Newer
Older
5001
5002
5003
5004
5005
5006
5007
5008
5009
5010
5011
5012
5013
5014
5015
5016
5017
5018
5019
5020
5021
5022
5023
5024
5025
5026
5027
5028
5029
5030
5031
5032
5033
5034
5035
5036
5037
5038
5039
5040
5041
5042
5043
5044
5045
5046
5047
5048
5049
5050
5051
5052
5053
5054
5055
5056
5057
5058
5059
5060
5061
5062
5063
5064
5065
5066
5067
5068
5069
5070
5071
5072
5073
5074
5075
5076
5077
5078
properties:
vnfInstanceId:
description: >
Identifier of the VNF instance.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vnfdId:
description: >
Identifier of the VNFD which defines the destination VNF Package for the change.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
extVirtualLinks:
description: >
Information about external VLs to connect the VNF to. Entries in the list that are unchanged need not be
supplied as part of this request.
type: array
items:
$ref: "#/definitions/ExtVirtualLinkData"
extManagedVirtualLinks:
description: >
Information about internal VLs that are managed by the NFVO.
type: array
items:
$ref: "#/definitions/ExtManagedVirtualLinkData"
additionalParams:
description: >
Additional parameters passed by the OSS/BSS as input to the change current VNF package process, specific to the
VNF of which the underlying VNF package is changed, as declared in the VNFD as part of "ChangeCurrentVnfPkgOpConfig".
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
extensions:
description: >
If present, this attribute provides modifications to the values of the "extensions" attribute in "VnfInstance",
as defined in clause 6.5.3.57. Provisions for handling extensions during the operation, and needed passed
parameter values in case of conflicts, are defined in clause 5.4.11a.3.1 of ETSI GS NFV-SOL 003.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
vnfConfigurableProperties:
description: >
If present, this attribute provides modifications to the values of the VNF configurable properties attribute in
the "VnfInstance", as defined in clause 6.5.3.57. Provisions for handling VNF configurable properties during the
operation, and needed passed parameter values in case of conflicts, are defined in clause 5.4.11a.3.1 of ETSI
GS NFV-SOL 003.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
DeleteVnfSnapshotData:
description: >
This type specifies the identifier of information of an available VNF Snapshot to be deleted and the identifier of
the related VNF instance of the NS instance. It shall comply with the provisions defined in Table 6.5.3.74-1.
type: object
required:
- vnfInstanceId
- vnfSnapshotInfoId
properties:
vnfInstanceId:
description: >
Identifier of the VNF instance to identify the VNFM holding the VNF Snapshot information to be deleted.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vnfSnapshotInfoId:
description: >
Identifier of information held by the VNFM about the VNF Snapshot to be deleted.
This identifier was allocated by the VNFM.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
RevertVnfToSnapshotData:
description: >
This type specifies the identifier of an existing VNF instance of the NS instance to be reverted and the identifier
of an existing VNF Snapshot to be reverted to. It shall comply with the provisions defined in Table 6.5.3.75-1.
type: object
required:
- vnfInstanceId
- vnfSnapshotInfoId
properties:
vnfInstanceId:
description: >
Identifier of the VNF instance to identify the VNFM holding the VNF Snapshot information to be reverted.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vnfSnapshotInfoId:
description: >
Identifier of information held by the VNFM about the VNF Snapshot to be reverted.
This identifier was allocated by the VNFM.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
additionalParams:
description: >
Additional input parameters for the revert to VNF snapshot process, specific for the VNF being “reverted”,
as declared in the VNFD as part of “RevertToSnapshotVnfOpConfig”.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
5084
5085
5086
5087
5088
5089
5090
5091
5092
5093
5094
5095
5096
5097
5098
5099
5100
5101
5102
5103
5104
5105
5106
5107
5108
5109
5110
5111
5112
5113
5114
5115
5116
5117
5118
5119
5120
5121
5122
5123
5124
5125
5126
5127
CreateVnfSnapshotData:
description: >
This type represents the information that are needed for VNF snapshot creation. When the NFVO invokes the Create
VNF snapshot operation, a set of these parameters are then passed by the NFVO to the VNFM. It shall comply with
the provisions defined in Table 6.5.3.76-1.
type: object
required:
- vnfInstanceId
properties:
vnfInstanceId:
description: >
Identifier of the VNF instance to perform the snapshot from.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
additionalParams:
description: >
Additional input parameters for the snapshot creation process, specific for the VNF being “snapshotted”, as
declared in the VNFD as part of “CreateSnapshotVnfOpConfig”.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
userDefinedData:
description: >
User defined data for the VNF snapshot.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
VnfcSnapshotInfo:
description: >
This type represents a VNFC Snapshot. It shall comply with the provisions defined in table 6.5.3.77-1.
type: object
required:
- id
- vnfcInstanceId
- triggeredAt
- createdAt
- vnfcInfoId
properties:
id:
description: >
Identifier of the information held by the VNFM about a specific VNFC Snapshot. This identifier is allocated by
the VNFM and is unique within the scope of a VNF snapshot.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vnfcInstanceId:
description: >
Identifier of the snapshotted VNFC instance.
$ref: "#/definitions/IdentifierInVnf"
Timestamp indicating when the VNFC Snapshot creation has been started by the VNFM.
$ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"
Timestamp indicating when the VNFC Snapshot has been completed by the VNFM.
$ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"
Reference to the "VnfcResourceInfo" structure that represents the resources of the snapshotted VNFC instance.
A snapshot of that structure is available in the "vnfInstance" attribute of the "VnfSnapshot" structure.
$ref: "#/definitions/IdentifierInVnf"
computeSnapshotResource:
description: >
Reference to a compute snapshot resource.
The identifier of the compute snapshot resource is assigned during creation of a VNFC Snapshot being returned
from the VIM as output data in the response message of the individual resource operations.
This attribute shall only be present for a VNFC snapshot that has been newly created by the VNFM as a result
of the "Create VNF snapshot task".
$ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
storageSnapshotResources:
description: >
Reference to the "VirtualStorageResourceInfo" structure in the "VnfInstance" structure that represents
the virtual storage resource.
type: array
items:
type: object
required:
- storageResourceId
properties:
storageResourceId:
description: >
Reference to the virtual storage resource.
$ref: "#/definitions/IdentifierInVnf"
storageSnapshotResources:
description: >
Reference to a storage snapshot resource.
The identifier of the storage snapshot resource is assigned during creation of a VNFC snapshot being
returned from the VIM as output data in the response message of the individual resource operations.
This attribute shall only be present for a VNFC snapshot with an associated storage resource and that
has been newly created by the VNFM as a result of the "Create VNF snapshot task".
5170
5171
5172
5173
5174
5175
5176
5177
5178
5179
5180
5181
5182
5183
5184
5185
5186
5187
5188
5189
5190
5191
5192
5193
5194
5195
5196
5197
5198
5199
5200
5201
5202
5203
5204
$ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
userDefinedData:
description: >
User defined data for the VNF Snapshot.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
VnfLinkPortData:
description: >
This type represents an externally provided link port to be used to connect a VNFC connection point to an
externally-managed VL. It shall comply with the provisions defined in table 6.5.3.78-1.
type: object
required:
- vnfLinkPortId
- resourceHandle
properties:
vnfLinkPortId:
description: >
Identifier of this link port as provided by the entity that has created the link port.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
resourceHandle:
description: >
Resource handle of the virtualised resource that realizes the link port.
$ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
ModificationsTriggeredByVnfPkgChange:
description: >
This type represents attribute modifications that were performed on an "Individual VNF instance" resource when
changing the current VNF package. The attributes that can be included consist of those requested to be modified
explicitly in the "ChangeCurrentVnfPkgRequest" data structure, and additional attributes of the "VnfInstance" data
structure that were modified implicitly during the operation.
The "ModificationsTriggeredByVnfPkgChange" data type shall comply with the provisions defined in table 6.5.3.79-1.
type: object
properties:
vnfConfigurableProperties:
description: >
This attribute signals the modifications of the "vnfConfigurableProperties" attribute in "VnfInstance"
performed by the operation and shall be present if that attribute was modified during the operation.
This attribute represents the delta (semantics as per IETF RFC 7396 [11], JSON Merge Patch) between
the value of the attribute at the start of the "Change current VNF package" operation and the value
of the attribute at its completion.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
metadata:
description: >
This attribute signals the modifications of the "metadata" attribute in "VnfInstance" performed by the operation
and shall be present if that attribute was modified during the operation. This attribute represents the delta
(semantics as per IETF RFC 7396, JSON Merge Patch) between the value of the attribute at the start of the
"Change current VNF package" operation and the value of the attribute at its completion.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
extensions:
description: >
This attribute signals the modifications of the "extensions" attribute in "VnfInstance" performed by the operation
and shall be present if that attribute was modified during the operation. This attribute represents the delta
(semantics as per IETF RFC 7396 [11], JSON Merge Patch) between the value of the attribute at the start of the
"Change current VNF package" operation and the value of the attribute at its completion.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
vnfdId:
description: >
If present, this attribute signals the new value of the "vnfdId" attribute in "VnfInstance".
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vnfProvider:
description: >
If present, this attribute signals the new value of the "vnfProvider" attribute in "VnfInstance".
If present, this attribute (which depends on the value of the "vnfdId" attribute) was modified implicitly
during the related operation, and contains a copy of the value of the related attribute from the VNFD in the
VNF Package identified by the "vnfdId" attribute.
type: string
vnfProductName:
description: >
If present, this attribute signals the new value of the "vnfProductName" attribute in "VnfInstance".
If present, this attribute (which depends on the value of the "vnfdId" attribute) was modified implicitly
during the related operation, and contains a copy of the value of the related attribute from the VNFD in the
VNF Package identified by the "vnfdId" attribute.
type: string
vnfSoftwareVersion:
description: >
If present, this attribute signals the new value of the "vnfSoftwareVersion" attribute in "VnfInstance".
If present, this attribute (which depends on the value of the "vnfdId" attribute) was modified implicitly
during the related operation, by copying the value of this attribute from the VNFD in the VNF Package
identified by the "vnfdId" attribute.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Version"
vnfdVersion:
description: >
If present, this attribute signals the new value of the "vnfdVersion" attribute in "VnfInstance".
If present, this attribute (which depends on the value of the "vnfdId" attribute) was modified implicitly
during the related operation, by copying the value of this attribute from the VNFD in the VNF Package
identified by the "vnfdId" attribute.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Version"
WanConnectionProtocolData:
description: >
This type provides protocol specific information used to connect the comprising network resources realizing a VL,
e.g., when the VL is deployed on several sites and across a WAN. This type supports signalling input information
about both pre-provisioned WAN connectivity realized by external entities to NFV-MANO, as well as for the creation
of MSCS under NFV-MANO responsibility (i.e., when connectivity is realized when NFVO communicates with the WIM).
It shall comply with the provisions defined in table 6.5.3.81-1.
anyOf:
- required:
- mscsInfo
- required:
- connectivityServiceEndpointConfigDatas
- required:
- mscsConfigData
5273
5274
5275
5276
5277
5278
5279
5280
5281
5282
5283
5284
5285
5286
5287
5288
5289
5290
5291
5292
5293
5294
5295
5296
5297
5298
5299
5300
5301
5302
5303
5304
5305
5306
5307
5308
5309
5310
5311
5312
5313
5314
5315
5316
5317
5318
5319
5320
properties:
mscsInfo:
description: >
Information about the pre-provisioned multi-site connectivity service (MSCS), if already available.
At least one of these attributes shall be present. Annex E documents the applicability of certain attributes
depending on the WAN and NFVI-PoP network management and the responsibilities of NFV-MANO in its provisioning.
$ref: "#/definitions/MscsInfo"
connectivityServiceEndpointConfigDatas:
description: >
Configuration data for the network resources in the NFVI-PoP.
At least one of these attributes shall be present. Annex E documents the applicability of certain attributes
depending on the WAN and NFVI-PoP network management and the responsibilities of NFV-MANO in its provisioning.
type: array
items:
$ref: "#/definitions/ConnectivityServiceEndpointInfo"
mscsConfigData:
description: >
Configuration data for the provisioning of the MSCS, if such MSCS is to be created by NFV-MANO.
At least one of these attributes shall be present. Annex E documents the applicability of certain attributes
depending on the WAN and NFVI-PoP network management and the responsibilities of NFV-MANO in its provisioning.
$ref: "#/definitions/MscsConfigData"
MscsInfo:
description: >
This type provides information about an already provisioned multi-site connectivity service (MSCS) deployed across
a WAN. It shall comply with the provisions defined in Table 6.5.3.82-1.
type: object
required:
- mscsId
- mscsType
properties:
mscsId:
description: >
Identifier of the MSCS established over the WAN.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
mscsName:
description: >
Human readable name of the MSCS.
type: string
mscsDescription:
description: >
Human readable description of the MSCS.
type: string
mscsType:
description: >
The type of connectivity that is provided to the virtualized networks in the NFVI-PoP and characterizes the
connectivity service across the WAN.
Permitted values:
type: string
enum:
- L2VPN
- L3VPN
mscsLayerProtocol:
description: >
Type of underlying connectivity service and protocol associated to the MSCS.
Permitted values are as listed below and restricted by the type of MSCS:
- EVPN_BGP_MPLS: as specified in IETF RFC 7432. Only applicable for mscsType="L2".
- EVPN_VPWS: as specified in IETF RFC 8214. Only applicable for mscsType="L2".
- VPLS_BGP: as specified in IETF RFC 4761 and IETF RFC 6624. Only applicable for mscsType="L2".
- VPLS_LDP_L2TP: as specified in IETF RFC 4762. Only applicable for mscsType="L2".
- VPWS_LDP_L2TP: as specified in IETF RFC 6074. Only applicable for mscsType="L2".
- BGP_IP_VPN: BGP/MPLS based IP VPN as specified in IETF RFC 4364. Only applicable for mscsType="L3".
type: string
enum:
- EVPN_BGP_MPLS
- EVPN_VPWS
5341
5342
5343
5344
5345
5346
5347
5348
5349
5350
5351
5352
5353
5354
5355
5356
5357
5358
5359
5360
5361
5362
5363
5364
5365
5366
5367
5368
5369
5370
5371
5372
5373
5374
5375
5376
5377
5378
5379
5380
5381
5382
5383
5384
5385
5386
5387
5388
5389
5390
5391
5392
5393
5394
5395
5396
5397
5398
5399
5400
5401
5402
5403
5404
5405
5406
5407
5408
5409
5410
5411
5412
5413
5414
5415
5416
5417
5418
5419
5420
5421
5422
5423
5424
5425
5426
5427
5428
5429
5430
5431
5432
5433
5434
5435
5436
5437
5438
5439
5440
5441
5442
5443
5444
5445
5446
5447
5448
5449
5450
5451
5452
5453
5454
5455
5456
5457
5458
5459
5460
5461
5462
5463
5464
5465
5466
5467
5468
5469
5470
5471
5472
5473
5474
5475
5476
5477
5478
5479
5480
5481
5482
5483
5484
5485
5486
5487
5488
5489
5490
5491
5492
5493
5494
5495
5496
5497
5498
5499
5500
5501
5502
5503
5504
5505
5506
5507
5508
5509
- VPLS_BGP
- VPLS_LDP
- VPWS
- BGP_IP_VPN
siteAccessProtectionSchemes:
description: >
Information to determine the proper MSCS endpoints configuration to fulfil certain resiliency/protection
requirements, e.g., by considering certain availability and redundancy of connectivity service endpoints
in between NFVI-PoP and WAN.
type: array
items:
type: object
properties:
locationConstraints:
description: >
Defines the location constraints according to an NFVI-PoP (site).
$ref: "#/definitions/LocationConstraints"
protectionScheme:
description: >
Defines the protection scheme.
Permitted values:
- UNPROTECTED: to indicate no protection.
- ONE_TO_ONE: to indicate an active-passive access protection.
- ONE_PLUS_ONE: to indicate an active-active access protection.
- ONE_TO_N: to indicate an N active to 1 passive access protection.
type: string
enum:
- UNPROTECTED
- ONE_TO_ONE
- ONE_PLUS_ONE
- ONE_TO_N
mtuMscs:
description: >
Maximum Transmission Unit (MTU) that can be forwarded over the MSCS (in bytes). Default value is "1500" (bytes).
type: number
mscsEndpoints:
description: >
Information about the MSCS endpoints of the MSCS.
type: array
items:
$ref: "#/definitions/MscsEndpointInfo"
MscsEndpointInfo:
description: >
This type provides encapsulates information about an MSCS endpoint of the MSCS. It shall comply with the provisions
defined in table 6.5.3.83-1.
type: object
required:
- mscsEndpointId
- directionality
- connectivityServiceEndpoinId
properties:
mscsEndpointId:
description: >
Identifier of the MSCS endpoint.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
directionality:
description: >
Directionality of the data traffic in the context of the terminating MSCS endpoint from WAN’s perspective.
Permitted values:
- INBOUND: to indicate into the WAN.
- OUTBOUND: to indicate from the WAN.
- BOTH: to indicate bidirectional data traffic to/from the WAN.
type: string
enum:
- INBOUND
- OUTBOUND
- BOTH
connectivityServiceEndpoinId:
description: >
References the connectivity service endpoint configuration information applicable to support the MSCS endpoint.
More than one connectivity service endpoint can be referred when endpoints are in LAG mode.
type: array
items:
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
ConnectivityServiceEndpointInfo:
description: >
This type provides configuration data for the NFVI-PoP network gateway providing connectivity service endpoints.
The connectivity service endpoints are used as endpoints by an MSCS. It shall comply with the provisions defined
in Table 6.5.3.84-1.
type: object
required:
- connectivityServiceEndpointId
- vimId
properties:
connectivityServiceEndpointId:
description: >
Identifier of the connectivity service endpoint of the NFVI-PoP (site) providing the UNI in between the
NFVI-PoP and the WAN.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vimId:
description: >
Identifier of the VIM responsible for the management of the virtualized networks in the NFVI-PoP of the
applicable VL, and for which the connection data is applicable.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
siteToWanLayer2ProtocolData:
description: >
Layer 2 protocol specific information for the configuration of the NFVI-PoP network gateway to enable the
stitching of the intra-site VN to the MSCS over the WAN.
$ref: "#/definitions/SiteToWanLayer2ProtocolData"
siteToWanLayer3ProtocolData:
description: >
Layer 3 protocol specific information for the configuration of NFVI-PoP network gateway to enable the stitching
of the intra-site VN to the MSCS over the WAN.
$ref: "#/definitions/SiteToWanLayer3ProtocolData"
SiteToWanLayer2ProtocolData:
description: >
This type provides information about Layer 2 protocol specific information for the configuration of the NFVI-PoP
network gateway to enable the stitching of the intra-site VN to the MSCS over the WAN. It shall comply with the
provisions defined in Table 6.5.3.85-1.
type: object
required:
- layer2ConnectionInfo
properties:
layer2ConnectionInfo:
description: >
Layer 2 protocol parameters of the connectivity service endpoint (CSE).
type: object
required:
- connectionType
- interfaceType
- interfaceTagging
- encapsulationType
properties:
connectionType:
description: >
The type of connection to be established on the connectivity service point.
Permitted values:
- CSE: defined by the characteristics of the existing referred connectivity service point.
- AGGREGATE_CSE: create an aggregation of the connectivity service endpoints.
type: string
enum:
- CSE
- AGGREGATE_CSE
interfaceType:
description: >
To indicate whether to create logical interfaces on the referred connectivity service endpoint or new
aggregated connectivity service endpoint.
Permitted values:
- PARENT: use the mapped interface to the connectivity service endpoint as is, i.e., do not create logical interfaces.
- LOGICAL: create logical interfaces.
type: string
enum:
- PARENT
- LOGICAL
interfaceTagging:
description: >
The type of frames to forward on the connectivity service point.
Permitted values:
- UNTAGGED: an interface where frames are not tagged.
- TAGGED: an interface configured to forward tagged frames (i.e., enabled for VLAN tagging).
type: string
enum:
- UNTAGGED
- TAGGED
encapsulationType:
description: >
The type of encapsulation. If the interfaceTagging="TAGGED", either "VLAN" or "VXLAN" shall be set.
Permitted values:
- ETH: generic Ethernet encapsulation.
- VLAN: encapsulation based on VLAN.
- VXLAN: encapsulation based on VXLAN.
type: string
enum:
- ETH
- VLAN
- VXLAN
Type of encapsulation method for VLAN tagging. Shall be present if interfaceTagging="TAGGED" and
encapsulationType="VLAN".
- DOT1Q: used when packets on the CSE are encapsulated with one or a set of customer VLAN identifiers.
- QINQ: used when packets on the CSE are encapsulated with multiple customer VLAN identifiers and a single
service VLAN identifier.
- QINANY: used when packets on the CSE have no specific customer VLAN and a service VLAN identifier is used.
type: string
enum:
- DOT1Q
- QINQ
wanSegmentIds:
description: >
Segment identifiers to pass on the tagged interface. Shall be present if encapsulationType="VLAN" or “VXLAN".
type: object
required:
- wanSegmentIdValue
properties:
wanSegmentIdValue:
description: >
Identifier of the network segment (e.g., VLAN id or VNI).
type: string
wanSegmentIdUpperRange:
description: >
Identifier of the upper range network segment, in case the "wanSegmentIds" is used to define a range.
type: string
5539
5540
5541
5542
5543
5544
5545
5546
5547
5548
5549
5550
5551
5552
5553
5554
5555
5556
5557
5558
5559
5560
5561
5562
5563
vxlanConfig:
description: >
Additional configuration needed when using VXLAN encapsulation. Shall be present if interfaceTagging="TAGGED"
and encapsulationType="VXLAN".
type: object
required:
- peerMode
properties:
peerMode:
description: >
Type of VXLAN access mode. Default value is "STATIC".
Permitted values:
- STATIC
- BGP_EVPN
type: string
enum:
- STATIC
- BGP_EVPN
peers:
description: >
List of IP addresses of VTEP peers when using static mode.
type: array
items:
$ref: "#/definitions/IpAddress"
5564
5565
5566
5567
5568
5569
5570
5571
5572
5573
5574
5575
5576
5577
5578
5579
5580
5581
5582
5583
5584
5585
5586
5587
5588
5589
5590
5591
5592
lagInterfaceData:
description: >
Information for setting up a LAG interface aggregating multiple connectivity service endpoints.
type: object
required:
- aggregatedEndpoints
- lacpActivation
- lacpConfig
properties:
aggregatedEndpoints:
description: >
List of the connectivity service endpoints that are to be aggregated. Shall be present if
connectionType="AGGREGATE_CSE". In case of aggregating connectivity service endpoints, only one
SiteToWanLayer2ProtocolData shall be provided for the whole set of aggregated endpoints.
type: array
items:
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
lacpActivation:
description: >
Indicates whether to activate LACP on the interface. If "TRUE", the LACP is to be activated, or "FALSE"
otherwise. Default value is "FALSE".
type: boolean
lacpConfig:
description: >
Specific configuration for the LACP. Examples include configuration to indicate the minimum number of
active connectivity service endpoints, the time internal and priority of LACP packet data units (PDU).
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
layer2ControlProtocol:
description: >
Configuration enabling the L2 control protocol in between the NFVI-PoP network gateway and the WAN.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
mtuL2:
description: >
Maximum Transmission Unit (MTU) that can be forwarded at layer 2 (in bytes). Default value is "1500" (bytes).
virtualRoutingAndForwarding:
description: >
Configuration related to the L2 virtual routing and forwarding (MAC-VRF).
type: object
required:
- macVrfName
properties:
macVrfName:
description: >
Name (or identifier) of the MAC-VRF instance.
type: string
forwardingConfig:
description: >
Information related to the forwarding of the VN in the NFVI-PoP to the connectivity service endpoint,
if information about the VN to "stitch" is already known. . by the OSS/BSS. Shall not be provided otherwise,
in which case the NFVO will infer the forwarding configuration based on the NS VL, or external VL, or
externally-managed VL provisioning.
oneOf:
- required:
- networkResources
- required:
- vnSegmentIds
5622
5623
5624
5625
5626
5627
5628
5629
5630
5631
5632
5633
5634
5635
5636
5637
5638
5639
5640
5641
5642
5643
5644
5645
5646
5647
5648
5649
5650
5651
5652
5653
5654
5655
5656
5657
5658
5659
5660
5661
5662
5663
5664
5665
5666
5667
5668
5669
5670
5671
5672
5673
5674
5675
5676
5677
5678
properties:
networkResources:
description: >
Reference to the VN resource to be forwarded into/from the MSCS.
Either "networkResources" or "vnSegmentsIds" shall be provided, but not both.
type: array
items:
$ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
vnSegmentIds:
description: >
Identifiers of the network segments of the VN resources to be forwarded into/from the MSCS.
type: object
required:
- vnSegmentIdValue
properties:
vnSegmentIdValue:
description: >
Identifier of the network segment.
type: string
vnSegmentIdUpperRange:
description: >
Identifier of the upper range network segment, in case the "vnSegmentIds" is used to define a range.
type: string
SiteToWanLayer3ProtocolData:
description: >
This type provides information about Layer 3 protocol specific information for the stitching of the intra-site VN
to the multi-site connectivity service over the WAN. It shall comply with the provisions defined in Table 6.5.3.86-1.
type: object
required:
- routingInfo
properties:
logicalInterfaceIpAddress:
description: >
IP addressing information associated to a logical interface. Shall be present if the "interfaceType" of the
SiteToWanLayer2ProtocolData is equal to "LOGICAL".
type: object
required:
- ipAddress
- associatedSegmentId
properties:
ipAddress:
description: >
The IP address to be assigned to the interface.
$ref: "#/definitions/IpAddress"
associatedSegmentId:
description: >
The associated segment identifier that has triggered the creation of the logical interface.
The value shall be one of the values listed in the "wanSegmentIds" of the "siteToWanLayer2ProtocolData".
type: string
routingInfo:
description: >
The routing information that is activated on the connectivity service endpoint. More than one "routingInfo" is
allowed to enable stacking different routing protocols (e.g., one routing protocol for IPv4 and another one for IPv6).
type: object
required:
- routingProtocol
5680
5681
5682
5683
5684
5685
5686
5687
5688
5689
5690
5691
5692
5693
5694
5695
5696
5697
5698
5699
5700
5701
5702
5703
5704
5705
5706
5707
5708
5709
5710
5711
5712
5713
5714
5715
5716
5717
5718
5719
5720
5721
5722
5723
5724
5725
5726
5727
5728
5729
5730
5731
5732
5733
5734
5735
5736
5737
5738
5739
5740
5741
5742
5743
5744
5745
5746
5747
5748
5749
properties:
routingProtocol:
description: >
The routing protocol that is activated on the connectivity service endpoint.
Permitted values:
- BGP: used for dynamic routing BGPv4.
- RIP: used for dynamic routing RIPv2.
- OSPF: used for dynamic routing (OSPF version 2 for IPv4; and OSPF version 3 for IPv6).
- STATIC: used for static routing.
- DIRECT: used when the NFVI-PoP network is directly connected to the WAN provider network.
- VRRP: used when the NFVI-PoP network is directly connected to the WAN provider network with virtual
router redundancy protocol support (VRRP).
type: string
enum:
- BGP
- RIP
- OSPF
- STATIC
- DIRECT
- VRRP
staticRouting:
description: >
Defines a static route. It shall only be present if the routingProtocol="STATIC".
type: object
required:
- ipVersion
- ipPrefix
- prefixSize
- nextHop
properties:
ipVersion:
description: >
The IP version applicable to the routing entry.
Permitted values:
- IPV4
- IPV6
type: string
enum:
- IPV4
- IPV6
ipPrefix:
description: >
The IP network prefix.
$ref: '#/definitions/IpAddress'
prefixSize:
description: >
The IP prefix size.
type: number
nextHop:
description: >
The next hop’s IP address.
$ref: '#/definitions/IpAddress'
routingAddressFamily:
description: >
The IP version applicable to the dynamic routing protocol. Shall be present for dynamic routing protocols.
Permitted values:
- IPV4
- IPV6
type: string
enum:
- IPV4
- IPv6
ospfRouting:
description: >
Defines parameters for OSPF routing. It shall only be present if the routingProtocol="OSPF".
type: object
required:
- areaId
properties:
areaId:
5751
5752
5753
5754
5755
5756
5757
5758
5759
5760
5761
5762
5763
5764
5765
5766
5767
5768
5769
5770
5771
5772
5773
5774
5775
The routing area identifier, e.g., a number or an IP address.
type: string
bgpRouting:
description: >
Defines parameters for BGP routing. It shall only be present if the routingProtocol="BGP".
type: object
required:
- bgpAs
properties:
bgpAs:
description: >
The Autonomous System (AS) identification applicable to the BGP routing info entry.
type: object
bgpNeighbour:
description: >
The IP address of the BGP neighbour.
$ref: '#/definitions/IpAddress'
bgpAdditionalParam:
description: >
Additional parameters for setting up the BGP neighbour, such as information about the remote AS.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
routeMapsDistribution:
description: >
Maps of routes that are permitted or denied for redistribution.
type: object
5776
5777
5778
5779
5780
5781
5782
5783
5784
5785
5786
5787
5788
5789
5790
5791
5792
5793
5794
5795
5796
5797
5798
5799
5800
5801
required:
- policy
- sequence
- matchAndSetRule
properties:
policy:
description: >
The policy to apply to the route distribution.
Permitted values:
- PERMIT
- DENY
type: string
enum:
- PERMIT
- DENY
sequence:
description: >
Sequence or index number assigned to the route-map.
type: number
matchAndSetRule:
description: >
Set of "match" and "set" rules for the distribution of routing information. "Match" key entries define
the routes that are selected. "Set" key entries define what information to modify when distributing the
routing information.
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
5802
5803
5804
5805
5806
5807
5808
5809
5810
5811
5812
5813
5814
5815
5816
5817
5818
5819
5820
5821
5822
5823
5824
5825
5826
5827
5828
5829
5830
5831
5832
5833
5834
mtuL3:
description: >
Maximum Transmission Unit (MTU) that can be forwarded at layer 3 (in bytes). Default value is "1500" (bytes).
type: number
virtualRoutingAndForwarding:
description: >
Configuration related to the virtual routing and forwarding (VRF).
type: object
required:
- vrfName
properties:
vrfName:
description: >
Name (or identifier) of the VRF instance.
type: string
bfdConfig:
description: >
Configuration related to bidirectional forwarding detection (BFD).
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
MscsConfigData:
description: >
This type provides configuration data for the creation of an MSCS. It shall comply with the provisions defined in
Table 6.5.3.87-1.
type: object
required:
- mscsType
properties:
mscsType:
description: >
The type of connectivity that is requested to be provided to the virtualized networks in the NFVI-PoP and
characterizes the connectivity service across the WAN.
Permitted values:
type: string
enum:
5841
5842
5843
5844
5845
5846
5847
5848
5849
5850
5851
5852
5853
5854
5855
5856
5857
5858
5859
5860
5861
5862
5863
5864
5865
5866
5867
5868
5869
5870
5871
5872
5873
5874
5875
5876
5877
5878
5879
5880
5881
5882
5883
5884
5885
5886
5887
5888
5889
5890
5891
5892
5893
5894
5895
5896
siteAccessProtectionSchemes:
description: >
Information to determine the proper MSCS endpoints configuration to fulfil certain resiliency/protection
requirements, e.g., by considering certain availability and redundancy of connectivity service endpoints in
between NFVI-PoP and WAN.
type: array
items:
type: object
required:
- locationConstraints
- protectionScheme
properties:
locationConstraints:
description: >
Defines the location constraints according to an NFVI-PoP (site).
$ref: '#/definitions/LocationConstraints'
protectionScheme:
description: >
Defines the protection scheme.
Permitted values:
- UNPROTECTED
- ONE_TO_ONE
- ONE_PLUS_ONE
- ONE_TO_N
type: string
enum:
- UNPROTECTED
- ONE_TO_ONE
- ONE_PLUS_ONE
- ONE_TO_N
mtuMscs:
description: >
Maximum Transmission Unit (MTU) that can be forwarded over the MSCS (in bytes). Default value is "1500" (bytes).
type: number
wanLayer2ProtocolData:
description: >
Layer 2 protocol specific information for the configuration of the multi-site connectivity service over the WAN.
$ref: '#/definitions/WanLayer2ProtocolData'
wanLayer3ProtocolData:
description: >
Layer 3 protocol specific information for the configuration of the multi-site connectivity service over the WAN.
$ref: '#/definitions/WanLayer3ProtocolData'
WanLayer2ProtocolData:
description: >
This type provides information about Layer 2 protocol specific information for the configuration of the MSCS over
the WAN. It shall comply with the provisions defined in Table 6.5.3.88-1.
type: object
required:
- isSegmentPreservation
- isSegmentCosPreservation
properties:
mscsLayer2Protocol:
description: >
Type of underlying connectivity service and protocol associated to the type of MSCS.
Permitted values are as listed below and restricted by the type of MSCS:
- EVPN_BGP_MPLS: as specified in IETF RFC 7432.
- EVPN_VPWS: as specified in IETF RFC 8214.
- VPLS_BGP: as specified in IETF RFC 4761 and IETF RFC 6624.
- VPLS_LDP_L2TP: as specified in IETF RFC 4762 and IETF RFC 6074.
- VPWS_LDP_L2TP: as specified in IETF RFC 6074.
type: string
enum:
- EVPN_BGP_MPLS
- EVPN_VPWS
- VPLS_LDP_L2TP
- VPWS_LDP_L2TP
5909
5910
5911
5912
5913
5914
5915
5916
5917
5918
5919
5920
5921
5922
5923
5924
5925
5926
5927
5928
5929
5930
5931
5932
5933
5934
5935
5936
5937
5938
5939
5940
5941
5942
5943
5944
5945
5946
5947
5948
5949
5950
5951
5952
5953
5954
5955
5956
5957
5958
5959
5960
5961
5962
5963
5964
5965
5966
5967
5968
5969
5970
5971
5972
5973
5974
5975
5976
5977
5978
5979
5980
5981
5982
5983
5984
5985
5986
5987
5988
5989
5990
5991
5992
5993
5994
5995
5996
5997
5998
5999
6000
isSegmentPreservation:
description: >
Indicates the requirement of whether to ensure network segment (e.g., VLAN id) preservation across the MSCS
endpoints (i.e., from/to the NFVI-PoPs). If "TRUE", segment identifiers shall be preserved, "FALSE" otherwise.
Default value is "FALSE".
type: boolean
isSegmentCosPreservation:
description: >
Indicates the requirement of whether to ensure network segment class of service preservation across the MSCS
endpoints (i.e., from/to the NFVI-PoPs). If "TRUE", segment class of service shall be preserved, "FALSE" otherwise.
Default value is "FALSE".
type: boolean
WanLayer3ProtocolData:
description: >
Type of underlying connectivity service and protocol associated to the type of MSCS.
Permitted values are as listed below and restricted by the type of MSCS:
- BGP_IP_VPN: BGP/MPLS based IP VPN as specified in IETF RFC 4364.
type: string
enum:
- BGP_IP_VPN
ModifyWanConnectionInfoData:
description: >
This type represents attribute modifications for WAN connection information. The attributes of the "WanConnectionInfo"
that can be modified according to the provisions of the "UpdateNsRequest" in clause 6.5.2.12 related to WAN connection
information are included in the "ModifyWanConnectionInfoData" data type. It shall comply with the provisions defined
in table 6.5.3.92-1.
type: object
required:
- wanConnectionInfoId
properties:
wanConnectionInfoId:
description: >
Identifier of the WAN connection information to modify.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
mscsName:
description: >
New value of the "mscsName" attribute in "MscsInfo", or "null" to remove the attribute.
type: string
mscsDescription:
description: >
New value of the "mscsDescription" attribute in "MscsInfo", or "null" to remove the attribute.
type: string
mscsEndpoints:
description: >
New content of certain entries of MSCS endpoints in the "mscsEndpoints" attribute in "MscsInfo",
as defined below this table.
type: array
items:
$ref: "#/definitions/MscsEndpointInfo"
removeMscsEndpointIds:
description: >
List of identifier entries to be deleted from the "mscsEndpoints" attribute array in "MscsInfo", to be used
as "deleteIdList" as defined below this table.
type: array
items:
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
connectivityServiceEndpoints:
description: >
New content of certain entries of connectivity service endpoints in the "connectivityServiceEndpointInfos"
attribute in "WanConnectionProtocolInfo", as defined below this table.
type: array
items:
$ref: "#/definitions/ConnectivityServiceEndpointInfo"
removeConnectivityServiceEndpoints:
description: >
List of identifier entries to be deleted from the "connectivityServiceEndpointInfos" attribute array in
"WanConnectionProtocolInfo", to be used as "deleteIdList" as defined below this table.
type: array
items:
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
WanConnectionInfoModification :
description: >
This type represents attribute modifications that were performed on WAN connection information.
The attributes that can be included consist of those requested to be modified explicitly with the "UpdateNsRequest"
data structure. It shall comply with the provisions defined in table 6.5.3.93-1.
type: object
required:
- wanConnectionInfoId
properties:
wanConnectionInfoId:
description: >
Identifier of the WAN connection information that has been modified.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
mscsName:
description: >
If present, this attribute signals modifications of the "mscsName" attribute in "MscsInfo" as defined in
clause 6.5.3.82.
type: string
mscsDescription: