Commit 93e61acb authored by Michele Carignani's avatar Michele Carignani
Browse files

YAML files updated to SOL001 v2.6.1.

parent 6bbac9e1
Pipeline #473 failed with stages
tosca_definitions_version: tosca_simple_yaml_1_2
description: ETSI NFV SOL 001 common types definitions version 2.6.1
data_types:
tosca.datatypes.nfv.L2AddressData:
derived_from: tosca.datatypes.Root
description: Describes the information on the MAC addresses to be assigned to a connection point.
properties:
mac_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
tosca.datatypes.nfv.L3AddressData:
derived_from: tosca.datatypes.Root
description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP
properties:
ip_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
floating_ip_activated:
type: boolean
description: Specifies if the floating IP scheme is activated on the Connection Point or not
required: true
ip_address_type:
type: string
description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp
required: false
constraints:
- valid_values: [ ipv4, ipv6 ]
number_of_ip_address:
type: integer
description: Minimum number of IP addresses to be assigned
required: false
constraints:
- greater_than: 0
tosca.datatypes.nfv.AddressData:
derived_from: tosca.datatypes.Root
description: Describes information about the addressing scheme and parameters applicable to a CP
properties:
address_type:
type: string
description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point
required: true
constraints:
- valid_values: [ mac_address, ip_address ]
l2_address_data:
type: tosca.datatypes.nfv.L2AddressData
description: Provides the information on the MAC addresses to be assigned to a connection point.
required: false
l3_address_data:
type: tosca.datatypes.nfv.L3AddressData
description: Provides the information on the IP addresses to be assigned to a connection point
required: false
tosca.datatypes.nfv.ConnectivityType:
derived_from: tosca.datatypes.Root
description: describes additional connectivity information of a virtualLink
properties:
layer_protocols:
type: list
description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
flow_pattern:
type: string
description: Identifies the flow pattern of the connectivity
required: false
constraints:
- valid_values: [ line, tree, mesh ]
tosca.datatypes.nfv.LinkBitrateRequirements:
derived_from: tosca.datatypes.Root
description: describes the requirements in terms of bitrate for a virtual link
properties:
root:
type: integer # in bits per second
description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).
required: true
constraints:
- greater_or_equal: 0
leaf:
type: integer # in bits per second
description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches).
required: false
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.CpProtocolData:
derived_from: tosca.datatypes.Root
description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information
properties:
associated_layer_protocol:
type: string
required: true
description: One of the values of the property layer_protocols of the CP
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
address_data:
type: list
description: Provides information on the addresses to be assigned to the CP
entry_schema:
type: tosca.datatypes.nfv.AddressData
required: false
tosca.datatypes.nfv.VnfProfile:
derived_from: tosca.datatypes.Root
description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF.
properties:
instantiation_level:
type: string
description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used.
required: false
min_number_of_instances:
type: integer
description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.
required: true
constraints:
- greater_or_equal: 0
max_number_of_instances:
type: integer
description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.
required: true
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.Qos:
derived_from: tosca.datatypes.Root
description: describes QoS data for a given VL used in a VNF deployment flavour
properties:
latency:
type: scalar-unit.time #Number
description: Specifies the maximum latency
required: true
constraints:
- greater_than: 0 s
packet_delay_variation:
type: scalar-unit.time #Number
description: Specifies the maximum jitter
required: true
constraints:
- greater_or_equal: 0 s
packet_loss_ratio:
type: float
description: Specifies the maximum packet loss ratio
required: false
constraints:
- in_range: [ 0.0, 1.0 ]
capability_types:
tosca.capabilities.nfv.VirtualLinkable:
derived_from: tosca.capabilities.Node
description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type
relationship_types:
tosca.relationships.nfv.VirtualLinksTo:
derived_from: tosca.relationships.DependsOn
description: Represents an association relationship between the VduCp and VnfVirtualLink node types
valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ]
node_types:
tosca.nodes.nfv.Cp:
derived_from: tosca.nodes.Root
description: Provides information regarding the purpose of the connection point
properties:
layer_protocols:
type: list
description: Identifies which protocol the connection point uses for connectivity purposes
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
role: #Name in ETSI NFV IFA011 v0.7.3: cpRole
type: string
description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS
required: false
constraints:
- valid_values: [ root, leaf ]
description:
type: string
description: Provides human-readable information on the purpose of the connection point
required: false
protocol:
type: list
description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor
required: false
entry_schema:
type: tosca.datatypes.nfv.CpProtocolData
trunk_mode:
type: boolean
description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other), When operating in "trunk mode", the Cp is capable of carrying traffic for several VLANs. Absence of this property implies that trunkMode is not configured for the Cp i.e. It is equivalent to boolean value "false".
required: false
tosca_definitions_version: tosca_simple_yaml_1_2 tosca_definitions_version: tosca_simple_yaml_1_2
description: ETSI NFV SOL 001 nsd types definitions version 2.5.1 description: ETSI NFV SOL 001 nsd types definitions version 2.6.1
imports: imports:
- etsi_nfv_sol001_vnfd_types.yaml - etsi_nfv_sol001_common_types.yaml
data_types: data_types:
tosca.datatypes.nfv.ServiceAvailability: tosca.datatypes.nfv.ServiceAvailability:
...@@ -16,78 +16,6 @@ data_types: ...@@ -16,78 +16,6 @@ data_types:
constraints: constraints:
- valid_values: [ level1, level2, level3 ] - valid_values: [ level1, level2, level3 ]
tosca.datatypes.nfv.L2AddressData:
derived_from: tosca.datatypes.Root
description: Describes the information on the MAC addresses to be assigned to a connection point.
properties:
mac_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
tosca.datatypes.nfv.L3AddressData:
derived_from: tosca.datatypes.Root
description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP
properties:
ip_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
floating_ip_activated:
type: boolean
description: Specifies if the floating IP scheme is activated on the Connection Point or not
required: true
ip_address_type:
type: string
description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp
required: false
constraints:
- valid_values: [ ipv4, ipv6 ]
number_of_ip_address:
type: integer
description: Minimum number of IP addresses to be assigned
required: false
constraints:
- greater_than: 0
tosca.datatypes.nfv.AddressData:
derived_from: tosca.datatypes.Root
description: Describes information about the addressing scheme and parameters applicable to a CP
properties:
address_type:
type: string
description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point
required: true
constraints:
- valid_values: [ mac_address, ip_address ]
l2_address_data:
type: tosca.datatypes.nfv.L2AddressData
description: Provides the information on the MAC addresses to be assigned to a connection point.
required: false
l3_address_data:
type: tosca.datatypes.nfv.L3AddressData
description: Provides the information on the IP addresses to be assigned to a connection point
required: false
tosca.datatypes.nfv.ConnectivityType:
derived_from: tosca.datatypes.Root
description: describes additional connectivity information of a virtualLink
properties:
layer_protocols:
type: list
description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
flow_pattern:
type: string
description: Identifies the flow pattern of the connectivity
required: false
constraints:
- valid_values: [ line, tree, mesh ]
tosca.datatypes.nfv.NsVlProfile: tosca.datatypes.nfv.NsVlProfile:
derived_from: tosca.datatypes.Root derived_from: tosca.datatypes.Root
description: Describes additional instantiation data for a given NsVirtualLink used in a specific NS deployment flavour. description: Describes additional instantiation data for a given NsVirtualLink used in a specific NS deployment flavour.
...@@ -108,200 +36,42 @@ data_types: ...@@ -108,200 +36,42 @@ data_types:
type: tosca.datatypes.nfv.ServiceAvailability type: tosca.datatypes.nfv.ServiceAvailability
description: Network service virtual link service availability levels, as described in ETSI GS NFV-REL 001 description: Network service virtual link service availability levels, as described in ETSI GS NFV-REL 001
required: false required: false
tosca.datatypes.nfv.VirtualLinkProtocolData:
derived_from: tosca.datatypes.Root
description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour
properties:
associated_layer_protocol:
type: string
description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property.
required: true
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
l2_protocol_data:
type: tosca.datatypes.nfv.L2ProtocolData
description: Specifies the L2 protocol data for a virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise.
required: false
l3_protocol_data:
type: tosca.datatypes.nfv.L3ProtocolData
description: Specifies the L3 protocol data for this virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise.
required: false
tosca.datatypes.nfv.L2ProtocolData:
derived_from: tosca.datatypes.Root
description: describes L2 protocol data for a given virtual link used in a specific VNF deployment flavour.
properties:
name:
type: string
description: Identifies the network name associated with this L2 protocol.
required: false
network_type:
type: string
description: Specifies the network type for this L2 protocol.The value may be overridden at run-time.
required: false
constraints:
- valid_values: [ flat, vlan, vxlan, gre ]
vlan_transparent:
type: boolean
description: Specifies whether to support VLAN transparency for this L2 protocol or not.
required: false
default: false
mtu:
type: integer
description: Specifies the maximum transmission unit (MTU) value for this L2 protocol.
required: false
constraints:
- greater_than: 0
tosca.datatypes.nfv.L3ProtocolData:
derived_from: tosca.datatypes.Root
description: describes L3 protocol data for a given virtual link used in a specific VNF deployment flavour.
properties:
name:
type: string
description: Identifies the network name associated with this L3 protocol.
required: false
ip_version:
type: string
description: Specifies IP version of this L3 protocol.The value of the ip_version property shall be consistent with the value of the layer_protocol in the connectivity_type property of the virtual link node.
required: true
constraints:
- valid_values: [ ipv4, ipv6 ]
cidr:
type: string
description: Specifies the CIDR (Classless Inter-Domain Routing) of this L3 protocol. The value may be overridden at run-time.
required: true
ip_allocation_pools:
type: list
description: Specifies the allocation pools with start and end IP addresses for this L3 protocol. The value may be overridden at run-time.
required: false
entry_schema:
type: tosca.datatypes.nfv.IpAllocationPool
gateway_ip:
type: string
description: Specifies the gateway IP address for this L3 protocol. The value may be overridden at run-time.
required: false
dhcp_enabled:
type: boolean
description: Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. The value may be overridden at run-time.
required: false
ipv6_address_mode:
type: string
description: Specifies IPv6 address mode. May be present when the value of the ipVersion attribute is "ipv6" and shall be absent otherwise. The value may be overridden at run-time.
required: false
constraints:
- valid_values: [ slaac, dhcpv6-stateful, dhcpv6-stateless ]
tosca.datatypes.nfv.IpAllocationPool:
derived_from: tosca.datatypes.Root
description: Specifies a range of IP addresses
properties:
start_ip_address:
type: string
description: The IP address to be used as the first one in a pool of addresses derived from the cidr block full IP range
required: true
end_ip_address:
type: string
description: The IP address to be used as the last one in a pool of addresses derived from the cidr block full IP range
required: true
tosca.datatypes.nfv.LinkBitrateRequirements:
derived_from: tosca.datatypes.Root
description: describes the requirements in terms of bitrate for a virtual link
properties:
root:
type: integer # in bits per second
description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).
required: true
constraints:
- greater_or_equal: 0
leaf:
type: integer # in bits per second
description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches).
required: false
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.NsVirtualLinkQos: tosca.datatypes.nfv.NsVirtualLinkQos:
derived_from: tosca.datatypes.nfv.Qos derived_from: tosca.datatypes.nfv.Qos
description: describes QoS data for a given VL used in a VNF deployment flavour description: describes QoS data for a given VL used in a VNF deployment flavour
properties: properties:
priority: priority:
type: integer type: integer
constraints:
- greater_or_equal: 0
description: Specifies the priority level in case of congestion on the underlying physical links description: Specifies the priority level in case of congestion on the underlying physical links
required: false required: false
tosca.datatypes.nfv.CpProtocolData: tosca.datatypes.nfv.NsProfile:
derived_from: tosca.datatypes.Root
description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information
properties:
associated_layer_protocol:
type: string
required: true
description: One of the values of the property layer_protocols of the CP
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
address_data:
type: list
description: Provides information on the addresses to be assigned to the CP
entry_schema:
type: tosca.datatypes.nfv.AddressData
tosca.datatypes.nfv.VnfProfile:
derived_from: tosca.datatypes.Root derived_from: tosca.datatypes.Root
description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF. description: describes a profile for instantiating NSs of a particular NS DF according to a specific NSD and NS DF.
properties: properties:
instantiation_level: ns_instantiation_level:
type: string type: string
description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used. description: Identifier of the instantiation level of the NS DF to be used for instantiation. If not present, the default instantiation level as declared in the NSD shall be used.
required: false required: false
min_number_of_instances: min_number_of_instances:
type: integer type: integer
description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. description: Minimum number of instances of the NS based on this NSD that is permitted to exist for this NsProfile.
required: true required: true
constraints: constraints:
- greater_or_equal: 0 - greater_or_equal: 0
max_number_of_instances: max_number_of_instances:
type: integer type: integer
description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. description: Maximum number of instances of the NS based on this NSD that is permitted to exist for this NsProfile.
required: true required: true
constraints: constraints:
- greater_or_equal: 0 - greater_or_equal: 0
flavour_id:
tosca.datatypes.nfv.Qos: type: string
derived_from: tosca.datatypes.Root description: Identifies the applicable network service DF within the scope of the NSD.
description: describes QoS data for a given VL used in a VNF deployment flavour
properties:
latency:
type: scalar-unit.time #Number
description: Specifies the maximum latency
required: true
constraints:
- greater_than: 0 s
packet_delay_variation:
type: scalar-unit.time #Number
description: Specifies the maximum jitter
required: true required: true
constraints:
- greater_or_equal: 0 s
packet_loss_ratio:
type: float
description: Specifies the maximum packet loss ratio
required: false
constraints:
- in_range: [ 0.0, 1.0 ]
capability_types:
tosca.capabilities.nfv.VirtualLinkable:
derived_from: tosca.capabilities.Node
description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type
relationship_types:
tosca.relationships.nfv.VirtualLinksTo:
derived_from: tosca.relationships.DependsOn
description: Represents an association relationship between the VNF or PNF or Sap of a Nested NS and NsVirtualLink node types
valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ]
interface_types: interface_types:
tosca.interfaces.nfv.Nslcm: tosca.interfaces.nfv.Nslcm:
...@@ -317,7 +87,7 @@ interface_types: ...@@ -317,7 +87,7 @@ interface_types:
description: Preamble to execution of the terminate operation description: Preamble to execution of the terminate operation
terminate: terminate:
description: Base procedure for terminating an NS, corresponding to the Terminate NS operation defined in GS NFV-IFA 013. description: Base procedure for terminating an NS, corresponding to the Terminate NS operation defined in GS NFV-IFA 013.
terminate _end: terminate_end:
description: Postamble to the execution of the terminate operation description: Postamble to the execution of the terminate operation
update_start: update_start:
description: Preamble to execution of the update operation description: Preamble to execution of the update operation
...@@ -329,14 +99,15 @@ interface_types: ...@@ -329,14 +99,15 @@ interface_types:
description: Preamble to execution of the scale operation description: Preamble to execution of the scale operation
scale: scale:
description: Base procedure for scaling an NS, corresponding to the Scale NS operation defined in GS NFV-IFA 013. description: Base procedure for scaling an NS, corresponding to the Scale NS operation defined in GS NFV-IFA 013.
scale _end: scale_end:
description: Postamble to the execution of the scale operation description: Postamble to the execution of the scale operation
heal_start: heal_start:
description: Preamble to execution of the heal operation description: Preamble to execution of the heal operation
heal: heal:
description: Base procedure for healing an NS, corresponding to the Heal NS operation defined in GS NFV-IFA 013. description: Base procedure for healing an NS, corresponding to the Heal NS operation defined in GS NFV-IFA 013.
heal _end: heal_end:
description: Postamble to the execution of the heal operation description: Postamble to the execution of the heal operation
group_types: group_types:
tosca.groups.nfv.PlacementGroup: tosca.groups.nfv.PlacementGroup:
derived_from: tosca.groups.Root derived_from: tosca.groups.Root
...@@ -349,39 +120,6 @@ group_types: ...@@ -349,39 +120,6 @@ group_types:
members: [ tosca.nodes.nfv.VNF, tosca.nodes.nfv.NsVirtualLink, tosca.nodes.nfv.NS ] members: [ tosca.nodes.nfv.VNF, tosca.nodes.nfv.NsVirtualLink, tosca.nodes.nfv.NS ]
node_types: node_types:
tosca.nodes.nfv.Cp:
derived_from: tosca.nodes.Root
description: Provides information regarding the purpose of the connection point
properties:
layer_protocols:
type: list
description: Identifies which protocol the connection point uses for connectivity purposes
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
role: #Name in ETSI NFV IFA011 v0.7.3: cpRole
type: string
description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS
required: false
constraints:
- valid_values: [ root, leaf ]
description:
type: string
description: Provides human-readable information on the purpose of the connection point
required: false
protocol:
type: list
description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor
required: true
entry_schema:
type: tosca.datatypes.nfv.CpProtocolData
trunk_mode:
type: boolean
description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other)
required: true
tosca.nodes.nfv.NS: tosca.nodes.nfv.NS:
derived_from: tosca.nodes.Root derived_from: tosca.nodes.Root
properties: properties:
...@@ -405,6 +143,14 @@ node_types: ...@@ -405,6 +143,14 @@ node_types:
type: string type: string
description: Identifies an NSD in a version independent manner. This attribute is invariant across versions of NSD. description: Identifies an NSD in a version independent manner. This attribute is invariant across versions of NSD.
required: true required: true
flavour_id: