SOL005NSLifecycleManagement_def.yaml

# Copyright (c) ETSI 2017.
# https://forge.etsi.org/etsi-forge-copyright-notice.txt
definitions:

  HealNsRequest:
    description: >
      This type represents request parameters for the "Heal NS" operation. This operation supports the healing of an NS
      instance, either by healing the complete NS instance or by healing one of more of the VNF instances that are part of this
      NS. It shall comply with the provisions defined in Table 6.5.2.13-1.
      Either the parameter healNsData or the parameter healVnfData, but not both shall be provided.
    type: object
    oneOf:
      - required:
          - healNsData
      - required:
          - healVnfData
    properties:
      healNsData:
        description: >
          Provides the information needed to heal an NS. See note
        $ref: "#/definitions/HealNsData"
      healVnfData:
        description: >
          Provides the information needed to heal a VNF. See note.
        type: array
        items:
          $ref: "#/definitions/HealVnfData"

  CancelMode:
    description: >
      This type represents a parameter to select the mode of canceling an ongoing NS LCM operation occurrence. 
      It shall comply with the provisions defined in Table 6.5.2.16-1.
    type: object
    required:
      - cancelMode
    properties:
      cancelMode:
        description: >
          Cancellation mode to apply.
        $ref: "#/definitions/CancelModeType"

  HealNsData:
    description: >
      This type represents the information used to heal a NS. 
      It shall comply with the provisions defined in Table 6.5.3.43-1.
    type: object
    required:
      - degreeHealing
    oneOf:
      - required:
          - actionsHealing
      - required:
          - healScript
    properties:
      degreeHealing:
        description: >
          Indicates the degree of healing. Possible values
          include:
          - HEAL_RESTORE: Complete the healing of
          the NS restoring the state of the NS before
          the failure occurred
          - HEAL_QOS: Complete the healing of the NS
          based on the newest QoS values
          - HEAL_RESET: Complete the healing of the
          NS resetting to the original instantiation state of the NS
          - PARTIAL_HEALING
        type: string
        enum:
          - HEAL_RESTORE
          - HEAL_QOS
          - HEAL_RESET
          - PARTIAL_HEALING
      actionsHealing:
        description: >
          Used to specify dedicated healing actions in a
          particular order (e.g. as a script). The actionsHealing
          attribute can be used to provide a specific script whose
          content and actions might only be possible to be
          derived during runtime.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/String"
      healScript:
        description: >
          Reference to a script from the NSD that shall be used
          to execute dedicated healing actions in a particular
          order. The healScript, since it refers to a script in the
          NSD, can be used to execute healing actions which
          are defined during NS design time.
        $ref: "#/definitions/IdentifierInNsd"
      additionalParamsforNs:
        description: >
          Allows the OSS/BSS to provide additional
          parameter(s) to the healing process at the NS level.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"

  HealVnfData:
    description: >
      This type represents the information to heal a VNF that is part of an NS. 
      The NFVO shall then invoke the Heal VNF operation towards the appropriate VNFM.
      It shall comply with the provisions defined in Table 6.5.3.44-1.
    type: object
    required:
      - vnfInstanceId
    properties:
      vnfInstanceId:
        description: >
          Identifies the VNF instance, part of the NS, requiring a
          healing action.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      cause:
        description: >
          Indicates the reason why a healing procedure is required.
        type: string
      additionalParams:
        description: >
          Additional parameters passed by the NFVO as input to
          the healing process, specific to the VNF being healed.
          EXAMPLE: Input parameters to VNF-specific healing procedures.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"

  TerminateNsRequest:
    description: >
      This type represents a NS termination request. 
      It shall comply with the provisions defined in Table 6.5.2.15-1.
    type: object
    properties:
      terminationTime:
        description: >
          Timestamp indicating the end time of the NS, i.e. the NS
          will be terminated automatically at this timestamp.
          Cardinality "0" indicates the NS termination takes place immediately
        $ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"

  CreateNsRequest:
    type: object
    required:
      - nsdId
      - nsName
      - nsDescription
    properties:
      nsdId:
        description: >
          Identifier of the NSD that defines the NS instance to be
          created.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsName:
        description: >
          Human-readable name of the NS instance to be created.
        type: string
      nsDescription:
        description: >
          Human-readable description of the NS instance to be created.
        type: string

  CancelModeType:
    description: >
      Cancellation mode.

      The NFVO shall not start any new VNF lifecycle management and resource
      management operation, and shall wait for the ongoing VNF lifecycle management
      and resource management operations in the underlying system, typically the VNFM
      and VIM, to finish execution or to time out. After that, the NFVO shall put the
      operation occurrence into the FAILED_TEMP state.

      The NFVO shall not start any new VNF lifecycle management and resource
      management operation, shall cancel the ongoing VNF lifecycle management and
      resource management operations in the underlying system, typically the VNFM and
      VIM, and shall wait for the cancellation to finish or to time out. After that, the NFVO
      shall put the operation occurrence into the FAILED_TEMP state.
    type: string
    enum:
      - GRACEFUL
      - FORCEFUL

  NsInstance:
    description: >
      This type represents a response for Query NS operation. 
      It shall comply with the provisions defined in Table 6.5.2.10-1.
    type: object
    required:
      - id
      - nsInstanceName
      - nsInstanceDescription
      - nsdId
      - nsdInfoId
      - nsState
      - _links
    properties:
      id:
        description: >
          Identifier of the NS instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsInstanceName:
        description: >
          Human readable name of the NS instance.
        type: string
      nsInstanceDescription:
        description: >
          Human readable description of the NS instance.
        type: string
      nsdId:
        description: >
          Identifier of the NSD on which the NS instance is based. The value is copied from the NSD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsdInfoId:
        description: >
          Identifier of the NSD information object on which the
          NS instance is based. This identifier has been allocated by the NFVO.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      flavourId:
        description: >
          Identifier of the NS deployment flavor applied to
          the NS instance. This attribute shall be present if the nsState attribute
          value is INSTANTIATED.
        $ref: "#/definitions/IdentifierInNsd"
      vnfInstance:
        description: >
          Information on constituent VNF(s) of the NS instance.
        type: array
        items:
          $ref: "#/definitions/VnfInstance"
      pnfInfo:
        description: >
          Information on the PNF(s) that are part of the NS instance.
        type: array
        items:
          $ref: "#/definitions/PnfInfo"
      virtualLinkInfo:
        description: >
          Information on the VL(s) of the NS instance.
          This attribute shall be present if the nsState attribute
          value is INSTANTIATED and if the NS instance has
          specified connectivity.
        type: array
        items:
          $ref: "#/definitions/NsVirtualLinkInfo"
      vnffgInfo:
        description: >
          Information on the VNFFG(s) of the NS instance.
        type: array
        items:
          $ref: "#/definitions/VnffgInfo"
      sapInfo:
        description: >
          Information on the SAP(s) of the NS instance.
        type: array
        items:
          $ref: "#/definitions/SapInfo"
      nestedNsInstanceId:
        description: >
          Identifier of the nested NS(s) of the NS instance.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfSnapshotInfoIds:
        description: >
          Identifier of information on VNF snapshots of VNF instances that are part of this NS instance.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsState:
        description: >
          The state of the NS instance.
          Permitted values:
          NOT_INSTANTIATED: The NS instance is
          terminated or not instantiated.
          INSTANTIATED: The NS instance is instantiated.
        type: string
        enum:
          - NOT_INSTANTIATED
          - INSTANTIATED
      monitoringParameter:
        description: >
          Performance metrics tracked by the NFVO (e.g. for
          auto-scaling purposes) as identified by the NS
          designer in the NSD.
        type: array
        items:
          $ref: "#/definitions/NsMonitoringParameter"
      nsScaleStatus:
        description: >
          Status of each NS scaling aspect declared in the
          applicable DF, how "big" the NS instance has been
          scaled w.r.t. that aspect.
          This attribute shall be present if the nsState attribute
          value is INSTANTIATED.
        type: array
        items:
          $ref: "#/definitions/NsScaleInfo"
      additionalAffinityOrAntiAffinityRule:
        description: >
          Information on the additional affinity or anti-affinity
          rule from NS instantiation operation. Shall not
          conflict with rules already specified in the NSD.
        type: array
        items:
          $ref: "#/definitions/AffinityOrAntiAffinityRule"
      wanConnectionInfo:
        description: >
          Information about WAN related connectivity enabling multi-site VLs.
        type: array
        items:
          $ref: "#/definitions/WanConnectionInfo"
      _links:
        type: object
        description: Links to resources related to this resource.
        required:
          - self
        properties:
          self:
            description: >
              URI of this resource.
            $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          nestedNsInstances:
            description: >
              Links to resources related to this notification.
            type: array
            items:
              $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          vnfSnapshotInfos:
            description: >
              Links to the VNF snapshots associated to VNF instances which are part of this NS instance.
            type: array
            items:
              $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          instantiate:
            description: >
              Link to the "instantiate" task resource, if the related
              operation is possible based on the current status of
              this NS instance resource (i.e. NS instance in
              NOT_INSTANTIATED state).
            $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          terminate:
            description: >
              Link to the "terminate" task resource, if the related
              operation is possible based on the current status of
              this NS instance resource (i.e. NS instance is in
              INSTANTIATED state).
            $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          update:
            description: >
              Link to the "update" task resource, if the related
              operation is possible based on the current status of
              this NS instance resource (i.e. NS instance is in
              INSTANTIATED state).
            $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          scale:
            description: >
              Link to the "scale" task resource, if the related
              operation is supported for this NS instance, and is
              possible based on the current status of this NS
              instance resource (i.e. NS instance is in
              INSTANTIATED state).
            $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
          heal:
            description: >
              Link to the "heal" task resource, if the related
              operation is supported for this NS instance, and is
              possible based on the current status of this NS
              instance resource (i.e. NS instance is in
              INSTANTIATED state).
            $ref: "../../definitions/SOL005_def.yaml#/definitions/Link"

  VnfInstance:
    description: >
      This type represents a VNF instance.
      Clause B.3.2 of ETSI GS NFV-SOL 003 [4] provides examples illustrating the relationship among the
      different run-time information elements (CP, VL and link ports) used to represent the connectivity of a
      VNF.
    type: object
    required:
      - id
      - vnfdId
      - vnfProvider
      - vnfProductName
      - vnfSoftwareVersion
      - vnfdVersion
      - vnfPkgId
      - instantiationState
    properties:
      id:
        description: >
          Identifier of the VNF instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfInstanceName:
        description: >
          Name of the VNF instance.
          Modifications to this attribute can be requested using the "ModifyVnfInfoData" structure.
        type: string
      vnfInstanceDescription:
        description: >
          Human-readable description of the VNF instance.
          Modifications to this attribute can be requested using the "ModifyVnfInfoData" structure.
        type: string
      vnfdId:
        description: >
          Identifier of the VNFD on which the VNF instance is based.
          Modifications to this attribute can be requested using the "ModifyVnfInfoData" structure.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfProvider:
        description: >
          Provider of the VNF and the VNFD. The value is copied from the VNFD.
        type: string
      vnfProductName:
        description: >
          Name to identify the VNF Product. The value is copied from the VNFD.
        type: string
      vnfSoftwareVersion:
        description: >
          Software version of the VNF. The value is copied from the VNFD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Version"
      vnfdVersion:
        description: >
          Identifies the version of the VNFD. The value is copied from the VNFD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Version"
      vnfPkgId:
        description: >
          Identifier of information held by the NFVO about
          the specific VNF package on which the VNF is
          based. This identifier has been allocated by the NFVO.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfConfigurableProperties:
        description: >
          Additional VNF-specific attributes that provide the current values
          of the configurable properties of the VNF instance.

          These attributes represent values that are stored persistently in the
          VnfInstance structure and that correspond to configuration parameters
          of the VNF instance.
          Modifying these attributes affects the configuration of the VNF instance
          either directly(if the VNF instance is in INSTANTIATED state at the time
          of the modification) or as part of the subsequent VNF instantiation operation
          (if the VNF instance is in NOT_INSTANTIATED state at the time of the modification).

          Configurable properties referred in these attributes are declared in
          the VNFD.

          ETSI GS NFV-SOL 001 specifies the structure and format of the VNFD
          based on TOSCA specifications.
          VNF configurable properties are sometimes also referred to as
          configuration parameters applicable to a VNF. Some of these are set
          prior to instantiation and cannot be modified if the VNF is
          instantiated, some are set prior to instantiation (are part of
          initial configuration) and can be modified later, and others can be
          set only after instantiation. The applicability of certain
          configuration may depend on the VNF and the required operation of
          the VNF at a certain point in time.
          These configurable properties include the following standard
          attributes, which are declared in the VNFD if auto-scaling and/or
          auto-healing are supported by the VNF: 
            - isAutoscaleEnabled: If present, the VNF supports auto-scaling. If
              set to true, auto-scaling is currently enabled. If set to false,
              auto-scaling is currently disabled.
            - isAutohealEnabled: If present, the VNF supports auto-healing. If
              set to true, auto-healing is currently enabled. If set to false,
              auto-healing is currently disabled.

          Modifications to this attribute can be requested using the "ModifyVnfInfoData" structure.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
      vimId:
        description: >
          Identifier of a VIM that manages resources for the VNF instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      instantiationState:
        description: >
          The instantiation state of the VNF.
        type: string
        enum:
          - NOT_INSTANTIATED
          - INSTANTIATED
      instantiatedVnfInfo:
        description: >
          Information specific to an instantiated VNF instance. This attribute
          shall be present if the instantiateState attribute value is INSTANTIATED.
        type: object
        required:
          - flavourId
          - vnfState
          - extCpInfo
        properties:
          flavourId:
            description: >
              Identifier of the VNF deployment flavor applied to this VNF instance.
            $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
          vnfState:
            description: >
              The state of the VNF instance.
            $ref: "#/definitions/VnfOperationalStateType"
          scaleStatus:
            description: >
              Scale status of the VNF, one entry per aspect. Represents for every
              scaling aspect how "big" the VNF has been scaled w.r.t. that aspect.
            type: array
            items:
              $ref: "#/definitions/VnfScaleInfo"
          maxScaleLevels:
            description: >
              Maximum allowed scale levels of the VNF, one
              entry per aspect.
              This attribute shall be present if the VNF
              supports scaling.
            type: array
            items:
              $ref: "#/definitions/VnfScaleInfo"
          extCpInfo:
            description: >
              Information about the external CPs exposed by the VNF instance.
              When trunking is enabled, the list of entries includes both,
              external CPs corresponding to parent ports of a trunk, and external
              CPs associated to sub-ports of a trunk.
            type: array
            minItems: 1
            items:
              $ref: "#/definitions/VnfExtCpInfo"
          extVirtualLinkInfo:
            description: >
              Information about the external VLs the VNF instance is connected to.
            type: array
            items:
              $ref: "#/definitions/ExtVirtualLinkInfo"
          extManagedVirtualLinkInfo:
            description: >
              External virtual links the VNF instance is connected to.
              It is possible to have several ExtManagedVirtualLinkInfo for the same VNF internal VL in case of a multi-site
              VNF spanning several VIMs. The set of ExtManagedVirtualLinkInfo corresponding to the same VNF internal VL
              shall indicate so by referencing to the same VnfVirtualLinkDesc and externally-managed multi-site VL instance
              (refer to clause 6.5.3.59).
            type: array
            items:
              $ref: "#/definitions/ExtManagedVirtualLinkInfo"
          monitoringParameters:
            description: >
              Performance metrics tracked by the VNFM (e.g. for 
              auto-scaling purposes) as identified by the VNF 
              provider in the VNFD.
            type: array
            items:
              $ref: "#/definitions/VnfMonitoringParameter"
          localizationLanguage:
            description: >
              Information about localization language of the VNF (includes e.g.
              strings in the VNFD). The localization languages supported by a VNF
              can be declared in the VNFD, and localization language selection can
              take place at instantiation time.
              The value shall comply with the format defined in IETF RFC 5646.
            type: string
          vnfcResourceInfo:
            description: >
              Information about the virtualised compute and storage resources used
              by the VNFCs of the VNF instance.
            type: array
            items:
              $ref: "#/definitions/VnfcResourceInfo"
          virtualLinkResourceInfo:
            description: >
              Information about the virtualised network resources used by the VLs
              of the VNF instance.
            type: array
            items:
              $ref: "#/definitions/VnfVirtualLinkResourceInfo"
          virtualStorageResourceInfo:
            description: >
              Information on the virtualised storage resource(s) used as storage for the VNF instance.
            type: array
            items:
              $ref: "#/definitions/VirtualStorageResourceInfo"
      metadata:
        description: >
          Additional VNF-specific attributes that provide
          metadata describing the VNF instance.
          These attributes represent values that are
          stored persistently in the VnfInstance structure
          for consumption by functional blocks that
          invoke the VNF lifecycle management
          interface. They are not consumed by the
          VNFM, or the lifecycle management scripts.
          Modifying the values of these attributes has no
          effect on the VNF instance, it only affects the
          information represented in the VnfInstance
          structure.
          Metadata that the VNF provider foresees are expected to be declared in the VNFD.
          Modifications to these attributes can be requested using the "ModifyVnfInfoData" structure.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
      extensions:
        description: >
          Additional VNF-specific attributes that affect the lifecycle management of this VNF instance.
          These attributes represent values that are stored persistently in the VnfInstance structure
          for consumption by the VNFM, or by the lifecycle management scripts.  during the execution
          of VNF lifecycle management operations.
          Modifying the values of these attributes has no direct effect on the VNF instance; however,
          the modified attribute values can be considered during subsequent VNF lifecycle management
          operations, which means that the modified values can indirectly affect the configuration of the VNF instance.
          Extensions that are allowed for the VNF are declared in the VNFD.
          Modifications to these attributes can be requested using the "ModifyVnfInfoData" structure.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"

  LccnLinks:
    type: object
    required:
      - nsInstance
    properties:
      nsInstance:
        description: >
          Link to the resource representing the NS instance to
          which the notified change applies..
        $ref: "../../definitions/SOL005_def.yaml#/definitions/NotificationLink"
      subscription:
        description: >
          Link to the subscription that triggered this notification.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/NotificationLink"
      nslcmOpOcc:
        description: >
          Link to the lifecycle operation occurrence that this
          notification is related to. Shall be present if there is a
          related lifecycle operation occurrence
        $ref: "../../definitions/SOL005_def.yaml#/definitions/NotificationLink"

  VnfOperationalStateType:
    type: string
    enum:
      - STARTED
      - STOPPED

  VnfScaleInfo:
    required:
      - aspectId
      - scaleLevel
    type: object
    properties:
      aspectId:
        description: >
          Identifier of the scaling aspect.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a "Change
          current VNF package" operation or due to its final failure).
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      scaleLevel:
        description: >
          Indicates the scale level. The minimum value shall be 0 and the
          maximum value shall be <= maxScaleLevel as described in the VNFD.
        type: integer

  PnfInfo:
    description: >
      This type represents the information about a PNF that is part of an NS instance. 
      It shall comply with the provisions
      defined in Table 6.5.3.13-1.
    type: object
    required:
      - pnfId
      - pnfdId
      - pnfdInfoId
      - pnfProfileId
    properties:
      pnfId:
        description: >
          Identifier of the PNF. This identifier is allocated by the OSS/BSS.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      pnfName:
        description: >
          Name of the PNF.
        type: string
      pnfdId:
        description: >
          Identifier of the PNFD on which the PNF is based.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      pnfdInfoId:
        description: >
          Identifier of the PNFD information onject related to this
          PNF. This identifier is allocated by the NFVO
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      pnfProfileId:
        description: >
          Identifier of the related PnfProfile in the NSD on which
          the PNF is based.
        $ref: "#/definitions/IdentifierInNsd"
      cpInfo:
        description: >
          Information on the external CP of the PNF.
        $ref: "#/definitions/PnfExtCpInfo"

  PnfExtCpInfo:
    description: >
      This type represents the information about the external CP of the PNF. 
      It shall comply with the provisions defined in
      Table 6.5.3.17-1.
    type: object
    required:
      - cpInstanceId
      - cpdId
    properties:
      cpInstanceId:
        description: >
          Identifier of the CP in the scope of the PNF.
        $ref: "#/definitions/IdentifierInPnf"
      cpdId:
        description: >
          Identifier of (reference to) the Connection Point
          Descriptor (CPD) for this CP.
        $ref: "#/definitions/IdentifierInNsd"
      cpProtocolData:
        description: >
          Parameters for configuring the network protocols on the CP.
        type: array
        items:
          $ref: "#/definitions/CpProtocolData"

  NsVirtualLinkInfo:
    description: >
      This type specifies the information about an NS VL instance. 
      It shall comply with the provisions defined in
      Table 6.5.3.53-1
    type: object
    required:
      - id
      - nsVirtualLinkDescId
      - nsVirtualLinkProfileId
    properties:
      id:
        description: >
          Identifier of the VL instance.
        $ref: "#/definitions/IdentifierInNs"
      nsVirtualLinkDescId:
        description: >
          Identifier of the VLD in the NSD.
        $ref: "#/definitions/IdentifierInNsd"
      nsVirtualLinkProfileId:
        description: >
          Identifier of the VL profile in the NSD.
        $ref: "#/definitions/IdentifierInNsd"
      resourceHandle:
        description: >
          Identifier(s) of the virtualised network resource(s) and/or multi-site connectivity service(s)
          realizing the VL instance.
          As an NS can include NFs deployed in NFVI PoPs under the control of several different VIMs, therefore deploying
          an NS VL can involve several VIMs, each allocating different virtualised network resources, as well as WIMs
          handling the connectivity in between the NFVI-PoPs in the form of multi-site connectivity services. When this
          NsVirtualLink is provided as an ExtVirtualLink as input of a VNF LCM operation, the id of the ExtVirtualLink
          shall be the same as the corresponding NsVirtualLink.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      linkPort:
        description: >
          Link ports of the VL instance.
          Cardinality of zero indicates that no port has yet been
          created for the VL instance.
        type: array
        items:
          $ref: "#/definitions/NsLinkPortInfo"

  VnffgInfo:
    description: >
      Information on the VNFFG(s) of the NS instance.
    type: object
    required:
      - id
      - vnffgdId
      - vnfInstanceId
      - pnfInfoId
    properties:
      id:
        description: >
          Identifier of this VNFFG instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnffgdId:
        description: >
          Identifier of the VNFFGD in the NSD.
        $ref: "#/definitions/IdentifierInNsd"
      vnfInstanceId:
        description: >
          Identifier(s) of the constituent VNF instance(s) of this VNFFG instance.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      pnfdInfoId:
        description: >
          Identifier(s) of the constituent PNF instance(s) of this
          VNFFG instance.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsVirtualLinkInfoId:
        description: >
          Identifier(s) of the constituent VL instance(s) of this
          VNFFG instance.
        type: array
        items:
          $ref: "#/definitions/IdentifierInNs"
      nsCpHandle:
        description: >
          Identifiers of the CP instances attached to the
          constituent VNFs and PNFs or the SAP instances of the
          VNFFG. See note.
        type: array
        items:
          $ref: "#/definitions/NsCpHandle"

  NfpInfo:
    description: >
      This type represents an NFP instance. It shall comply with 
      the provisions defined in Table 6.5.3.66-1.
    type: object
    required:
      - id
      - nfpRule
      - nfpState
    properties:
      id:
        description: >
          Identifier of this NFP instance.
        $ref: "#/definitions/IdentifierInNs"
      nfpdId:
        description: >
          Identifier of the NFPD used to instantiate this NFP
          instance. It shall be present if the NFP instance is
          instantiated from the NFPD.
        $ref: "#/definitions/IdentifierInNsd"
      nfpName:
        description: >
          Human readable name for the NFP instance.
        type: string
      description:
        description: >
          Human readable description for the NFP instance.
        type: string
      cpGroup:
        description: >
          Group(s) of CPs and/or SAPs which the NFP passes through.
          When multiple identifiers are included, the position of 
          the identifier in the CpGroup data type specifies the 
          position of the group in the path.
        type: array
        minItems: 1
        items:
          $ref: "#/definitions/NsCpHandle"
      totalCp:
        description: >
          Total number of CP and SAP instances in this NFP instance.
        type: integer
      nfpRule:
        description: >
          NFP classification and selection rule.
        $ref: "#/definitions/NfpRule"
      nfpState:
        description: >
          The state of the NFP instance.
          Permitted values:
          * ENABLED: The NFP instance is enabled.
          * DISABLED: The NFP instance is disabled.
        type: string
        enum:
          - ENABLED
          - DISABLED

  NsCpHandle:
    description: >
      This type represents an identifier of the CP or SAP instance. 
      It shall comply with the provisions defined in
      Table 6.5.3.56-1.
    type: object
    oneOf:
      - required:
          - vnfInstanceId
          - vnfExtCpInstanceId
      - required:
          - pnfInfoId
          - pnfExtCpInstanceId
      - required:
          - nsInstanceId
          - nsSapInstanceId
    properties:
      vnfInstanceId:
        description: >
          Identifier of the VNF instance associated to the CP instance.
          This attribute shall be present if the CP instance is VNF external CP.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfExtCpInstanceId:
        description: >
          Identifier of the VNF external CP instance in the scope
          of the VNF instance. This attribute shall be present if the CP instance is VNF
          external CP. See notes 1 and 4.
        $ref: "#/definitions/IdentifierInVnf"
      pnfInfoId:
        description: >
          Identifier of the PNF instance associated to the CP
          instance. This attribute shall be present if the CP instance is PNF
          external CP. See notes 2 and 4.          
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      pnfExtCpInstanceId:
        description: >
          Identifier of the PNF external CP instance in the scope
          of the PNF. This attribute shall be present if the CP instance is PNF
          external CP. See notes 2 and 4.
        $ref: "#/definitions/IdentifierInPnf"
      nsInstanceId:
        description: >
          Identifier of the NS instance associated to the SAP
          instance. This attribute shall be present if the CP instance is NS
          SAP. See notes 3 and 4.           
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsSapInstanceId:
        description: >
          Identifier of the SAP instance in the scope of the NS
          instance. This attribute shall be present if the CP instance is NS
          SAP. See notes 3 and 4.           
        $ref: "#/definitions/IdentifierInNs"

  SapInfo:
    description: >
      This type represents an SAP instance. It shall comply with the provisions defined in Table 6.5.3.67-1.
    type: object
    required:
      - id
      - sapdId
      - sapName
      - sapProtocolInfo
    properties:
      id:
        description: >
          Identifier of the SAP instance.
        $ref: "#/definitions/IdentifierInNs"
      sapdId:
        description: >
          Identifier of the SAPD in the NSD.
        $ref: "#/definitions/IdentifierInNsd"
      sapName:
        description: >
          Human readable name for the SAP instance.
        type: string
      description:
        description: >
          Human readable description for the SAP instance.
        type: string
      sapProtocolInfo:
        description: >
          Network protocol information for this SAP.
        type: array
        items:
          $ref: "#/definitions/CpProtocolInfo"

  NsMonitoringParameter:
    description: >
      This type represents a monitoring parameter that is tracked by the NFVO, for example, 
      for auto-scaling purposes. It shall comply with the provisions defined in Table 6.5.3.68-1.
    type: object
    required:
      - id
      - performanceMetric
    properties:
      id:
        description: >
          Identifier of the monitoring parameter defined in the NSD.
        $ref: "#/definitions/IdentifierInNsd"
      name:
        description: >
          Human readable name of the monitoring parameter, as defined in the NSD.
        type: string
      performanceMetric:
        description: >
          Performance metric that is monitored. This attribute shall contain the related 
          "Measurement Name" value as defined in clause 7.2 of ETSI GS NFV-IFA 027.
        type: string

  VnfMonitoringParameter:
    description: >
      This type represents a monitoring parameter that is tracked by the VNFM, for example, 
      for auto-scaling purposes. It shall comply with the provisions defined in Table 6.5.3.69-1.
    type: object
    required:
      - id
      - performanceMetric
    properties:
      id:
        description: >
          Identifier of the monitoring parameter defined in the VNFD.
        $ref: "#/definitions/IdentifierInNsd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a
          "Change current VNF package" operation or due to its final failure).
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      name:
        description: >
          Human readable name of the monitoring parameter, as defined in the VNFD.
        type: string
      performanceMetric:
        description: >
          Performance metric that is monitored. This attribute shall contain the related 
          "Measurement Name" value as defined in clause 7.2 of ETSI GS NFV-IFA 027.
        type: string

  VnfExtCpInfo:
    description: >
      This type represents information about an external CP of a VNF. It shall comply 
      with the provisions defined in Table 6.5.3.70-1.
    type: object
    required:
      - id
      - cpdId
    oneOf:
      - required:
        - associatedVnfcCpId
      - required:
        - associatedVnfVirtualLinkId
    properties:
      id:
        description: >
          Identifier of the external CP instance and the related information instance.
        $ref: "#/definitions/IdentifierInVnf"
      cpdId:
        description: >
          Identifier of the external CPD, VnfExtCpd, in the VNFD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      cpConfigId:
        description: >
          Identifier that references the applied "VnfExtCpConfig" entry in the "cpConfig"
          map of the "currentVnfExtCpData" in the "ExtVirtualLinkInfo" structure.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case the value differs from the vnfdId attribute of the
          VnfInstance (e.g. during a "Change current VNF package" operation or due to
          its final failure).
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      cpProtocolInfo:
        description: >
          Network protocol information for this CP.
        type: array
        minItems: 1
        items:
          $ref: "#/definitions/CpProtocolInfo"
      extLinkPortId:
        description: >
          Identifier of the "extLinkPortInfo" structure inside the "extVirtualLinkInfo" 
          structure. Shall be present if the CP is associated to a link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      metadata:
        description: >
          Metadata about this external CP.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
      associatedVnfcCpId:
        description: >
          Identifier of the "vnfcCpInfo" structure in "VnfcResourceInfo" structure 
          that represents the VNFC CP which is exposed by this external CP instance. 
          Shall be present in case this CP instance maps to a VNFC CP(s).
          The attributes "associatedVnfcCpId" and "associatedVnfVirtualLinkId" are 
          mutually exclusive. One and only one shall be present.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      associatedVnfVirtualLinkId:
        description: >
          Identifier of the "VnfVirtualLinkResourceInfo" structure that represents 
          the internal VL, which is exposed by this external CP instance. Shall be 
          present in case this CP instance maps to an internal VL.
          The attributes "associatedVnfcCpId" and "associatedVnfVirtualLinkId" are 
          mutually exclusive. One and only one shall be present.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"

  CpGroupInfo:
    description: >
      This type represents describes a group of CPs and/or SAPs pairs associated to 
      the same position in an NFP. It shall comply with the provisions defined in 
      Table 6.5.3.71-1.
    type: object
    properties:
      cpPairInfo:
        description: >
          One or more pair(s) of ingress and egress CPs or SAPs which the NFP passes by.
          All CP or SAP pairs in a group shall be instantiated from connection point 
          descriptors or service access point descriptors referenced in the corresponding 
          NfpPositionDesc.
        type: array
        minItems: 1
        items:
          $ref: "#/definitions/CpPairInfo"
      forwardingBehaviour:
        description: >
          Identifies a rule to apply to forward traffic to the ingress CPs or SAPs of 
          the group.
          Permitted values:
          * ALL = Traffic flows shall be forwarded simultaneously to all CPs or SAPs 
          of the group.
          * LB = Traffic flows shall be forwarded to one CP or SAP of the group selected 
          based on a loadbalancing algorithm.
        type: string
        enum:
          - ALL
          - LB
      forwardingBehaviourInputParameters:
        description: >
          Provides input parameters to configure the forwarding behaviour (e.g. identifies 
          a load balancing algorithm and criteria).
        $ref: "#/definitions/ForwardingBehaviourInputParameters"

  CpPairInfo:
    description: >
      This type represents describes a pair of ingress and egress CPs or SAPs which 
      the NFP passes by. It shall comply with the provisions defined in Table 6.5.3.72-1.
    type: object
    properties:
      vnfExtCpIds:
        description: >
          Identifier(s) of the VNF CP(s) which form the pair.
          The presence of a single vnfExpCpId, pnfExtCpId, or sapId occurrence indicates 
          that the CP or SAP is used both as an ingress and egress port at a particular 
          NFP position.
        type: array
        maxItems: 2
        items:
          $ref: "#/definitions/IdentifierInVnf"
      pnfExtCpIds:
        description: >
          Identifier(s) of the PNF CP(s) which form the pair.
          The presence of a single vnfExpCpId, pnfExtCpId, or sapId occurrence indicates 
          that the CP or SAP is used both as an ingress and egress port at a particular 
          NFP position.
        type: array
        maxItems: 2
        items:
          $ref: "#/definitions/IdentifierInPnf"
      sapIds:
        description: >
          Identifier(s) of the SAP(s) which form the pair.
          The presence of a single vnfExpCpId, pnfExtCpId, or sapId occurrence indicates 
          that the CP or SAP is used both as an ingress and egress port at a particular 
          NFP position.
        type: array
        maxItems: 2
        items:
          $ref: "#/definitions/IdentifierInNs"

  ForwardingBehaviourInputParameters:
    description: >
      This type represents provides input parameters to configure the forwarding behaviour. 
      It shall comply with the provisions defined in Table 6.5.3.73-1.
    type: object
    properties:
      algortihmName:
        description: >
          May be included if forwarding behaviour is equal to LB. Shall not be included otherwise.
          Permitted values:
          * ROUND_ROBIN
          * LEAST_CONNECTION
          * LEAST_TRAFFIC
          * LEAST_RESPONSE_TIME
          * CHAINED_FAILOVER
          * SOURCE_IP_HASH
          * SOURCE_MAC_HASH
        type: string
        enum:
          - ROUND_ROBIN
          - LEAST_CONNECTION
          - LEAST_TRAFFIC
          - LEAST_RESPONSE_TIME
          - CHAINED_FAILOVER
          - SOURCE_IP_HASH
          - SOURCE_MAC_HASH
      algorithmWeights:
        description: >
          Percentage of messages sent to a CP instance. May be included if applicable to 
          the algorithm.
          If applicable to the algorithm but not provided, default values determined by 
          the VIM or NFVI are expected to be used.
          Weight applies to the CP instances in the order they have been created.
        type: array
        items:
          type: integer

  CpProtocolInfo:
    description: >
      This type describes the protocol layer(s) that a CP or SAP uses together with protocol-related information, like
      addresses. It shall comply with the provisions defined in Table 6.5.3.58-1.
    type: object
    required:
      - layerProtocol
      - ipOverEthernet
    properties:
      layerProtocol:
        description: >
          The identifier of layer(s) and protocol(s)
          associated to the network address information.
          Permitted values: IP_OVER_ETHERNET See note.
        type: string
        enum:
          - IP_OVER_ETHERNET
      ipOverEthernet:
        description: >
          IP addresses over Ethernet to assign to the CP
          or SAP instance. Shall be present if
          layerProtocol is equal to "
          IP_OVER_ETHERNET", and shall be absent otherwise.
        $ref: "#/definitions/IpOverEthernetAddressInfo"

  IpOverEthernetAddressInfo:
    description: >
      This type represents information about a network address that has been assigned.
      It shall comply with the provisions defined in Table 6.5.3.18-1.
    type: object
    anyOf:
      - required:
        - macAddress
      - required:
        - ipAddresses
    properties:
      macAddress:
        description: >
          Assigned MAC address.
        $ref: "#/definitions/MacAddress"
      segmentationId:
        description: >
          Identification of the network segment to which the Cp instance connects to.
          If the Cp instance represents a subport in a trunk, "segmentationId" shall be present.
          Otherwise it shall not be present.
          Depending on the NFVI networking infrastructure, the "segmentationId" may indicate the actual network segment
          value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an
          identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface
          of the trunk port in question. In the latter case the NFVI infrastructure will map this local "segmentationId"
          to whatever "segmentationId" is actually used by the NFVI’s transport technology.
        type: string
      ipAddresses:
        description: >
          Addresses assigned to the CP instance. Each entry represents IP
          addresses assigned by fixed or dynamic IP address assignment per
          subnet.
        type: array
        items:
          type: object
          required:
            - type
          oneOf:
            - required:
                - addresses
            - required:
                - addressRange
          properties:
            type:
              description: >
                The type of the IP addresses.
                Permitted values: IPV4, IPV6.
              type: string
              enum:
                - IPV4
                - IPV6
            addresses:
              description: >
                Fixed addresses assigned (from the subnet defined by
                "subnetId" if provided).
              type: array
              items:
                $ref: "#/definitions/IpAddress"
            isDynamic:
              description: >
                Indicates whether this set of addresses was assigned
                dynamically (true) or based on address information provided as
                input from the API consumer (false). Shall be present if
                "addresses" is present and shall be absent otherwise.
              type: boolean
            addressRange:
              description: >
                An IP address range used, e.g., in case of egress connections.
                Exactly one of "addresses" or "addressRange" shall be present.
              type: object
              required:
                - minAddress
                - maxAddress
              properties:
                minAddress:
                  description: >
                    Lowest IP address belonging to the range.
                  $ref: "#/definitions/IpAddress"
                maxAddress:
                  description: >
                    Highest IP address belonging to the range
                  $ref: "#/definitions/IpAddress"
            subnetId:
              description: >
                Subnet defined by the identifier of the subnet resource in
                the VIM.
                In case this attribute is present, IP addresses are bound
                to that subnet.
              $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"


      type:
        description: >
          The type of the IP addresses
        type: string
        enum:
          - PV4
          - PV6
      addresses:
        description: >
          Fixed addresses assigned (from the subnet
          defined by "subnetId" if provided). See note.
        type: array
        items:
        $ref: "#/definitions/IpAddress"
      isDynamic:
        description: >
          Indicates whether this set of addresses was
          assigned dynamically (true) or based on address
          information provided as input from the API
          consumer (false). Shall be present if "addresses"
          is present and shall be absent otherwise.
        type: boolean
      addressRange:
        description: >
          An IP address range used, e.g. in case of egress
          connections. See note.
        type: object
        required:
          - minAddress
          - maxAddress
        properties:
          minAddress:
            description: >
              Lowest IP address belonging to the range.
            $ref: "#/definitions/IpAddress"
          maxAddress:
            description: >
              Highest IP address belonging to the range
            $ref: "#/definitions/IpAddress"
      minAddress:
        description: >
          Lowest IP address belonging to the range
        $ref: "#/definitions/IpAddress"
      maxAddress:
        description: >
          Highest IP address belonging to the range.
        $ref: "#/definitions/IpAddress"
      subnetId:
        description: >
          Subnet defined by the identifier of the subnet
          resource in the VIM.
          In case this attribute is present, IP addresses
          are bound to that subnet.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"

  ExtVirtualLinkInfo:
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of the external VL and the related external VL
          information instance.
          The identifier is assigned by the NFV-MANO entity that manages this
          VL instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceHandle:
        description: >
          Reference to the resource realizing this VL.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      extLinkPorts:
        description: >
          Link ports of this VL.
        type: array
        items:
          $ref: "#/definitions/ExtLinkPortInfo"
      currentVnfExtCpData:
        description: >
          Allows the API consumer to read the current CP configuration information
          for the connection of external CPs to the external virtual link, as
          specified in clause 5.5.3.2 of ETSI GS NFV-SOL 003.
        $ref: "#/definitions/VnfExtCpData"

  ExtLinkPortInfo:
    description: >
      This type represents information about a link port of an external VL,
      i.e. a port providing connectivity for the VNF to an NS VL. 
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of this link port as provided by the entity that has
          created the link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceHandle:
        description: >
          Reference to the virtualised resource realizing this link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      cpInstanceId:
        description: >
          Identifier of the external CP of the VNF connected to this link
          port. There shall be at most one link port associated with any
          external connection point instance. The value refers to an
          "extCpInfo" item in the VnfInstance.
        $ref: "#/definitions/IdentifierInVnf"

  ExtManagedVirtualLinkInfo:
    type: object
    required:
      - id
      - vnfVirtualLinkDescId
    properties:
      id:
        description: >
          Identifier of the externally-managed internal VL and the related
          externally-managed VL information instance.
          The identifier is assigned by the NFV-MANO entity that manages this
          VL instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfdId:
        description: >
          Identifier of the VNFD.
          Shall be present in case the value differs from the vnfdId attribute of the VnfInstance (e.g. during a
          "Change current VNF package" operation or due to its final failure).
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfVirtualLinkDescId:
        description: >
          Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      networkResource:
        description: >
          Reference to the VirtualNetwork resource or multi-site connectivity service providing this VL.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      vnfLinkPorts:
        description: >
          Link ports of this VL.
        type: array
        items:
          $ref: "#/definitions/VnfLinkPortInfo"
      extManagedMultisiteVirtualLinkId:
        description: >
          Identifier of the externally-managed multi-site VL instance. The identifier is assigned by the NFV-MANO entity
          that manages the externally managed multi-site VL instance. It shall be present when the present externally-managed
          internal VL is part of a multi-site VL, e.g., in support of multi-site VNF spanning several VIMs.
          All externally-managed internal VL instances corresponding to an internal VL created based on the same virtualLinkDescId
          shall refer to the same extManagedMultisiteVirtualLinkId.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"

  VnfLinkPortInfo:
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of this link port as provided by the entity that has created the link port.
        $ref: "#/definitions/IdentifierInVnf"
      resourceHandle:
        description: >
          Reference to the virtualised resource realizing this link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      cpInstanceId:
        description: >
          When the link port is used for external connectivity by the VNF,
          this attribute represents the identifier of the external CP of the
          VNF to be connected to this link port.
          When the link port is used for internal connectivity in the VNF,
          this attribute represents the VNFC CP to be connected to this link
          port.
          Shall be present when the link port is used for external
          connectivity by the VNF.
          may be present if used to reference a VNFC CP instance.
          There shall be at most one link port associated with any external
          connection point instance or internal connection point
          (i.e. VNFC CP) instance.
          The value refers to an "extCpInfo" item in the VnfInstance or a
          "vnfcCpInfo" item of a "vnfcResouceInfo" item in the VnfInstance.
        $ref: "#/definitions/IdentifierInVnf"
      cpInstanceType:
        description: >
          Type of the CP instance that is identified by cpInstanceId.
          Shall be present if "cpInstanceId" is present, and shall be
          absent otherwise.
          Permitted values:
          * VNFC_CP: The link port is connected to a VNFC CP
          * EXT_CP: The link port is associated to an external CP.
        type: string
        enum:
          - VNFC_CP
          - EXT_CP

  MonitoringParameter:
    type: object
    required:
      - id
      - value
      - timeStamp
    properties:
      id:
        description: >
          Identifier of the monitoring parameter defined in the VNFD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      name:
        description: >
          Human readable name of the monitoring parameter, as defined in the VNFD.
        type: string
      value:
        description: >
          Value of the monitoring parameter known to the VNFM (e.g. obtained
          for auto-scaling purposes).