Newer
Older
# Copyright (c) ETSI 2017.
# https://forge.etsi.org/etsi-forge-copyright-notice.txt
definitions:
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
AffectedVnfc:
description: >
This type provides information about added, deleted, modified and
temporary VNFCs.
type: object
required:
- id
- vduId
- changeType
- computeResource
properties:
id:
description: >
Identifier of the Vnfc instance, identifying the applicable
"vnfcResourceInfo" entry in the "VnfInstance" data type.
$ref: "#/definitions/IdentifierInVnf"
vduId:
description: >
Identifier of the related VDU in the VNFD.
$ref: "#/definitions/IdentifierInVnfd"
changeType:
description: >
Signals the type of change. Permitted values:
* ADDED
* REMOVED
* MODIFIED
* TEMPORARY
For a temporary resource, an AffectedVnfc structure exists as long
as the temporary resource exists.
type: string
enum:
- ADDED
- REMOVED
- MODIFIED
- TEMPORARY
computeResource:
description: >
Reference to the VirtualCompute resource. Detailed information is
(for new and modified resources) or has been (for removed
resources) available from the VIM.
$ref: "#/definitions/ResourceHandle"
metadata:
description: >
Metadata about this resource.
The content of this attribute shall be a copy of the content of the
"metadata" attribute of the VnfcResourceInfo structure.
$ref: "#/definitions/KeyValuePairs"
affectedVnfcCpIds:
description: >
Identifiers of CP(s) of the VNFC instance that were affected by the
change.
Shall be present for those affected CPs of the VNFC instance that
are associated to an external CP of the VNF instance.
May be present for further affected CPs of the VNFC instance.
type: array
$ref: "#/definitions/IdentifierInVnf"
addedStorageResourceIds:
description: >
References to VirtualStorage resources that have been added. Each
value refers to a VirtualStorageResourceInfo item in the
VnfInstance that was added to the VNFC. It shall be provided if at
least one storage resource was added to the VNFC.
type: array
$ref: "#/definitions/IdentifierInVnf"
removedStorageResourceIds:
description: >
References to VirtualStorage resources that have been removed.
The value contains the identifier of a VirtualStorageResourceInfo
item that has been removed from the VNFC, and might no longer exist
in the VnfInstance.
It shall be provided if at least one storage resource was removed
from the VNFC.
type: array
$ref: "#/definitions/IdentifierInVnf"
Link:
description: >
This type represents a link to a resource using an absolute URI.
It shall comply with the provisions defined in table 4.4.1.3-1.
type: object
required:
- href
properties:
href:
description: >
URI of another resource referenced from a resource.
Shall be an absolute URI (i.e. a URI that contains {apiRoot}).
$ref: "#/definitions/Uri"
NotificationLink:
description: >
This type represents a link to a resource in a notification,
using an absolute or relative URI. It shall comply with the
provisions defined in table 4.4.1.3a-1.
type: object
required:
- href
properties:
href:
description: >
URI of a resource referenced from a notification.
Should be an absolute URI (i.e. a URI that contains
{apiRoot}), however, may be a relative URI (i.e. a URI
where the {apiRoot} part is omitted) if the {apiRoot}
information is not available.
$ref: "#/definitions/Uri"
Version:
description: >
A version.
type: string
MacAddress:
description: >
A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons.
type: string
format: MAC
IpAddress:
description: >
An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal
integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that
consists of groups of zero to four hexadecimal digits, separated by colons.
type: string
format: IP
CpProtocolData:
description: >
This type represents network protocol data.
type: object
layerProtocol:
description: >
Identifier of layer(s) and protocol(s).
This attribute allows to signal the addition of further types of
layer and protocol in future versions of the present document in a
backwards-compatible way. In the current version of the present
document, only IP over Ethernet is supported.
type: string
- IP_OVER_ETHERNET
ipOverEthernet:
description: >
Network address data for IP over Ethernet to assign to the extCP
instance. Shall be present if layerProtocol is equal to
"IP_OVER_ETHERNET", and shall be absent otherwise.
$ref: "#/definitions/IpOverEthernetAddressData"
DateTime:
description: >
Date-time stamp.
Representation: String formatted according to IETF RFC 3339.
type: string
format: "date-time"
This type represents an externally provided link port to be used to
connect an external connection point to an external VL.
Identifier of this link port as provided by the entity that has
created the link port.
$ref: "#/definitions/Identifier"
resourceHandle:
Reference to the virtualised resource realizing this link port.
$ref: "#/definitions/ResourceHandle"
ExtManagedVirtualLinkData:
type: object
required:
- id
- virtualLinkDescId
- resourceId
properties:
id:
description: >
The identifier of the externally-managed internal VL instance. The
identifier is assigned by the NFV-MANO entity that manages this VL
instance.
$ref: "#/definitions/Identifier"
Francesca Moscatelli
committed
vnfVirtualLinkDescId:
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
description: >
The identifier of the VLD in the VNFD for this VL.
$ref: "#/definitions/IdentifierInVnfd"
vimConnectionId:
description: >
Identifier of the VIM connection to manage this resource. This
attribute shall only be supported and present if VNF-related
resource management in direct mode is applicable.
$ref: "#/definitions/Identifier"
resourceProviderId:
description: >
Identifies the entity responsible for the management of this
resource. This attribute shall only be supported and present if
VNF-related resource management in indirect mode is applicable. The
identification scheme is outside the scope of the present document.
$ref: "#/definitions/Identifier"
resourceId:
description: >
The identifier of the resource in the scope of the VIM or the
resource provider.
$ref: "#/definitions/IdentifierInVim"
ExtVirtualLinkData:
description: >
This type represents an external VL.
type: object
required:
- id
- resourceId
- extCps
The identifier of the external VL instance. The identifier is
assigned by the NFV-MANO entity that manages this VL instance.
$ref: "#/definitions/Identifier"
vimConnectionId:
description: >
Identifier of the VIM connection to manage this resource. This
attribute shall only be supported and present if VNF-related
resource management in direct mode is applicable.
$ref: "#/definitions/Identifier"
description: >
Identifies the entity responsible for the management of this
resource. This attribute shall only be supported and present
if VNF-related resource management in indirect mode is applicable.
The identification scheme is outside the scope of the present
document.
$ref: "#/definitions/Identifier"
description: >
The identifier of the resource in the scope of the VIM or the
resource provider.
$ref: "#/definitions/IdentifierInVim"
extCps:
description: >
External CPs of the VNF to be connected to this external VL.
type: array
$ref: "#/definitions/VnfExtCpData"
Externally provided link ports to be used to connect external
connection points to this external VL. If this attribute is not
present, the VNFM shall create the link ports on the external VL.
type: array
$ref: "#/definitions/ExtLinkPortData"
GrantedLcmOperationType:
description: >
The enumeration GrantedLcmOperationType defines the permitted values
to represent VNF lifecycle operation types in grant requests.
Value | Description
------|------------
INSTANTIATE | Represents the "Instantiate VNF" LCM operation.
SCALE | Represents the "Scale VNF" LCM operation.
SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation.
CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation.
TERMINATE | Represents the "Terminate VNF" LCM operation.
HEAL | Represents the "Heal VNF" LCM operation.
OPERATE | Represents the "Operate VNF" LCM operation.
CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation.
type: string
enum:
- INSTANTIATE
- SCALE
- SCALE_TO_LEVEL
- CHANGE_FLAVOUR
- TERMINATE
- HEAL
- OPERATE
- CHANGE_EXT_CONN
Identifier:
description: >
An identifier with the intention of being globally unique.
type: string
IdentifierInVim:
description: >
An identifier maintained by the VIM or other resource provider. It is
expected to be unique within the VIM instance.
type: string
IdentifierInVnf:
description: >
An identifier that is unique for the respective type within a VNF
instance, but may not be globally unique.
type: string
IdentifierInVnfd:
description: >
An identifier that is unique within a VNF descriptor.
type: string
IpOverEthernetAddressData:
description: >
This type represents network address data for IP over Ethernet.
type: object
properties:
description: >
MAC address. If this attribute is not present, it shall be chosen by
the VIM.
At least one of "macAddress" or "ipAddresses" shall be present.
$ref: "#/definitions/MacAddress"
ipAddresses:
description: >
List of IP addresses to assign to the CP instance. Each entry
represents IP address data for fixed or dynamic IP address
assignment per subnet.
If this attribute is not present, no IP address shall be assigned.
type: array
items:
type: object
type:
description: >
The type of the IP addresses.
Permitted values: IPV4, IPV6.
type: string
enum:
- IPV4
- IPV6
fixedAddresses:
description: >
Fixed addresses to assign (from the subnet defined by
"subnetId" if provided).
Exactly one of "fixedAddresses", "numDynamicAddresses" or
"ipAddressRange" shall be present.
type: array
$ref: "#/definitions/IpAddress"
numDynamicAddresses:
description: >
Number of dynamic addresses to assign (from the subnet defined
by "subnetId" if provided).
Exactly one of "fixedAddresses", "numDynamicAddresses" or
"ipAddressRange" shall be present.
type: integer
addressRange:
description: >
An IP address range to be used, e.g. in case of egress
connections.
In case this attribute is present, IP addresses from the range
will be used.
type: object
required:
- minAddress
- maxAddress
minAddress:
description: >
Lowest IP address belonging to the range.
$ref: "#/definitions/IpAddress"
maxAddress:
description: >
Highest IP address belonging to the range.
$ref: "#/definitions/IpAddress"
subnetId:
description: >
Subnet defined by the identifier of the subnet resource in the
VIM.
In case this attribute is present, IP addresses from that
subnet will be assigned; otherwise, IP addresses not bound to
a subnet will be assigned.
$ref: "#/definitions/IdentifierInVim"
KeyValuePairs:
description: >
This type represents a list of key-value pairs. The order of the pairs in the list is not significant.
In JSON, a set of key- value pairs is represented as an object. It shall comply with the provisions
defined in clause 4 of IETF RFC 7159.
LcmOperationType:
description: >
Value | Description
------|------------
INSTANTIATE | Represents the "Instantiate VNF" LCM operation.
SCALE | Represents the "Scale VNF" LCM operation.
SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation.
CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation.
TERMINATE | Represents the "Terminate VNF" LCM operation.
HEAL | Represents the "Heal VNF" LCM operation.
OPERATE | Represents the "Operate VNF" LCM operation.
CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation.
MODIFY_INFO | Represents the "Modify VNF Information" LCM operation.
type: string
enum:
- INSTANTIATE
- SCALE
- SCALE_TO_LEVEL
- CHANGE_FLAVOUR
- TERMINATE
- HEAL
- OPERATE
- CHANGE_EXT_CONN
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
ProblemDetails:
#SOL003 location: 4.3.5.3
description: >
The definition of the general "ProblemDetails" data structure from
IETF RFC 7807 [19] is reproduced inthis structure. Compared to the
general framework defined in IETF RFC 7807 [19], the "status" and
"detail" attributes are mandated to be included by the present document,
to ensure that the response contains additional textual information about
an error. IETF RFC 7807 [19] foresees extensibility of the
"ProblemDetails" type. It is possible that particular APIs in the present
document, or particular implementations, define extensions to define
additional attributes that provide more information about the error.
The description column only provides some explanation of the meaning to
Facilitate understanding of the design. For a full description, see
IETF RFC 7807 [19].
type: object
required:
- status
- detail
properties:
type:
description: >
A URI reference according to IETF RFC 3986 [5] that identifies the
problem type. It is encouraged that the URI provides human-readable
documentation for the problem (e.g. using HTML) when dereferenced.
When this member is not present, its value is assumed to be
"about:blank".
type: string
format: URI
title:
description: >
A short, human-readable summary of the problem type. It should not
change from occurrence to occurrence of the problem, except for
purposes of localization. If type is given and other than
"about:blank", this attribute shall also be provided.
A short, human-readable summary of the problem
type. It SHOULD NOT change from occurrence to occurrence of the
problem, except for purposes of localization (e.g., using
proactive content negotiation; see [RFC7231], Section 3.4).
type: string
status:
description: >
The HTTP status code for this occurrence of the problem.
The HTTP status code ([RFC7231], Section 6) generated by the origin
server for this occurrence of the problem.
type: integer
detail:
description: >
A human-readable explanation specific to this occurrence of the
problem.
type: string
instance:
description: >
A URI reference that identifies the specific occurrence of the
problem. It may yield further information if dereferenced.
type: string
format: URI
#TODO: How to express "any additional attributes"?
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
ResourceHandle:
required:
- vimConnectionId
- resourceId
type: object
description: >
This type represents the information that allows addressing a virtualised
resource that is used by a VNF instance. Information about the resource
is available from the VIM.
properties:
vimConnectionId:
description: >
Identifier of the VIM connection to manage the resource. This
attribute shall only be supported and present if VNF-related resource
management in direct mode is applicable. The applicable
"VimConnectionInfo" structure, which is referenced by
vimConnectionId, can be obtained from the "vimConnectionInfo"
attribute of the "VnfInstance" structure.
$ref: "#/definitions/Identifier"
resourceProviderId:
description: >
Identifier of the entity responsible for the management of the
resource. This attribute shall only be supported and present when
VNF-related resource management in indirect mode is applicable. The
identification scheme is outside the scope of the present document.
$ref: "#/definitions/Identifier"
resourceId:
description: >
Identifier of the resource in the scope of the VIM or the resource
provider.
$ref: "#/definitions/IdentifierInVim"
vimLevelResourceType:
description: >
Type of the resource in the scope of the VIM or the resource
provider.
type: string
#TODO: Note of Table 4.4.1.7-1
SubscriptionAuthentication:
type: object
Defines the types of Authentication / Authorization which the API
consumer is willing to accept when receiving a notification.
* BASIC: In every HTTP request to the notification endpoint, use
HTTP Basic authentication with the client credentials.
* OAUTH2_CLIENT_CREDENTIALS: In every HTTP request to the
notification endpoint, use an OAuth 2.0 Bearer token, obtained
using the client credentials grant type.
* TLS_CERT: Every HTTP request to the notification endpoint is sent
over a mutually authenticated TLS session, i.e. not only the
server is authenticated, but also the client is authenticated
during the TLS tunnel setup.
type: array
type: string
enum:
- BASIC
- OAUTH2_CLIENT_CREDENTIALS
- TLS_CERT
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
paramsBasic:
description: >
Parameters for authentication/authorization using BASIC.
Shall be present if authType is "BASIC" and the contained
information has not been provisioned out of band.
Shall be absent otherwise.
type: object
properties:
userName:
description: >
Username to be used in HTTP Basic authentication. Shall be
present if it has not been provisioned out of band.
type: string
password:
description: >
Password to be used in HTTP Basic authentication. Shall be
present if it has not been provisioned out of band.
type: string
paramsOauth2ClientCredentials:
description: >
Parameters for authentication/authorization using
OAUTH2_CLIENT_CREDENTIALS.
Shall be present if authType is "OAUTH2_CLIENT_CREDENTIALS" and the
contained information has not been provisioned out of band.
Shall be absent otherwise.
type: object
properties:
clientId:
description: >
Client identifier to be used in the access token request of the
OAuth 2.0 client credentials grant type.
Shall be present if it has not been provisioned out of band.
The clientId and clientPassword passed in a subscription shall
not be the same as the clientId and clientPassword that are used
to obtain authorization for API requests. Client credentials may
differ between subscriptions. The value of clientPassword should
be generated by a random process.
type: string
clientPassword:
description: >
Client password to be used in the access token request of the
OAuth 2.0 client credentials grant type.
Shall be present if it has not been provisioned out of band.
The clientId and clientPassword passed in a subscription shall
not be the same as the clientId and clientPassword that are used
to obtain authorization for API requests. Client credentials may
differ between subscriptions. The value of clientPassword should
be generated by a random process.
type: string
tokenEndpoint:
description: >
The token endpoint from which the access token can be obtained.
Shall be present if it has not been provisioned out of band.
$ref: "#/definitions/Uri"
Uri:
description: >
String formatted according to IETF RFC 3986.
type: string
description: >
This type represents parameters to connect to a VIM for managing the
resources of a VNF instance.
This structure is used to convey VIM-related parameters over the Or-Vnfm
interface. Additional parameters for a VIM may be configured into the
VNFM by means outside the scope of the present document, and bound to
the identifier of that VIM.
type: object
required:
- id
- vimType
properties:
id:
description: >
The identifier of the VIM Connection. This identifier is managed by
the NFVO.
$ref: "#/definitions/Identifier"
vimId:
description: >
The identifier of the VIM instance. This identifier is managed by
the NFVO.
Shall be present to address additional information about the VIM if
such information has been configured into the VNFM by means outside
the scope of the present document, and should be absent otherwise.
$ref: "#/definitions/Identifier"
vimType:
description: >
Discriminator for the different types of the VIM information. The
value of this attribute determines the structure of the
"interfaceInfo" and "accessInfo" attributes, based on the type of the
VIM. The set of permitted values is expected to change over time as
new types or versions of VIMs become available.
The ETSI NFV registry of VIM-related information provides access to
information about VimConnectionInfo definitions for various VIM
types. The structure of the registry is defined in Annex C of SOL003.
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
interfaceInfo:
description: >
Information about the interface or interfaces to the VIM, if
applicable, such as the URI of an interface endpoint to
communicate with the VIM. The applicable keys are dependent on the
content of vimType.
Alternatively, such information may have been configured into the
VNFM and bound to the vimId.
$ref: "#/definitions/KeyValuePairs"
accessInfo:
description: >
Authentication credentials for accessing the VIM, and other
access-related information such as tenants or infrastructure
resource groups (see note). The applicable keys are dependent on the
content of vimType.
If the VimConnectionInfo structure is part of an HTTP response
payload body, sensitive attributes that are children of this attributes
(such as passwords) shall not be included.
If the VimConnectionInfo structure is part of an HTTP request payload
body, sensitive attributes that are children of this attribute (such
as passwords) shall be present if they have not been provisioned out
of band.
$ref: "#/definitions/KeyValuePairs"
extra:
description: >
VIM type specific additional information. The applicable structure,
and whether or not this attribute is available, is dependent on the
content of vimType.
$ref: "#/definitions/KeyValuePairs"
VnfExtCpConfig:
description: >
This type represents an externally provided link port or network address
information per instance of an external connection point. In case a link
port is provided, the VNFM shall use that link port when connecting the
external CP to the external VL. In a link port is not provided, the VNFM
shall create a link port on the external VL, and use that link port to
connect the external CP to the external VL.
type: object
properties:
cpInstanceId:
description: >
Identifier of the external CP instance to which this set of
configuration parameters is requested to be applied.
Shall be present if this instance has already been created.
$ref: "#/definitions/IdentifierInVnf"
linkPortId:
description: >
Identifier of a pre-configured link port to which the external CP
will be associated.
The following conditions apply to the attributes "linkPortId" and
"cpProtocolData":
* The "linkPortId" and "cpProtocolData" attributes shall both be
absent for the deletion of an existing external CP instance
addressed by cpInstanceId.
* At least one of these attributes shall be present for a
to-be-created external CP instance or an existing external
CP instance.
* If the "linkPortId" attribute is absent, the VNFM shall create a
link port.
* If the "cpProtocolData" attribute is absent, the "linkPortId"
attribute shall be provided referencing a pre-created link port,
and the VNFM can use means outside the scope of the present
document to obtain the pre-configured address information for the
connection point from the resource representing the link port.
* If both "cpProtocolData" and "linkportId" are provided, the API
consumer shall ensure that the cpProtocolData can be used with the
pre-created link port referenced by "linkPortId".
$ref: "#/definitions/Identifier"
cpProtocolData:
description: >
Parameters for configuring the network protocols on the link port
that connects the CP to a VL.
The following conditions apply to the attributes "linkPortId" and
"cpProtocolData":
* The "linkPortId" and "cpProtocolData" attributes shall both be
absent for the deletion of an existing external CP instance
addressed by cpInstanceId.
* At least one of these attributes shall be present for a
to-be-created external CP instance or an existing external
CP instance.
* If the "linkPortId" attribute is absent, the VNFM shall create a
link port.
* If the "cpProtocolData" attribute is absent, the "linkPortId"
attribute shall be provided referencing a pre-created link port,
and the VNFM can use means outside the scope of the present
document to obtain the pre-configured address information for the
connection point from the resource representing the link port.
* If both "cpProtocolData" and "linkportId" are provided, the API
consumer shall ensure that the cpProtocolData can be used with the
pre-created link port referenced by "linkPortId".
type: array
items:
$ref: "#/definitions/CpProtocolData"
VnfExtCpData:
description: >
This type represents configuration information for external CPs created
from a CPD.
cpdId:
description: >
The identifier of the CPD in the VNFD.
$ref: "#/definitions/IdentifierInVnfd"
List of instance data that need to be configured on the CP instances
created from the respective CPD.
$ref: "#/definitions/VnfExtCpConfig"
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
VnfInstanceSubscriptionFilter:
description: >
This type represents subscription filter criteria to match VNF
instances.
type: object
properties:
vnfdIds:
description: >
If present, match VNF instances that were created based on a VNFD
identified by one of the vnfdId values listed in this attribute.
The attributes "vnfdIds" and "vnfProductsFromProviders" are
alternatives to reference to VNF instances that are based on certain
VNFDs in a filter. They should not be used both in the same filter
instance, but one alternative should be chosen.
type: array
items:
$ref: "#/definitions/Identifier"
vnfProductsFromProviders:
description: >
If present, match VNF instances that belong to VNF products from
certain providers.
The attributes "vnfdIds" and "vnfProductsFromProviders" are
alternatives to reference to VNF instances that are based on certain
VNFDs in a filter. They should not be used both in the same filter
instance, but one alternative should be chosen.
type: array
items:
type: object
required:
- vnfProvider
properties:
vnfProvider:
description: >
Name of the VNF provider to match.
type: string
vnfProducts:
description: >
If present, match VNF instances that belong to VNF products
with certain product names, from one particular provider.
type: array
type: object
required:
- vnfProductName
properties:
vnfProductName:
description: >
Name of the VNF product to match.
type: string
versions:
description: >
If present, match VNF instances that belong to VNF
products with certain versions and a certain product
name, from one particular provider.
type: array
items:
type: object
required:
description: >
Software version to match.
$ref: "#/definitions/Version"
vnfdVersions:
description: >
If present, match VNF instances that belong to VNF
products with certain VNFD versions, a certain
software version and a certain product name, from
one particular provider.
type: array
vnfInstanceIds:
description: >
If present, match VNF instances with an instance identifier listed
in this attribute.
The attributes "vnfInstanceIds" and "vnfInstanceNames" are
alternatives to reference to particular VNF Instances in a filter.
They should not be used both in the same filter instance, but one
alternative should be chosen.
type: array
$ref: "#/definitions/Identifier"
vnfInstanceNames:
description: >
If present, match VNF instances with a VNF Instance Name listed in
this attribute.
The attributes "vnfInstanceIds" and "vnfInstanceNames" are
alternatives to reference to particular VNF Instances in a filter.
They should not be used both in the same filter instance, but one
alternative should be chosen.
type: array
items:
type: string
ApiVersionInformation:
description: >
This type represents API version information. It shall comply with the
provisions defined in table 4.4.1.13-1 (SOL003).
type: object
required:
- uriPrefix
- apiVersions
properties:
uriPrefix:
description: >
Specifies the URI prefix for the API, in the following
form {apiRoot}/{apiName}/{apiMajorVersion}/
type: string
apiVersions:
description: >
Version(s) supported for the API signaled by the
uriPrefix attribute.
type: array
items:
type: object
required:
- version
properties:
version:
description: >
Identifies a supported version. The value of the
version attribute shall be a version identifier as
specified in clause 4.6.1.
type: string
isDeprecated:
description: >
If such information is available, this attribute
indicates whether use of the version signaled by the
version attribute is deprecated (true) or not (false).
A deprecated version is still supported by the API producer
but is recommended not to be used any longer.
When a version is no longer supported, it does not appear in
the response body.
type: boolean
retirementDate:
description: >
The date and time after which the API version will no
longer be supported.
This attribute may be included if the value of the
isDeprecated attribute is set to true and shall be
absent otherwise.
$ref: "#/definitions/DateTime"