Newer
Older
The request may contain a "Range" HTTP header to obtain single
range of bytes from the VNF package file. This can be used to
continue an aborted transmission.
If the NFVO does not support range requests, it should return the
whole file with a 200 OK response instead.
in: header
type: string
- name: Version
description: >
Version of the API requested to use when responding to this request.
in: header
required: true
type: string
Shall be returned when the whole content of the artifact file has been read successfully.
The payload body shall contain a copy of the artifact file from the VNF package,
as defined by ETSI GS NFV-SOL 004.
The "Content-Type" HTTP header shall be set according to the content type of the artifact file.
If the content type cannot be determined, the header shall be set to the value "application/octet-stream".
headers:
Content-Type:
description: >
The MIME type of the body of the response.
The "Content-Type" HTTP header shall be set according to the
content type of the artifact file. If the content type cannot
be determined, the header shall be set to the value
"application/octet-stream".
type: string
maximum: 1
minimum: 1
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
If the NFVO supports range requests, this response shall be returned
when a single consecutive byte range from the content of the artifact
file, if the NFVO supports range requests has been read successfully
according to the request.
The response body shall contain the requested part of the VNF
package file.
The "Content-Range" HTTP header shall be provided according to
IETF RFC 7233.
The "Content-Type" HTTP header shall be set as defined above for
the "200 OK" response.
headers:
Content-Range:
type: string
maximum: 1
minimum: 1
Content-Type:
description: The MIME type of the body of the response.
type: string
maximum: 1
minimum: 1
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
400:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/400"
401:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/401"
403:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/403"
404:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
405:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/405"
406:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/406"
description: >
Shall be returned upon the following error: The operation cannot
be executed currently, due to a conflict with the state of the resource.
Typically, this is due to the fact that "onboardingState" of the
VNF package has a value different from "ONBOARDED".
The response body shall contain a ProblemDetails structure,
in which the "detail" attribute shall convey more information
about the error.
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/409"
description: >
416 RANGE NOT SATISFIABLE
Shall be returned upon the following error: The byte range passed in the
"Range" header did not match any available byte range in the artifact file
(e.g. "access after end of file").
The response body may contain a ProblemDetails structure.
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/416"
500:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/500"
503:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/503"
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
504:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/504"
'/onboarded_vnf_packages/{vnfdId}/artifacts/{artifactPath}':
parameters:
- name: artifactPath
description: >
Sequence of one or more path segments representing the path of
the artifact within the VNF package, relative to the root of the package.
EXAMPLE: foo/bar/run.sh
This identifier can be retrieved from the "artifactPath" attribute
of the applicable "additionalArtifacts" entry in the body of the
response to a GET request querying the "Individual VNF package" or
the "VNF packages" resource.
in: path
type: string
required: true
- name: vnfdId
description: >
Identifier of the VNFD and the VNF package.
The identifier is allocated by the VNF provider.
This identifier can be retrieved from the "vnfdId" attribute
in the VnfPackageOnboardingNotification or VnfPackageChangeNotification.
in: path
type: string
required: true
get:
description: >
Fetch VNF Package Artifacts.
The GET method fetches the content of an artifact within a VNF package.
This method shall follow the provisions specified in the tables
10.4.6.3.2-1 and 10.4.6.3.2-2 for URI query parameters, request
and response data structures, and response codes.
parameters:
- name: Accept
description: >
Content-Types that are acceptable for the response.
in: header
required: true
type: string
- name: Authorization
description: >
The authorization token for the request.
Reference: IETF RFC 7235
in: header
required: false
type: string
- name: Range
description: >
The request may contain a "Range" HTTP header to obtain single
range of bytes from the VNF package file. This can be used to
continue an aborted transmission.
If the NFVO does not support range requests, it should return the
whole file with a 200 OK response instead.
in: header
type: string
- name: Version
description: >
Version of the API requested to use when responding to this request.
in: header
required: true
type: string
responses:
200:
description: >
200 OK
Shall be returned when the whole content of the artifact file has been read successfully.
The payload body shall contain a copy of the artifact file from the VNF package,
as defined by ETSI GS NFV-SOL 004.
The "Content-Type" HTTP header shall be set according to the content type of the artifact file.
If the content type cannot be determined, the header shall be set to the value "application/octet-stream".
headers:
Content-Type:
description: >
The MIME type of the body of the response.
The "Content-Type" HTTP header shall be set according to the
content type of the artifact file. If the content type cannot
be determined, the header shall be set to the value
"application/octet-stream".
type: string
maximum: 1
minimum: 1
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
206:
description: >
206 PARTIAL CONTENT
If the NFVO supports range requests, this response shall be returned
when a single consecutive byte range from the content of the artifact
file, if the NFVO supports range requests has been read successfully
according to the request.
The response body shall contain the requested part of the VNF
package file.
The "Content-Range" HTTP header shall be provided according to
IETF RFC 7233.
The "Content-Type" HTTP header shall be set as defined above for
the "200 OK" response.
headers:
Content-Range:
type: string
maximum: 1
minimum: 1
Content-Type:
description: The MIME type of the body of the response.
type: string
maximum: 1
minimum: 1
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
400:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/400"
401:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/401"
403:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/403"
404:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
405:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/405"
406:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/406"
409:
description: >
Shall be returned upon the following error: The operation cannot
be executed currently, due to a conflict with the state of the resource.
Typically, this is due to the fact that "onboardingState" of the
VNF package has a value different from "ONBOARDED".
The response body shall contain a ProblemDetails structure,
in which the "detail" attribute shall convey more information
about the error.
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/409"
416:
description: >
416 RANGE NOT SATISFIABLE
Shall be returned upon the following error: The byte range passed in the
"Range" header did not match any available byte range in the artifact file
(e.g. "access after end of file").
The response body may contain a ProblemDetails structure.
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/416"
500:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/500"
503:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/503"
504:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/504"
###############################################################################
# Subscriptions #
###############################################################################
'/subscriptions':
post:
description: >
The POST method creates a new subscription.
Creation of two subscription resources with the same callbackURI and
the same filter can result in performance degradation and will provide
duplicates of notifications to the VNFM, and might make sense only in
very rare use cases. Consequently, the NFVO may either allow creating
a subscription resource if another subscription resource with the same
filter and callbackUri already exists (in which case it shall return
the “201 Created” response code), or may decide to not create a
duplicate subscription resource (in which case it shall return a
“303 See Other” response code referencing the existing subscription
resource with the same filter and callbackUri).
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
parameters:
- name: PkgmSubscriptionRequest
description: >
Representation of the created subscription resource.
The HTTP response shall include a "Location" HTTP header that
points to the created subscription resource.
in: body
required: true
schema:
$ref: "definitions/VNFPackageManagement_def.yaml#/definitions/PkgmSubscriptionRequest"
- name: Accept
description: >
Content-Types that are acceptable for the response.
Reference: IETF RFC 7231
in: header
required: true
type: string
- name: Authorization
description: >
The authorization token for the request.
Reference: IETF RFC 7235
in: header
type: string
- name: Content-Type
description: >
The MIME type of the body of the request.
Reference: IETF RFC 7231
in: header
required: true
type: string
- name: Version
description: >
Version of the API requested to use when responding to this request.
in: header
required: true
type: string
Representation of the created subscription resource.
The HTTP response shall include a "Location" HTTP header that
points to the created subscription resource.
headers:
Content-Type:
description: The MIME type of the body of the response.
type: string
maximum: 1
minimum: 1
Location:
description: The resource URI of the created VNF instance
type: string
format: url
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
schema:
type: array
items:
$ref: "definitions/VNFPackageManagement_def.yaml#/definitions/PkgmSubscription"
303:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/303"
400:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/400"
401:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/401"
403:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/403"
404:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
405:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
406:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/406"
416:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/416"
500:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/500"
503:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/503"
get:
description: >
The GET method queries the list of active subscriptions of the
functional block that invokes the method. It can be used e.g. for
resynchronization after error situations.
parameters:
- name: Accept
description: >
Content-Types that are acceptable for the response.
Reference: IETF RFC 7231
in: header
required: true
type: string
- name: Authorization
description: >
The authorization token for the request.
Reference: IETF RFC 7235
in: header
Samir Medjiah
committed
- name: filter
description: >
Attribute-based filtering expression according to clause 4.3.2.
The VNFM shall support receiving this parameter as part of the
URI query string. The NFVO may supply this parameter.
All attribute names that appear in the PkgmSubscription and in
data types referenced from it shall be supported by the VNFM in
the filter expression.
in: query
required: false
type: string
- name: nextpage_opaque_marker
description: >
Marker to obtain the next page of a paged response. Shall be
supported by the VNFM if the VNFM supports alternative 2 (paging)
according to clause 4.7.2.1 for this resource.
in: query
required: false
type: string
- name: Version
description: >
Version of the API requested to use when responding to this request.
in: header
required: true
type: string
Samir Medjiah
committed
The list of subscriptions was queried successfully.
The representations body shall contain in an array the representations
of all active subscriptions of the functional block that invokes the
method , i.e. zero or more representations of VNF package Management
subscriptions as defined in clause 10.5.2.4.
If the VNFM supports alternative 2 (paging) according to clause
4.7.2.1 for this resource, inclusion of the Link HTTP header in
this response shall follow the provisions in clause 4.7.2.3.
headers:
Content-Type:
description: The MIME type of the body of the response.
type: string
maximum: 1
minimum: 1
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
Link:
description: >
Reference to other resources. Used for paging in the present document, see clause 4.7.2.1.
type: string
maximum: 1
minimum: 0
schema:
type: array
items:
$ref: "definitions/VNFPackageManagement_def.yaml#/definitions/PkgmSubscription"
400:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/400"
401:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/401"
403:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/403"
404:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
405:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
406:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/406"
416:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/416"
500:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/500"
503:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/503"
###############################################################################
# Individual subscription #
###############################################################################
'/subscriptions/{subscriptionId}':
#SOL003 location: 10.4.8
parameters:
- name: subscriptionId
description: >
Identifier of this subscription.
This identifier can be retrieved from the resource referenced by
the "Location" HTTP header in the response to a POST request
creating a new subscription resource. It can also be retrieved from
the "id" attribute in the payload body of that response.
in: path
type: string
required: true
get:
description: >
The GET method reads an individual subscription.
parameters:
- name: Accept
description: >
Content-Types that are acceptable for the response.
Reference: IETF RFC 7231
in: header
required: true
type: string
- name: Authorization
description: >
The authorization token for the request.
Reference: IETF RFC 7235
in: header
- name: Version
description: >
Version of the API requested to use when responding to this request.
in: header
required: true
type: string
Representation of the subscription resource.
headers:
Content-Type:
description: The MIME type of the body of the response.
type: string
maximum: 1
minimum: 1
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
schema:
$ref: "definitions/VNFPackageManagement_def.yaml#/definitions/PkgmSubscription"
400:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/400"
401:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/401"
403:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/403"
404:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
405:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
406:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/406"
416:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/416"
500:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/500"
503:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/503"
delete:
description: >
The DELETE method terminates an individual subscription.
parameters:
- name: Authorization
description: >
The authorization token for the request.
Reference: IETF RFC 7235
in: header
- name: Version
description: >
Version of the API requested to use when responding to this request.
in: header
required: true
type: string
The subscription resource was deleted successfully.
headers:
WWW-Authenticate:
description: >
Challenge if the corresponding HTTP request has not provided
authorization, or error details if the corresponding HTTP
request has provided an invalid authorization token.
type: string
maximum: 1
minimum: 0
Version:
description: >
Version of the API used in the response.
type: string
maximum: 1
minimum: 1
400:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/400"
401:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/401"
403:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/403"
404:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
405:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/404"
406:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/406"
416:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/416"
500:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/500"
503:
$ref: "../../responses/SOL002SOL003_resp.yaml#/responses/503"