
		... Test title: DELETE an individual subscription
		... Test objective: The objective is to test that Delete method is allowed to remove a existing Virtualised Resources Quota Available Notification individual subscription instance on VNF
		... Pre-conditions: The subscription with the given id exists
		... Reference: section 11.4.3.3.5 - SOL003 v2.4.1
		... Config ID: Config_prod_VNFM
		... Applicability: none
		... Post-Conditions: none
		Do Delete an individual subscription
		Delete Virtualised Resources Quota Available Notification individual subscription
		Check HTTP Response Status Code Is 204
		Check Postcondition VNF Virtualised Resources Quota Available Notification individual Subscriptions is Deleted

		No newline at end of file

Updated doc for SOL005 NSD mgmt

Merge request reports