Skip to content
SOL005NSLifecycleManagement_def.yaml 156 KiB
Newer Older
          $ref: "#/definitions/IdentifierInVnf"
      pnfExtCpIds:
        description: >
          Identifier(s) of the PNF CP(s) which form the pair.
          The presence of a single vnfExpCpId, pnfExtCpId, or sapId occurrence indicates 
          that the CP or SAP is used both as an ingress and egress port at a particular 
          NFP position.
        type: array
        maxItems: 2
        items:
          $ref: "#/definitions/IdentifierInPnf"
      sapIds:
        description: >
          Identifier(s) of the SAP(s) which form the pair.
          The presence of a single vnfExpCpId, pnfExtCpId, or sapId occurrence indicates 
          that the CP or SAP is used both as an ingress and egress port at a particular 
          NFP position.
        type: array
        maxItems: 2
        items:
          $ref: "#/definitions/IdentifierInNs"
  ForwardingBehaviourInputParameters:
    description: >
      This type represents provides input parameters to configure the forwarding behaviour. 
      It shall comply with the provisions defined in Table 6.5.3.73-1.
    type: object
    properties:
      algortihmName:
        description: >
          May be included if forwarding behaviour is equal to LB. Shall not be included otherwise.
          Permitted values:
          * ROUND_ROBIN
          * LEAST_CONNECTION
          * LEAST_TRAFFIC
          * LEAST_RESPONSE_TIME
          * CHAINED_FAILOVER
          * SOURCE_IP_HASH
          * SOURCE_MAC_HASH
        type: string
        enum:
          - ROUND_ROBIN
          - LEAST_CONNECTION
          - LEAST_TRAFFIC
          - LEAST_RESPONSE_TIME
          - CHAINED_FAILOVER
          - SOURCE_IP_HASH
          - SOURCE_MAC_HASH
      algorithmWeights:
        description: >
          Percentage of messages sent to a CP instance. May be included if applicable to 
          the algorithm.
          If applicable to the algorithm but not provided, default values determined by 
          the VIM or NFVI are expected to be used.
          Weight applies to the CP instances in the order they have been created.
        type: array
        items:
          type: integer

  CpProtocolInfo:
    description: >
      This type describes the protocol layer(s) that a CP or SAP uses together with protocol-related information, like
      addresses. It shall comply with the provisions defined in Table 6.5.3.58-1.
    type: object
    required:
      - layerProtocol
      - ipOverEthernet
    properties:
      layerProtocol:
        description: >
          The identifier of layer(s) and protocol(s)
          associated to the network address information.
          Permitted values: IP_OVER_ETHERNET See note.
        type: string
        enum:
          - IP_OVER_ETHERNET
      ipOverEthernet:
        description: >
          IP addresses over Ethernet to assign to the CP
          or SAP instance. Shall be present if
          layerProtocol is equal to "
          IP_OVER_ETHERNET", and shall be absent otherwise.
        $ref: "#/definitions/IpOverEthernetAddressInfo"

  IpOverEthernetAddressInfo:
    description: >
      This type represents information about a network address that has been assigned.
      It shall comply with the provisions defined in Table 6.5.3.18-1.
    type: object
    required:
      - macAddress
      - ipAddresses
      - subnetId
      - addresses
      - addressRange
    properties:
      macAddress:
        description: >
          Assigned MAC address.
        $ref: "#/definitions/MacAddress"
      ipAddresses:
        description: >
          Addresses assigned to the CP instance. Each entry represents IP
          addresses assigned by fixed or dynamic IP address assignment per
          subnet.
        type: array
        items:
          type: object
          required:
            - type
          properties:
            type:
              description: >
                The type of the IP addresses.
                Permitted values: IPV4, IPV6.
              type: string
              enum:
                - IPV4
                - IPV6
            addresses:
              description: >
                Fixed addresses assigned (from the subnet defined by
                "subnetId" if provided).
              type: array
              items:
                $ref: "#/definitions/IpAddress"
            isDynamic:
              description: >
                Indicates whether this set of addresses was assigned
                dynamically (true) or based on address information provided as
                input from the API consumer (false). Shall be present if
                "addresses" is present and shall be absent otherwise.
              type: boolean
            addressRange:
              description: >
                An IP address range used, e.g., in case of egress connections.
                Exactly one of "addresses" or "addressRange" shall be present.
              type: object
              required:
                - minAddress
                - maxAddress
              properties:
                minAddress:
                  description: >
                    Lowest IP address belonging to the range.
                  $ref: "#/definitions/IpAddress"
                maxAddress:
                  description: >
                    Highest IP address belonging to the range
                  $ref: "#/definitions/IpAddress"
            subnetId:
              description: >
                Subnet defined by the identifier of the subnet resource in
                the VIM.
                In case this attribute is present, IP addresses are bound
                to that subnet.
              $ref: "#/definitions/IdentifierInVim"
      type:
        description: >
          The type of the IP addresses
        type: string
        enum:
          - PV4
          - PV6
      addresses:
        description: >
          Fixed addresses assigned (from the subnet
          defined by "subnetId" if provided). See note.
        type: array
        items:
        $ref: "#/definitions/IpAddress"
      isDynamic:
        description: >
          Indicates whether this set of addresses was
          assigned dynamically (true) or based on address
          information provided as input from the API
          consumer (false). Shall be present if "addresses"
          is present and shall be absent otherwise.
        type: boolean
      addressRange:
        description: >
          An IP address range used, e.g. in case of egress
          connections. See note.
        type: object
        required:
          - minAddress
          - maxAddress
        properties:
          minAddress:
            description: >
              Lowest IP address belonging to the range.
            $ref: "#/definitions/IpAddress"
          maxAddress:
            description: >
              Highest IP address belonging to the range
            $ref: "#/definitions/IpAddress"
      minAddress:
        description: >
          Lowest IP address belonging to the range
        $ref: "#/definitions/IpAddress"
      maxAddress:
        description: >
          Highest IP address belonging to the range.
        $ref: "#/definitions/IpAddress"
      subnetId:
        description: >
          Subnet defined by the identifier of the subnet
          resource in the VIM.
          In case this attribute is present, IP addresses
          are bound to that subnet.
        $ref: "#/definitions/IdentifierInVim"
  ExtVirtualLinkInfo:
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of the external VL and the related external VL
          information instance.
          The identifier is assigned by the NFV-MANO entity that manages this
          VL instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceHandle:
        description: >
          Reference to the resource realizing this VL.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      extLinkPorts:
        description: >
          Link ports of this VL.
        type: array
        items:
          $ref: "#/definitions/ExtLinkPortInfo"

  ExtLinkPortInfo:
    description: >
      This type represents information about a link port of an external VL,
      i.e. a port providing connectivity for the VNF to an NS VL. 
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of this link port as provided by the entity that has
          created the link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceHandle:
        description: >
          Reference to the virtualised resource realizing this link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      cpInstanceId:
        description: >
          Identifier of the external CP of the VNF connected to this link
          port. There shall be at most one link port associated with any
          external connection point instance. The value refers to an
          "extCpInfo" item in the VnfInstance.
        $ref: "#/definitions/IdentifierInVnf"

  ExtManagedVirtualLinkInfo:
    type: object
    required:
      - id
      - vnfVirtualLinkDescId
    properties:
      id:
        description: >
          Identifier of the externally-managed internal VL and the related
          externally-managed VL information instance.
          The identifier is assigned by the NFV-MANO entity that manages this
          VL instance.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfVirtualLinkDescId:
        description: >
          Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.
        $ref: "#/definitions/IdentifierInVnfd"
      networkResource:
        description: >
          Reference to the VirtualNetwork resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      vnfLinkPorts:
        description: >
          Link ports of this VL.
        type: array
        items:
          $ref: "#/definitions/VnfLinkPortInfo"

  VnfLinkPortInfo:
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of this link port as provided by the entity that has created the link port.
        $ref: "#/definitions/IdentifierInVnf"
      resourceHandle:
        description: >
          Reference to the virtualised network resource realizing this link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      cpInstanceId:
        description: >
          When the link port is used for external connectivity by the VNF,
          this attribute represents the identifier of the external CP of the
          VNF to be connected to this link port.
          When the link port is used for internal connectivity in the VNF,
          this attribute represents the VNFC CP to be connected to this link
          port.
          Shall be present when the link port is used for external
          connectivity by the VNF.
          may be present if used to reference a VNFC CP instance.
          There shall be at most one link port associated with any external
          connection point instance or internal connection point
          (i.e. VNFC CP) instance.
          The value refers to an "extCpInfo" item in the VnfInstance or a
          "vnfcCpInfo" item of a "vnfcResouceInfo" item in the VnfInstance.
        $ref: "#/definitions/IdentifierInVnf"
      cpInstanceType:
        description: >
          Type of the CP instance that is identified by cpInstanceId.
          Shall be present if "cpInstanceId" is present, and shall be
          absent otherwise.
          Permitted values:
          * VNFC_CP: The link port is connected to a VNFC CP
          * EXT_CP: The link port is associated to an external CP.
        type: string
        enum:
          - VNFC_CP
          - EXT_CP

  MonitoringParameter:
    type: object
    required:
      - id
      - value
      - timeStamp
    properties:
      id:
        description: >
          Identifier of the monitoring parameter defined in the VNFD.
        $ref: "#/definitions/IdentifierInVnfd"
      name:
        description: >
          Human readable name of the monitoring parameter, as defined in the VNFD.
        type: string
      value:
        description: >
          Value of the monitoring parameter known to the VNFM (e.g. obtained
          The type of the "value" attribute (i.e. scalar, structure (Object in
          JSON), or array (of scalars, arrays or structures/Objects)) is
          assumed to be defined in an external measurement specification.
        type: object
      timeStamp:
        description: >
          Represents the point in time when the measurement has been performed,
          as known to the VNFM.
          Should be formatted according to ETF RFC 3339.
        type: string

  VnfcResourceInfo:
    description: >
      This type represents the information on virtualised compute and storage
      resources used by a VNFC in a VNF instance.
    type: object
    required:
      - id
      - vduId
      - computeResource
    properties:
      id:
        description: >
          Identifier of this VnfcResourceInfo instance.
        $ref: "#/definitions/IdentifierInVnf"
      vduId:
        description: >
          Reference to the applicable VDU in the VNFD.
        $ref: "#/definitions/IdentifierInVnfd"
      computeResource:
        description: >
          Reference to the VirtualCompute resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      storageResourceIds:
        description: >
          References to the VirtualStorage resources. The value refers to a
          VirtualStorageResourceInfo item in the VnfInstance.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      reservationId:
        description: >
          The reservation identifier applicable to the resource. It shall be
          present when an applicable reservation exists.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfcCpInfo:
        description: >
          CPs of the VNFC instance.
          Shall be present when that particular CP of the VNFC instance is
          associated to an external CP of the VNF instance.
          May be present otherwise.
        type: array
        items:
          type: object
          required:
            - id
            - cpdId
          properties:
            id:
              description: >
                Identifier of this VNFC CP instance and the associated array
                entry.
              $ref: "#/definitions/IdentifierInVnf"
            cpdId:
              description: >
                Identifier of the VDU CPD, cpdId, in the VNFD.
              $ref: "#/definitions/IdentifierInVnfd"
            vnfExtCpId:
              description: >
                When the VNFC CP is exposed as external CP of the VNF, the
                identifier of this external VNF CP.
              $ref: "#/definitions/IdentifierInVnf"
            cpProtocolInfo:
              description: >
                Network protocol information for this CP.
              type: array
              items:
                $ref: "#/definitions/CpProtocolInfo"
            vnfLinkPortId:
              description: >
                Identifier of the "vnfLinkPorts" structure in the
                "VnfVirtualLinkResourceInfo" structure. Shall be present if
                the CP is associated to a link port.
              $ref: "#/definitions/IdentifierInVnf"
            metadata:
              description: >
                Metadata about this CP.
              $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
      metadata:
        description: >
          Metadata about this resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"

  VnfVirtualLinkResourceInfo:
    description: >
      This type represents the information that allows addressing a virtualised
      resource that is used by an internal VL instance in a VNF instance.
    type: object
    required:
      - id
      - vnfVirtualLinkDescId
      - networkResource
    properties:
      id:
        description: >
          Identifier of this VnfVirtualLinkResourceInfo instance.
        $ref: "#/definitions/IdentifierInVnf"
      vnfVirtualLinkDescId:
        description: >
          Identifier of the VNF Virtual Link Descriptor (VLD) in the VNFD.
        $ref: "#/definitions/IdentifierInVnfd"
      networkResource:
        description: >
          Reference to the VirtualNetwork resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      reservationId:
        description: >
          The reservation identifier applicable to the resource. It shall be
          present when an applicable reservation exists.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfLinkPorts:
        description: >
          Links ports of this VL.
          Shall be present when the linkPort is used for external connectivity
          by the VNF (refer to VnfLinkPortInfo).
          May be present otherwise.
        type: array
        items:
          $ref: "#/definitions/VnfLinkPortInfo"
      metadata:
        description: >
          Metadata about this resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
  VirtualStorageResourceInfo:
    description: >
      This type represents the information that allows addressing a virtualised
      resource that is used by a VNF instance.
    type: object
    required:
      - id
      - virtualStorageDescId
      - storageResource
    properties:
      id:
        description: >
          Identifier of this VirtualStorageResourceInfo instance.
        $ref: "#/definitions/IdentifierInVnf"
      virtualStorageDescId:
        description: >
          Identifier of the VirtualStorageDesc in the VNFD.
        $ref: "#/definitions/IdentifierInVnfd"
      storageResource:
        description: >
          Reference to the VirtualStorage resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      reservationId:
        description: >
          The reservation identifier applicable to the resource. It shall be
          present when an applicable reservation exists.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      metadata:
        description: >
          Metadata about this resource.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
    description: >
      This type represents information about a link port of a VL instance.
      It shall comply with the provisions defined in Table 6.5.3.55-1.
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of this link port as provided by the entity that
          has created the link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceHandle:
        description: >
          Identifier of the virtualised network resource realizing
          this link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
      nsCpHandle:
        description: >
          Identifier of the CP/SAP instance to be connected to this
          link port. The value refers to a vnfExtCpInfo item in the
          VnfInstance, or a pnfExtCpInfo item in the PnfInfo, or a
          sapInfo item in the NS instance.
          There shall be at most one link port associated with any
          connection point instance.
        type: array
        items:
          $ref: "#/definitions/NsCpHandle"

  AffinityOrAntiAffinityRule:
    description: >
      This type describes the additional affinity or anti-affinity rule
      applicable between the VNF instances to be instantiated
      in the NS instantiation operation request or between the VNF instances
      to be instantiated in the NS instantiation
      operation request and the existing VNF instances..
    type: object
    required:
      - affinityOrAntiAffiinty
      - scope
    properties:
      vnfdId:
        description: >
          Reference to a VNFD.
          When the VNFD which is not used to instantiate VNF, it
          presents all VNF instances of this type as the subjects
          of the affinity or anti-affinity rule. The VNF instance
          which the VNFD presents is not necessary as a part of
          the NS to be instantiated.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfProfileId:
        description: >
          Reference to a vnfProfile defined in the NSD.
          At least one VnfProfile which is used to instantiate VNF
          for the NS to be instantiated as the subject of the affinity
          or anti-affinity rule shall be present. When the VnfProfile
          which is not used to instantiate VNF, it presents all VNF
          instances of this type as the subjects of the affinity or
          anti-affinity rule. The VNF instance which the VnfProfile
          presents is not necessary as a part of the NS to be instantiated.
        type: array
        items:
          $ref: "#/definitions/IdentifierInNsd"
      vnfInstanceId:
        description: >
          Reference to the existing VNF instance as the subject of
          the affinity or anti-affinity rule. The existing VNF instance
          is not necessary as a part of the NS to be instantiated.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      affinityOrAntiAffiinty:
        description: >
          The type of the constraint.
          Permitted values:
          AFFINITY
          ANTI_AFFINITY.
        type: string
        enum:
          - AFFINITY
          - ANTI_AFFINITY
      scope:
        description: >
          Specifies the scope of the rule where the placement
          constraint applies.
          Permitted values:
          NFVI_POP
          ZONE
          ZONE_GROUP
          NFVI_NODE.
        type: string
        enum:
          - NFVI_POP
          - ZONE
          - ZONE_GROUP
          - NFVI_NODE

  InstantiateNsRequest:
    type: object
    required:
    properties:
      nsFlavourId:
        description: >
          Identifier of the NS deployment flavor to be instantiated.
        $ref: "#/definitions/IdentifierInNsd"
      sapData:
        description: >
          Create data concerning the SAPs of this NS.
      addpnfData:
        description: >
          Information on the PNF(s) that are part of this NS.
        type: array
      vnfInstanceData:
        description: >
          Specify an existing VNF instance to be used in the NS.
          If needed, the VNF Profile to be used for this VNF
          instance is also provided.
          The DF of the VNF instance shall match the VNF DF 
          present in the associated VNF Profile.
          $ref: "#/definitions/VnfInstanceData"
        description: >
          Specify an existing NS instance to be used as a nested
          NS within the NS.
          If needed, the NS Profile to be used for this nested NS 
          instance is also provided.
          NOTE 2: The NS DF of each nested NS shall be one of the 
          allowed flavours in the associated NSD (as referenced in the
          nestedNsd attribute of the NSD of the NS to be instantiated).
          NOTE 3: The NSD of each referenced NSs (i.e. each 
          nestedInstanceId) shall match the one of the nested NSD in 
          the composite NSD.
          $ref: "#/definitions/NestedNsInstanceData"
      localizationLanguage:
        description: >
          Defines the location constraints for the VNF to be
          instantiated as part of the NS instantiation.
          An example can be a constraint for the VNF to be in a
          specific geographic location..
        type: array
        items:
          $ref: "#/definitions/VnfLocationConstraint"
      additionalParamsForNs:
        description: >
          Allows the OSS/BSS to provide additional parameter(s)
          at the composite NS level (as opposed to the VNF level, 
          which is covered in additionalParamsForVnf), and as 
          opposed to the nested NS level, which is covered in
          additionalParamForNestedNs.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
        description: >
          Allows the OSS/BSS to provide additional parameter(s)
          per nested NS instance (as opposed to the composite NS
          level, which is covered in additionalParamForNs, and as
          opposed to the VNF level, which is covered in
          additionalParamForVnf). This is for nested NS instances
          that are to be created by the NFVO as part of the NS
          instantiation and not for existing nested NS instances that
          are referenced for reuse.
        type: array
        items:
          $ref: "#/definitions/ParamsForNestedNs"
      additionalParamsForVnf:
        description: >
          Allows the OSS/BSS to provide additional parameter(s)
          per VNF instance (as opposed to the composite NS level, 
          which is covered in additionalParamsForNs and as opposed 
          to the nested NS level, which is covered in 
          additionalParamForNestedNs). This is for VNFs that are 
          to be created by the NFVO as part of the NS instantiation 
          and not for existing VNF that are referenced for reuse.
      startTime:
        description: >
          Timestamp indicating the earliest time to instantiate the NS. 
          Cardinality "0" indicates the NS instantiation takes place immediately.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"
      nsInstantiationLevelId:
        description: >
          Identifies one of the NS instantiation levels declared in
          the DF applicable to this NS instance. If not present, the
          default NS instantiation level as declared in the NSD
          shall be used.
        $ref: "#/definitions/IdentifierInNsd"
      additionalAffinityOrAntiAffinityRule:
          Specifies additional affinity or anti-affinity constraint for
          the VNF instances to be instantiated as part of the NS
          instantiation.
          Shall not conflict with rules already specified in the NSD.
          $ref: "#/definitions/AffinityOrAntiAffinityRule"

  ParamsForNestedNs:
    description: >
      This type specifies additional parameters on a per-nested NS instance basis. 
      It shall comply with the provisions defined in Table 6.5.3.21a-1.
    type: object
    required:
      - nsProfileId
    properties:
      nsProfileId:
        description: >
          Identifier of a NsProfile to which the additional parameters apply.
        $ref: "#/definitions/IdentifierInNsd"
      additionalParam:
        description: >
          Additional parameters that are to be applied on a per nested NS instance.
        type: array
        items:
          $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
    description: >
      This type defines the additional parameters for the VNF instance
      to be created associated with an NS instance.
      It shall comply with the provisions defined in Table 6.5.3.22-1.
    type: object
    required:
      - vnfProfileId
    properties:
      vnfProfileId:
        description: >
          Identifier of (reference to) a vnfProfile to which the
          additional parameters apply.
        $ref: "#/definitions/IdentifierInNsd"
      additionalParams:
        description: >
          Additional parameters that are applied for the VNF
          instance to be created.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
  LocationConstraints:
    description: >
      This type represents location constraints for a VNF to be instantiated.
      The location constraints shall be presented as a
      country code, optionally followed by a civic address based on
      the format defined by IETF RFC 4776 [13].
    type: object
    required:
      - countryCode
    properties:
      countryCode:
        description: >
          The two-letter ISO 3166 [29] country code in capital letters.
        type: string
      civicAddressElement:
        description: >
          Zero or more elements comprising the civic address.
        type: array
        items:
          type: object
          required:
            - caType
            - caValue
          properties:
            caType:
              description: >
                Describe the content type of caValue. The value of
                caType shall comply with Section 3.4 of IETF
                RFC 4776 [13].
              type: integer
            caValue:
              description: >
                Content of civic address element corresponding to the
                caType. The format caValue shall comply with
                Section 3.4 of IETF RFC 4776 [13].
              type: string

  VnfLocationConstraint:
    description: >
      This type represents the association of location constraints to a VNF instance
      to be created according to a specific VNF profile.
      It shall comply with the provisions defined in Table 6.5.3.20-1.
    type: object
    required:
      - vnfProfileId
    properties:
      vnfProfileId:
        description: >
          Identifier of (reference to) a vnfProfile to which the
          additional parameters apply.
        $ref: "#/definitions/IdentifierInNsd"
      locationConstraints:
        description: >
          Defines the location constraints for the VNF instance to
          be created based on the VNF profile.
        $ref: "#/definitions/LocationConstraints"
    description: >
      This type specifies an existing VNF instance to be used in the NS instance and
      if needed, the VNF Profile to use for this VNF instance.
      It shall comply with the provisions defined in Table 6.5.3.19-1.
    type: object
    required:
      - vnfInstanceId
      - vnfProfileId
    properties:
      vnfInstanceId:
        description: >
          Identifier of the existing VNF instance to be used in the NS.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vnfProfileId:
        description: >
          Identifier of (Reference to) a vnfProfile defined in the
          NSD which the existing VNF instance shall be matched
          with. If not present, the NFVO will select the VnfProfile
          matching the information in the VNF instance.
        $ref: "#/definitions/IdentifierInNsd"
  NestedNsInstanceData:
    description: >
      This type specifies an existing nested NS instance to be used in the NS instance 
      and if needed, the NsProfile to use for this nested NS instance. 
      It shall comply with the provisions defined in Table 6.5.3.19a-1.
    type: object
    required:
      - nestedNsInstanceId
    properties:
      nestedNsInstanceId:
        description: >
          Identifier of the existing nested NS instance to be used in the NS.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      nsProfileId:
        description: >
          Identifier of an NsProfile defined in the NSD which the existing 
          nested NS instance shall be matched with.
          If not present, the NFVO will select the NsProfile matching the 
          information in the nested NS instance.
        $ref: "#/definitions/IdentifierInNs"
    description: >
      This type represents the information related to a SAP of a NS.
      It shall comply with the provisions defined in Table 6.5.3.10-1.
    type: object
    required:
      - sapdId
      - sapName
      - description
    properties:
      sapdId:
        description: >
          Reference to the SAPD for this SAP.
        $ref: "#/definitions/IdentifierInNsd"
      sapName:
        description: >
          Human readable name for the SAP.
        type: string
      description:
        description: >
          Human readable description for the SAP.
        type: string
      sapProtocolData:
        description: >
          Parameters for configuring the network protocols on the SAP.
        type: array
          $ref: "#/definitions/CpProtocolData"
      This type represents a request for the scale NS operation.
    type: object
    required:
          Indicates the type of scaling to be performed.
          Possible values:
          - SCALE_NS
          - SCALE_VNF
        type: string
        enum:
          - SCALE_NS
          - SCALE_VNF
      scaleNsData:
        description: >
          The necessary information to scale the referenced NS instance.
          It shall be present when scaleType = SCALE_NS.
        $ref: "#/definitions/ScaleNsData"
      scaleVnfData:
        description: >
          The necessary information to scale the referenced NS instance.
          It shall be present when scaleType = SCALE_VNF.
        type: array
        items:
          $ref: "#/definitions/ScaleVnfData"
      scaleTime:
        description: >
          Timestamp indicating the scale time of the NS, i.e. the
          NS will be scaled at this timestamp. Cardinality "0"
          indicates the NS scaling takes place immediately".
        $ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"

  UpdateNsRequest:
    description: >
      This operation supports the update of a NS instance, 
      It shall comply with the provisions defined in Table 6.5.2.12-1.
    type: object
    required:
      - updateType
    properties:
      updateType:
        description: >
          The type of update. It determines also which one of the
          following parameters is present in the operation.
          Possible values include:
          * ADD_VNF: Adding existing VNF instance(s)
          * REMOVE_VNF: Removing VNF instance(s)
          * INSTANTIATE_VNF: Instantiating new VNF(s)
          * CHANGE_VNF_DF: Changing VNF DF
          * OPERATE_VNF: Changing VNF state,
          * MODIFY_VNF_INFORMATION: Modifying
          VNF information and/or the configurable
          properties of VNF instance(s)
          * CHANGE_EXTERNAL_VNF_CONNECTIVITY:
          Changing the external connectivity of VNF
          instance(s)ADD_SAP: Adding SAP(s)
          * REMOVE_SAP: Removing SAP(s)
          * ADD_NESTED_NS: Adding existing NS
          instance(s) as nested NS(s)
          * REMOVE_NESTED_NS: Removing existing
          nested NS instance(s)
          * ASSOC_NEW_NSD_VERSION: Associating a
          new NSD version to the NS instance
          * MOVE_VNF: Moving VNF instance(s) from one
          origin NS instance to another target NS
          instance
          * ADD_VNFFG: Adding VNFFG(s)
          * REMOVE_VNFFG: Removing VNFFG(s)
          * UPDATE_VNFFG: Updating VNFFG(s)
          * CHANGE_NS_DF: Changing NS DF
          * ADD_PNF: Adding PNF
          * MODIFY_PNF: Modifying PNF
          * REMOVE_PNF: Removing PNF
        type: string
          - ADD_VNF
          - REMOVE_VNF
          - INSTANTIATE_VNF
          - CHANGE_VNF_DF
          - OPERATE_VNF
          - MODIFY_VNF_INFORMATION
          - CHANGE_EXTERNAL_VNF_CONNECTIVITY
          - REMOVE_SAP
          - ADD_NESTED_NS
          - REMOVE_NESTED_NS
          - ASSOC_NEW_NSD_VERSION
          - MOVE_VNF
          - ADD_VNFFG
          - REMOVE_VNFFG
          - UPDATE_VNFFG
          - CHANGE_NS_DF
          - ADD_PNF
          - MODIFY_PNF
          - REMOVE_PNF
      addVnfIstance:
        description: >