Newer
Older
{
"description": "This type represents an \"Individual VNF snapshot\" resource. The \"id\" attributed is used by the NFVO to index and\nidentify the VNF snapshots information resources that are accessible via the NFVO. The identifier is still\ngenerated by the VNFM and copied into the present \"VnfSnapshotInfo\" representing the \"Individual VNF snapshot\"\nresource hold by the NFVO.\n",
"type": "object",
"required": ["id"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfSnapshotPkgId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfSnapshot": {
"description": "This type represents a VNF Snapshot. It shall comply with the provisions defined in table 6.5.2.18-1.\n",
"type": "object",
"required": ["id", "vnfInstanceId", "triggeredAt", "createdAt", "vnfdId", "vnfInstance", "vnfcSnapshots"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfInstanceId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"creationStartedAt": {
"description": "Date-time stamp. Representation: String formatted according toas defined by the date-time production in IETF RFC 3339.\n",
"type": "string",
"format": "date-time"
},
"creationFinishedAt": {
"description": "Date-time stamp. Representation: String formatted according toas defined by the date-time production in IETF RFC 3339.\n",
"type": "string",
"format": "date-time"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfInstance": {
"description": "This type represents a VNF instance. It shall comply with the provisions defined in table 6.5.3.57-1.\nNOTE: Clause B.3.2 of ETSI GS NFV-SOL 003 provides examples illustrating the relationship among the different run-time information elements (CP, VL and link ports) used to represent the connectivity \n of a VNF.\n\nNOTE 1: Modifying the value of this attribute shall not be performed when conflicts exist between the previous and the newly referred VNF package, i.e. when the new VNFD is changed with respect to \n the previous VNFD in other aspects than merely referencing to other VNF software images. \n In order to avoid misalignment of the VnfInstance with the current VNF's on-boarded VNF Package, \n the values of attributes in the VnfInstance that have corresponding attributes in the VNFD shall \n be kept in sync with the values in the VNFD.\nNOTE 2: ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD based on TOSCA specifications. NOTE 3: VNF configurable properties are sometimes also referred to as configuration parameters applicable to a VNF. Some of these are set prior to instantiation and cannot be modified if the VNF is instantiated, \n some are set prior to instantiation (are part of initial configuration) and can be modified later, \n and others can be set only after instantiation. The applicability of certain configuration may depend \n on the VNF and the required operation of the VNF at a certain point in time.\nNOTE 4: It is possible to have several ExtManagedVirtualLinkInfo for the same VNF internal VL in case of a multi-site VNF spanning several VIMs. The set of ExtManagedVirtualLinkInfo corresponding to the same \n VNF internal VL shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed \n multi-site VL instance (refer to clause 6.5.3.59).\nNOTE 5: Even though externally-managed internal VLs are also used for VNF-internal connectivity, they shall not be listed in the \"vnfVirtualLinkResourceInfo\" attribute as this would be redundant.\n",
"required": ["id", "vnfdId", "vnfProvider", "vnfProductName", "vnfSoftwareVersion", "vnfdVersion", "vnfPkgId", "instantiationState"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfInstanceName": {
"description": "Name of the VNF instance. Modifications to this attribute can be requested using the \"ModifyVnfInfoData\" structure.\n",
"type": "string"
},
"vnfInstanceDescription": {
"description": "Human-readable description of the VNF instance. Modifications to this attribute can be requested using the \"ModifyVnfInfoData\" structure.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfProvider": {
"description": "Provider of the VNF and the VNFD. The value is copied from the VNFD.\n",
"type": "string"
},
"vnfProductName": {
"description": "Name to identify the VNF Product. The value is copied from the VNFD.\n",
"type": "string"
},
"vnfSoftwareVersion": {
"description": "A Version. Representation: string of variable length.\n",
"type": "string"
},
"vnfdVersion": {
"description": "A Version. Representation: string of variable length.\n",
"type": "string"
},
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
"versionDependency": {
"description": "Describes version dependencies currently valid for the VNF instance. Identifies versions of descriptors of other constituents in the NSD upon which the VNF depends. The dependencies may be described for the VNFD referenced in this VnfInfo with vnfdId and for VNFDs with the same VnfdExtInvariantId. There shall not be more than one versionDependency present with the same dependentConstituentId.\n",
"type": "array",
"items": {
"description": "This type represents the information related to all dependencies that an NSD constituent has on the versions of other NSD constituents. It shall comply with the provisions defined in table 6.5.3.112-1.\n",
"type": "object",
"required": ["dependentConstituentId"],
"properties": {
"dependentConstituentId": {
"description": "An identifier that is unique within a NS descriptor. Representation: string of variable length.\n",
"type": "string"
},
"versionDependencyStatement": {
"description": "Identifies one or multiple versions of an NSD constituents upon which the dependent constituent identified by dependentConstituentId has a dependency. Cardinality 0 is used to remove an existing version dependency in a profile.\n",
"type": "array",
"items": {
"description": "This type represents the information related to one or more VNF, NS or PNF descriptor identifiers which describe one single dependency. When more than one descriptor is indicated, they correspond to different versions of the same VNF, NS or PNF and they represent alternatives to fulfil the dependency. It shall comply with the provisions defined in table 6.5.3.113-1.\n",
"type": "object",
"required": ["descriptorId"],
"properties": {
"descriptorId": {
"description": "Identifies a VNFD, NSD or PNFD upon which the entity using this information element depends. When more than one descriptor is indicated, they shall correspond to versions of the same VNF, NS or PNF and they represent. alternatives, i.e. the presence of one of them fulfills the dependency.",
"type": "array",
"items": {
"description": "An identifier that is unique within a NS descriptor. Representation: string of variable length.\n",
"type": "string"
}
}
}
}
}
}
}
},
"vnfPkgId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfConfigurableProperties": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
},
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"instantiationState": {
"description": "The instantiation state of the VNF.\nPermitted values: - NOT_INSTANTIATED: The VNF instance is terminated or not instantiated. - INSTANTIATED: The VNF instance is instantiated.\n",
"enum": ["NOT_INSTANTIATED", "INSTANTIATED"]
},
"instantiatedVnfInfo": {
"description": "Information specific to an instantiated VNF instance. This attribute shall be present if the instantiateState attribute value is INSTANTIATED.\n",
"type": "object",
"required": ["flavourId", "vnfState", "extCpInfo"],
"properties": {
"flavourId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfState": {
"type": "string",
"enum": ["STARTED", "STOPPED"]
},
"scaleStatus": {
"description": "Scale status of the VNF, one entry per aspect. Represents for every scaling aspect how \"big\" the VNF has been scaled w.r.t. that aspect.\n",
"type": "array",
"items": {
"required": ["aspectId", "scaleLevel"],
"type": "object",
"properties": {
"aspectId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"scaleLevel": {
"description": "Indicates the scale level. The minimum value shall be 0 and the maximum value shall be <= maxScaleLevel as described in the VNFD.\n",
"type": "integer"
}
}
}
},
"maxScaleLevels": {
"description": "Maximum allowed scale levels of the VNF, one entry per aspect. This attribute shall be present if the VNF supports scaling.\n",
"type": "array",
"items": {
"required": ["aspectId", "scaleLevel"],
"type": "object",
"properties": {
"aspectId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"scaleLevel": {
"description": "Indicates the scale level. The minimum value shall be 0 and the maximum value shall be <= maxScaleLevel as described in the VNFD.\n",
"type": "integer"
}
}
}
},
"extCpInfo": {
"description": "Information about the external CPs exposed by the VNF instance. When trunking is enabled, the list of entries includes both, external CPs corresponding to parent ports of a trunk, and external CPs associated to sub-ports of a trunk.\n",
"type": "array",
"minItems": 1,
"items": {
"description": "This type represents information about an external CP of a VNF. It shall comply with the provisions defined in Table 6.5.3.70-1. NOTE 1: The attributes attributes \"associatedVnfcCpId\", \"associatedVipCpId\", \"associatedVirtualCpId\" and \"associatedVnfVirtualLinkId\" are mutually exclusive. Exactly one shall be present. NOTE 2: An external CP instance is not associated to a link port in the cases indicated for the extLinkPorts attribute in clause 6.5.3.26. NOTE 3: Cardinality greater than 1 is only applicable for specific cases where more than one network attachment definition resource is needed to fulfil the connectivity requirements of the external CP, e.g. to build a link redundant mated pair in SR-IOV cases. NOTE 4: When more than one \"netAttDefResourceId\" is indicated, all shall belong to the same namespace.\n",
"required": ["id", "cpdId", "cpProtocolInfo"],
"required": ["associatedVnfcCpId"]
}, {
"required": ["associatedVipCpId"]
}, {
"required": ["associatedVirtualCpId"]
}, {
"required": ["associatedVnfVirtualLinkId"]
}],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpdId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"cpConfigId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"cpProtocolInfo": {
"description": "Network protocol information for this CP.\n",
"type": "array",
"minItems": 1,
"items": {
"description": "This type describes the protocol layer(s) that a CP or SAP uses together with protocol-related information, like addresses. It shall comply with the provisions defined in Table 6.5.3.58-1. NOTE: This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported.\n",
"required": ["layerProtocol", "ipOverEthernet"],
"description": "The identifier of layer(s) and protocol(s) associated to the network address information. Permitted values: - IP_OVER_ETHERNET\n - IP_FOR_VIRTUAL_CP\nSee note.\n",
"enum": ["IP_OVER_ETHERNET", "IP_FOR_VIRTUAL_CP"]
"description": "This type represents information about a network address that has been assigned.\nNOTE 1: At least one of \"macAddress\" or \"ipAddresses\" shall be present. NOTE 2: Exactly one of \"addresses\" or \"addressRange\" shall be present. NOTE 3: If the Cp instance represents a subport in a trunk, \"segmentationId\" shall be present. Otherwise it shall not be present. NOTE 4: Depending on the NFVI networking infrastructure, the \"segmentationId\" may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local \"segmentationId\" to whatever \"segmentationId\" is actually used by the NFVI's transport technology.\n",
"required": ["macAddress"]
}, {
"required": ["ipAddresses"]
}],
"properties": {
"macAddress": {
"description": "A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons.\n",
"type": "string",
"format": "MAC"
},
"segmentationId": {
"description": "Identification of the network segment to which the Cp instance connects to. See note 3 and note 4.\n",
"type": "string"
},
"ipAddresses": {
"description": "Addresses assigned to the CP instance. Each entry represents IP addresses assigned by fixed or dynamic IP address assignment per subnet. See note 1.\n",
"type": "array",
"items": {
"type": "object",
"required": ["type"],
"required": ["addresses"]
}, {
"required": ["addressRange"]
}],
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"enum": ["IPV4", "IPV6"]
"description": "Fixed addresses assigned (from the subnet defined by \"subnetId\" if provided). See note 2.\n",
"type": "array",
"items": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g., in case of egress connections. Exactly one of \"addresses\" or \"addressRange\" shall be present. See note 2.\n",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
}
},
"type": {
"description": "The type of the IP addresses\n",
"type": "string",
"enum": ["PV4", "PV6"]
},
"addresses": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g. in case of egress connections. See note.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
},
"virtualCpAddress": {
"description": "This type represents information about a network address that has been assigned to a virtual CP.\n",
"type": "object",
"required": ["type"],
"properties": {
"type": {
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"loadBalancerIp": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
}
}
}
},
"extLinkPortId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"netAttDefResourceId": {
"description": "Identifier of the \"NetAttDefResourceInfo\" structure that provides the specification of the interface to attach the connection point to a secondary container cluster network. See notes 3 and 4.\nIt shall be present if the external CP is associated to a VNFC realized by one or a set of OS containers and is connected to a secondary container cluster network. It shall not be present otherwise.\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
},
"metadata": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
},
"associatedVnfcCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"associatedVipCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"associatedVirtualCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
}
}
},
"vipCpInfo": {
"description": "VIP CPs that are part of the VNF instance. Shall be present when that particular VIP CP of the VNFC instance is associated to an external CP of the VNF instance. May be present otherwise.\n",
"type": "array",
"items": {
"description": "This type provides information related to virtual IP (VIP) CP. It shall comply with the provisions defined in table 6.5.3.97 1. NOTE: It is possible that there is no associated VnfcCp because the VIP CP is available but not associated yet.\n",
"type": "object",
"required": ["cpInstanceId", "cpdId"],
"properties": {
"cpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpdId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfExtCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpProtocolInfo": {
"description": "Protocol information for this CP. There shall be one cpProtocolInfo for layer 3. There may be one cpProtocolInfo for layer 2.\n",
"type": "array",
"items": {
"description": "This type describes the protocol layer(s) that a CP or SAP uses together with protocol-related information, like addresses. It shall comply with the provisions defined in Table 6.5.3.58-1. NOTE: This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported.\n",
"type": "object",
"required": ["layerProtocol", "ipOverEthernet"],
"properties": {
"layerProtocol": {
"description": "The identifier of layer(s) and protocol(s) associated to the network address information. Permitted values: - IP_OVER_ETHERNET\n - IP_FOR_VIRTUAL_CP\nSee note.\n",
"type": "string",
"enum": ["IP_OVER_ETHERNET", "IP_FOR_VIRTUAL_CP"]
},
"ipOverEthernet": {
"description": "This type represents information about a network address that has been assigned.\nNOTE 1: At least one of \"macAddress\" or \"ipAddresses\" shall be present. NOTE 2: Exactly one of \"addresses\" or \"addressRange\" shall be present. NOTE 3: If the Cp instance represents a subport in a trunk, \"segmentationId\" shall be present. Otherwise it shall not be present. NOTE 4: Depending on the NFVI networking infrastructure, the \"segmentationId\" may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local \"segmentationId\" to whatever \"segmentationId\" is actually used by the NFVI's transport technology.\n",
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
"type": "object",
"anyOf": [{
"required": ["macAddress"]
}, {
"required": ["ipAddresses"]
}],
"properties": {
"macAddress": {
"description": "A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons.\n",
"type": "string",
"format": "MAC"
},
"segmentationId": {
"description": "Identification of the network segment to which the Cp instance connects to. See note 3 and note 4.\n",
"type": "string"
},
"ipAddresses": {
"description": "Addresses assigned to the CP instance. Each entry represents IP addresses assigned by fixed or dynamic IP address assignment per subnet. See note 1.\n",
"type": "array",
"items": {
"type": "object",
"required": ["type"],
"oneOf": [{
"required": ["addresses"]
}, {
"required": ["addressRange"]
}],
"properties": {
"type": {
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"addresses": {
"description": "Fixed addresses assigned (from the subnet defined by \"subnetId\" if provided). See note 2.\n",
"type": "array",
"items": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g., in case of egress connections. Exactly one of \"addresses\" or \"addressRange\" shall be present. See note 2.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
"type": "string"
}
}
}
},
"type": {
"description": "The type of the IP addresses\n",
"type": "string",
"enum": ["PV4", "PV6"]
},
"addresses": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g. in case of egress connections. See note.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
},
"virtualCpAddress": {
"description": "This type represents information about a network address that has been assigned to a virtual CP.\n",
"type": "object",
"required": ["type"],
"properties": {
"type": {
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"loadBalancerIp": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
}
}
}
},
"associatedVnfcCpIds": {
"description": "Identifiers of the VnfcCps that share the virtual IP addresse allocated to the VIP CP instance. See note.\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
},
"vnfLinkPortId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"metadata": {
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
"description": "Allows the OSS/BSS to provide additional parameter(s) to the termination process at the NS level.\n",
"type": "array",
"items": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
}
},
"virtualCpInfo": {
"description": "virtual CPs that are part of the VNF instance. Shall be present when a particular virtual CP is associated to an external CP of the VNF instance. May be present otherwise.\n",
"type": "array",
"items": {
"description": "This type represents the information related to a virtual CP instance of a VNF. NOTE: A consumer of the VNF LCM interface can learn the actual VNFC instances implementing the service accessible via the virtual CP instance by querying the \"vnfcResourceInfo\" from the \"InstantiatedVnfInfo\" and filtering by corresponding \"vduId\" values.",
"type": "object",
"required": ["cpInstanceId", "cpdId", "resourceHandle", "vduId"],
"properties": {
"cpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpdId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"resourceHandle": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"type": "object",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"vnfExtCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpProtocolInfo": {
"description": "Protocol information for this CP. There shall be one cpProtocolInfo for each layer protocol supported.\n",
"type": "array",
"items": {
"description": "This type describes the protocol layer(s) that a CP or SAP uses together with protocol-related information, like addresses. It shall comply with the provisions defined in Table 6.5.3.58-1. NOTE: This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported.\n",
"type": "object",
"required": ["layerProtocol", "ipOverEthernet"],
"properties": {
"layerProtocol": {
"description": "The identifier of layer(s) and protocol(s) associated to the network address information. Permitted values: - IP_OVER_ETHERNET\n - IP_FOR_VIRTUAL_CP\nSee note.\n",
"type": "string",
"enum": ["IP_OVER_ETHERNET", "IP_FOR_VIRTUAL_CP"]
},
"ipOverEthernet": {
"description": "This type represents information about a network address that has been assigned.\nNOTE 1: At least one of \"macAddress\" or \"ipAddresses\" shall be present. NOTE 2: Exactly one of \"addresses\" or \"addressRange\" shall be present. NOTE 3: If the Cp instance represents a subport in a trunk, \"segmentationId\" shall be present. Otherwise it shall not be present. NOTE 4: Depending on the NFVI networking infrastructure, the \"segmentationId\" may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local \"segmentationId\" to whatever \"segmentationId\" is actually used by the NFVI's transport technology.\n",
"type": "object",
"anyOf": [{
"required": ["macAddress"]
}, {
"required": ["ipAddresses"]
}],
"properties": {
"macAddress": {
"description": "A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons.\n",
"type": "string",
"format": "MAC"
},
"segmentationId": {
"description": "Identification of the network segment to which the Cp instance connects to. See note 3 and note 4.\n",
"type": "string"
},
"ipAddresses": {
"description": "Addresses assigned to the CP instance. Each entry represents IP addresses assigned by fixed or dynamic IP address assignment per subnet. See note 1.\n",
"type": "array",
"items": {
"type": "object",
"required": ["type"],
"oneOf": [{
"required": ["addresses"]
}, {
"required": ["addressRange"]
}],
"properties": {
"type": {
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"addresses": {
"description": "Fixed addresses assigned (from the subnet defined by \"subnetId\" if provided). See note 2.\n",
"type": "array",
"items": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g., in case of egress connections. Exactly one of \"addresses\" or \"addressRange\" shall be present. See note 2.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
}
},
"type": {
"description": "The type of the IP addresses\n",
"type": "string",
"enum": ["PV4", "PV6"]
},
"addresses": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g. in case of egress connections. See note.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
},
"virtualCpAddress": {
"description": "This type represents information about a network address that has been assigned to a virtual CP.\n",
"type": "object",
"required": ["type"],
"properties": {
"type": {
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"loadBalancerIp": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
}
}
}
},
"vduId": {
"description": "Reference to the VDU(s) which implement the service accessible via the virtual CP instance. See note.\n",
"type": "array",
"items": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
}
},
"additionalServiceInfo": {
"description": "Additional service identification information of the virtual CP instance.\n",
"type": "array",
"items": {
"description": "This type represents the additional service information of the virtual CP instance used to expose properties of the virtual CP to NFV-MANO.\nNOTE: This attribute shall only be present if additional information is needed to identify the service termination within the VNF, such as for example a URL path information in an HTTP request required to allow a single virtual CP IP address to be used for several HTTP based services that use the same port number.",
"type": "object",
"required": ["portInfo"],
"properties": {
"portInfo": {
"description": "Service port numbers exposed by the virtual CP instance.\n",
"type": "array",
"items": {
"description": "This type represents the information related to the service identifying port properties exposed by the virtual CP instance.",
"type": "object",
"required": ["name", "protocol", "port", "isPortConfigurable"],
"properties": {
"name": {
"description": "The name of the port exposed by the virtual CP instance.\n",
"type": "string"
},
"protocol": {
"description": "The L4 protocol for this port exposed by the virtual CP instance. Permitted values:\n - TCP\n - UDP\n - SCTP\n",
"type": "string",
"enum": ["TCP", "UDP", "SCTP"]
},
"port": {
"description": "The L4 port number exposed by the virtual CP instance.\n",
"type": "integer"
},
"isPortConfigurable": {
"description": "Specifies whether the port attribute value is allowed to be configurable.\n",
"type": "boolean"
}
}
}
},
"serviceInfo": {
"description": "Service matching information exposed by the virtual CP instance. See note.\n",
"type": "array",
"items": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
}
},
"metadata": {
"description": "Metadata about this virtual CP instance.\n",
"type": "array",
"items": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
}
},
"extVirtualLinkInfo": {
"description": "Information about the external VLs the VNF instance is connected to.\n",
"type": "array",
"items": {
"description": "This type represents information about an VNF external VL.",
"required": ["id", "resourceHandle", "currentVnfExtCpData"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceHandle": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"extLinkPorts": {
"description": "Link ports of this VL.\n",
"type": "array",
"items": {
"description": "This type represents information about a link port of an external VL, i.e. a port providing connectivity for the VNF to an NS VL. NOTE 1: The use cases UC#4 and UC#5 in Annex A.4 of ETSI GS NFV-IFA 007 provide examples for such a configuration. NOTE 2: The value of \"trunkResourceId\" is scoped by the value of \"vimConnectionId\" in the \"resourceHandle\" attribute.\n",
"required": ["id", "resourceHandle"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceHandle": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"cpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"secondaryCpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"trunkResourceId": {
"description": "An identifier maintained by the VIM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
"extNetAttDefResource": {
"description": "Network attachment definition resources that provide the specification of the interface to attach connection points to this VL.\n",
"type": "array",
"items": {
"description": "This type represents the information related to a network attachment definition resource that provides the specification of the interface used to connect one or multiple connection points to a secondary container cluster network\n",
"type": "object",
"required": ["netAttDefResourceInfoId", "netAttDefResource"],
"properties": {
"netAttDefResourceInfoId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"netAttDefResource": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"type": "object",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"associatedExtCpId": {
"description": "Identifier of the external CP of the VNF associated to this network attachment definition resource. Shall be present when the network attachment definition resource is used for external connectivity by the VNF\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
},
"associatedVnfcCpId": {
"description": "Identifier of the VNFC CP of the VNF associated to this network attachment definition resource. May be present when the network attachment definition resource is used for internal connectivity by the VNF.\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
}
}
}
},
"description": "This type represents configuration information for external CPs created from a CPD.\nNOTE 1: In case this identifier refers to a CPD with trunking enabled, the external CP instances created from this CPD will represent ports in a trunk. NOTE 2: The map entry value shall be set to \"null\" in order to delete a \"VnfExtCpConfig\" entry identified by a particular key value from the map, i.e. for the disconnection of an existing external CP instance addressed by cpInstanceId in the deleted map entry from a particular external virtual link, and deletion of that instance in case it represents a subport. Deleting the last key from the map removes the affected instance of the \"VnfExtCpData\" structure from its parent data structure. NOTE 3: Within one VNF instance, all VNFC instances created from a particular VDU have the same external connectivity. Thus, given a particular value of the \"cpdId' attribute, there shall be one \"cpConfig\" entry for each VNFC instance that has been or can be created from a VDU which includes a CPD identified by the \"cpdId\" attribute. If the cpConfig represents a subport in a trunk, all \"cpConfig\" entries in this list shall have the same segmentationId, which means they are connected to the same set of external VLs via the trunk. NOTE 4: If, as defined by the input parameters of a \"ChangeVnfFlavour\", \"ChangeExtVnfConnectivity\" or \"ChangeCurrentVnfPkg\" operation, a cpConfig map entry identified by a particular map key value is moved into another \"ExtVirtualLinkData\" or \"VnfExtCpData\" structure, this particular cpConfig map entry may be used by an external CP instance different than the one that has used it before the operation, or by no external CP instance at all. Renaming a CPD identifier during the \"changeCurrentVnfPkg\" operation does not count as moving the related \"cpConfig\" map entries to a new \"extCpData\" structure.\n",
"required": ["cpdId"],
"properties": {
"cpdId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"cpConfig": {
"description": "Map of instance data that need to be configured on the CP instances created from the respective CPD. The key of the map which identifies the individual VnfExtCpConfig entries is of type \"IdentifierInVnf\" and is managed by the API consumer. The entries shall be applied by the VNFM according to the rules of JSON Merge Patch (see IETF RFC 7396 [11]). See notes 2, 3 and 4.\n",
"type": "object",
"additionalProperties": {
"description": "This type represents an externally provided link port, or a network attachment definition resource of secondary container cluster network, or network address information per instance of a VNF external connection point. In the case of VM-based deployment of the VNFC exposing the external CP: In case a link port is provided, the NFVO shall use that link port when connecting the VNF external CP to the external VL. In case a link port is not provided, the NFVO or VNFM shall create a link port on the external VL, and use that link port to connect the VNF external CP to the external VL. In the case of container-based deployment of the VNFC exposing the external CP, the NFVO and VNFM shall use the network attachment definition resource of secondary container cluster network when connecting the CP to the external VL.\nNOTE 1: The following conditions apply to the attributes \"linkPortId\" and \"cpProtocolData\" for an external CP instance connected or to be connected to a virtual network not\n categorized as secondary container cluster network:\n - At least one of the \"linkPortId\" and \"cpProtocolData\" attributes shall be present for\n an external CP instance representing a subport that is to be created, or an external CP instance\n that is to be created by creating the corresponding VNFC or VNF instance during the current or\n a subsequent LCM operation, or for an existing external CP instance that is to be re-configured\n or added to a particular external virtual link.\n - If the \"cpProtocolData\" attribute is absent, the \"linkPortId\" attribute shall be provided\n referencing a pre-created link port with pre-configured address information.\n - If both \"cpProtocolData\" and \"linkportId\" are provided, the API consumer shall ensure that\n the cpProtocolData can be used with the pre-created link port referenced by \"linkPortId\".\nNOTE 2: In case the NFVO manages its own identifier space, the NFVO may remap this identifier when communicating with the VNFM. If the NFVO knows that there can be an identifier collision when communicating with the VNFM by using the identifier from the OSS/BSS, the NFVO shall remap it. NOTE 3: The following conditions apply to the attributes netAttDefResourceId and cpProtocolData for an external CP instance connected or to be connected to a secondary container cluster network; The \"netAttDefResourceId\" and \"cpProtocolData\" attributes shall both be absent for the deletion of an existing external CP instance addressed by \"cpInstanceId\". At least one of these attributes shall be present for a to-be-created external CP instance or an existing external CP instance. NOTE 4: Cardinality greater than 1 is only applicable for specific cases where more than one network attachment definition resource is needed to fulfil the connectivity requirements of the external CP, e.g. to build a link redundant mated pair in SR-IOV cases. When more than one \"netAttDefResourceId\" is indicated, all shall belong to the same namespace as defined by the corresponding \"netAttDefResourceNamespace\" attribute in the \"NetAttDefResourceData\". NOTE 5: Either \"linkPortId\" or \"netAttDefResourceId\" may be included, but not both.\n",
"oneOf": [{
"required": ["linkPortId"]
}, {
"required": ["cpProtocolData"]
}],
"properties": {
"parentCpConfigId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"linkPortId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"createExtLinkPort": {
"description": "Indicates the need to create a dedicated link port for the external CP. If set to True, a link port is created. If set to False, no link port is created. This attribute is only applicable for external CP instances without a floating IP address that expose a VIP CP instance for which a dedicated IP address is allocated. It shall be present in that case and shall be absent otherwise.\n",
"type": "boolean"
},
"description": "Parameters for configuring the network protocols on the link port that connects the CP to a VL. See notes 1 and 3.\n",
"description": "This type represents network protocol data.\nNOTE:\tThis attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported.\n",
"required": ["layerProtocol"],
"properties": {
"layerProtocol": {
"description": "Identifier of layer(s) and protocol(s). Permitted values: - IP_OVER_ETHERNET - IP_FOR_VIRTUAL_CP See note.\n",
"enum": ["IP_OVER_ETHERNET", "IP_FOR_VIRTUAL_CP"]
"description": "This type represents network address data for IP over Ethernet. NOTE 1: At least one of \"macAddress\" or \"ipAddresses\" shall be present. NOTE 2: Exactly one of \"fixedAddresses\", \"numDynamicAddresses\" or \"ipAddressRange\" shall be present. NOTE 3: If the CP instance represents a subport in a trunk, \"segmentationId\" shall be present. Otherwise it shall not be present. NOTE 4: Depending on the NFVI networking infrastructure, the \"segmentationId\" may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local \"segmentationId\" to whatever \"segmentationId\" is actually used by the NFVI's transport technology.\n",
"required": ["ipAddresses"]
}, {
"required": ["macAddress"]
}],
"properties": {
"macAddress": {
"description": "A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons.\n",
"type": "string",
"format": "MAC"
},
"segmentationType": {
"description": "Specifies the encapsulation type for the traffics coming in and out of the trunk subport. Permitted values are: - VLAN: The subport uses VLAN as encapsulation type. - INHERIT: The subport gets its segmentation type from the network it is connected to. This attribute may be present for CP instances that represent subports in a trunk and shall be absent otherwise. If this attribute is not present for a subport CP instance, default value VLAN shall be used.\n",
"type": "string",
"enum": ["VLAN", "INHERIT"]
},
"description": "Identification of the network segment to which the CP instance connects to. See note 3 and note 4.\n",
"type": "string"
},
"ipAddresses": {
"description": "List of IP addresses to assign to the CP instance. Each entry represents IP address data for fixed or dynamic IP address assignment per subnet. If this attribute is not present, no IP address shall be assigned. See note 1.\n",
"type": "array",
"items": {
"type": "object",
"required": ["type"],
"required": ["fixedAddresses"]
}, {
"required": ["numDynamicAddresses"]
}, {
"required": ["addressRange"]
}],
"description": "The type of the IP addresses. Permitted values: - IPV4\n - IPV6\n",
"enum": ["IPV4", "IPV6"]
},
"fixedAddresses": {
"description": "Fixed addresses to assign (from the subnet defined by \"subnetId\" if provided). Exactly one of \"fixedAddresses\", \"numDynamicAddresses\" or \"ipAddressRange\" shall be present.\n",
"type": "array",
"items": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
},
"numDynamicAddresses": {
"description": "Number of dynamic addresses to assign (from the subnet defined by \"subnetId\" if provided). See note 2.\n",
"type": "integer"
},
"addressRange": {
"description": "An IP address range to be used, e.g. in case of egress connections. In case this attribute is present, IP addresses from the range will be used.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
}
}
}
},
"virtualCpAddress": {
"description": "This type represents network address data for a virtual CP. It shall comply with the provisions defined in table 6.5.3.12a-1.\n",
"type": "object",
"required": ["type"],
"properties": {
"type": {
"description": "Identifier of layer(s) and protocol(s). Permitted values: IP_OVER_ETHERNET.\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"loadBalancerIp": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"netAttDefResourceId": {
"description": "Identifier of the \"NetAttDefResourceData\" structure that provides the specification of the interface to attach the external CP to a secondary container cluster network. It is only applicable if the external CP is connected or to be connected to a secondary container cluster network. It shall not be present if the external CP is related to a virtual network not categorized as secondary container cluster network. See notes 3, 4 and 5.\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
}
}
}
}
}
}
}
}
},
"extManagedVirtualLinkInfo": {
"description": "Information about the externally-managed internal VLs of the VNF instance. See note 4 and note 5.\n",
"description": "This type provides information about an externally-managed internal virtual link for VNFs\n",
"required": ["id", "vnfVirtualLinkDescId", "networkResource"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfVirtualLinkDescId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"networkResource": {
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
"description": "Reference to the VirtualNetwork resource or multi-site connectivity service providing this VL.\n",
"type": "array",
"items": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"type": "object",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
}
},
"vnfLinkPorts": {
"description": "Link ports of this VL.\n",
"type": "array",
"items": {
"type": "object",
"description": "This type represents a link port of an internal VL of a VNF. It shall comply with the provisions defined in table 6.5.3.64-1.\nNOTE 1: Either cpInstanceId with cpInstanceType set to \"EXT_CP\" or any combination of cpInstanceId with cpInstanceType set to \"VNFC_CP\" and vipCpInstanceId (i.e. one or both of them) shall be present for a VnfLinkPortInfo. In case both cpInstanceId with cpInstanceType set to \"VNFC_CP\" and vipCpInstanceId are present, the two different CP instances share the linkport.\n",
"required": ["id", "resourceHandle"],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"resourceHandle": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"cpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpInstanceType": {
"description": "Type of the CP instance that is identified by cpInstanceId. Shall be present if \"cpInstanceId\" is present, and shall be absent otherwise. Permitted values: * VNFC_CP: The link port is connected to a VNFC CP * EXT_CP: The link port is associated to an external CP. See note 1.\n",
"enum": ["VNFC_CP", "EXT_CP"]
},
"vipCpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"trunkResourceId": {
"description": "An identifier maintained by the VIM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
"vnfNetAttDefResource": {
"description": "This type represents the information related to a network attachment definition resource that provides the specification of the interface used to connect one or multiple connection points to a secondary container cluster network\n",
"type": "object",
"required": ["netAttDefResourceInfoId", "netAttDefResource"],
"properties": {
"netAttDefResourceInfoId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"netAttDefResource": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"type": "object",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"associatedExtCpId": {
"description": "Identifier of the external CP of the VNF associated to this network attachment definition resource. Shall be present when the network attachment definition resource is used for external connectivity by the VNF\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
},
"associatedVnfcCpId": {
"description": "Identifier of the VNFC CP of the VNF associated to this network attachment definition resource. May be present when the network attachment definition resource is used for internal connectivity by the VNF.\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
}
}
},
"extManagedMultisiteVirtualLinkId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
}
}
}
},
"monitoringParameters": {
"description": "Performance metrics tracked by the VNFM (e.g. for auto-scaling purposes) as identified by the VNF provider in the VNFD.\n",
"type": "array",
"items": {
"description": "This type represents a monitoring parameter that is tracked by the VNFM, for example, for auto-scaling purposes. It shall comply with the provisions defined in Table 6.5.3.69-1.\n",
"type": "object",
"required": ["id", "performanceMetric"],
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
"properties": {
"id": {
"description": "An identifier that is unique within a NS descriptor. Representation: string of variable length.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"name": {
"description": "Human readable name of the monitoring parameter, as defined in the VNFD.\n",
"type": "string"
},
"performanceMetric": {
"description": "Performance metric that is monitored. This attribute shall contain the related \"Measurement Name\" value as defined in clause 7.2 of ETSI GS NFV-IFA 027.\n",
"type": "string"
}
}
}
},
"localizationLanguage": {
"description": "Information about localization language of the VNF (includes e.g. strings in the VNFD). The localization languages supported by a VNF can be declared in the VNFD, and localization language selection can take place at instantiation time. The value shall comply with the format defined in IETF RFC 5646.\n",
"type": "string"
},
"vnfcResourceInfo": {
"description": "Information about the virtualised compute and storage resources used by the VNFCs of the VNF instance.\n",
"type": "array",
"items": {
"description": "This type represents the information on virtualised compute and storage resources used by a VNFC in a VNF instance. This feature addresses the following capabilities: NFV Architecture support for VNFs which follow cloud-native design principles. Enhance NFV-MANO capabilities to support container technologies. Enhance NFV-MANO capabilities for container management and orchestration. Enhance information model for containerized VNFs both using bare metal or nested virtualization technologies.\nNOTE 1: ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD based on TOSCA specifications. NOTE 2: A VNFC CP is \"connected to\" an external CP if the VNFC CP is connected to an internal VL that exposes an external CP. A VNFC CP is \"exposed as\" an external CP if it is connected directly to an external VL. NOTE 3: The information can be omitted because it is already available as part of the external CP information. NOTE 4: Cardinality greater than 1 is only applicable for specific cases where more than one network attachment definition resource is needed to fulfil the connectivity requirements of the internal CP, e.g. to build a link redundant mated pair in SR-IOV cases. NOTE 5: When more than one \"netAttDefResourceId\" is indicated, all shall belong to the same namespace.\n",
"required": ["id", "vduId", "computeResource"],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vduId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"computeResource": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"storageResourceIds": {
"description": "References to the VirtualStorage resources or references to Storage MCIOs. The value refers to a VirtualStorageResourceInfo item in the VnfInstance.\n",
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
},
"reservationId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfcCpInfo": {
"description": "CPs of the VNFC instance. Shall be present when that particular CP of the VNFC instance is exposed as an external CP of the VNF instance or is connected to an external CP of the VNF instance.See note 2. May be present otherwise.\n",
"type": "array",
"items": {
"type": "object",
"required": ["id", "cpdId"],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpdId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfExtCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpProtocolInfo": {
"description": "Network protocol information for this CP. May be omitted if the VNFC CP is exposed as an external CP. See note 3.\n",
"description": "This type describes the protocol layer(s) that a CP or SAP uses together with protocol-related information, like addresses. It shall comply with the provisions defined in Table 6.5.3.58-1. NOTE: This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported.\n",
"required": ["layerProtocol", "ipOverEthernet"],
"properties": {
"layerProtocol": {
"description": "The identifier of layer(s) and protocol(s) associated to the network address information. Permitted values: - IP_OVER_ETHERNET\n - IP_FOR_VIRTUAL_CP\nSee note.\n",
"enum": ["IP_OVER_ETHERNET", "IP_FOR_VIRTUAL_CP"]
"description": "This type represents information about a network address that has been assigned.\nNOTE 1: At least one of \"macAddress\" or \"ipAddresses\" shall be present. NOTE 2: Exactly one of \"addresses\" or \"addressRange\" shall be present. NOTE 3: If the Cp instance represents a subport in a trunk, \"segmentationId\" shall be present. Otherwise it shall not be present. NOTE 4: Depending on the NFVI networking infrastructure, the \"segmentationId\" may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local \"segmentationId\" to whatever \"segmentationId\" is actually used by the NFVI's transport technology.\n",
"required": ["macAddress"]
}, {
"required": ["ipAddresses"]
}],
"properties": {
"macAddress": {
"description": "A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons.\n",
"type": "string",
"format": "MAC"
},
"segmentationId": {
"description": "Identification of the network segment to which the Cp instance connects to. See note 3 and note 4.\n",
"type": "string"
},
"ipAddresses": {
"description": "Addresses assigned to the CP instance. Each entry represents IP addresses assigned by fixed or dynamic IP address assignment per subnet. See note 1.\n",
"type": "array",
"items": {
"type": "object",
"required": ["type"],
"required": ["addresses"]
}, {
"required": ["addressRange"]
}],
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"enum": ["IPV4", "IPV6"]
"description": "Fixed addresses assigned (from the subnet defined by \"subnetId\" if provided). See note 2.\n",
"type": "array",
"items": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g., in case of egress connections. Exactly one of \"addresses\" or \"addressRange\" shall be present. See note 2.\n",
"required": ["minAddress", "maxAddress"],
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
}
},
"type": {
"description": "The type of the IP addresses\n",
"type": "string",
"enum": ["PV4", "PV6"]
},
"addresses": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"isDynamic": {
"description": "Indicates whether this set of addresses was assigned dynamically (true) or based on address information provided as input from the API consumer (false). Shall be present if \"addresses\" is present and shall be absent otherwise.\n",
"type": "boolean"
},
"addressRange": {
"description": "An IP address range used, e.g. in case of egress connections. See note.\n",
"type": "object",
"required": ["minAddress", "maxAddress"],
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
"properties": {
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
},
"minAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"maxAddress": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
},
"subnetId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
},
"virtualCpAddress": {
"description": "This type represents information about a network address that has been assigned to a virtual CP.\n",
"type": "object",
"required": ["type"],
"properties": {
"type": {
"description": "The type of the IP addresses. Permitted values: - IPV4 - IPV6\n",
"type": "string",
"enum": ["IPV4", "IPV6"]
},
"loadBalancerIp": {
"description": "An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons.\n",
"type": "string",
"format": "IP"
}
}
"parentCpId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"vnfLinkPortId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"netAttDefResourceId": {
"description": "Identifier of the \"NetAttDefResourceInfo\" structure that provides the specification of the interface to attach the connection point to a secondary container cluster network. See notes 4 and 5. It shall be present if the internal CP is associated to a VNFC realized by one or a set of OS containers and is connected to a secondary container cluster network. It shall not be present otherwise.\n",
"type": "array",
"items": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
}
},
"metadata": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
},
"metadata": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
},
"vnfVirtualLinkResourceInfo": {
"description": "Information about the virtualised network resources used by the VLs of the VNF instance. See note 5.\n",
"type": "array",
"items": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by an internal VL instance in a VNF instance.\n",
"type": "object",
"required": ["id", "vnfVirtualLinkDescId", "networkResource"],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfVirtualLinkDescId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"networkResource": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"reservationId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfLinkPorts": {
"description": "Links ports of this VL. Shall be present when the linkPort is used for external connectivity by the VNF (refer to VnfLinkPortInfo). May be present otherwise.\n",
"type": "array",
"items": {
"type": "object",
"description": "This type represents a link port of an internal VL of a VNF. It shall comply with the provisions defined in table 6.5.3.64-1.\nNOTE 1: Either cpInstanceId with cpInstanceType set to \"EXT_CP\" or any combination of cpInstanceId with cpInstanceType set to \"VNFC_CP\" and vipCpInstanceId (i.e. one or both of them) shall be present for a VnfLinkPortInfo. In case both cpInstanceId with cpInstanceType set to \"VNFC_CP\" and vipCpInstanceId are present, the two different CP instances share the linkport.\n",
"required": ["id", "resourceHandle"],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"resourceHandle": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"cpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"cpInstanceType": {
"description": "Type of the CP instance that is identified by cpInstanceId. Shall be present if \"cpInstanceId\" is present, and shall be absent otherwise. Permitted values: * VNFC_CP: The link port is connected to a VNFC CP * EXT_CP: The link port is associated to an external CP. See note 1.\n",
"enum": ["VNFC_CP", "EXT_CP"]
},
"vipCpInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"trunkResourceId": {
"description": "An identifier maintained by the VIM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
}
}
}
},
"metadata": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
},
"virtualStorageResourceInfo": {
"description": "Information on the virtualised storage resource(s) used as storage for the VNF instance.\n",
"type": "array",
"items": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance.\n",
"type": "object",
"required": ["id", "virtualStorageDescId", "storageResource"],
"properties": {
"id": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"virtualStorageDescId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"vnfdId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"storageResource": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"reservationId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"metadata": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
},
"mcioInfo": {
"description": "Information on the MCIO(s) representing VNFC instance(s) realized by one or a set of OS containers and created from the same VDU for the VNF instance.\n",
"type": "array",
"items": {
"description": "This type provides information about an MCIO representing the set of VNFC instances realized by one or a set of OS containers which have been created based on the same VDU.\nNOTE 1 The type of MCIO as specified in the declarative descriptor of the MCIO, and that can be read from the CISM. EXAMPLE: In case of MCIOs managed by Kubernetes, the type of MCIO corresponds to the kind property of the declarative descriptor. NOTE 2 If the attribute additionalInfo is present, it may contain runtime information on the actual and desired state of the MCIO(s). NOTE 3 When the container infrastructure service is a Kubernetes® instance, the mcioId is the combined values from the kind and name fields of the Kubernetes® resource object, separated by a slash. Example: \"Deployment/abcd\". NOTE 4 When the container infrastructure service is a Kubernetes® instance, the mcioName is the name field of the resource object.",
"type": "object",
"required": ["mcioId", "mcioName", "mcioNamespace", "vduId", "cismId", "mcioType", "desiredInstances", "availableInstances"],
"properties": {
"mcioId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"mcioName": {
"description": "Human readable name of this MCIO. See note 4.\n",
"type": "string"
},
"mcioNamespace": {
"description": "Namespace of this MCIO.\n",
"type": "string"
},
"vduId": {
"description": "Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.\n",
"type": "string"
},
"cismId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"mcioType": {
"description": "The type of MCIO. Specific values, their semantics and associated MCIO types are defined in clause 6.5.4.13. Additional values are also permitted. See note 1.\n",
"type": "string"
},
"desiredInstances": {
"description": "Number of desired MCIO instances.\n",
"type": "integer"
},
"availableInstances": {
"description": "Number of available MCIO instances\n",
"type": "integer"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
}
}
},
"metadata": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
},
"extensions": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"vnfcSnapshots": {
"description": "Information about VNFC Snapshots constituting this VNF Snapshot.\n",
"type": "array",
"items": {
"description": "This type represents a VNFC Snapshot. It shall comply with the provisions defined in table 6.5.3.77-1. NOTE 1: The identifier of the compute snapshot resource is assigned during creation of a VNFC Snapshot being returned from the VIM as output data in the response message of the individual resource operations. This attribute shall only be present for a VNFC snapshot that has been newly created by the VNFM as a result of the \"Create VNF snapshot task\". NOTE 2: The identifier of the storage snapshot resource is assigned during creation of a VNFC snapshot being returned from the VIM as output data in the response message of the individual resource operations. This attribute shall only be present for a VNFC snapshot with an associated storage resource and that has been newly created by the VNFM as a result of the \"Create VNF snapshot task\".\n",
"required": ["id", "vnfcInstanceId", "triggeredAt", "createdAt", "vnfcInfoId"],
"properties": {
"id": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"vnfcInstanceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"creationStartedAt": {
"description": "Date-time stamp. Representation: String formatted according toas defined by the date-time production in IETF RFC 3339.\n",
"type": "string",
"format": "date-time"
},
"creationFinishedAt": {
"description": "Date-time stamp. Representation: String formatted according toas defined by the date-time production in IETF RFC 3339.\n",
"type": "string",
"format": "date-time"
},
"vnfcResourceInfoId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"computeSnapshotResource": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
"type": "string"
}
}
},
"storageSnapshotResources": {
"description": "Reference to the \"VirtualStorageResourceInfo\" structure in the \"VnfInstance\" structure that represents the virtual storage resource. See note 2.\n",
"type": "array",
"items": {
"type": "object",
"required": ["storageResourceId"],
"properties": {
"storageResourceId": {
"description": "An identifier that is unique for the respective type within a VNF instance, but may not be globally unique.\n",
"type": "string"
},
"storageSnapshotResources": {
"description": "This type represents the information that allows addressing a virtualised resource that is used by a VNF instance or by an NS instance. Information about the resource is available from the VIM.\nNOTE 1:\tThe value set of the \"vimLevelResourceType\" attribute is within the scope of the VIM, the CISM, the WIM or the resource provider and can be used as information that complements the ResourceHandle. When the container infrastructure service is a Kubernetes® instance the vimLevelResourceType is the type of resource, as would correspond to the kind field if the resource is declared in its own Kubernetes® manifest, e.g.: Pod, PersistentVolumeClaim, NetworkAttachmentDefinition. NOTE 2:\tWhen the container infrastructure service is a Kubernetes® instance the resourceId shall be populated in the following way: * For a compute MCIO, it is the instance identifier that Kubernetes® assigns, which is unique cluster wide per resource type. * For a storage MCIO modelled as a persistent volume claim, it is the name of the persistent volume claim, i.e. the value of the claimName field in the Kubernetes® manifest, or a compound name built by Kubernetes® if the persistent volume claim is defined inline in another template instead of in its own manifest. * For a network MCIO representing a NetworkAttachmentDefinition, a Service or an Ingress, it is the value of the metadata.name field in Kubernetes® manifest. \n",
"required": ["resourceId"],
"properties": {
"vimId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceProviderId": {
"description": "An identifier with the intention of being globally unique.\n",
"type": "string"
},
"resourceId": {
"description": "An identifier maintained by the VIM or the CISM or other resource provider. It is expected to be unique within the VIM instance. Representation: string of variable length.\n",
"type": "string"
},
"vimLevelResourceType": {
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
"description": "Additional resource information which is specific to this resource and its type, and which is available from the VIM or the CISM or the resource provider. See note 1.\n",
"type": "string"
},
"vimLevelAdditionalResourceInfo": {
"description": "This type represents additional resource information which resource and resource type specific, and which is available from the VIM or the CISM or the resource provider. NOTE:\tAt least one attribute shall be present. \n",
"type": "object",
"properties": {
"hostName": {
"description": "Name of the host where the resource is allocated. It shall be present for compute resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"persistentVolume": {
"description": "Name of the persistent volume to which the persistent volume claim representing the storage resource is bound. It may be present for storage resources in the scope of the CISM and shall be absent otherwise. See note.\n",
"type": "string"
},
"additionalInfo": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"containerNamespace": {
"description": "The value of the namespace in which the MCIO corresponding to the resource is deployed. This attribute shall be present if the resource is managed by a CISM and it shall be absent otherwise.\n",
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
"type": "string"
}
}
}
}
}
},
"userDefinedData": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
}
},
"userDefinedData": {
"description": "This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 7159.\n",
"type": "object"
}
}
},
"_links": {
"description": "Links to resources related to this resource.\n",
"type": "object",
"required": ["self"],
"properties": {
"self": {
"description": "This type represents a link to a resource.\n",
"type": "object",
"required": ["href"],
"properties": {
"href": {
"description": "URI of a resource referenced from a notification. Should be an absolute URI (i.e. a URI that contains {apiRoot}), however, may be a relative URI (i.e. a URI where the {apiRoot} part is omitted) if the {apiRoot} information is not available.\n",
"type": "string",
"format": "url"
}
}
}
}
}
}