"asn1/IS/ETSI_TS_103301/RTCMEM_PDU_Descriptions.asn" did not exist on "6731ae2bc1cb0ccbb53beab8f92433c307a8aa3d"
Newer
Older
*** Settings ***
Library JSONSchemaLibrary schemas/
Resource environment/variables.txt # Generic Parameters
Library JSONLibrary
Library REST ${VNFM_SCHEMA}://${VNFM_HOST}:${VNFM_PORT} ssl_verify=false
Resource environment/thresholds.txt
Library OperatingSystem
*** Test Cases ***
Giacomo Bernini
committed
GET All Performance Thresholds
[Documentation] Test ID: 6.3.3.4.1
... Test title: GET All Performance Thresholds
Giacomo Bernini
committed
... Test objective: The objective is to test the retrieval of all the available VNF performance thresholds and perform a JSON schema validation of the collected thresholds data structure
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.2 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
GET all Performance Thresholds
Check HTTP Response Status Code Is 200
Check HTTP Response Body Json Schema Is Thresholds
GET Performance Thresholds with attribute-based filter
[Documentation] Test ID: 6.3.3.4.2
... Test title: GET Performance Thresholds with attribute-based filter
Giacomo Bernini
committed
... Test objective: The objective is to test the retrieval of all the available VNF performance thresholds when using attribute-based filters, perform a JSON schema validation of the collected thresholds data structure, and verify that the retrieved information matches the issued attribute-based filter
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.2 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
GET Performance Thresholds with attribute-based filter
Check HTTP Response Status Code Is 200
Check HTTP Response Body Json Schema Is Thresholds
Check HTTP Response Body Thresholds match the requested attribute-based filter
Giacomo Bernini
committed
GET Performance Thresholds with invalid attribute-based filter
[Documentation] Test ID: 6.3.3.4.3
... Test title: GET Performance Thresholds with invalid attribute-based filter
Giacomo Bernini
committed
... Test objective: The objective is to test that the retrieval of VNF performance thresholds fails when using invalid attribute-based filter, and perform the JSON schema validation of the failed operation HTTP response
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.2 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
GET Performance Thresholds with invalid attribute-based filter
Giacomo Bernini
committed
GET Performance Thresholds with invalid resource endpoint
[Documentation] Test ID: 6.3.3.4.4
... Test title: GET Performance Thresholds with invalid resource endpoint
Giacomo Bernini
committed
... Test objective: The objective is to test that the retrieval of VNF performance thresholds fails when using invalid resource endpoint, and perform the JSON schema validation of the failed operation HTTP response
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.2 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
GET VNF Performance Thresholds with invalid resource endpoint
Check HTTP Response Status Code Is 400
Check HTTP Response Body Json Schema Is ProblemDetails
Create new Performance Threshold
[Documentation] Test ID: 6.3.3.4.5
... Test title: Create new Performance Threshold
Giacomo Bernini
committed
... Test objective: The objective is to test the creation of a new VNF performance threshold and perform the JSON schema validation of the returned threshold data structure
... Pre-conditions: A VNF instance is instantiated.
... Reference: Clause 6.4.5.3.1 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: The VNF Performance Threshold is successfully created on the VNFM
Send Post Request Create new Performance Threshold
Check HTTP Response Status Code Is 201
Check HTTP Response Body Json Schema Is Threshold
Check HTTP Response Header Contains Location
Check Postcondition Threshold Exists
PUT Performance Thresholds - Method not implemented
... Test title: PUT Performance Thresholds - Method not implemented
Giacomo Bernini
committed
... Test objective: The objective is to test that PUT method is not allowed to modify VNF Performance Thresholds
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNF.
... Reference: Clause 6.4.5.3.3 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
Send PUT Request for all Performance Thresholds
Check HTTP Response Status Code Is 405
PATCH Performance Thresholds - Method not implemented
... Test title: PATCH Performance Thresholds - Method not implemented
Giacomo Bernini
committed
... Test objective: The objective is to test that PATCH method is not allowed to modify VNF Performance Thresholds
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.4 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
Send PATCH Request for all Performance Thresholds
Check HTTP Response Status Code Is 405
DELETE Performance Thresholds - Method not implemented
... Test title: DELETE Performance Thresholds - Method not implemented
Giacomo Bernini
committed
... Test objective: The objective is to test that DELETE method is not allowed to update VNF Performance Thresholds
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.5 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: The VNF performance thresholds are not deleted by the failed operation
Giacomo Bernini
committed
Send DELETE Request for all Performance Thresholds
Check HTTP Response Status Code Is 405
Check Postcondition Thresholds Exist
Giacomo Bernini
committed
GET Performance Thresholds with Paged Response
[Documentation] Test ID: 6.3.3.4.9
... Test title: GET Performance Thresholds with Paged Response
... Test objective: The objective is to test the retrieval of all the available VNF performance thresholds with Paged response
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.2 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
GET all Performance Thresholds
Check HTTP Response Status Code Is 200
Check LINK in Header
GET Performance Thresholds for Bad Request Response too big
[Documentation] Test ID: 6.3.3.4.10
... Test title: GET Performance Thresholds for Bad Request Response too big
... Test objective: The objective is to test that the retrieval of VNF performance thresholds fails when response is too big, and perform the JSON schema validation of the failed operation HTTP response
... Pre-conditions: A VNF instance is instantiated. One or more VNF performance thresholds are set in the VNFM.
... Reference: Clause 6.4.5.3.2 - ETSI GS NFV-SOL 002 [2] v2.6.1
Giacomo Bernini
committed
... Config ID: Config_prod_VNFM
... Applicability: none
... Post-Conditions: none
GET all Performance Thresholds
Check HTTP Response Status Code Is 400
Check HTTP Response Body Json Schema Is ProblemDetails
Giacomo Bernini
committed
*** Keywords ***
GET all Performance Thresholds
Log Trying to get all thresholds present in the VNFM
Set Headers {"Accept": "${ACCEPT_JSON}"}
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
GET ${apiRoot}/${apiName}/${apiVersion}/thresholds
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
GET Performance Thresholds with attribute-based filter
Log Trying to get thresholds present in the VNFM with filter
Set Headers {"Accept": "${ACCEPT_JSON}"}
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
GET ${apiRoot}/${apiName}/${apiVersion}/thresholds?${FILTER_OK}
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
GET Performance Thresholds with invalid attribute-based filter
Log Trying to get thresholds present in the VNFM with invalid filter
Set Headers {"Accept": "${ACCEPT_JSON}"}
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
GET ${apiRoot}/${apiName}/${apiVersion}/thresholds?${FILTER_KO}
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
GET VNF Performance Thresholds with invalid resource endpoint
Log Trying to get thresholds present in the VNFM with invalid resource endpoint
Set Headers {"Accept": "${ACCEPT_JSON}"}
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
GET ${apiRoot}/${apiName}/${apiVersion}/threshold
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
Send Post Request Create new Performance Threshold
Log Creating a new THreshold
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
Set Headers {"Accept": "${ACCEPT_JSON}"}
Set Headers {"Content-Type": "${CONTENT_TYPE_JSON}"}
${request}= Get File jsons/CreateThresholdRequest.json
POST ${apiRoot}/${apiName}/${apiVersion}/thresholds ${request}
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
Send PUT Request for all Performance Thresholds
Log PUT THresholds
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
Giacomo Bernini
committed
Set Headers {"Accept": "${ACCEPT_JSON}"}
Set Headers {"Content-Type": "${CONTENT_TYPE_JSON}"}
PUT ${apiRoot}/${apiName}/${apiVersion}/thresholds
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
Send PATCH Request for all Performance Thresholds
Log PUT THresholds
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
Giacomo Bernini
committed
Set Headers {"Accept": "${ACCEPT_JSON}"}
Set Headers {"Content-Type": "${CONTENT_TYPE_JSON}"}
PATCH ${apiRoot}/${apiName}/${apiVersion}/thresholds
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
Send DELETE Request for all Performance Thresholds
Log DELETE THresholds
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
DELETE ${apiRoot}/${apiName}/${apiVersion}/thresholds
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
Check Postcondition Thresholds Exist
Log Checking that Thresholds still exists
GET all Performance Thresholds
Check Postcondition Threshold Exists
Log Checking that Threshold exists
Set Headers {"Accept": "${ACCEPT_JSON}"}
Run Keyword If ${AUTH_USAGE} == 1 Set Headers {"${AUTHORIZATION_HEADER}":"${AUTHORIZATION_TOKEN}"}
GET ${apiRoot}/${apiName}/${apiVersion}/thresholds/${response['body']['id']}
Giacomo Bernini
committed
${output}= Output response
Giacomo Bernini
committed
Check HTTP Response Status Code Is 200
Check HTTP Response Body Json Schema Is Threshold
Check HTTP Response Body Thresholds match the requested attribute-based filter
Giacomo Bernini
committed
Log Checking that attribute-based filter is matched
@{words} = Split String ${FILTER_OK} ,${SEPERATOR}
Should Be Equal As Strings ${response['body'][0]['objectInstanceId']} @{words}[1]
Giacomo Bernini
committed
Check HTTP Response Status Code Is
[Arguments] ${expected_status}
Should Be Equal As Strings ${response['status']} ${expected_status}
Giacomo Bernini
committed
Log Status code validated
Check HTTP Response Header Contains
[Arguments] ${CONTENT_TYPE}
Should Contain ${response['headers']} ${CONTENT_TYPE}
Giacomo Bernini
committed
Log Header is present
Check HTTP Response Body Json Schema Is
[Arguments] ${input}
Should Contain ${response['headers']['Content-Type']} application/json
${schema} = Catenate SEPARATOR= ${input} .schema.json
Validate Json ${schema} ${response['body']}
Giacomo Bernini
committed
Log Json Schema Validation OK
Giacomo Bernini
committed
Check LINK in Header
${linkURL}= Get Value From Json ${response['headers']} $..Link
Giacomo Bernini
committed
Should Not Be Empty ${linkURL}